Commit Graph

310681 Commits

Author SHA1 Message Date
Al Viro 754421c8ca HAVE_RESTORE_SIGMASK is defined on all architectures now
Everyone either defines it in arch thread_info.h or has TIF_RESTORE_SIGMASK
and picks default set_restore_sigmask() in linux/thread_info.h.  Kill the
ifdefs, slap #error in linux/thread_info.h to catch breakage when new ones
get merged.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:46 -04:00
Matthew Garrett a6c2390cd6 dell-laptop: Remove rfkill code
The interface just doesn't work on some machines, and Dell haven't been
able to tell us either which machines those are or what we should be
doing instead. This would be fine, except it results in userspace ending
up confused and general sadness. So let's just rip it out for now.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-06-01 12:46:56 -04:00
Miklos Szeredi 0ef97dcfce nfs: don't open in ->d_revalidate
NFSv4 can't do reliable opens in d_revalidate, since it cannot know whether a
mount needs to be followed or not.  It does check d_mountpoint() on the dentry,
which can result in a weird error if the VFS found that the mount does not in
fact need to be followed, e.g.:

  # mount --bind /mnt/nfs /mnt/nfs-clone
  # echo something > /mnt/nfs/tmp/bar
  # echo x > /tmp/file
  # mount --bind /tmp/file /mnt/nfs-clone/tmp/bar
  # cat  /mnt/nfs/tmp/bar
  cat: /mnt/nfs/tmp/bar: Not a directory

Which should, by any sane filesystem, result in "something" being printed.

So instead do the open in f_op->open() and in the unlikely case that the cached
dentry turned out to be invalid, drop the dentry and return EOPENSTALE to let
the VFS retry.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:12:02 -04:00
Miklos Szeredi 16b1c1cd71 vfs: retry last component if opening stale dentry
NFS optimizes away d_revalidates for last component of open.  This means that
open itself can find the dentry stale.

This patch allows the filesystem to return EOPENSTALE and the VFS will retry the
lookup on just the last component if possible.

If the lookup was done using RCU mode, including the last component, then this
is not possible since the parent dentry is lost.  In this case fall back to
non-RCU lookup.  Currently this is not used since NFS will always leave RCU
mode.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:12:01 -04:00
Miklos Szeredi 50ee93afca vfs: nameidata_to_filp(): don't throw away file on error
If open fails, don't put the file.  This allows it to be reused if open needs to
be retried.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:12:01 -04:00
Miklos Szeredi 91daee988d vfs: nameidata_to_filp(): inline __dentry_open()
Copy __dentry_open() into nameidata_to_filp().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:12:01 -04:00
Miklos Szeredi 78f71eff3c vfs: do_dentry_open(): don't put filp
Move put_filp() out to __dentry_open(), the only caller now.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:12:00 -04:00
Miklos Szeredi 90ad1a8ecb vfs: split __dentry_open()
Split __dentry_open() into two functions:

  do_dentry_open() - does most of the actual work, doesn't put file on failure
  open_check_o_direct() - after a successful open, checks direct_IO method

This will allow i_op->atomic_open to do just the file initialization and leave
the direct_IO checking to the VFS.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:12:00 -04:00
Miklos Szeredi 5f5daac12a vfs: do_last() common post lookup
Now the post lookup code can be shared between O_CREAT and plain opens since
they are essentially the same.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:12:00 -04:00
Miklos Szeredi d7fdd7f6e1 vfs: do_last(): add audit_inode before open
This allows this code to be shared between O_CREAT and plain opens.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:59 -04:00
Miklos Szeredi 050ac841ea vfs: do_last(): only return EISDIR for O_CREAT
This allows this code to be shared between O_CREAT and plain opens.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:59 -04:00
Miklos Szeredi af2f55426d vfs: do_last(): check LOOKUP_DIRECTORY
Check for ENOTDIR before finishing open.  This allows this code to be shared
between O_CREAT and plain opens.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:58 -04:00
Miklos Szeredi 54c33e7f95 vfs: do_last(): make ENOENT exit RCU safe
This will allow this code to be used in RCU mode.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:58 -04:00
Miklos Szeredi d45ea86792 vfs: make follow_link check RCU safe
This will allow this code to be used in RCU mode.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:58 -04:00
Miklos Szeredi decf340087 vfs: do_last(): use inode variable
Use helper variable instead of path->dentry->d_inode before complete_walk().
This will allow this code to be used in RCU mode.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:57 -04:00
Miklos Szeredi a1eb331530 vfs: do_last(): inline walk_component()
Copy walk_component() into do_lookup().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:57 -04:00
Miklos Szeredi e276ae672f vfs: do_last(): make exit RCU safe
Allow returning from do_last() with LOOKUP_RCU still set on the "out:" and
"exit:" labels.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:57 -04:00
Miklos Szeredi 697f514df1 vfs: split do_lookup()
Split do_lookup() into two functions:

  lookup_fast() - does cached lookup without i_mutex
  lookup_slow() - does lookup with i_mutex

Both follow managed dentries.

The new functions are needed by atomic_open.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:11:56 -04:00
Matt Fleming 0c7596621e x86, efi: Add EFI boot stub documentation
Since we can't expect every user to read the EFI boot stub code it
seems prudent to have a couple of paragraphs explaining what it is and
how it works.

The "initrd=" option in particular is tricky because it only
understands absolute EFI-style paths (backslashes as directory
separators), and until now this hasn't been documented anywhere. This
has tripped up a couple of users.

Cc: Matthew Garrett <mjg@redhat.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1331907517-3985-4-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-01 09:11:41 -07:00
Matt Fleming 9fa7dedad3 x86, efi; Add EFI boot stub console support
We need a way of printing useful messages to the user, for example
when we fail to open an initrd file, instead of just hanging the
machine without giving the user any indication of what went wrong. So
sprinkle some error messages throughout the EFI boot stub code to make
it easier for users to diagnose/report problems.

Reported-by: Keshav P R <the.ridikulus.rat@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1331907517-3985-3-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-01 09:11:26 -07:00
Matt Fleming 30dc0d0fe5 x86, efi: Only close open files in error path
The loop at the 'close_handles' label in handle_ramdisks() should be
using 'i', which represents the number of initrd files that were
successfully opened, not 'nr_initrds' which is the number of initrd=
arguments passed on the command line.

Currently, if we execute the loop to close all file handles and we
failed to open any initrds we'll try to call the close function on a
garbage pointer, causing the machine to hang.

Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1331907517-3985-2-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-01 09:11:10 -07:00
Josef Bacik e41f941a23 Btrfs: move over to use ->update_time
Btrfs had been doing it's own file_update_time so we could catch ENOSPC
properly, so just update our btrfs_update_time to work with the new stuff and
then we'll be fancy later.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01 12:07:52 -04:00
Josef Bacik c3b2da3148 fs: introduce inode operation ->update_time
Btrfs has to make sure we have space to allocate new blocks in order to modify
the inode, so updating time can fail.  We've gotten around this by having our
own file_update_time but this is kind of a pain, and Christoph has indicated he
would like to make xfs do something different with atime updates.  So introduce
->update_time, where we will deal with i_version an a/m/c time updates and
indicate which changes need to be made.  The normal version just does what it
has always done, updates the time and marks the inode dirty, and then
filesystems can choose to do something different.

I've gone through all of the users of file_update_time and made them check for
errors with the exception of the fault code since it's complicated and I wasn't
quite sure what to do there, also Jan is going to be pushing the file time
updates into page_mkwrite for those who have it so that should satisfy btrfs and
make it not a big deal to check the file_update_time() return code in the
generic fault path. Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01 12:07:25 -04:00
Adam Jackson 47819ba234 drm/edid: Make the header fixup threshold tunable
6 bytes seems to be a reasonable default so far, but for the desperate
it's worth exposing this.

[airlied: change include to module.h for this]

Bugzilla: https://bugzilla.redhat.com/582559
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 17:00:23 +01:00
Alex Deucher 9b00147d9f drm/radeon: fix regression in UMS CS ioctl
radeon_cs_parser_init is called by both the legacy UMS
CS ioctl and the KMS CS ioctl.  Protect KMS specific
pieces of the code by checking that rdev is not NULL.

Reported-by: Michael Burian <michael.burian@sbg.at>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 17:00:21 +01:00
Thomas Hellstrom 0824db38e5 drm/vmwgfx: Fix nasty write past alloced memory area
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 17:00:20 +01:00
Thomas Hellstrom a8ff3ee211 drm/ttm: Fix spinlock imbalance
This imbalance may cause hangs when TTM is trying to swap out a buffer
that is already on the delayed delete list.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 17:00:19 +01:00
Alex Deucher 416a2bd274 drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)
Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and
simplify render backend map. This now properly sets up the backend map
on r6xx-9xx which should improve 3D performance.

Vadim benchmarked also:
Some benchmarks on juniper (5750), fullscreen 1920x1080,
first result - kernel 3.4.0+ (fb21affa), second - with these patches:

Lightsmark:   91 fps => 123 fps    +35%
Doom3:        74 fps => 101 fps    +36%

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 17:00:14 +01:00
Linus Torvalds 51eab603f5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "This includes a fairly large change from Josef around data writeback
  completion.  Before, the writeback wasn't completed until the metadata
  insertions for the extent were done, and this made for fairly large
  latency spikes on the last page of each ordered extent.

  We already had a separate mechanism for tracking pending metadata
  insertions, so Josef just needed to tweak things a little to end
  writeback earlier on the page.  Overall it makes us much friendly to
  memory reclaim and lowers latencies quite a lot for synchronous IO.

  Jan Schmidt has finished some background work required to track btree
  blocks as they go through changes in ownership.  It's the missing
  piece he needed for both btrfs send/receive and subvolume quotas.
  Neither of those are ready yet, but the new tracking code is included
  here.  Most of the time, the new code is off.  It is only used by
  scrub and other backref walkers.

  Stefan Behrens has added io failure tracking.  This includes counters
  for which drives are causing the most trouble so the admin (or an
  automated tool) can choose to kick them out.  We're tracking IO
  errors, crc errors, and generation checks we do on each metadata
  block.

  RAID5/6 did miss the cut this time because I'm having trouble with
  corruptions.  I'll nail it down next week and post as a beta testing
  before 3.6"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (58 commits)
  Btrfs: fix tree mod log rewinded level and rewinding of moved keys
  Btrfs: fix tree mod log del_ptr
  Btrfs: add tree_mod_dont_log helper
  Btrfs: add missing spin_lock for insertion into tree mod log
  Btrfs: add inodes before dropping the extent lock in find_all_leafs
  Btrfs: use delayed ref sequence numbers for all fs-tree updates
  Btrfs: fix false positive in check-integrity on unmount
  Btrfs: fix runtime warning in check-integrity check data mode
  Btrfs: set ioprio of scrub readahead to idle
  Btrfs: fix return code in drop_objectid_items
  Btrfs: check to see if the inode is in the log before fsyncing
  Btrfs: return value of btrfs_read_buffer is checked correctly
  Btrfs: read device stats on mount, write modified ones during commit
  Btrfs: add ioctl to get and reset the device stats
  Btrfs: add device counters for detected IO and checksum errors
  btrfs: Drop unused function btrfs_abort_devices()
  Btrfs: fix the same inode id problem when doing auto defragment
  Btrfs: fall back to non-inline if we don't have enough space
  Btrfs: fix how we deal with the orphan block rsv
  Btrfs: convert the inode bit field to use the actual bit operations
  ...
2012-06-01 08:37:31 -07:00
Linus Torvalds 419f431949 Merge branch 'for-3.5' of git://linux-nfs.org/~bfields/linux
Pull the rest of the nfsd commits from Bruce Fields:
 "... and then I cherry-picked the remainder of the patches from the
  head of my previous branch"

This is the rest of the original nfsd branch, rebased without the
delegation stuff that I thought really needed to be redone.

I don't like rebasing things like this in general, but in this situation
this was the lesser of two evils.

* 'for-3.5' of git://linux-nfs.org/~bfields/linux: (50 commits)
  nfsd4: fix, consolidate client_has_state
  nfsd4: don't remove rebooted client record until confirmation
  nfsd4: remove some dprintk's and a comment
  nfsd4: return "real" sequence id in confirmed case
  nfsd4: fix exchange_id to return confirm flag
  nfsd4: clarify that renewing expired client is a bug
  nfsd4: simpler ordering of setclientid_confirm checks
  nfsd4: setclientid: remove pointless assignment
  nfsd4: fix error return in non-matching-creds case
  nfsd4: fix setclientid_confirm same_cred check
  nfsd4: merge 3 setclientid cases to 2
  nfsd4: pull out common code from setclientid cases
  nfsd4: merge last two setclientid cases
  nfsd4: setclientid/confirm comment cleanup
  nfsd4: setclientid remove unnecessary terms from a logical expression
  nfsd4: move rq_flavor into svc_cred
  nfsd4: stricter cred comparison for setclientid/exchange_id
  nfsd4: move principal name into svc_cred
  nfsd4: allow removing clients not holding state
  nfsd4: rearrange exchange_id logic to simplify
  ...
2012-06-01 08:32:58 -07:00
Matthew Garrett 53039f222c toshiba_acpi: Fix mis-merge
I managed to screw up the various backlight changes and ended up memsetting
the props structure after it had already been populated. This should fix it.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-06-01 11:02:36 -04:00
Jerome Glisse 95c4b23ec4 drm/radeon: fix HD6790, HD6570 backend programming
Without this bit sets we get broken rendering and
lockups.

fglrx sets this bit.

Bugs that should be fixed by this patch :
https://bugs.freedesktop.org/show_bug.cgi?id=49792
https://bugzilla.kernel.org/show_bug.cgi?id=43207
https://bugs.freedesktop.org/show_bug.cgi?id=39282

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 15:40:05 +01:00
Artem Bityutskiy 033369d1af reiserfs: get rid of resierfs_sync_super
This patch stops reiserfs using the VFS 'write_super()' method along with the
s_dirt flag, because they are on their way out.

The whole "superblock write-out" VFS infrastructure is served by the
'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and
writes out all dirty superblock using the '->write_super()' call-back.  But the
problem with this thread is that it wastes power by waking up the system every
5 seconds, even if there are no diry superblocks, or there are no client
file-systems which would need this (e.g., btrfs does not use
'->write_super()'). So we want to kill it completely and thus, we need to make
file-systems to stop using the '->write_super()' VFS service, and then remove
it together with the kernel thread.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:36 -04:00
Artem Bityutskiy 5c5fd81962 reiserfs: mark the superblock as dirty a bit later
The 'journal_mark_dirty()' function currently first marks the superblock as
dirty by setting 's_dirt' to 1, then does various sanity checks and returns,
then actuall does all the magic with the journal.

This is not an ideal order, though. It makes more sense to first do all the
checks, then do all the internal stuff, and at the end notify the VFS that the
superblock is now dirty.

This patch moves the 's_dirt = 1' assignment from the very beginning of this
function to the very end.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:36 -04:00
Artem Bityutskiy 717f03c4d7 reiserfs: remove useless superblock dirtying
The 'reiserfs_resize()' function marks the superblock as dirty by assigning 1
to 's_dirt' and then calls 'journal_mark_dirty()' which does the same. Thus,
we can remove the assignment from 'reiserfs_resize()'.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:36 -04:00
Artem Bityutskiy 25729b0e94 reiserfs: clean-up function return type
Turn 'reiserfs_flush_old_commits()' into a void function because the callers
do not cares about what it returns anyway.

We are going to remove the 'sb->s_dirt' field completely and this patch is a
small step towards this direction.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:36 -04:00
Artem Bityutskiy efaa33eb13 reiserfs: cleanup reiserfs_fill_super a bit
We have the reiserfs superblock pointer in the 'sbi' variable in this
function, no need to use the 'REISERFS_SB(s)' macro which is the same.
This is jut a small clean-up.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:36 -04:00
Al Viro d58367515f sch_atm.c: get rid of poinless extern
sockfd_lookup() is declared in linux/net.h, which is pulled by
linux/skbuff.h (and needed for a lot of other stuff in sch_atm.c
anyway).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:18 -04:00
Al Viro 17d1587f55 unexport do_munmap()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:18 -04:00
Al Viro eb36c5873b new helper: vm_mmap_pgoff()
take it to mm/util.c, convert vm_mmap() to use of that one and
take it to mm/util.c as well, convert both sys_mmap_pgoff() to
use of vm_mmap_pgoff()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:18 -04:00
Al Viro dc982501d9 kill do_mmap() completely
just pull into vm_mmap()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:17 -04:00
Al Viro e3fc629d7b switch aio and shm to do_mmap_pgoff(), make do_mmap() static
after all, 0 bytes and 0 pages is the same thing...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:17 -04:00
Al Viro 98de59bfe4 take calculation of final prot in security_mmap_file() into a helper
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:17 -04:00
Al Viro 9ac4ed4bd0 move security_mmap_addr() to saner place
it really should be done by get_unmapped_area(); that cuts down on
the amount of callers considerably and it's the right place for
that stuff anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:16 -04:00
Al Viro 8b3ec6814c take security_mmap_file() outside of ->mmap_sem
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:01 -04:00
Alex Deucher 0b8c30bc49 drm/radeon: properly program gart on rv740, juniper, cypress, barts, hemlock
Need to program an additional VM register.  This doesn't not currently
cause any problems, but allows us to program the proper backend
map in a subsequent patch which should improve performance on these
asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 15:36:54 +01:00
Alex Deucher 29d654067a drm/radeon: fix bank information in tiling config
While there are cards with more than 8 mem banks, the max
number of banks from a tiling perspective is 8, so cap
the tiling config at 8 banks.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=43448

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 15:36:31 +01:00
Dave Airlie 08ef8e41a6 drm/mgag200: kick off conflicting framebuffers earlier.
It appears grub2 can pass framebuffer info via efifb, so
we need to kick it off earlier to reserve the vram allocation.

(just a fixup same as for cirrus)

Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 11:12:39 +01:00
Dave Airlie dedc14e2a6 drm/cirrus: kick out conflicting framebuffers earlier
It appears that grub2 will pass framebuffer info via EFI,
this causes the vram reserve to fail, so kick out efifb
earlier before cirrus loads.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=826983
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01 11:11:09 +01:00
Hugh Dickins 5e44f8c374 ext4: hole-punch use truncate_pagecache_range
When truncating a file, we unmap pages from userspace first, as that's
usually more efficient than relying, page by page, on the fallback in
truncate_inode_page() - particularly if the file is mapped many times.

Do the same when punching a hole: 3.4 added truncate_pagecache_range()
to do the unmap and trunc, so use it in ext4_ext_punch_hole(), instead
of calling truncate_inode_pages_range() directly.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-06-01 00:15:28 -04:00