Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module to support i.MX8M
series SoCs' power key.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch selects CONFIG_IMX_SCU_SOC by default to support
i.MX system controller unit SoC info driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For imx8m we need a separate small driver to read "speed grading"
information from fuses and determine which OPPs are supported.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable imx-ocotp nvmem driver for fuse access on imx8m family.
The fuse block stores various system information which will be accessed
by client device drivers, e.g. cpufreq driver needs to access fuse for
CPU speed grading setting. So this nvmem driver gets enabled as
built-in.
Tested on imx8mm-evk.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This enables the INA3221 power monitoring driver that is used on many of
the Jetson boards as well as Tegra194 PCIe support.
-----BEGIN PGP SIGNATURE-----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=NJQ7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.3-rc1
This enables the INA3221 power monitoring driver that is used on many of
the Jetson boards as well as Tegra194 PCIe support.
* tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Add Tegra194 PCIe driver
arm64: defconfig: Add HWMON INA3221 support
Signed-off-by: Olof Johansson <olof@lixom.net>
W dniu 19.06.2019 o 16:21, Olof Johansson pisze:
> On Mon, Jun 17, 2019 at 06:04:09PM +0200, Marcin Juszkiewicz wrote:
>> Follow x86-64 defconfig on enabling basic LVM support.
>>
>> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
>
> Do you need this to be =y? If you use LVM, you usually boot with a ramdisk that
> will hold modules.
Right. Forgot to change.
From 63003d0047062949a1231f67e1efdcb96b54323a Mon Sep 17 00:00:00 2001
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Date: Mon, 27 May 2019 20:14:34 +0200
Subject: [PATCH 1/3] arm64 defconfig: enable LVM support
Follow x86-64 defconfig on enabling basic LVM support.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Mellanox cards are present in several AArch64 servers.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of arm64 boards can now use the Lima driver, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With the goal of making it easier for CI services such as KernelCI to
run tests for it.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Olof Johansson <olof@lixom.net>
Enables the FSL EDMA driver by default. This also works around an issue
that imx-i2c driver keeps deferring the probe because of the DMA is not
ready. And currently the DMA engine framework can not correctly tell
if the DMA channels will truly become available later (it will never be
available if the DMA driver is not enabled).
This will cause indefinite messages like below:
[ 3.335829] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
[ 3.344455] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm)
[ 3.350917] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
[ 3.362089] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
[ 3.370741] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm)
[ 3.377205] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
[ 3.388455] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
.....
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tegra186 board under arm64 is using this device, according to
its dts file. So this patch enables its driver with a "=m" as
the other HWMON drivers.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support for the TI HD3SS320 USB Type-C DRP Port controller driver
by turning on CONFIG_TYPEC and CONFIG_TYPEC_HD3SS3220 as modules.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Allwinner sun6i DMA drivers is used on A64 and H6 boards.
Enable it as a module.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The SUNXI_WATCHDOG option is required to make the
watchdog available on Allwinner H6.
Enable this option as a module.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The EK874 board comes with a TDA19988 chip on board, therefore
enable it in the defconfig.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sid contains speedbin information and temperature sensor
calibration information and more, which are important for SOC.
This patch enables CONFIG_NVMEM_SUNXI_SID by default.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Enable mfd and regulator driver for PMIC found on imx8mm-evk boards
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current lpi2c driver can work on imx8 chips so lets enable it. Also
enable few i2c peripherals found on imx8qxp-mek I2C (some were already
used for other boards).
Sensors enabled as modules because not required for boot.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Basic imx8mm support is already available in linux-next just not
enabled in arm64 defconfig. With this patch imx8mm-evk can boot.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MQ needs it for RTC support.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_IMX_SC_WDT as module to support i.MX system
controller watchdog.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the CONFIG_SPI_IMX option so that i.MX8M can use the
imx spi driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Mostly the usual churn due to options being reordered or not added
in the right locations.
- Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out.
-----BEGIN PGP SIGNATURE-----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=IKfA
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Mostly the usual churn due to options being reordered or not added in
the right locations.
Some various enabling of new drivers, etc.
