With node column on big CPUs servers we can run out of stdio header
space quite soon. Enlarging header buffer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474290610-23241-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stdio and tui has same code to reset hpp format column width.
Factor it out as a new function.
Suggested-and-Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160920053025.13989-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now the hists__fprintf_hierarchy_headers() is a simple wrapper passing
field separator. Let's do it directly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160913074552.13284-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the --hierarchy option is used, each entry has its own hpp_list to
show the result. But it is not updating the width of each column for
perf-top. The perf-report command has no problem since it resets it
during header display.
$ sudo perf top --hierarchy --stdio
PerfTop: 160 irqs/sec kernel:38.8% exact: 100.0%
[4000Hz cycles:pp], (all, 12 CPUs)
----------------------------------------------------------------------
52.32% perf
24.74% [.] __symbols__insert
5.62% [.] rb_next
5.14% [.] dso__load_sym
Move the code into hists__fprintf() so that it can be called always.
Also it'd be better to put similar code together.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 1b2dbbf41a ("perf hists: Use own hpp_list for hierarchy mode")
Link: http://lkml.kernel.org/r/20160913074552.13284-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian reported that the event group on TUI shows duplicated overhead.
This was due to a bug on calculating hpp->buf position. The
hpp_advance() was called from __hpp__slsmg_color_printf() on TUI but
it's already called from the hpp__call_print_fn macro in __hpp__fmt().
The end result is that the print function returns number of bytes it
printed but the buffer advanced twice of the length.
This is generally not a problem since it doesn't need to access the
buffer again. But with event group, overhead needs to be printed
multiple times and hist_entry__snprintf_alignment() tries to fill the
space with buffer after it printed. So it (brokenly) showed the last
overhead again.
The bug was there from the beginning, but I think it's only revealed
when the alignment function was added.
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 89fee70943 ("perf hists: Do column alignment on the format iterator")
Link: http://lkml.kernel.org/r/20160912061958.16656-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're not using it anymore, few users were, but we really could do
without it, simplify lots of functions by removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'map' is being already checked if it is NULL at the start of
do_zoom_dso(), so the second subsequent check is superfluous and can be
removed.
Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1471278343-14999-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add span argument for header callback function.
The handling of this argument is completely in the hands of the
callback. The only thing the caller ensures is it's zeroed on the
beginning.
Omitting span skipping in hierarchy headers and gtk code.
The c2c code use this to span header lines based on the entries span
configuration.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display multiple header lines in stdio output , if it's configured
within struct perf_hpp_list::nr_header_lines.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display multiple header lines in TUI browser, if it's configured within
struct perf_hpp_list::nr_header_lines.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding line argument into perf_hpp_fmt's header callback to be able to
request specific header line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we support just single line headers, this is first step to
allow more.
Store the number of header lines in perf_hpp_list, which encompasses all
the display/sort entries and is thus suitable to hold this value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just using pr_error() which makes it difficult for non stdio UIs
to provide errors using its widgets, as they need to somehow catch what
was passed to pr_error().
Fix it by introducing a __strerror() interface like the ones used
elsewhere, for instance target__strerror().
This is just the initial step, more work will be done, but first some
error handling bugs noticed while working on this need to be dealt with.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dgd22zl2xg7x4vcnoa83jxfb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will not annotate anything, it will just disassembly the
given map->dso and symbol.
It currently does this by parsing the output of 'objdump --disassemble',
but this could conceivably be done using a library or an offshot of
the kernel's instruction decoder (arch/x86/lib/inat.c), etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2xpfl4bfnrd6x584b390qok7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cache.h header doesn't use any of the definitions in some of the
headers it includes, ditch them and fix the fallout, where files were
getting stuff they needed just because they were including it, sometimes
not using what it really exports at all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l6r2bmj8h1g3e01wr981on0n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.
But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.
So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In --stdio we turn off color output when the output is not a tty,
which is not always desirable, for instance, in:
perf annotate | more
the 'more' tool is perfectly capable of processing the escape sequences
for colored output.
Allow using the existing logic for .perfconfig's "color.ui" to be used
from the command line by providing a stdio__config_color() helper, that
will be used by annotate and report in follow up patches.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1u4wjdbcc41dxndsb4klpa9y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce helper to detect 'ret' instructions and use the same in the TUI.
A helper is needed since some architectures such as powerpc have more
than one return instruction.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/1466769240-12376-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the semantics for list.h in the kernel, that are used to
implement those macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lately util/config.h has been added but util/cache.h has declarations of
functions and a global variable for config features.
To manage codes about configuration at one spot, move them to
util/config.h and let source files that need config features include
config.h And if the source files that included previous cache.h need
only config.h, remove including cache.h.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1466672119-4852-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factoring out the hist_browser initialization code, so it could be used
from other parts in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we could use hist_browser__new for generic hist browser in following
patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving horizontal scroll init to initialization function as already
intended.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can now setup title callback for hist_browser, which will be useful
in following changes to create customized hist_browsers.
This also separates struct perf_evsel dependency out of hist_browser
basic code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we can use it outside of ui/browsers/hists.c and extend it in
following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we can use it outside of ui/browsers/hists.c and extend it in
following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1466459899-1166-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing perf_evsel arg perf_hpp_fmt's width callback with hists
object.
This will be helpful in future for non evsel related hist browsers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replacing perf_evsel arg perf_hpp_fmt's header callback with hists
object.
