mirror of https://gitee.com/openkylin/linux.git
18116 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
44c916d58b |
ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
platforms. Among the bigger ones:
* Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
lacked active support for quite a while, and after asking around nobody
showed interest in keeping them around. If needed, they could be
resurrected in the future but it's more likely that we would prefer
reintroduction of them as DT and multiplatform-enabled platforms
instead.
* OMAP4 controller code register define diet. They defined a lot of registers
that were never actually used, etc.
* Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
to drivers/soc so it can be shared with 64-bit code. This also converts them
over to traditional driver models where possible.
* Removal of legacy gpio-samsung driver, since the last users have been
removed (moved to pinctrl)
Plus a bunch of smaller changes for various platforms that sort of
dissapear in the diffstat for the above. clps711x cleanups, shmobile
header file refactoring/moves for multiplatform friendliness, some misc
cleanups, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=gbcE
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This merge window brings a good size of cleanups on various platforms.
Among the bigger ones:
- Removal of Samsung s5pc100 and s5p64xx platforms. Both of these
have lacked active support for quite a while, and after asking
around nobody showed interest in keeping them around. If needed,
they could be resurrected in the future but it's more likely that
we would prefer reintroduction of them as DT and
multiplatform-enabled platforms instead.
- OMAP4 controller code register define diet. They defined a lot of
registers that were never actually used, etc.
- Move of some of the Tegra platform code (PMC, APBIO, fuse,
powergate) to drivers/soc so it can be shared with 64-bit code.
This also converts them over to traditional driver models where
possible.
- Removal of legacy gpio-samsung driver, since the last users have
been removed (moved to pinctrl)
Plus a bunch of smaller changes for various platforms that sort of
dissapear in the diffstat for the above. clps711x cleanups, shmobile
header file refactoring/moves for multiplatform friendliness, some
misc cleanups, etc"
* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
drivers: CCI: Correct use of ! and &
video: clcd-versatile: Depend on ARM
video: fix up versatile CLCD helper move
MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
MAINTAINERS: Remove Kirkwood
ARM: tegra: Convert PMC to a driver
soc/tegra: fuse: Set up in early initcall
ARM: tegra: Always lock the CPU reset vector
ARM: tegra: Setup CPU hotplug in a pure initcall
soc/tegra: Implement runtime check for Tegra SoCs
soc/tegra: fuse: fix dummy functions
soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
soc/tegra: Add efuse and apbmisc bindings
soc/tegra: Add efuse driver for Tegra
ARM: tegra: move fuse exports to soc/tegra/fuse.h
ARM: tegra: export apb dma readl/writel
ARM: tegra: Use a function to get the chip ID
ARM: tegra: Sort includes alphabetically
ARM: tegra: Move includes to include/soc/tegra
...
|
|
|
Caesar Wang
|
695d49d941 |
pwm: rockchip: document RK3288 SoC compatible
Document new compatible for PWM founding on RK3288 SoC Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |
|
|
Benjamin Tissoires
|
c704b4ef1a |
Input: wacom - update the ABI doc according to latest changes
Now the devices show up under hid no matter the connection (for USB and Bluetooth, not serial nor i2c). The USB devices can now be easily found under /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n> The Bluetooth devices could also be found under this path since their inclusion (April 2010), so this patch fixes the non-precise "hidraw*" path for them. The ABI has been unified while setting the LEDs and OLEDs. So Bluetooth devices lost their own LED selector but use the USB sysfs attribute. For OLEDs, Bluetooth devices handle only 1-bit images instead of 4 for USB. The documentation has been updated to match this. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
|
|
Linus Torvalds
|
a7d7a143d0 |
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull DRM updates from Dave Airlie: "Like all good pull reqs this ends with a revert, so it must mean we tested it, [ Ed. That's _one_ way of looking at it ] This pull is missing nouveau, Ben has been stuck trying to track down a very longstanding bug that revealed itself due to some other changes. I've asked him to send you a direct pull request for nouveau once he cleans things up. I'm away until Monday so don't want to delay things, you can make a decision on that when he sends it, I have my phone so I can ack things just not really merge much. It has one trivial conflict with your tree in armada_drv.c, and also the pull request contains some component changes that are already in your tree, the base tree from Russell went via Greg's tree already, but some stuff still shows up in here that doesn't when I merge my tree into yours. Otherwise all pretty standard graphics fare, one new driver and changes all over the place. New drivers: - sti kms driver for STMicroelectronics chipsets stih416 and stih407. core: - lots of cleanups to the drm core - DP MST helper code merged - universal cursor planes. - render nodes enabled by default panel: - better panel interfaces - new panel support - non-continuous cock advertising ability ttm: - shrinker fixes i915: - hopefully ditched UMS support - runtime pm fixes - psr tracking and locking - now enabled by default - userptr fixes - backlight brightness fixes - MST support merged - runtime PM for dpms - primary planes locking fixes - gen8 hw semaphore support - fbc fixes - runtime PM on SOix sleep state hw. - mmio base page flipping - lots of vlv/chv fixes. - universal cursor planes radeon: - Hawaii fixes - display scalar support for non-fixed mode displays - new firmware format support - dpm on more asics by default - GPUVM improvements - uncached and wc GTT buffers - BOs > visible VRAM exynos: - i80 interface support - module auto-loading - ipp driver consolidated. armada: - irq handling in crtc layer only - crtc renumbering - add component support - DT interaction changes. tegra: - load as module fixes - eDP bpp and sync polarity fixed - DSI non-continuous clock mode support - better support for importing buffers from nouveau msm: - mdp5/adq8084 v1.3 hw enablement - devicetree clk changse - ifc6410 board working tda998x: - component support - DT documentation update vmwgfx: - fix compat shader namespace" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (551 commits) Revert "drm: drop redundant drm_file->is_master" drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible ... |
|
|
Linus Torvalds
|
43c40df2c7 |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED updates from Bryan Wu: "This cycle we got: - a fix of attribute-creation race for the whole leds subsystem - new drivers (HID:GT683R, leds-ipaq-micro) - other fixing and clean up" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (23 commits) leds: ipaq-micro: fix sparse non static symbol warning leds: add driver for the iPAQ micro Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells leds: convert blink timer to workqueue leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default leds:pca963x: Always initialize MODE2 register leds:pca963x: Add support for PCA9635 LED driver chip HID: gt683r: move mode attribute to led-class devices HID: gt683r: fix race condition HID: add support for MSI GT683R led panels leds: lp55xx-common: fix attribute-creation race leds: lp55xx-common: fix sysfs entry leak input: lm8323: fix attribute-creation race leds: wm831x-status: fix attribute-creation race leds: ss4200: fix attribute-creation race leds: ns2: fix attribute-creation race leds: netxbig: fix attribute-creation race leds: max8997: fix attribute-creation race leds: lm3642: fix attribute-creation race leds: lm355x: fix attribute-creation race ... |
|
|
Linus Torvalds
|
e0b8b78651 |
This is the bulk pin control changes for the v3.17 merge
development cycle:
- Get rid of the .disable() callback from the driver callback
vtable. This callback was abused and counterintuitive since
a pin or group of pins can be said to always be in some
setting, and never really disabled. We now only enable a
certain muxing, and move between some certain muxings, we
never "disable" a mux setting.
- Some janitorial moving the MSM, Samsung and Nomadik and
drivers to their own subdirectories for a clearer view in
the subsystem. This will continue.
- Kill off the use of the return value from gpiochip_remove(),
this will be done in parallel in the GPIO subsystem and
hopefully not trigger too many unchecked return value
warnings before we get rid of this altogether.
- A huge set of changes and improvements to the Allwinner
sunxi drivers especially for their latest A23 and A31 SoCs,
and some ground work for the new sun8i platform family.
- A large set of Rockchip driver improvements adding support
for the RK3288 SoC.
- Advances in migration of older Freescale platforms to pin
control, especially i.MX1.
- Samsung and Exynos improvements.
- Support for the Qualcomm MSM8960 SoC.
- Use the gpiolib irqchip helpers for the ST SPEAr and
Intel Baytrail drivers.
- A bunch of nice janitorial work done with cppcheck.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=t1pR
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl updates from Linus Walleij:
"This is the bulk pin control changes for the v3.17 merge development
cycle:
- get rid of the .disable() callback from the driver callback vtable.
This callback was abused and counterintuitive since a pin or group
of pins can be said to always be in some setting, and never really
disabled. We now only enable a certain muxing, and move between
some certain muxings, we never "disable" a mux setting
- some janitorial moving the MSM, Samsung and Nomadik and drivers to
their own subdirectories for a clearer view in the subsystem. This
will continue
- kill off the use of the return value from gpiochip_remove(), this
will be done in parallel in the GPIO subsystem and hopefully not
trigger too many unchecked return value warnings before we get rid
of this altogether
- a huge set of changes and improvements to the Allwinner sunxi
drivers especially for their latest A23 and A31 SoCs, and some
ground work for the new sun8i platform family
- a large set of Rockchip driver improvements adding support for the
RK3288 SoC
- advances in migration of older Freescale platforms to pin control,
especially i.MX1
- Samsung and Exynos improvements
- support for the Qualcomm MSM8960 SoC
- use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail
drivers
- a bunch of nice janitorial work done with cppcheck"
* tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits)
pinctrl: baytrail: Convert to use gpiolib irqchip
pinctrl: sunxi: number gpio ranges starting from 0
pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
pinctrl: rockchip: add drive-strength control for rk3288
pinctrl: rockchip: add separate type for rk3288
pinctrl: rockchip: set is_generic in pinconf_ops
pinctrl: msm: drop negativity check on unsigned value
pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
pinctrl: qcom: Make muxing of gpio function explicit
pinctrl: nomadik: move all Nomadik drivers to subdir
pinctrl: samsung: Group all drivers in a sub-dir
sh-pfc: sh73a0: Introduce the use of devm_regulator_register
sh-pfc: Add renesas,pfc-r8a7791 to binding documentation
pinctrl: msm: move all qualcomm drivers to subdir
pinctrl: msm: Add msm8960 definitions
pinctrl: samsung: Allow pin value to be initialized using pinfunc
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes
pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs
pinctrl: samsung: Handle GPIO request and free using pinctrl helpers
pinctrl: samsung: Decouple direction setting from pinctrl
...
|
|
|
Linus Torvalds
|
54c72d5987 |
== Changes to existing drivers ==
- Checkpatch fixes throughout the subsystem
- Use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core
- Use DMA in rtsx_pcr
- Restrict building on unsupported architectures on timberdale, cs5535
- SPI hardening in cros_ec_spi
- More robust error handing in asic3, cros_ec, ab8500-debugfs,
max77686 and pcf50633-core
- Reorder PM runtime and regulator handing during shutdown in arizona
- Enable wakeup in cros_ec_spi
- Unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
tps65912-spi, wm5110-tables and ab8500-debugfs
- Add regulator handing into suspend() in sec-core
- Remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel
- Use cross-architecture friendly data sizes in stmpe-i2c, arizona,
max77686 and tps65910
- Device Tree documentation updates throughout
- Provide power management support in max77686
- Few OF clean-ups in max77686
- Use manged resources in tps6105x
== New drivers/supported devices ==
- Add support for s2mpu02 to sec-core
- Add support for Allwinner A32 to sun6i-prcm
- Add support for Maxim 77802 in max77686
- Add support for DA9063 AD in da9063
- Add new driver for Intel PMICs (generic) and specifically Crystal Cove
== (Re-)moved drivers ==
- Move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2cNI
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD update from Lee Jones:
"Changes to existing drivers:
- checkpatch fixes throughout the subsystem
- use Regmap to handle IRQs in max77686, extcon-max77693 and
mc13xxx-core
- use DMA in rtsx_pcr
- restrict building on unsupported architectures on timberdale,
cs5535
- SPI hardening in cros_ec_spi
- more robust error handing in asic3, cros_ec, ab8500-debugfs,
max77686 and pcf50633-core
- reorder PM runtime and regulator handing during shutdown in arizona
- enable wakeup in cros_ec_spi
- unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
tps65912-spi, wm5110-tables and ab8500-debugfs
- add regulator handing into suspend() in sec-core
- remove pointless wrapper functions in extcon-max77693 and
i2c-cros-ec-tunnel
- use cross-architecture friendly data sizes in stmpe-i2c, arizona,
max77686 and tps65910
- devicetree documentation updates throughout
- provide power management support in max77686
- few OF clean-ups in max77686
- use manged resources in tps6105x
New drivers/supported devices:
- add support for s2mpu02 to sec-core
- add support for Allwinner A32 to sun6i-prcm
- add support for Maxim 77802 in max77686
- add support for DA9063 AD in da9063
- new driver for Intel PMICs (generic) and specifically Crystal Cove
(Re-)moved drivers ==
- move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb"
* tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits)
MAINTAINERS: Update MFD repo location
mfd: omap-usb-host: Fix improper mask use.
mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it
mfd: arizona: Add missing handling for ISRC3 under/overclocked
mfd: wm5110: Add new interrupt register definitions
mfd: arizona: Rename thermal shutdown interrupt
mfd: wm5110: Add in the output done interrupts
mfd: wm5110: Remove non-existant interrupts
mfd: tps65912-spi: Remove unused variable
mfd: htc-i2cpld: Remove unused code
mfd: da9063: Add support for AD silicon variant
mfd: arizona: Map MICVDD from extcon device to the Arizona core
mfd: arizona: Add MICVDD to mapped regulators for wm8997
mfd: max77686: Ensure device type IDs are architecture agnostic
mfd: max77686: Add Maxim 77802 PMIC support
mfd: tps6105x: Use managed resources when allocating memory
mfd: wm8997-tables: Suppress 'line over 80 chars' warnings
mfd: kempld-core: Correct a variety of checkpatch warnings
mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch
mfd: si476x-cmd: Remedy checkpatch style complains
...
|
|
|
J. Bruce Fields
|
9635389534 |
exportfs: update Exporting documentation
Minor documentation updates: - refer to d_obtain_alias rather than d_alloc_anon - explain when to use d_splice_alias and when d_materialise_unique. - cut some details of d_splice_alias/d_materialise_unique implementation. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
NeilBrown
|
b8faf035ea |
VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode.
In REF-walk mode, ->d_manage can return -EISDIR to indicate that the dentry is not really a mount trap (or even a mount point) and that any mounts or any DCACHE_NEED_AUTOMOUNT flag should be ignored. RCU-walk mode doesn't currently support this, so if there is a dentry with DCACHE_NEED_AUTOMOUNT set but which shouldn't be a mount-trap, lookup_fast() will always drop in REF-walk mode. With this patch, an -EISDIR from ->d_manage will always cause mounts and automounts to be ignored, both in REF-walk and RCU-walk. Bug-fixed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Ian Kent <raven@themaw.net> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
|
|
Linus Torvalds
|
66bb0aa077 |
Here are the PPC and ARM changes for KVM, which I separated because
they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABAgAGBQJT4iIJAAoJEBvWZb6bTYbyZqoP/3Wxy8NWPFJ8HGt81NHlGnDS a9UbL7EibcOEG+aaKqmtBglTD5YDiGBDNCxxiSJaDHt+grLN4fsWIliJob1nJFoO 90f89EWN2XjeCrJXA5nUoeg5tpc5OoYKsiP6pTgzIwkP8vvs/H1+zpcTS/UmYsr/ qipVMMsM+zZeHWZcSbqjW88z7YqIn1sr5282wJ85cbyv4KGizb/G4dyPuDqLb6np hkAD8Ah6VV2suQ2FSy7G2fg20R0vglUi60hkEHLoCBPVqJCl7SmC8MvxNbjBnP8S J36R0R0u1wHYKzAGooLJGVOZ/o/gSiVqKX+++L2EvJBN+kuA6u/7fxLyBT+LwDAE IF/Aln5rpg1fe+eywvhz86WljTVEQ8bO1zVsIQUPY+/ZOPedZHMwyvXft8ogbjSp 2m9OJ/3e8Aggh0OeHpCDoeow+QDUXvX0YdCw+2Yh0p+7VMXqkyp0QEiBu38jrusC rB3VNifJbDSWLKdG9LfCAPHnxZD2XYEwv2WFBo6KQOGMGHfx0GXpCOL/jQihrhA6 HtEG5Bs3lvnHQemdpUZ58xojiABbMaUPdcnPXQQEp23WhZzrfLMLzqVG0VYnhSsC 9pi7MJj8c31rqx5WU2oRM28i/BvNxN0NCtkDpineO5s3f89Ws1xnwxqlm38AKP0J irJQTYFEqec+GM9JK1rG =hyQP -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull second round of KVM changes from Paolo Bonzini: "Here are the PPC and ARM changes for KVM, which I separated because they had small conflicts (respectively within KVM documentation, and with 3.16-rc changes). Since they were all within the subsystem, I took care of them. Stephen Rothwell reported some snags in PPC builds, but they are all fixed now; the latest linux-next report was clean. New features for ARM include: - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) And for PPC: - Book3S: Good number of LE host fixes, enable HV on LE - Book3S HV: Add in-guest debug support This release drops support for KVM on the PPC440. As a result, the PPC merge removes more lines than it adds. :) I also included an x86 change, since Davidlohr tied it to an independent bug report and the reporter quickly provided a Tested-by; there was no reason to wait for -rc2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits) KVM: Move more code under CONFIG_HAVE_KVM_IRQFD KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 KVM: PPC: Enable IRQFD support for the XICS interrupt controller KVM: Give IRQFD its own separate enabling Kconfig option KVM: Move irq notifier implementation into eventfd.c KVM: Move all accesses to kvm::irq_routing into irqchip.c KVM: irqchip: Provide and use accessors for irq routing table KVM: Don't keep reference to irq routing table in irqfd struct KVM: PPC: drop duplicate tracepoint arm64: KVM: fix 64bit CP15 VM access for 32bit guests KVM: arm64: GICv3: mandate page-aligned GICV region arm64: KVM: GICv3: move system register access to msr_s/mrs_s KVM: PPC: PR: Handle FSCR feature deselects KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr KVM: PPC: Remove DCR handling KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Handle magic page in kvmppc_ld/st ... |
|
|
Linus Torvalds
|
e306e3be1c |
- Remove unused V2 grant table support.