... i.e. the usual updates, nothing particularly sticks out"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: Update UFSHCD for Hi3660 soc
ARM: multi_v7_defconfig: Enable support for STPMIC1
ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
arm64: defconfig: enable mv-xor driver
ARM: Enable Trusted Foundations for multiplatform ARM v7
ARM: tegra: Enable Trusted Foundations by default
ARM: tegra: Update default configuration for v5.1-rc1
ARM: multi_v7_defconfig: Update for moved options
ARM: multi_v7_defconfig: Update for dropped options
ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig
ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig
ARM: qcom_defconfig: add options for LG Nexus 5 phone
arm64: defconfig: include the Agilex platform to the arm64 defconfig
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Enable support for CFI NOR FLASH
ARM: shmobile: defconfig: Refresh for v5.1-rc1
ARM: multi_v7_defconfig: enable the Amlogic Meson ADC and eFuse drivers
arm64: defconfig: enable fpga and service layer
...
- Document (kerneldoc) core mfd_add_devices() API
- New Drivers
- Add support for Altera SOCFPGA System Manager
- Add support for Maxim MAX77650/77651 PMIC
- Add support for Maxim MAX77663 PMIC
- Add support for ST Multi-Function eXpander (STMFX)
- New Device Support
- Add support for LEDs to Intel Cherry Trail Whiskey Cove PMIC
- Add support for RTC to SAMSUNG Electronics S2MPA01 PMIC
- Add support for SAM9X60 to Atmel HLCDC (High-end LCD Controller)
- Add support for USB X-Powers AXP 8xx PMICs
- Add support for Integrated Sensor Hub (ISH) to ChromeOS EC
- Add support for USB PD Logger to ChromeOS EC
- Add support for AXP223 to X-Powers AXP series PMICs
- Add support for Power Supply to X-Powers AXP 803 PMICs
- Add support for Comet Lake to Intel Low Power Subsystem
- Add support for Fingerprint MCU to ChromeOS EC
- Add support for Touchpad MCU to ChromeOS EC
- Move TI LM3532 support to LED
- New Functionality
- Add/extend DT support; max77650, max77620
- Add support for power-off; max77620
- Add support for clocking; syscon
- Add support for host sleep event; cros_ec
- Fix-ups
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
- Bug Fixes
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio
-----BEGIN PGP SIGNATURE-----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=dTSD
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Framework:
- Document (kerneldoc) core mfd_add_devices() API
New Drivers:
- Altera SOCFPGA System Manager
- Maxim MAX77650/77651 PMIC
- Maxim MAX77663 PMIC
- ST Multi-Function eXpander (STMFX)
New Device Support:
- LEDs support in Intel Cherry Trail Whiskey Cove PMIC
- RTC support in SAMSUNG Electronics S2MPA01 PMIC
- SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
- USB X-Powers AXP 8xx PMICs
- Integrated Sensor Hub (ISH) in ChromeOS EC
- USB PD Logger in ChromeOS EC
- AXP223 in X-Powers AXP series PMICs
- Power Supply in X-Powers AXP 803 PMICs
- Comet Lake in Intel Low Power Subsystem
- Fingerprint MCU in ChromeOS EC
- Touchpad MCU in ChromeOS EC
- Move TI LM3532 support to LED
New Functionality:
- max77650, max77620: Add/extend DT support
- max77620 power-off
- syscon clocking
- croc_ec host sleep event
Fix-ups:
- Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
- Remove unused functionality; rk808, da9063-*
- SPDX conversion; da9063-*, atmel-*,
- Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
- Fix-up DT bindings; ti-lmu, cirrus,lochnagar
- Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb
Bug Fixes:
- Fix incorrect defined values; max77620, da9063
- Fix device initialisation; twl6040
- Reset device on init; intel-lpss
- Fix build warnings when !OF; sun6i-prcm
- Register OF match tables; tps65912-spi
- Fix DMI matching; intel_quark_i2c_gpio"
* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: Use dev_get_drvdata() directly
mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
mfd: cros_ec: Instantiate properly CrOS FP MCU device
mfd: cros_ec: Update the EC feature codes
mfd: intel-lpss: Add Intel Comet Lake PCI IDs
mfd: lochnagar: Add links to binding docs for sound and hwmon
mfd: ab8500-debugfs: Fix a typo ("deubgfs")
mfd: imx6sx: Add MQS register definition for iomuxc gpr
dt-bindings: mfd: LMU: Fix lm3632 dt binding example
mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
mfd: tps65912-spi: Add missing of table registration
mfd: axp20x: Add USB power supply mfd cell to AXP803
mfd: sun6i-prcm: Fix build warning for non-OF configurations
mfd: intel-lpss: Set the device in reset state when init
platform/chrome: Add support for v1 of host sleep event
mfd: cros_ec: Add host_sleep_event_v1 command
mfd: cros_ec: Instantiate the CrOS USB PD logger driver
mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
...
- Update the defconfig to enable the mv-xor driver found on the
Armada 3700
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXL7CVgAKCRALBhiOFHI7
1VzpAJ4g2dWLtkB9F1YlPOMGzfZnAPamKACgjUMB8UM2+avwae6rdk6oa3qudSQ=
=gg0T
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-5.2-1' of git://git.infradead.org/linux-mvebu into arm/defconfig
mvebu arm64 for 5.2 (part 1)
- Update the defconfig to enable the mv-xor driver found on the
Armada 3700
* tag 'mvebu-arm64-5.2-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable mv-xor driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Just a single patch to enable our SPI controller on the arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXLmzPwAKCRDj7w1vZxhR
xdmbAP0WZ/2DSFexF4dkaRMcMfZ74b10mh4Yvn9usm6nUll3NAEA2IbdPWLK+/pk
ocj1Jwr4KHxHnMBXES1SQ6I9AYo9YAs=
=bA+y
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Allwinner arm64 defconfig changes for 5.2
Just a single patch to enable our SPI controller on the arm64 defconfig.
* tag 'sunxi-config64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable SPI_SUN6I
Signed-off-by: Olof Johansson <olof@lixom.net>
These patches enable PWM fan and Tegra HDA support in the 64-bit ARM
default configuration, so that these features are enabled by default.
-----BEGIN PGP SIGNATURE-----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=rrf3
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.2-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.2-rc1
These patches enable PWM fan and Tegra HDA support in the 64-bit ARM
default configuration, so that these features are enabled by default.
* tag 'tegra-for-5.2-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Add PWM Fan support
arm64: defconfig: Enable Tegra HDA support
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 7ee7ef24d0 ("scsi: arm64: defconfig: enable configs for Hisilicon ufs")
set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends
on
(CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD)
were left to being built as modules.
Commit 1f4fa50dd4 ("arm64: defconfig: Regenerate for v4.20") "fixed"
that by reverting to 'CONFIG_SCSI_UFS_HISI=m'.
Thing is, if the rootfs is stored in the on-board flash (which
is the "canonical" way of doing things), we either need these drivers
to be built-in, or we need to fiddle with an initramfs to access that
flash and eventually load the modules installed over there.
The former is the easiest, do that.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
The mv-xor DMA driver is used for the XOR engine found in the ARM64
Marvell Armada 3720 SoC, so it makes sense to have it enabled in the
arm64 defconfig. A recent boot-time regression was found in mv-xor,
which would have been more easily noticed with this driver enabled by
default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MTD_NAND is large and encloses much more than what the symbol is
actually used for: raw NAND. Clarify the symbol by naming it
MTD_RAW_NAND instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The Tegra194 Jetson AGX Xavier board includes a PWM based fan. Enable
PWM fan support in the ARM64 defconfig to support the fan on this board.
Please note that the device-tree PWM fan node is already present for
this board.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable support for Tegra HDA controller in the ARM64 defconfig which is
used by Tegra210, Tegra186 and Tegra194. Please note that the Tegra HDA
controller requires the HDA HDMI/DP codec driver and so enable this as
well.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the Stratix10 System Manager by default.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Enable FPGA framework, Intel Stratix10 SoC FPGA manager, Stratix10
service layer, and Altera Freeze Bridge drivers.
Intel Stratix10 service layer driver was added with commit 7ca5ce8965
("firmware: add Intel Stratix10 service layer driver").
Intel Stratix10 service layer provides kernel APIs for drivers to request
access to the secure features. Such features include FPGA programming,
remote status update, and read and write secure registers.
While clients of the service layer can be built as modules, the service
layer itself has to be configured as built-in. The service layer is
dependent on ARCH_STRATIX10.
Enabling Altera Freeze Bridge depends on commit 38cd7ad5bd
("fpga: altera_freeze_bridge: remove restriction to socfpga").
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Enable support for RX-8571/RX-8581 RTC by turning on
CONFIG_RTC_DRV_RX8581 as module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable SUN6I SPI controller for Allwinner ARM64 SoC's.
This would helpful to setup spi flash, for another booting source.
mark it as static since it require during boot.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Two new additions to arm64's defconfig to support A64 boards.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXF1a8wAKCRDj7w1vZxhR
xYvJAQCpobGf96IZw2tNgyrz/7hd54ZjpYkkvAJuLK5wMHhHuAD/d2IBBVQ2yu5q
IX6Z40PXrKz43QFFszDThZy9tMqdng0=
=TfND
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Allwinner arm64 defconfig changes for 5.1
Two new additions to arm64's defconfig to support A64 boards.
* tag 'sunxi-config64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable SUN6I Camera sensor interface
arm64: defconfig: Enable I2C_GPIO
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable:
* PCM3168A support which is required for audio on Kingfisher daughterboards
* R-Car thermal support
* Gen3 PCIe PHY support
-----BEGIN PGP SIGNATURE-----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=gf/c
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v5.1
Enable:
* PCM3168A support which is required for audio on Kingfisher daughterboards
* R-Car thermal support
* Gen3 PCIe PHY support
* tag 'renesas-arm64-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: select Kingfisher Sound related configs
arm64: defconfig: Enable R-Car thermal driver
arm64: defconfig: Enable CONFIG_PHY_RCAR_GEN3_PCIE
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables the TCU driver to be built into the kernel, so that the TCU can
be used as debug serial on Jetson Xavier. This also enables the MAX8973
regulator driver that is required for CPU frequency scaling on Tegra210.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlxdmbgTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoZgtD/wNXlW8b6EsETNmXRDbDuzn/+C7h8l+
Vs+8FdIenjY5/ZaxcYJLjIy3/KV0phB8dS56KaiuXJJAogzi3vCSSQWhzRtw53J1
F8bOweXCQT3vDAcwziL44pNjxXRtXENcywqAhhKBAxmNQ/84W9dtB+ZcBZLJWBDg
pMSJ/kPJggnwOoSkMREP46z6EoleaD+K+nnfX5Lp14W+wOwl65YfFA+WdJRsiYlF
2kPGotmWOXUTj2rIDMBGmDLgWOsBwOVhi3TS7psWNtFflrCFPuTwUchHWyL4cTO0
h/4/4149ZrXIEcba1rkZKfH6uHaPZhMEKDFA0Nt4RKnxPHcbYMpWqxC1dmvWWHeJ
eHjStTb1UFOEyBG7LgbIkdBGXa07zHw3amCyKao6CCVVpfCfzfQ/XqMd5CYWDHc2
Gb+kFnLBiUkvDh5hLV5h6RpatJMWAlFneNUESFjURhVWRJZUfy/4hPEECaiZ/1h7
x7Yu/nTY5sSPHMkZIikxatJZfhh0rYeojf4GPkMbhNzUL+HTgjYT2aVBfsj8eZOG
4wWWFqxRugneOKpRAtu+CQSBjpX+ZxDJ91O4ov0oiWrict89Mlljp5hKGApZ2AJs
luEWJbfNm1L7oxqjg+Znhw0sMfYa2F031PQZxSWhJjaTYLTAcArBGPVbc6ucwFln
aBcs1xUAuigSEg==
=Xuyn
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration changes for v5.1-rc1
Enables the TCU driver to be built into the kernel, so that the TCU can
be used as debug serial on Jetson Xavier. This also enables the MAX8973
regulator driver that is required for CPU frequency scaling on Tegra210.
* tag 'tegra-for-5.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra TCU
arm64: defconfig: Enable MAX8973 regulator
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable a number of i.MX SoC and driver options in arm64 defconfig.
The built-in drivers include: clock, pinctrl, power domain, serial,
MBox, SCU, Ethernet, MMC, regulator and watchdog, which are mostly
essential for building an useful kernel image for i.MX8 platform,
booting with rootfs on NFS or eMMC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcYqUwAAoJEFBXWFqHsHzOJnkH/2R0OT6zLykAAvG2grUjD73x
5VTEbvlSnSrOur0vBXEZfTi6l3mvtuXj3L9wEpIB9dKgOAgGflAOqRlib0xrwFXW
JRnzgckooeEpeMbj482gN2xUIbkAg7V8P15lhrkPIGKcGDwtc2o2uTfPRMyRKxRB
szH3xl+OR38snzqtuaPEvxdguE2ZW1fMRm8CqDq3nKYD21wYW6WB6S9MLlaYfD6k
RxtjEBCbUCV7OaN90HlXi/u7fkzwDgd9dN4M18DTgP59qWkZNmZ+HGj2Wf8a3Vgc
7E/cBL+W1fbcGto+j5H2wNHYzT4C9O9EKbskKOs/HW2zojxVfNXsBrXOLMreWMk=
=dPMN
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig updates for 5.1:
- Enable a number of i.MX SoC and driver options in arm64 defconfig.
The built-in drivers include: clock, pinctrl, power domain, serial,
MBox, SCU, Ethernet, MMC, regulator and watchdog, which are mostly
essential for building an useful kernel image for i.MX8 platform,
booting with rootfs on NFS or eMMC.
* tag 'imx-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Add IMX2+ watchdog
arm64: defconfig: Enable PFUZE100 regulator
arm64: defconfig: enable NXP FlexSPI driver
arm64: defconfig: Add i.MX8MQ boot necessary configs
arm64: defconfig: add imx8qxp support
arm64: defconfig: add i.MX system controller RTC support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is needed to boot correctly from eMMC on the i.MX8MQ EVK board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Tegra Combined UART is used on some Tegra194 devices as a way of
multiplexing output from multiple producers onto a single physical UART.
Enable this by default so that it can be used as the default console to
write kernel messages to.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra210 Smaug board uses MAX77621 for both CPU & GPU rail. Note
that max8973 and max77621 share the same driver. So enable this driver
for the PMIC.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Camera sensor interface for Allwinner SUN6I SoC's.
This support enable V4L2 platform drivers static and
VIDEO_SUN6I_CSI as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The GPIO-based bitbanging I2C driver is required to configure
CSI data, clock pins on CSI block in Allwinner A64 SoC.
Let build it as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This switches out the old fbdev PL11x driver to the new
DRM driver in the Aarch64/ARM64 defconfig. Some ARM
reference designs use this IP with the Silicon Image
SII902x HDMI bridge so activate both.
The required DTS changes are already in-tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Compile the necessary drivers as modules, including codecs, for the
s400 sound card.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch selects PCM3168A which is needed for Kingfisher Sound
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable the R-Car thermal driver as a built-in.
This seems safer than enabling as a module from the point of view of
protecting equipment from overheating.
This driver is used in conjunction with the R-Car V3M (r8a77970),
E3 (r8a77990) and D3 (r8a77995) SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable R-Car Gen3 PCIe PHY support, which is needed for PCIe to function
on the Renesas Condor board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a build
fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
GPU, 256MB RAM, Wifi). This includes some acked platform-specific
drivers (serial, etc). This also include DTs for two boards with this
SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs.
-----BEGIN PGP SIGNATURE-----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=qgZw
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
The bcm2835-thermal driver was added with commit ac178e4280
("ARM64: bcm2835: add thermal driver to default config"). Unfortunately
this was accidentally dropped by commit eb1e6716cc
("arm64: defconfig: sync with savedefconfig"). So enable the driver again.
Fixes: eb1e6716cc ("arm64: defconfig: sync with savedefconfig")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit e8342cc795 ("enable CAAM crypto engine on QorIQ DPAA2 SoCs")
enabled CRYPTO_DEV_FSL_DPAA2_CAAM, which depends on FSL_MC_DPIO,
which is not set. Enable FSL_MC_BUS, and build FSL_MC_DPIO and
CRYPTO_DEV_FSL_DPAA2_CAAM as modules.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[olof: refreshed due to churn]
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit e78d57b2f8 ("pinctrl: mediatek: add pinctrl-moore that
implements the generic pinctrl dt-bindings") made PINCTRL_MT7622
depend on PINCTRL_MTK_MOORE, so it fell off in the refresh.
Add MTK_MOORE, which automatically enables MT7622.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[olof: refresh and minor commit message reword]
Signed-off-by: Olof Johansson <olof@lixom.net>
Run the platform defconfig through kbuild, and handle the trivial case
where options merely move around.
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[olof: refreshed due to some recent churn]
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Olof Johansson <olof@lixom.net>
A bunch of patches to improve the coverage of Allwinner drivers in the
arm64 defconfig, mostly targeted at adding display drivers support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqBowAKCRDj7w1vZxhR
xVZMAQCfcR+ZJf0vqHJ2fR0nOroltxrs36wU/SutdePaHInQuAD/dfdXlVonEaGN
1VBKIGzl1Z9PNTsCGADLN0dQRLlX/Q4=
=Q2ck
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Allwinner arm64 defconfig for 4.21
A bunch of patches to improve the coverage of Allwinner drivers in the
arm64 defconfig, mostly targeted at adding display drivers support.
* tag 'sunxi-config64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable PWM_SUN4I
arm64: defconfig: Enable DRM_SUN8I_DW_HDMI
arm64: defconfig: Enable DRM_SUN8I_MIXER
arm64: defconfig: Enable MFD_AXP20X_I2C
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the GCC and PINCTRL for MSM8998 to make upstream boot to console.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable a few core config options to be able to boot SDM845 MTP.
The GCC, PINCTRL and GENI options are required to be able to boot to a
console. Several clocks from GCC are parented by the "bi_tcxo" clock
from the RPMH clock driver, so enable this to save others the time to
debug the missing parent clocks later. RPMH depends on the COMMAND_DB.
While we're enabling the others let's do RPMH regulators as well, as
everything beyond this point depends on that.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable remoteproc configs to boot the remoteprocs on QC chipsets. These
are common configs and not specific to a specific SoC so should be enabled
across the board.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable GCC and pin control configs to make it possible to boot the
QCS404 EVBs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Allwinner PWM support need for ARM64 Allwinner SoC's
which used pwms, builds it as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner DesignWare HDMI is needed for HDMI support
in ARM64 Allwinner SoC's, build it as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner Display Engine 2.0 Mixer is need for ARM64
Allwinner SoC's, build it as module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Allwinner H6 SoC is paired with the X-Powers AXP805 PMIC
connected via I2C.
Enable the driver for this PMIC.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # OPI-1+
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The arm64 port now runs on servers which use IPMI. This patch enables
relevant core configs to save manually enabling them when testing
mainline.
Signed-off-by: John Garry <john.garry@huawei.com>
[olof: Switched to =m instead of =y]
Signed-off-by: Olof Johansson <olof@lixom.net>
The defconfig changes are split out from the rest again. This time we
have a number of changes for NXP i.MX and Renesas, including a cleanup of
old options.
Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm,
Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just enable
platform specific device drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJb1yrpAAoJEGCrR//JCVIn3FIP/jYpKIKb1gvuxF9jAgNRHt2q
dkAJ0eRiKewNRPnlY5KOsYpvzlhmMVCaB6ZVtEDWR/U++tlQjW9A7ZJx4b5yOr3y
7em5+dZ9nlq3G4Fx/Bs7VFoRrGQjINMFpDwSgHv2ffmH0L2r1z1eSeGHTK+82VpI
nfmj78c+W4wAv9V9p1eVUb/A68oYwnNZEjqirNHN0mFDrPCMiHTA7WeUmZ+aDAQ0
01OodB5Kh/+tYcK/Lb/2zo8IhPBfqrDdkKKaD0EWp5AcOb6LGF/Q2oFFUD22IgT1
CXJSN+/+1ObU4fo08bfAb1zruG+QDNsw1xmP2h+EbPBTAOjXkDUQBx3mRNNNbnFv
Z4yMh1dDNSg2YCpzx9x5xqIb//Brc0ZbuqO3UKHfVK2IZhUWbJXD7LPUw+Jk9QLs
Zt5JhRuJaCbZaTKPMs1XrNN5NmnutlttLVuk+pq7QaXGDsMf9I2pt887XfGakxBt
3/hpx2zU7yqjJpdv4IAcS337jqummjRhTw+4m6Fb30Fg9kcv1oBQBZYAES6pb5eQ
hI5K9IOb4IX/klnvTTB6p0jhbZskh3HHeHhrQVEzPOO9RjTRI2rQZ8VmRqwtBtKX
nBMfTLgpHtLHaHuRaI1DdX9pdq6B/ubX68hvKZEWMDk+3Use0lGlHKFtS+/M+7SH
vdNXGxqBtVsvaJsSDVKc
=cE9r
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"The defconfig changes are split out from the rest again. This time we
have a number of changes for NXP i.MX and Renesas, including a cleanup
of old options.
Some smaller changes are for Socionext Uniphier, Allwinner, Qualcomm,
Rockchip, Renesas, AT91, Hisilicon, and STM32. All of these just
enable platform specific device drivers"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
arm64: defconfig: Enable SERIAL_8250_OMAP
arm64: defconfig: Enable TI_SCI related configs
ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL
ARM: imx_v4_v5_defconfig: Remove unneeded options
ARM: imx_v4_v5_defconfig: Re-sync defconfig
ARM: mxs_defconfig: Remove unneeded options
ARM: mxs_defconfig: Re-sync defconfig
ARM: imx_v6_v7_defconfig: Remove unneeded options
ARM: imx_v6_v7_defconfig: Re-sync defconfig
ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default
ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot
ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER
ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC
ARM: multi_v7_defconfig: enable CONFIG_MMC_UNIPHIER
arm64: defconfig: enable CONFIG_MMC_UNIPHIER
ARM: multi_v7_defconfig: Enable USB phys for UniPhier SoCs
arm64: defconfig: Enable USB phys for UniPhier SoCs
arm64: defconfig: enable Rockchip Innosilicon hdmiphy
arm64: defconfig: Enable PCIEPORTBUS
arm64: defconfig: enable HiSilicon HNS3 driver
...
Enable TI System Control Interface (TI_SCI) Message Protocol library
and it's relevant power management drivers using this library.
TI's AM6 SoC uses this TI_SCI library to communicate to its system
controller(DMSC). While at it, enable TI_MESSAGE_MANAGER mailbox driver
using which this communication happens.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is a single config change to enable the DRM driver in the arm64
defconfig.
-----BEGIN PGP SIGNATURE-----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=MBKv
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig
Allwinner arm64 config changes for 4.20
Here is a single config change to enable the DRM driver in the arm64
defconfig.
* tag 'sunxi-config64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable CONFIG_DRM_SUN4I
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the USB3 and USB2 phys implemented in UniPhier SoCs.
These phys are necessary for dwc3 and ehci controllers driving
the USB ports on arm64 UniPhier SoCs.
Since the USB host drivers are already built-in, so only the phy
driver are missing to allow booting with USB devices.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The rk3228 and rk3328 socs use an MMIO-connected hdmi-phy from Innosilicon.
So enable the necessary driver as module.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Enable integrated NIC driver(hns3) for hisilicon SoCs
- Enable PCIe Port bus to support some PCIe features like
AER, hotplug, PME and DPC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Gn5v
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.20' of git://github.com/hisilicon/linux-hisi into next/defconfig
ARM64: hisilicon: defconfig updates for 4.20
- Enable integrated NIC driver(hns3) for hisilicon SoCs
- Enable PCIe Port bus to support some PCIe features like
AER, hotplug, PME and DPC
* tag 'hisi-defconfig-for-4.20' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable PCIEPORTBUS
arm64: defconfig: enable HiSilicon HNS3 driver
Signed-off-by: Olof Johansson <olof@lixom.net>
PCIe features like AER, Hotplug, PME, DPC depend on PCIEPORTBUS,
so enable PCIEPORTBUS as default.
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable CAAM (Cryptographic Accelerator and Assurance Module) driver
for QorIQ Data Path Acceleration Architecture (DPAA) v2.
It handles DPSECI (Data Path SEC Interface) DPAA2 objects that sit
on the Management Complex (MC) fsl-mc bus.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable the Renesas RZ/G2E (R8A774C0) SoC in the ARM64 defconfig.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The QRTR packet family is used for a wide range of communication between
services in Qualcomm platforms. Examples of services using this
transport for communication are remoteproc management, modem control,
positioning, power management and WiFi.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable DRM Support for Allwinner Display Engine, built as a module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Now that the scalar fallbacks have been moved out of this driver into
the core crc32()/crc32c() routines, we are left with a CRC32 crypto API
driver for arm64 that is based only on 64x64 polynomial multiplication,
which is an optional instruction in the ARMv8 architecture, and is less
and less likely to be available on cores that do not also implement the
CRC32 instructions, given that those are mandatory in the architecture
as of ARMv8.1.
Since the scalar instructions do not require the special handling that
SIMD instructions do, and since they turn out to be considerably faster
on some cores (Cortex-A53) as well, there is really no point in keeping
this code around so let's just remove it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Anson Huang