None of the actual callbacks actually use evsel object, also this will
be helpful in future for non evsel related hist browsers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be convenient in following patches to display hists entries
without callchains even if they are defined.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need, we have the hists pointer in struct hist_entry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing hists__fprintf_standard_headers function to separate
standard headers display code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing hists__fprintf_hierarchy_headers function to separate
hierarchy headers display code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing hists__fprintf_headers function to separate the code that
displays headers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be useful for future changes that enhance headers with multiple
lines and span columns, which don't affect hierarchy headers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have sort dimensions private for struct hists,
we need to make dimension booleans hists specific as
well.
Moving sort__has_comm into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_thread into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_socket into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_dso into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__has_sym into struct perf_hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-u701i6qpecgm9jiat52i8l98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be used in cases for both sides trim.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andreas Hollmann <hollmann@in.tum.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1460013073-18444-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 4b3a321223 ("perf hists browser: Support flat callchains") commit
over-aggressively tried to optimize callchain_node__init_have_children().
That lead to --tui mode not allowing to expand call chain elements if a
call chain element had only one parent. That's why --inverted callgraphs
looked halfway sane, but plain ones didn't.
Revert that individual optimization, it wasn't really related to the
rest of the commit.
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 4b3a321223 ("perf hists browser: Support flat callchains")
Link: http://lkml.kernel.org/r/20160330190245.GB13305@awork2.anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All over the tree.
Cc: David Ahern <dsahern@gmail.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-8nzhnokxyp8y4v7gf0j00oyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The context menu in TUI hists browser checks corresponding sort keys
when creating the menu item. But hotkey actions lacks these checks so
it can filter using incorrect info.
For example, default sort key of 'perf top' doesn't contain 'comm' or
'pid' sort key so each hist entry's thread info is not reliable. Thus
it should prohibit using thread filter on 't' key.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 2eafd410e6 ("perf hists browser: Only 'Zoom into thread'
only when sort order has 'pid'") disabled thread filtering in hist
browser for the default sort key. However the he->thread is still valid
even if 'pid' sort key is not given. Only thing it should not use is
the pid (or tid) of the thread. So allow to filter by thread when
'comm' sort key is given and show pid only if 'pid' sort key is given.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The nr_sort_keys field is to carry the number of sort entries in a
hpp_list or hists to determine the depth of indentation of a hist entry.
As it's only used in hierarchy mode and now we have used nr_hpp_node for
this reason, there's no need to keep it anymore. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hist_browser__fprintf_hierarchy_entry() if to dump current output
into a file so it needs to be sync-ed with the corresponding function
hist_browser__show_hierarchy_entry(). So use hists->nr_hpp_node to
indent width and use first fmt_node to print overhead columns instead of
checking whether it's a sort entry (or dynamic entry).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Like in stdio, use this info to print entries with multiple
sort keys in a single hierarchy properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-8-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Like in stdio, use this info to print entries with multiple
sort keys in a single hierarchy properly.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-7-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now hpp formats are linked using perf_hpp_list_node when hierarchy is
enabled. Use this info to print entries with multiple sort keys in a
single hierarchy properly.
For example, the below example shows using 4 sort keys with 2 levels.
$ perf report --hierarchy -s '{prev_pid,prev_comm},{next_pid,next_comm}' \
--percent-limit 1 -i perf.data.sched
...
# Overhead prev_pid+prev_comm / next_pid+next_comm
# ........... .......................................
#
22.36% 0 swapper/0
9.48% 17773 transmission-gt
5.25% 109 kworker/0:1H
1.53% 6524 Xephyr
21.39% 17773 transmission-gt
9.52% 0 swapper/0
9.04% 0 swapper/2
1.78% 0 swapper/3
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-6-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When multiple sort keys are used in a single hierarchy, it should indent
using number of hierarchy levels instead of number of sort keys.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-5-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now each hists has its own hpp lists in hierarchy. So instead of having
a pointer to a single perf_hpp_fmt in a hist entry, make it point the
hpp_list for its level. This will be used to support multiple sort keys
in a single hierarchy level.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-3-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The perf_hpp__setup_hists_formats() is to build hists-specific output
formats (and sort keys). Currently it's only used in order to build the
output format in a hierarchy with same sort keys, but it could be used
with different sort keys in non-hierarchy mode later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-2-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The dynamic entries are right-aligned unlike other entries since it
usually has numeric value. But for the hierarchy mode, left alignment
is more appropriate IMHO. Also trim spaces on the left so that we can
easily identify the hierarchy.
Before:
$ perf report --hierarchy -i perf.data.kmem -s gfp_flags,ptr,bytes_req --stdio -g none
...
#
# Overhead gfp_flags / ptr / bytes_req
# .............. .................................................................................................
#
91.67% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
37.50% 0xffff8803f7669400
37.50% 448
8.33% 0xffff8803f766be00
8.33% 96
4.17% 0xffff8800d156dc00
4.17% 704
After:
# Overhead gfp_flags / ptr / bytes_req
# .............. ....................................
#
91.67% GFP_ATOMIC|GFP_NOWARN|GFP_NOMEMALLOC
37.50% 0xffff8803f7669400
37.50% 448
8.33% 0xffff8803f766be00
8.33% 96
4.17% 0xffff8800d156dc00
4.17% 704
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dynamic entries are used in the hierarchy mode with multiple
events, the output might not be aligned properly. In the hierarchy
mode, the each sort column is indented using total number of sort keys.
So it keeps track of number of sort keys when adding them. However
a dynamic sort key can be added more than once when multiple events have
same field names. This results in unnecessarily long indentation in the
output.
