The events in the same group don't start or stop simultaneously.
Here is the ftrace when enabling event group for uncore_iio_0:
# perf stat -e "{uncore_iio_0/event=0x1/,uncore_iio_0/event=0xe/}"
<idle>-0 [000] d.h. 8959.064832: read_msr: a41, value
b2b0b030 //Read counter reg of IIO unit0 counter0
<idle>-0 [000] d.h. 8959.064835: write_msr: a48, value
400001 //Write Ctrl reg of IIO unit0 counter0 to enable
counter0. <------ Although counter0 is enabled, Unit Ctrl is still
freezed. Nothing will count. We are still good here.
<idle>-0 [000] d.h. 8959.064836: read_msr: a40, value
30100 //Read Unit Ctrl reg of IIO unit0
<idle>-0 [000] d.h. 8959.064838: write_msr: a40, value
30000 //Write Unit Ctrl reg of IIO unit0 to enable all
counters in the unit by clear Freeze bit <------Unit0 is un-freezed.
Counter0 has been enabled. Now it starts counting. But counter1 has not
been enabled yet. The issue starts here.
<idle>-0 [000] d.h. 8959.064846: read_msr: a42, value 0
//Read counter reg of IIO unit0 counter1
<idle>-0 [000] d.h. 8959.064847: write_msr: a49, value
40000e //Write Ctrl reg of IIO unit0 counter1 to enable
counter1. <------ Now, counter1 just starts to count. Counter0 has
been running for a while.
Current code un-freezes the Unit Ctrl right after the first counter is
enabled. The subsequent group events always loses some counter values.
Implement pmu_enable and pmu_disable support for uncore, which can help
to batch hardware accesses.
No one uses uncore_enable_box and uncore_disable_box. Remove them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-drivers-review@eclists.intel.com
Cc: linux-perf@eclists.intel.com
Fixes: 087bfbb032 ("perf/x86: Add generic Intel uncore PMU support")
Link: https://lkml.kernel.org/r/1572014593-31591-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
IMC uncore unit can only be accessed via MMIO on Snow Ridge.
The MMIO space of IMC uncore is at the specified offsets from the
MEM0_BAR. Add snr_uncore_get_mc_dev() to locate the PCI device with
MMIO_BASE and MEM0_BAR register.
Add new ops to access the IMC registers via MMIO.
Add 3 new free running counters for clocks, read and write bandwidth.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-7-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The client IMC block is accessed by MMIO. Current code uses an informal
way to access the block, which is not recommended.
Clean up the code by using __iomem annotation and the accessor
functions (read[lq]()).
Move exit_box() and read_counter() to generic code, which can be shared
with the server code later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A new MMIO type uncore box is introduced on Snow Ridge server. The
counters of MMIO type uncore box can only be accessed by MMIO.
Add a new uncore type, uncore_mmio_uncores, for MMIO type uncore blocks.
Support MMIO type uncore blocks in CPU hot plug. The MMIO space has to
be map/unmap for the first/last CPU. The context also need to be
migrated if the bind CPU changes.
Add mmio_init() to init and register PMUs for MMIO type uncore blocks.
Add a helper to calculate the box_ctl address.
The helpers which calculate ctl/ctr can be shared with PCI type uncore
blocks.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The uncore subsystem on Snow Ridge is similar as previous SKX server.
The uncore units on Snow Ridge include Ubox, Chabox, IIO, IRP, M2PCIE,
PCU, M2M, PCIE3 and IMC.
- The config register encoding and pci device IDs are changed.
- For CHA, the umask_ext and filter_tid fields are changed.
- For IIO, the ch_mask and fc_mask fields are changed.
- For M2M, the mask_ext field is changed.
- Add new PCIe3 unit for PCIe3 root port which provides the interface
between PCIe devices, plugged into the PCIe port, and the components
(in M2IOSF).
- IMC can only be accessed via MMIO on Snow Ridge now. Current common
code doesn't support it yet. IMC will be supported in following
patches.
- There are 9 free running counters for IIO CLOCKS and bandwidth In.
- Full uncore event list is not published yet. Event constrain is not
included in this patch. It will be added later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lkml.kernel.org/r/1556672028-119221-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Counting with invalid event coding for free-running counter may cause
OOPs, e.g. uncore_iio_free_running_0/event=1/.