- Note that Konrad is xen-blkkback/front maintainer. - Add 'xen_nopv' option to disable PV extentions for x86 HVM guests. - Misc. minor cleanups. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQEcBAABAgAGBQJT4N57AAoJEFxbo/MsZsTRtfsH/2GxmloKqMZqusnz5PR/x2hd M3aXtDw36rxv3hEciIs/NX6obMenRdofDKXVMafnU/gw+EOBQQQ2n/nDqcLOSN+0 hVyrKHgByYQKaeAhAbrGiGIkuoe5JAURsaggx/YlYSx3hkE0za1XmcUjkPFEVP3l UeXXJ40H9hHgESsDwd1UQ08YNtvwdaWVHJAjio3jSxCBAHnAPhCqPhKVy/6LOr+U T6HgYsX9HLQRYBy34OOYfKBFnGOJpstnZJd3hMTYtrF4xaTl/Cnf+YxKxv/XJtGD YHukhQaEyws7RaDAXK1Uty1hlqgzDoVcFz1TixJIrF6YaO2QhhjMa/oYkbBW09s= =Ojrz -----END PGP SIGNATURE----- Merge tag 'stable/for-linus-3.17-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from David Vrabel: - remove unused V2 grant table support - note that Konrad is xen-blkkback/front maintainer - add 'xen_nopv' option to disable PV extentions for x86 HVM guests - misc minor cleanups * tag 'stable/for-linus-3.17-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: Document the 'quirks' sysfs file xen/pciback: Fix error return code in xen_pcibk_attach() xen/events: drop negativity check of unsigned parameter xen/setup: Remove Identity Map Debug Message xen/events/fifo: remove a unecessary use of BM() xen/events/fifo: ensure all bitops are properly aligned even on x86 xen/events/fifo: reset control block and local HEADs on resume xen/arm: use BUG_ON xen/grant-table: remove support for V2 tables x86/xen: safely map and unmap grant frames when in atomic context MAINTAINERS: Make me the Xen block subsystem (front and back) maintainer xen: Introduce 'xen_nopv' to disable PV extensions for HVM guests. |
|
|
Al Viro
|
82df9c8beb |
Merge commit 'ccbf62d8a284cf181ac28c8e8407dd077d90dd4b' into for-next
backmerge to avoid kernel/acct.c conflict |
|
|
Linus Torvalds
|
f536b3cae8 |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ... |
|
|
Linus Torvalds
|
e669830526 |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 3.17. It contains: - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy updates - MIPS ptrace updates and cleanups - various fixes that will also go to -stable - a number of cleanups and small non-critical fixes. - NUMA support for the Loongson 3. - more support for MSA - support for MAAR - various FP enhancements and fixes" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) MIPS: jz4740: remove unnecessary null test before debugfs_remove MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive MIPS: ZBOOT: implement stack protector in compressed boot phase MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT MIPS: Bonito64: remove a duplicate define MIPS: Malta: initialise MAARs MIPS: Initialise MAARs MIPS: detect presence of MAARs MIPS: define MAAR register accessors & bits MIPS: mark MSA experimental MIPS: Don't build MSA support unless it can be used MIPS: consistently clear MSA flags when starting & copying threads MIPS: 16 byte align MSA vector context MIPS: disable preemption whilst initialising MSA MIPS: ensure MSA gets disabled during boot MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains MIPS: fix MSA context for tasks which don't use FP first MIPS: init upper 64b of vector registers when MSA is first used MIPS: save/disable MSA in lose_fpu MIPS: preserve scalar FP CSR when switching vector context ... |
|
|
Linus Torvalds
|
ebb067d2f4 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ... |
|
|
Lee Jones
|
acad00d3d6 |
pwm: sti: Supply Device Tree binding documentation for ST's PWM IP
Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> |
|
|
Dave Airlie
|
0c6287ec12 |
drm/panel: Changes for v3.17-rc1
Panels can now be more finely controlled via .prepare() and .unprepare() callbacks in addition to .enable() and .disable(). New kerneldoc details what they are supposed to do and when they should be called. The simple panel driver gained support for a couple of new panels and it is now possible to specify additional delays during power up and power down sequences if panels require it. DSI devices can now advertise that they support non-continuous clock mode which will allow DSI host controllers to disable the high speed clock after transmissions to save power. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJT4yx+AAoJEN0jrNd/PrOh1DwQAIjgJ0a7cgc50cTLnIr48Nt0 vjDL73y7Dkfz6ouo6iIgUR3YzR4MggkJfb12ACXKgOGqwwqfTkdAxZ6jY9NCwBd/ Lja92XRVQ/THyZg5lsAWFt0ms9x1JYx8dpySyBShLygvaRMlDmoCJFpTZ8iuOquq vD5cfirKslt7ldjVKeUw8WDapbXeGNOVn0sYF+LiYr9HuP2Nj4T3ZnZQRAZIQPQz gCZi8X4lHsJFupWvhA7Pf7BaSNrJA8QwDtH4VxDpirJBcCBS8AXu9Qmbk2ib+egO It9wClhtQGzEeWgnRoux5usqF+XswRKSVK85dmgYLnjuOkLFFE4TXbV4+GQedlev ojFuHv8POK0cgxkpxf6Yir1ALWTv0AuLXdwXUpuARuixn44W7sez/PUZFa04apAD lblXXBXc3pXGxdHjz4CQ8qYG/2gYqoxTEUQoatRZZaNsLlKrdy1Rixcpcn/Aod2Y a5buMwTce7a4n+rOkV+w9c5vf+nLeGTzyBPJO17rpTYxlthLAwTNc+xs2xWe61hU m72XhIQJgotjAmKok7Dxo+r8dnuE4/sOgmIlVyYNjMux/d/gXewnFdYbnGt0+lpl OprjNqv28Khyp4Rs5qGzASDks9duTKycUPEeEN7IpTJWrDqm0N6eZg9cVSgetRJl xatc7FN732nKMtDJZ+Vo =vf7m -----END PGP SIGNATURE----- Merge tag 'drm/panel/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next drm/panel: Changes for v3.17-rc1 Panels can now be more finely controlled via .prepare() and .unprepare() callbacks in addition to .enable() and .disable(). New kerneldoc details what they are supposed to do and when they should be called. The simple panel driver gained support for a couple of new panels and it is now possible to specify additional delays during power up and power down sequences if panels require it. DSI devices can now advertise that they support non-continuous clock mode which will allow DSI host controllers to disable the high speed clock after transmissions to save power. * tag 'drm/panel/for-3.17-rc1' of git://anongit.freedesktop.org/tegra/linux: (30 commits) drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible drm/panel: simple: Add Innolux N116BGE panel support ... |
|
|
Dmitry Torokhov
|
5e2aa2ed08 |
Merge branch 'next' into for-linus
Prepare first round of input updates for 3.17. |
|
|
Linus Torvalds
|
33caee3992 |
Merge branch 'akpm' (patchbomb from Andrew Morton)
Merge incoming from Andrew Morton: - Various misc things. - arch/sh updates. - Part of ocfs2. Review is slow. - Slab updates. - Most of -mm. - printk updates. - lib/ updates. - checkpatch updates. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits) checkpatch: update $declaration_macros, add uninitialized_var checkpatch: warn on missing spaces in broken up quoted checkpatch: fix false positives for --strict "space after cast" test checkpatch: fix false positive MISSING_BREAK warnings with --file checkpatch: add test for native c90 types in unusual order checkpatch: add signed generic types checkpatch: add short int to c variable types checkpatch: add for_each tests to indentation and brace tests checkpatch: fix brace style misuses of else and while checkpatch: add --fix option for a couple OPEN_BRACE misuses checkpatch: use the correct indentation for which() checkpatch: add fix_insert_line and fix_delete_line helpers checkpatch: add ability to insert and delete lines to patch/file checkpatch: add an index variable for fixed lines checkpatch: warn on break after goto or return with same tab indentation checkpatch: emit a warning on file add/move/delete checkpatch: add test for commit id formatting style in commit log checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings checkpatch: improve "no space after cast" test checkpatch: allow multiple const * types ... |
|
|
Linus Torvalds
|
158c12948f |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree changes from Jiri Kosina: "Summer edition of trivial tree updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: fix two typos in watchdog-api.txt irq-gic: remove file name from heading comment MAINTAINERS: Add miscdevice.h to file list for char/misc drivers. scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference doc: replace "practise" with "practice" in Documentation befs: remove check for CONFIG_BEFS_RW scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY' drivers/usb/phy/phy.c: remove a leading space mfd: fix comment cpuidle: fix comment doc: hpfall.c: fix missing null-terminate after strncpy call usb: doc: hotplug.txt code typos kbuild: fix comment in Makefile.modinst SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION ARM: msm: Remove MSM_SCM crypto: Remove MPILIB_EXTRA doc: CN: remove dead link, kerneltrap.org no longer works media: update reference, kerneltrap.org no longer works hexagon: update reference, kerneltrap.org no longer works doc: LSM: update reference, kerneltrap.org no longer works ... |
|
|
Linus Torvalds
|
172bfe09dc |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
"Some highlights:
- hid-sony improvements of Sixaxis device support by Antonio Ospite
- hid-hyperv driven devices can now be used as wakeup source, by
Dexuan Cui
- hid-lenovo driver is now more generic and supports more devices, by
Jamie Lentin
- hid-huion now supports wider range of tablets, by Nikolai
Kondrashov
- other various unsorted fixes and device ID additions"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
HID: hyperv: register as a wakeup source
HID: sony: Default initialize all elements of the LED max_brightness array to 1
HID: huion: Fix sparse warnings
HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removed
HID: ignore jabra gn9350e
HID: cp2112: add I2C mode
HID: use multi input quirk for 22b9:2968
HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices
HID: rmi: check that report ids exist in the report_id_hash before accessing their size
HID: lenovo: Add support for Compact (BT|USB) keyboard
HID: lenovo: Don't call function in condition, show error codes
HID: lenovo: Prepare support for adding other devices
HID: lenovo: Rename hid-lenovo-tpkbd to hid-lenovo
HID: huion: Handle tablets with UC-Logic vendor ID
HID: huion: Switch to generating report descriptor
HID: huion: Don't ignore other interfaces
HID: huion: Use "tablet" instead of specific model
HID: add quirk for 0x04d9:0xa096 device
HID: i2c-hid: call the hid driver's suspend and resume callbacks
HID: rmi: change logging level of log messages related to unexpected reports
...
|
|
|
Linus Torvalds
|
a1b0a006ea |
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - remove unnecessary checks after platform_get_resource() - fix watchdog api documentation typo's - imx2_wdt: adds big endianness support - move restart code to the sunxi watchdog driver * git://www.linux-watchdog.org/linux-watchdog: wdt: sunxi: Move restart code to the watchdog driver Documentation: fix two typos in watchdog-api.txt watchdog: imx2_wdt: adds big endianness support. watchdog: shwdt: Remove the unnecessary check of resource after platform_get_resource() watchdog: lantiq_wdt: Remove the un-necessary check of resource after platform_get_resource() watchdog: dw_wdt: Remove the un-necessary check after platform_get_resource() |
|
|
Linus Torvalds
|
7725131982 |
ACPI and power management updates for 3.17-rc1
- ACPICA update to upstream version 20140724. That includes
ACPI 5.1 material (support for the _CCA and _DSD predefined names,
changes related to the DMAR and PCCT tables and ARM support among
other things) and cleanups related to using ACPICA's header files.
A major part of it is related to acpidump and the core code used
by that utility. Changes from Bob Moore, David E Box, Lv Zheng,
Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
- Radix trees for memory bitmaps used by the hibernation core from
Joerg Roedel.
- Support for waking up the system from suspend-to-idle (also known
as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
(Rafael J Wysocki).
- Fixes for issues related to ACPI button events (Rafael J Wysocki).
- New device ID for an ACPI-enumerated device included into the
Wildcat Point PCH from Jie Yang.
- ACPI video updates related to backlight handling from Hans de Goede
and Linus Torvalds.
- Preliminary changes needed to support ACPI on ARM from Hanjun Guo
and Graeme Gregory.
- ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
- Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
(Rafael J Wysocki).
- ACPI-based device hotplug cleanups from Wei Yongjun and
Rafael J Wysocki.
- Cleanups and improvements related to system suspend from
Lan Tianyu, Randy Dunlap and Rafael J Wysocki.
- ACPI battery cleanup from Wei Yongjun.
- cpufreq core fixes from Viresh Kumar.
- Elimination of a deadband effect from the cpufreq ondemand
governor and intel_pstate driver cleanups from Stratos Karafotis.
- 350MHz CPU support for the powernow-k6 cpufreq driver from
Mikulas Patocka.
- Fix for the imx6 cpufreq driver from Anson Huang.
- cpuidle core and governor cleanups from Daniel Lezcano,
Sandeep Tripathy and Mohammad Merajul Islam Molla.
- Build fix for the big_little cpuidle driver from Sachin Kamat.
- Configuration fix for the Operation Performance Points (OPP)
framework from Mark Brown.
- APM cleanup from Jean Delvare.
- cpupower utility fixes and cleanups from Peter Senna Tschudin,
Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ZODv
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
commits) and system suspend/hibernation (9 commits).
From the new code perspective, the ACPICA update brings ACPI 5.1 to
the table, including a new device configuration object called _DSD
(Device Specific Data) that will hopefully help us to operate device
properties like Device Trees do (at least to some extent) and changes
related to supporting ACPI on ARM.
Apart from that we have hibernation changes making it use radix trees
to store memory bitmaps which should speed up some operations carried
out by it quite significantly. We also have some power management
changes related to suspend-to-idle (the "freeze" sleep state) support
and more preliminary changes needed to support ACPI on ARM (outside of
ACPICA).
The rest is fixes and cleanups pretty much everywhere.
Specifics:
- ACPICA update to upstream version 20140724. That includes ACPI 5.1
material (support for the _CCA and _DSD predefined names, changes
related to the DMAR and PCCT tables and ARM support among other
things) and cleanups related to using ACPICA's header files. A
major part of it is related to acpidump and the core code used by
that utility. Changes from Bob Moore, David E Box, Lv Zheng,
Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
- Radix trees for memory bitmaps used by the hibernation core from
Joerg Roedel.
- Support for waking up the system from suspend-to-idle (also known
as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
(Rafael J Wysocki).
- Fixes for issues related to ACPI button events (Rafael J Wysocki).
- New device ID for an ACPI-enumerated device included into the
Wildcat Point PCH from Jie Yang.
- ACPI video updates related to backlight handling from Hans de Goede
and Linus Torvalds.
- Preliminary changes needed to support ACPI on ARM from Hanjun Guo
and Graeme Gregory.
- ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
- Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
(Rafael J Wysocki).
- ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
Wysocki.
- Cleanups and improvements related to system suspend from Lan
Tianyu, Randy Dunlap and Rafael J Wysocki.
- ACPI battery cleanup from Wei Yongjun.
- cpufreq core fixes from Viresh Kumar.
- Elimination of a deadband effect from the cpufreq ondemand governor
and intel_pstate driver cleanups from Stratos Karafotis.
- 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
Patocka.
- Fix for the imx6 cpufreq driver from Anson Huang.
- cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
Tripathy and Mohammad Merajul Islam Molla.
- Build fix for the big_little cpuidle driver from Sachin Kamat.
- Configuration fix for the Operation Performance Points (OPP)
framework from Mark Brown.
- APM cleanup from Jean Delvare.
- cpupower utility fixes and cleanups from Peter Senna Tschudin,
Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
Renninger"
* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
ACPI / LPSS: add LPSS device for Wildcat Point PCH
ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
ACPICA: Update version to 20140724.
