The kmalloc* functions of all slab allcoators are similar now so
lets move them into slab.h. This requires some function naming changes
in slob.
As a results of this patch there is a common set of functions for
all allocators. Also means that kmalloc_large() is now available
in general to perform large order allocations that go directly
via the page allocator. kmalloc_large() can be substituted if
kmalloc() throws warnings because of too large allocations.
kmalloc_large() has exactly the same semantics as kmalloc but
can only used for allocations > PAGE_SIZE.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Size is usually below than KMALLOC_MAX_SIZE.
If we add a 'unlikely' macro, compiler can make better code.
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Pull slab update from Pekka Enberg:
"Highlights:
- Fix for boot-time problems on some architectures due to
init_lock_keys() not respecting kmalloc_caches boundaries
(Christoph Lameter)
- CONFIG_SLUB_CPU_PARTIAL requested by RT folks (Joonsoo Kim)
- Fix for excessive slab freelist draining (Wanpeng Li)
- SLUB and SLOB cleanups and fixes (various people)"
I ended up editing the branch, and this avoids two commits at the end
that were immediately reverted, and I instead just applied the oneliner
fix in between myself.
* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
slub: Check for page NULL before doing the node_match check
mm/slab: Give s_next and s_stop slab-specific names
slob: Check for NULL pointer before calling ctor()
slub: Make cpu partial slab support configurable
slab: add kmalloc() to kernel API documentation
slab: fix init_lock_keys
slob: use DIV_ROUND_UP where possible
slub: do not put a slab to cpu partial list when cpu_partial is 0
mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo
mm/slub: Drop unnecessary nr_partials
mm/slab: Fix /proc/slabinfo unwriteable for slab
mm/slab: Sharing s_next and s_stop between slab and slub
mm/slab: Fix drain freelist excessively
slob: Rework #ifdeffery in slab.h
mm, slab: moved kmem_cache_alloc_node comment to correct place
Give s_next and s_stop slab-specific names instead of exporting
"s_next" and "s_stop".
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Slab have some tunables like limit, batchcount, and sharedfactor can be
tuned through function slabinfo_write. Commit (b7454ad3: mm/sl[au]b: Move
slabinfo processing to slab_common.c) uncorrectly change /proc/slabinfo
unwriteable for slab, this patch fix it by revert to original mode.
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
This patch shares s_next and s_stop between slab and slub.
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Sasha Levin noticed that the warning introduced by commit 6286ae9
("slab: Return NULL for oversized allocations) is being triggered:
WARNING: CPU: 15 PID: 21519 at mm/slab_common.c:376 kmalloc_slab+0x2f/0xb0()
can: request_module (can-proto-4) failed.
mpoa: proc_mpc_write: could not parse ''
Modules linked in:
CPU: 15 PID: 21519 Comm: trinity-child15 Tainted: G W 3.10.0-rc4-next-20130607-sasha-00011-gcd78395-dirty #2
0000000000000009 ffff880020a95e30 ffffffff83ff4041 0000000000000000
ffff880020a95e68 ffffffff8111fe12 fffffffffffffff0 00000000000082d0
0000000000080000 0000000000080000 0000000001400000 ffff880020a95e78
Call Trace:
[<ffffffff83ff4041>] dump_stack+0x4e/0x82
[<ffffffff8111fe12>] warn_slowpath_common+0x82/0xb0
[<ffffffff8111fe55>] warn_slowpath_null+0x15/0x20
[<ffffffff81243dcf>] kmalloc_slab+0x2f/0xb0
[<ffffffff81278d54>] __kmalloc+0x24/0x4b0
[<ffffffff8196ffe3>] ? security_capable+0x13/0x20
[<ffffffff812a26b7>] ? pipe_fcntl+0x107/0x210
[<ffffffff812a26b7>] pipe_fcntl+0x107/0x210
[<ffffffff812b7ea0>] ? fget_raw_light+0x130/0x3f0
[<ffffffff812aa5fb>] SyS_fcntl+0x60b/0x6a0
[<ffffffff8403ca98>] tracesys+0xe1/0xe6
Andrew Morton writes:
__GFP_NOWARN is frequently used by kernel code to probe for "how big
an allocation can I get". That's a bit lame, but it's used on slow
paths and is pretty simple.
However, SLAB would still spew a warning when a big allocation happens
if the __GFP_NOWARN flag is _not_ set to expose kernel bugs.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[ penberg@kernel.org: improve changelog ]
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Commit 8a965b3baa ("mm, slab_common: Fix bootstrap creation of kmalloc
caches") introduced a regression that caused us to crash early during
boot. The commit was introducing ordering of slab creation, making sure
two odd-sized slabs were created after specific powers of two sizes.
But, if any of the power of two slabs were created earlier during boot,
slabs at index 1 or 2 might not get created at all. This patch makes
sure none of the slabs get skipped.
Tony Lindgren bisected this down to the offending commit, which really
helped because bisect kept bringing me to almost but not quite this one.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For SLAB the kmalloc caches must be created in ascending sizes in order
for the OFF_SLAB sub-slab cache to work properly.
Create the non power of two caches immediately after the prior power of
two kmalloc cache. Do not create the non power of two caches before all
other caches.
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Christoph Lamete <cl@linux.com>
Link: http://lkml.kernel.org/r/201305040348.CIF81716.OStQOHFJMFLOVF@I-love.SAKURA.ne.jp
Signed-off-by: Pekka Enberg <penberg@kernel.org>
The inline path seems to have changed the SLAB behavior for very large
kmalloc allocations with commit e3366016 ("slab: Use common
kmalloc_index/kmalloc_size functions"). This patch restores the old
behavior but also adds diagnostics so that we can figure where in the
code these large allocations occur.
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Christoph Lameter <cl@linux.com>
Link: http://lkml.kernel.org/r/201305040348.CIF81716.OStQOHFJMFLOVF@I-love.SAKURA.ne.jp
[ penberg@kernel.org: use WARN_ON_ONCE ]
Signed-off-by: Pekka Enberg <penberg@kernel.org>
commit "slab: Common Kmalloc cache determination" made mistake
in kmalloc_slab(). SLAB_CACHE_DMA is for kmem_cache creation,
not for allocation. For allocation, we should use GFP_XXX to identify
type of allocation. So, change SLAB_CACHE_DMA to GFP_DMA.
Acked-by: Christoph Lameter <cl@linux.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Extract the optimized lookup functions from slub and put them into
slab_common.c. Then make slab use these functions as well.
Joonsoo notes that this fixes some issues with constant folding which
also reduces the code size for slub.
https://lkml.org/lkml/2012/10/20/82
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
The kmalloc array is created in similar ways in both SLAB
and SLUB. Create a common function and have both allocators
call that function.
V1->V2:
Whitespace cleanup
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Have a common definition fo the kmalloc cache arrays in
SLAB and SLUB
Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
SLAB allows us to tune a particular cache behavior with tunables. When
creating a new memcg cache copy, we'd like to preserve any tunables the
parent cache already had.
This could be done by an explicit call to do_tune_cpucache() after the
cache is created. But this is not very convenient now that the caches are
created from common code, since this function is SLAB-specific.
Another method of doing that is taking advantage of the fact that
do_tune_cpucache() is always called from enable_cpucache(), which is
called at cache initialization. We can just preset the values, and then
things work as expected.
It can also happen that a root cache has its tunables updated during
normal system operation. In this case, we will propagate the change to
all caches that are already active.
This change will require us to move the assignment of root_cache in
memcg_params a bit earlier. We need this to be already set - which
memcg_kmem_register_cache will do - when we reach __kmem_cache_create()
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we create caches in memcgs, we need to display their usage
information somewhere. We'll adopt a scheme similar to /proc/meminfo,
with aggregate totals shown in the global file, and per-group information
stored in the group itself.
For the time being, only reads are allowed in the per-group cache.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This enables us to remove all the children of a kmem_cache being
destroyed, if for example the kernel module it's being used in gets
unloaded. Otherwise, the children will still point to the destroyed
parent.
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every cache that is considered a root cache (basically the "original"
caches, tied to the root memcg/no-memcg) will have an array that should be
large enough to store a cache pointer per each memcg in the system.
Theoreticaly, this is as high as 1 << sizeof(css_id), which is currently
in the 64k pointers range. Most of the time, we won't be using that much.
What goes in this patch, is a simple scheme to dynamically allocate such
an array, in order to minimize memory usage for memcg caches. Because we
would also like to avoid allocations all the time, at least for now, the
array will only grow. It will tend to be big enough to hold the maximum
number of kmem-limited memcgs ever achieved.
We'll allocate it to be a minimum of 64 kmem-limited memcgs. When we have
more than that, we'll start doubling the size of this array every time the
limit is reached.
Because we are only considering kmem limited memcgs, a natural point for
this to happen is when we write to the limit. At that point, we already
have set_limit_mutex held, so that will become our natural synchronization
mechanism.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow a memcg parameter to be passed during cache creation. When the slub
allocator is being used, it will only merge caches that belong to the same
memcg. We'll do this by scanning the global list, and then translating
the cache to a memcg-specific cache
Default function is created as a wrapper, passing NULL to the memcg
version. We only merge caches that belong to the same memcg.
A helper is provided, memcg_css_id: because slub needs a unique cache name
for sysfs. Since this is visible, but not the canonical location for slab
data, the cache name is not used, the css_id should suffice.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: JoonSoo Kim <js1304@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extract the code to do object alignment from the allocators.
Do the alignment calculations in slab_common so that the
__kmem_cache_create functions of the allocators do not have
to deal with alignment.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Use a special function to create kmalloc caches and use that function in
SLAB and SLUB.
Acked-by: Joonsoo Kim <js1304@gmail.com>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Some flags are used internally by the allocators for management
purposes. One example of that is the CFLGS_OFF_SLAB flag that slab uses
to mark that the metadata for that cache is stored outside of the slab.
No cache should ever pass those as a creation flags. We can just ignore
this bit if it happens to be passed (such as when duplicating a cache in
the kmem memcg patches).
Because such flags can vary from allocator to allocator, we allow them
to make their own decisions on that, defining SLAB_AVAILABLE_FLAGS with
all flags that are valid at creation time. Allocators that doesn't have
any specific flag requirement should define that to mean all flags.
Common code will mask out all flags not belonging to that set.
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
With all the infrastructure in place, we can now have slabinfo_show
done from slab_common.c. A cache-specific function is called to grab
information about the cache itself, since that is still heavily
dependent on the implementation. But with the values produced by it, all
the printing and handling is done from common code.
Signed-off-by: Glauber Costa <glommer@parallels.com>
CC: Christoph Lameter <cl@linux.com>
CC: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
The header format is highly similar between slab and slub. The main
difference lays in the fact that slab may optionally have statistics
added here in case of CONFIG_SLAB_DEBUG, while the slub will stick them
somewhere else.
By making sure that information conditionally lives inside a
globally-visible CONFIG_DEBUG_SLAB switch, we can move the header
printing to a common location.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
CC: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
This patch moves all the common machinery to slabinfo processing
to slab_common.c. We can do better by noticing that the output is
heavily common, and having the allocators to just provide finished
information about this. But after this first step, this can be done
easier.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
CC: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Commit 1331e7a1bb ("rcu: Remove _rcu_barrier() dependency on
__stop_machine()") introduced slab_mutex -> cpu_hotplug.lock dependency
through kmem_cache_destroy() -> rcu_barrier() -> _rcu_barrier() ->
get_online_cpus().
Lockdep thinks that this might actually result in ABBA deadlock,
and reports it as below:
=== [ cut here ] ===
======================================================
[ INFO: possible circular locking dependency detected ]
3.6.0-rc5-00004-g0d8ee37 #143 Not tainted
-------------------------------------------------------
kworker/u:2/40 is trying to acquire lock:
(rcu_sched_state.barrier_mutex){+.+...}, at: [<ffffffff810f2126>] _rcu_barrier+0x26/0x1e0
but task is already holding lock:
(slab_mutex){+.+.+.}, at: [<ffffffff81176e15>] kmem_cache_destroy+0x45/0xe0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (slab_mutex){+.+.+.}:
[<ffffffff810ae1e2>] validate_chain+0x632/0x720
[<ffffffff810ae5d9>] __lock_acquire+0x309/0x530
[<ffffffff810ae921>] lock_acquire+0x121/0x190
[<ffffffff8155d4cc>] __mutex_lock_common+0x5c/0x450
[<ffffffff8155d9ee>] mutex_lock_nested+0x3e/0x50
[<ffffffff81558cb5>] cpuup_callback+0x2f/0xbe
[<ffffffff81564b83>] notifier_call_chain+0x93/0x140
[<ffffffff81076f89>] __raw_notifier_call_chain+0x9/0x10
[<ffffffff8155719d>] _cpu_up+0xba/0x14e
[<ffffffff815572ed>] cpu_up+0xbc/0x117
[<ffffffff81ae05e3>] smp_init+0x6b/0x9f
[<ffffffff81ac47d6>] kernel_init+0x147/0x1dc
[<ffffffff8156ab44>] kernel_thread_helper+0x4/0x10
-> #1 (cpu_hotplug.lock){+.+.+.}:
[<ffffffff810ae1e2>] validate_chain+0x632/0x720
[<ffffffff810ae5d9>] __lock_acquire+0x309/0x530
[<ffffffff810ae921>] lock_acquire+0x121/0x190
[<ffffffff8155d4cc>] __mutex_lock_common+0x5c/0x450
[<ffffffff8155d9ee>] mutex_lock_nested+0x3e/0x50
[<ffffffff81049197>] get_online_cpus+0x37/0x50
[<ffffffff810f21bb>] _rcu_barrier+0xbb/0x1e0
[<ffffffff810f22f0>] rcu_barrier_sched+0x10/0x20
[<ffffffff810f2309>] rcu_barrier+0x9/0x10
[<ffffffff8118c129>] deactivate_locked_super+0x49/0x90
[<ffffffff8118cc01>] deactivate_super+0x61/0x70
[<ffffffff811aaaa7>] mntput_no_expire+0x127/0x180
[<ffffffff811ab49e>] sys_umount+0x6e/0xd0
[<ffffffff81569979>] system_call_fastpath+0x16/0x1b
-> #0 (rcu_sched_state.barrier_mutex){+.+...}:
[<ffffffff810adb4e>] check_prev_add+0x3de/0x440
[<ffffffff810ae1e2>] validate_chain+0x632/0x720
[<ffffffff810ae5d9>] __lock_acquire+0x309/0x530
[<ffffffff810ae921>] lock_acquire+0x121/0x190
[<ffffffff8155d4cc>] __mutex_lock_common+0x5c/0x450
[<ffffffff8155d9ee>] mutex_lock_nested+0x3e/0x50
[<ffffffff810f2126>] _rcu_barrier+0x26/0x1e0
[<ffffffff810f22f0>] rcu_barrier_sched+0x10/0x20
[<ffffffff810f2309>] rcu_barrier+0x9/0x10
[<ffffffff81176ea1>] kmem_cache_destroy+0xd1/0xe0
[<ffffffffa04c3154>] nf_conntrack_cleanup_net+0xe4/0x110 [nf_conntrack]
[<ffffffffa04c31aa>] nf_conntrack_cleanup+0x2a/0x70 [nf_conntrack]
[<ffffffffa04c42ce>] nf_conntrack_net_exit+0x5e/0x80 [nf_conntrack]
[<ffffffff81454b79>] ops_exit_list+0x39/0x60
[<ffffffff814551ab>] cleanup_net+0xfb/0x1b0
[<ffffffff8106917b>] process_one_work+0x26b/0x4c0
[<ffffffff81069f3e>] worker_thread+0x12e/0x320
[<ffffffff8106f73e>] kthread+0x9e/0xb0
[<ffffffff8156ab44>] kernel_thread_helper+0x4/0x10
other info that might help us debug this:
Chain exists of:
rcu_sched_state.barrier_mutex --> cpu_hotplug.lock --> slab_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(slab_mutex);
lock(cpu_hotplug.lock);
lock(slab_mutex);
lock(rcu_sched_state.barrier_mutex);
*** DEADLOCK ***
=== [ cut here ] ===
This is actually a false positive. Lockdep has no way of knowing the fact
that the ABBA can actually never happen, because of special semantics of
cpu_hotplug.refcount and its handling in cpu_hotplug_begin(); the mutual
exclusion there is not achieved through mutex, but through
cpu_hotplug.refcount.
The "neither cpu_up() nor cpu_down() will proceed past cpu_hotplug_begin()
until everyone who called get_online_cpus() will call put_online_cpus()"
semantics is totally invisible to lockdep.
This patch therefore moves the unlock of slab_mutex so that rcu_barrier()
is being called with it unlocked. It has two advantages:
- it slightly reduces hold time of slab_mutex; as it's used to protect
the cachep list, it's not necessary to hold it over kmem_cache_free()
call any more
- it silences the lockdep false positive warning, as it avoids lockdep ever
learning about slab_mutex -> cpu_hotplug.lock dependency
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Get rid of the refcount stuff in the allocators and do that part of
kmem_cache management in the common code.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Do the initial settings of the fields in common code. This will allow us
to push more processing into common code later and improve readability.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Shift the allocations to common code. That way the allocation and
freeing of the kmem_cache structures is handled by common code.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Simplify locking by moving the slab_add_sysfs after all locks have been
dropped. Eases the upcoming move to provide sysfs support for all
allocators.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
The slab aliasing logic causes some strange contortions in slub. So add
a call to deal with aliases to slab_common.c but disable it for other
slab allocators by providng stubs that fail to create aliases.
Full general support for aliases will require additional cleanup passes
and more standardization of fields in kmem_cache.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Duping of the slabname has to be done by each slab. Moving this code to
slab_common avoids duplicate implementations.
With this patch we have common string handling for all slab allocators.
Strings passed to kmem_cache_create() are copied internally. Subsystems
can create temporary strings to create slab caches.
Slabs allocated in early states of bootstrap will never be freed (and
those can never be freed since they are essential to slab allocator
operations). During bootstrap we therefore do not have to worry about
duping names.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
What is done there can be done in __kmem_cache_shutdown.
This affects RCU handling somewhat. On rcu free all slab allocators do
not refer to other management structures than the kmem_cache structure.
Therefore these other structures can be freed before the rcu deferred
free to the page allocator occurs.
Reviewed-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
The freeing action is basically the same in all slab allocators.
Move to the common kmem_cache_destroy() function.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Make all allocators use the "kmem_cache" slabname for the "kmem_cache"
structure.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
kmem_cache_destroy does basically the same in all allocators.
Extract common code which is easy since we already have common mutex
handling.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Move the code to append the new kmem_cache to the list of slab caches to
the kmem_cache_create code in the shared code.
This is possible now since the acquisition of the mutex was moved into
kmem_cache_create().
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Instead of using s == NULL use an errorcode. This allows much more
detailed diagnostics as to what went wrong. As we add more functionality
from the slab allocators to the common kmem_cache_create() function we will
also add more error conditions.
Print the error code during the panic as well as in a warning if the module
can handle failure. The API for kmem_cache_create() currently does not allow
the returning of an error code. Return NULL but log the cause of the problem
in the syslog.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
kmem_cache_create() does cache integrity checks when CONFIG_DEBUG_VM is
defined. These checks interspersed with the regular code path has lead
to compile time warnings when compiled without CONFIG_DEBUG_VM defined.
Restructuring the code to move the integrity checks in to a new function
would eliminate the current compile warning problem and also will allow
for future changes to the debug only code to evolve without introducing
new warnings in the regular path.
This restructuring work is based on the discussion in the following
thread:
https://lkml.org/lkml/2012/7/13/424
[akpm@linux-foundation.org: fix build, cleanup]
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Eliminate an ifdef and a label by moving all the CONFIG_DEBUG_VM checking
inside the locked region.
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
The label oops is used in CONFIG_DEBUG_VM ifdef block and is defined
outside ifdef CONFIG_DEBUG_VM block. This results in the following
build warning when built with CONFIG_DEBUG_VM disabled. Fix to move
label oops definition to inside a CONFIG_DEBUG_VM block.
mm/slab_common.c: In function ‘kmem_cache_create’:
mm/slab_common.c:101:1: warning: label ‘oops’ defined but not used
[-Wunused-label]
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Move the mutex handling into the common kmem_cache_create()
function.
Then we can also move more checks out of SLAB's kmem_cache_create()
into the common code.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Use the mutex definition from SLAB and make it the common way to take a sleeping lock.
This has the effect of using a mutex instead of a rw semaphore for SLUB.
SLOB gains the use of a mutex for kmem_cache_create serialization.
Not needed now but SLOB may acquire some more features later (like slabinfo
/ sysfs support) through the expansion of the common code that will
need this.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
All allocators have some sort of support for the bootstrap status.
Setup a common definition for the boot states and make all slab
allocators use that definition.
Reviewed-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Kmem_cache_create() does a variety of sanity checks but those
vary depending on the allocator. Use the strictest tests and put them into
a slab_common file. Make the tests conditional on CONFIG_DEBUG_VM.
This patch has the effect of adding sanity checks for SLUB and SLOB
under CONFIG_DEBUG_VM and removes the checks in SLAB for !CONFIG_DEBUG_VM.
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Christoph Lameter