Commit Graph

347 Commits

Author SHA1 Message Date
Zhu Yi 810dabd466 [PATCH] ipw2200: Bluetooth coexistence support
I've added a new module param "bt_coexist" which defaults to OFF.

This does not seem to fix the firmware restarts, but it does do "the
right thing" and disables something that we were enabling by default:
signaling the Bluetooth h/w which channel we're on (whether or not the
BT h/w was out there).

Signed-off-by: Ben M Cahill <ben.m.cahill@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:33 -05:00
Zhu Yi 3e234b4e57 [PATCH] ipw2200: Add LEAP authentication algorithm support
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:33 -05:00
Zhu Yi f516dbcd7d [PATCH] ipw2200: Mask out the WEP_KEY command dump from debug log for security reason
Signed-off-by: Nick Kralevich <nick.ipw2200@kralevich.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:32 -05:00
Zhu Yi c8fe667908 [PATCH] ipw2200: Fix indirect SRAM/register 8/16-bit write routines
The indirect SRAM/register 8/16-bit write routines are broken for
non-dword-aligned destination addresses.

Fortunately, these routines are, so far, not used for non-dword-aligned
destinations, but here's a patch that fixes them, anyway.

The attached patch also adds comments for all direct/indirect I/O routine
variations.

Signed-off-by: Ben M Cahill <ben.m.cahill@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:32 -05:00
Zhu Yi 71aa122d8a [PATCH] increase ipw2100 driver version to git-1.1.4
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:32 -05:00
Zhu Yi 8ed55a482e [PATCH] ipw2100: remove white space and better format the code
Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:32 -05:00
Zhu Yi be6b3b15b5 [PATCH] ipw2100: Add generic geo information
This patch fixes a BUG_ON for the latest ieee80211 change.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:32 -05:00
Zhu Yi 3173ca0b76 [PATCH] ipw2100: Make iwconfig txpower setting consistent with user input
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:31 -05:00
Zhu Yi cbbdd03fad [PATCH] ipw2100: Add LEAP authentication algorithm support
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:31 -05:00
Adrian Bunk a73e22b286 [PATCH] drivers/net/wireless/ipw2200: possible cleanups
This patch contains the following possible cleanups:
- make needlessly global functions static
- "extern inline" -> "static inline"
- #if 0 the unused global function ipw_led_activity_on()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:31 -05:00
Adrian Bunk 3c398b8612 [PATCH] drivers/net/wireless/ipw2100.c: make ipw2100_wpa_assoc_frame() static
This patch makes the needlessly global ipw2100_wpa_assoc_frame() static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:31 -05:00
Adrian Bunk a39d3e796c [PATCH] AIRO{,_CS} <-> CRYPTO fixes
CRYPTO is a helper variable, and to make it easier for users, it should
therefore select'ed and not be listed in the dependencies.

drivers/net/wireless/airo.c requires CONFIG_CRYPTO for compilations.

Therefore, AIRO_CS also has to CRYPTO.

Additionally, this patch removes the #ifdef's for the non-compiling
CRYPTO=n case from drivers/net/wireless/airo.c.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:30 -05:00
Adrian Bunk d86b5e0e6b [PATCH] net/: fix the WIRELESS_EXT abuse
This patch contains the following changes:
- add a CONFIG_WIRELESS_EXT select'ed by NET_RADIO for conditional
  code
- remove the now no longer required #ifdef CONFIG_NET_RADIO from some
  #include's

Based on a patch by Jean Tourrilhes <jt@hpl.hp.com>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:30 -05:00
Adrian Bunk ae7ec20582 [PATCH] PCMCIA=m, HOSTAP_CS=y is not a legal configuration
CONFIG_PCMCIA=m, CONFIG_HOSTAP_CS=y doesn't compile.