Current code only validate the event with free-running event format,
event=0xff,umask=0xXY. Non-free-running event format never be checked
for the PMU with free-running counters.
Add generic hw_config() to check and reject the invalid event coding
for free-running PMU.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Fixes: 0f519f0352 ("perf/x86/intel/uncore: Support IIO free-running counters on SKX")
Link: https://lkml.kernel.org/r/1556672028-119221-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Syntax update only -- no logical or functional change.
In response to the new multi-die/package changes, update variable names to
use "die" terminology, instead of "pkg".
For previous platforms which doesn't have multi-die, "die" is identical as
"pkg".
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/f0ea5e501288329135e94f51969ff54a03c50e2e.1557769318.git.len.brown@intel.com
Add Intel Icelake uncore support:
- The init code is based on Skylake
- Add new PCI id for IMC
- New MSR address for CBOX
- Get CBOX# from CNL_UNC_CBO_CONFIG MSR directly
- Create a new PMU for fixed clocktick counter
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-13-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The client IMC bandwidth events currently return very large values:
$ perf stat -e uncore_imc/data_reads/ -e uncore_imc/data_writes/ -I 10000 -a
10.000117222 34,788.76 MiB uncore_imc/data_reads/
10.000117222 8.26 MiB uncore_imc/data_writes/
20.000374584 34,842.89 MiB uncore_imc/data_reads/
20.000374584 10.45 MiB uncore_imc/data_writes/
30.000633299 37,965.29 MiB uncore_imc/data_reads/
30.000633299 323.62 MiB uncore_imc/data_writes/
40.000891548 41,012.88 MiB uncore_imc/data_reads/
40.000891548 6.98 MiB uncore_imc/data_writes/
50.001142480 1,125,899,906,621,494.75 MiB uncore_imc/data_reads/
50.001142480 6.97 MiB uncore_imc/data_writes/
The client IMC events are freerunning counters. They still use the
old event encoding format (0x1 for data_read and 0x2 for data write).
The counter bit width is calculated by common code, which assume that
the standard encoding format is used for the freerunning counters.
Error bit width information is calculated.
The patch intends to convert the old client IMC event encoding to the
standard encoding format.
Current common code uses event->attr.config which directly copy from
user space. We should not implicitly modify it for a converted event.
The event->hw.config is used to replace the event->attr.config in
common code.
For client IMC events, the event->attr.config is used to calculate a
converted event with standard encoding format in the custom
event_init(). The converted event is stored in event->hw.config.
For other events of freerunning counters, they already use the standard
encoding format. The same value as event->attr.config is assigned to
event->hw.config in common event_init().
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org # v4.18+
Fixes: 9aae1780e7 ("perf/x86/intel/uncore: Clean up client IMC uncore")
Link: https://lkml.kernel.org/r/20190227165729.1861-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Coffee Lake has 8 core products which has 8 Cboxes. The 8th CBOX is
mapped into different MSR space.
Increase the num_boxes to 8 to handle the new products. It will not
impact the previous platforms, SkyLake, KabyLake and earlier CoffeeLake.
Because the num_boxes will be recalculated in uncore_cpu_init and
doesn't exceed the x86_max_cores.
Introduce a new box flag bit to indicate the 8th CBOX.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20181019170419.378-2-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Masayoshi Mizuma reported that a warning message is shown while a CPU is
hot-removed on Broadwell servers:
WARNING: CPU: 126 PID: 6 at arch/x86/events/intel/uncore.c:988
uncore_pci_remove+0x10b/0x150
Call Trace:
pci_device_remove+0x42/0xd0
device_release_driver_internal+0x148/0x220
pci_stop_bus_device+0x76/0xa0
pci_stop_root_bus+0x44/0x60
acpi_pci_root_remove+0x1f/0x80
acpi_bus_trim+0x57/0x90
acpi_bus_trim+0x2e/0x90
acpi_device_hotplug+0x2bc/0x4b0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x174/0x3a0
worker_thread+0x4c/0x3d0
kthread+0xf8/0x130
This bug was introduced by:
commit 15a3e845b0 ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")
The index of "QPI Port 2 filter" was hardcode to 2, but this conflicts with the
index of "PCU.3" which is "HSWEP_PCI_PCU_3", which equals to 2 as well.
To fix the conflict, the hardcoded index needs to be cleaned up:
- introduce a new enumerator "BDX_PCI_QPI_PORT2_FILTER" for "QPI Port 2
filter" on Broadwell,
- increase UNCORE_EXTRA_PCI_DEV_MAX by one,
- clean up the hardcoded index.