For example perf kmem records following events:
$ perf evlist --trace-fields -i perf.data.kmem
kmem:kmalloc: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags
kmem:kmalloc_node: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags,node
kmem:kfree: trace_fields: call_site,ptr
kmem:kmem_cache_alloc: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags
kmem:kmem_cache_alloc_node: trace_fields: call_site,ptr,bytes_req,bytes_alloc,gfp_flags,node
kmem:kmem_cache_free: trace_fields: call_site,ptr
kmem:mm_page_alloc: trace_fields: page,order,gfp_flags,migratetype
kmem:mm_page_free: trace_fields: page,order
As you can see, many field names shared between kmem events. So adding
'ptr' dynamic sort key alone will set nr_sort_keys to 6. And this adds
many unnecessary spaces between columns.
Before:
$ perf report -i perf.data.kmem --hierarchy -s ptr -g none --stdio
...
# Overhead ptr
# ....................... ...................................
#
99.89% 0xffff8803ffb79720
0.06% 0xffff8803d228a000
0.03% 0xffff8803f7678f00
0.00% 0xffff880401dc5280
0.00% 0xffff880406172380
0.00% 0xffff8803ffac3a00
0.00% 0xffff8803ffac1600
After:
# Overhead ptr
# ........ ....................
#
99.89% 0xffff8803ffb79720
0.06% 0xffff8803d228a000
0.03% 0xffff8803f7678f00
0.00% 0xffff880401dc5280
0.00% 0xffff880406172380
0.00% 0xffff8803ffac3a00
0.00% 0xffff8803ffac1600
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456512767-1164-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like the stdio, it should show messages about omitted hierarchy
entries. Please refer the previous commit for more details.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like the stdio, it should show messages about omitted hierarchy entries.
Please refer the previous commit for more details.
As it needs to check an entry is omitted or not multiple times, add the
has_no_entry field in the hist entry.
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous patch introduced __rb_hierarchy_next() function with
various move direction like HMD_FORCE_CHILD but missed to change using
it some place.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the hierarchy mode is used, some entries might be omiited due to a
percent limit or filter. In this case the output hierarchy is different
than other entries. Add an informative message to users about this.
For example, when 4% of percent limit is applied:
Before:
# Overhead Command / Shared Object / Symbol
# .............. ..........................................
#
49.09% swapper
48.67% [kernel.vmlinux]
34.42% [k] intel_idle
11.51% firefox
8.87% libpthread-2.22.so
6.60% [.] __GI___libc_recvmsg
10.49% gnome-shell
4.74% libc-2.22.so
10.08% Xorg
6.11% libc-2.22.so
5.27% [.] __memcpy_sse2_unaligned
6.15% perf
Note that, gnome-shell/libc has no symbols and perf has no dso/symbols.
With that patch the output will look like below:
After:
# Overhead Command / Shared Object / Symbol
# .............. ..........................................
#
49.09% swapper
48.67% [kernel.vmlinux]
34.42% [k] intel_idle
11.51% firefox
8.87% libpthread-2.22.so
6.60% [.] __GI___libc_recvmsg
10.49% gnome-shell
4.74% libc-2.22.so
no entry >= 4.00%
10.08% Xorg
6.11% libc-2.22.so
5.27% [.] __memcpy_sse2_unaligned
6.15% perf
no entry >= 4.00%
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists__overhead_width() is to calculate width occupied by the
overhead (and others) columns before the sort columns.
The hist_entry__has_hiearchy_children() is to check whether an entry has
lower entries (children) in the hierarchy to be shown in the output.
This means the children should not be filtered out and above the percent
limit.
These two functions will be used to show information when all children
of an entry is omitted by the percent limit (or filter).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hierarchy output mode is to group entries for each level so that
user can see higher level picture more easily.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-16-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement hierarchy mode in TUI. The output is look like stdio but it
also supports to fold/unfold children dynamically.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'C' and 'E' keys are to collapse/expand all hist entries. Update
nr_hierarchy_entries properly in this case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add nr_hierarchy_entries field to keep current number of (unfolded) hist
entries. And the hist_entry->nr_rows carries number of direct children.
But in the hierarchy mode, entry can have grand children and callchains.
So update the number properly using hierarchy_count_rows() when toggling
the folded state (by pressing ENTER key).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hierarchy output mode is to group entries so the existing columns
won't fit to the new output. Treat all sort keys as a single column and
separate headers by "/".
# Overhead Command / Shared Object
# ........... ................................
#
15.11% swapper
14.97% [kernel.vmlinux]
0.09% [libahci]
0.05% [iwlwifi]
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hierarchy output mode is to group entries for each level so that
user can see higher level picture more easily. It also helps to find
out which component is most costly. The output will look like below:
15.11% swapper
14.97% [kernel.vmlinux]
0.09% [libahci]
0.05% [iwlwifi]
10.29% irq/33-iwlwifi
6.45% [kernel.vmlinux]
1.41% [mac80211]
1.15% [iwldvm]
1.14% [iwlwifi]
0.14% [cfg80211]
4.81% firefox
3.92% libxul.so
0.34% [kernel.vmlinux]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used for hierarchy output mode to indent entries properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dynamic entry is created for each field in a tracepoint event.
Since they have no fixed hpp format index, it should skip when
perf_hpp__reset_width() is called.
This caused following assertion failure..
$ perf record -e sched:sched_switch -a sleep 1
$ perf report -s comm,next_pid --stdio
perf: ui/hist.c:651: perf_hpp__reset_width:
Assertion `!(fmt->idx >= PERF_HPP__MAX_INDEX)' failed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were doing column alignment in the format function for each cell,
returning a string padded with spaces so that when the next column is
printed the cursor is at its column alignment.