ACPICA: ACPI 5.1: Update for PCCT table changes.
ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
ACPICA/ARM: ACPI 5.1: Update for MADT changes.
ACPICA/ARM: ACPI 5.1: Update for FADT changes.
ACPICA: ACPI 5.1: Support for the _CCA predifined name.
ACPICA: ACPI 5.1: New notify value for System Affinity Update.
ACPICA: ACPI 5.1: Support for the _DSD predefined name.
ACPICA: Debug object: Add current value of Timer() to debug line prefix.
ACPICA: acpihelp: Add UUID support, restructure some existing files.
ACPICA: Utilities: Fix local printf issue.
ACPICA: Tables: Update for DMAR table changes.
ACPICA: Remove some extraneous printf arguments.
ACPICA: Update for comments/formatting. No functional changes.
ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
ACPICA: Work around an ancient GCC bug.
ACPI / processor: Make it possible to get local x2apic id via _MAT
...
|
|
|
Linus Torvalds
|
6b22df74f7 |
SCSI misc on 20140806
This patch set consists of the usual driver updates (ufs, storvsc, pm8001 hpsa). It also has removal of the user space target driver code (everyone is using LIO now), a partial PCI MSI-X update, more multi-queue updates, conversion to 64 bit LUNs (so we could theoretically cope with any LUN returned by a device) and placeholder support for the ZBC device type (Shingle drives), plus an assortment of minor updates and bug fixes. Signed-off-by: James Bottomley <JBottomley@Parallels.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAABAgAGBQJT4mS9AAoJEDeqqVYsXL0Mq34H/2AeXiM8GEVO3PIsBtF3TFZ9 poJvAyb8t//+VwAIVLHU9wrssIrIcyvNQmNHH/InGt5rOaXwGQRsnEc73bBtot4b aC1t+hAnp2Ddvu6phmyUg7iY2GmQhAoZmeaj7krGIu2XgtLGiPg26eSsgk4Yv/U9 cuULEuOc/UnTj3w5VK8SvpyXMybVF6oQhSrS1slOglfFwPTlTI/NHU9xo7Wc3qHT VifHXNphIvye5EH8zwtKX5p8qCrFW0pevJwyfPz7Hp2CTA9XYKx3SoeOh+n9F9ez udBBggg7Vb1tb4mPKUoZ78UrtCVdFSCmesBU/RJe7cIh8daKaO5MVr3WPSx2JhM= =yGai -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (ufs, storvsc, pm8001 hpsa). It also has removal of the user space target driver code (everyone is using LIO now), a partial PCI MSI-X update, more multi-queue updates, conversion to 64 bit LUNs (so we could theoretically cope with any LUN returned by a device) and placeholder support for the ZBC device type (Shingle drives), plus an assortment of minor updates and bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (143 commits) scsi: do not issue SCSI RSOC command to Promise Vtrak E610f vmw_pvscsi: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Fix invalid return when request_irq() failed lpfc: Remove superfluous call to pci_disable_msix() isci: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Use pci_enable_msix_exact() instead of pci_enable_msix() bfa: Cleanup bfad_setup_intr() function bfa: Do not call pci_enable_msix() after it failed once fnic: Use pci_enable_msix_exact() instead of pci_enable_msix() scsi: use short driver name for per-driver cmd slab caches scsi_debug: support scsi-mq, queues and locks Drivers: add blist flags scsi: ufs: fix endianness sparse warnings scsi: ufs: make undeclared functions static bnx2i: Update driver version to 2.7.10.1 pm8001: fix a memory leak in nvmd_resp pm8001: fix update_flash pm8001: fix a memory leak in flash_update pm8001: Cleaning up uninitialized variables pm8001: Fix to remove null pointer checks that could never happen ... |
|
|
Linus Torvalds
|
930e0312bc |
sound updates for 3.17-rc1
There've been many updates in ASoC side at this time, especially the
framework enhancement for multiple CODECs on a single DAI and more
componentization works. The only major change in ALSA core is the
addition of timestamp type in sw_params field. This should behave in
backward compatible way. Other than that, there are lots of small
changes and new drivers in wide range, including a large code cut in
HD-audio driver for deprecated static quirks. Some highlights are
below:
ALSA Core:
- Add the new timestamp type field to sw_params to choose
MONOTONIC_RAW type
HD-audio:
- Continued conversion to standard printk macros, generic code
cleanups
- Removal of obsoleted static quirk codes for Conexant and C-Media
codecs
- Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED,
Gigabyte BXBT-2807 mobo
- Intel Braswell support
ASoC:
- Support for multiple CODECs attached to a single DAI, enabling
systems with for example multiple DAC/speaker drivers on a single
link, contributed by Benoit Cousson based on work from Misael Lopez
Cruz
- Support for byte controls larger than 256 bytes based on the use of
TLVs contributed by Omair Mohammed Abdullah
- More componentisation work from Lars-Peter Clausen
- The remainder of the conversions of CODEC drivers to params_width()
by Mark Brown
- Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas
Instruments TAS2552
- Lots of updates and fixes, especially to the DaVinci, Intel,
Freescale, Realtek, and rcar drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=RL72
-----END PGP SIGNATURE-----
Merge tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There've been many updates in ASoC side at this time, especially the
framework enhancement for multiple CODECs on a single DAI and more
componentization works.
The only major change in ALSA core is the addition of timestamp type
in sw_params field. This should behave in backward compatible way.
Other than that, there are lots of small changes and new drivers in
wide range, including a large code cut in HD-audio driver for
deprecated static quirks. Some highlights are below:
ALSA Core:
- Add the new timestamp type field to sw_params to choose
MONOTONIC_RAW type
HD-audio:
- Continued conversion to standard printk macros, generic code
cleanups
- Removal of obsoleted static quirk codes for Conexant and C-Media
codecs
- Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED,
Gigabyte BXBT-2807 mobo
- Intel Braswell support
ASoC:
- Support for multiple CODECs attached to a single DAI, enabling
systems with for example multiple DAC/speaker drivers on a single
link, contributed by Benoit Cousson based on work from Misael Lopez
Cruz
- Support for byte controls larger than 256 bytes based on the use of
TLVs contributed by Omair Mohammed Abdullah
- More componentisation work from Lars-Peter Clausen
- The remainder of the conversions of CODEC drivers to params_width()
by Mark Brown
- Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks,
Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas
Instruments TAS2552
- Lots of updates and fixes, especially to the DaVinci, Intel,
Freescale, Realtek, and rcar drivers"
* tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits)
ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.*
ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input
sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata
sound/oss/opl3: Remove typedef opl_devinfo
ALSA: fireworks: fix specifiers in format strings for propper output
ASoC: imx-audmux: Use uintptr_t for port numbers
ASoC: davinci: Enable menuconfig entry for McASP
ASoC: fsl_asrc: Don't access members of config before checking it
ASoC: fsl_sarc_dma: Check pair before using it
ASoC: adau1977: Fix truncation warning on 64 bit architectures
ALSA: virtuoso: add Xonar Essence STX II support
ALSA: riptide: fix %d confusingly prefixed with 0x in format strings
ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings
ALSA: hda - add codec ID for Braswell display audio codec
ALSA: hda - add PCI IDs for Intel Braswell
ALSA: usb-audio: Adjust Gamecom 780 volume level
ALSA: usb-audio: improve dmesg source grepability
ASoC: rt5670: Fix duplicate const warnings
ASoC: rt5670: Staticise non-exported symbols
ASoC: Intel: update stream only on stream IPC msgs
...
|
|
|
Linus Torvalds
|
0498cf8429 |
power supply changes for the v3.17 series
- Added iPaq h3xxx battery driver - Added Broadcom STB reset driver - DT support for rx51-battery - misc. fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJT4WyFAAoJENju1/PIO/qaYvwP/0EcchAHFS6mCyYAs8/h9JPC HMwlGh899FlFtu1Ggr5VIZnWKOdKKmOTcg0HFS63KjFGglyCzrRysXU2oa62LMla d6n7sGzlFFC+OE5neBFs44ieg5iFcff++Vw2Xij804SZDNMTaMzpNASh4jmjmxD3 DHxVLYLQd1Xx30kB/KyXhi+UIMvZDKF2F06CmViNg8eQiq59FTsjYeIJAxFJrfyN C95a3BEnzDuK8w9ylj0pN25bWpScI7B+AaC/bFz9qBRDqeKTQkj1D0t6ZLr7pJnN a2lf+w3px6RBaK+O2fez9z8Drpi35BuaJ4x4f0ieWvlONanvRc6kyLwzggs40X2U BQbgSj88Chk3S6rfdGDYxw8qxcgtrkG1jeazsusdQxRik1vLnjWIw26yYB2Qs5mg zz38h21Ur3l72GTUuTYU+gvX7fHZe81asZaQvb9j/SgYu5NSX2xrVmwYB4z6V0Uj SK5Chp45X7xonRQO9jqnFIN2ADF49cOjPflBHBr7bU4lMFciG2DEN10W9YeVMLDG iYvjNWaztzuxIVEXIwiVAJluVp/379TLZ47/dmdMt4zUBqccAFn0ZiyZFScOku2F gxHzQhFPZueOfo3Mv65SP8RXEVn4ZaLAK+vk/u//orXHf5KGmNf8hLg+40aZT/bw FL2MkAtOgwKtuz70ddya =6Y4V -----END PGP SIGNATURE----- Merge tag 'for-v3.17' of git://git.infradead.org/battery-2.6 Pull power supply changes from Sebastian Reichel: - Added iPaq h3xxx battery driver - Added Broadcom STB reset driver - DT support for rx51-battery - misc. fixes * tag 'for-v3.17' of git://git.infradead.org/battery-2.6: ipaq_micro_battery: fix sparse non static symbol warning power: add driver for battery reading on iPaq h3xxx power: twl4030_charger: detect battery presence prior to enabling charger power: reset: Add reboot driver for brcmstb power_supply: Fix sparse non static symbol warning power_supply: Add inlmt,iterm, min/max temp props charger: tps65090: Allow charger module to be used when no irq power/reset: Fix GPL v2 license string typo power: poweroff: gpio: convert to use descriptors bq27000: report missing device better. bq27x00_battery: Introduce the use of the managed version of kzalloc Documentation: DT: Document rx51-battery binding rx51_battery: convert to iio consumer bq2415x_charger: Fix Atomic Sleep Bug |
|
|
Ken Helias
|
1d023284c3 |
list: fix order of arguments for hlist_add_after(_rcu)
All other add functions for lists have the new item as first argument and the position where it is added as second argument. This was changed for no good reason in this function and makes using it unnecessary confusing. The name was changed to hlist_add_behind() to cause unconverted code to generate a compile error instead of using the wrong parameter order. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ken Helias <kenhelias@firemail.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [intel driver bits] Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Luis R. Rodriguez
|
23b2899f7f |
printk: allow increasing the ring buffer depending on the number of CPUs
The default size of the ring buffer is too small for machines with a large amount of CPUs under heavy load. What ends up happening when debugging is the ring buffer overlaps and chews up old messages making debugging impossible unless the size is passed as a kernel parameter. An idle system upon boot up will on average spew out only about one or two extra lines but where this really matters is on heavy load and that will vary widely depending on the system and environment. There are mechanisms to help increase the kernel ring buffer for tracing through debugfs, and those interfaces even allow growing the kernel ring buffer per CPU. We also have a static value which can be passed upon boot. Relying on debugfs however is not ideal for production, and relying on the value passed upon bootup is can only used *after* an issue has creeped up. Instead of being reactive this adds a proactive measure which lets you scale the amount of contributions you'd expect to the kernel ring buffer under load by each CPU in the worst case scenario. We use num_possible_cpus() to avoid complexities which could be introduced by dynamically changing the ring buffer size at run time, num_possible_cpus() lets us use the upper limit on possible number of CPUs therefore avoiding having to deal with hotplugging CPUs on and off. This introduces the kernel configuration option LOG_CPU_MAX_BUF_SHIFT which is used to specify the maximum amount of contributions to the kernel ring buffer in the worst case before the kernel ring buffer flips over, the size is specified as a power of 2. The total amount of contributions made by each CPU must be greater than half of the default kernel ring buffer size (1 << LOG_BUF_SHIFT bytes) in order to trigger an increase upon bootup. The kernel ring buffer is increased to the next power of two that would fit the required minimum kernel ring buffer size plus the additional CPU contribution. For example if LOG_BUF_SHIFT is 18 (256 KB) you'd require at least 128 KB contributions by other CPUs in order to trigger an increase of the kernel ring buffer. With a LOG_CPU_BUF_SHIFT of 12 (4 KB) you'd require at least anything over > 64 possible CPUs to trigger an increase. If you had 128 possible CPUs the amount of minimum required kernel ring buffer bumps to: ((1 << 18) + ((128 - 1) * (1 << 12))) / 1024 = 764 KB Since we require the ring buffer to be a power of two the new required size would be 1024 KB. This CPU contributions are ignored when the "log_buf_len" kernel parameter is used as it forces the exact size of the ring buffer to an expected power of two value. [pmladek@suse.cz: fix build] Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Davidlohr Bueso <davidlohr@hp.com> Tested-by: Petr Mladek <pmladek@suse.cz> Reviewed-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Joe Perches <joe@perches.com> Cc: Arun KS <arunks.linux@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Chen Yucong
|
2c51856c9b |
mm: trace-vmscan-postprocess.pl: report the number of file/anon pages respectively
Until now, the reporting from trace-vmscan-postprocess.pl is not very useful because we cannot directly use this script for checking the file/anon ratio of scanning. This patch aims to report respectively the number of file/anon pages which were scanned/reclaimed by kswapd or direct-reclaim. Sample output is usually something like the following. Summary Direct reclaims: 8823 Direct reclaim pages scanned: 2438797 Direct reclaim file pages scanned: 1315200 Direct reclaim anon pages scanned: 1123597 Direct reclaim pages reclaimed: 446139 Direct reclaim file pages reclaimed: 378668 Direct reclaim anon pages reclaimed: 67471 Direct reclaim write file sync I/O: 0 Direct reclaim write anon sync I/O: 0 Direct reclaim write file async I/O: 0 Direct reclaim write anon async I/O: 4240 Wake kswapd requests: 122310 Time stalled direct reclaim: 13.78 seconds Kswapd wakeups: 25817 Kswapd pages scanned: 170779115 Kswapd file pages scanned: 162725123 Kswapd anon pages scanned: 8053992 Kswapd pages reclaimed: 129065738 Kswapd file pages reclaimed: 128500930 Kswapd anon pages reclaimed: 564808 Kswapd reclaim write file sync I/O: 0 Kswapd reclaim write anon sync I/O: 0 Kswapd reclaim write file async I/O: 36 Kswapd reclaim write anon async I/O: 730730 Time kswapd awake: 1015.50 seconds Signed-off-by: Chen Yucong <slaoub@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
ae045e2455 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Highlights:
1) Steady transitioning of the BPF instructure to a generic spot so
all kernel subsystems can make use of it, from Alexei Starovoitov.
2) SFC driver supports busy polling, from Alexandre Rames.
3) Take advantage of hash table in UDP multicast delivery, from David
Held.
4) Lighten locking, in particular by getting rid of the LRU lists, in
inet frag handling. From Florian Westphal.
5) Add support for various RFC6458 control messages in SCTP, from
Geir Ola Vaagland.
6) Allow to filter bridge forwarding database dumps by device, from
Jamal Hadi Salim.
7) virtio-net also now supports busy polling, from Jason Wang.
8) Some low level optimization tweaks in pktgen from Jesper Dangaard
Brouer.
9) Add support for ipv6 address generation modes, so that userland
can have some input into the process. From Jiri Pirko.
10) Consolidate common TCP connection request code in ipv4 and ipv6,
from Octavian Purdila.
11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.
12) Generic resizable RCU hash table, with intial users in netlink and
nftables. From Thomas Graf.
13) Maintain a name assignment type so that userspace can see where a
network device name came from (enumerated by kernel, assigned
explicitly by userspace, etc.) From Tom Gundersen.
14) Automatic flow label generation on transmit in ipv6, from Tom
Herbert.