Debugged-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: msys.mizuma@gmail.com
Cc: stable@vger.kernel.org
Fixes: 15a3e845b0 ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs")
Link: http://lkml.kernel.org/r/1532953688-15008-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some uncores have customized PMU. For customized PMU, it does not need
to customize everything. For example, it only needs to customize init()
function for client IMC uncore. Other functions like
add()/del()/start()/stop()/read() can use generic code.
Expose the uncore_pmu_event_add/del/start/stop() functions.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1525371913-10597-7-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are a number of free running counters introduced for uncore, which
provide highly valuable information to a wide array of customers.
For example, Skylake Server has IIO free running counters to collect
Input/Output x BW/Utilization.
There is NO event available on the general purpose counters, that is
exactly the same as the free running counters. The generic uncore code
needs to be enhanced to support the new counters.
In the uncore document, there is no event-code assigned to free running
counters. Some events need to be defined to indicate the free running
counters. The events are encoded as event-code + umask-code.
The event-code for all free running counters is 0xff, which is the same
as the fixed counters:
- It has not been decided what code will be used for common events on
future platforms. 0xff is the only one which will definitely not be
used as any common event-code.
- Cannot re-use current events on the general purpose counters. Because
there is NO event available, that is exactly the same as the free
running counters.
- Even in the existing codes, the fixed counters for core, that have the
same event-code, may count different things. Hence, it should not
surprise the users if the free running counters that share the same
event-code also count different things.
Umask will be used to distinguish the counters.
The umask-code is used to distinguish a fixed counter and a free running
counter, and different types of free running counters.
For fixed counters, the umask-code is 0x0X, where X indicates the index
of the fixed counter, which starts from 0.
- Compatible with the old event encoding.
- Currently, there is only one fixed counter. There are still 15
reserved spaces for extension.
For free running counters, the umask-code uses the rest of the space.
It would follow the format of 0xXY:
- X stands for the type of free running counters, which starts from 1.
- Y stands for the index of free running counters of same type, which
starts from 0.
- The free running counters do different thing. It can be categorized to
several types, according to the MSR location, bit width and
definition. E.g. there are three types of IIO free running counters on
Skylake server to monitor IO CLOCKS, BANDWIDTH and UTILIZATION on
different ports. It makes it easy to locate the free running counter
of a specific type.
- So far, there are at most 8 counters of each type. There are still 8
reserved spaces for extension.
Introducing a new index to indicate the free running counters. Only one
index is enough for all free running counters. Because the free running
counters are always active, and the event and free running counter are
always 1:1 mapped, it does not need extra index to indicate the assigned
counter.
Introducing a new data structure to store free running counters related
information for each type. It includes the number of counters, bit
width, base address, offset between counters and offset between boxes.
Introducing several inline helpers to check index for fixed counter and
free running counter, validate free running counter event, and retrieve
the free running counter information according to box and event.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1525371913-10597-4-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SNB-EP uncore driver is the only user of topology_phys_to_logical_pkg
in a performance critical path.
Change it query the logical pkg ID only once at initialization time and
then cache it in box structure. This allows to change the logical package
management without affecting the performance critical path.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: He Chen <he.chen@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Piotr Luc <piotr.luc@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20171114124257.22013-2-prarit@redhat.com
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update to the new file paths, remove them from introductory comments.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170218113140.8051-1-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch implements the uncore monitoring driver for Skylake server.
The uncore subsystem in Skylake server is similar to previous
server. There are some differences in config register encoding and pci
device IDs. Besides, Skylake introduces many new boxes to reflect the
MESH architecture changes.
The control registers for IIO and UPI have been extended to 64 bit. This
patch also introduces event_mask_ext to handle the high 32 bit mask.
The CHA box number could vary for different machines. This patch gets
the CHA box number by counting the CHA register space during
initialization at runtime.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1471378190-17276-3-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The offset of the counters for UPI and M2M boxes on Skylake server is
non-standard (8 bytes apart).
