Commit Graph

60 Commits

Author SHA1 Message Date
Clemens Ladisch 7040b6d1fe ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data
The TEAC UD-H01 firmware sends wrong feedback frequency values, thus
causing the PC to send the samples at a wrong rate, which results in
clicks and crackles in the output.

Add a workaround to detect and fix the corruption.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
[mick37@gmx.de: use sender->udh01_fb_quirk rather than
 ep->udh01_fb_quirk in snd_usb_handle_sync_urb()]
Reported-and-tested-by: Mick <mick37@gmx.de>
Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-02 18:21:55 +02:00
Takashi Iwai 0ba41d917e ALSA: usb-audio: Use standard printk helpers
Convert with dev_err() and co from snd_printk(), etc.
As there are too deep indirections (e.g. ep->chip->dev->dev),
a few new local macros, usb_audio_err() & co, are introduced.

Also, the device numbers in some messages are dropped, as they are
shown in the prefix automatically.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26 16:45:34 +01:00
Thomas Pugliese a93455e1c3 ALSA: usb: use multiple packets per urb for Wireless USB inbound audio
For Wireless USB audio devices, use multiple isoc packets per URB for
inbound endpoints with a datainterval < 5.  This allows the WUSB host
controller to take advantage of bursting to service endpoints whose
logical polling interval is less than the 4ms minimum polling interval
limit in WUSB.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-11-27 11:55:13 +01:00
Eldad Zack 05c79b772f ALSA: usb-audio: remove unused endpoint flag EP_FLAG_ACTIVATED
EP_FLAG_ACTIVATED is never tested for, remove it.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 11:22:43 +02:00
Eldad Zack df23a2466a ALSA: usb-audio: rename alt_idx to altsetting
As Clemens Ladisch kindly explained:
 "Please note that there are two methods to identify alternate settings:
  the number, which is the value in bAlternateSetting, and the index,
  which is the index in the descriptor array.  There might be some wording
  in the USB spec that these two values must be the same, but in reality,
  [insert standard rant about firmware writers], bAlternateSetting
  must be treated as a random ID value."

This patch changes the name to express the correct usage semantics.
No functional change.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 11:22:03 +02:00
Eldad Zack 9b7c552bba ALSA: usb-audio: void return type of snd_usb_endpoint_deactivate()
The return value of snd_usb_endpoint_deactivate() is not used,
make the function have no return value.
Update the documentation to reflect what the function is actually
doing.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 11:00:03 +02:00
Eldad Zack 239b9f7990 ALSA: usb-audio: don't deactivate URBs on in-use EP
If an endpoint in use, its associated URBs should not be
deactivated.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 10:55:14 +02:00
Eldad Zack 9372103990 ALSA: usb-audio: remove unused parameter from sync_ep_set_params
Since the format is not actually used in sync_ep_set_params(),
there is no need to pass it down.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-07 10:52:06 +02:00
Alan Stern 976b6c064a ALSA: improve buffer size computations for USB PCM audio
This patch changes the way URBs are allocated and their sizes are
determined for PCM playback in the snd-usb-audio driver.  Currently
the driver allocates too few URBs for endpoints that don't use
implicit sync, making underruns more likely to occur.  This may be a
holdover from before I/O delays could be measured accurately; in any
case, it is no longer necessary.

The patch allocates as many URBs as possible, subject to four
limitations:

	The total number of URBs for the endpoint is not allowed to
	exceed MAX_URBS (which the patch increases from 8 to 12).

	The total number of packets per URB is not allowed to exceed
	MAX_PACKS (or MAX_PACKS_HS for high-speed devices), which is
	decreased from 20 to 6.

	The total duration of queued data is not allowed to exceed
	MAX_QUEUE, which is decreased from 24 ms to 18 ms.

	The total number of ALSA frames in the output queue is not
	allowed to exceed the ALSA buffer size.

The last requirement is the hardest to implement.  Currently the
number of URBs needed to fill a buffer cannot be determined in
advance, because a buffer contains a fixed number of frames whereas
the number of frames in an URB varies to match shifts in the device's
clock rate.  To solve this problem, the patch changes the logic for
deciding how many packets an URB should contain.  Rather than using as
many as possible without exceeding an ALSA period boundary, now the
driver uses only as many packets as needed to transfer a predetermined
number of frames.  As a result, unless the device's clock has an
exceedingly variable rate, the number of URBs making up each period
(and hence each buffer) will remain constant.

The overall effect of the patch is that playback works better in
low-latency settings.  The user can still specify values for
frames/period and periods/buffer that exceed the capabilities of the
hardware, of course.  But for values that are within those
capabilities, the performance will be improved.  For example, testing
shows that a high-speed device can handle 32 frames/period and 3
periods/buffer at 48 KHz, whereas the current driver starts to get
glitchy at 64 frames/period and 2 periods/buffer.

A side effect of these changes is that the "nrpacks" module parameter
is no longer used.  The patch removes it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Daniel Mack <zonque@gmail.com>
Tested-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-26 10:25:31 +02:00
Takashi Iwai 68538bf2bc ASoC: Updates for v3.12
- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
   regressions in the special cases for non-DAPM CODECs and make it
   easier to integrate with other components on boards.  All existing
   drivers have had some level of DAPM support added.
 - A lot of cleanups in DAPM plus support for maintaining controls in a
   specific state while a DAPM widget all contributed by Lars-Peter Clausen.
 - Core helpers for bitbanged AC'97 reset from Markus Pargmann.
 - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
   Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
   machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
   Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
   Microelectronics WM8997.
 - Support for building drivers that can support it cross-platform for
   compile test.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSF0rqAAoJELSic+t+oim9YK0P/0CwP7lAjL87EF+dUKW51raB
 7K8xtOgObec1+Fnc1FEbN6us1hXRkjZJMJyRqa3DO5EaNM5TUoxUa/+MNsKmyGXs
 UhoW7J2TUizxgStxszXdxLEZG5oErxwCtJR3xlIkAq4kcnUI0LwRtGctmguZH74a
 UFxd34tcq8LxytvBp1HaNgaG1OQqIqYUNHYXKCwZZMJRxk8TQU9NfAzlCOtWfPWp
 jjdsBkX6bypWzSV/0P8rdSvjhHlJ1vBw3XTD9jD1/EuC5J7qqKQvwo5Oid98QHiv
 /guV0zx6EPdW5IgyGVvlyc4e5zLrtrckj05Kjyy426mZUpLmGoQCPj+ZAZA+jdqo
 qX3M9lXdisx4FI1Ke+y00G64q9fOuNEyjHKnoMPbZXC7zBTLPC8znncM6Xk5MOx/
 Y+fSChecYzkCrBJqHZGUcMdl0/xL1cRrH6BP2I5ISn5ruEjmTuj3dD0JTUVRi1HM
 KGrLP6TnuY+yBMhoqbGsH7YtNN5NDbqnJrUXQy82GGHH++LlHs/0ljDdOCuwX774
 qu1PsyTwrBvCU9erJS4yTG1KIiFFLTn+exPvUOyjaTFVbs8PoX2NOC4/Ihqj+dvU
 UDj/Lh+/zF2BzrkxN65BwuXULElxjtoFvleWLzt7V8qOCb5LOzBVW8a7f5HQzfU6
 LsEXDtB4VkjGjOGAAsII
 =qzif
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.12

- DAPM is now mandatory for CODEC drivers in order to avoid the repeated
  regressions in the special cases for non-DAPM CODECs and make it
  easier to integrate with other components on boards.  All existing
  drivers have had some level of DAPM support added.
- A lot of cleanups in DAPM plus support for maintaining controls in a
  specific state while a DAPM widget all contributed by Lars-Peter Clausen.
- Core helpers for bitbanged AC'97 reset from Markus Pargmann.
- New drivers and support for Analog Devices ADAU1702 and ADAU1401(a),
  Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based
  machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung
  Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson
  Microelectronics WM8997.
- Support for building drivers that can support it cross-platform for
  compile test.
2013-08-23 14:12:22 +02:00
Clemens Ladisch 57e6dae108 ALSA: usb-audio: do not trust too-big wMaxPacketSize values
The driver used to assume that the streaming endpoint's wMaxPacketSize
value would be an indication of how much data the endpoint expects or
sends, and compute the number of packets per URB using this value.

However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes,
while only about 88 or 44 bytes are be actually used.  This discrepancy
would result in URBs with far too few packets, which would not work
correctly on the EHCI driver.

To get correct URBs, use wMaxPacketSize only as an upper limit on the
packet size.

Reported-by: James Stone <jamesmstone@gmail.com>
Tested-by: James Stone <jamesmstone@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.35+
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-08 11:37:34 +02:00
Eldad Zack e7e58df8ef ALSA: usb-audio: WARN_ON when alts is passed as NULL
Prevent NULL dereference in snd_usb_add_endpoints(), when
alts is passed as NULL. In this case, WARN (since this is
a non-fatal bug) and return NULL ep. Call sites treat a NULL
return value as an error.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-08-06 10:52:27 +02:00
Clemens Ladisch c75c5ab575 ALSA: USB: adjust for changed 3.8 USB API
The recent changes in the USB API ("implement new semantics for
URB_ISO_ASAP") made the former meaning of the URB_ISO_ASAP flag the
default, and changed this flag to mean that URBs can be delayed.
This is not the behaviour wanted by any of the audio drivers because
it leads to discontinuous playback with very small period sizes.
Therefore, our URBs need to be submitted without this flag.

Reported-by: Joe Rayhawk <jrayhawk@fairlystable.org>
Cc: <stable@vger.kernel.org> # 3.8 only
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29 10:57:35 +02:00
Daniel Mack d24f5061ee ALSA: snd-usb: add support for DSD DOP stream transport
In order to provide a compatibility way for pushing DSD
samples through ordinary PCM channels, the "DoP open Standard" was
invented. See http://www.dsd-guide.com for the official document.

The host is required to stuff DSD marker bytes (0x05, 0xfa,
alternating) in the MSB of 24 bit wide samples on the bus, in addition
to the 16 bits of actual DSD sample payload.

To support this, the hardware and software stride logic in the driver
has to be tweaked a bit, as we make the userspace believe we're
operating on 16 bit samples, while we in fact push one more byte per
channel down to the hardware.

The DOP runtime information is stored in struct snd_usb_substream, so
we can keep track of our state across multiple calls to
prepare_playback_urb_dsd_dop().

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-18 10:03:32 +02:00
Eldad Zack 98ae472b57 ALSA: usb-audio: spelling correction
Correct spelling of snd_usb_endpoint_implict_feedback_sink in all
occurances.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:30 +02:00
Eldad Zack 88766f04c4 ALSA: usb-audio: convert list_for_each to entry variant
Change occurances of list_for_each into list_for_each_entry where
applicable.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:06 +02:00
Eldad Zack 28acb12014 ALSA: usb-audio: use sender stride for implicit feedback
For implicit feedback endpoints, the number of bytes for each packet
is matched by the corresponding synchronizing endpoint.
The size is calculated by taking the actual size and dividing it by
the stride - currently by the endpoint's stride, but we should use the
synchronization source's stride.
This is evident when the number of channels differ between the
synchronization source and the implicitly fed-back endpoint, as with
M-Audio Fast Track C400 - the synchronization source (capture)
has 4 channels, while the implicit feedback mode endpoint has 6.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-29 08:42:54 +01:00
Takashi Iwai b2eb950de2 ALSA: usb-audio: stop both data and sync endpoints asynchronously
As we are stopping the endpoints asynchronously now, it's better to
trigger the stop of both data and sync endpoints and wait for pending
stopping operations, instead of the sequential trigger-and-wait
procedure.

So the wait argument in snd_usb_endpoint_stop() is dropped, and it's
expected that the caller synchronizes explicitly by calling
snd_usb_endpoint_sync_pending_stop().  (Actually there is only one
place calling this, so it was safe to change.)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-21 11:43:56 +01:00
Takashi Iwai ccc1696d52 ALSA: usb-audio: simplify endpoint deactivation code
For further code simplification, drop the conditional call for
usb_kill_urb() with can_wait argument in deactivate_urbs(), and use
only usb_unlink_urb() and wait_clear_urbs() pairs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-21 11:43:54 +01:00
Takashi Iwai a9bb36261e ALSA: usb-audio: simplify snd_usb_endpoint_start/stop arguments
Reduce the redundant arguments for snd_usb_endpoint_start() and
snd_usb_endpoint_stop().  Also replaced from int to bool.

No functional changes by this commit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-21 11:43:40 +01:00
Takashi Iwai 20d32022a8 ALSA: usb-audio: Deprecate async_unlink option
The async unlink behavior has been working over years.  The option was
provided only as a workaround for 2.4.x kernel.  Let's get rid of it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-21 11:37:40 +01:00
Joe Perches 190006f9d6 ALSA: usb-audio: use bitmap_weight
Use bitmap_weight to count the total number of bits set in bitmap.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-17 11:35:07 +01:00
Takashi Iwai f58161ba1b ALSA: usb-audio: Fix crash at re-preparing the PCM stream
There are bug reports of a crash with USB-audio devices when PCM
prepare is performed immediately after the stream is stopped via
trigger callback.  It turned out that the problem is that we don't
wait until all URBs are killed.

This patch adds a new function to synchronize the pending stop
operation on an endpoint, and calls in the prepare callback for
avoiding the crash above.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=49181

Reported-and-tested-by: Artem S. Tashkinov <t.artem@lycos.com>
Cc: <stable@vger.kernel.org> [v3.6]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-08 08:56:44 +01:00
Linus Torvalds f5a246eab9 Sound updates for 3.7-rc1
This contains pretty many small commits covering fairly large range of
 files in sound/ directory.  Partly because of additional API support
 and partly because of constantly developed ASoC and ARM stuff.
 
 Some highlights:
 
 - Introduced the helper function and documentation for exposing the
   channel map via control API, as discussed in Plumbers; most of PCI
   drivers are covered, will follow more drivers later
 
 - Most of drivers have been replaced with the new PM callbacks (if
   the bus is supported)
 
 - HD-audio controller got the support of runtime PM and the support of
   D3 clock-stop.  Also changing the power_save option in sysfs kicks
   off immediately to enable / disable the power-save mode.
 
 - Another significant code change in HD-audio is the rewrite of
   firmware loading code.  Other than that, most of changes in HD-audio
   are continued cleanups and standardization for the generic auto
   parser and bug fixes (HBR, device-specific fixups), in addition to
   the support of channel-map API.
 
 - Addition of ASoC bindings for the compressed API, used by the
   mid-x86 drivers.
 
 - Lots of cleanups and API refreshes for ASoC codec drivers and
   DaVinci.
 
 - Conversion of OMAP to dmaengine.
 
 - New machine driver for Wolfson Microelectronics Bells.
 
 - New CODEC driver for Wolfson Microelectronics WM0010.
 
 - Enhancements to the ux500 and wm2000 drivers
 
 - A new driver for DA9055 and the support for regulator bypass mode.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQcpeWAAoJEGwxgFQ9KSmkpi4P/2etDDz5aEkEHNa1l4xEmFcm
 ymiGTgjaalqpUAVbM/gYx9G59EFMEbzUl1BHAqE5La4wO/v9lNPb+VrdUo+B+NZ7
 WSxIPWcNqdinSuoSqyYPjoPMVnhs3EMtNOqmf4jm1JOvdqA+4rO29xQVAqK/5Gfu
 LpMOyPiRi5ODnbQ1BOIWwpKICioY/mLwGJudK3z0i/fYVA7gLub20f+w+sOjKIA4
 wmwQAMTjAR798Cg/tVy4fQmf4SLw+c2nIgGe/PD+2gVlGXLNKBrJfMonHPTbmwKu
 lmJO/EtnijNOnpbn6up7ryUQ9cSoZAUZOfdIOgmAeQgQ/LWR0f+zf2IQehSPwrul
 g6hqOnQI2DNN7ugT3cYVbYnsh56TjyhnxhhxZgkapqh706QkqHGyKJNMRetzuXmP
 1O//MnZJrFQWd6sOKLlTL2ZzRvnxEJcNVGaE6bbwZTfQMtPeo9l1842uIq1dLUtG
 VxZb/svKUkMXv4is1dwUYUkpDsKxsgMEmabmuovceGf2N7jj/irkXgqxf6LWkaY1
 JQ7ZFWUJyDzEMXRaFfzdGO15T532CfB84wvFX5xoPMwMste2AA7QuybFBVstXhKu
 AtKNDgRJFUTlnLIxydpPBWdWH3UJdEaFwwsSfuNKI8OmmGKhWC/aP83k4hzueu9H
 KYLvY/0ObMSMqiwh/ndQ
 =uNqD
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This contains pretty many small commits covering fairly large range of
  files in sound/ directory.  Partly because of additional API support
  and partly because of constantly developed ASoC and ARM stuff.

  Some highlights:

   - Introduced the helper function and documentation for exposing the
     channel map via control API, as discussed in Plumbers; most of PCI
     drivers are covered, will follow more drivers later

   - Most of drivers have been replaced with the new PM callbacks (if
     the bus is supported)

   - HD-audio controller got the support of runtime PM and the support
     of D3 clock-stop.  Also changing the power_save option in sysfs
     kicks off immediately to enable / disable the power-save mode.

   - Another significant code change in HD-audio is the rewrite of
     firmware loading code.  Other than that, most of changes in
     HD-audio are continued cleanups and standardization for the generic
     auto parser and bug fixes (HBR, device-specific fixups), in
     addition to the support of channel-map API.

   - Addition of ASoC bindings for the compressed API, used by the
     mid-x86 drivers.

   - Lots of cleanups and API refreshes for ASoC codec drivers and
     DaVinci.

   - Conversion of OMAP to dmaengine.

   - New machine driver for Wolfson Microelectronics Bells.

   - New CODEC driver for Wolfson Microelectronics WM0010.

   - Enhancements to the ux500 and wm2000 drivers

   - A new driver for DA9055 and the support for regulator bypass mode."

Fix up various arm soc header file reorg conflicts.

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits)
  ALSA: hda - Add new codec ALC283 ALC290 support
  ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls
  ALSA: hda - fix indices on boost volume on Conexant
  ALSA: aloop - add locking to timer access
  ALSA: hda - Fix hang caused by race during suspend.
  sound: Remove unnecessary semicolon
  ALSA: hda/realtek - Fix detection of ALC271X codec
  ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310
  ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event
  ALSA: hda - make a generic unsol event handler
  ASoC: codecs: Add DA9055 codec driver
  ASoC: eukrea-tlv320: Convert it to platform driver
  ALSA: ASoC: add DT bindings for CS4271
  ASoC: wm_hubs: Ensure volume updates are handled during class W startup
  ASoC: wm5110: Adding missing volume update bits
  ASoC: wm5110: Add OUT3R support
  ASoC: wm5110: Add AEC loopback support
  ASoC: wm5110: Rename EPOUT to HPOUT3
  ASoC: arizona: Add more clock rates
  ASoC: arizona: Add more DSP options for mixer input muxes
  ...
2012-10-09 07:07:14 +09:00
Daniel Mack 8dce30c891 ALSA: snd-usb: fix next_packet_size calls for pause case
Also fix the calls to next_packet_size() for the pause case. This was
missed in 245baf983 ("ALSA: snd-usb: fix calls to next_packet_size").

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de>
Cc: stable@kernel.org
[ Taking directly because Takashi is on vacation  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-27 16:46:15 -07:00
Dylan Reid 35ec7aa298 ALSA: usb-audio: Don't require hw_params in endpoint.
Change the interface to configure an endpoint so that it doesn't require
a hw_params struct.  This will allow it to be called from prepare
instead of hw_params, configuring it after system resume.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-19 08:07:52 +02:00
Takashi Iwai 0528842690 Merge branch 'for-linus' into for-next
To merge HD-audio fixes back to 3.7 development line
2012-09-11 16:46:36 +02:00
Daniel Mack 2b58fd5b31 ALSA: snd-usb: Add quirks for Playback Designs devices
Playback Designs' USB devices have some hardware limitations on their
USB interface. In particular:

 - They need a 20ms delay after each class compliant request as the
   hardware ACKs the USB packets before the device is actually ready
   for the next command. Sending data immediately will result in buffer
   overflows in the hardware.
 - The devices send bogus feedback data at the start of each stream
   which confuse the feedback format auto-detection.

This patch introduces a new quirks hook that is called after each
control packet and which adds a delay for all devices that match
Playback Designs' USB VID for now.

In addition, it adds a counter to snd_usb_endpoint to drop received
packets on the floor. Another new quirks function that is called once
an endpoint is started initializes that counter for these devices on
their sync endpoint.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Andreas Koch <andreas@akdesigninc.com>
Supported-by: Demian Martin <demianm_1@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-04 11:31:14 +02:00
Daniel Mack 245baf983c ALSA: snd-usb: fix calls to next_packet_size
In order to support devices with implicit feedback streaming models,
packet sizes are now stored with each individual urb, and the PCM
handling code which fills the buffers purely relies on the size fields
now.

However, calling snd_usb_audio_next_packet_size() for all possible
packets in an URB at once, prior to letting the PCM code do its job
does in fact not lead to the same behaviour than what the old code did:
The PCM code will break its loop once a period boundary is reached,
consequently using up less packets that it really could.

As snd_usb_audio_next_packet_size() implements a feedback mechanism to
the endpoints phase accumulator, the number of calls to that function
matters, and when called too often, the data rate runs out of bounds.

Fix this by making the next_packet function public, and call it from the
PCM code as before if the packet data sizes are not defined.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: stable@kernel.org [v3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31 21:03:48 +02:00
Daniel Mack 015618b902 ALSA: snd-usb: Fix URB cancellation at stream start
Commit e9ba389c5 ("ALSA: usb-audio: Fix scheduling-while-atomic bug in
PCM capture stream") fixed a scheduling-while-atomic bug that happened
when snd_usb_endpoint_start was called from the trigger callback, which
is an atmic context. However, the patch breaks the idea of the endpoints
reference counting, which is the reason why the driver has been
refactored lately.

Revert that commit and let snd_usb_endpoint_start() take care of the URB
cancellation again. As this function is called from both atomic and
non-atomic context, add a flag to denote whether the function may sleep.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: stable@kernel.org [3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-30 07:46:27 +02:00
Takashi Iwai e9ba389c5f ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream
A PCM capture stream on usb-audio causes a scheduling-while-atomic
BUG, as reported in the bugzilla entry below.  It's because
snd_usb_endpoint_start() is called at first at trigger START for a
capture stream, and this function contains the left-over EP
deactivation codes.  The problem doesn't happen for a playback stream
because the function is called at PCM prepare time, which can sleep.

This patch fixes the BUG by moving the EP deactivation code into the
PCM prepare callback.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46011
Cc: <stable@vger.kernel.org> [v3.5+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-16 08:04:07 +02:00
Daniel Mack 68e67f40b7 ALSA: snd-usb: move calls to usb_set_interface
The rework of the snd-usb endpoint logic moved the calls to
snd_usb_set_interface() into the snd_usb_endpoint implemenation. This
changed the order in which these calls are issued to the device, and
thereby caused regressions for some webcams.

Fix this by moving the calls back to pcm.c for now to make it work again
and use snd_usb_endpoint_activate() to really tear down all remaining
URBs in the flight, consequently fixing another regression caused by USB
packets on the wire after altsetting 0 has been selected.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Philipp Dreimann <philipp@dreimann.net>
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-13 09:31:42 +02:00
Daniel Mack 07a5e9d4fd ALSA: snd-usb: fix some typos in endpoint.c documentation
Also be more specific about some details while at it.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 20:16:18 +02:00
Andrew Morton 68853fa30c ALSA: usb-audio: sound/usb/endpoint.c: suppress warning
sound/usb/endpoint.c: In function 'queue_pending_output_urbs':
sound/usb/endpoint.c:298: warning: 'packet' may be used uninitialized in this function

Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 08:10:10 +02:00
Takashi Iwai 85f71932e5 ALSA: usb: Fix fill_max flag set
ep->fill_max is a 1 bit flag, thus it has to be boolean.
  sound/usb/endpoint.c: In function 'snd_usb_endpoint_set_params':
  sound/usb/endpoint.c:785: warning: overflow in implicit constant conversion

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 12:41:54 +02:00
Takashi Iwai c5ee4ec828 ALSA: usb: Remove unused variable
sound/usb/endpoint.c: In function ‘deactivate_urbs’:
sound/usb/endpoint.c:520:16: warning: unused variable ‘flags’ [-Wunused-variable]

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:27:28 +02:00
Daniel Mack 94c27215bc ALSA: snd-usb: add some documentation
Document the new streaming code and some of the functions so that
contributers can catch up easier.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:25:24 +02:00
Daniel Mack d399ff9593 ALSA: snd-usb: remove old streaming logic
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:24:23 +02:00
Daniel Mack edcd3633e7 ALSA: snd-usb: switch over to new endpoint streaming logic
With the previous commit that added the new streaming model, all
endpoint and streaming related code is now in endpoint.c, and pcm.c
only acts as a wrapper for handling the packet's payload.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:24:08 +02:00
Daniel Mack 8fdff6a319 ALSA: snd-usb: implement new endpoint streaming model
This patch adds a new generic streaming logic for audio over USB.

It defines a model (snd_usb_endpoint) that handles everything that
is related to an USB endpoint and its streaming. There are functions to
activate and deactivate an endpoint (which call usb_set_interface()),
and to start and stop its URBs. It also has function pointers to be
called when data was received or is about to be sent, and pointer to
a sync slave (another snd_usb_endpoint) that is informed when data has
been received.

A snd_usb_endpoint knows about its state and implements a refcounting,
so only the first user will actually start the URBs and only the last
one to stop it will tear them down again.

With this sort of abstraction, the actual streaming is decoupled from
the pcm handling, which makes the "implicit feedback" mechanisms easy to
implement.

In order to split changes properly, this patch only adds the new
implementation but leaves the old one around, so the the driver doesn't
change its behaviour. The switch to actually use the new code is
submitted separately.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 10:23:42 +02:00
Takashi Iwai 80c8a2a372 ALSA: usb-audio - Avoid flood of frame-active debug messages
With some buggy devices, the usb-audio driver may give "frame xxx active"
kernel messages too often.  Better to keep it as debug-only using
snd_printdd(), and also add the rate-limit for avoiding floods.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=738681

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-01-09 11:40:46 +01:00
Daniel Mack c731bc96ad ALSA: snd-usb: move code from urb.c to endpoint.c
No code altered at this point, simply preparing for upcoming
refactorizations.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 17:07:03 +02:00
Daniel Mack e8e8babf56 ALSA: snd-usb: re-order code
Move code from endpoint.c into a new file called stream.c and rename
functions so that their names actually reflect what they're doing.

This way, endpoint.c will be available to functions that hold all the
endpoint logic.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 17:07:02 +02:00
Clemens Ladisch 824818b148 ALSA: snd-usb: Accept UAC2 FORMAT_TYPE descriptors with bLength > 6
The Focusrite Scarlett 18i6 USB has them that way, which is probably a
bug. Anyway, the driver should simply ignore this fact.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Nicolai Krakowiak <nicolai.krakowiak@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-04 16:23:47 +02:00
Guillaume Pellerin 0f5733b0c8 ALSA: usb-audio - Add quirks for M-Audio Fast Track Pro and Quattro
This patch gives M-Audio Fast Track Pro and M-Audio Quattro quirks and
endpoints to boot and setup those devices with special options (digital
inputs and outputs, 24 bits mode, etc...). M-Audio Audiophile quirks are
just adapted to match the new global M-Audio parameters.

Special configurations can be then loaded through a modprobe conf file.
For example, to set the 24 bits mode on the Fast Track Pro add
/etc/modprobe.d/fast_track_pro.conf :

    options snd_usb_audio   vid=0x763 pid=0x2012 device_setup=0x08

Here is a list of the possibilities in this example :
http://files.parisson.com/debian/fast-track-pro.conf

Signed-off-by: Guillaume Pellerin <yomguy@parisson.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-12 18:15:45 +02:00
Takashi Iwai 68885a3ff3 Merge branch 'fix/misc' into topic/misc 2010-09-03 22:38:52 +02:00
Clemens Ladisch a2acad8298 ALSA: usb-audio: fix detection of vendor-specific device protocol settings
The Audio Class v2 support code in 2.6.35 added checks for the
bInterfaceProtocol field.  However, there are devices (usually those
detected by vendor-specific quirks) that do not have one of the
predefined values in this field, which made the driver reject them.

To fix this regression, restore the old behaviour, i.e., assume that
a device with an unknown bInterfaceProtocol field (other than
UAC_VERSION_2) has more or less UAC-v1-compatible descriptors.

[compile warning fixes by tiwai]

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-03 22:36:39 +02:00
Clemens Ladisch 65f04443c9 ALSA: usb-audio: fix Fast Track Ultra (8R) 44.1 sample rates
The M-Audio Fast Track Ultra series devices did not play sound correctly
at 44.1/88.2 kHz. Changing the output endpoint attribute to adaptive
fixes this.

Signed-off-by: Felix Homann <fexpop@web.de>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-02 11:52:03 +02:00
Daniel Mack 3d8d4dcfd4 ALSA: usb-audio: simplify control interface access
As the control interface is now carried in struct snd_usb_audio, we can
simplify the API a little and also drop the private ctrlif field from
struct usb_mixer_interface.

Also remove a left-over function prototype in pcm.h.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:10:23 +02:00
Daniel Mack 69da9bcb98 ALSA: usb-audio: unify UAC macros and struct names
Get rid of the last occurances of _v1 suffixes, and move the version
number right after the "uac" string. Now things are consitent again.

Sorry for the forth and back, but it just looks much nicer this way.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23 16:09:26 +02:00