15) New packet timestamping facilities from Willem de Bruijn, meant to
assist in measuring latencies going into/out-of the packet
scheduler, latency from TCP data transmission to ACK, etc"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
cxgb4 : Disable recursive mailbox commands when enabling vi
net: reduce USB network driver config options.
tg3: Modify tg3_tso_bug() to handle multiple TX rings
amd-xgbe: Perform phy connect/disconnect at dev open/stop
amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
net: sun4i-emac: fix memory leak on bad packet
sctp: fix possible seqlock seadlock in sctp_packet_transmit()
Revert "net: phy: Set the driver when registering an MDIO bus device"
cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
team: Simplify return path of team_newlink
bridge: Update outdated comment on promiscuous mode
net-timestamp: ACK timestamp for bytestreams
net-timestamp: TCP timestamping
net-timestamp: SCHED timestamp on entering packet scheduler
net-timestamp: add key to disambiguate concurrent datagrams
net-timestamp: move timestamp flags out of sk_flags
net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
cxgb4i : Move stray CPL definitions to cxgb4 driver
tcp: reduce spurious retransmits due to transient SACK reneging
qlcnic: Initialize dcbnl_ops before register_netdev
...
|
|
|
Linus Torvalds
|
bb2cbf5e93 |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris: "In this release: - PKCS#7 parser for the key management subsystem from David Howells - appoint Kees Cook as seccomp maintainer - bugfixes and general maintenance across the subsystem" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (94 commits) X.509: Need to export x509_request_asymmetric_key() netlabel: shorter names for the NetLabel catmap funcs/structs netlabel: fix the catmap walking functions netlabel: fix the horribly broken catmap functions netlabel: fix a problem when setting bits below the previously lowest bit PKCS#7: X.509 certificate issuer and subject are mandatory fields in the ASN.1 tpm: simplify code by using %*phN specifier tpm: Provide a generic means to override the chip returned timeouts tpm: missing tpm_chip_put in tpm_get_random() tpm: Properly clean sysfs entries in error path tpm: Add missing tpm_do_selftest to ST33 I2C driver PKCS#7: Use x509_request_asymmetric_key() Revert "selinux: fix the default socket labeling in sock_graft()" X.509: x509_request_asymmetric_keys() doesn't need string length arguments PKCS#7: fix sparse non static symbol warning KEYS: revert encrypted key change ima: add support for measuring and appraising firmware firmware_class: perform new LSM checks security: introduce kernel_fw_from_file hook PKCS#7: Missing inclusion of linux/err.h ... |
|
|
Ajay Kumar
|
3e51d60932 |
drm/panel: simple: Add AUO B133HTN01 panel support
The AUO B133HTN01 is a 13.6" FHD TFT LCD panel connecting to an eDP interface and with an integrated LED backlight unit. This panel is used on the Samsung Chromebook 2 (XE503C32). Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
Thierry Reding
|
0a2288c06a |
drm/panel: simple: Add Innolux N116BGE panel support
The Innolux N116BGE is an 11.6" WXGA TFT LCD panel connecting to an eDP interface and with an integrated LED backlight unit. It is used in the Tegra132 Norrin reference design. Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
Linus Torvalds
|
e7fda6c4c3 |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer and time updates from Thomas Gleixner:
"A rather large update of timers, timekeeping & co
- Core timekeeping code is year-2038 safe now for 32bit machines.
Now we just need to fix all in kernel users and the gazillion of
user space interfaces which rely on timespec/timeval :)
- Better cache layout for the timekeeping internal data structures.
- Proper nanosecond based interfaces for in kernel users.
- Tree wide cleanup of code which wants nanoseconds but does hoops
and loops to convert back and forth from timespecs. Some of it
definitely belongs into the ugly code museum.
- Consolidation of the timekeeping interface zoo.
- A fast NMI safe accessor to clock monotonic for tracing. This is a
long standing request to support correlated user/kernel space
traces. With proper NTP frequency correction it's also suitable
for correlation of traces accross separate machines.
- Checkpoint/restart support for timerfd.
- A few NOHZ[_FULL] improvements in the [hr]timer code.
- Code move from kernel to kernel/time of all time* related code.
- New clocksource/event drivers from the ARM universe. I'm really
impressed that despite an architected timer in the newer chips SoC
manufacturers insist on inventing new and differently broken SoC
specific timers.
[ Ed. "Impressed"? I don't think that word means what you think it means ]
- Another round of code move from arch to drivers. Looks like most
of the legacy mess in ARM regarding timers is sorted out except for
a few obnoxious strongholds.
- The usual updates and fixlets all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
timekeeping: Fixup typo in update_vsyscall_old definition
clocksource: document some basic timekeeping concepts
timekeeping: Use cached ntp_tick_length when accumulating error
timekeeping: Rework frequency adjustments to work better w/ nohz
timekeeping: Minor fixup for timespec64->timespec assignment
ftrace: Provide trace clocks monotonic
timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
seqcount: Add raw_write_seqcount_latch()
seqcount: Provide raw_read_seqcount()
timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
timekeeping: Create struct tk_read_base and use it in struct timekeeper
timekeeping: Restructure the timekeeper some more
clocksource: Get rid of cycle_last
clocksource: Move cycle_last validation to core code
clocksource: Make delta calculation a function
wireless: ath9k: Get rid of timespec conversions
drm: vmwgfx: Use nsec based interfaces
drm: i915: Use nsec based interfaces
timekeeping: Provide ktime_get_raw()
hangcheck-timer: Use ktime_get_ns()
...
|
|
|
Linus Torvalds
|
08d69a2571 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Nothing spectacular from the irq department this time:
- overhaul of the crossbar chip driver
- overhaul of the spear shirq chip driver
- support for the atmel-aic chip
- code move from arch to drivers
- the usual tiny fixlets
- two reverts worth to mention which undo the too simple attempt of
supporting wakeup interrupts on shared interrupt lines"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
Revert "irq: Warn when shared interrupts do not match on NO_SUSPEND"
Revert "PM / sleep / irq: Do not suspend wakeup interrupts"
irq: Warn when shared interrupts do not match on NO_SUSPEND
irqchip: atmel-aic: Define irq fixups for atmel SoCs
irqchip: atmel-aic: Implement RTC irq fixup
irqchip: atmel-aic: Add irq fixup infrastructure
irqchip: atmel-aic: Add atmel AIC/AIC5 drivers
irqchip: atmel-aic: Move binding doc to interrupt-controller directory
genirq: generic chip: Export irq_map_generic_chip function
PM / sleep / irq: Do not suspend wakeup interrupts
irqchip: or1k-pic: Migrate from arch/openrisc/
irqchip: crossbar: Allow for quirky hardware with direct hardwiring of GIC
documentation: dt: omap: crossbar: Add description for interrupt consumer
irqchip: crossbar: Introduce centralized check for crossbar write
irqchip: crossbar: Introduce ti, max-crossbar-sources to identify valid crossbar mapping
irqchip: crossbar: Add kerneldoc for crossbar_domain_unmap callback
irqchip: crossbar: Set cb pointer to null in case of error
irqchip: crossbar: Change the goto naming
irqchip: crossbar: Return proper error value
irqchip: crossbar: Fix kerneldoc warning
...
|
|
|
Linus Torvalds
|
f4d33337ea |
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - removal of sn9c102. This device driver was replaced a long time ago by gspca - solo6x10 and go7007 webcam drivers moved from staging into mainstream. They were waiting for an API to allow setting the image detection matrix - SDR drivers moved from staging into mainstream: sdr-msi3101 (renamed as msi2500) and rtl2832 - added SDR driver for airspy - added demux driver: si2165 - rework at several RC subsystem, making the code for RC-5 SZ variant to be added at the standard RC5 decoder - added decoder for the XMP IR protocol - tuner driver moved from staging into mainstream: msi3101 (renamed as msi001) - added documentation for some additional SDR pixfmt - some device tree bindings documented - added support for exynos3250 at s5p-jpeg - remove the obsolete, unmaintained and broken mx1_camera driver - added support for remote controllers at au0828 driver - added a RC driver: sunxi-cir - several driver fixes, enhancements and cleanups. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (455 commits) [media] cx23885: fix UNSET/TUNER_ABSENT confusion [media] coda: fix build error by making reset control optional [media] radio-miropcm20: fix sparse NULL pointer warning [media] MAINTAINERS: Update go7007 pattern [media] MAINTAINERS: Update solo6x10 patterns [media] media: atmel-isi: add primary DT support [media] media: atmel-isi: convert the pdata from pointer to structure [media] media: atmel-isi: add v4l2 async probe support [media] rcar_vin: add devicetree support [media] media: pxa_camera device-tree support [media] media: mt9m111: add device-tree suppport [media] soc_camera: add support for dt binding soc_camera drivers [media] media: soc_camera: pxa_camera documentation device-tree support [media] media: mt9m111: add device-tree documentation [media] s5p-mfc: remove unnecessary calling to function video_devdata() [media] s5p-jpeg: add chroma subsampling adjustment for Exynos3250 [media] s5p-jpeg: Prevent erroneous downscaling for Exynos3250 SoC [media] s5p-jpeg: Assure proper crop rectangle initialization [media] s5p-jpeg: fix g_selection op [media] s5p-jpeg: Adjust jpeg_bound_align_image to Exynos3250 needs ... |
|
|
Linus Torvalds
|
91c2ff7708 |
regulator: Updates for v3.17
A couple of nice new features this month, the ability to map regulators
in order to allow voltage control by external coprocessors is something
people have been asking for for a long time.
- Improved support for switch only "regulators", allowing current state
to be read from the parent regulator but no setting.
- Support for obtaining the register access method used to set
voltages, for use in systems which can offload control of this to a
coprocessor (typically for DVFS).
- Support for Active-Semi AC8846, Dialog DA9211 and Texas Instruments
TPS65917.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bbhE
-----END PGP SIGNATURE-----
Merge tag 'regulator-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A couple of nice new features this month, the ability to map
regulators in order to allow voltage control by external coprocessors
is something people have been asking for for a long time.
- improved support for switch only "regulators", allowing current
state to be read from the parent regulator but no setting.
- support for obtaining the register access method used to set
voltages, for use in systems which can offload control of this to a
coprocessor (typically for DVFS).
- support for Active-Semi AC8846, Dialog DA9211 and Texas Instruments
TPS65917"
* tag 'regulator-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (58 commits)
regulator: act8865: fix build when OF is not enabled
regulator: act8865: add act8846 to DT binding documentation
regulator: act8865: add support for act8846
regulator: act8865: prepare support for other act88xx devices
regulator: act8865: set correct number of regulators in pdata
regulator: act8865: Remove error variable in act8865_pmic_probe
regulator: act8865: fix parsing of platform data
regulator: tps65090: Set voltage for fixed regulators
regulator: core: Allow to get voltage count and list from parent
regulator: core: Get voltage from parent if not available
regulator: Add missing statics and inlines for stub functions
regulator: lp872x: Don't set constraints within the regulator driver
regmap: Fix return code for stub regmap_get_device()
regulator: s2mps11: Update module description and Kconfig to add S2MPU02 support
regulator: Add helpers for low-level register access
regmap: Allow regmap_get_device() to be used by modules
regmap: Add regmap_get_device
regulator: da9211: Remove unnecessary devm_regulator_unregister() calls
regulator: Add DT bindings for tps65218 PMIC regulators.
regulator: da9211: new regulator driver
...
|
|
|
Linus Torvalds
|
1325b6550a |
spi: Updates for v3.17
A quiet release, more bug fixes than anything else. A few things do
stand out though:
- Updates to several drivers to move towards the standard GPIO chip
select handling in the core.
- DMA support for the SH MSIOF driver.
- Support for Rockchip SPI controllers (their first mainline
submission).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJT4RsmAAoJELSic+t+oim9Kd0P/A3bTbf7UiK9t3NgbpIDO+yJ
JHe8O5OtxeAWGiuv9RF47Gutr8061Rww0yzX2+iiRBkaOYE7TZfdUVSBT8LnTrw6
WFye5pmxy25mDX97OJnhlsddPEoCxb/a4MlcqcCxULsHcyU9jIM+uId1v6LxMC3d
QtuB2Fuxzhhqmdfg9NLdsVsMWiwVwZn20Cmxt7Fc9EzwK6BBs1U50/X/wJHzBQ4K
fbl3hwxKODBd7aMG9DRHt4cW04WG5wQYkJS54ThUAROebqjEx8YWbNIszKA1fQcW
jBcd8Oieo724/jGZq1/U4RJUpRKmwx/ug31nrYx/Mcp+Za+yIZ1dwxAcK5AkdJNa
1lw5LGMLcP04EN0pdKKyrVwwkzV60fwrV9ELcZcnbpKhcvR0G4g7pbKufNIcGu64
0RGTnq1Y0HD1/0Zcomdt1oSSA4gv1B2Va7ZBM/SaphA+MW6EN0KfGMmcopJA5gAD
Dv66ijnIUjkKqJb4HsWa4gcq6EnqiK/GUzr9Pjng4ogl8/OF+OYOa+mYnj4DP98p
aXy/IUKSNDRwY6tV6Z4eEXnhsHWmkzfqYwZoEZVZIR7Dytl1oxdK4kW5BC0hJRc1
DrgnVMgxsIMfVD3RVbqLN4zPyFBmKHwXrcTMHQuv4ndfhiDck0u4uiF5CNCap1I1
ThAHObRbw+X/9D0ywFK/
=u37g
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A quiet release, more bug fixes than anything else. A few things do
stand out though:
- updates to several drivers to move towards the standard GPIO chip
select handling in the core.
- DMA support for the SH MSIOF driver.
- support for Rockchip SPI controllers (their first mainline
submission)"
* tag 'spi-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
spi: davinci: use spi_device.cs_gpio to store gpio cs per spi device
spi: davinci: add support to configure gpio cs through dt
spi/pl022: Explicitly truncate large bitmask
spi/atmel: Fix pointer to int conversion warnings on 64 bit builds
spi: davinci: fix to support more than 2 chip selects
spi: topcliff-pch: don't hardcode PCI slot to get DMA device
spi: orion: fix incorrect handling of cell-index DT property
spi: orion: Fix error return code in orion_spi_probe()
spi/rockchip: fix error return code in rockchip_spi_probe()
spi/rockchip: remove redundant dev_err call in rockchip_spi_probe()
spi/rockchip: remove duplicated include from spi-rockchip.c
ARM: dts: fix the chip select gpios definition in the SPI nodes
spi: s3c64xx: Update binding documentation
spi: s3c64xx: use the generic SPI "cs-gpios" property
spi: s3c64xx: Revert "spi: s3c64xx: Added provision for dedicated cs pin"
spi: atmel: Use dmaengine_prep_slave_sg() API
spi: topcliff-pch: Update error messages for dmaengine_prep_slave_sg() API
spi: sh-msiof: Use correct device for DMA mapping with IOMMU
spi: sh-msiof: Handle dmaengine_prep_slave_single() failures gracefully
spi: rspi: Handle dmaengine_prep_slave_sg() failures gracefully
...
|
|
|
Linus Torvalds
|
dc7aafba6b |
IOMMU Updates for Linux v3.17
This time with:
* Support for the generic PCI device alias code in x86 IOMMU
drivers
* A new sysfs interface for IOMMUs
* Preparations for hotplug support in the Intel IOMMU driver
* Change the AMD IOMMUv2 driver to not hold references to core
data structures like mm_struct or task_struct. Rely on
mmu_notifers instead.
* Removal of the OMAP IOVMM interface, all users of it are
converted to DMA-API now
* Make the struct iommu_ops const everywhere
* Initial PCI support for the ARM SMMU driver
* There is now a generic device tree binding documented for
ARM IOMMUs
* Various fixes and cleanups all over the place
Also included are some changes to the OMAP code, which are acked by the
maintainer.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ChW/
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"This time with:
- support for the generic PCI device alias code in x86 IOMMU drivers
- a new sysfs interface for IOMMUs
- preparations for hotplug support in the Intel IOMMU driver
- change the AMD IOMMUv2 driver to not hold references to core data
structures like mm_struct or task_struct. Rely on mmu_notifers
instead.
- removal of the OMAP IOVMM interface, all users of it are converted
to DMA-API now
- make the struct iommu_ops const everywhere
- initial PCI support for the ARM SMMU driver
- there is now a generic device tree binding documented for ARM
IOMMUs
- various fixes and cleanups all over the place
Also included are some changes to the OMAP code, which are acked by
the maintainer"
* tag 'iommu-updates-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (67 commits)
devicetree: Add generic IOMMU device tree bindings
iommu/vt-d: Fix race setting IRQ CPU affinity while freeing IRQ
iommu/amd: Fix 2 typos in comments
iommu/amd: Fix device_state reference counting
iommu/amd: Remove change_pte mmu_notifier call-back
iommu/amd: Don't set pasid_state->mm to NULL in unbind_pasid
iommu/exynos: Select ARM_DMA_USE_IOMMU
iommu/vt-d: Exclude devices using RMRRs from IOMMU API domains
iommu/omap: Remove platform data da_start and da_end fields
ARM: omap: Don't set iommu pdata da_start and da_end fields
iommu/omap: Remove virtual memory manager
iommu/vt-d: Fix issue in computing domain's iommu_snooping flag
iommu/vt-d: Introduce helper function iova_size() to improve code readability
iommu/vt-d: Introduce helper domain_pfn_within_range() to simplify code
iommu/vt-d: Simplify intel_unmap_sg() and kill duplicated code
iommu/vt-d: Change iommu_enable/disable_translation to return void
iommu/vt-d: Simplify include/linux/dmar.h
iommu/vt-d: Avoid freeing virtual machine domain in free_dmar_iommu()
iommu/vt-d: Fix possible invalid memory access caused by free_dmar_iommu()
iommu/vt-d: Allocate dynamic domain id for virtual domains only
...
|
|
|
Linus Torvalds
|
161d2e0a19 |
Notable changes:
Heiko Schocher provided a driver for TI TMP103.