This ends up needlessly printing trailing spaces, do it at the format
iterator, that is where we know if it is needed, i.e. if there is more
columns to be printed.
This eliminates the need for triming lines when doing a dump using 'P'
in the TUI browser and also produces far saner results with things like
piping 'perf report' to 'less'.
Right now only the formatters for sym->name and the 'locked' column
(perf mem report), that are the ones that end up at the end of lines
in the default 'perf report', 'perf top' and 'perf mem report' tools,
the others will be done in a subsequent patch.
In the end the 'width' parameter for the formatters now mean, in
'printf' terms, the 'precision', where before it was the field 'width'.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-s7iwl2gj23w92l6tibnrcqzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'L' key action to change the percent limit applied to both of hist
entries and callchains.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1454508683-5735-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the hist object having the perf_hpp_list we can now iterate output
format entries based in the hists object. Adding hists__for_each_format
macro to do that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-26-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding struct perf_hpp_list argument to following helper functions:
void perf_hpp__setup_output_field(struct perf_hpp_list *list);
void perf_hpp__reset_output_field(struct perf_hpp_list *list);
void perf_hpp__append_sort_keys(struct perf_hpp_list *list);
so they could be used on hists's hpp_list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-24-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 2 perf_hpp_list register helpers:
perf_hpp_list__column_register()
perf_hpp_list__register_sort_field()
to be called within existing helpers:
perf_hpp__column_register()
perf_hpp__register_sort_field()
to register format entries within global perf_hpp_list object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gather output and sort lists under struct perf_hpp_list, so we could
have multiple instancies of sort/output format entries.
Replacing current perf_hpp__list and perf_hpp__sort_list lists with
single perf_hpp_list instance.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-15-git-send-email-jolsa@kernel.org
[ Renamed fields to .{fields,sorts} as suggested by Namhyung and acked by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With multiple list holding format entries, we need the support properly
releasing format output/sort fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions are no longer needed. They operate over perf_hpp__format
array which is now used only as template for dynamic entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use static output fields, because we have single global
list of all sort/output fields.
We will add hists specific sort and output lists in following patches,
so we need all format entries to be dynamically allocated. Adding
support to allocate output sort field.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have the 'equal' method implemented for hpp format entries
we can ease up the logic in the following functions and make them
generic wrt comparing format entries:
perf_hpp__setup_output_field
perf_hpp__append_sort_keys
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'hpp__equal' callback function to compare hpp output format
entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To easily compare format entries and make it available for all kinds of
format entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are going to add dynamic hpp format fields, so we need to make the
'len' change for the format itself, not in the perf_hpp__format
template.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently there's no way of comparing hpp format entries, which is
needed in following patches.
Adding _idx fields into struct perf_hpp_fmt to recognize and be able to
compare hpp format entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When all callchains of a hist entry is percent-limited, do not add a
blank line at the end. It makes the entry look like it doesn't have
callchains.
Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornet
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols. This is because it assumes that the percentage
is same as parents. But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown. In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.
For example, let's see the following callchain.
$ perf report --no-children --percent-limit 0.01 --tui
...
- 0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- 0.04% mmap_region
do_mmap_pgoff
- vm_mmap_pgoff
+ 0.02% sys_mmap_pgoff
+ 0.02% vm_mmap
+ 0.02% mprotect_fixup
Current code omits the percent if 'mmap_region' becomes the only node
when percent limit is set to 0.03%, its percent is not 0.06% but users
will assume it incorrectly.
Before:
$ perf report --no-children --percent-limit 0.03 --tui
...
0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- mmap_region
do_mmap_pgoff
vm_mmap_pgoff
After:
$ perf report --no-children --percent-limit 0.03 --tui
...
0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- 0.04% mmap_region
do_mmap_pgoff
vm_mmap_pgoff
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass parent node's total period to callchain print functions. This info
is needed by later patch to determine whether it can omit percent or not
correctly.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 8c430a3486 ("perf hists browser: Support folded
callchains") missed to update hist_browser__dump() so it always shows
graph-style callchains regardless of current setting.
To fix that, factor out callchain printing code and rename the existing
function which prints graph-style callchain.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8c430a3486 ("perf hists browser: Support folded callchains")
Link: http://lkml.kernel.org/r/1453909257-26015-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols. This is because it assumes that the percentage
is same as parents. But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown. In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.
For example, let's see the following callchain.
$ perf report -s comm --percent-limit 0.01 --stdio
...
9.95% swapper
|
|--7.57%--intel_idle
| cpuidle_enter_state
| cpuidle_enter
| call_cpuidle
| cpu_startup_entry
| |
| |--4.89%--start_secondary
| |
| --2.68%--rest_init
| start_kernel
| x86_64_start_reservations
| x86_64_start_kernel
|
|--0.15%--__schedule
| |
| |--0.13%--schedule
| | schedule_preempt_disable
| | cpu_startup_entry
| | |
| | |--0.09%--start_secondary
| | |
| | --0.04%--rest_init
| | start_kernel
| | x86_64_start_reservations
| | x86_64_start_kernel
| |
| --0.01%--schedule_preempt_disabled
| cpu_startup_entry
...
Current code omits the percent if 'intel_idle' becomes the only node
when percent limit is set to 0.5%, its percent is not 9.95% but users
will assume it incorrectly.
Before:
$ perf report --percent-limit 0.5 --stdio
...
9.95% swapper
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--4.89%--start_secondary
|
--2.68%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
After:
$ perf report --percent-limit 0.5 --stdio
...
9.95% swapper
|
--7.57%--intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--4.89%--start_secondary
|
--2.68%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass hist entry's period to graph callchain print function. This info
is needed by later patch to determine whether it can omit percentage of
top-level node or not.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's just a wrapper function to align the start position ofcallchains to
'comm' of each thread if it's a first sort key. But it doesn't not work
with tracepoint events and also with upcoming hierarchy view.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The script and data-switch context menu are only meaningful when it
deals with a data file. So add a check so that it cannot be shown when
perf-top is run.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453555902-18401-4-git-send-email-namhyung@kernel.org
[ Use goto skip_scripting instead of two is_report_browser() tests ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we check more strictly what each of the menu entries need, we
can stop bailing out when 'sym' is not in the --sort order, instead we
let each option be added if what it needs is present.
This way, for instance, we can run scripts on all samples, see DSO map
details when 'dso' is in the --sort provided, etc.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency with the other sort order checks.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch, moved check to add_socket_opt() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't offer a zoom into DSO when a bucket (struct hist_entry) may
have samples for more than one DSO, i.e. when 'dso' is not part of
the sort order, ditto for 'Map details', fix it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch, moved check to add_{dso,map}_opt() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When this feature was introduced a check was made if there was a
resolved symbol under the cursor, it got lost in commit ea7cd59233
("perf hists browser: Split popup menu actions - part 2"), reinstate it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ea7cd59233 ("perf hists browser: Split popup menu actions - part 2")
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't offer a zoom into thread when a bucket (struct hist_entry) may
have samples for more than one thread, i.e. when 'pid' is not part of
the sort order, fix it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org
[ Carved out from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
USe 'jump_arrows' config name instead of 'code' on 'colors' section.
'colors.code' config is only for jump arrows on assembly code listings
i.e.
│ ┌──jmp 1333
│ │ xchg %ax,%ax
│ │ mov %r15,%r10
│ └─→cmp %r15,%r14
But this config name seems unfit.
'jump_arrows' is more descriptive than 'code'.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1452240971-25418-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The issue was pointed out by gcc-6's -Wmisleading-indentation.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: c97cf42219 ("perf top: Live TUI Annotation")
Link: http://lkml.kernel.org/r/20151214154403.GB1409@x4
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a tip message contains a percent sign, it was treated printf format
specifier so broken string was printed like below.
Tip: Limit to show entries above 577nly: perf report --percent-limit 5
^^^
As ui_browser__show receives format string, pass additional "%s" so that
the help (tip) message can be printed as is.
Tip: Limit to show entries above 5% only: perf report --percent-limit 5
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452509594-13616-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We currently set 'overhead' and 'overhead_children' as default sort keys
within perf_hpp__init function by directly adding into the sort list.
This patch adds 'overhead' and 'overhead_children' in text form into
sort_keys and let them be added by standard sort dimension interface.
We need to eliminate dirrect sort_list additions to be able to add
support for hists specific sort keys.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Boris reported that 'perf top' is unusable on his default 'black on
white' terminal, which uses (eye friendly) light-grey as a background
color.
The reason is that the TUI cursor for the current selection line uses
HE_COLORSET_SELECTED, and that has a default background color of
'lightgrey' - which is a common terminal background choice and thus
the colors conflict.
Use yellow as the background color instead: that should be an uncommon
terminal background, yet it's still ergonomic on both black and
white/grey terminals.
[ It would be a better solution to straight out detect color
collisions and resolve them reasonably by converting them to RGB and
calculating color space distances, but I was unable to find
proper documentation for SLtt_get_color_object() to recover the
current color scheme so I gave up ... Yellow works well enough. ]
Reported-and-Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150305103213.GA23046@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If feed perf a symbol filter in cmdline and the result is empty,
pressing 'Enter' in the hist browser causes crash:
# ./perf report perf.data <-- Common mistake for beginners
Then press 'Enter':
perf: Segmentation fault
-------- backtrace --------
/home/wangnan/perf[0x53e578]
/lib64/libc.so.6(+0x3545f)[0x7f76bafe045f]
/home/wangnan/perf[0x539dd4]
/home/wangnan/perf(perf_evlist__tui_browse_hists+0x96)[0x53d216]
/home/wangnan/perf(cmd_report+0x1b9f)[0x442c7f]
/home/wangnan/perf[0x47efa2]
/home/wangnan/perf(main+0x5f5)[0x432fa5]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7f76bafccbd4]
/home/wangnan/perf[0x4330d4]
This is because 'perf.data' is interpreted as a symbol filter, and the
result is empty, so selection is empty. However,
hist_browser__toggle_fold() forgets to check it.
This patch simply return false when selection is NULL.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the following steps:
Step 1: perf report
Step 2: Use UP/DOWN to select an entry, don't press 'ENTER'
Step 3: Use '/' to filter symbols, use a filter which returns
empty result
Step 4: Press 'ENTER'
We see that, even if we have filtered all the symbols (and the main
interface is empty), pressing 'ENTER' still selects one symbol. This
behavior surprises the user.
This patch resets browser->{he_,}selection in hist_browser__refresh()
and lets it choose default selection. In this case
browser->{he_,}selection keeps NULL so user won't see annotation item in
menu.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch we can trigger a segfault by following steps:
Step 0: Use 'perf record' to generate a perf.data without callchain
Step 1: perf report
Step 2: Use UP/DOWN to select an entry, don't press 'ENTER'
Step 3: Use '/' to filter symbols, use a filter which returns
empty result
Step 4: Press 'ENTER' (notice here that the old selection is still
there. This is another problem)
Step 5: Press 'ENTER' to annotate that symbol
Step 6: Press 'LEFT' to go out.
Result: segfault:
perf: Segmentation fault
-------- backtrace --------
/home/wangnan/perf[0x53e568]
/lib64/libc.so.6(+0x3545f)[0x7fba75d3245f]
/home/wangnan/perf[0x537516]
/home/wangnan/perf[0x533fef]
/home/wangnan/perf[0x53b347]
/home/wangnan/perf(perf_evlist__tui_browse_hists+0x96)[0x53d206]
/home/wangnan/perf(cmd_report+0x1b9f)[0x442c7f]
/home/wangnan/perf[0x47efa2]
/home/wangnan/perf(main+0x5f5)[0x432fa5]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7fba75d1ebd4]
/home/wangnan/perf[0x4330d4]
This is because in this case 'nd' could be NULL in
ui_browser__hists_seek(), but that function never checks it.
This patch adds checker for potential NULL pointer in that function.
After this patch the above steps won't segfault.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1449455746-41952-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf report on TUI was called with -S symbol filter, it should
update nr entries even if min_pcnt is 0. IIRC the reason was to update
nr entries after applying minimum percent threshold. But if symbol
filter was given on command line (with -S option), it should use
hists->nr_non_filtered_entries instead of hists->nr_entries.
So this patch fixes a bug of navigating hists browser that the cursor
goes beyond the number of entries when -S (or similar) option is used.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448645559-31167-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The folded callchain mode is to print all chains in a single line.
Currently perf report --gtk doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flat callchain mode is to print all chains in a simple flat
hierarchy so make it easy to see.
Currently perf report --gtk doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
See the previous commit on TUI support for more information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The folded callchain mode prints all chains in a single line.
Currently perf report --tui doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add flat_val list to
struct callchain_node and show them along with the (normal) val list.
For example, folded callchain looks like below:
$ perf report -g folded --tui
Samples: 234 of event 'cycles:pp', Event count (approx.): 32605268
Overhead Command Shared Object Symbol
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
+ 28.63% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
+ 11.30% intel_idle; cpuidle_enter_state; cpuidle_enter; ...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flat callchain mode is to print all chains in a single, simple
hierarchy so make it easy to see.
Currently perf report --tui doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
For example, consider following callchains with '-g graph'.
$ perf report -g graph
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
- cpu_startup_entry
28.63% start_secondary
- 11.30% rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Before:
$ perf report -g flat
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
28.63% start_secondary
- 11.30% rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
After:
$ perf report -g flat
- 39.93% swapper [kernel.vmlinux] [k] intel_idle
- 28.63% intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_secondary
- 11.30% intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function is to print a single callchain list entry. As this
function will be used by other function, factor out to a separate
function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now -g/--call-graph option supports how to display callchain values.
Possible values are 'percent', 'period' and 'count'. The percent is
same as before and it's the default behavior. The period displays the
raw period value rather than the percentage. The count displays the
number of occurrences.
$ perf report --no-children --stdio -g percent
...
39.93% swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--28.63%-- start_secondary
|
--11.30%-- rest_init
$ perf report --no-children --show-total-period --stdio -g period
...
39.93% 13018705 swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--9334403-- start_secondary
|
--3684302-- rest_init
$ perf report --no-children --show-nr-samples --stdio -g count
...
39.93% 80 swapper [kernel.vmlinux] [k] intel_idel
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--57-- start_secondary
|
--23-- rest_init
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation to support for printing other type of callchain
value like count or period.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org
[ renamed new _sprintf_ operation to _scnprintf_ ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new call chain option (-g) 'folded' to print callchains in a line.
The callchains are separated by semicolons, and preceded by (absolute)
percent values and a space.
For example, the following 20 lines can be printed in 3 lines with the
folded output mode:
$ perf report -g flat --no-children | grep -v ^# | head -20
60.48% swapper [kernel.vmlinux] [k] intel_idle
54.60%
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
start_secondary
5.88%
intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
$ perf report -g folded --no-children | grep -v ^# | head -3
60.48% swapper [kernel.vmlinux] [k] intel_idle
54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
This mode is supported only for --stdio now and intended to be used by
some scripts like in FlameGraphs[1]. Support for other UI might be
added later.
[1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html
Requested-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So no need to have a 'dso' member in 'popup_action', remove it as no
code is using it, already.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-76a6s0007slug0op0wkl6o8b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When pressing 'd' the expected action is to filter all entries by the
DSO in the current entry, but for that the action->map needs to be set,
and only action->dso was being set, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 045b80dd03 ("perf hists browser: Use the map to determine if a DSO is being used as a kernel")
Link: http://lkml.kernel.org/n/tip-xqhfzgoblq49lk5h5u82atro@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_config() infrastructure we inherited from git calls die() when
the provided config callback returns -1, meaning some key in a config
section is unexpected, that seems ok for a stdio based tool, but in
--tui we end up messing up the output, so just tell the user about the
error, wait for a keystroke and return 0, being more resilient and
proceeding with what we managed to parse.
That die() needs to die, tho :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pqtsffh2kwr5mwm4qg9kgotu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. we want to tell the user about errors found during, for instance,
the ui_browser initialization, so that a call to ui__warning() appears
as a window waiting for a key to be pressed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ederrwizcl6mfz10vfobl5qq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate__configs should be sorted so that it can use bsearch(3).
However commit 0c4a5bcea4 ("perf annotate: Display total number of
samples with --show-total-period") added a new config item at the end.
This resulted in the 'annotate.use_offset' config variable cannot be
found and perf terminated like below:
$ perf report
bad config file line 6 in ~/.perfconfig
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1445396240-3428-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With horizontal scrolling, the left/right arrow keys are used to scroll
columns and ENTER/ESC keys are used to enter/exit menu. However if
callchain is recorded, the ENTER key is used to toggle callchain
expansion so there's no way to display menu. Use 'm' key to display the
menu for this case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444694521-8136-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When in the hists browser, i.e. in 'perf report' or in 'perf top', it is
possible to press '/' and specify a substring to filter by symbol name.
Clarify how to remove a filter by making the prompt be:
Please enter the name of symbol you want to see.
To remove the filter later, press / + ENTER
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vbq2b0kyufwy6p0ctkfswcoe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They were repurposed for horizontal scrolling, so use just ENTER/ESC in
the help messages.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: c6c3c02dea ("perf hists browser: Implement horizontal scrolling")
Link: http://lkml.kernel.org/n/tip-n5ar4qg8fs12ax4vhr3rxhxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_hpp__init currently does not respect sorting dimensions and the
setup_sorting function could endup queueing same format twice. That
screwed up the perf_hpp__list and got stuck in loop within
perf_hpp__setup_output_field function.
$ perf report -F +overhead
0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
1506 {
#0 0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
#1 0x00000000004c139d in perf_hpp__same_sort_entry (a=a@entry=0x880440 <perf_hpp.format>, b=b@entry=0x2bb2fe0) at util/sort.c:1380
#2 0x00000000004f8d3c in perf_hpp__setup_output_field () at ui/hist.c:554
#3 0x00000000004c1d1e in setup_sorting () at util/sort.c:1984
#4 0x000000000042efbf in cmd_report (argc=0, argv=0x7ffea5a0e790, prefix=<optimized out>) at builtin-report.c:874
#5 0x0000000000476f13 in run_builtin (p=p@entry=0x875628 <commands+168>, argc=argc@entry=3, argv=argv@entry=0x7ffea5a0e790) at perf.c:385
#6 0x000000000047710b in handle_internal_command (argc=3, argv=0x7ffea5a0e790) at perf.c:445
#7 0x0000000000477176 in run_argv (argcp=argcp@entry=0x7ffea5a0e5fc, argv=argv@entry=0x7ffea5a0e5f0) at perf.c:489
#8 0x00000000004773e7 in main (argc=3, argv=0x7ffea5a0e790) at perf.c:606
Using hpp_dimension__add_output function to register the output column.
It will also mark the dimension as taken and omit above stuck.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do it using the recently introduced ui_brower scrolling mode, setting
ui_browser.columns to the number of sort columns and then, when
rendering each line, skipping as many initial columns as the user
pressed the right arrow.
As the user presses the left arrow, the ui_browser code will remove the
scrolling counter and the left scrolling takes place.
The right arrow key was an alias for ENTER, so people used to press it
may get a bit annoyed at first, sorry! Ditto for ESC and the left key.
Callchains can be left as is or we can, when rendering the Symbol
column, store the at what position on the screen it is and then
using ui_browser__gotorc() to print it from there, i.e. the callchain
would move around with the symbol.
Leaving it as is, i.e. at a fixed position, close to the left, saves
precious screen real state for it, so I'm inclined to leave it as is
now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ccqq9sabgfge5dwbqjwh71ij@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the classes derived from ui_browser want to do some sort of
horizontal scrolling, they have just to set ui_browser->columns to
the number of columns available.
Those columns can be the number of characters on the screen, if what is
desired is to scroll character by character, or the number of columns in
a spreadsheet like table.
This is what the hist_browser will do, skipping ui_browser->horiz_scroll
columns when rendering each of its lines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q6a22bpmpgcr1awgzrmd4jrs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The map is what should say if an ELF (or some other format) image is
being used for some particular purpose, as a kernel, host or guest.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zufousvfar0710p4qj71c32d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf top' segfaults with following operation:
# perf top -e page-faults -p 11400 # 11400 never generates page-fault
Then on the resulting empty interface, press right key:
# ./perf top -e page-faults -p 11400
perf: Segmentation fault
-------- backtrace --------
./perf[0x535428]
/lib64/libc.so.6(+0x3545f)[0x7f0dd360745f]
./perf[0x531d46]
./perf(perf_evlist__tui_browse_hists+0x96)[0x5340d6]
./perf[0x44ba2f]
/lib64/libpthread.so.0(+0x81d0)[0x7f0dd49dc1d0]
/lib64/libc.so.6(clone+0x6c)[0x7f0dd36b90dc]
The bug resides in perf_evsel__hists_browse() that, in the above
circumstance browser->selection can be NULL, but code after
skip_annotation doesn't consider it.
This patch fix it by checking browser->selection before fetching
browser->selection->map.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1442226235-117265-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, users can zoom in/out for threads and dso in 'perf top' and
'perf report'.
This patch extends it for the processor sockets.
