Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.
Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.
Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.
Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.
Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to concurrent work by myself and Jason, a normal fast forward merge
was not possible. This brings in a number of hfi1 changes, mainly the
hfi1 TID RDMA support (roughly 10,000 LOC change), which was reviewed
and integrated over a period of days.
Signed-off-by: Doug Ledford <dledford@redhat.com>
When an application aborts the connection by moving QP from RTS to ERROR,
then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the
*srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the
connection by calling c4iw_ep_disconnect().
c4iw_ep_disconnect() does the following:
1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4.
2. sends abort request CPL to hw.
But, since the close_complete_upcall() is sent before sending the
ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the
connection holds one. Because, the srqidx is passed up to libcxgb4 only
after corresponding ABORT_RPL is processed by kernel in abort_rpl().
This patch handle the corner-case by moving the call to
close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl(). So that
libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and
libcxgb4 can relinquish the srqidx properly.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If TP fetches an SRQ buffer but ends up not using it before the connection
is aborted, then it passes the index of that SRQ buffer to the host in
ABORT_REQ_RSS or ABORT_RPL CPL message.
But, if the srqidx field is zero in the received ABORT_RPL or
ABORT_REQ_RSS CPL, then we need to read the tcb.rq_start field to see if
it really did have an RQE cached. This works around a case where HW does
not include the srqidx in the ABORT_RPL/ABORT_REQ_RSS CPL.
The final value of rq_start is the one present in TCB with the
TF_RX_PDU_OUT bit cleared. So, we need to read the TCB, examine the
TF_RX_PDU_OUT (bit 49 of t_flags) in order to determine if there's a rx
PDU feedback event pending.
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The locking here started out with a single lock that covered everything
and then has lately veered into crazy town.
The fundamental problem is that several places need to iterate over a
linked list, but also need to drop their locks to avoid deadlock during
client callbacks.
xarray's restartable iteration offers a simple solution to the
problem. Once all the lists are xarrays we can drop locks in the places
that need that and rely on xarray to provide consistency and locking for
the data structure.
The resulting simplification is that each of the three lists has a
dedicated rwsem that must be held when working with the list it
covers. One data structure is no longer covered by multiple locks.
The sleeping semaphore is selected because the read side generally needs
to be held over something sleeping, and using RCU reader locking in those
cases is overkill.
In the process this simplifies the entire registration/unregistration flow
to be the expected list of setups and the reversed list of matching
teardowns, and the registration lock 'refcount' can now be revised to be
released after the ULPs are removed, providing a very sane semantic for
this feature.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that we have a small ID for each client we can use xarray instead of
linearly searching linked lists for client data. This will give much
faster and scalable client data lookup, and will lets us revise the
locking scheme.
Since xarray can store 'going_down' using a mark just entirely eliminate
the struct ib_client_data and directly store the client_data value in the
xarray. However this does require a special iterator as we must still
iterate over any NULL client_data values.
Also eliminate the client_data_lock in favour of internal xarray locking.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This gives each client a unique ID and will let us move client_data to use
xarray, and revise the locking scheme.
clients have to be add/removed in strict FIFO/LIFO order as they
interdepend. To support this the client_ids are assigned to increase in
FIFO order. The existing linked list is kept to support reverse iteration
until xarray can get a reverse iteration API.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
ida is the proper data structure to hold list of clustered small integers
and then allocate an unused integer. Get rid of the convoluted and limited
open-coded bitmap.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This really has no purpose anymore, refcount can be used to tell if the
device is still registered. Keeping it around just invites mis-use.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Instead of complicated logic about when this memory is freed, always free
it during device release(). All the cache pointers start out as NULL, so
it is safe to call this before the cache is initialized.
This makes for a simpler error unwind flow, and a simpler understanding of
the lifetime of the memory allocations inside the struct ib_device.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since this only frees memory it should be done during the release
callback. Otherwise there are possible error flows where it might not get
called if registration aborts.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since another rename could be running in parallel it is safer to check
that the name is not changing inside the lock, where we already know the
device name will not change.
Fixes: d21943dd19 ("RDMA/core: Implement IB device rename function")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
The PD allocations in IB/core allows us to simplify drivers and their
error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand
in had with relevant update in .dealloc_pd().
We will use this opportunity and convert .dealloc_pd() to don't fail, as
it was suggested a long time ago, failures are not happening as we have
never seen a WARN_ON print.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add new macros to be used in drivers while registering ops structure and
IB/core while calling allocation routines, so drivers won't need to
perform kzalloc/kfree in their paths.
The change in allocation stage allows us to initialize common fields prior
to calling to drivers (e.g. restrack).
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When creating many MAD agents in a short period of time, receive packet
processing can be delayed long enough to cause timeouts while new agents
are being added to the atomic notifier chain with IRQs disabled. Notifier
chain registration and unregstration is an O(n) operation. With large
numbers of MAD agents being created and destroyed simultaneously the CPUs
spend too much time with interrupts disabled.
Instead of each MAD agent registering for it's own LSM notification,
maintain a list of agents internally and register once, this registration
already existed for handling the PKeys. This list is write mostly, so a
normal spin lock is used vs a read/write lock. All MAD agents must be
checked, so a single list is used instead of breaking them down per
device.
Notifier calls are done under rcu_read_lock, so there isn't a risk of
similar packet timeouts while checking the MAD agents security settings
when notified.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the MAD agents isn't allowed to manage the subnet, or fails to register
for the LSM notifier, the security context is leaked. Free the context in
these cases.
Fixes: 47a2b338fe ("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the notifier runs after the security context is freed an access of
freed memory can occur.
Fixes: 47a2b338fe ("IB/core: Enforce security on management datagrams")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move the call to usnic_ib_device_remove after usnic_ib_ibdev_list_lock has
been released.
Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When IPv6 support was added, the correct tos was not passed to
cxgb_find_route6(). This potentially results in the wrong route entry.
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
import_ep() is passed the correct tos, but doesn't use it correctly.
Fixes: ac8e4c69a0 ("cxgb4/iw_cxgb4: TOS support")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the parent listening endpoint has a service type set, then use that
when setting up the connection. This allows server-side applications to
mandate the tos for passive side connections via rdma_set_service_type()
on the listening endpoints.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This allows drivers to know the tos was actively set by the application.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If a user binds to INADDR_ANY and sets the service id, then the
device-specific cm_ids should also use this tos. This allows an app to
do:
rdma_bind_addr(INADDR_ANY)
set_service_type()
rdma_listen()
And connections setup via this listening endpoint will use the correct
tos.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Define new option in 'rdma_set_option' to override calculated QP timeout
when requested to provide QP attributes to modify a QP.
At the same time, pack tos_set to be bitfield.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User space verbs provider library would need chip context. Changing the
ABI to add chip version details in structure. Furthermore, changing the
kernel driver ucontext allocation code to initialize the abi structure
with appropriate values.
As suggested by community, appended the new fields at the bottom of the
ABI structure and retaining to older fields as those were in the older
versions.
Keeping the ABI version at 1 and adding a new field in the ucontext
response structure to hold the component mask. The user space library
should check pre-defined flags to figure out if a certain feature is
supported on not.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The new 57500 series of adapter has bigger psn search structure. The size
of new structure is 16B. Changing the control path memory allocation and
fast path code to accommodate the new psn structure while maintaining the
backward compatibility.
There are few additional changes listed below:
- For 57500 chip max-sge are limited to 6 for now.
- For 57500 chip max-receive-sge should be set to 6 for now.
- Add driver/hardware interface structure for new chip.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the new 57500 series of adapters the GSI qp is a UD type QP unlike the
previous generation where it was a Raw Eth QP. Changing the control and
data path to support the same. Listing all the significant diffs:
- AH creation resolve network type unconditionally
- Add check at relevant places to distinguish from Raw Eth
processing flow.
- bnxt_re_process_res_ud_wc report completion with GRH flag
when qp is GSI.
- Change length, cfa_meta and smac to match new driver/hardware
interface.
- Add new driver/hardware interface.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The backing store to keep HW context data structures is allocated and
initialized by L2 driver. For 57500 chip RoCE driver do not require to
allocate and initialize additional memory. Changing to skip duplicate
allocation and initialization for 57500 adapters. Driver continues as
before for older chips.
This patch also takes care of stats context memory alignment to 128
boundary, a requirement for 57500 series of chip. Older chips do not care
of alignment, thus the change is unconditional.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The new chip series has 64 bit doorbell for notification queues. Thus,
both control and data path event queues need new routines to write 64 bit
doorbell. Adding the same. There is new doorbell interface between the
chip and driver. Changing the chip specific data structure definitions.
Additional significant changes are listed below
- bnxt_re_net_ring_free/alloc takes a new argument
- bnxt_qplib_enable_nq and enable_rcfw uses new doorbell offset
for new chip.
- DB mapping for NQ and CREQ now maps 8 bytes.
- DBR_DBR_* macros renames to DBC_DBC_*
- store nq_db_offset in a 32bit data type.
- got rid of __iowrite64_copy, used writeq instead.
- changed the DB header initialization to simpler scheme.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding setup and destroy routines for chip-context. The chip context would
be used frequently in control and data path to take execution flow
depending on the chip type. chip context structure pointer is added to
the relevant data structures.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use is_power_of_2() instead of hard coding it in the driver. While at it,
fix the meaningless error print.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_umem_get() uses gup_longterm() and relies on the lock to stabilze the
vma_list, so we cannot really get rid of mmap_sem altogether, but now that
the counter is atomic, we can get of some complexity that mmap_sem brings
with only pinned_vm.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
usnic_uiom_get_pages() uses gup_longterm() so we cannot really get rid of
mmap_sem altogether in the driver, but we can get rid of some complexity
that mmap_sem brings with only pinned_vm. We can get rid of the wq
altogether as we no longer need to defer work to unpin pages as the
counter is now atomic. We also share the lock.
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This driver already uses gup_fast() and thus we can just drop the mmap_sem
protection around the pinned_vm counter. Note that the window between when
hfi1_can_pin_pages() is called and the actual counter is incremented
remains the same as mmap_sem was _only_ used for when ->pinned_vm was
touched.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.det>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The driver uses mmap_sem for both pinned_vm accounting and
get_user_pages(). Because rdma drivers might want to use gup_longterm() in
the future we still need some sort of mmap_sem serialization (as opposed
to removing it entirely by using gup_fast()). Now that pinned_vm is atomic
the writer lock can therefore be converted to reader.
This also fixes a bug that __qib_get_user_pages was not taking into
account the current value of pinned_vm.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Taking a sleeping lock to _only_ increment a variable is quite the
overkill, and pretty much all users do this. Furthermore, some drivers
(ie: infiniband and scif) that need pinned semantics can go to quite
some trouble to actually delay via workqueue (un)accounting for pinned
pages when not possible to acquire it.
By making the counter atomic we no longer need to hold the mmap_sem and
can simply some code around it for pinned_vm users. The counter is 64-bit
such that we need not worry about overflows such as rdma user input
controlled from userspace.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ACK packets are generally associated with request completion and resource
release and therefore should be sent first. This patch optimizes the
send engine by using the following policies:
(1) QPs with RVT_S_ACK_PENDING bit set in qp->s_flags or qpriv->s_flags
should have their priority incremented;
(2) QPs with ACK or TID-ACK packet queued should have their priority
incremented;
(3) When a QP is queued to the wait list due to resource constraints, it
will be queued to the head if it has ACK packet to send;
(4) When selecting qps to run from the wait list, the one with the highest
priority and starve_cnt will be selected; each priority will be equivalent
to a fixed number of starve_cnt (16).
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch makes the following changes to the static trace:
1. Adds the decoding of TID RDMA WRITE packets in IB header trace;
2. Adds trace events for various stages of the TID RDMA WRITE
protocol. These events provide a fine-grained control for monitoring
and debugging the hfi1 driver in the filed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch enables TID RDMA WRITE protocol by converting a qualified
RDMA WRITE request into a TID RDMA WRITE request internally:
(1) The TID RDMA cability must be enabled;
(2) The request must start on a 4K page boundary;
(3) The request length must be a multiple of 4K and must be larger or
equal to 256K.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This locking mechanism is designed to provent vavious memory corruption
scenarios from occurring when requests are pipelined, especially when
RDMA WRITE requests are interleaved with TID RDMA READ requests:
1. READ-AFTER-READ;
2. READ-AFTER-WRITE;
3. WRITE-AFTER-READ;
4. WRITE-AFTER-WRITE.
When memory corruption is likely, a request will be held back until
previous requests have been completed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch integrates TID RDMA WRITE protocol into normal RDMA verbs
framework. The TID RDMA WRITE protocol is an end-to-end protocol
between the hfi1 drivers on two OPA nodes that converts a qualified
RDMA WRITE request into a TID RDMA WRITE request to avoid data copying
on the responder side.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The "Second Leg" of the TID RDMA WRITE protocol deals with
the transfer of data and ack packets, which are in the KDETH
PSN space, as opposed to the IB PSN space.
Therefore, the Second Leg could be considered as a separate
state machine. As such, it is handled by a different work
queue item which is scheduled along with the normal IB state
machine work item.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the TID packet builder for the responder side, which
contains the state machine to build TID RDMA ACK packet for either
TID RDMA WRITE DATA or TID RDMA RESYNC packets.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To improve performance, the TID RDMA WRITE protocol is designed to
own a second leg to send data and ack packets in the KDETH PSN space.
This patch adds the packet builder for the requester side, which
contains the state machine to build TID RDMA WRITE DATA and TID
RDMA RESYNC packet.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the logic to resend TID RDMA WRITE DATA packets.
The tracking indices will be reset properly so that the correct
TID entries will be used.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds a function to receive TID RDMA RESYNC packet on the
responder side. The QP's hardware flow will be updated and all
allocated software flows will be updated accordingly in order to
drop all stale packets.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds a function to build TID RDMA RESYNC packet, which is
sent by the requester to notify the responder that no TID RDMA ACK
packet has been received for a given KDETH PSN.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the TID RDMA retry timer to make sure that TID RDMA
WRITE DATA packets for a segment are received successfully by the
responder. This timer is generally armed when the last TID RDMA
WRITE DATA packet for a segment is sent out and stopped when all
TID RDMA DATA packets are acknowledged.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds a function to receive TID RDMA ACK packet, which could
be an acknowledge to either a TID RDMA WRITE DATA packet or an TID
RDMA RESYNC packet. For an ACK to TID RDMA WRITE DATA packet, the
request segments are completed appropriately. For an ACK to a TID
RDMA RESYNC packet, any pending segment flow information is updated
accordingly.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds a function to build TID RDMA ACJ packet, which is also
in the KDETH PSN space for packet ordering. This packet is used to
acknowledge the receiving of all the TID RDMA WRITE DATA packets
before the given KDETH PSN. Similar to RC ACK packets, TID RDMA ACK
packets could also be coalesced.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds a function to receive TID RDMA WRITE DATA packet,
which is in the KDETH PSN space in packet ordering. Due to the use
of header suppression, software is generally only notified when
the last data packet for a segment is received. This patch also
adds code to handle KDETH EFLAGS errors for ingress TID RDMA WRITE
DATA packets.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds a function to build TID RDMA WRITE DATA packet.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds a function to receive TID RDMA WRITE response.
The TID entries will be stored for encoding TID RDMA WRITE DATA
packet later.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the TID resource timer, which is used by the responder
to free any TID resources that are allocated for TID RDMA WRITE request
and not returned by the requester after a reasonable time.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the function to build TID RDMA WRITE response. The
main role of the TID RDMA WRITE RESP packet is to send TID entries
to the requester so that they can be used to encode TID RDMA WRITE
DATA packet.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the functions to receive TID RDMA WRITE request. The
request will be stored in the QP's s_ack_queue. This patch also adds
code to handle duplicate TID RDMA WRITE request and a function to
allocate TID resources for data receiving on the responder side.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The s_ack_queue is managed by two pointers into the ring:
r_head_ack_queue and s_tail_ack_queue. r_head_ack_queue is the index of
where the next received request is going to be placed and s_tail_ack_queue
is the entry of the request currently being processed. This works
perfectly fine for normal Verbs as the requests are processed one at a
time and the s_tail_ack_queue is not moved until the request that it
points to is fully completed.
In this fashion, s_tail_ack_queue constantly chases r_head_ack_queue and
the two pointers can easily be used to determine "queue full" and "queue
empty" conditions.
The detection of these two conditions are imported in determining when an
old entry can safely be overwritten with a new received request and the
resources associated with the old request be safely released.
When pipelined TID RDMA WRITE is introduced into this mix, things look
very different. r_head_ack_queue is still the point at which a newly
received request will be inserted, s_tail_ack_queue is still the
currently processed request. However, with pipelined TID RDMA WRITE
requests, s_tail_ack_queue moves to the next request once all TID RDMA
WRITE responses for that request have been sent. The rest of the protocol
for a particular request is managed by other pointers specific to TID RDMA
- r_tid_tail and r_tid_ack - which point to the entries for which the next
TID RDMA DATA packets are going to arrive and the request for which
the next TID RDMA ACK packets are to be generated, respectively.
What this means is that entries in the ring, which are "behind"
s_tail_ack_queue (entries which s_tail_ack_queue has gone past) are no
longer considered complete. This is where the problem is - a newly
received request could potentially overwrite a still active TID RDMA WRITE
request.
The reason why the TID RDMA pointers trail s_tail_ack_queue is that the
normal Verbs send engine uses s_tail_ack_queue as the pointer for the next
response. Since TID RDMA WRITE responses are processed by the normal Verbs
send engine, s_tail_ack_queue had to be moved to the next entry once all
TID RDMA WRITE response packets were sent to get the desired pipelining
between requests. Doing otherwise would mean that the normal Verbs send
engine would not be able to send the TID RDMA WRITE responses for the next
TID RDMA request until the current one is fully completed.
This patch introduces the s_acked_ack_queue index to point to the next
request to complete on the responder side. For requests other than TID
RDMA WRITE, s_acked_ack_queue should always be kept in sync with
s_tail_ack_queue. For TID RDMA WRITE request, it may fall behind
s_tail_ack_queue.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The TID RDMA WRITE protocol differs from normal IB RDMA WRITE
in that TID RDMA WRITE requests do require responses, not just
ACKs.
Therefore, TID RDMA WRITE requests need to be treated as RDMA
READ requests from the point of view of the QPs' s_ack_queue.
In other words, the QPs' need to allow for TID RDMA WRITE
requests to be stored in their s_ack_queue.
However, because the user does not know anything about the TID
RDMA capability and/or protocols, these extra entries in the
queue cannot be advertized to the user.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the functions to build TID RDMA WRITE request.
The work request opcode, packet opcode, and packet formats for TID
RDMA WRITE protocol are also defined in this patch.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch makes the following changes to the static trace:
1. Adds the decoding of TID RDMA READ packets in IB header trace;
2. Tracks qpriv->s_flags and iow_flags in qpsleepwakeup trace;
3. Adds a new event to track RC ACK receiving;
4. Adds trace events for various stages of the TID RDMA READ
protocol. These events provide a fine-grained control for monitoring
and debugging the hfi1 driver in the filed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch enables TID RDMA READ protocol by converting a qualified
RDMA READ request into a TID RDMA READ request internally:
(1) The TID RDMA capability must be enabled;
(2) The request must start on a 4K page boundary and all receiving
buffers must start on 4K page boundaries;
(3) The request length must be a multiple of 4K and must be larger or
equal to 256K. Each receiving buffer length must be a multiple of 4K.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This locking mechanism is designed to provent vavious memory corruption
scenarios from occurring when requests are pipelined, especially when
RDMA READ/WRITE requests are interleaved with TID RDMA READ/WRITE
requests:
1. READ-AFTER-READ;
2. READ-AFTER-WRITE;
3. WRITE-AFTER-READ;
When memory corruption is likely, a request will be held back until
previous requests have been completed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch integrates the TID RDMA READ protocol into the IB RC protocol.
This protocol is an end-to-end protocol between the hfi1 drivers on two
OPA nodes that converts a qualified RDMA READ request into a TID RDMA
READ request to avoid data copying on the requester side. The following
codes are added in this patch:
- Send the TID RDMA READ request;
- Complete the TID RDMA READ send request;
- Send the TID RDMA READ response;
- Complete the TID RDMA READ request;
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The RC retry timeout value is based on the estimated time for the
response packet to come back. However, for TID RDMA READ request, due
to the use of header suppression, the driver is normally not notified
for each incoming response packet until the last TID RDMA READ response
packet. Consequently, the retry timeout value should be extended to
cover the transaction time for the entire length of a segment (default
256K) instead of that for a single packet. This patch addresses the
issue by introducing new retry timer functions to account for multiple
packets and wrapper functions for backward compatibility.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds functions to retry TID RDMA READ request. Since TID RDMA
READ request could be retried from any segment boundary, it requires
a number of tracking fields in various structures and those fields
should be reset properly. The qp->s_num_rd_atomic field is reset before
retry and therefore should be incremented for each new or retried
RDMA READ or atomic request.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This commit adds the TID RDMA READ pointers to the receiving opcode
handlers. It also adds TID RDMA READ header sizes to header size table.
A function to print the RHF EFLAGS errors is created so that it can be
shared by both IB and TID RDMA receiving functions.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the functions to receive TID RDMA READ response. The TID
resource information in the KDETH packet header will direct the hardware
to deliver the packet payload to the user buffer automatically and the
software will handle the packet header for the last packet of a segment
as all other packet headers are suppressed by default. The TID entries
will be freed when all packets for a segment have been received. This
patch also adds the functions to handle KDETH eflag errors, including
flow sequence and generation errors, when a TID RDMA READ response
packet is received . The flow sequence error can be recovered by software
checking of the flow sequence and will disappear when the hardware flow
is programmed with a new generation number.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the function to build TID RDMA READ response packet.
The previously received TID resource information will be used to
build the KDETH packet, which will direct the delivery of packet payload
by hardware.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the functions to receive TID RDMA READ request. The TID
resource information will be stored and tracked. Duplicate request
will also be handled properly.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All TID RDMA packets are in KDETH packet format and therefore the
PbcInsertHcrc must be set properly before sending the packet to
hardware. Otherwise, the packets will be dropped by the receiver.
By default, HCRC is not inserted for 9B packets without KDETH, and
this patch adds that back for TID RDMA packets.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the helper functions to build the TID RDMA READ request
on the requester side. The key is to allocate TID resources (TID flow
and TID entries) and send the resource information to the responder side
along with the read request. Since the TID resources are limited, each
TID RDMA READ request has to be split into segments with a default
segment size of 256K. A software flow is allocated to track the data
transaction for each segment. The work request opcode, packet opcode, and
packet formats for TID RDMA READ protocol are also defined in this patch.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the static trace for the flow and TID management
functions to help debugging in the filed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the counter n_tidwait to count the number of times the
TID resource allocator has to wait for TID resources.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
TID entries are used by hfi1 hardware to receive data payload from
incoming packets directly into a user buffer and thus avoid data copying
by software. This patch implements the functions for TID allocation,
freeing, and programming TID RcvArray entries in hardware for kernel
clients. TID entries are managed via lists of TID groups similar to PSM.
Furthermore, to track TID resource allocation for each request, software
flows are also allocated and freed as needed. Since software flows
consume large amount of memory for tracking TID allocation and freeing,
it is generally desirable to allocate them dynamically in the send queue
and only for TID RDMA requests, but pre-allocate them for receive queue
because the send queue could have thousands of entries while the receive
queue has only a limited number of entries.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hfi1 hardware flow is a hardware flow-control mechanism for a KDETH
data packet that is received on a hfi1 port. It validates the packet by
checking both the generation and sequence. Each QP that uses the TID RDMA
mechanism will allocate a hardware flow from its receiving context for
any incoming KDETH data packets.
This patch implements:
(1) a function to allocate hardware flow
(2) a function to free hardware flow
(3) a function to initialize hardware flow generation for a receiving
context
(4) a wait mechanism if the hardware flow is not available
(4) a function to remove the qp from the wait queue for hardware flow
when the qp is reset or destroyed.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch moves some RC helper functions into a header file so that
they can be called from both RC and TID RDMA functions. In addition,
a common function for rewinding a request is created in rdmavt so that
it can be shared between qib and hfi1 driver.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Move the iwpm kdoc comments from the prototype declarations to above
the function bodies. There are no functional changes in this patch.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Netlink statistics exported by rdma-cm never had any working user space
component published to the mailing list or to any open source
project. Canvassing various proprietary users, and the original requester,
we find that there are no real users of this interface.
This patch simply removes all occurrences of RDMA CM netlink in favour of
modern nldev implementation, which provides the same information and
accompanied by widely used user space component.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Avoid that sparse reports the following for the mlx5 driver:
drivers/infiniband/hw/mlx5/qp.c:2671:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2671:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2671:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2679:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2679:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2679:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2680:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2680:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2680:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2684:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2684:34: left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2684:34: right side has type int
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: incorrect type in argument 1 (different base types)
drivers/infiniband/hw/mlx5/qp.c:2686:28: expected unsigned int [usertype] val
drivers/infiniband/hw/mlx5/qp.c:2686:28: got restricted __be32 [usertype]
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
This patch does not change any functionality.
Fixes: a60109dc9a ("IB/mlx5: Add support for extended atomic operations")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Change "unsoliticed" into "unsolicited".
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make sure that the next time a response is sent to the initiator that the
credit it had allocated for the aborted request gets freed.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 131e6abc67 ("target: Add TFO->abort_task for aborted task resources release") # v3.15
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of maintaining a list of free I/O contexts, use an sbitmap data
structure to track which I/O contexts are in use and which are free. This
makes the ib_srpt driver more consistent with other LIO drivers.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If submitting a TMF to the target core fails, send the "FUNCTION REJECTED"
response to the initiator.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If submitting an SRP IU to the target core fails, send the SCSI response
"BUSY" to the initiator instead of not sending any response.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Due to the patch that makes TMF handling synchronous the
write_pending_status() callback function is no longer called. Hence remove
it.
Acked-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Saurav Kashyap <saurav.kashyap@qlogic.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since .scsi_done() must only be called after scsi_queue_rq() has
finished, make sure that the SRP initiator driver does not call
.scsi_done() while scsi_queue_rq() is in progress. Although
invoking sg_reset -d while I/O is in progress works fine with kernel
v4.20 and before, that is not the case with kernel v5.0-rc1. This
patch avoids that the following crash is triggered with kernel
v5.0-rc1:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000138
CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10
Call Trace:
blk_mq_sched_dispatch_requests+0x2f7/0x300
__blk_mq_run_hw_queue+0xd6/0x180
blk_mq_run_work_fn+0x27/0x30
process_one_work+0x4f1/0xa20
worker_thread+0x67/0x5b0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
Cc: <stable@vger.kernel.org>
Fixes: 94a9174c63 ("IB/srp: reduce lock coverage of command completion")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A soft iwarp driver that uses the host TCP stack via a kernel mode socket
does not need port mapping. In fact, if the port map daemon, iwpmd, is
running, then iwpmd must not try and create/bind a socket to the actual
port for a soft iwarp connection, since the driver already has that socket
bound.
Yet if the soft iwarp driver wants to interoperate with hard iwarp devices
that -are- using port mapping, then the soft iwarp driver's mappings still
need to be maintained and advertised by the iwpm protocol.
This patch enhances the rdma driver<->iwcm interface to allow an iwarp
driver to specify that it does not want port mapping. The iwpm
kernel<->iwpmd interface is also enhanced to pass up this information on
map requests.
Care is taken to interoperate with the current iwpmd version (ABI version
3) and only use the new NL attributes if iwpmd supports ABI version 4.
The ABI version define has also been created in rdma_netlink.h so both
kernel and user code can share it. The iwcm and iwpmd negotiate the ABI
version to use with a new HELLO netlink message.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to add new IWPM_NL attributes, the enums for the IWPM commands
attributes are refactored such that a new attribute can be added without
breaking ABI version 3. Instead of sharing nl attribute enums for both
request and response messages, we create separate enums for each IWPM
message request and reply. This allows us to extend any given IWPM
message by adding new attributes for just that message. These new enums
are created, though, in a way to avoid breaking ABI version 3.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
So future additions to that struct get initialized by default.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging when sending doorbell
during reset. We can fix it by prohibiting doorbell during reset.
Fixes: 2d40788825 ("RDMA/hns: Add support for processing send wr and receive wr")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On hi08 chip, There is a possibility of chip hanging and some errors when
sending mailbox & doorbell during reset. We can fix it by prohibiting
mailbox and doorbell during reset and reset occurred to ensure that
hardware can work normally.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the reset process, the hns3 NIC driver notifies the RoCE driver to
perform reset related processing by calling the .reset_notify() interface
registered by the RoCE driver in hip08 SoC.
In the current version, if a reset occurs simultaneously during the
execution of rmmod or insmod ko, there may be Oops error as below:
Internal error: Oops: 86000007 [#1] PREEMPT SMP
Modules linked in: hns_roce(O) hns3(O) hclge(O) hnae3(O) [last unloaded: hns_roce_hw_v2]
CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G O 4.19.0-ge00d540 #1
Hardware name: Huawei Technologies Co., Ltd.
Workqueue: events hclge_reset_service_task [hclge]
pstate: 60c00009 (nZCv daif +PAN +UAO)
pc : 0xffff00000100b0b8
lr : 0xffff00000100aea0
sp : ffff000009afbab0
x29: ffff000009afbab0 x28: 0000000000000800
x27: 0000000000007ff0 x26: ffff80002f90c004
x25: 00000000000007ff x24: ffff000008f97000
x23: ffff80003efee0a8 x22: 0000000000001000
x21: ffff80002f917ff0 x20: ffff8000286ea070
x19: 0000000000000800 x18: 0000000000000400
x17: 00000000c4d3225d x16: 00000000000021b8
x15: 0000000000000400 x14: 0000000000000400
x13: 0000000000000000 x12: ffff80003fac6e30
x11: 0000800036303000 x10: 0000000000000001
x9 : 0000000000000000 x8 : ffff80003016d000
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000000
x3 : 0000000000000004 x2 : 00000000000007ff
x1 : 0000000000000000 x0 : 0000000000000000
Process kworker/0:1 (pid: 14, stack limit = 0x00000000af8f0ad9)
Call trace:
0xffff00000100b0b8
0xffff00000100b3a0
hns_roce_init+0x624/0xc88 [hns_roce]
0xffff000001002df8
0xffff000001006960
hclge_notify_roce_client+0x74/0xe0 [hclge]
hclge_reset_service_task+0xa58/0xbc0 [hclge]
process_one_work+0x1e4/0x458
worker_thread+0x40/0x450
kthread+0x12c/0x130
ret_from_fork+0x10/0x18
Code: bad PC value
In the reset process, we will release the resources firstly, and after the
hardware reset is completed, we will reapply resources and reconfigure the
hardware.
We can solve this problem by modifying both the NIC and the RoCE
driver. We can modify the concurrent processing in the NIC driver to avoid
calling the .reset_notify and .uninit_instance ops at the same time. And
we need to modify the RoCE driver to record the reset stage and the
driver's init/uninit state, and check the state in the .reset_notify,
.init_instance. and uninit_instance functions to avoid NULL pointer
operation.
Fixes: cb7a94c9c8 ("RDMA/hns: Add reset process for RoCE in hip08")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently a packet is marked for loopback only if the source and
destination addresses equals. This is not enough when multiple gids are
present in rxe device's gid table and the traffic is from one gid to
another. Fix it by marking the packet for loopback if the destination MAC
address is equal to the source MAC address.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move the function rxe_init_av() to rxe_av.c file and use it instead of
calling rxe_av_from_attr() and rxe_av_fill_ip_info(), also remove the
unused rxe_dev parameter from rxe_init_av().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes the following sparse warnings:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5822:5: warning:
symbol 'hns_roce_v2_query_srq' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:158:6: warning:
symbol 'hns_roce_srq_free' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:81:5: warning:
symbol 'hns_roce_srq_alloc' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxXYaEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkSQH/2yrfnviNPFYpZOR
QQdc71Bfhkd8m85SmWIsSebkxmi3hKFVj15sGbWXd6+0/VxjEEGvQCZpvVwJceke
LwDxtkKGg/74wAqJvlSAWxFNZ+Had4jDeoSoeQChddsBVXBBCxQx2v6ECg3o2x7W
k8Z8t4+3RijDf8fYXY9ETyO2zW8R/wgT+dnl+DPgUH7u4dxh7FzAUfc4bgZIDg+i
FzBQfbTJuz4BU7uRZ9IJiwhWKv0Iyi2DR3BY8Z1pqEpRaUMJMrCs2WGytHbTgt9e
0EtO1airbVneU4eumU/ZaF9cyEbah9HousEPnP7J09WG4s/Odxc4zE+uK1QqS2im
5Xv88is=
=dVd1
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc5' into rdma.git for-next
Linux 5.0-rc5
Needed to merge the include/uapi changes so we have an up to date
single-tree for these files. Patches already posted are also expected to
need this for dependencies.
Keeping single line wrapper functions is not useful. Hence remove the
ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Query all per transport caps for XRC and set the appropriate bits in the
per transport field of the advertised struct.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ODP support in SRQ is per transport capability. Based on device
capabilities set this flag in device structure for future queries.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add changes to the WQE page-fault handler to
1. Identify that the event is for a SRQ WQE
2. Pass SRQ object instead of a QP to the function that reads the WQE
3. Parse the SRQ WQE with respect to its structure
The rest is handled as for regular RQ WQE.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reading a WQE from SRQ is almost identical to reading from regular RQ.
The differences are the size of the queue, the size of a WQE and buffer
location.
Make necessary changes to mlx5_ib_read_user_wqe() to let it read a WQE
from a SRQ or RQ by caller choice.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Skip XRC segment in the beginning of a send WQE and fetch ODP XRC
capabilities when QP type is IB_QPT_XRC_INI. The rest of the handling is
the same as in RC QP.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the function mlx5_ib_mr_responder_pfault_handler()
1. The parameter wqe is used as read-only so there is no need to pass it
by reference.
2. Remove the unused argument pfault from list of arguments.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When handling an ODP event for a receive WQE in SRQ the target QP is
unknown. Therefore, it is wrong to ask if QP has a SRQ in the page-fault
handler.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose XRC ODP capabilities as part of the extended device capabilities.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
QP and SRQ objects are stored in different containers so the action to get
and lock a common resource during ODP event needs to address that.
While here get rid of 'refcount' and 'free' fields in mlx5_core_srq struct
and use the fields with same semantics in common structure.
Fixes: 032080ab43 ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_v2_qp_flow_control_init':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4384:33: warning:
variable 'rst' set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the static trace to the OPFN code and moves tid related
static trace code into a new header file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN parameter negotiation allows a pair of connected RC QPs to exchange
a set of parameters in succession. This negotiation does not commence
till the first ULP request. Because OPFN operations are operations
private to the driver, they do not generate user completions or put the
QP into error when they run out of retries. This patch integrates the
OPFN protocol into the transactions of an RC QP.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The OPFN protocol uses the COMPARE_SWAP request to exchange data
between the requester and the responder and therefore needs to
be stored in the QP's s_ack_queue when the request is received
on the responder side. However, because the user does not know
anything about the OPFN protocol, this extra entry in the
queue cannot be advertised to the user. This patch adds an extra
entry in a QP's s_ack_queue.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN allows a pair of connected RC QPs to exchange a set of parameters
in succession. The parameter exchange itself is done using the IB compare
and swap request with a special virtual address. The request is triggered
using a reserved IB work request opcode. This patch implements the OPFN
interface to initialize, start, process, and reset the OPFN request.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the OPFN helper functions to initialize, encode, decode,
and reset OPFN parameters for the TID RDMA feature.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN (Omni Path Feature Negotiation) support discovery allows a RC QP to
announce that it supports OPFN and also discover if OPFN is supported by
the peer QP. OPFN parameter negotiation is skipped unless OPFN support is
first discovered. OPFN support is announced by claiming what was
the reserved bit in dword 1 of OmniPath modified base transport header
in requests and responses.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
As preparation to hide rdma_restrack_root, refactor the code to use the
ops structure instead of a special callback which is hidden in
rdma_restrack_root.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since we already know if we are user/kernel before calling restrack_add,
move type dependent code into the callers to make the flow more readable.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the current implementation, we have one restrack root per-device and
all users are simply providing it directly. Let's simplify the interface
and have callers provide the ib_device and internally access the
restrack_root.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The .doit callbacks don't have a netlink_callback to check capabilities so
in order to use the same fill_res_func for both .dump and .doit, we need
to do the capability check outside of those functions.
For .doit callbacks, it is possible to check CAP_NET_ADMIN directly on the
received sk_buff.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The PID namespace is going to be used in the .doit callback, so generalize
its implementation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to manually write same callbacks, automatically generate
them using C-macro language.
This macro is going to be extended to generate doit callbacks too, so use
general name for this macro.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When a given netdev of the GID entry is macvlan netdevice, and if the
lower netdevice is vlan device, GID entry for macvlan based IP address
needs to inherit the vlan of the lower netdevice.
Therefore, attempt to find out if the lower device exist and if so, if
it is vlan device and setup the vlan tag correctly.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lack of mandatory verbs no longer fail device registration, the device
will be marked as a non-kverbs provider.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Tested-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Drivers that do not provide kernel verbs support should not be used by ib
kernel clients at all.
In case a device does not implement all mandatory verbs for kverbs usage
mark it as a non kverbs provider and prevent its usage for all clients
except for uverbs.
The device is marked as a non kverbs provider using the 'kverbs_provider'
flag which should only be set by the core code. The clients can choose
whether kverbs are requested for its usage using the 'no_kverbs_req' flag
which is currently set for uverbs only.
This patch allows drivers to remove mandatory verbs stubs and simply set
the callbacks to NULL. The IB device will be registered as a non-kverbs
provider. Note that verbs that are required for the device registration
process must be implemented.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers to ib_alloc_device() provide a larger size than struct
ib_device and rely on the fact that struct ib_device is embedded in their
driver specific structure as the first member.
Provide a safer variant of ib_alloc_device() that checks and enforces this
approach to make sure the drivers are using it right.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove 'del_mkey' variable that is set but not used.
Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function mlx5_ib_stage_odp_cleanup() is only used in main.c
Fixes: d5d284b829 ("{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The default behavior of the SCSI core is to set the block layer request
queue parameter max_segment_size to 64 KB. That means that elements of
scatterlists are limited to 64 KB. Since RDMA adapters support larger
sizes, increase max_segment_size for the SRP initiator.
Notes:
- The SCSI max_segment_size parameter was introduced in kernel v5.0. See
also commit 50c2e9107f ("scsi: introduce a max_segment_size
host_template parameters").
- Some other block drivers already set max_segment_size to UINT_MAX,
e.g. nbd and rbd.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Several locations for manipulating sges use an open coded sequence
that is covered by helper functions.
Use the appropriate helper functions.
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sge sizing is done in several places using an open coded method.
This can cause maintenance issues. The open coded method is
encapsulated in a helper routine. The helper was introduced with
commit:
1198fcea8a ("IB/hfi1, rdmavt: Move SGE state helper routines into
rdmavt")
Update all call sites that have the open coded path with the helper
routine.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The function ipoib_intercept_dev_id_attr() is only used in ipoib_main.c
Fixes: f6350da41d ("IB/ipoib: Log sysfs 'dev_id' accesses from userspace")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update the driver to use the new device capability to report 64-bit UAR
PFNs.
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Yishai Hadas says:
Enable DEVX asynchronous query commands
This series enables querying a DEVX object in an asynchronous mode.
The userspace application won't block when calling the firmware and it will be
able to get the response back once that it will be ready.
To enable the above functionality:
- DEVX asynchronous command completion FD object was introduced.
- The applicable file operations were implemented to enable using it by
the user application.
- Query asynchronous method was added to the DEVX object, it will call the
firmware asynchronously and manages the response on the given input FD.
- Hot unplug support was added for the FD to work properly upon
unbind/disassociate.
- mlx5 core fence for asynchronous commands was implemented and used to
prevent racing upon unbind/disassociate.
This branch is based on mlx5-next & v5.0-rc2 due to dependencies, from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
* branch 'devx-async':
IB/mlx5: Implement DEVX hot unplug for async command FD
IB/mlx5: Implement the file ops of DEVX async command FD
IB/mlx5: Introduce async DEVX obj query API
IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement DEVX hot unplug for the async command FD.
This is done by managing a list of the inflight commands and wait until
all launched work is completed as part of
devx_hot_unplug_async_cmd_event_file.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement the file ops of the DEVX async command FD, this enables using
the FD for reading the events and manage other options on the FD.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce async DEVX obj query API to get the command response back to
user space once it's ready without blocking when calling the firmware.
The event's data includes a header with some meta data then the firmware
output command data.
The header includes:
- The input 'wr_id' to let application recognizing the response.
The input FD attribute is used to have the event data ready on.
Downstream patches from this series will implement the file ops to let
application read it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD and its initial implementation.
This object is from type class FD and will be used to read DEVX async
commands completion.
The core layer should allow the driver to set object from type FD in a
safe mode, this option was added with a matching comment in place.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].
To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.
Having whitespaces after -I does not matter since commit 48f6e3cf5b
("kbuild: do not drop -I without parameter").
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The included headers are located in include/target/. I was able to
build these drivers without the extra header search paths.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The following BUG was reported by kasan:
BUG: KASAN: use-after-free in ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
Read of size 80 at addr ffff88034c30bcd0 by task kworker/u16:1/24020
Workqueue: ipoib_wq ipoib_cm_tx_start [ib_ipoib]
Call Trace:
dump_stack+0x9a/0xeb
print_address_description+0xe3/0x2e0
kasan_report+0x18a/0x2e0
? ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
memcpy+0x1f/0x50
ipoib_cm_tx_start+0x430/0x1390 [ib_ipoib]
? kvm_clock_read+0x1f/0x30
? ipoib_cm_skb_reap+0x610/0x610 [ib_ipoib]
? __lock_is_held+0xc2/0x170
? process_one_work+0x880/0x1960
? process_one_work+0x912/0x1960
process_one_work+0x912/0x1960
? wq_pool_ids_show+0x310/0x310
? lock_acquire+0x145/0x440
worker_thread+0x87/0xbb0
? process_one_work+0x1960/0x1960
kthread+0x314/0x3d0
? kthread_create_worker_on_cpu+0xc0/0xc0
ret_from_fork+0x3a/0x50
Allocated by task 0:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0x168/0x3e0
path_rec_create+0xa2/0x1f0 [ib_ipoib]
ipoib_start_xmit+0xa98/0x19e0 [ib_ipoib]
dev_hard_start_xmit+0x159/0x8d0
sch_direct_xmit+0x226/0xb40
__dev_queue_xmit+0x1d63/0x2950
neigh_update+0x889/0x1770
arp_process+0xc47/0x21f0
arp_rcv+0x462/0x760
__netif_receive_skb_core+0x1546/0x2da0
netif_receive_skb_internal+0xf2/0x590
napi_gro_receive+0x28e/0x390
ipoib_ib_handle_rx_wc_rss+0x873/0x1b60 [ib_ipoib]
ipoib_rx_poll_rss+0x17d/0x320 [ib_ipoib]
net_rx_action+0x427/0xe30
__do_softirq+0x28e/0xc42
Freed by task 26680:
__kasan_slab_free+0x11d/0x160
kfree+0xf5/0x360
ipoib_flush_paths+0x532/0x9d0 [ib_ipoib]
ipoib_set_mode_rss+0x1ad/0x560 [ib_ipoib]
set_mode+0xc8/0x150 [ib_ipoib]
kernfs_fop_write+0x279/0x440
__vfs_write+0xd8/0x5c0
vfs_write+0x15e/0x470
ksys_write+0xb8/0x180
do_syscall_64+0x9b/0x420
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff88034c30bcc8
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 8 bytes inside of
512-byte region [ffff88034c30bcc8, ffff88034c30bec8)
The buggy address belongs to the page:
The following race between change mode and xmit flow is the reason for
this use-after-free:
Change mode Send packet 1 to GID XX Send packet 2 to GID XX
| | |
start | |
| | |
| | |
| Create new path for GID XX |
| and update neigh path |
| | |
| | |
| | |
flush_paths | |
| |
queue_work(cm.start_task) |
| Path for GID XX not found
| create new path
|
|
start_task runs with old
released path
There is no locking to protect the lifetime of the path through the
ipoib_cm_tx struct, so delete it entirely and always use the newly looked
up path under the priv->lock.
Fixes: 546481c281 ("IB/ipoib: Fix memory corruption in ipoib cm mode connect flow")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The intention of the flow_is_supported was to disable the entire tree and
methods that allow raw flow creation, but the grammar syntax has this
disable the entire UVERBS_FLOW object. Since the method requires a
MLX5_IB_OBJECT_FLOW_MATCHER there is no need to do anything, as it is
automatically disabled when matchers are disabled.
This restores the ability to create flow steering rules on representors
via regular verbs.
Fixes: a1462351b5 ("RDMA/mlx5: Fail early if user tries to create flows on IB representors")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The async_file might be freed before the disassociation has been ended,
causing qp shutdown to use after free on it.
Since uverbs_destroy_ufile_hw is not a fence, it returns if a
disassociation is ongoing in another thread. It has to be written this way
to avoid deadlock. However this means that the ufile FD close cannot
destroy anything that may still be used by an active kref, such as the the
async_file.
To fix that move the kref_put() to be in ib_uverbs_release_file().
BUG: unable to handle kernel paging request at ffffffffba682787
PGD bc80e067 P4D bc80e067 PUD bc80f063 PMD 1313df163 PTE 80000000bc682061
Oops: 0003 [#1] SMP PTI
CPU: 1 PID: 32410 Comm: bash Tainted: G OE 4.20.0-rc6+ #3
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__pv_queued_spin_lock_slowpath+0x1b3/0x2a0
Code: 98 83 e2 60 49 89 df 48 8b 04 c5 80 18 72 ba 48 8d
ba 80 32 02 00 ba 00 80 00 00 4c 8d 65 14 41 bd 01 00 00 00 48 01 c7 85
d2 <48> 89 2f 48 89 fb 74 14 8b 45 08 85 c0 75 42 84 d2 74 6b f3 90 83
RSP: 0018:ffffc1bbc064fb58 EFLAGS: 00010006
RAX: ffffffffba65f4e7 RBX: ffff9f209c656c00 RCX: 0000000000000001
RDX: 0000000000008000 RSI: 0000000000000000 RDI: ffffffffba682787
RBP: ffff9f217bb23280 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9f209d2c7800 R11: ffffffffffffffe8 R12: ffff9f217bb23294
R13: 0000000000000001 R14: 0000000000000000 R15: ffff9f209c656c00
FS: 00007fac55aad740(0000) GS:ffff9f217bb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffba682787 CR3: 000000012f8e0000 CR4: 00000000000006e0
Call Trace:
_raw_spin_lock_irq+0x27/0x30
ib_uverbs_release_uevent+0x1e/0xa0 [ib_uverbs]
uverbs_free_qp+0x7e/0x90 [ib_uverbs]
destroy_hw_idr_uobject+0x1c/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x2e/0x180 [ib_uverbs]
__uverbs_cleanup_ufile+0x73/0x90 [ib_uverbs]
uverbs_destroy_ufile_hw+0x5d/0x120 [ib_uverbs]
ib_uverbs_remove_one+0xea/0x240 [ib_uverbs]
ib_unregister_device+0xfb/0x200 [ib_core]
mlx5_ib_remove+0x51/0xe0 [mlx5_ib]
mlx5_remove_device+0xc1/0xd0 [mlx5_core]
mlx5_unregister_device+0x3d/0xb0 [mlx5_core]
remove_one+0x2a/0x90 [mlx5_core]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x16d/0x240
unbind_store+0xb2/0x100
kernfs_fop_write+0x102/0x180
__vfs_write+0x36/0x1a0
? __alloc_fd+0xa9/0x170
? set_close_on_exec+0x49/0x70
vfs_write+0xad/0x1a0
ksys_write+0x52/0xc0
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fac551aac60
Cc: <stable@vger.kernel.org> # 4.2
Fixes: 036b106357 ("IB/uverbs: Enable device removal when there are active user space applications")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hns_roce_ib_create_srq_resp is used to interact with the user for
data, this was open coded to use a u32 directly, instead use a properly
sized structure.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The open-coded variant missed destroy of SELinux created QP, reuse already
existing ib_detroy_qp() call and use this opportunity to clean
ib_create_qp() from double prints and unclear exit paths.
Reported-by: Parav Pandit <parav@mellanox.com>
Fixes: d291f1a652 ("IB/core: Enforce PKey security on QPs")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Similar to the core change commit 5f1d43de54 ("IB/core: disable memory
registration of filesystem-dax vmas")
PSM should be prevented from using filesystem DAX pages.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds qpc timer and cqc timer allocation support for hardware
timeout retransmission in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds SCC context clear support for DCQCN in kernel space
driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds SCC context allocation and initialization support for
DCQCN in kernel space driver.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Shiraz, Saleem