Kamil Debski provided a driver for pwm-controlled fans.
Neelesh Gupta provided a driver for power, fan rpm, voltage and temperature
reporting on powerpc/powernv systems.
Scott Kanowitz provided a driver supporting Lattice's POWR1220 power manager IC.
Richard Zhu provided a pmbus front-end driver for TPS40422.
Frans Klaver added support for TMP112 to the lm75 driver.
Johannes Pointner added support for EPCOS B57330V2103 to the ntc_thermistor
driver.
Guenter Roeck added support for TMP441 and TMP442 to the tmp421 driver.
Axel Lin converted several drivers to the new hwmon API (36 of them, if I
counted correctly), and cleaned up many of the drivers along the way.
There are also a number of patches fixing bugs discovered while testing
Axel's changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9j+M
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Notable changes:
- Heiko Schocher provided a driver for TI TMP103.
- Kamil Debski provided a driver for pwm-controlled fans.
- Neelesh Gupta provided a driver for power, fan rpm, voltage and
temperature reporting on powerpc/powernv systems.
- Scott Kanowitz provided a driver supporting Lattice's POWR1220
power manager IC.
- Richard Zhu provided a pmbus front-end driver for TPS40422.
- Frans Klaver added support for TMP112 to the lm75 driver.
- Johannes Pointner added support for EPCOS B57330V2103 to the
ntc_thermistor driver.
- Guenter Roeck added support for TMP441 and TMP442 to the tmp421
driver.
- Axel Lin converted several drivers to the new hwmon API (36 of
them, if I counted correctly), and cleaned up many of the drivers
along the way.
There are also a number of patches fixing bugs discovered while
testing Axel's changes"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (88 commits)
hwmon: (g762) Use of_property_read_u32 at appropriate place
hwmon: (sis5595) Prevent overflow problem when writing large limits
hwmon: (gpio-fan) Prevent overflow problem when writing large limits
hwmon: (ibmpowernv) Use of_property_read_u32 at appropriate place
hwmon: (lm85) Convert to devm_hwmon_device_register_with_groups
hwmon: (lm85) Avoid forward declaration
hwmon: (lm78) Convert to devm_hwmon_device_register_with_groups
hwmon: (max6697) Use of_property_read_bool at appropriate places
hwmon: (pwm-fan) Make SENSORS_PWM_FAN depend on OF
hwmon: (pwm-fan) Remove duplicate dev_set_drvdata call
hwmon: (nct6775) Remove num_attr_groups from struct nct6775_data
hwmon: (nct6775) Update module description and Kconfig for NCT6106D and NCT6791D
hwmon: (adt7411) Convert to devm_hwmon_device_register_with_groups
hwmon: (g762) Convert to hwmon_device_register_with_groups
hwmon: (emc2103) Convert to devm_hwmon_device_register_with_groups
hwmon: (smsc47m1) Avoid forward declaration
hwmon: (smsc47m192) Convert to devm_hwmon_device_register_with_groups
hwmon: (smsc47m192) Avoid forward declaration
hwmon: (max1668) Make max1668_addr_list array const
hwmon: (max6639) Make normal_i2c array const
...
|
|
|
Sangjung Woo
|
5be876cf7e |
Documentation: fix two typos in watchdog-api.txt
This patch changes 'go of' to 'go off' and 'pretimout' to 'pretimeout'. Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
|
|
Xiubo Li
|
f728f4bfc4 |
watchdog: imx2_wdt: adds big endianness support.
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+
platforms, and will be in different endianness mode in those SoCs:
SoCs WDT endian mode
------------------------------------
IMX2+ LE
Vybird LE
LS1 BE
LS2 LE
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
|
David S. Miller
|
aef4f5b6db |
Merge tag 'master-2014-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
Conflicts: net/6lowpan/iphc.c Minor conflicts in iphc.c were changes overlapping with some style cleanups. John W. Linville says: ==================== Please pull this last(?) batch of wireless change intended for the 3.17 stream... For the NFC bits, Samuel says: "This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital laye" For the Atheros bits, Kalle says: "Michal and Janusz did some important RX aggregation fixes, basically we were missing RX reordering altogether. The 10.1 firmware doesn't support Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc support with that firmware. Also he implemented a workaround for a KVM issue." For the Bluetooth bits, Gustavo and Johan say: "To quote Gustavo from his previous request: 'Some last minute fixes for -next. We have a fix for a use after free in RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with auto-connection handling. Last, we added support for reading the codec and MWS setting for controllers that support these features.' Additionally there are fixes to LE scanning, an update to conform to the 4.1 core specification as well as fixes for tracking the page scan state. All of these fixes are important for 3.17." And, "We've got: - 6lowpan fixes/cleanups - A couple crash fixes, one for the Marvell HCI driver and another in LE SMP. - Fix for an incorrect connected state check - Fix for the bondable requirement during pairing (an issue which had crept in because of using "pairable" when in fact the actual meaning was "bondable" (these have different meanings in Bluetooth)" Along with those are some late-breaking hardware support patches in brcmfmac and b43 as well as a stray ath9k patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Mark Brown
|
ed4bf4f5e3 | Merge remote-tracking branches 'regulator/topic/tps65217', 'regulator/topic/tps65218', 'regulator/topic/tps6586x' and 'regulator/topic/twl' into regulator-next | |
|
Mark Brown
|
d5b5d9d43b | Merge remote-tracking branches 'regulator/topic/lp8755', 'regulator/topic/ltc3589', 'regulator/topic/max8952', 'regulator/topic/mc13xxx' and 'regulator/topic/palmas' into regulator-next | |
|
Mark Brown
|
a627506a01 | Merge remote-tracking branches 'regulator/topic/da9211', 'regulator/topic/getreg', 'regulator/topic/gpio' and 'regulator/topic/lp872x' into regulator-next | |
|
Mark Brown
|
862f9f840d | Merge remote-tracking branches 'regulator/topic/88pm800', 'regulator/topic/ab8500', 'regulator/topic/act8865', 'regulator/topic/as3722' and 'regulator/topic/bcm590xx' into regulator-next | |
|
Beniamino Galvani
|
0b8eebc02a |
regulator: act8865: add act8846 to DT binding documentation
This patch adds a new "active-semi,act8846" compatible string and a list of supported regulator names to the devicetree binding documentation for Active-Semi PMUs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org> |
|
|
Yann Droneaud
|
aa8dbeee5e |
Documentation: headers_install.txt is part of kbuild
'headers_install.txt' from Documentation/make/ is related to Kbuild so it must be moved in Documentation/kbuild/ directory. As Documentation/make/ directory has only one file, it will be removed as a consequence of moving 'headers_install.txt'. Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Rob Landley <rob@landley.net> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz> |
|
|
Paolo Bonzini
|
cc568ead3c |
Patch queue for ppc - 2014-08-01
Highlights in this release include:
- BookE: Rework instruction fetch, not racy anymore now
- BookE HV: Fix ONE_REG accessors for some in-hardware registers
- Book3S: Good number of LE host fixes, enable HV on LE
- Book3S: Some misc bug fixes
- Book3S HV: Add in-guest debug support
- Book3S HV: Preload cache lines on context switch
- Remove 440 support
Alexander Graf (31):
KVM: PPC: Book3s PR: Disable AIL mode with OPAL
KVM: PPC: Book3s HV: Fix tlbie compile error
KVM: PPC: Book3S PR: Handle hyp doorbell exits
KVM: PPC: Book3S PR: Fix ABIv2 on LE
KVM: PPC: Book3S PR: Fix sparse endian checks
PPC: Add asm helpers for BE 32bit load/store
KVM: PPC: Book3S HV: Make HTAB code LE host aware
KVM: PPC: Book3S HV: Access guest VPA in BE
KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE
KVM: PPC: Book3S HV: Access XICS in BE
KVM: PPC: Book3S HV: Fix ABIv2 on LE
KVM: PPC: Book3S HV: Enable for little endian hosts
KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct
KVM: PPC: Deflect page write faults properly in kvmppc_st
KVM: PPC: Book3S: Stop PTE lookup on write errors
KVM: PPC: Book3S: Add hack for split real mode
KVM: PPC: Book3S: Make magic page properly 4k mappable
KVM: PPC: Remove 440 support
KVM: Rename and add argument to check_extension
KVM: Allow KVM_CHECK_EXTENSION on the vm fd
KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode
KVM: PPC: Implement kvmppc_xlate for all targets
KVM: PPC: Move kvmppc_ld/st to common code
KVM: PPC: Remove kvmppc_bad_hva()
KVM: PPC: Use kvm_read_guest in kvmppc_ld
KVM: PPC: Handle magic page in kvmppc_ld/st
KVM: PPC: Separate loadstore emulation from priv emulation
KVM: PPC: Expose helper functions for data/inst faults
KVM: PPC: Remove DCR handling
KVM: PPC: HV: Remove generic instruction emulation
KVM: PPC: PR: Handle FSCR feature deselects
Alexey Kardashevskiy (1):
KVM: PPC: Book3S: Fix LPCR one_reg interface
Aneesh Kumar K.V (4):
KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation
KVM: PPC: BOOK3S: PR: Emulate virtual timebase register
KVM: PPC: BOOK3S: PR: Emulate instruction counter
KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page
Anton Blanchard (2):
KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue
KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()
Bharat Bhushan (10):
kvm: ppc: bookehv: Added wrapper macros for shadow registers
kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1
kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR
kvm: ppc: booke: Add shared struct helpers of SPRN_ESR
kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7
kvm: ppc: Add SPRN_EPR get helper function
kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit
KVM: PPC: Booke-hv: Add one reg interface for SPRG9
KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer
KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr
Michael Neuling (1):
KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling
Mihai Caraman (8):
KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule
KVM: PPC: e500: Fix default tlb for victim hint
KVM: PPC: e500: Emulate power management control SPR
KVM: PPC: e500mc: Revert "add load inst fixup"
KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1
KVM: PPC: Book3s: Remove kvmppc_read_inst() function
KVM: PPC: Allow kvmppc_get_last_inst() to fail
KVM: PPC: Bookehv: Get vcpu's last instruction for emulation
Paul Mackerras (4):
KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling
KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled
KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call
KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication
Stewart Smith (2):
Split out struct kvmppc_vcore creation to separate function
Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=JuLr
-----END PGP SIGNATURE-----
Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvm
Patch queue for ppc - 2014-08-01
Highlights in this release include:
- BookE: Rework instruction fetch, not racy anymore now
- BookE HV: Fix ONE_REG accessors for some in-hardware registers
- Book3S: Good number of LE host fixes, enable HV on LE
- Book3S: Some misc bug fixes
- Book3S HV: Add in-guest debug support
- Book3S HV: Preload cache lines on context switch
- Remove 440 support
Alexander Graf (31):
KVM: PPC: Book3s PR: Disable AIL mode with OPAL
KVM: PPC: Book3s HV: Fix tlbie compile error
KVM: PPC: Book3S PR: Handle hyp doorbell exits
KVM: PPC: Book3S PR: Fix ABIv2 on LE
KVM: PPC: Book3S PR: Fix sparse endian checks
PPC: Add asm helpers for BE 32bit load/store
KVM: PPC: Book3S HV: Make HTAB code LE host aware
KVM: PPC: Book3S HV: Access guest VPA in BE
KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE
KVM: PPC: Book3S HV: Access XICS in BE
KVM: PPC: Book3S HV: Fix ABIv2 on LE
KVM: PPC: Book3S HV: Enable for little endian hosts
KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct
KVM: PPC: Deflect page write faults properly in kvmppc_st
KVM: PPC: Book3S: Stop PTE lookup on write errors
KVM: PPC: Book3S: Add hack for split real mode
KVM: PPC: Book3S: Make magic page properly 4k mappable
KVM: PPC: Remove 440 support
KVM: Rename and add argument to check_extension
KVM: Allow KVM_CHECK_EXTENSION on the vm fd
KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode
KVM: PPC: Implement kvmppc_xlate for all targets
KVM: PPC: Move kvmppc_ld/st to common code
KVM: PPC: Remove kvmppc_bad_hva()
KVM: PPC: Use kvm_read_guest in kvmppc_ld
KVM: PPC: Handle magic page in kvmppc_ld/st
KVM: PPC: Separate loadstore emulation from priv emulation
KVM: PPC: Expose helper functions for data/inst faults
KVM: PPC: Remove DCR handling
KVM: PPC: HV: Remove generic instruction emulation
KVM: PPC: PR: Handle FSCR feature deselects
Alexey Kardashevskiy (1):
KVM: PPC: Book3S: Fix LPCR one_reg interface
Aneesh Kumar K.V (4):
KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation
KVM: PPC: BOOK3S: PR: Emulate virtual timebase register
KVM: PPC: BOOK3S: PR: Emulate instruction counter
KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page
Anton Blanchard (2):
KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue
KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()
Bharat Bhushan (10):
kvm: ppc: bookehv: Added wrapper macros for shadow registers
kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1
kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR
kvm: ppc: booke: Add shared struct helpers of SPRN_ESR
kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7
kvm: ppc: Add SPRN_EPR get helper function
kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit
KVM: PPC: Booke-hv: Add one reg interface for SPRG9
KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer
KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr
Michael Neuling (1):
KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling
Mihai Caraman (8):
KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule
KVM: PPC: e500: Fix default tlb for victim hint
KVM: PPC: e500: Emulate power management control SPR
KVM: PPC: e500mc: Revert "add load inst fixup"
KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1
KVM: PPC: Book3s: Remove kvmppc_read_inst() function
KVM: PPC: Allow kvmppc_get_last_inst() to fail
KVM: PPC: Bookehv: Get vcpu's last instruction for emulation
Paul Mackerras (4):
KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling
KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled
KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call
KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication
Stewart Smith (2):
Split out struct kvmppc_vcore creation to separate function
Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8
Conflicts:
Documentation/virtual/kvm/api.txt
|
|
|
Paolo Bonzini
|
5d57686605 |
KVM/ARM New features for 3.17 include:
- Fixes and code refactoring for stage2 kvm MMU unmap_range - Support unmapping IPAs on deleting memslots for arm and arm64 - Support MMIO mappings in stage2 faults - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) - Detect non page-aligned GICV regions and bail out (plugs guest-can-crash host bug) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJT3oZTAAoJEEtpOizt6ddyKQIH/1Bj/cZYSkkSf3IJfQhHRbWN jS37IBsvcHwjHkRJxCNmQuKP/Ho5XEusluPGrVY25PAgBMl+ouPqAuKzUk+GEab6 snjJjDFqw0zs0x0h3tg6UwfZdF+eyyIkmFGn8/IATD5P3PPd8kWBVtYnSnZmYK+R KJNVcp6RPDrt9kvUDY8Ln9fW99Jl+7CdgQAnc3QkHcXUlanLyrfq+fE1lSzyrbhZ ETzyMFAX4kCdc8tflgyyBS4A7+RvfQ6ZIQummxoAMFHIoSk90dtK7ovX68rd9U3e yL+mpe130+dTIFpUMbxCnIdE7C0eud3vcgXC6MuWtFjUrxQoaEgsVE+ffGC5tX0= =axkp -----END PGP SIGNATURE----- Merge tag 'kvm-arm-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm KVM/ARM New features for 3.17 include: - Fixes and code refactoring for stage2 kvm MMU unmap_range - Support unmapping IPAs on deleting memslots for arm and arm64 - Support MMIO mappings in stage2 faults - KVM VGIC v2 emulation on GICv3 hardware - Big-Endian support for arm/arm64 (guest and host) - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list) Conflicts: virt/kvm/arm/vgic.c [last minute cherry-pick from 3.17 to 3.16] |
|
|
Gavin Shan
|
1b69be5e8a |
drivers/vfio: EEH support for VFIO PCI device
The patch adds new IOCTL commands for sPAPR VFIO container device to support EEH functionality for PCI devices, which have been passed through from host to somebody else via VFIO. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> |
|
|
Linus Torvalds
|
b54ecfb702 |
Merge tag 'for-f2fs-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim: "This series includes patches to: - add nobarrier mount option - support tmpfile and rename2 - enhance the fdatasync behavior - fix the error path - fix the recovery routine - refactor a part of the checkpoint procedure - reduce some lock contentions" * tag 'for-f2fs-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits) f2fs: use for_each_set_bit to simplify the code f2fs: add f2fs_balance_fs for expand_inode_data f2fs: invalidate xattr node page when evict inode f2fs: avoid skipping recover_inline_xattr after recover_inline_data f2fs: add tracepoint for f2fs_direct_IO f2fs: reduce competition among node page writes f2fs: fix coding style f2fs: remove redundant lines in allocate_data_block f2fs: add tracepoint for f2fs_issue_flush f2fs: avoid retrying wrong recovery routine when error was occurred f2fs: test before set/clear bits f2fs: fix wrong condition for unlikely f2fs: enable in-place-update for fdatasync f2fs: skip unnecessary data writes during fsync f2fs: add info of appended or updated data writes f2fs: use radix_tree for ino management f2fs: add infra for ino management f2fs: punch the core function for inode management f2fs: add nobarrier mount option f2fs: fix to put root inode in error path of fill_super ... |
|
|
Linus Torvalds
|
ae9b475ebe |
USB patches for 3.17-rc1
Here is the big USB driver update for 3.17-rc1. Loads of gadget driver changes in here, including some big file movements to make things easier to manage over time. There's also the usual xhci and uas driver updates, and a handful of other changes in here. The changelog has the full details. All of these have been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlPf2ZIACgkQMUfUDdst+ylvQwCfQKPKcwhtq4vJ2imUzJROEZwN ygYAnRpFpH/19X59uGSdE7DAdhbitqKg =uPh1 -----END PGP SIGNATURE----- Merge tag 'usb-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB driver update for 3.17-rc1. Loads of gadget driver changes in here, including some big file movements to make things easier to manage over time. There's also the usual xhci and uas driver updates, and a handful of other changes in here. The changelog has the full details. All of these have been in linux-next for a while" * tag 'usb-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (211 commits) USB: devio: fix issue with log flooding uas: Log a warning when we cannot use uas because the hcd lacks streams uas: Only complain about missing sg if all other checks succeed xhci: Add missing checks for xhci_alloc_command failure xhci: Rename Asrock P67 pci product-id to EJ168 xhci: Blacklist using streams on the Etron EJ168 controller uas: Limit qdepth to 32 when connected over usb-2 uwb/whci: use correct structure type name in sizeof usb-core bInterval quirk USB: serial: ftdi_sio: Add support for new Xsens devices USB: serial: ftdi_sio: Annotate the current Xsens PID assignments usb: chipidea: debug: fix sparse non static symbol warnings usb: ci_hdrc_imx doc: fsl,usbphy is required usb: ci_hdrc_imx: Return -EINVAL for missing USB PHY usb: core: allow zero packet flag for interrupt urbs usb: lvstest: Fix sparse warnings generated by kbuild test bot USB: core: hcd-pci: free IRQ before disabling PCI device when shutting down phy: miphy365x: Represent each PHY channel as a DT subnode phy: miphy365x: Provide support for the MiPHY356x Generic PHY phy: miphy365x: Add Device Tree bindings for the MiPHY365x ... |
|
|
Linus Torvalds
|
79eb238c76 |
TTY / Serial driver update for 3.17-rc1