'S' is the short key to zoom into current Processor Socket.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1441377946-44429-4-git-send-email-kan.liang@intel.com
[ - Made it elide the Socket column when zooming into it,
just like with the other zoom ops;
- Make it use browser->pstack, to unzoom level by level;
- Rename 'socket' variables to 'socket_id' to make it build on
older systems where it shadows a global glibc declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ce80d3bef9 ("perf tools: Rename perf_session_env to perf_env") we
forgot to rename a few functions to the "perf_env" prefix, do it now.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b3ui3z6ock89z1814pu2er98@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is not necessarily tied to a perf.data file and needs using in
places where a perf_session is not required.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1440755289-30939-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can erase the progress bar after we're done with it, avoiding
things like:
-------------------------------------------------------------------
┌─Error:──────────────────────────────────────────────────────┐
│Can't annotate unmapped_area_topdown: │
│ │
│No vmlinux file with build id a826726b5ddacfab1f0bade868f1a79│
│was found in the path. │
│ │
│Note that annotation using /proc/kcore requires CAP_SYS_RAWIO│
┌Processin│ │──┐
│ │Please use: │ │
└─────────│ │──┘
│ perf buildid-cache -vu vmlinux │
│ │
│or: │
│ │
│ --vmlinux vmlinux │
│ │
│ │
│Press any key... │
└─────────────────────────────────────────────────────────────┘
Can't annotate unmapped_area_topdown:
-------------------------------------------------------------------
I.e. that finished progress bar behind the error window. It is not a
problem when we end up redrawing the whole screen, but its ugly when
we present such error windows, provide a TUI method so that code like
the above may avoid this situation, as will be done with the annotation
code in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qvktnojzwwe37pweging058t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to <-, that may be repurposed for horizontal scrolling.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w3rctelxr4yxrjufx7z3fclb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-w0niblabqrkecs4o0eogfy6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove direct access to libslang functions, with the immediate goal
of implementing horizontal scrolling at the ui_browser level, but also
because we may at some point want to implement ui_browser with other UIs
in addition to the current libslang implementation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-437ineavoejzou727mr9bxpi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add two new columns to the annotate display and display the average
cycles and the compute IPC if available.
When the LBR was not in any branch mode the IPC computation is
automatically disabled. We still display the cycle information.
Example output (with made up numbers):
The second column is the IPC and third average cycles.
│ __attribute__((noinline)) f2()
│ {
5.15 0.07 │ push %rbp
0.01 0.07 │ mov %rsp,%rbp
│ c = a / b;
9.87 0.07 │ mov a,%eax
0.07 │ mov b,%ecx
0.07 │ cltd
4.92 0.07 123│ idiv %ecx
70.79 0.07 │ mov %eax,__TMC_END__
│ }
9.25 0.07 │ pop %rbp
0.01 0.07 123│ ← retq
v2: Fix display problems.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compute the IPC and the basic block cycles for the annotate display.
IPC is computed by counting the instructions, and then dividing the
accounted cycles by that count.
The actual IPC computation can only be done at annotate time, because we
need to parse the objdump output first to know the number of
instructions in the basic block.
The cycles/IPC are also put into the perf function annotation so that
the display code can show them.
Again basic block overlaps are not handled, with the longest winning,
but there are some heuristics to hide the IPC when the longest is not
the most common.
v2: Compute IPC correctly.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1437233094-12844-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At some point:
commit 2c86c7ca76
Author: Namhyung Kim <namhyung@kernel.org>
Date: Mon Mar 17 18:18:54 2014 -0300
perf report: Merge al->filtered with hist_entry->filtered
We stopped dropping samples for things filtered via the --comms, --dsos,
--symbols, etc, i.e. things marked as filtered in the symbol resolution
routines (thread__find_addr_map(), perf_event__preprocess_sample(),
etc).
But then, in:
commit 268397cb2a
Author: Namhyung Kim <namhyung@kernel.org>
Date: Tue Apr 22 14:49:31 2014 +0900
perf top/tui: Update nr_entries properly after a filter is applied
We don't take into account entries that were filtered in
perf_event__preprocess_sample() and friends, which leads to
inconsistency in the browser seek routines, that expects the number of
hist_entry->filtered entries to match what it thinks is the number of
unfiltered, browsable entries.
So, for instance, when we do:
perf top --symbols ___non_existent_symbol___
the hist_browser__nr_entries() routine thinks there are no filters in
place, uses the hists->nr_entries but all entries are filtered, leading
to a segfault.
Tested with:
perf top --symbols malloc,free --percentage=relative
Freezing, by pressing 'f', at any time and doing the math on the
percentages ends up with 100%, ditto for:
perf top --dsos libpthread-2.20.so,libxul.so --percentage=relative
Both were segfaulting, all fixed now.
More work needed to do away with checking if filters are in place, we
should just use the nr_non_filtered_samples counter, no need to
conditionally use it or hists.nr_filter, as what the browser does is
just show unfiltered stuff. An audit of how it is being accounted is
needed, this is the minimal fix.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Fixes: 268397cb2a ("perf top/tui: Update nr_entries properly after a filter is applied")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6w01d5q97qk0d64kuojme5in@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current 'f' key action to enable/disable events won't work if there're
more than one event since perf_evsel_menu__run() doesn't return the key.
So move it to the hists browser loop so that it can be processed as like
other key action, and it's more natural to handle it there IMHO.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1434858076-6533-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When that happens we were just ignoring the key press, now this
message is presented in the bottom line (the help line):
"Press '?' for help on key bindings"
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iyma2j5kj3q9i1stl4mfh90n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hists_browser was replacing whatever helpline provided by 'top' or
'report' with a static "Press '?' for help on key bindings", fix it.
Now the message passed by top appears at the bottom of the screen:
"For a higher level overview, try: perf top --sort comm,dso"
As well the message that will be added when the user presses 'f' to
disable the events, something along the lines of "press f again to
re-enable...".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dacaja70mbfz3a0yj1n180gx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'f' hotkey is only used when in 'top', dynamic mode, to
enable/disable events, currently not making sense in the 'report',
static mode, where we can't go from showing the histogram entries
created from a perf.data file to adding more events after recreating the
evlist created from the perf.data file, albeit possible, this is not
implemented right now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lholzf472pu98dkkijggwx2m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa