Fixes the following W=1 kernel build warning(s):
drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
drivers/net/usb/r8152.c:992: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20201102114512.1062724-28-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/macvlan.c:1350: warning: Function parameter or member 'vlan' not described in 'macvlan_changelink_sources'
drivers/net/macvlan.c:1350: warning: Function parameter or member 'mode' not described in 'macvlan_changelink_sources'
drivers/net/macvlan.c:1350: warning: Function parameter or member 'data' not described in 'macvlan_changelink_sources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-27-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/macsec.c:113: warning: Function parameter or member 'gro_cells' not described in 'macsec_dev'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-26-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/usb/lan78xx.c: In function ‘lan78xx_read_raw_otp’:
drivers/net/usb/lan78xx.c:825:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_write_raw_otp’:
drivers/net/usb/lan78xx.c:879:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_deferred_multicast_write’:
drivers/net/usb/lan78xx.c:1041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_update_flowcontrol’:
drivers/net/usb/lan78xx.c:1127:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_init_mac_address’:
drivers/net/usb/lan78xx.c:1666:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_link_status_change’:
drivers/net/usb/lan78xx.c:1841:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_irq_bus_sync_unlock’:
drivers/net/usb/lan78xx.c:1920:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan8835_fixup’:
drivers/net/usb/lan78xx.c:1994:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_rx_max_frame_length’:
drivers/net/usb/lan78xx.c:2192:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_change_mtu’:
drivers/net/usb/lan78xx.c:2270:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_mac_addr’:
drivers/net/usb/lan78xx.c:2299:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_features’:
drivers/net/usb/lan78xx.c:2333:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_suspend’:
drivers/net/usb/lan78xx.c:3807:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-25-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/ieee802154/ca8210.c:724: warning: Function parameter or member 'cas_ctl' not described in 'ca8210_rx_done'
drivers/net/ieee802154/ca8210.c:724: warning: Excess function parameter 'cas_ctrl' description in 'ca8210_rx_done'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-24-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/usb/r8152.c:934: warning: Function parameter or member 'blk_hdr' not described in 'fw_mac'
drivers/net/usb/r8152.c:934: warning: Function parameter or member 'reserved' not described in 'fw_mac'
drivers/net/usb/r8152.c:947: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_patch_key'
drivers/net/usb/r8152.c:947: warning: Function parameter or member 'reserved' not described in 'fw_phy_patch_key'
drivers/net/usb/r8152.c:986: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_nc'
drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
drivers/net/usb/r8152.c:986: warning: Function parameter or member 'reserved' not described in 'fw_phy_nc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20201102114512.1062724-23-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/ieee802154/ca8210.c:326: warning: Function parameter or member 'readq' not described in 'ca8210_test'
drivers/net/ieee802154/ca8210.c:375: warning: Function parameter or member 'spi_transfer_complete' not described in 'ca8210_priv'
drivers/net/ieee802154/ca8210.c:375: warning: Function parameter or member 'sync_exchange_complete' not described in 'ca8210_priv'
drivers/net/ieee802154/ca8210.c:375: warning: Function parameter or member 'promiscuous' not described in 'ca8210_priv'
drivers/net/ieee802154/ca8210.c:430: warning: Function parameter or member 'short_address' not described in 'macaddr'
drivers/net/ieee802154/ca8210.c:723: warning: Function parameter or member 'cas_ctl' not described in 'ca8210_rx_done'
drivers/net/ieee802154/ca8210.c:723: warning: Excess function parameter 'arg' description in 'ca8210_rx_done'
drivers/net/ieee802154/ca8210.c:1289: warning: Excess function parameter 'device_ref' description in 'tdme_checkpibattribute'
drivers/net/ieee802154/ca8210.c:3054: warning: Function parameter or member 'spi_device' not described in 'ca8210_remove'
drivers/net/ieee802154/ca8210.c:3054: warning: Excess function parameter 'priv' description in 'ca8210_remove'
drivers/net/ieee802154/ca8210.c:3104: warning: Function parameter or member 'spi_device' not described in 'ca8210_probe'
drivers/net/ieee802154/ca8210.c:3104: warning: Excess function parameter 'priv' description in 'ca8210_probe'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-21-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/ess.c:43:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-20-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/drvfbi.c:26:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-19-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/srf.c:30:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-17-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/hwt.c:31:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-16-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/smttimer.c:22:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-15-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/smtinit.c:23:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-12-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/smtdef.c:26:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-11-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/rmt.c:49:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-10-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/queue.c:22:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-9-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/pmf.c:28:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-8-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/pcmplc.c:49:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-4-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This variable is present in many source files and has not been used
anywhere (at least internally) since it was introduced.