Here's the big tty / serial driver update for 3.17-rc1. Nothing major, just a number of fixes and new features for different serial drivers, and some more tty core fixes and documentation of the tty locks. All of these have been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlPf2C4ACgkQMUfUDdst+yllVgCgtZl/Mcr/LlxPgjsg2C1AE7nX YJ4An3o4N112bkdGqhZ7RjAE6K/8YILx =rPhE -----END PGP SIGNATURE----- Merge tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver update from Greg KH: "Here's the big tty / serial driver update for 3.17-rc1. Nothing major, just a number of fixes and new features for different serial drivers, and some more tty core fixes and documentation of the tty locks. All of these have been in linux-next for a while" * tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (82 commits) tty/n_gsm.c: fix a memory leak in gsmld_open pch_uart: don't hardcode PCI slot to get DMA device tty: n_gsm, use setup_timer Revert "ARC: [arcfpga] stdout-path now suffices for earlycon/console" serial: sc16is7xx: Correct initialization of s->clk serial: 8250_dw: Add support for deferred probing serial: 8250_dw: Add optional reset control support serial: st-asc: Fix overflow in baudrate calculation serial: st-asc: Don't call BUG in asc_console_setup() tty: serial: msm: Make of_device_id array const tty/n_gsm.c: get gsm->num after gsm_activate_mux serial/core: Fix too big allocation for attribute member drivers/tty/serial: use correct type for dma_map/unmap serial: altera_jtaguart: Fix putchar function passed to uart_console_write() serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers Serial: allow port drivers to have a default attribute group tty: kgdb_nmi: Automatically manage tty enable serial: altera_jtaguart: Adpot uart_console_write() serial: samsung: improve code clarity by defining a variable serial: samsung: correct the case and default order in switch ... |
|
|
Linus Torvalds
|
53ee983378 |
Staging driver patches for 3.17-rc1
Here's the big pull request for the staging driver tree for 3.17-rc1. Lots of things in here, over 2000 patches, but the best part is this: 1480 files changed, 39070 insertions(+), 254659 deletions(-) Thanks to the great work of Kristina Martšenko, 14 different staging drivers have been removed from the tree as they were obsolete and no one was willing to work on cleaning them up. Other than the driver removals, loads of cleanups are in here (comedi, lustre, etc.) as well as the usual IIO driver updates and additions. All of this has been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlPf1wYACgkQMUfUDdst+ykrNwCgswPkRSAPQ3C8WvLhzUYRZZ/L AqEAoJP0Q8Fz8unXjlSMcx7pgcqUaJ8G =mrTQ -----END PGP SIGNATURE----- Merge tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big pull request for the staging driver tree for 3.17-rc1. Lots of things in here, over 2000 patches, but the best part is this: 1480 files changed, 39070 insertions(+), 254659 deletions(-) Thanks to the great work of Kristina Martšenko, 14 different staging drivers have been removed from the tree as they were obsolete and no one was willing to work on cleaning them up. Other than the driver removals, loads of cleanups are in here (comedi, lustre, etc.) as well as the usual IIO driver updates and additions. All of this has been in the linux-next tree for a while" * tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2199 commits) staging: comedi: addi_apci_1564: remove diagnostic interrupt support code staging: comedi: addi_apci_1564: add subdevice to check diagnostic status staging: wlan-ng: coding style problem fix staging: wlan-ng: fixing coding style problems staging: comedi: ii_pci20kc: request and ioremap memory staging: lustre: bitwise vs logical typo staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.h staging: dgnc: rephrase comment staging: comedi: ni_tio: remove some dead code staging: rtl8723au: Fix static symbol sparse warning staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc' staging: rtl8723au: Do not duplicate kernel provided USB macros staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdown staging: rtl8723au: Remove two never set variables staging: rtl8723au: RSSI_test is never set staging:r8190: coding style: Fixed checkpatch reported Error staging:r8180: coding style: Fixed too long lines staging:r8180: coding style: Fixed commenting style staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space buffer staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space buffer ... |
|
|
Linus Torvalds
|
29b88e23a9 |
Driver core patches for 3.17-rc1
Here's the big driver-core pull request for 3.17-rc1. Largest thing in here is the dma-buf rework and fence code, that touched many different subsystems so it was agreed it should go through this tree to handle merge issues. There's also some firmware loading updates, as well as tests added, and a few other tiny changes, the changelog has the details. All have been in linux-next for a long time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlPf1XcACgkQMUfUDdst+ylREACdHLXBa02yLrRzbrONJ+nARuFv JuQAoMN49PD8K9iMQpXqKBvZBsu+iCIY =w8OJ -----END PGP SIGNATURE----- Merge tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver-core pull request for 3.17-rc1. Largest thing in here is the dma-buf rework and fence code, that touched many different subsystems so it was agreed it should go through this tree to handle merge issues. There's also some firmware loading updates, as well as tests added, and a few other tiny changes, the changelog has the details. All have been in linux-next for a long time" * tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) ARM: imx: Remove references to platform_bus in mxc code firmware loader: Fix _request_firmware_load() return val for fw load abort platform: Remove most references to platform_bus device test: add firmware_class loader test doc: fix minor typos in firmware_class README staging: android: Cleanup style issues Documentation: devres: Sort managed interfaces Documentation: devres: Add devm_kmalloc() et al fs: debugfs: remove trailing whitespace kernfs: kernel-doc warning fix debugfs: Fix corrupted loop in debugfs_remove_recursive stable_kernel_rules: Add pointer to netdev-FAQ for network patches driver core: platform: add device binding path 'driver_override' driver core/platform: remove unused implicit padding in platform_object firmware loader: inform direct failure when udev loader is disabled firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN firmware: read firmware size using i_size_read() firmware loader: allow disabling of udev as firmware loader reservation: add suppport for read-only access using rcu reservation: update api and add some helpers ... Conflicts: drivers/base/platform.c |
|
|
Linus Torvalds
|
2521129a6d |
Char / Misc driver patches for 3.17-rc1
Here's the big driver misc / char pull request for 3.17-rc1. Lots of things in here, the thunderbolt support for Apple laptops, some other new drivers, testing fixes, and other good things. All have been in linux-next for a long time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlPf1LcACgkQMUfUDdst+ymaVwCgqMrKFmpduBufOSFROhxlfB5Q ajsAoNDmIn3pgla+kj23Y5ib20aMi++s =IdIr -----END PGP SIGNATURE----- Merge tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver patches from Greg KH: "Here's the big driver misc / char pull request for 3.17-rc1. Lots of things in here, the thunderbolt support for Apple laptops, some other new drivers, testing fixes, and other good things. All have been in linux-next for a long time" * tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits) misc: bh1780: Introduce the use of devm_kzalloc Lattice ECP3 FPGA: Correct endianness drivers/misc/ti-st: Load firmware from ti-connectivity directory. dt-bindings: extcon: Add support for SM5502 MUIC device extcon: sm5502: Change internal hardware switch according to cable type extcon: sm5502: Detect cable state after completing platform booting extcon: sm5502: Add support new SM5502 extcon device driver extcon: arizona: Get MICVDD against extcon device extcon: Remove unnecessary OOM messages misc: vexpress: Fix sparse non static symbol warnings mei: drop unused hw dependent fw status functions misc: bh1770glc: Use managed functions pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage misc: remove DEFINE_PCI_DEVICE_TABLE usage ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use drivers/char/dsp56k.c: drop check for negativity of unsigned parameter mei: fix return value on disconnect timeout mei: don't schedule suspend in pm idle mei: start disconnect request timer consistently mei: reset client connection state on timeout ... |
|
|
Linus Torvalds
|
8556d44fee |
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle are: - Intel SOC driver updates, by Aubrey Li. - TS5500 platform updates, by Vivien Didelot" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pmc_atom: Silence shift wrapping warnings in pmc_sleep_tmr_show() x86/pmc_atom: Expose PMC device state and platform sleep state x86/pmc_atom: Eisable a few S0ix wake up events for S0ix residency x86/platform: New Intel Atom SOC power management controller driver x86/platform/ts5500: Add support for TS-5400 boards x86/platform/ts5500: Add a 'name' sysfs attribute x86/platform/ts5500: Use the DEVICE_ATTR_RO() macro |
|
|
Linus Torvalds
|
ce47479632 |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm changes from Ingo Molnar: "The main change in this cycle is the rework of the TLB range flushing code, to simplify, fix and consolidate the code. By Dave Hansen" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Set TLB flush tunable to sane value (33) x86/mm: New tunable for single vs full TLB flush x86/mm: Add tracepoints for TLB flushes x86/mm: Unify remote INVLPG code x86/mm: Fix missed global TLB flush stat x86/mm: Rip out complicated, out-of-date, buggy TLB flushing x86/mm: Clean up the TLB flushing code x86/smep: Be more informative when signalling an SMEP fault |
|
|
Dave Airlie
|
96b1b97110 |
Merge branch 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next
This series of patches add the support of DRM/KMS drivers for STMicroelectronics chipsets stih416 and stih407. Hardware is split in two main blocks: Compositor and TVout. Each of them includes specific hardware IPs and the display timing are controlled by a specific Video Timing Generator hardware IP (VTG). Compositor is made of the follow hardware IPs: - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB) buffers - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers - HQVDP (High Quality Video Display Processor) that supports scaling, deinterlacing and some miscellaneous image quality improvements. It fetches the Video decoded buffers from memory, processes them and pushes them to the Compositor through a HW dedicated bus. - Mixer is responsible of mixing all the entries depending of their respective z-order and layout TVout is divided in 3 parts: - HDMI to generate HDMI signals, depending of chipset version HDMI phy can change. - HDA to generate signals for HD analog TV - VIP to control/switch data path coming from Compositor On stih416 compositor and Tvout are on different dies so a Video Trafic Advance inter-die Communication mechanism (VTAC) is needed. +---------------------------------------------+ +----------------------------------------+ | +-------------------------------+ +----+ | | +----+ +--------------------------+ | | | | | | | | | | | +---------+ +----+ | | | | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | | | | | | | +----+ | | | | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | | | | | | | | | | | | | | | | +----+ | | | | | | | | | | | | | | | |---->|HDA | | | | | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | | | | | | | | | | | | | | | | Compositor | | | | | | | | TVout | | | +-------------------------------+ | | | | | | +--------------------------+ | | ^ | | | | | | ^ | | | | | | | | | | | | +--------------+ | | | | | | +-------------+ | | | VTG (master) |----->| | | | | |----->| VTG (slave) | | | +--------------+ +----+ | | +----+ +-------------+ | |Digital die | | Analog Die| +---------------------------------------------+ +----------------------------------------+ On stih407 Compositor and Tvout are on the same die +-----------------------------------------------------------------+ | +-------------------------------+ +--------------------------+ | | | | | +---------+ +----+ | | | | +----+ +------+ | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | +----+ | | | | +----+ |Mixer |--|--|->| switcher| | | | | +----+ +-----+ | | | | | | +----+ | | | | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | | | | +----+ +-----+ +------+ | | +---------+ +----+ | | | | | | | | | | Compositor | | TVout | | | +-------------------------------+ +--------------------------+ | | ^ ^ | | | | | | +--------------+ | | | VTG | | | +--------------+ | |Digital die | +-----------------------------------------------------------------+ In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used by HDMI driver to retrieve EDID for monitor. To unify interfaces of GDP and VDP we create a "layer" interface called by compositor to control both GPD and VDP. Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions to allocate frame buffer. File naming convention is: - sti_* for IPs drivers - sti_drm_* for drm functions implementation. * 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel: drm: sti: Add DRM driver itself drm: sti: add Compositor drm: sti: add Mixer drm: sti: add VID layer drm: sti: add GDP layer drm: sti: add TVOut driver drm: sti: add HDA driver drm: sti: add HDMI driver drm: sti: add VTAC drivers drm: sti: add VTG driver drm: sti: add bindings for DRM driver |
|
|
Dave Airlie
|
920f946428 |
Merge branch 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-next
This builds upon the previous set of fixes which were pulled on 6th July. Included in this set are: - an update from Jean-Francois to add the missing reg documentation entry to the device tree documentation. - conversion of the tda998x driver to the component helpers. * 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: add component support drm/i2c: tda998x: allow re-use of tda998x support code drm/i2c: tda998x: fix lack of required reg in DT documentation Conflicts: drivers/gpu/drm/i2c/tda998x_drv.c |
|
|
Linus Torvalds
|
98959948a7 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar: - Move the nohz kick code out of the scheduler tick to a dedicated IPI, from Frederic Weisbecker. This necessiated quite some background infrastructure rework, including: * Clean up some irq-work internals * Implement remote irq-work * Implement nohz kick on top of remote irq-work * Move full dynticks timer enqueue notification to new kick * Move multi-task notification to new kick * Remove unecessary barriers on multi-task notification - Remove proliferation of wait_on_bit() action functions and allow wait_on_bit_action() functions to support a timeout. (Neil Brown) - Another round of sched/numa improvements, cleanups and fixes. (Rik van Riel) - Implement fast idling of CPUs when the system is partially loaded, for better scalability. (Tim Chen) - Restructure and fix the CPU hotplug handling code that may leave cfs_rq and rt_rq's throttled when tasks are migrated away from a dead cpu. (Kirill Tkhai) - Robustify the sched topology setup code. (Peterz Zijlstra) - Improve sched_feat() handling wrt. static_keys (Jason Baron) - Misc fixes. * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) sched/fair: Fix 'make xmldocs' warning caused by missing description sched: Use macro for magic number of -1 for setparam sched: Robustify topology setup sched: Fix sched_setparam() policy == -1 logic sched: Allow wait_on_bit_action() functions to support a timeout sched: Remove proliferation of wait_on_bit() action functions sched/numa: Revert "Use effective_load() to balance NUMA loads" sched: Fix static_key race with sched_feat() sched: Remove extra static_key*() function indirection sched/rt: Fix replenish_dl_entity() comments to match the current upstream code sched: Transform resched_task() into resched_curr() sched/deadline: Kill task_struct->pi_top_task sched: Rework check_for_tasks() sched/rt: Enqueue just unthrottled rt_rq back on the stack in __disable_runtime() sched/fair: Disable runtime_enabled on dying rq sched/numa: Change scan period code to match intent sched/numa: Rework best node setting in task_numa_migrate() sched/numa: Examine a task move when examining a task swap sched/numa: Simplify task_numa_compare() sched/numa: Use effective_load() to balance NUMA loads ... |
|
|
Dave Airlie
|
eceb55a0ec |
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
This time around we have a mix of new hw enablement (mdp5 v1.3 / apq8084), plus devicetree and various upstream changes (mostly adapting to CCF vs downstream clk driver differences) for mdp4 / apq8064. With these drm/msm patches plus a few other small patchsets (from linaro qcom integration branch.. mostly stuff queued up for 3.17) we have the inforce ifc6410 board working, with gpu. Much nicer to work with than ancient vendor android branch :-) * 'msm-next' of git://people.freedesktop.org/~robclark/linux: drm/msm/hdmi: fix HDMI_MUX_EN gpio request typo drm/msm/hdmi: enable lpm-mux if it is present drm/msm/mdp5: add support for MDP5 v1.3 drm/msm: fix potential deadlock in gpu init drm/msm: use upstream iommu drm/msm: no mmu is only error if not using vram carveout drm/msm: fix BUG_ON() in error cleanup path drm/msm/mdp4: add mdp axi clk drm/msm: hdmi phy 8960 phy pll drm/msm: update generated headers drm/msm: DT support for 8960/8064 (v3) drm/msm: Implement msm drm fb_mmap callback function drm/msm: activate iommu support drm/msm: fix double struct_mutex acquire |
|
|
Dave Airlie
|
5d42f82a9b |
Linux 3.16
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJT3rbVAAoJEHm+PkMAQRiGBc0H/0PcAqZ66KqBrjCaC7tlR9ZJ Oyv4usrPpVmJaCaYiNwc4KnkJXDfc/foEtZq32vYSb4d8xaOLta3DrT8YJTS7B7T Afdg8FbVdSjBD0S8It35XidmZlOaVrgGJGpDIRBRrqDwPPgbWpTeUR73bfkwoA/R ziW+78s0mquo9hN9Bdu3apr7XxVmzeIUx6lJxKPCoXNEGTsSC7ibCzZRzZDMpag/ D1JrQbE0XevgEu5fWrJkcqKceUzi3I1wuKZvBIJm2aX5XDsKpYNfQL6ViJDW56dK LhrB8vex8gkQYSCVPyUKx4BjkdPourSICSKq+h0SwhOCpHVHPmG8XM3J4/U4a7U= =yoNZ -----END PGP SIGNATURE----- Merge tag 'v3.16' into drm-next Linux 3.16 backmerge requested by i915, nouveau and radeon authors Conflicts: drivers/gpu/drm/i915/i915_gem_render_state.c drivers/gpu/drm/i915/intel_drv.h |
|
|
Linus Torvalds
|
5bda4f638f |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molar: "The main changes: - torture-test updates - callback-offloading changes - maintainership changes - update RCU documentation - miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) rcu: Allow for NULL tick_nohz_full_mask when nohz_full= missing rcu: Fix a sparse warning in rcu_report_unblock_qs_rnp() rcu: Fix a sparse warning in rcu_initiate_boost() rcu: Fix __rcu_reclaim() to use true/false for bool rcu: Remove CONFIG_PROVE_RCU_DELAY rcu: Use __this_cpu_read() instead of per_cpu_ptr() rcu: Don't use NMIs to dump other CPUs' stacks rcu: Bind grace-period kthreads to non-NO_HZ_FULL CPUs rcu: Simplify priority boosting by putting rt_mutex in rcu_node rcu: Check both root and current rcu_node when setting up future grace period rcu: Allow post-unlock reference for rt_mutex rcu: Loosen __call_rcu()'s rcu_head alignment constraint rcu: Eliminate read-modify-write ACCESS_ONCE() calls rcu: Remove redundant ACCESS_ONCE() from tick_do_timer_cpu rcu: Make rcu node arrays static const char * const signal: Explain local_irq_save() call rcu: Handle obsolete references to TINY_PREEMPT_RCU rcu: Document deadlock-avoidance information for rcu_read_unlock() scripts: Teach get_maintainer.pl about the new "R:" tag rcu: Update rcu torture maintainership filename patterns ... |
|
|
Linus Torvalds
|
5167d09ffa |
arm64 updates for 3.17
Changes include:
- Context tracking support (NO_HZ_FULL) which narrowly missed 3.16
- vDSO layout rework following Andy's work on x86
- TEXT_OFFSET fuzzing for bootloader testing
- /proc/cpuinfo tidy-up
- Preliminary work to support 48-bit virtual addresses, but this is
currently disabled until KVM has been ported to use it (the patches
do, however, bring some nice clean-up)
- Boot-time CPU sanity checks (especially useful on heterogenous
systems)
- Support for syscall auditing
- Support for CC_STACKPROTECTOR
- defconfig updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6XMc
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Once again, Catalin's off on holiday and I'm looking after the arm64
tree. Please can you pull the following arm64 updates for 3.17?
Note that this branch also includes the new GICv3 driver (merged via a
stable tag from Jason's irqchip tree), since there is a fix for older
binutils on top.
Changes include:
- context tracking support (NO_HZ_FULL) which narrowly missed 3.16
- vDSO layout rework following Andy's work on x86
- TEXT_OFFSET fuzzing for bootloader testing
- /proc/cpuinfo tidy-up
- preliminary work to support 48-bit virtual addresses, but this is
currently disabled until KVM has been ported to use it (the patches
do, however, bring some nice clean-up)
- boot-time CPU sanity checks (especially useful on heterogenous
systems)
- support for syscall auditing
- support for CC_STACKPROTECTOR
- defconfig updates"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (55 commits)
arm64: add newline to I-cache policy string
Revert "arm64: dmi: Add SMBIOS/DMI support"
arm64: fpsimd: fix a typo in fpsimd_save_partial_state ENDPROC
arm64: don't call break hooks for BRK exceptions from EL0
arm64: defconfig: enable devtmpfs mount option
arm64: vdso: fix build error when switching from LE to BE
arm64: defconfig: add virtio support for running as a kvm guest
arm64: gicv3: Allow GICv3 compilation with older binutils
arm64: fix soft lockup due to large tlb flush range
arm64/crypto: fix makefile rule for aes-glue-%.o
arm64: Do not invoke audit_syscall_* functions if !CONFIG_AUDIT_SYSCALL
arm64: Fix barriers used for page table modifications
arm64: Add support for 48-bit VA space with 64KB page configuration
arm64: asm/pgtable.h pmd/pud definitions clean-up
arm64: Determine the vmalloc/vmemmap space at build time based on VA_BITS
arm64: Clean up the initial page table creation in head.S
arm64: Remove asm/pgtable-*level-types.h files
arm64: Remove asm/pgtable-*level-hwdef.h files
arm64: Convert bool ARM64_x_LEVELS to int ARM64_PGTABLE_LEVELS
arm64: mm: Implement 4 levels of translation tables
...
|
|
|
Linus Torvalds
|
8533ce7271 |
These are the x86, MIPS and s390 changes; PPC and ARM will come in a
few days. MIPS and s390 have little going on this release; just bugfixes, some small, some larger. The highlights for x86 are nested VMX improvements (Jan Kiszka), optimizations for old processor (up to Nehalem, by me and Bandan Das), and a lot of x86 emulator bugfixes (Nadav Amit). Stephen Rothwell reported a trivial conflict with the tracing branch. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJT300XAAoJEBvWZb6bTYby3V8QAJz+XyajnhJ8wH55Vxczz22L i2gtUGmBLhEXsBcaVKO4BBfek88lLzg0SGLjfW5wCMQmKtxVlrwTCXNkBoPGjapd NwHtWkMKym44PDhRovn7zkSumkxC43uFIBR/ebrhP6Bvhh9s+MnkQUxfw9ILB+YV EeKyEG8sSgxFCciuHbp3mIXpDcO6r/ldy6I7009OdyhLoMY+Kvmk7kRe9wtAivdg CGJi60QvGOn2RGRPOCEtF6UWr8Ae8fe1t84o0hkXPv/j3jtabzAatXKJa4dYNbIs 7Mp4NQpxaGV6rq3WCYVeZRxGs+UReGDAS3Il4Z8C9eTOTooSfxdVr8acpM8PY6I8 UmLT6ECLGycc4ELXrETtR+QLmiXACyJqyVxz4aiLV3kWSWfamKD3hBeQK9NizNcE VoPDl+PyISvR1tW4KstBuzfUWAEXi+gO78cqqFr/VW6cl7HKpA1DFQaPfGkYKDae 2CPwcLwI5/M6RtSgkyXTkEqNZLc2BjldqSeM1lmWjhZVW56X2iqePUL46Vab3Yvt U+sELtwEE560NLN3hbaHUsLR1tcUix5w8vTzcXPxgoHQBszHCcAZTWd1XHulr64F rp/cangqtkPKcu5j1mNhQs38oLjHI1MUsbQrqFoD4tmHjQ75iXHRFzYGoIVKXyHG AnGbQzJzBcdAANhm3LW0 =UXxV -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM changes from Paolo Bonzini: "These are the x86, MIPS and s390 changes; PPC and ARM will come in a few days. MIPS and s390 have little going on this release; just bugfixes, some small, some larger. The highlights for x86 are nested VMX improvements (Jan Kiszka), optimizations for old processor (up to Nehalem, by me and Bandan Das), and a lot of x86 emulator bugfixes (Nadav Amit). Stephen Rothwell reported a trivial conflict with the tracing branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (104 commits) x86/kvm: Resolve shadow warnings in macro expansion KVM: s390: rework broken SIGP STOP interrupt handling KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table KVM: vmx: remove duplicate vmx_mpx_supported() prototype KVM: s390: Fix memory leak on busy SIGP stop x86/kvm: Resolve shadow warning from min macro kvm: Resolve missing-field-initializers warnings Replace NR_VMX_MSR with its definition KVM: x86: Assertions to check no overrun in MSR lists KVM: x86: set rflags.rf during fault injection KVM: x86: Setting rflags.rf during rep-string emulation KVM: x86: DR6/7.RTM cannot be written KVM: nVMX: clean up nested_release_vmcs12 and code around it KVM: nVMX: fix lifetime issues for vmcs02 KVM: x86: Defining missing x86 vectors KVM: x86: emulator injects #DB when RFLAGS.RF is set KVM: x86: Cleanup of rflags.rf cleaning KVM: x86: Clear rflags.rf on emulated instructions KVM: x86: popf emulation should not change RF KVM: x86: Clearing rflags.rf upon skipped emulated instruction ... |
|
|
Linus Torvalds
|
b8c0aa46b3 |
This pull request has a lot of work done. The main thing is the changes
to the ftrace function callback infrastructure. It's introducing a way to allow different functions to call directly different trampolines instead of all calling the same "mcount" one. The only user of this for now is the function graph tracer, which always had a different trampoline, but the function tracer trampoline was called and did basically nothing, and then the function graph tracer trampoline was called. The difference now, is that the function graph tracer trampoline can be called directly if a function is only being traced by the function graph trampoline. If function tracing is also happening on the same function, the old way is still done. The accounting for this takes up more memory when function graph tracing is activated, as it needs to keep track of which functions it uses. I have a new way that wont take as much memory, but it's not ready yet for this merge window, and will have to wait for the next one. Another big change was the removal of the ftrace_start/stop() calls that were used by the suspend/resume code that stopped function tracing when entering into suspend and resume paths. The stop of ftrace was done because there was some function that would crash the system if one called smp_processor_id()! The stop/start was a big hammer to solve the issue at the time, which was when ftrace was first introduced into Linux. Now ftrace has better infrastructure to debug such issues, and I found the problem function and labeled it with "notrace" and function tracing can now safely be activated all the way down into the guts of suspend and resume. Other changes include clean ups of uprobe code. Clean up of the trace_seq() code. And other various small fixes and clean ups to ftrace and tracing. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJT35zXAAoJEKQekfcNnQGuOz0H/38zqM0nLFhrgvz3EPk2UOjn xqpX8qyb2V7TJZL+IqeXU2a5cQZl5ba0D4WtBGpxbTae3CJYiuQ87iKUNFoH0om5 FDpn80igb368k8V3qRdRsziKVCCf0XBd/NkHJXc0ZkfXGyzB2Ga4bBxALxp2gj9y bnO+vKo6+tWYKG4hyQb4P3LRXUrK8/LWEsPr39cH2QH1Rdj69Lx9CgrCdUVJmwcb Bj8hEiLXL/RYCFNn79A3wNTUvW0rG/AOIf4SLqXtasSRZ0ToaU0ZyDnrNv+0Ol47 rX8tSk+LfXchL9hpIvjCf1vlAYq3pO02favteR/jip3lx/dTjEDE4RJ9qtJzZ4Q= =fwQY -----END PGP SIGNATURE----- Merge tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This pull request has a lot of work done. The main thing is the changes to the ftrace function callback infrastructure. It's introducing a way to allow different functions to call directly different trampolines instead of all calling the same "mcount" one. The only user of this for now is the function graph tracer, which always had a different trampoline, but the function tracer trampoline was called and did basically nothing, and then the function graph tracer trampoline was called. The difference now, is that the function graph tracer trampoline can be called directly if a function is only being traced by the function graph trampoline. If function tracing is also happening on the same function, the old way is still done. The accounting for this takes up more memory when function graph tracing is activated, as it needs to keep track of which functions it uses. I have a new way that wont take as much memory, but it's not ready yet for this merge window, and will have to wait for the next one. Another big change was the removal of the ftrace_start/stop() calls that were used by the suspend/resume code that stopped function tracing when entering into suspend and resume paths. The stop of ftrace was done because there was some function that would crash the system if one called smp_processor_id()! The stop/start was a big hammer to solve the issue at the time, which was when ftrace was first introduced into Linux. Now ftrace has better infrastructure to debug such issues, and I found the problem function and labeled it with "notrace" and function tracing can now safely be activated all the way down into the guts of suspend and resume Other changes include clean ups of uprobe code, clean up of the trace_seq() code, and other various small fixes and clean ups to ftrace and tracing" * tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits) ftrace: Add warning if tramp hash does not match nr_trampolines ftrace: Fix trampoline hash update check on rec->flags ring-buffer: Use rb_page_size() instead of open coded head_page size ftrace: Rename ftrace_ops field from trampolines to nr_trampolines tracing: Convert local function_graph functions to static ftrace: Do not copy old hash when resetting tracing: let user specify tracing_thresh after selecting function_graph ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on() tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST s390/ftrace: remove check of obsolete variable function_trace_stop arm64, ftrace: Remove check of obsolete variable function_trace_stop Blackfin: ftrace: Remove check of obsolete variable function_trace_stop metag: ftrace: Remove check of obsolete variable function_trace_stop microblaze: ftrace: Remove check of obsolete variable function_trace_stop MIPS: ftrace: Remove check of obsolete variable function_trace_stop parisc: ftrace: Remove check of obsolete variable function_trace_stop sh: ftrace: Remove check of obsolete variable function_trace_stop sparc64,ftrace: Remove check of obsolete variable function_trace_stop tile: ftrace: Remove check of obsolete variable function_trace_stop ftrace: x86: Remove check of obsolete variable function_trace_stop ... |
|
|
Linus Torvalds
|
e4ca4308c0 |
The clock framework changes for 3.17 are mostly additions of new clock
drivers and fixes/enhancements to existing clock drivers. There are also
some non-critical fixes and improvements to the framework core.
Changes to the clock framework core include:
* improvements to printks on errors
* flattening the previously hierarchal structure of per-clock entries
in debugfs
* allow per-clock debugfs entries that are specific to a particular
clock driver
* configure initial clock parent and/or initial clock rate from Device
Tree
* several feature enhancements to the composite clock type
* misc fixes
New clock drivers added include:
* TI Palmas PMIC
* Allwinner A23 SoC
* Qualcomm APQ8084 and IPQ8064 SoCs
* Rockchip rk3188, rk3066 and rk3288 SoCs
* STMicroelectronics STiH407 SoC
* Cirrus Logic CLPS711X SoC
Many fixes, feature enhancements and further clock tree support for
existing clock drivers also were merged, such as Samsung's "ARMCLK down"
power saving feature for their Exynos4 & Exynos5 SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=48y9
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux
Pull clock framework updates from Mike Turquette:
"The clock framework changes for 3.17 are mostly additions of new clock
drivers and fixes/enhancements to existing clock drivers. There are
also some non-critical fixes and improvements to the framework core.
Changes to the clock framework core include:
- improvements to printks on errors
- flattening the previously hierarchal structure of per-clock entries
in debugfs
- allow per-clock debugfs entries that are specific to a particular
clock driver
- configure initial clock parent and/or initial clock rate from
Device Tree
- several feature enhancements to the composite clock type
- misc fixes
New clock drivers added include:
- TI Palmas PMIC
- Allwinner A23 SoC
- Qualcomm APQ8084 and IPQ8064 SoCs
- Rockchip rk3188, rk3066 and rk3288 SoCs
- STMicroelectronics STiH407 SoC
- Cirrus Logic CLPS711X SoC
Many fixes, feature enhancements and further clock tree support for
existing clock drivers also were merged, such as Samsung's "ARMCLK
down" power saving feature for their Exynos4 & Exynos5 SoCs"
* tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
clk: Add missing of_clk_set_defaults export
clk: checking wrong variable in __set_clk_parents()
clk: Propagate any error return from debug_init()
clk: clps711x: Add DT bindings documentation
clk: Add CLPS711X clk driver
clk: st: Use round to closest divider flag
clk: st: Update frequency tables for fs660c32 and fs432c65
clk: st: STiH407: Support for clockgenA9
clk: st: STiH407: Support for clockgenD0/D2/D3
clk: st: STiH407: Support for clockgenC0
clk: st: Add quadfs reset handling
clk: st: Add polarity bit indication
clk: st: STiH407: Support for clockgenA0
clk: st: STiH407: Support for A9 MUX Clocks
clk: st: STiH407: Support for Flexgen Clocks
clk: st: Adds Flexgen clock binding
clk: st: Remove uncessary (void *) cast
clk: st: use static const for clkgen_pll_data tables
clk: st: use static const for stm_fs tables
clk: st: Update ST clock binding documentation
...
|
|
|
Linus Torvalds
|
e17acfdc83 |
Merge branch 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata changes from Tejun Heo: "Except for a few, all the changes are for ahci platform drivers for the arm devices. Nothing too interesting or dangerous. There's one merge from libata/for-3.16-fixes to pull in dependent changes" * 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits) ata: libahci: Silence compiler warning on 64-bit Documentation: bindings: document the sub-nodes AHCI bindings ata: ahci_platform: add a generic AHCI compatible ata: libahci: allow to use multiple PHYs ata: libahci_platform: move port_map parameters into the AHCI structure ahci: imx: add missing clk_disable_unprepare() on error in imx_sata_enable() ahci_xgene: Use correct OOB tunning parameters for APM X-Gene SoC AHCI SATA Host controller driver. ahci_xgene: Fix the watermark threshold for the APM X-Gene SATA host controller driver. ahci: st: Make of_device_id array const sata_sil24: Identify which card suffered IRQ status error ahci: st: Provide DT bindings for ST's SATA implementation ata: Add support for the Tegra124 SATA controller ata: ahci_platform: Increase AHCI_MAX_CLKS to 4 of: Add NVIDIA Tegra SATA controller binding dt-bindings: ata: document ability to disable spread-spectrum clock ata: ahci_imx: add disable for spread-spectrum dt-bindings: ata: add ahci_imx electrical properties ata: ahci_imx: allow hardware parameters to be specified in DT dt-bindings: ata: create bindings for imx sata controller ata: pata_samsung_cf: removes s5pc100 related ata codes ... |
|
|
Linus Torvalds
|
47dfe4037e |
Merge branch 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
"Mostly changes to get the v2 interface ready. The core features are
mostly ready now and I think it's reasonable to expect to drop the
devel mask in one or two devel cycles at least for a subset of
controllers.
- cgroup added a controller dependency mechanism so that block cgroup
can depend on memory cgroup. This will be used to finally support
IO provisioning on the writeback traffic, which is currently being
implemented.
- The v2 interface now uses a separate table so that the interface
files for the new interface are explicitly declared in one place.
Each controller will explicitly review and add the files for the
new interface.
- cpuset is getting ready for the hierarchical behavior which is in
the similar style with other controllers so that an ancestor's
configuration change doesn't change the descendants' configurations
irreversibly and processes aren't silently migrated when a CPU or
node goes down.
All the changes are to the new interface and no behavior changed for
the multiple hierarchies"
* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (29 commits)
cpuset: fix the WARN_ON() in update_nodemasks_hier()
cgroup: initialize cgrp_dfl_root_inhibit_ss_mask from !->dfl_files test
cgroup: make CFTYPE_ONLY_ON_DFL and CFTYPE_NO_ internal to cgroup core
cgroup: distinguish the default and legacy hierarchies when handling cftypes
cgroup: replace cgroup_add_cftypes() with cgroup_add_legacy_cftypes()
cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
cgroup: split cgroup_base_files[] into cgroup_{dfl|legacy}_base_files[]
cpuset: export effective masks to userspace
cpuset: allow writing offlined masks to cpuset.cpus/mems
cpuset: enable onlined cpu/node in effective masks
cpuset: refactor cpuset_hotplug_update_tasks()
cpuset: make cs->{cpus, mems}_allowed as user-configured masks
cpuset: apply cs->effective_{cpus,mems}
cpuset: initialize top_cpuset's configured masks at mount
cpuset: use effective cpumask to build sched domains
cpuset: inherit ancestor's masks if effective_{cpus, mems} becomes empty
cpuset: update cs->effective_{cpus, mems} when config changes
cpuset: update cpuset->effective_{cpus,mems} at hotplug
cpuset: add cs->effective_cpus and cs->effective_mems
cgroup: clean up sane_behavior handling
...
|
|
|
Linus Torvalds
|
3e7a716a92 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu: - CTR(AES) optimisation on x86_64 using "by8" AVX. - arm64 support to ccp - Intel QAT crypto driver - Qualcomm crypto engine driver - x86-64 assembly optimisation for 3DES - CTR(3DES) speed test - move FIPS panic from module.c so that it only triggers on crypto modules - SP800-90A Deterministic Random Bit Generator (drbg). - more test vectors for ghash. - tweak self tests to catch partial block bugs. - misc fixes. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (94 commits) crypto: drbg - fix failure of generating multiple of 2**16 bytes crypto: ccp - Do not sign extend input data to CCP crypto: testmgr - add missing spaces to drbg error strings crypto: atmel-tdes - Switch to managed version of kzalloc crypto: atmel-sha - Switch to managed version of kzalloc crypto: testmgr - use chunks smaller than algo block size in chunk tests crypto: qat - Fixed SKU1 dev issue crypto: qat - Use hweight for bit counting crypto: qat - Updated print outputs crypto: qat - change ae_num to ae_id crypto: qat - change slice->regions to slice->region crypto: qat - use min_t macro crypto: qat - remove unnecessary parentheses crypto: qat - remove unneeded header crypto: qat - checkpatch blank lines crypto: qat - remove unnecessary return codes crypto: Resolve shadow warnings crypto: ccp - Remove "select OF" from Kconfig crypto: caam - fix DECO RSR polling crypto: qce - Let 'DEV_QCE' depend on both HAS_DMA and HAS_IOMEM ... |
|
|
Takashi Iwai
|
e9e3bdffe3 |
ASoC: Updates for v3.17
This has been a pretty exciting release in terms of the framework, we've
finally got support for multiple CODECs attached to a single DAI link
which has been something there's been interest in as long as I've been
working on ASoC. A big thanks to Benoit and Misael for their work on
this.
Otherwise it's been a fairly standard release for development, including
more componentisation work from Lars-Peter and a good selection of both
CODEC and CPU drivers.
- Support for multiple CODECs attached to a single DAI, enabling
systems with for example multiple DAC/speaker drivers on a single
link, contributed by Benoit Cousson based on work from Misael Lopez
Cruz.
- Support for byte controls larger than 256 bytes based on the use of
TLVs contributed by Omair Mohammed Abdullah.
- More componentisation work from Lars-Peter Clausen.
- The remainder of the conversions of CODEC drivers to params_width()
- Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
TAS2552.
- Lots of updates and fixes, especially to the DaVinci, Intel,
Freescale, Realtek, and rcar drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pnce
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v3.17
This has been a pretty exciting release in terms of the framework, we've
finally got support for multiple CODECs attached to a single DAI link
which has been something there's been interest in as long as I've been
working on ASoC. A big thanks to Benoit and Misael for their work on
this.
Otherwise it's been a fairly standard release for development, including
more componentisation work from Lars-Peter and a good selection of both
CODEC and CPU drivers.
- Support for multiple CODECs attached to a single DAI, enabling
systems with for example multiple DAC/speaker drivers on a single
link, contributed by Benoit Cousson based on work from Misael Lopez
Cruz.
- Support for byte controls larger than 256 bytes based on the use of
TLVs contributed by Omair Mohammed Abdullah.
- More componentisation work from Lars-Peter Clausen.
- The remainder of the conversions of CODEC drivers to params_width()
- Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
TAS2552.
- Lots of updates and fixes, especially to the DaVinci, Intel,
Freescale, Realtek, and rcar drivers.
|
|
|
Mark Brown
|
0c18b7638a | Merge remote-tracking branches 'spi/topic/orion', 'spi/topic/pl022', 'spi/topic/qup', 'spi/topic/rockchip' and 'spi/topic/rspi' into spi-next | |
|
Mark Brown
|
7e5ad716b6 | Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/efm32', 'spi/topic/fsl' and 'spi/topic/omap-uwire' into spi-next | |
|
Mark Brown
|
d1345c524e | Merge remote-tracking branches 'spi/topic/adi-v3', 'spi/topic/atmel', 'spi/topic/cleanup' and 'spi/topic/davinci' into spi-next | |
|
Mark Brown
|
8331c49c48 | Merge remote-tracking branches 'spi/fix/s3c64xx', 'spi/fix/samsung' and 'spi/fix/xilinx' into spi-linus | |
|
Rob Clark
|
41e69778c8 |
drm/msm: DT support for 8960/8064 (v3)
Now that we (almost) have enough dependencies in place (MMCC, RPM, etc), add necessary DT support so that we can use drm/msm on upstream kernel. v2: update for review comments v3: rebase on component helper changes Signed-off-by: Rob Clark <robdclark@gmail.com> |
|
|
Mark Brown
|
e99a866c4c | Merge remote-tracking branches 'asoc/topic/tlv320aic3x', 'asoc/topic/width', 'asoc/topic/wm0010', 'asoc/topic/wm8904' and 'asoc/topic/wm8962' into asoc-next | |
|
Mark Brown
|
3510a69495 | Merge remote-tracking branches 'asoc/topic/sigmadsp', 'asoc/topic/sirf', 'asoc/topic/spdif', 'asoc/topic/tas2552' and 'asoc/topic/tas5086' into asoc-next | |
|
Mark Brown
|
c1bd940afd | Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677', 'asoc/topic/s6000', 'asoc/topic/samsung' and 'asoc/topic/sh-fsi' into asoc-next | |
|
Mark Brown
|
b0ae27c477 | Merge remote-tracking branches 'asoc/topic/rl6231', 'asoc/topic/rockchip', 'asoc/topic/rt286', 'asoc/topic/rt5640' and 'asoc/topic/rt5645' into asoc-next | |
|
Mark Brown
|
a6ce305207 | Merge remote-tracking branches 'asoc/topic/intel', 'asoc/topic/kirkwood', 'asoc/topic/max98090' and 'asoc/topic/mc13783' into asoc-next | |
|
Mark Brown
|
e7177999dc | Merge remote-tracking branches 'asoc/topic/fsl', 'asoc/topic/fsl-asrc', 'asoc/topic/fsl-spdif' and 'asoc/topic/imx-audmux' into asoc-next | |
|
Mark Brown
|
01954a7b67 | Merge remote-tracking branches 'asoc/topic/cs4265', 'asoc/topic/cs42l56', 'asoc/topic/cs42xx8', 'asoc/topic/cx20442' and 'asoc/topic/davinci' into asoc-next | |
|
Mark Brown
|
a486f183da | Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/ak4642', 'asoc/topic/ak5386' and 'asoc/topic/arizona' into asoc-next | |
|
Mark Brown
|
2fd5373467 | Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next | |
|
Kamil Debski
|
d82d57767c |
hwmon: Add pwm-fan driver
The pwm-fan driver enables control of fans connected to PWM lines. This driver uses the PWM framework, so it is compatible with all PWM devices that provide drivers through the PWM framework. Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> [Guenter Roeck: Last argument to devm_of_pwm_get is pointer, use NULL] Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Neelesh Gupta
|
24c1aa8587 |
hwmon: (powerpc/powernv) hwmon driver for power, fan rpm, voltage and temperature
This patch adds basic kernel support for reading power values, fan speed rpm, voltage and temperature data on powernv platforms which will be exported to user space through sysfs interface. Test results: ------------- [root@tul163p1 ~]# sensors ibmpowernv-isa-0000 Adapter: ISA adapter fan1: 5465 RPM (min = 0 RPM) fan2: 5152 RPM (min = 0 RPM) fan3: 5521 RPM (min = 0 RPM) fan4: 4891 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) fan6: 0 RPM (min = 0 RPM) fan7: 7480 RPM (min = 0 RPM) fan8: 7944 RPM (min = 0 RPM) temp1: +39.0°C (high = +0.0°C) power1: 190.00 W [root@tul163p1 ~]# ls /sys/devices/platform/ alarmtimer ibmpowernv.0 power rtc-generic serial8250 uevent [root@tul163p1 ~]# ls /sys/devices/platform/ibmpowernv.0/hwmon/hwmon0/ device fan2_min fan4_min fan6_min fan8_min power fan1_fault fan3_fault fan5_fault fan7_fault in1_fault power1_input fan1_input fan3_input fan5_input fan7_input in2_fault subsystem fan1_min fan3_min fan5_min fan7_min in3_fault temp1_input fan2_fault fan4_fault fan6_fault fan8_fault in4_fault temp1_max fan2_input fan4_input fan6_input fan8_input name uevent [root@tul163p1 ~]# ls /sys/class/hwmon/hwmon0/ device fan2_min fan4_min fan6_min fan8_min power fan1_fault fan3_fault fan5_fault fan7_fault in1_fault power1_input fan1_input fan3_input fan5_input fan7_input in2_fault subsystem fan1_min fan3_min fan5_min fan7_min in3_fault temp1_input fan2_fault fan4_fault fan6_fault fan8_fault in4_fault temp1_max fan2_input fan4_input fan6_input fan8_input name uevent [root@tul163p1 ~]# Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Zhu, Richard \(NSN - CN/Beijing\)
|
a8bfeceb0c |
hwmon: (pmbus) Add tps40422 front-end driver
For TI power management chip TPS40422, READ_TEMPERATURE_2 command is supported on page 1 of the chip, but the original driver(pmbus.c) only tried to detect this command on page 0, this will lead to a result that the temperature sensor in page 1 couldn't be detected. This change is to isolate the tps40422 driver from pmbus.c into a solo front-end driver. Signed-off-by: Zhu Laiwen <richard.zhu@nsn.com> [Guenter Roeck: Dropped unnecessary license text (fixes checkpatch warning)] Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Guenter Roeck
|
05c77ab240 |
hwmon: (tmp421) Add support for TMP441 and TMP442
TMP441 and TMP442 are compatible to TMP421 and TMP422. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> |
|
|
Guenter Roeck
|
a63ee9d83b |
hwmon: (tmp421) Strengthen detect function
Not all supported chips support the entire I2C address range. Only accept specific chips at the addresses supported by that chip. Check for invalid values in conversion rate and status registers. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> |
|
|
Johannes Pointner
|
ed67f0872b |
hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS
This patch adds support for the ntc thermistor B57330V2103 from EPCOS. Signed-off-by: Johannes Pointner <johannes.pointner@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Johannes Pointner
|
3ef0bb6f76 |
devicetree: Add vendor prefix "epcos" to vendor-prefixes.txt
This patch adds the vendor prefix for "epcos" to the vendor-prefixes. Signed-off-by: Johannes Pointner <johannes.pointner@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Frans Klaver
|
c83959f89f |
hwmon: (lm75) Add support for TMP112
TMP112 is compatible to LM75. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Heiko Schocher
|
d17a7dca04 |
hwmon: Driver for TI TMP103 temperature sensor
Driver for the TI TMP103. The TI TMP103 is similar to the TMP102. It differs from the TMP102 by having only 8 bit registers. Signed-off-by: Heiko Schocher <hs@denx.de> [linux@roeck-us.net: Select REGMAP_I2C in Kconfig] Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Scott Kanowitz
|
f4ff415564 |
hwmon: Add support for Lattice's POWR1220 power manager IC
This patch adds support for Lattice's POWR1220 power manager IC. Read access to all the ADCs on the chip are supported through the hwmon sysfs files. Signed-off-by: Scott Kanowitz <skanowitz@echo360.com> [Guenter Roeck: Removed some extra ( )] Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
|
|
Clemens Ladisch
|
f42bb22243 |
ALSA: virtuoso: add Xonar Essence STX II support
Just add the PCI ID for the STX II. It appears to work the same as the STX, except for the addition of the not-yet-supported daughterboard. Tested-by: Mario <fugazzi99@gmail.com> Tested-by: corubba <corubba@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
|
|
Guennadi Liakhovetski
|
94c7b6fc7c |
dmaengine: add device tree binding documentation for the nbpfaxi driver
The nbpfaxi dmaengine driver doesn't define any new bindings, it only uses standard dmaengine bindings and defines 3 flags for the 3rd parameter of the "dmas" property. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> |