Reported by "Gabriel C." <crazy@pimpmylinux.org>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 17:41:36 -05:00
Zhu Yi 489f4458cd [PATCH] ipw2200: Fix a variable referenced after kfree() bug
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 17:41:35 -05:00
Zhu Yi 17ed081dee [PATCH] ipw2200: Fix sw_reset doesn't clear the static essid problem
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 17:41:35 -05:00
Zhu Yi f73cb83f1a [PATCH] ipw2200: Fix "iwspy ethx off" causes kernel panic
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 17:41:35 -05:00
Zhu Yi b6e4da7234 [PATCH] ipw2100: Fix setting txpower failed problem
The ipw2100 driver misunderstood the parameter of txpower.
Tx Power off means turn off the radio, but the driver interpret it as
"can't set txpower". So when getting the txpower, it sets disabled=1 to
the iwconifg tool in managed mode. And the tool will display "Tx Power off"
when disabled=1.

Now, in managed mode, iwconfig will not show "TX Power" if the radio is not
switched off. It will only display "Tx Power off" only if the radio is killed.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 17:41:35 -05:00
Zhu Yi 3c5eca542d [PATCH] ipw2100: Fix a gcc compile warning
drivers/net/wireless/ipw2100.c:2236: warning: `ipw2100_match_buf' defined
but not used

Cc: Yi Zhu <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 17:41:35 -05:00
Valdis.Kletnieks@vt.edu 4f95af5bb5 [PATCH] orinoco_cs: tweak Vcc debugging messages
The current orinoco_cs.c can issue the exact same error message for
2 different tests that can fail.  Alter them so we can tell which
one of the two failed.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-27 16:49:58 -05:00
Javier Achirica 2610c73302 airo: Off-by-one channel fix 2006-01-17 08:01:01 -05:00
Adrian Bunk 5fad5a2e1f [PATCH] hostap: don't #include C files in hostap_main.c
This patch contains an attempt to properly build hostap.o without
#include'ing C files.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-16 16:51:54 -05:00
Adrian Bunk 8aec938389 [PATCH] ipw2100: remove code for WIRELESS_EXT < 18
WIRELESS_EXT < 18 will never be true in the kernel.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-16 16:51:54 -05:00
Dan Williams d6a13a24b7 [PATCH] drivers/net/wireless: correct reported ssid lengths
ESSIDs can technically include NULL characters.  Drivers should not be
adjusting the length of the ESSID before reporting it in their
SIOCGIWESSID handlers.  Breaks stuff like wpa_supplicant.  Note that ipw
drivers, which seem to currently be the "most correct", don't have this
problem.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-16 16:51:53 -05:00
Pavel Roskin a485cde662 [PATCH] hostap: allow flashing firmware
Host AP driver has code to support writing firmware to non-volatile
memory, a.k.a. flash.  This code has been extensively tested when Host
AP was a standalone driver.

Add a configuration option to the kernel to allow enabling this
functionality.  Improve the description of the RAM download option.
Mention cards that require it.  Remove obsolete scary comment.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-16 16:51:53 -05:00
Olaf Kirch d834a41c96 [PATCH] ipw2200: do not sleep in ipw_request_direct_scan
Drivers should not sleep for very long inside an ioctl -
so return EAGAIN and let wpa_supplicant handle the problem.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-16 16:51:53 -05:00
Graham Gower caa06b619f [PATCH] prism54/islpci_eth.c: dev_kfree_skb used with interrupts disabled
dev_kfree_skb should not be used with interrupts disabled.  Change to
use dev_kfree_skb_irq instead.

