Commit Graph

17 Commits

Author SHA1 Message Date
Bhumika Goyal 60af58cde4 ARM: OMAP2+: CM: make cm_ll_data structures as const
Make these const as they are only getting passed to the functions
cm_register and cm_unregister having the arguments as const.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-11 07:40:38 -08:00
Tero Kristo 9012933671 ARM: OMAP2+: PRCM: store also physical addresses for instances
In some cases the physical address info is needed, so store this
under the existing cm*_base, prm_base and prcm_mpu_base variables.
These are converted now to structs that contain both virtual and
physical address base for the instance.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-06-06 00:13:51 -07:00
Tero Kristo 6c0afb5039 clk: ti: convert to use proper register definition for all accesses
Currently, TI clock driver uses an encapsulated struct that is cast into
a void pointer to store all register addresses. This can be considered
as rather nasty hackery, and prevents from expanding the register
address field also. Instead, replace all the code to use proper struct
in place for this, which contains all the previously used data.

This patch is rather large as it is touching multiple files, but this
can't be split up as we need to avoid any boot breakage.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
2017-03-08 13:06:15 +02:00
Andrea Gelmini 3c4d4c2033 ARM: OMAP2+: Fix typo in cm3xxx.c
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:14:37 -07:00
Tero Kristo 425dc8b2df ARM: OMAP2+: CM: move SoC specific init calls within a generic API
This gets rid of need for some exported driver APIs, and simplifies the
initialization of the CM driver. Done in preparation to make CM a
separate driver. The init data is now also passed to the SoC specific
implementations, allowing future expansion to add feature flags etc.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-31 21:26:50 +03:00
Tero Kristo 5970ca2db9 ARM: OMAP2+: CM: determine CM base address from device tree
There is no need to provide the CM base address through a low-level API
from the low-level IO init, as this information is available through DT.
Re-routed the parsing function to be called from the CM drivers also to
simplify the implementation under io.c.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-03-27 10:55:57 +02:00
Tero Kristo 2196a9b84a ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
CM driver has a generic API which calls the SoC specific split function
through cm_ll_data, so there is no need for the SoC specific functions to
be publicly available.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27 08:39:24 -07:00
Tero Kristo f2650d6e4f ARM: OMAP2+: CM: make clkdm_hwsup operations static
These are not accessed outside the cm*.c files themselves, so make them
static.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27 08:39:24 -07:00
Tero Kristo 021b6ff05c ARM: OMAP2+: CM: add common API for cm_wait_module_ready
This patch consolidates the parameters provided for the SoC specific
cm_*_wait_module_ready calls, adds the missing cm_ll_data function
pointers and uses the now generic call from the mach-omap2 board code.
SoC specific *_wait_module_ready calls are also made static so they
can only be accessed through the generic CM driver API only.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27 08:39:23 -07:00
Tero Kristo 7af1363742 ARM: OMAP2/3: CM: remove some external dependencies
Done in preparation to move the CM driver to its own driver folder.
These drivers will not have access to functionality under mach-omap2 anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-15 22:34:25 -06:00
Tero Kristo b21be7bcd8 ARM: OMAP3: CM: remove a few OMAP34XX_CM_REGADDR defines
Remove a few OMAP34XX_CM_REGADDR defines and replace these with offset
based register accesses instead.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2014-05-11 19:35:13 -06:00
Tero Kristo c6a2d839d0 ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
OMAP3 PM code for off-mode currently saves the scratchpad contents for CM
registers within OMAP control module driver. However, as we are separating
CM code into its own driver, this must be moved also. This patch adds a
new API for saving the CM scratchpad contents and uses this from the high
level scratchpad save function.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-10-19 10:11:52 -06:00
Paul Walmsley 9249387019 ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
The atomic usecounts seem to be confusing, and are no longer needed
since the operations that they are attached to really should take
place under lock.  Replace the atomic counters with simple integers,
protected by the enclosing powerdomain spinlock.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-29 14:59:58 -07:00
Paul Walmsley 65958fb6ca ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions
Split the clkdm_(add|del)_(wk|sleep)dep() functions into lockless and
locking versions -- this will be needed in a subsequent patch.  Also,
while here, remove the leading underscore, since these are not
currently static functions.  And for functions that have
kerneldoc-style comment blocks, but which are missing the initial
'/**' tag, fix the tag to indicate that they are kerneldoc.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-29 14:59:57 -07:00
Paul Walmsley c4ceedcb18 ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions
Convert the OMAP clock code's _omap2_module_wait_ready() to use
SoC-independent CM functions that are provided by the CM code, rather
than using a deprecated function from mach-omap2/prcm.c.

This facilitates the future conversion of the CM code to a driver, and
also removes a mach-omap2/prcm.c user.  mach-omap2/prcm.c will be removed
by a subsequent patch.

Some modules have IDLEST registers that aren't in the CM module, such
as the AM3517 IDLEST bits.  So we also need a fallback function for
these non-CM odd cases.  Create a temporary one in mach-omap2/clock.c,
intended to exist until the SCM drivers are ready.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-11-08 12:33:08 -07:00
Paul Walmsley 4bd5259e53 ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM
Move the low-level SoC-specific clockdomain control functions into
cm*.c and prm*.c.  For example, OMAP2xxx low-level clockdomain
functions go into cm2xxx.c.  Then remove the unnecessary
clockdomain*xxx*.c files.

The objective is to centralize low-level CM and PRM register accesses
into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP
SoC-independent API to higher-level OMAP power management code.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Rajendra Nayak <rnayak@ti.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:11 -06:00
Paul Walmsley ff4ae5d931 ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files
Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and
OMAP2xxx-specific macros into cm2xxx.[ch].  Move basic CM register
access functions into static inline functions in cm2xxx_3xxx.h,
leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c.

As part of this, split the CM and hwmod code that waits for devices to
become ready into SoC-specific functions.

This is in preparation for the upcoming move of this code to drivers/.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 01:01:11 -06:00