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/ecm.c: In function ‘ecm_fsm’:
drivers/net/fddi/skfp/ecm.c:44:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-3-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When AIX_EVENT is not defined, the 'if' body will be empty, which
makes GCC complain. Place bracketing around the invocation to protect
it.
Fixes the following W=1 kernel build warning(s):
drivers/net/fddi/skfp/ecm.c: In function ‘ecm_fsm’:
drivers/net/fddi/skfp/ecm.c:153:29: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102114512.1062724-2-lee.jones@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The nexthop notification chain is a per-namespace chain and not a global
one like the netdev notification chain.
Therefore, a single (global) listener cannot be registered to all these
chains simultaneously as it will result in list corruptions whenever
listeners are registered / unregistered.
Instead, register a different listener in each namespace.
Currently this is not an issue because only the VXLAN driver registers a
listener to this chain, but this is going to change with netdevsim and
mlxsw also registering their own listeners.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201101113926.705630-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xie He says:
====================
net: hdlc_fr: Improve fr_rx and add support for any Ethertype
The main purpose of this series is the last patch. The previous 4 patches
are just code clean-ups so that the last patch will not make the code too
messy. The patches must be applied in sequence.
The receiving code of this driver doesn't support arbitrary Ethertype
values. It only recognizes a few known Ethertypes when receiving and drops
skbs with other Ethertypes.
However, the standard document RFC 2427 allows Frame Relay to support any
Ethertype values. This series adds support for this.
Change from v6:
Remove the explanation about why only a 2-byte address field is accepted
because I think it is inadequate and unnecessary.
Change from v5:
Small fix to the commit messages.
Change from v4:
Drop the change related to the stats.rx_dropped count.
Improve the commit message by stating why only a 2-byte address field
is accepted.
Change from v3:
Split the last patch into 2 patches.
Improve the commit message about the stats.rx_dropped count.
Change from v2:
Small fix to the commit messages.
Change from v1:
Small fix to the commit messages.
====================
Link: https://lore.kernel.org/r/20201031181043.805329-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the fr_rx function to make this driver support any Ethertype
when receiving skbs on normal (non-Ethernet-emulating) PVC devices.
(This driver is already able to handle any Ethertype when sending.)
Originally in the fr_rx function, the code that parses the long (10-byte)
header only recognizes a few Ethertype values and drops frames with other
Ethertype values. This patch replaces this code to make fr_rx support
any Ethertype. This patch also creates a new function fr_snap_parse as
part of the new code.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1.
Change the skb->len check from "<= 4" to "< 4".
At first we only need to ensure a 4-byte header is present. We indeed
normally need the 5th byte, too, but it'd be more logical and cleaner
to check its existence when we actually need it.
2.
Add an fh->ea2 check to the initial checks in fr_rx. fh->ea2 == 1 means
the second address byte is the final address byte. We only support the
case where the address length is 2 bytes.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an skb is received on a normal (non-Ethernet-emulating) PVC device,
call skb_reset_mac_header before we pass it to upper layers.
This is because normal PVC devices don't have header_ops, so any header we
have would not be visible to upper layer code when sending, so the header
shouldn't be visible to upper layer code when receiving, either.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The eth_type_trans function is called when we receive frames carrying
Ethernet frames. This function expects a non-NULL pointer as an argument,
and assigns it directly to skb->dev.
However, the code handling other types of frames first assigns the pointer
to "dev", and then at the end checks whether the value is NULL, and if it
is not NULL, assigns it to skb->dev.
The two flows are different. Mixing them in this function makes the code
messy. It's better that we convert the second flow to align with how
eth_type_trans does things.
So this patch changes the code to: first make sure the pointer is not
NULL, then assign it directly to skb->dev. "dev" is no longer needed until
the end where we use it to update stats.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the fr_rx function drops a received frame (because the protocol type
is not supported, or because the PVC virtual device that corresponds to
the DLCI number and the protocol type doesn't exist), the function frees
the skb and returns.
The code for freeing the skb and returning is repeated several times, this
patch uses "goto rx_drop" to replace them so that the code looks cleaner.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b27507bb59 ("net/ibmvnic: unlock rtnl_lock in reset so
linkwatch_event can run") introduced do_change_param_reset function to
solve the rtnl lock issue. Majority of the code in do_change_param_reset
duplicates do_reset. Also, we can handle the rtnl lock issue in do_reset
itself. Hence merge do_change_param_reset back into do_reset to clean up
the code.
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201031094645.17255-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 394de110a7 ("net: Added pointer check for
dst->ops->neigh_lookup in dst_neigh_lookup_skb") added a test in
dst_neigh_lookup_skb() to avoid a NULL pointer dereference. The root
cause was the MPLS forwarding code, which doesn't call skb_dst_drop()
on incoming packets. That is, if the packet is received from a
collect_md device, it has a metadata_dst attached to it that doesn't
implement any dst_ops function.
To align the MPLS behaviour with IPv4 and IPv6, let's drop the dst in
mpls_forward(). This way, dst_neigh_lookup_skb() doesn't need to test
->neigh_lookup any more. Let's keep a WARN condition though, to
document the precondition and to ease detection of such problems in the
future.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/f8c2784c13faa54469a2aac339470b1049ca6b63.1604102750.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aleksandr Nogikh says:
====================
net, mac80211, kernel: enable KCOV remote coverage collection for 802.11 frame handling
This patch series enables remote KCOV coverage collection during
802.11 frames processing. These changes make it possible to perform
coverage-guided fuzzing in search of remotely triggerable bugs.
Normally, KCOV collects coverage information for the code that is
executed inside the system call context. It is easy to identify where
that coverage should go and whether it should be collected at all by
looking at the current process. If KCOV was enabled on that process,
coverage will be stored in a buffer specific to that process.
Howerever, it is not always enough as handling can happen elsewhere
(e.g. in separate kernel threads).
When it is impossible to infer KCOV-related info just by looking at
the currently running process, one needs to manually pass some
information to the code that should be instrumented. The information
takes the form of 64 bit integers (KCOV remote handles). Zero is the
special value that corresponds to an empty handle. More details on
KCOV and remote coverage collection can be found in
Documentation/dev-tools/kcov.rst.
The series consists of three commits.
1. Apply a minor fix to kcov_common_handle() so that it returns a
valid handle (zero) when called in an interrupt context.
2. Take the remote handle from KCOV and attach it to newly allocated
SKBs as an skb extension. If the allocation happens inside a system
call context, the SKB will be tied to the process that issued the
syscall (if that process is interested in remote coverage collection).
3. Annotate the code that processes incoming 802.11 frames with
kcov_remote_start()/kcov_remote_stop().
v5:
* Collecting remote coverate at ieee80211_rx_list() instead of
ieee80211_rx()
v4:
https://lkml.kernel.org/r/20201028182018.1780842-1-aleksandrnogikh@gmail.com
* CONFIG_SKB_EXTENSIONS is now automatically selected by CONFIG_KCOV.
* Elaborated on a minor optimization in skb_set_kcov_handle().
v3:
https://lkml.kernel.org/r/20201026150851.528148-1-aleksandrnogikh@gmail.com
* kcov_handle is now stored in skb extensions instead of sk_buff
itself.
* Updated the cover letter.
v2:
https://lkml.kernel.org/r/20201009170202.103512-1-a.nogikh@gmail.com
* Moved KCOV annotations from ieee80211_tasklet_handler to
ieee80211_rx.
* Updated kcov_common_handle() to return 0 if it is called in
interrupt context.
* Updated the cover letter.
v1:
https://lkml.kernel.org/r/20201007101726.3149375-1-a.nogikh@gmail.com
====================
Link: https://lore.kernel.org/r/20201029173620.2121359-1-aleksandrnogikh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add KCOV remote annotations to ieee80211_iface_work() and
ieee80211_rx_list(). This will enable coverage-guided fuzzing of
mac80211 code that processes incoming 802.11 frames.
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remote KCOV coverage collection enables coverage-guided fuzzing of the
code that is not reachable during normal system call execution. It is
especially helpful for fuzzing networking subsystems, where it is
common to perform packet handling in separate work queues even for the
packets that originated directly from the user space.
Enable coverage-guided frame injection by adding kcov remote handle to
skb extensions. Default initialization in __alloc_skb and
__build_skb_around ensures that no socket buffer that was generated
during a system call will be missed.
Code that is of interest and that performs packet processing should be
annotated with kcov_remote_start()/kcov_remote_stop().
An alternative approach is to determine kcov_handle solely on the
basis of the device/interface that received the specific socket
buffer. However, in this case it would be impossible to distinguish
between packets that originated during normal background network
processes or were intentionally injected from the user space.
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kcov_common_handle is a method that is used to obtain a "default" KCOV
remote handle of the current process. The handle can later be passed
to kcov_remote_start in order to collect coverage for the processing
that is initiated by one process, but done in another. For details see
Documentation/dev-tools/kcov.rst and comments in kernel/kcov.c.
Presently, if kcov_common_handle is called in an IRQ context, it will
return a handle for the interrupted process. This may lead to
unreliable and incorrect coverage collection.
Adjust the behavior of kcov_common_handle in the following way. If it
is called in a task context, return the common handle for the
currently running task. Otherwise, return 0.
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
Generic TX reallocation for DSA
Christian has reported buggy usage of skb_put() in tag_ksz.c, which is
only triggerable in real life using his not-yet-published patches for
IEEE 1588 timestamping on Micrel KSZ switches.
The concrete problem there is that the driver can end up calling
skb_put() and exceed the end of the skb data area, because even though
it had reallocated the frame once before, it hadn't reallocated it large
enough. Christian explained it in more detail here:
https://lore.kernel.org/netdev/20201014161719.30289-1-ceggers@arri.de/https://lore.kernel.org/netdev/20201016200226.23994-1-ceggers@arri.de/
But actually there's a bigger problem, which is that some taggers which
get more rarely tested tend to do some shenanigans which are uncaught
for the longest time, and in the meanwhile, their code gets copy-pasted
into other taggers, creating a mess. For example, the tail tagging
driver for Marvell 88E6060 currently reallocates _every_single_frame_ on
TX. Is that an obvious indication that nobody is using it? Sure. Is it a
good model to follow when developing a new tail tagging driver? No.
DSA has all the information it needs in order to simplify the job of a
tagger on TX. It knows whether it's a normal or a tail tagger, and what
is the protocol overhead it incurs. So this series performs the
reallocation centrally.
Changes in v3:
- Use dev_kfree_skb_any due to potential hardirq context in xmit path.
Changes in v2:
- Dropped the tx_realloc counters for now, since the patch was pretty
controversial and I lack the time at the moment to introduce new UAPI
for that.
- Do padding for tail taggers irrespective of whether they need to
reallocate the skb or not.
====================
Link: https://lore.kernel.org/r/20201101191620.589272-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Cc: Per Forlin <per.forlin@axis.com>
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
This one is interesting, the DSA tag is 8 bytes on RX and 4 bytes on TX.
Because DSA is unaware of asymmetrical tag lengths, the overhead/needed
headroom is declared as 8 bytes and therefore 4 bytes larger than it
needs to be. If this becomes a problem, and the GSWIP driver can't be
converted to a uniform header length, we might need to make DSA aware of
separate RX/TX overhead values.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Similar to the EtherType DSA tagger, the old Marvell tagger can
transform an 802.1Q header if present into a DSA tag, so there is no
headroom required in that case. But we are ensuring that it exists,
regardless (practically speaking, the headroom must be 4 bytes larger
than it needs to be).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Note that the VLAN code path needs a smaller extra headroom than the
regular EtherType DSA path. That isn't a problem, because this tagger
declares the larger tag length (8 bytes vs 4) as the protocol overhead,
so we are covered in both cases.
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have a central TX reallocation procedure that accounts for
the tagger's needed headroom in a generic way, we can remove the
skb_cow_head call.
Cc: John Crispin <john@phrozen.org>
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The caller (dsa_slave_xmit) guarantees that the frame length is at least
ETH_ZLEN and that enough memory for tail tagging is available.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lee Jones