Signed-off-by: Graham Gower <graham.gower@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-16 16:51:53 -05:00
Linus Torvalds 3f02d072d4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial 2006-01-15 16:43:29 -08:00
Arjan van de Ven 858119e159 [PATCH] Unlinline a bunch of other functions
Remove the "inline" keyword from a bunch of big functions in the kernel with
the goal of shrinking it by 30kb to 40kb

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:06 -08:00
Adrian Bunk a8e82ef97a drivers/net/{,wireless/}Kconfig: remove dead URL
shadow.cabi.net does no longer exist.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-15 01:58:57 +01:00
Alex Shepard 9c782e3b20 Spelling fix in IPW2100 and IPW2200 Kconfig entries
s/remvoed/removed/

Signed-off-by: Alex Shepard <ashepard@u.washington.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-15 01:57:00 +01:00
Dan Williams 9a6301c114 [PATCH] wireless/atmel: add IWENCODEEXT, IWAUTH, and association event support
This patch allows the Atmel driver to work correctly with wpa_supplicant
and other programs that require some conformance with WEXT-18.  It
should not affect current behavior of the driver.  The patch does four
things:

1) Implements SIOCSIWENCODEEXT, SIOCGIWENCODEEXT, SIOCSIWAUTH, and
SIOCGIWAUTH calls for unencrypted and WEP operation

2) Accepts zero-filled addresses for SIOCSIWAP, which are legal and
should turn off any previous forced WAP address

3) Sends association and de-association events to userspace at most of
the appropriate times

4) Fixes erroneous order of CIPHER_SUITE_WEP_* arguments in one location
which are actually unused anyway

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-12 16:34:24 -05:00
dann frazier 9ad8b9d152 [PATCH] CONFIG_AIRO needs CONFIG_CRYPTO
airo.c currently has MICSUPPORT enabled, which requires CONFIG_CRYPTO.  A
user reported a build failure which is due to the lack of a Kconfig
dependency.  See http://bugs.debian.org/344205.

This patch makes Kconfig enforce this dependency.

Signed-off-by: dann frazier <dannf@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-12 16:31:51 -05:00
Alan Cox 33f0f88f1c [PATCH] TTY layer buffering revamp
The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.

This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.

When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.

For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).

Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.

The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.

I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.

Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real.  That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.

Description:

tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification].  It
does now also return the number of chars inserted

There are also

tty_buffer_request_room(tty, len)

which asks for a buffer block of the length requested and returns the space
found.  This improves efficiency with hardware that knows how much to
transfer.

and tty_insert_flip_string_flags(tty, str, flags, len)

to insert a string of characters and flags

For a smart interface the usual code is

    len = tty_request_buffer_room(tty, amount_hardware_says);
    tty_insert_flip_string(tty, buffer_from_card, len);

More description!

At the moment tty buffers are attached directly to the tty.  This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)

I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers.  This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.

So far so good.  Lots of drivers reference tty->flip.*.  Several of them also
call directly and unsafely into function pointers it provides.  This will all
break.  Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.

At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say

 int tty_buffer_request_room(tty, size)

Try and ensure at least size bytes are available, returns actual room (may be
zero).  At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative.  (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space.  The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.

 int tty_insert_flip_char(tty, ch, flag)

As before insert a character if there is room.  Now returns 1 for success, 0
for failure.

 int tty_insert_flip_string(tty, str, len)

Insert a block of non error characters.  Returns the number inserted.

 int tty_prepare_flip_string(tty, strptr, len)

Adjust the buffer to allow len characters to be added.  Returns a buffer
pointer in strptr and the length available.  This allows for hardware that
needs to use functions like insl or mencpy_fromio.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:59 -08:00
Dan Williams 166c3436d6 [patch] ipw2100: support WEXT-18 enc_capa v3
This patch allows ipw2100 driver to advertise the WPA-related encryption
options that it does really support.  It's necessary to work correctly
with NetworkManager and other programs that actually check driver & card
capabilities.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 11:04:31 -05:00
Dominik Brodowski f8cfa618dc [PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.

With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:

        int (*probe)            (struct pcmcia_device *dev);
        void (*remove)          (struct pcmcia_device *dev);

        int (*suspend)          (struct pcmcia_device *dev);
        int (*resume)           (struct pcmcia_device *dev);

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06 00:03:24 +01:00
Dominik Brodowski b463581154 [PATCH] pcmcia: remove dev_list from drivers
The linked list of devices managed by each PCMCIA driver is, in very most
cases, unused. Therefore, remove it from many drivers.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06 00:03:20 +01:00
Dominik Brodowski cc3b4866be [PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function.
Old functionality is preserved, for the moment.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06 00:03:10 +01:00
Dominik Brodowski 98e4c28b7e [PATCH] pcmcia: new suspend core
Move the suspend and resume methods out of the event handler, and into
special functions. Also use these functions for pre- and post-reset, as
almost all drivers already do, and the remaining ones can easily be
converted.

Bugfix to include/pcmcia/ds.c
Signed-off-by: Andrew Morton <akpm@osdl.org>

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05 23:59:02 +01:00
Linus Torvalds d779188d2b Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2006-01-04 16:31:56 -08:00
Stephen Hemminger 3c19065a1e [IEEE80211] ipw2200: Simplify multicast checks.
From: Stephen Hemminger <shemminger@osdl.org>

is_multicast_ether_addr() accepts broadcast too, so the
is_broadcast_ether_addr() calls are redundant.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 15:27:38 -08:00
Jeff Garzik ac67c62473 Merge branch 'master' 2006-01-03 10:49:18 -05:00
Pavel Roskin d495657200 [PATCH] orinoco_nortel: Add Symbol LA-4123 ID
Add ID for Symbol LA-4123.  Reported by Tomas Novak <tap@post.cz>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 10:05:51 -05:00
Pavel Roskin c8cb00f6ac [PATCH] orinoco_nortel: Fix incorrect PCI resource use
orinoco_nortel was broken during conversion to iomem API.  Wrong PCI BAR
is used for chipset registers.  Reported by Tomas Novak <tap@post.cz>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24 10:05:50 -05:00
Brice Goglin 0f52bf9058 [PATCH] Duplicate IPW_DEBUG option for ipw2100 and 2200
There are currently two IPW_DEBUG options in drivers/net/wireless/Kconfig
(one for ipw2100 and one for ipw2200).  The attached patch splits it into
IPW2100_DEBUG and IPW2200_DEBUG.

Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Cc: "James P. Ketrenos" <ipw2100-admin@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 04:51:34 -05:00
Takis c75f4742e2 [PATCH] ipw2200: kzalloc conversion and Kconfig dependency fix
- Use kzalloc for IPW2200
- Fix config dependency for IPW2200

Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Yi Zhu <yi.zhu@intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 04:51:34 -05:00
Jeff Garzik 62d65a8062 Merge branch 'upstream-fixes' 2005-12-01 04:51:26 -05:00
Dan Streetman f89b232173 [PATCH] airo.c: add support for IW_ENCODE_TEMP (i.e. xsupplicant)
Hello Jeff,

this patch changes causes the airo driver to not reset the card when a
temporary WEP key is set, when the IW_ENCODE_TEMP flag is used.  This is
needed for xsupplicant as 802.1x, LEAP, etc. change WEP keys frequently
after authentication and resetting the card causes infinite
reauthentication.

Javier and Jean agree with the patch, Javier suggested I send this to
you, can you apply this?

Thanks.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:40:34 -05:00
Matthieu CASTET 1d97f38448 [wireless airo] reset card in init
without this patch after an rmmod, modprobe the card won't work anymore
until the next reboot.

This patch seem safe to apply for all cards as the bsd driver already do
that.

I had to add a timeout because strange things happen (issuecommand will
fail) if the card is already reseted (after a reboot).

PS : it seems there are missing reset when leaving monitor mode...

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
2005-12-01 02:35:26 -05:00
Pavel Roskin c08ad1e304 [PATCH] orinoco: fix setting power management parameters
Power management parameters could not be set by iwconfig due to
incorrect error handling.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:28:56 -05:00