This patch introduces a custom flag UNCORE_BOX_FLAG_CTL_OFFS8 to
specially handle it.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1471378190-17276-2-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 header cleanups from Ingo Molnar:
"This tree is a cleanup of the x86 tree reducing spurious uses of
module.h - which should improve build performance a bit"
* 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, crypto: Restore MODULE_LICENSE() to glue_helper.c so it loads
x86/apic: Remove duplicated include from probe_64.c
x86/ce4100: Remove duplicated include from ce4100.c
x86/headers: Include spinlock_types.h in x8664_ksyms_64.c for missing spinlock_t
x86/platform: Delete extraneous MODULE_* tags fromm ts5500
x86: Audit and remove any remaining unnecessary uses of module.h
x86/kvm: Audit and remove any unnecessary uses of module.h
x86/xen: Audit and remove any unnecessary uses of module.h
x86/platform: Audit and remove any unnecessary uses of module.h
x86/lib: Audit and remove any unnecessary uses of module.h
x86/kernel: Audit and remove any unnecessary uses of module.h
x86/mm: Audit and remove any unnecessary uses of module.h
x86: Don't use module.h just for AUTHOR / LICENSE tags
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig. In the case of
some of these which are modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h was the source for init.h (for __init) and for
export.h (for EXPORT_SYMBOL) we consider each instance for the
presence of either and replace as needed.
In the case of crypto/glue_helper.c we delete a redundant instance
of MODULE_LICENSE in order to delete module.h -- the license info
is already present at the top of the file.
The uncore change warrants a mention too; it is uncore.c that uses
module.h and not uncore.h; hence the relocation done there.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160714001901.31603-9-paul.gortmaker@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds full support for Intel SKL client uncore PMU:
- Add support for SKL client CPU uncore PMU, which is similar to the
BDW client PMU driver. (There are some differences in CBOX numbering
and uncore control MSR.)
- Add new support for SkyLake Mobile uncore PMUs, for both CPU and PCI
uncore functionality.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1467208912-8179-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some platforms, e.g. Knights Landing, use a common PCI device ID for
multiple instances of an uncore PMU device type. So it is impossible to
locate the specific instances only by PCI device ID.
The current code specially handles Knights Landing by arbitrarily pointing
an instance to an unused uncore box. However, we still have no idea
which uncore device is mapped to which box.
Furthermore, there could be more platforms which use a common PCI device ID
for uncore devices. We have to specially handle them one by one.
This patch records full device information (slot, func, and device ID)
in id_table[]. So the probe function can point the instance to a specific
uncore box by checking the full device information.
Tested-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: tglx@linutronix.de
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@suse.de
Cc: harish.chegondi@intel.com
Cc: hubert.chrzaniuk@intel.com
Cc: lawrence.f.meadows@intel.com
Link: http://lkml.kernel.org/r/1463379504-39003-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
cf6d445f68 ("perf/x86/uncore: Track packages, not per CPU data")
reorganized the uncore code to track packages, and introduced a dependency
on MAX_APIC_ID. This constant is not available on UP-IOAPIC builds:
arch/x86/events/intel/uncore.c:1350:44: error: 'MAX_LOCAL_APIC' undeclared here (not in a function)
Include asm/apicdef.h explicitly to pick it up.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Uncore is a per package facility, but the code tries to mimick a per CPU
facility with completely convoluted constructs.
Simplify the whole machinery by tracking per package information. While at it,
avoid the kfree/alloc dance when a CPU goes offline and online again. There is
no point in freeing the box after it was allocated. We just keep proper
refcounting and the first CPU which comes online in a package does the
initialization/activation of the box.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160222221011.622258933@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Store the PMU pointer in event->pmu_private, so we can get rid of the
per CPU data storage.
We keep it after converting to per package data, because a CPU to
package lookup will be 3 loads versus one and these usage sites are
in the perf fast path.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160222221011.460851335@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When tearing down the boxes nothing undoes the hardware state which was setup
by box->init_box(). Add a box->exit_box() callback and implement it for the
uncores which have an init_box() callback.
This misses the cleanup in the error exit pathes, but I cannot be bothered to
implement it before cleaning up the rest of the driver, which makes that task
way simpler.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160222221011.023930023@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This driver lacks any form of proper error handling. If initialization fails
or hotplug prepare fails, it lets the facility with half initialized stuff
around.
Fix the state and memory leaks in a first step. As a second step we need to
undo the hardware state which is set via uncore_box_init() on some of the
uncore implementations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160222221010.848880559@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that all functionality has been moved to arch/x86/events/, move the
perf_event.h header and adjust include paths.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1455098123-11740-18-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang