mirror of https://gitee.com/openkylin/linux.git
22071 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
5a764898af |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
|
|
|
Linus Torvalds
|
0f318cba1e |
linux-kselftest-fixes-5.8-rc5
This Kselftest fixes update for Linux 5.8-rc5 consists of tmp2 test changes to run on python3 and kselftest framework fix to incorrect return type. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl8ImAcACgkQCwJExA0N QxwEPg//fYS/ilgwYRn+Zc9fV/JPGYBfJKN1DdAua0fRgXjcz2z3dMON7Tt/HBNY KZDCDJMY4SSPBAdHRt/2duQx21C0i8zVcCBsPgZPhJdPF5tUIbD4oM0qCxrto1hB Wss1UHWmobB+BPI7mJSPFirYXyVqVXcpdYJmKkRYbpJTFRS2t1g5jFczZVgEbeEv 7lEY4yRi2hlGsCR4J+VqIUzyY+enc0vSYNaSaH8d4P1cC8h5Dl7MoqSIJshrNcDe kHz5l5R7cQSOQhsSIwvRuEolkmjyB0ejzuUsAQ6fwRKGMTVWlY+2fWcu5dNelYMm C3BGyVcAPXsrMfX6Vw4AFRd1a/7XiuNOFwH4PkQeomfAh2Ml9m1pO3fdqWQlbnHu VpkIbPaiTyarEaIYvF6UnxUTB+hNzHxw8Ac6TvwP3xz26k7U4X4ue75s03DVA7qx 63EsxY+gtAhD0ATUSpHq65ZgUSnQh5OAk0UB24h7kzxaE5EZ8gU8ifYqBPGiEot2 3KQ1QLZdCTmuTxsjI+OdXdOAnFuhqNtzk69CCS43YwDJitBLG6kz+aFgVWDZxkx1 MY5msDi/ROyymiWEUCSZhE70qIhIU/tDKQ9+QeL4VqEhzfcGrgePtV+dsp6seKCl Swi2PY2zoCdq6gZshiiIQln/M5XaW8dPBvz+wKaRo/sMzwts18M= =pKoZ -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "TPM2 test changes to run on python3 and kselftest framework fix to incorrect return type" * tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: ksft_test_num return type should be unsigned selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3 |
|
|
Jakub Bogusz
|
b2f9f1535b |
libbpf: Fix libbpf hashmap on (I)LP32 architectures
On ILP32, 64-bit result was shifted by value calculated for 32-bit long type
and returned value was much outside hashmap capacity.
As advised by Andrii Nakryiko, this patch uses different hashing variant for
architectures with size_t shorter than long long.
Fixes:
|
|
|
Lorenz Bauer
|
f43cb0d672 |
selftests: bpf: Fix detach from sockmap tests
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes:
|
|
|
Linus Torvalds
|
ce69fb3b39 |
Refactor kallsyms_show_value() users for correct cred
Several users of kallsyms_show_value() were performing checks not during "open". Refactor everything needed to gain proper checks against file->f_cred for modules, kprobes, and bpf. -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl8GUbMWHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJohnD/9VsPsAMV+8lhsPvkcuW/DkTcAY qUEzsXU3v06gJ0Z/1lBKtisJ6XmD93wWcZCTFvJ0S8vR3yLZvOVfToVjCMO32Trc 4ZkWTPwpvfeLug6T6CcI2ukQdZ/opI1cSabqGl79arSBgE/tsghwrHuJ8Exkz4uq 0b7i8nZa+RiTezwx4EVeGcg6Dv1tG5UTG2VQvD/+QGGKneBlrlaKlI885N/6jsHa KxvB7+8ES1pnfGYZenx+RxMdljNrtyptbQEU8gyvoV5YR7635gjZsVsPwWANJo+4 EGcFFpwWOAcVQaC3dareLTM8nVngU6Wl3Rd7JjZtjvtZba8DdCn669R34zDGXbiP +1n1dYYMSMBeqVUbAQfQyLD0pqMIHdwQj2TN8thSGccr2o3gNk6AXgYq0aYm8IBf xDCvAansJw9WqmxErIIsD4BFkMqF7MjH3eYZxwCPWSrKGDvKxQSPV5FarnpDC9U7 dYCWVxNPmtn+unC/53yXjEcBepKaYgNR7j5G7uOfkHvU43Bd5demzLiVJ10D8abJ ezyErxxEqX2Gr7JR2fWv7iBbULJViqcAnYjdl0y0NgK/hftt98iuge6cZmt1z6ai 24vI3X4VhvvVN5/f64cFDAdYtMRUtOo2dmxdXMid1NI07Mj2qFU1MUwb8RHHlxbK 8UegV2zcrBghnVuMkw== =ib5Q -----END PGP SIGNATURE----- Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kallsyms fix from Kees Cook: "Refactor kallsyms_show_value() users for correct cred. I'm not delighted by the timing of getting these changes to you, but it does fix a handful of kernel address exposures, and no one has screamed yet at the patches. Several users of kallsyms_show_value() were performing checks not during "open". Refactor everything needed to gain proper checks against file->f_cred for modules, kprobes, and bpf" * tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests: kmod: Add module address visibility test bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok() kprobes: Do not expose probe addresses to non-CAP_SYSLOG module: Do not expose section addresses to non-CAP_SYSLOG module: Refactor section attr into bin attribute kallsyms: Refactor kallsyms_show_value() to take cred |
|
|
Kees Cook
|
2c79583927 |
selftests: kmod: Add module address visibility test
Make sure we don't regress the CAP_SYSLOG behavior of the module address visibility via /proc/modules nor /sys/module/*/sections/*. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> |
|
|
Linus Torvalds
|
6ec4476ac8 |
Raise gcc version requirement to 4.9
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9
is a much better minimum version to target.
We have a number of workarounds for actual bugs in pre-4.9 gcc versions
(including things like internal compiler errors on ARM), but we also
have some syntactic workarounds for lacking features.
In particular, raising the minimum to 4.9 means that we can now just
assume _Generic() exists, which is likely the much better replacement
for a lot of very convoluted built-time magic with conditionals on
sizeof and/or __builtin_choose_expr() with same_type() etc.
Using _Generic also means that you will need to have a very recent
version of 'sparse', but thats easy to build yourself, and much less of
a hassle than some old gcc version can be.
The latest (in a long string) of reasons for minimum compiler version
upgrades was commit
|
|
|
Linus Torvalds
|
dcde237b9b |
Second batch of perf tooling fixes for v5.8:
- Intel PT fixes for PEBS-via-PT with registers.
- Fixes for Intel PT python based GUI.
- Avoid duplicated sideband events with Intel PT in system wide tracing.
- Remove needless 'dummy' event from TUI menu, used when synthesizing
meta data events for pre-existing processes.
- Fix corner case segfault when pressing enter in a screen without
entries in the TUI for report/top.
- Fixes for time stamp handling in libtraceevent.
- Explicitly set utf-8 encoding in perf flamegraph.
- Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy',
silencing perf build warning.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
Some of the most recent, experimental distros are failing, fixes will be
provided, but those gcc/clang versions are not yet in general use and some
are related to linking with libllvm, not the default build.
Mon 06 Jul 2020 10:07:28 AM -03
# export PERF_TARBALL=http://192.168.124.1/perf/perf-5.8.0-rc3.tar.xz
# dm
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 alpine:3.11 : Ok gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 alpine:edge : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
11 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
13 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
14 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 centos:5 : Ok gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-55)
19 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
20 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
21 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
22 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.1.1 20200618 releases/gcc-10.1.0-218-g6e81b0cf4f, clang version 10.0.0
23 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
24 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
25 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
26 debian:experimental : FAIL gcc (Debian 9.3.0-13) 9.3.0, clang version 9.0.1-12
# grep "make ARCH" dm.log/debian\:experimental
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= LIBCLANGLLVM=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
<SNIP>
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_ignoringImpCasts0Matcher::matches(clang::Expr const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x43): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasLoopVariable0Matcher::matches(clang::CXXForRangeStmt const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x48): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasRangeInit0Matcher::matches(clang::CXXForRangeStmt const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal28matcher_hasRangeInit0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal28matcher_hasRangeInit0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x48): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasArgumentOfType0Matcher::matches(clang::UnaryExprOrTypeTraitExpr const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal33matcher_hasArgumentOfType0Matcher7matchesERKNS_24UnaryExprOrTypeTraitExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal33matcher_hasArgumentOfType0Matcher7matchesERKNS_24UnaryExprOrTypeTraitExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x36): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
<SNIP>
#
27 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
28 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
29 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
30 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
31 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
32 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
33 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
34 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
35 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
36 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
37 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
38 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
39 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
40 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
41 fedora:30 : Ok gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
42 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
43 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
44 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
45 fedora:32 : Ok gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-1.fc32)
46 fedora:rawhide : FAIL gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-4.fc33)
CC /tmp/build/perf/util/mem2node.o
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
1595 | PyMODINIT_FUNC (*initfunc)(void);
| ^~~~~~~~~~~~~~
LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o
47 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.2.0-r2 p3) 9.2.0
48 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
49 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
50 mageia:7 : Ok gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
51:latestError: error creating container storage: the container name "cool_zhukovsky" is already in use by "bebca2836e01c65d0c08a2c93fd96fb4b22b1d5b7e5945c8c21cd313823cd5a3". You have to remove that container to be able to reuse that name.: that name is already in use
22aro:latest : Ok , clang version 9.0.0 (tags/RELEASE_900/final)
52 openmandriva:cooker : Ok gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
53 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
54 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
55 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
56 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
57 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.1.1 20200625 [revision c91e43e9363bd119a695d64505f96539fa451bf2], clang version 10.0.0
58 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
59 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.3)
60 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
61 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
62 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
63 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
64 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
69 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
70 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
71 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
72 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
73 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
75 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
76 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
79 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
80 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
81 ubuntu:18.10 : Ok gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
82 ubuntu:19.04 : Ok gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
83 ubuntu:19.04-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
84 ubuntu:19.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
85 ubuntu:19.04-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
86 ubuntu:19.10 : FAIL gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 9.0.0-2 (tags/RELEASE_900/final)
[root@quaco ~]# grep "make ARCH" dm.log/ubuntu\:19.10
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBELF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= NO_LIBBPF=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= LIBCLANGLLVM=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
<SNIP>
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::BindableMatcher<clang::Stmt> clang::ast_matchers::internal::VariadicFunction<clang::ast_matchers::internal::BindableMatcher<clang::Stmt>, clang::ast_matchers::internal::Matcher<clang::Expr>, &(clang::ast_matchers::internal::BindableMatcher<clang::Stmt> clang::ast_matchers::internal::makeDynCastAllOfComposite<clang::Stmt, clang::Expr>(llvm::ArrayRef<clang::ast_matchers::internal::Matcher<clang::Expr> const*>))>::operator()<clang::ast_matchers::internal::VariadicOperatorMatcher<clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::TypeLoc>, clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::Stmt> > >(clang::ast_matchers::internal::Matcher<clang::Expr> const&, clang::ast_matchers::internal::VariadicOperatorMatcher<clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::TypeLoc>, clang::ast_matchers::internal::ArgumentAdaptingMatcherFunc<clang::ast_matchers::internal::HasAncestorMatcher, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc>, clang::ast_matchers::internal::TypeList<clang::Decl, clang::NestedNameSpecifierLoc, clang::Stmt, clang::TypeLoc> >::Adaptor<clang::Stmt> > const&) const':
(.text._ZNK5clang12ast_matchers8internal16VariadicFunctionINS1_15BindableMatcherINS_4StmtEEENS1_7MatcherINS_4ExprEEEXadL_ZNS1_25makeDynCastAllOfCompositeIS4_S7_EENS3_IT_EEN4llvm8ArrayRefIPKNS6_IT0_EEEEEEEclIJNS1_23VariadicOperatorMatcherIJNS1_27ArgumentAdaptingMatcherFuncINS1_18HasAncestorMatcherENS1_8TypeListIJNS_4DeclENS_22NestedNameSpecifierLocES4_NS_7TypeLocEEEESS_E7AdaptorISR_EENSU_IS4_EEEEEEEES5_RKS8_DpRKT_[_ZNK5clang12ast_matchers8internal16VariadicFunctionINS1_15BindableMatcherINS_4StmtEEENS1_7MatcherINS_4ExprEEEXadL_ZNS1_25makeDynCastAllOfCompositeIS4_S7_EENS3_IT_EEN4llvm8ArrayRefIPKNS6_IT0_EEEEEEEclIJNS1_23VariadicOperatorMatcherIJNS1_27ArgumentAdaptingMatcherFuncINS1_18HasAncestorMatcherENS1_8TypeListIJNS_4DeclENS_22NestedNameSpecifierLocES4_NS_7TypeLocEEEESS_E7AdaptorISR_EENSU_IS4_EEEEEEEES5_RKS8_DpRKT_]+0x4e): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::dynCastTo(clang::ast_type_traits::ASTNodeKind) const'
<SNIP>
87 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
#
# uname -a
Linux quaco 5.8.0-rc3+ #2 SMP Tue Jun 30 09:47:17 -03 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
|
|
|
Paolo Bonzini
|
3c01655ac8 |
kselftest: ksft_test_num return type should be unsigned
Fixes a compiler warning:
In file included from sync_test.c:37:
../kselftest.h: In function ‘ksft_print_cnts’:
../kselftest.h:78:16: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
if (ksft_plan != ksft_test_num())
^~
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
|
David Ahern
|
34fe5a1cf9 |
ipv6: fib6_select_path can not use out path for nexthop objects
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.
More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.
Update selftests for this problem.
Fixes:
|
|
|
Pengfei Xu
|
0b78c9e8c1 |
selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
Python 2 is no longer supported by the Python upstream project, so upgrade TPM2 tests to Python 3. Fixed minor merge conflicts Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Pengfei Xu <pengfei.xu@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Arnaldo Carvalho de Melo
|
bee9ca1c8a |
perf report TUI: Remove needless 'dummy' event from menu
Fixing the common case of: perf record perf report And getting just the cycles events. We now have a 'dummy' event to get perf metadata events that take place while we synthesize metadata records for pre-existing processes by traversing procfs, so we always have this extra 'dummy' evsel, but we don't have to offer it as there will be no samples on it, remove this distraction. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/20200706115452.GA2772@redhat.com/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
4c95ad261c |
perf intel-pt: Fix PEBS sample for XMM registers
The condition to add XMM registers was missing, the regs array needed to
be in the outer scope, and the size of the regs array was too small.
Fixes:
|
|
|
Adrian Hunter
|
add07ccd92 |
perf intel-pt: Fix displaying PEBS-via-PT with registers
After recording PEBS-via-PT, perf script will not accept 'iregs' field e.g.
# perf record -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data ]
# ./perf script --itrace=eop -F+iregs
Samples for 'dummy:u' event do not have IREGS attribute set. Cannot print 'iregs' field.
Fix by using allow_user_set, which is true when recording AUX area data.
Fixes:
|
|
|
Adrian Hunter
|
75bcb8776d |
perf intel-pt: Fix recording PEBS-via-PT with registers
When recording PEBS-via-PT, the kernel will not accept the intel_pt
event with register sampling e.g.
# perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
Error:
intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
Fix by suppressing register sampling on the intel_pt evsel.
Committer notes:
Adrian informed that this is only available from Tremont onwards, so on
older processors the error continues the same as before.
Fixes:
|
|
|
Wei Li
|
d61cbb859b |
perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()
The segmentation fault can be reproduced as following steps:
1) Executing perf report in tui.
2) Typing '/xxxxx' to filter the symbol to get nothing matched.
3) Pressing enter with no entry selected.
Then it will report a segmentation fault.
It is caused by the lack of check of browser->he_selection when
accessing it's member res_samples in perf_evsel__hists_browse().
These processes are meaningful for specified samples, so we can skip
these when nothing is selected.
Fixes:
|
|
|
Linus Torvalds
|
72674d4800 |
A series of fixes for x86:
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space
value.
- Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
whitelisted for split lock detection. Some CPUs which do not support
it crash even when the MSR is written to 0 which is the default value.
- Fix the XEN PV fallout of the entry code rework
- Fix the 32bit fallout of the entry code rework
- Add more selftests to ensure that these entry problems don't come back.
- Disable 16 bit segments on XEN PV. It's not supported because XEN PV
does not implement ESPFIX64
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8B9JoTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoV8LEAC6QJPDvqYUl4r0rNIRG+S6D99lQOse
1smxvgXX4UaRz5Tgz6kvYUcucqmmnTfvnO8cg82LASeFw1xfVPPAtl3GZjoClwhv
0NJkKYcMm5QUOSVjJmjkcbAld//FyRfxHuJ8HMEtrbvkys2qWBmLzMaUNhFDNhcc
73UMmyuyL4kef9v/iAeR5WXG5+b+j9lZDiC1lTWuEKs10d1EdTwt2O/wtSRRPpMn
kL1qGTJAL+iRyRe7weLOkC2KZ9+Gq2NtyJQutkthZtGe5+pLT3AT6AlWxeg1HU8q
pxaQP25oe8/8naIoOmwiuwAP2qmm5eHedzXoN0h7i2XmofYOJaWeF95K7oDro8Nj
2deCx1bk0wr/RUxbYlfUacs8S+wmMWe7+BPnHXZphkSq5Vx+oXIw6mJOqmNb7Yiv
7ld1QwSD5dyWCEk1af16XKsFvSIRiGh8FypfTiTxyk+z7HIWBNXlu8OWHn1A7Sra
iaolCZfXtTJzm4w5+VVT2FX3s7jJrmMM4iSLtM2ISo2k+1HMlTbgLE6/yGjQ3ZaY
U298W7Pm8CwBRgzyKBvZVfncm0U/B0FNo/8C0jsJKPIOdpoLhs+u7sjpyaNC+toz
GE0skoWZxMhga4xPF84ua/l1VGncVUN1d5/dmnXz8xdyxFlktUtkt2iPE4G0rt3S
Xgh2uLHOgST6Kw==
=lI9c
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A series of fixes for x86:
- Reset MXCSR in kernel_fpu_begin() to prevent using a stale user
space value.
- Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly
whitelisted for split lock detection. Some CPUs which do not
support it crash even when the MSR is written to 0 which is the
default value.
- Fix the XEN PV fallout of the entry code rework
- Fix the 32bit fallout of the entry code rework
- Add more selftests to ensure that these entry problems don't come
back.
- Disable 16 bit segments on XEN PV. It's not supported because XEN
PV does not implement ESPFIX64"
* tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
selftests/x86: Consolidate and fix get/set_eflags() helpers
selftests/x86/syscall_nt: Clear weird flags after each test
selftests/x86/syscall_nt: Add more flag combinations
x86/entry/64/compat: Fix Xen PV SYSENTER frame setup
x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C
x86/entry: Assert that syscalls are on the right stack
x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted
x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
|
|
|
Andy Lutomirski
|
3c73b81a91 |
x86/entry, selftests: Further improve user entry sanity checks
Chasing down a Xen bug caused me to realize that the new entry sanity checks are still fairly weak. Add some more checks. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/881de09e786ab93ce56ee4a2437ba2c308afe7a9.1593795633.git.luto@kernel.org |
|
|
Tom Zanussi
|
2160d6c8a1 |
tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling
Kernel commit
|
|
|
Steven Rostedt (Red Hat)
|
374855c5e4 |
tools lib traceevent: Add API to read time information from kbuffer
Add the functions kbuffer_subbuf_timestamp() and kbuffer_ptr_delta() to get the timing data stored in the ring buffer that is used to produced the time stamps of the records. This is useful for tools like trace-cmd to be able to display the content of the read data to understand why the records show the time stamps that they do. Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-2-tz.stoyanov@gmail.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185703.619656282@goodmis.org Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
f18d5cf86c |
perf scripts python: exported-sql-viewer.py: Fix time chart call tree
Using Python version 3.8.2 and PySide2 version 5.14.0, time chart call tree
would not expand the tree to the result. Fix by using setExpanded().
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Charts -> Time chart by CPU
Move mouse over middle of chart
Right-click and select Show Call Tree
Before: displays Call Tree but not expanded to selected time
After: displays Call Tree expanded to selected time
Fixes:
|
|
|
Adrian Hunter
|
031c8d5edb |
perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' result
Using ctrl-F ('Find') would not find 'unknown' because it matches id
zero. Fix by excluding id zero from selection.
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Call Tree
Press: Ctrl-F
Enter: unknown
Press: Enter
Before: displays 'unknown' not found
After: tree is expanded to line showing 'unknown'
Fixes:
|
|
|
Adrian Hunter
|
7ff520b0a7 |
perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' result
Using ctrl-F ('Find') would not find 'unknown' because it matches id zero.
Fix by excluding id zero from selection.
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Context-Sensitive Call Graph
Press: Ctrl-F
Enter: unknown
Press: Enter
Before: gets stuck
After: tree is expanded to line showing 'unknown'
Fixes:
|
|
|
Adrian Hunter
|
3a3cf7c570 |
perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result
Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find')
would not expand the tree to the result. Fix by using setExpanded().
Example:
$ perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls
2020-06-26 15:32:14.928997 Creating database ...
2020-06-26 15:32:14.933971 Writing records...
2020-06-26 15:32:15.535251 Adding indexes
2020-06-26 15:32:15.542993 Dropping unused tables
2020-06-26 15:32:15.549716 Done
$ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db
Select: Reports -> Context-Sensitive Call Graph or Reports -> Call Tree
Press: Ctrl-F
Enter: main
Press: Enter
Before: line showing 'main' does not display
After: tree is expanded to line showing 'main'
Fixes:
|
|
|
Adrian Hunter
|
442ad2254a |
perf record: Fix duplicated sideband events with Intel PT system wide tracing
Commit
|
|
|
Adrian Hunter
|
640432e6be |
perf scripts python: export-to-postgresql.py: Fix struct.pack() int argument
Python 3.8 is requiring that arguments being packed as integers are also
integers. Add int() accordingly.
Before:
$ perf record -e intel_pt//u uname
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls
2020-06-25 16:09:10.547256 Creating database...
2020-06-25 16:09:10.733185 Writing to intermediate files...
Traceback (most recent call last):
File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1106, in synth_data
cbr(id, raw_buf)
File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1058, in cbr
value = struct.pack("!hiqiiiiii", 4, 8, id, 4, cbr, 4, MHz, 4, percent)
struct.error: required argument is not an integer
Fatal Python error: problem in Python trace event handler
Python runtime state: initialized
Current thread 0x00007f35d3695780 (most recent call first):
<no Python frame>
Aborted (core dumped)
After:
$ dropdb perf_data_db
$ rm -rf perf_data_db-perf-data
$ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls
2020-06-25 16:09:40.990267 Creating database...
2020-06-25 16:09:41.207009 Writing to intermediate files...
2020-06-25 16:09:41.270915 Copying to database...
2020-06-25 16:09:41.382030 Removing intermediate files...
2020-06-25 16:09:41.384630 Adding primary keys
2020-06-25 16:09:41.541894 Adding foreign keys
2020-06-25 16:09:41.677044 Dropping unused tables
2020-06-25 16:09:41.703761 Done
Fixes:
|
|
|
Arnaldo Carvalho de Melo
|
eb25de2765 |
tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
To bring in the change made in this cset:
|
|
|
Arnaldo Carvalho de Melo
|
9434628fce |
Merge remote-tracking branch 'torvalds/master' into perf/urgent
To synchronize UAPI headers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Linus Torvalds
|
0dce88451f |
linux-kselftest-fixes-5.8-rc4
This kselftest fixes update for Linux 5.8-rc4 consists of tpm test fixes from arkko Sakkinen. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl79/1wACgkQCwJExA0N QxxDOg//Q5SUe3nLy3AVKats4Ma2cuIi1hb1vsrLpGbl3OU9Bbf9uV84DBrXzb0C 1Mshp9hxGWphbgkBL9Bc4/DJ3dX6WXbZXDfOblHn15w1SaD6HC/8WAU802KR9gZj KqfFUMTncDeejk6KET8UVbphG1rVax0AQK0TAB4SnHPLt3noZYRvdVfEiCyKIQ6o zBvXsweKKH7QehoACtm4myVnQnDhdhvoSvJt8nRox2EU38fCR+MSfYZmDHaakDpp 0JYEPVIvk+vn2qfcGDuFax4AzfNrRfe9NbaqEX9g7vVCrOITNGPQOsH/+3UHj/9r scTRE8ItN4oHYEVtnWbIIBVYZt6VKVYbWVvfVoS2XQpaEFs3qAw241rCpb7Cg0E6 3f6QEVnhkFCNI9VCA1Z30puWQ6HmuroeHLBAfr8CB2Z14WC4kadMzUbTnj0BgJAh 7GACDPVy6ZOsqS5WUZ2v7kMqxJAJYwPUH+xZaW3M7yb5O9BdXsPDSDXblSOGhJX6 C+n/lK3DtsIYoMLW5eeRFfb5V8YZRfBP6nvjnuopgYm0H7BNfflIpybljR9lpAMo 0LRbkdEjTS9TpX7OravT7qZY3VWyr68wZLTGBQUp6lhFJhS4qjjL9mjefLBy9XQb 37VsnYXOUfnwcFXXXjxFlhVKqAIr14bE+lI0mfbnY4npqKvwjFY= =RDv/ -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "tpm test fixes from Jarkko Sakkinen" * tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: tpm: Use /bin/sh instead of /bin/bash selftests: tpm: Use 'test -e' instead of 'test -f' Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test" |
|
|
Linus Torvalds
|
55844741a1 |
linux-kselftest-kunit-fixes-5.8-rc4
This kunit fixes update for Linux 5.8-rc4 consists of fixes to build and run-times failures. Also includes troubleshooting tips updates to kunit user documentation. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl7985cACgkQCwJExA0N QxxFvhAA6Wa+1UMR4VKLZgfc2dL85LeV9tZO714ssIt1rxcgv2dHswsE0nbJmHyM DsfEufqOsvpX7/ic/JqrwIl+iDGrKlV9wo+ZLl+tdt5jVeB6OP6Dr5C3jvD3eZhX zUHxr04QGzQuJnS6gAOIrCa/qBz17duAEij6xj4if/6OAkL2Igb3PGFzhpjVKqJL TLY5UJ80D+QHJ7o8FWsaB8bNDMu7gmOBgfMb1qGB60cFppE+regoQRtkZefLap26 MixOFgRD5DyNoGqTZzJqSn7IZxvERoHfxKchzpAUHsNn9tI0r15X016Wcgf2+B+T 2eyRJDkTP3dt4oFuML4CXeQvZOgrcZNIWeVFmBK9NcmRg0WDnWPzCE2Mm+lnZD8e 0fefiaLBZw5+ztaz24S/M3mTpZQru8N2FDgLJmpLcPulIuDYpm4tB2PkBc0AmF35 6gC3WDa6cw1qbbDgN83xd9VdlACBe2fYzenhZCqDzgE1zGquORkhuAQYZfdGrixi ojpn7IKN+JeufiFZuu1xOJeAojIZ4JU42FxM0S1PSXf9deqICzfa1LSOWEaL+V4G GaPq/nnMhtY2rMGFAQXyCP4YQe2XQU/Jt1SOdFA/UZ1W+oYXwjOlSVo9xpjJV/6y 4TAQ7Yg8S87CUbffYpBLw3Xkg8E0L9ih+E+UOineMcUiu6yxA2Q= =XeG4 -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan "Fixes for build and run-times failures. Also includes troubleshooting tips updates to kunit user documentation" * tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: kunit: Add some troubleshooting tips to the FAQ kunit: kunit_tool: Fix invalid result when build fails kunit: show error if kunit results are not present kunit: kunit_config: Fix parsing of CONFIG options with space |
|
|
Andy Lutomirski
|
cced0b24bb |
selftests/x86: Consolidate and fix get/set_eflags() helpers
There are several copies of get_eflags() and set_eflags() and they all are buggy. Consolidate them and fix them. The fixes are: Add memory clobbers. These are probably unnecessary but they make sure that the compiler doesn't move something past one of these calls when it shouldn't. Respect the redzone on x86_64. There has no failure been observed related to this, but it's definitely a bug. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/982ce58ae8dea2f1e57093ee894760e35267e751.1593191971.git.luto@kernel.org |
|
|
Andy Lutomirski
|
a61fa2799e |
selftests/x86/syscall_nt: Clear weird flags after each test
Clear the weird flags before logging to improve strace output -- logging results while, say, TF is set does no one any favors. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/907bfa5a42d4475b8245e18b67a04b13ca51ffdb.1593191971.git.luto@kernel.org |
|
|
Andy Lutomirski
|
e4ef7de160 |
selftests/x86/syscall_nt: Add more flag combinations
Add EFLAGS.AC to the mix. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/12924e2fe2c5826568b7fc9436d85ca7f5eb1743.1593191971.git.luto@kernel.org |
|
|
David S. Miller
|
e708e2bd55 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2020-06-30
The following pull-request contains BPF updates for your *net* tree.
We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).
The main changes are:
1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
types, from Yonghong Song.
2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.
3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
internals and integrate it properly into DMA core, from Christoph Hellwig.
4) Fix RCU splat from recent changes to avoid skipping ingress policy when
kTLS is enabled, from John Fastabend.
5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
position masking to work, from Andrii Nakryiko.
6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
of network programs, from Maciej Żenczykowski.
7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.
8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
Yonghong Song
|
d923021c2c |
bpf: Add tests for PTR_TO_BTF_ID vs. null comparison
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison,
one for PTR_TO_BTF_ID in the ctx structure and the
other for PTR_TO_BTF_ID after one level pointer chasing.
In both cases, the test ensures condition is not
removed.
For example, for this test
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
Before the previous verifier change, we have xlated codes:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
1: (b4) w0 = 0
2: (95) exit
After the previous verifier change, we have:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; if (arg == 0)
1: (55) if r1 != 0x0 goto pc+4
; test7_result = 1;
2: (18) r1 = map[id:6][0]+48
4: (b7) r2 = 1
5: (7b) *(u64 *)(r1 +0) = r2
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
6: (b4) w0 = 0
7: (95) exit
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630171241.2523875-1-yhs@fb.com
|
|
|
Lorenz Bauer
|
1a1ad3c20a |
selftests: bpf: Pass program to bpf_prog_detach in flow_dissector
Calling bpf_prog_detach is incorrect, since it takes target_fd as
its argument. The intention here is to pass it as attach_bpf_fd,
so use bpf_prog_detach2 and pass zero for target_fd.
Fixes:
|
|
|
Lorenz Bauer
|
0434296c72 |
selftests: bpf: Pass program and target_fd in flow_dissector_reattach
Pass 0 as target_fd when attaching and detaching flow dissector.
Additionally, pass the expected program when detaching.
Fixes:
|
|
|
Jakub Sitnicki
|
6ebb85c83a |
selftests/bpf: Test updating flow_dissector link with same program
This case, while not particularly useful, is worth covering because we expect the operation to succeed as opposed when re-attaching the same program directly with PROG_ATTACH. While at it, update the tests summary that fell out of sync when tests extended to cover links. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200625141357.910330-5-jakub@cloudflare.com |
|
|
Jarkko Sakkinen
|
377ff83083 |
selftests: tpm: Use /bin/sh instead of /bin/bash
It's better to use /bin/sh instead of /bin/bash in order to run the tests
in the BusyBox shell.
Fixes:
|
|
|
Jarkko Sakkinen
|
88a16840f4 |
selftests: tpm: Use 'test -e' instead of 'test -f'
'test -f' is suitable only for *regular* files. Use 'test -e' instead.
Cc: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Cc: linux-integrity@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Fixes:
|
|
|
Jarkko Sakkinen
|
5be206eaac |
Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
The reverted commit illegitly uses tpm2-tools. External dependencies are
absolutely forbidden from these tests. There is also the problem that
clearing is not necessarily wanted behavior if the test/target computer is
not used only solely for testing.
Fixes:
|
|
|
Linus Torvalds
|
7ecb59a566 |
Peter Zijlstra says:
Address KCOV vs noinstr. There is no function attribute to selectively
suppress KCOV instrumentation, instead teach objtool to NOP out the
calls in noinstr functions.
This cures a bunch of KCOV crashes (as used by syzcaller).
-----BEGIN PGP SIGNATURE-----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=0Wd6
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"Three fixes from Peter Zijlstra suppressing KCOV instrumentation in
noinstr sections.
Peter Zijlstra says:
"Address KCOV vs noinstr. There is no function attribute to
selectively suppress KCOV instrumentation, instead teach objtool
to NOP out the calls in noinstr functions"
This cures a bunch of KCOV crashes (as used by syzcaller)"
* tag 'objtool_urgent_for_5.8_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix noinstr vs KCOV
objtool: Provide elf_write_{insn,reloc}()
objtool: Clean up elf_write() condition
|
|
|
Linus Torvalds
|
a358505d8a |
Peter Zijlstra says:
These patches address a number of instrumentation issues that were found after
the x86/entry overhaul. When combined with rcu/urgent and objtool/urgent, these
patches make UBSAN/KASAN/KCSAN happy again.
Part of making this all work is bumping the minimum GCC version for KASAN
builds to gcc-8.3, the reason for this is that the __no_sanitize_address
function attribute is broken in GCC releases before that.
No known GCC version has a working __no_sanitize_undefined, however because the
only noinstr violation that results from this happens when an UB is found, we
treat it like WARN. That is, we allow it to violate the noinstr rules in order
to get the warning out.
-----BEGIN PGP SIGNATURE-----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=fcu1
-----END PGP SIGNATURE-----
Merge tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry fixes from Borislav Petkov:
"This is the x86/entry urgent pile which has accumulated since the
merge window.
It is not the smallest but considering the almost complete entry core
rewrite, the amount of fixes to follow is somewhat higher than usual,
which is to be expected.
Peter Zijlstra says:
'These patches address a number of instrumentation issues that were
found after the x86/entry overhaul. When combined with rcu/urgent
and objtool/urgent, these patches make UBSAN/KASAN/KCSAN happy
again.
Part of making this all work is bumping the minimum GCC version for
KASAN builds to gcc-8.3, the reason for this is that the
__no_sanitize_address function attribute is broken in GCC releases
before that.
No known GCC version has a working __no_sanitize_undefined, however
because the only noinstr violation that results from this happens
when an UB is found, we treat it like WARN. That is, we allow it to
violate the noinstr rules in order to get the warning out'"
* tag 'x86_entry_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix #UD vs WARN more
x86/entry: Increase entry_stack size to a full page
x86/entry: Fixup bad_iret vs noinstr
objtool: Don't consider vmlinux a C-file
kasan: Fix required compiler version
compiler_attributes.h: Support no_sanitize_undefined check with GCC 4
x86/entry, bug: Comment the instrumentation_begin() usage for WARN()
x86/entry, ubsan, objtool: Whitelist __ubsan_handle_*()
x86/entry, cpumask: Provide non-instrumented variant of cpu_is_offline()
compiler_types.h: Add __no_sanitize_{address,undefined} to noinstr
kasan: Bump required compiler version
x86, kcsan: Add __no_kcsan to noinstr
kcsan: Remove __no_kcsan_or_inline
x86, kcsan: Remove __no_kcsan_or_inline usage
|
|
|
John Fastabend
|
53792fa45b |
bpf, sockmap: Add ingres skb tests that utilize merge skbs
Add a test to check strparser merging skbs is working. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/159312681884.18340.4922800172600252370.stgit@john-XPS-13-9370 |
|
|
Linus Torvalds
|
21d2f6850c |
powerpc fixes for 5.8 #4
A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y. Two minor build fixes. Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl73L58THG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgFHvD/9InTRjjJ8VPoZri5d4UNP1xPcAMF6P u9KppOVJDHaRgI58xtWgfH3eXVg90OY/u6nVAfaXIlrhH5BCEnx/+gRRoQXBR8vE MkoGevVCo6/2FpzAQHAQpaz5BrqipMA0EGBrUvK4+doWJf+lCcuTu4pXCawlbjr+ Hbc4NChEuqLYkEnWidQL+MxAoJH9Z1HiXmilWRj+8rG0HnMMH6oqDurxUhGmA6/I 1LHarXkPeWoxx1UQLMN5kDsTLdxCLmz9oqG5EON2vQjob7Zu8sv4WvEZjx7qibHy yEe1YUO7xqv6OatGyWvF6FXq6H4udK1djlvFz4FBjOg6YPusrmSIDT5JLth3Q9Fi P8Z1DsiHAljgq3bfwIFdFQRG35JAzV1LmEI89z6VADGPPZuIwUCoagnfnQUBaPfg VTlnYJlUEmCDAH6R/OSUIOpVqmblCukeSIObvigcsyamPrAZZKl0PPw3ns+Uzykw WJ1ukCyppscPwZ00+hByUXOmX6ZBMHoFakgpd3b09RUHiMbrjvpgaUFEwqSl1AsA yJ83uqaywqjewKH0uMwqRtw7j/BfXa47hYYqNeBcxqu9h5ORMchAIB4rgbO2LDgr ZsvhiSlBqEL8j5HnzVYEaFPniE6NWesx1JJLOD41fWN+Fa9SFzkVfZy6rQyhOLU8 rjQQ+iJJVFreqw== =TvGN -----END PGP SIGNATURE----- Merge tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for a crash in nested KVM when CONFIG_DEBUG_VIRTUAL=y. - Two minor build fixes. Thanks to: Aneesh Kumar K.V, Arseny Solokha, Harish. * tag 'powerpc-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build failure in ebb tests powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUAL powerpc/fsl_booke/32: Fix build with CONFIG_RANDOMIZE_BASE |
|
|
Linus Torvalds
|
8530684fd3 |
arm64 fixes for -rc3
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl71tgEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNB5sB/48VLEeDtkRtHVQntLG9SFogwDkHjkRW/lo
kgO5APEcdhZZq3mBY2fIww5iX5Et7vRpx8ovempmqZGhO9B4ZMSNG0DFxoYdtXTU
jgox+LzkW+hYldK1Bv03ioLZgIz6Lc8zyK6kRB7NuDN88VEVds0ksYmcAojeIN9b
vmpquEAoVppm0VPjt6VA0xQ6HtiKfvlV7PW6Pqs0dKovnNY982jRXBMzaGBbDFQ7
3eKmW4PBru/Ew16J172vf/0sBJQBiZrSdXCqv/USKvPHkUDkJiYsaWLpsWx4m4to
bE/OS6aWx94NcgxPUca3y2G2OhPU+VFiXjuJ0kvzt4EJIuW/CGUf
=2kBR
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big fix here is to our vDSO sigreturn trampoline as, after a
painfully long stint of debugging, it turned out that fixing some of
our CFI directives in the merge window lit up a bunch of logic in
libgcc which has been shown to SEGV in some cases during asynchronous
pthread cancellation.
It looks like we can fix this by extending the directives to restore
most of the interrupted register state from the sigcontext, but it's
risky and hard to test so we opted to remove the CFI directives for
now and rely on the unwinder fallback path like we used to.
- Fix unwinding through vDSO sigreturn trampoline
- Fix build warnings by raising minimum LD version for PAC
- Whitelist some Kryo Cortex-A55 derivatives for Meltdown and SSB
- Fix perf register PC reporting for compat tasks
- Fix 'make clean' warning for arm64 signal selftests
- Fix ftrace when BTI is compiled in
- Avoid building the compat vDSO using GCC plugins"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add KRYO{3,4}XX silver CPU cores to SSB safelist
arm64: perf: Report the PC value in REGS_ABI_32 mode
kselftest: arm64: Remove redundant clean target
arm64: kpti: Add KRYO{3, 4}XX silver CPU cores to kpti safelist
arm64: Don't insert a BTI instruction at inner labels
arm64: vdso: Don't use gcc plugins for building vgettimeofday.c
arm64: vdso: Only pass --no-eh-frame-hdr when linker supports it
arm64: Depend on newer binutils when building PAC
arm64: compat: Remove 32-bit sigreturn code from the vDSO
arm64: compat: Always use sigpage for sigreturn trampoline
arm64: compat: Allow 32-bit vdso and sigpage to co-exist
arm64: vdso: Disable dwarf unwinding through the sigreturn trampoline
|
|
|
David Gow
|
ee61492ab9 |
kunit: kunit_tool: Fix invalid result when build fails
When separating out different phases of running tests[1] (build/exec/parse/etc), the format of the KunitResult tuple changed (adding an elapsed_time variable). This is not populated during a build failure, causing kunit.py to crash. This fixes [1] to probably populate the result variable, causing a failing build to be reported properly. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=45ba7a893ad89114e773b3dc32f6431354c465d6 Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Uriel Guajardo
|
e173b8b8c4 |
kunit: show error if kunit results are not present
Currently, if the kernel is configured incorrectly or if it crashes before any kunit tests are run, kunit finishes without error, reporting that 0 test cases were run. To fix this, an error is shown when the tap header is not found, which indicates that kunit was not able to run at all. Signed-off-by: Uriel Guajardo <urielguajardo@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Rikard Falkeborn
|
3f37d14b8a |
kunit: kunit_config: Fix parsing of CONFIG options with space
Commit |
|
|
Ingo Molnar
|
2c92d787cc |
Merge branch 'linus' into x86/entry, to resolve conflicts
Conflicts: arch/x86/kernel/traps.c Signed-off-by: Ingo Molnar <mingo@kernel.org> |