Commit Graph

1698 Commits

Author SHA1 Message Date
Masahiro Yamada 30527cefb3 kbuild: remove 'prepare1' target
Now that there is no rule for 'prepare1', it can go away.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-18 02:19:31 +09:00
Masahiro Yamada b7dca6dd1e kbuild: create *.mod with full directory path and remove MODVERDIR
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.

To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.

Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.

$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.

Stephen Rothwell reported a race condition caused by a module name
conflict:

  https://lkml.org/lkml/2019/5/13/991

In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.

Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.

However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.

To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.

$(MODVERDIR) is no longer needed.

Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.

I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
2019-07-18 02:19:31 +09:00
Masahiro Yamada ff9b45c55b kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod
Towards the goal of removing MODVERDIR, read out modules.order to get
the list of modules to be processed. This is simpler than parsing *.mod
files in $(MODVERDIR).

For external modules, $(KBUILD_EXTMOD)/modules.order should be read.

I removed the single target %.ko from the top Makefile. To make sure
modpost works correctly, vmlinux and the other modules must be built.
You cannot build a particular .ko file alone.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-18 02:16:27 +09:00
Masahiro Yamada 1bd9a46801 kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin}
Removing the 'kernel/' prefix will make our life easier because we can
simply do 'cat modules.order' to get all built modules with full paths.

Currently, we parse the first line of '*.mod' files in $(MODVERDIR).
Since we have duplicated functionality here, I plan to remove MODVERDIR
entirely.

In fact, modules.order is generated also for external modules in a
broken format. It adds the 'kernel/' prefix to the absolute path of
the module, like this:

  kernel//path/to/your/external/module/foo.ko

This is fine for now since modules.order is not used for external
modules. However, I want to sanitize the format everywhere towards
the goal of removing MODVERDIR.

We cannot change the format of installed module.{order,builtin}.
So, 'make modules_install' will add the 'kernel/' prefix while copying
them to $(MODLIB)/.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17 22:39:27 +09:00
Masahiro Yamada 7e13191879 kbuild: do not create empty modules.order in the prepare stage
Currently, $(objtree)/modules.order is touched in two places.

In the 'prepare0' rule, scripts/Makefile.build creates an empty
modules.order while processing 'obj=.'

In the 'modules' rule, the top-level Makefile overwrites it with
the correct list of modules.

While this might be a good side-effect that modules.order is made
empty every time (probably this is not intended functionality),
I personally do not like this behavior.

Create modules.order only when it is sensible to do so.

This avoids creating the following pointless files:

  scripts/basic/modules.order
  scripts/dtc/modules.order
  scripts/gcc-plugins/modules.order
  scripts/genksyms/modules.order
  scripts/mod/modules.order
  scripts/modules.order
  scripts/selinux/genheaders/modules.order
  scripts/selinux/mdp/modules.order
  scripts/selinux/modules.order

Going forward, $(objtree)/modules.order lists the modules that
was built in the last successful build.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17 22:39:27 +09:00
Masahiro Yamada 46457133ac kbuild: remove tag files by distclean instead of mrproper
It takes somewhat long time to generate these tag files.
Keep such precious files until we run 'make distclean'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-17 22:37:51 +09:00
Masahiro Yamada 89ff7131f7 kbuild: add --hash-style= and --build-id unconditionally
As commit 1e0221374e ("mips: vdso: drop unnecessary cc-ldoption")
explained, these flags are supported by the minimal required version
of binutils. They are supported by ld.lld too.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2019-07-17 22:37:51 +09:00
Linus Torvalds 39ceda5ce1 Kbuild updates for v5.3
- remove headers_{install,check}_all targets
 
 - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES
 
 - re-implement 'make headers_install' more cleanly
 
 - add new header-test-y syntax to compile-test headers
 
 - compile-test exported headers to ensure they are compilable in
   user-space
 
 - compile-test headers under include/ to ensure they are self-contained
 
 - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags
 
 - add -Werror=unknown-warning-option for Clang
 
 - add 128-bit built-in types support to genksyms
 
 - fix missed rebuild of modules.builtin
 
 - propagate 'No space left on device' error in fixdep to Make
 
 - allow Clang to use its integrated assembler
 
 - improve some coccinelle scripts
 
 - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
   path for $(srctree).
 
 - do not ignore errors when compression utility is missing
 
 - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl0oxNkeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGnhcP/AuM8s+3SYFiLitJ
 ISbznLFP2Xatq0SPXp5+moez/AMTK6Mm1biPcdo20d+TjVEh4+9F2nq12Ii9U8/D
 tds9A6G8+Bb28r9GMIVQPdFohijW6ijtDziS31iQnIWyPsP/yx6PKfLAD9F4ca1x
 7/4btmu+BOMjtN0NrMWSNz5MM47xUzoWIALL40SV4PzGVXLCQZ2PBNPeSRIk22Jt
 ynDNPuNsmDWcFfwAE+sLSDrhCHZlwM8rg8rf6jmYdc4LcN4cj0oho5+K1TRyC9mn
 fO3PT25juFejthxQulxEfyGggnyLM6BNTgPDGcCHSP4nD7mlXA9GcpZICtJOgGGu
 SlDadMZ0GRMK5zcZ0MF0GQboeyViwsbXgrRcYuXt6cUFWX4P/1SeAQ5Mf4u1EKqf
 hEbwFXV/g81ht0lFS8gyWkvdpoNPtxGHNPusLjp65C4rc0/48/s+7EE/u8JTPl1g
 dQTeIOds6XUOkJgqhEfuq+8gfngbjKc9bYhs+ACbkCzBltQdnb6m5aLgk0ODxe8I
 WbGn0+cQcS9VVwre7E5DnFSVWVOHAG5taiUwj0KDcHB0Jxw9Gvorq9WU1ppHHYH2
 XQIFBx7XHdn28d+plS8R23vAPgDgrGdvE5RYK5tNQLhTJ6BbjlZ1n/Tmxzu62scK
 deG3aCOB13Om7OTzTUh9+C3TC9ZQ
 =E2Rz
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - remove headers_{install,check}_all targets

 - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES

 - re-implement 'make headers_install' more cleanly

 - add new header-test-y syntax to compile-test headers

 - compile-test exported headers to ensure they are compilable in
   user-space

 - compile-test headers under include/ to ensure they are self-contained

 - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value
   flags

 - add -Werror=unknown-warning-option for Clang

 - add 128-bit built-in types support to genksyms

 - fix missed rebuild of modules.builtin

 - propagate 'No space left on device' error in fixdep to Make

 - allow Clang to use its integrated assembler

 - improve some coccinelle scripts

 - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
   path for $(srctree).

 - do not ignore errors when compression utility is missing

 - misc cleanups

* tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits)
  kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix
  kbuild: Inform user to pass ARCH= for make mrproper
  kbuild: fix compression errors getting ignored
  kbuild: add a flag to force absolute path for srctree
  kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree
  kbuild: remove src and obj from the top Makefile
  scripts/tags.sh: remove unused environment variables from comments
  scripts/tags.sh: drop SUBARCH support for ARM
  kbuild: compile-test kernel headers to ensure they are self-contained
  kheaders: include only headers into kheaders_data.tar.xz
  kheaders: remove meaningless -R option of 'ls'
  kbuild: support header-test-pattern-y
  kbuild: do not create wrappers for header-test-y
  kbuild: compile-test exported headers to ensure they are self-contained
  init/Kconfig: add CONFIG_CC_CAN_LINK
  kallsyms: exclude kasan local symbols on s390
  kbuild: add more hints about SUBDIRS replacement
  coccinelle: api/stream_open: treat all wait_.*() calls as blocking
  coccinelle: put_device: Add a cast to an expression for an assignment
  coccinelle: put_device: Adjust a message construction
  ...
2019-07-12 16:03:16 -07:00
Geert Uytterhoeven 3a475b2166 kbuild: Inform user to pass ARCH= for make mrproper
When cross-compiling an out-of-tree build with an unclean source tree
directory, the build fails with:

  /path/to/kernel/source/tree is not clean, please run 'make mrproper'
  in the '/path/to/kernel/source/tree' directory.

However, doing so does not fix the problem, as "make mrproper" now
requires passing the target architecture to the make command, else it
won't remove $(srctree)/arch/$(SRCARCH)/include/generated.
"git ls-files -o" doesn't give a clue, as it doesn't list (empty)
directories, only files.

Improve usability by including the ARCH= option in the error output.

Fixes: a788b2ed81 ("kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-11 00:05:09 +09:00
Masahiro Yamada 95fd3f87bf kbuild: add a flag to force absolute path for srctree
In old days, Kbuild always used an absolute path for $(srctree).

Since commit 890676c65d ("kbuild: Use relative path when building in
the source tree"), $(srctree) is '.' when O= was not passed from the
command line.

Yet, using absolute paths is useful in some cases even without O=, for
instance, to create a cscope file with absolute path tags.

'O=.' was known to work as a workaround to force Kbuild to use absolute
paths even when you are building in the source tree.

Since commit 25b146c5b8 ("kbuild: allow Kbuild to start from any
directory"), Kbuild is too clever to be tricked. Even if you pass 'O=.'
Kbuild notices you are building in the source tree, then use '.' for
$(srctree).

So, 'make O=. cscope' is no help to create absolute path tags.

We cannot force one or the other according to commit e93bc1a0ca
("Revert "kbuild: specify absolute paths for cscope""). Both of
relative path and absolute path have pros and cons.

This commit adds a new flag KBUILD_ABS_SRCTREE to allow users to
choose the absolute path for $(srctree).

'make KBUILD_ABS_SRCTREE=1 cscope' will work as a replacement of
'make O=. cscope'.

Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-11 00:05:09 +09:00
Masahiro Yamada 051f278e9d kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.

It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.

I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-11 00:05:09 +09:00
Masahiro Yamada 75dd47472b kbuild: remove src and obj from the top Makefile
Replace $(src) and $(obj) with $(srctree) and $(objtree), respectively.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-11 00:05:09 +09:00
Masahiro Yamada 43c78d8803 kbuild: compile-test kernel headers to ensure they are self-contained
The headers in include/ are globally used in the kernel source tree
to provide common APIs. They are included from external modules, too.

It will be useful to make as many headers self-contained as possible
so that we do not have to rely on a specific include order.

There are more than 4000 headers in include/. In my rough analysis,
70% of them are already self-contained. With efforts, most of them
can be self-contained.

For now, we must exclude more than 1000 headers just because they
cannot be compiled as standalone units. I added them to header-test-.
The blacklist was mostly generated by a script, so the reason of the
breakage should be checked later.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2019-07-09 21:44:37 +09:00
Masahiro Yamada c93a0368aa kbuild: do not create wrappers for header-test-y
header-test-y does not work with headers in sub-directories.

For example, you may want to write a Makefile, like this:

include/linux/Kbuild:

  header-test-y += mtd/nand.h

This entry will create a wrapper include/linux/mtd/nand.hdrtest.c
with the following content:

  #include "mtd/nand.h"

To make this work, we need to add $(srctree)/include/linux to the
header search path. It would be tedious to add ccflags-y.

Instead, we could change the *.hdrtest.c rule to wrap:

  #include "nand.h"

This works for in-tree build since #include "..." searches in the
relative path from the header with this directive. For O=... build,
we need to add $(srctree)/include/linux/mtd to the header search path,
which will be even more tedious.

After all, I thought it would be handier to compile headers directly
without creating wrappers.

I added a new build rule to compile %.h into %.h.s

The target is %.h.s instead of %.h.o because it is slightly faster.
Also, as for GCC, an empty assembly is smaller than an empty object.

I wrote the build rule:

  $(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<

instead of:

  $(CC) $(c_flags) -S -o $@ -x c $<

Both work fine with GCC, but the latter is bad for Clang.

This comes down to the difference in the -Wunused-function policy.
GCC does not warn about unused 'static inline' functions at all.
Clang does not warn about the ones in included headers, but does
about the ones in the source. So, we should handle headers as
headers, not as source files.

In fact, this has been hidden since commit abb2ea7dfd ("compiler,
clang: suppress warning for unused static inline functions"), but we
should not rely on that.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
2019-07-09 10:10:27 +09:00
Masahiro Yamada d6fc9fcbaa kbuild: compile-test exported headers to ensure they are self-contained
Multiple people have suggested compile-testing UAPI headers to ensure
they can be really included from user-space. "make headers_check" is
obviously not enough to catch bugs, and we often leak unresolved
references to user-space.

Use the new header-test-y syntax to implement it. Please note exported
headers are compile-tested with a completely different set of compiler
flags. The header search path is set to $(objtree)/usr/include since
exported headers should not include unexported ones.

We use -std=gnu89 for the kernel space since the kernel code highly
depends on GNU extensions. On the other hand, UAPI headers should be
written in more standardized C, so they are compiled with -std=c90.
This will emit errors if C++ style comments, the keyword 'inline', etc.
are used. Please use C style comments (/* ... */), '__inline__', etc.
in UAPI headers.

There is additional compiler requirement to enable this test because
many of UAPI headers include <stdlib.h>, <sys/ioctl.h>, <sys/time.h>,
etc. directly or indirectly. You cannot use kernel.org pre-built
toolchains [1] since they lack <stdlib.h>.

I reused CONFIG_CC_CAN_LINK to check the system header availability.
The intention is slightly different, but a compiler that can link
userspace programs provide system headers.

For now, a lot of headers need to be excluded because they cannot
be compiled standalone, but this is a good start point.

[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/index.html

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2019-07-08 23:13:57 +09:00
Linus Torvalds 0ecfebd2b5 Linux 5.2 2019-07-07 15:41:56 -07:00
Masahiro Yamada 4e8fc3f55a kbuild: add more hints about SUBDIRS replacement
Commit 0126be38d9 ("kbuild: announce removal of SUBDIRS if used")
added a hint about the 'SUBDIRS' replacement, but it was not clear
enough.

Multiple people sent me similar questions, patches. For instance,

  https://lkml.org/lkml/2019/1/17/456

I did not mean to use M= for building a subdirectory in the kernel tree.

From commit 669efc76b3 ("net: hns3: fix compile error"), people
already (ab)use M=... to do that because it seems to work to some extent.

Documentation/kbuild/kbuild.txt says M= and KBUILD_EXTMOD are used for
building external modules.

In fact, Kbuild supports the single target '%/' for this purpose, but
this may not be noticed much.

Kindly add more hints.

Makefile:213: ================= WARNING ================
Makefile:214: 'SUBDIRS' will be removed after Linux 5.3
Makefile:215:
Makefile:216: If you are building an individual subdirectory
Makefile:217: in the kernel tree, you can do like this:
Makefile:218: $ make path/to/dir/you/want/to/build/
Makefile:219: (Do not forget the trailing slash)
Makefile:220:
Makefile:221: If you are building an external module,
Makefile:222: Please use 'M=' or 'KBUILD_EXTMOD' instead
Makefile:223: ==========================================

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-07-08 02:25:59 +09:00
Nathan Chancellor 876a060089 kbuild: Add ability to test Clang's integrated assembler
There are some people interested in experimenting with Clang's
integrated assembler. To make it easy to do so without source
modification, allow the user to specify 'AS=clang' as part of the
make command to avoid adding '-no-integrated-as' to the {A,C}FLAGS.

Link: https://github.com/ClangBuiltLinux/linux/issues/577
Suggested-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-04 08:28:29 +09:00
Masahiro Yamada 68980b4704 kbuild: split modules.order build rule out of 'modules' target
modules.order is a real target. Split its build rule out like
modules.builtin

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-01 10:09:28 +09:00
Masahiro Yamada 50ef0cdf58 kbuild: fix missed rebuild of modules.builtin
Unlike modules.order, modules.builtin is not rebuilt every time.
Once modules.builtin is created, it will not be updated until
auto.conf or tristate.conf is changed.

So, it does not  notice a change in Makefile, for example, the rename
of modules.

Kbuild must always descend into directories for modules.builtin too.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-01 10:04:46 +09:00
Linus Torvalds 6fbc7275c7 Linux 5.2-rc7 2019-06-30 11:25:36 +08:00
Nathan Chancellor 589834b3a0 kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS
In commit ebcc5928c5 ("arm64: Silence gcc warnings about arch ABI
drift"), the arm64 Makefile added -Wno-psabi to KBUILD_CFLAGS, which is
a GCC only option so clang rightfully complains:

warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]

https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option

However, by default, this is merely a warning so the build happily goes
on with a slew of these warnings in the process.

Commit c3f0d0bc5b ("kbuild, LLVMLinux: Add -Werror to cc-option to
support clang") worked around this behavior in cc-option by adding
-Werror so that unknown flags cause an error. However, this all happens
silently and when an unknown flag is added to the build unconditionally
like -Wno-psabi, cc-option will always fail because there is always an
unknown flag in the list of flags. This manifested as link time failures
in the arm64 libstub because -fno-stack-protector didn't get added to
KBUILD_CFLAGS.

To avoid these weird cryptic failures in the future, make clang behave
like gcc and immediately error when it encounters an unknown flag by
adding -Werror=unknown-warning-option to CLANG_FLAGS. This can be added
unconditionally for clang because it is supported by at least 3.0.0,
according to godbolt [1] and 4.0.0, according to its documentation [2],
which is far earlier than we typically support.

[1]: https://godbolt.org/z/7F7rm3
[2]: https://releases.llvm.org/4.0.0/tools/clang/docs/DiagnosticsReference.html#wunknown-warning-option

Link: https://github.com/ClangBuiltLinux/linux/issues/511
Link: https://github.com/ClangBuiltLinux/linux/issues/517
Suggested-by: Peter Smith <peter.smith@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-24 03:43:03 +09:00
Linus Torvalds 4b972a01a7 Linux 5.2-rc6 2019-06-22 16:01:36 -07:00
Linus Torvalds 9e0babf2c0 Linux 5.2-rc5 2019-06-16 08:49:45 -10:00
Jani Nikula e846f0dc57 kbuild: add support for ensuring headers are self-contained
Sometimes it's useful to be able to explicitly ensure certain headers
remain self-contained, i.e. that they are compilable as standalone
units, by including and/or forward declaring everything they depend on.

Add special target header-test-y where individual Makefiles can add
headers to be tested if CONFIG_HEADER_TEST is enabled. This will
generate a dummy C file per header that gets built as part of extra-y.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:02 +09:00
Masahiro Yamada a5bae54c10 kbuild: move hdr-inst shorthand to top Makefile
Now that hdr-inst is used only in the top Makefile, move it there
from scripts/Kbuild.include.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:02 +09:00
Masahiro Yamada d5470d1443 kbuild: re-implement Makefile.headersinst without recursion
Since commit fcc8487d47 ("uapi: export all headers under uapi
directories"), the headers in uapi directories are all exported by
default although exceptional cases are still allowed by the syntax
'no-export-headers'.

The traditional directory descending has been kept (in a somewhat
hacky way), but it is actually unneeded.

Get rid of it to simplify the code.

Also, handle files one by one instead of the previous per-directory
processing. This will emit much more log, but I like it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:02 +09:00
Masahiro Yamada 59b2bd05f5 kbuild: add 'headers' target to build up uapi headers in usr/include
In Linux build system, build targets and installation targets are
separated.

Examples are:

 - 'make vmlinux' -> 'make install'
 - 'make modules' -> 'make modules_install'
 - 'make dtbs'    -> 'make dtbs_install'
 - 'make vdso'    -> 'make vdso_install'

The intention is to run the build targets under the normal privilege,
then the installation targets under the root privilege since we need
the write permission to the system directories.

We have 'make headers_install' but the corresponding 'make headers'
stage does not exist. The purpose of headers_install is to provide
the kernel interface to C library. So, nobody would try to install
headers to /usr/include directly.

If 'sudo make INSTALL_HDR_PATH=/usr/include headers_install' were run,
some build artifacts in the kernel tree would be owned by root because
some of uapi headers are generated by 'uapi-asm-generic', 'archheaders'
targets.

Anyway, I believe it makes sense to split the header installation into
two stages.

 [1] 'make headers'
    Process headers in uapi directories by scripts/headers_install.sh
    and copy them to usr/include

 [2] 'make headers_install'
    Copy '*.h' verbatim from usr/include to $(INSTALL_HDR_PATH)/include

For the backward compatibility, 'headers_install' depends on 'headers'.

Some samples expect uapi headers in usr/include. So, the 'headers'
target is useful to build up them in the fixed location usr/include
irrespective of INSTALL_HDR_PATH.

Another benefit is to stop polluting the final destination with the
time-stamp files '.install' and '.check'. Maybe you can see them in
your toolchains.

Lastly, my main motivation is to prepare for compile-testing uapi
headers. To build something, we have to save an object and .*.cmd
somewhere. The usr/include/ will be the work directory for that.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:02 +09:00
Masahiro Yamada bdd7714b6f kbuild: build all prerequisites of headers_install simultaneously
Currently, scripts/unifdef is compiled after scripts_basic,
uapi-asm-generic, archheaders, and archscripts.

The proper dependency is just scripts_basic. There is no problem
to compile scripts/unifdef and other headers at the same time.

Split scripts_unifdef out in order to allow more parallel building.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:02 +09:00
Masahiro Yamada 2b8481be3c kbuild: remove build_unifdef target in scripts/Makefile
Since commit 2aedcd098a ("kbuild: suppress annoying "... is up to date."
message"), if_changed and friends nicely suppress "is up to date" messages.

We do not need per-Makefile tricks.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:01 +09:00
Masahiro Yamada e949f4c2d6 kbuild: add CONFIG_HEADERS_INSTALL and loosen the dependency of samples
Commit 5318321d36 ("samples: disable CONFIG_SAMPLES for UML") used
a big hammer to fix the build errors under the samples/ directory.
Only some samples actually include uapi headers from usr/include.

Introduce CONFIG_HEADERS_INSTALL since 'depends on HEADERS_INSTALL' is
clearer than 'depends on !UML'. If this option is enabled, uapi headers
are installed before starting directory descending.

I added 'depends on HEADERS_INSTALL' to per-sample CONFIG options.
This allows UML to compile some samples.

$ make ARCH=um allmodconfig samples/
  [ snip ]
  CC [M]  samples/configfs/configfs_sample.o
  CC [M]  samples/kfifo/bytestream-example.o
  CC [M]  samples/kfifo/dma-example.o
  CC [M]  samples/kfifo/inttype-example.o
  CC [M]  samples/kfifo/record-example.o
  CC [M]  samples/kobject/kobject-example.o
  CC [M]  samples/kobject/kset-example.o
  CC [M]  samples/trace_events/trace-events-sample.o
  CC [M]  samples/trace_printk/trace-printk.o
  AR      samples/vfio-mdev/built-in.a
  AR      samples/built-in.a

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:01 +09:00
Masahiro Yamada 7a739ce51d kbuild: make gdb_script depend on prepare0 instead of prepare
'gdb_script' needs headers generated by ./Kbuild, which is visited
by 'prepare0'. None of 'gdb_script' depends on 'prepare'.

Loosen the dependency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:01 +09:00
Masahiro Yamada 3a51f9081e kbuild: remove stale dependency between Documentation/ and headers_install
Commit 8e2faea877 ("Make Documenation depend on headers_install")
dates back to 2014, which is before Sphinx was introduced for the
kernel documentation.

Since none of DOC_TARGET requires headers_install, it is strange to
run it only for the single target "Documentation/".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15 19:57:01 +09:00
Masahiro Yamada f3c8d4c7a7 kbuild: remove headers_{install,check}_all
headers_install_all does not make much sense any more because different
architectures export different set of uapi/linux/ headers. As you see
in include/uapi/linux/Kbuild, the installation of a.out.h, kvm.h, and
kvm_para.h is arch-dependent. So, headers_install_all repeats the
installation/removal of them.

If somebody really thinks it is useful to do headers_install for all
architectures, it would be possible by small shell-scripting, but
the top Makefile does not have to provide entry targets just for that
purpose.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-06-15 19:57:01 +09:00
Linus Torvalds d1fdb6d8f6 Linux 5.2-rc4 2019-06-08 20:24:46 -07:00
Dan Rue 6d3db46c8e kbuild: teach kselftest-merge to find nested config files
Current implementation of kselftest-merge only finds config files that
are one level deep using `$(srctree)/tools/testing/selftests/*/config`.

Often, config files are added in nested directories, and do not get
picked up by kselftest-merge.

Use `find` to catch all config files under
`$(srctree)/tools/testing/selftests` instead.

Signed-off-by: Dan Rue <dan.rue@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-05 02:33:10 +09:00
Linus Torvalds f2c7c76c5d Linux 5.2-rc3 2019-06-02 13:55:33 -07:00
Linus Torvalds cd6c84d8f0 Linux 5.2-rc2 2019-05-26 16:49:19 -07:00
Linus Torvalds a188339ca5 Linux 5.2-rc1 2019-05-19 15:47:09 -07:00
Masahiro Yamada 3a48a91901 kbuild: check uniqueness of module names
In the recent build test of linux-next, Stephen saw a build error
caused by a broken .tmp_versions/*.mod file:

  https://lkml.org/lkml/2019/5/13/991

drivers/net/phy/asix.ko and drivers/net/usb/asix.ko have the same
basename, and there is a race in generating .tmp_versions/asix.mod

Kbuild has not checked this before, and it suddenly shows up with
obscure error messages when this kind of race occurs.

Non-unique module names cause various sort of problems, but it is
not trivial to catch them by eyes.

Hence, this script.

It checks not only real modules, but also built-in modules (i.e.
controlled by tristate CONFIG option, but currently compiled with =y).
Non-unique names for built-in modules also cause problems because
/sys/modules/ would fall over.

For the latest kernel, I tested "make allmodconfig all" (or more
quickly "make allyesconfig modules"), and it detected the following:

warning: same basename if the following are built as modules:
  drivers/regulator/88pm800.ko
  drivers/mfd/88pm800.ko
warning: same basename if the following are built as modules:
  drivers/gpu/drm/bridge/adv7511/adv7511.ko
  drivers/media/i2c/adv7511.ko
warning: same basename if the following are built as modules:
  drivers/net/phy/asix.ko
  drivers/net/usb/asix.ko
warning: same basename if the following are built as modules:
  fs/coda/coda.ko
  drivers/media/platform/coda/coda.ko
warning: same basename if the following are built as modules:
  drivers/net/phy/realtek.ko
  drivers/net/dsa/realtek.ko

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2019-05-18 15:35:02 +09:00
Masahiro Yamada 233c741dcb kbuild: add LICENSES to KBUILD_ALLDIRS
For *-pkg targets, the LICENSES directory should be included in the
source tarball.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18 11:49:57 +09:00
Masahiro Yamada 902a6898bf kbuild: terminate Kconfig when $(CC) or $(LD) is missing
If the compiler specified by $(CC) is not present, the Kconfig stage
sprinkles 'not found' messages, then succeeds.

  $ make CROSS_COMPILE=foo defconfig
  /bin/sh: 1: foogcc: not found
  /bin/sh: 1: foogcc: not found
  *** Default configuration is based on 'x86_64_defconfig'
  ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 17: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 18: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/gcc-version.sh: 19: ./scripts/gcc-version.sh: foogcc: not found
  ./scripts/clang-version.sh: 11: ./scripts/clang-version.sh: foogcc: not found
  ./scripts/gcc-plugin.sh: 11: ./scripts/gcc-plugin.sh: foogcc: not found
  init/Kconfig:16:warning: 'GCC_VERSION': number is invalid
  #
  # configuration written to .config
  #

Terminate parsing files immediately if $(CC) or $(LD) is not found.
"make *config" will fail more nicely.

  $ make CROSS_COMPILE=foo defconfig
  *** Default configuration is based on 'x86_64_defconfig'
  scripts/Kconfig.include:34: compiler 'foogcc' not found
  make[1]: *** [scripts/kconfig/Makefile;82: defconfig] Error 1
  make: *** [Makefile;557: defconfig] Error 2

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18 11:49:55 +09:00
Masahiro Yamada d2f8ae0e4c kbuild: turn auto.conf.cmd into a mandatory include file
syncconfig is responsible for keeping auto.conf up-to-date, so if it
fails for any reason, the build must be terminated immediately.

However, since commit 9390dff66a ("kbuild: invoke syncconfig if
include/config/auto.conf.cmd is missing"), Kbuild continues running
even after syncconfig fails.

You can confirm this by intentionally making syncconfig error out:

  diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
  index 08ba146..307b9de 100644
  --- a/scripts/kconfig/confdata.c
  +++ b/scripts/kconfig/confdata.c
  @@ -1023,6 +1023,9 @@ int conf_write_autoconf(int overwrite)
          FILE *out, *tristate, *out_h;
          int i;

  +       if (overwrite)
  +               return 1;
  +
          if (!overwrite && is_present(autoconf_name))
                  return 0;

Then, syncconfig fails, but Make would not stop:

  $ make -s mrproper allyesconfig defconfig
  $ make
  scripts/kconfig/conf  --syncconfig Kconfig

  *** Error during sync of the configuration.

  make[2]: *** [scripts/kconfig/Makefile;69: syncconfig] Error 1
  make[1]: *** [Makefile;557: syncconfig] Error 2
  make: *** [include/config/auto.conf.cmd] Deleting file 'include/config/tristate.conf'
  make: Failed to remake makefile 'include/config/auto.conf'.
    SYSTBL  arch/x86/include/generated/asm/syscalls_32.h
    SYSHDR  arch/x86/include/generated/asm/unistd_32_ia32.h
    SYSHDR  arch/x86/include/generated/asm/unistd_64_x32.h
    SYSTBL  arch/x86/include/generated/asm/syscalls_64.h
  [ continue running ... ]

The reason is in the behavior of a pattern rule with multi-targets.

  %/auto.conf %/auto.conf.cmd %/tristate.conf: $(KCONFIG_CONFIG)
          $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig

GNU Make knows this rule is responsible for making all the three files
simultaneously. As far as examined, auto.conf.cmd is the target in
question when this rule is invoked. It is probably because auto.conf.cmd
is included below the inclusion of auto.conf.

The inclusion of auto.conf is mandatory, while that of auto.conf.cmd
is optional. GNU Make does not care about the failure in the process
of updating optional include files.

I filed this issue (https://savannah.gnu.org/bugs/?56301) in case this
behavior could be improved somehow in future releases of GNU Make.
Anyway, it is quite easy to fix our Makefile.

Given that auto.conf is already a mandatory include file, there is no
reason to stick auto.conf.cmd optional. Make it mandatory as well.

Cc: linux-stable <stable@vger.kernel.org> # 5.0+
Fixes: 9390dff66a ("kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18 11:49:54 +09:00
Masahiro Yamada a149430434 kbuild: add all Clang-specific flags unconditionally
We do not support old Clang versions. Upgrade your clang version
if any of these flags is unsupported.

Let's add all flags inside ifdef CONFIG_CC_IS_CLANG unconditionally.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-05-18 11:49:53 +09:00
Nathan Chancellor 7eb8e5f073 kbuild: Don't try to add '-fcatch-undefined-behavior' flag
This is no longer a valid option in clang, it was removed in 3.5, which
we don't support.

cb3f812b6b

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18 11:49:53 +09:00
Masahiro Yamada 8289f913fe kbuild: add -Wvla flag unconditionally
This flag is documented in the GCC 4.6 manual, and recognized by
Clang as well. Let's rip off the cc-option switch.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2019-05-18 11:49:52 +09:00
Masahiro Yamada a3bc88645e kbuild: re-enable int-in-bool-context warning
This warning was disabled by commit bd664f6b3e ("disable new
gcc-7.1.1 warnings for now") just because it was too noisy.

Thanks to Arnd Bergmann, all warnings have been fixed. Now, we are
ready to re-enable it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2019-05-18 11:29:01 +09:00
Linus Torvalds 2646719a48 Kbuild updates for v5.2
- allow users to invoke 'make' out of the source tree
 
 - refactor scripts/mkmakefile
 
 - deprecate KBUILD_SRC, which was used to track the source tree
   location for O= build.
 
 - fix recordmcount.pl in case objdump output is localized
 
 - turn unresolved symbols in external modules to errors from warnings
   by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
 
 - generate modules.builtin.modinfo to collect .modinfo data from
   built-in modules
 
 - misc Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJc0upmAAoJED2LAQed4NsGreoP/jkKQojVdzTjM/nn/Xe9FrE9
 elQ59Wu/gW/q7jouN733WTJ2fRPAEVaGPw/CT/cCRWjNJjd6MM4voDKVxifZE+u4
 qz5XUGq4Mjozd0MJdU1LA1dIRJrEaPofOj7E0JEIerEdLPKpv4kjCCbbHOZwN2Kl
 YrpPFJkYspCRVG+txEWY8YaZeU/+OAdNckJnMkX8hnUwsNplAlPw4L/5Y12Uncuz
 7g/3T1f701pJhStoO4OPR/+Rivi0EX5AP7TZyv2/FOwTO+Oau5G1rF0j1BT0+ceg
 d+bApuaHLR4ocZ6GvWfACMYhH7ais0BUgAwi6HY/b78SGMmNB6xlD5biVqcklx6c
 mjrPNaj6WJEQIflZ3yr83tRNhTu7xXRKZkrGHHUjOGNsRULuD8RFrXtusl06A22S
 hA3vt2SF4FuLBabPw5yFkKNOTX+P5dG79BC1fWIQjglBGoYqWTRQNYoottr/7t2T
 Si+E6J2lAD0EDNuc/EFKWfrgONfatgcdgQuTibwCcE2KfYnMG/C+9DvxRV4lAQtn
 fYpap9gws+0AisbVx0m1W088NMFiwrMbN3n3KITGY/15XDmeySEA1QgPKFN8JHJd
 Do0duaMx8BHjkA5ms/Bf0AZd0tWUkWVdt0epwU2KafWNGK7VaPnhKxn5eQOGkWV+
 gT3J3XZc3b7OEOQ4XX3Z
 =zj9w
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - allow users to invoke 'make' out of the source tree

 - refactor scripts/mkmakefile

 - deprecate KBUILD_SRC, which was used to track the source tree
   location for O= build.

 - fix recordmcount.pl in case objdump output is localized

 - turn unresolved symbols in external modules to errors from warnings
   by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings

 - generate modules.builtin.modinfo to collect .modinfo data from
   built-in modules

 - misc Makefile cleanups

* tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
  .gitignore: add more all*.config patterns
  moduleparam: Save information about built-in modules in separate file
  Remove MODULE_ALIAS() calls that take undefined macro
  .gitignore: add leading and trailing slashes to generated directories
  scripts/tags.sh: fix direct execution of scripts/tags.sh
  scripts: override locale from environment when running recordmcount.pl
  samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y
  samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option
  kbuild: move Documentation to vmlinux-alldirs
  kbuild: move samples/ to KBUILD_VMLINUX_OBJS
  modpost: make KBUILD_MODPOST_WARN also configurable for external modules
  kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build
  kbuild: remove unneeded dependency for include/config/kernel.release
  memory: squash drivers/memory/Makefile.asm-offsets
  kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build
  kbuild: mkmakefile: generate a simple wrapper of top Makefile
  kbuild: mkmakefile: do not check the generated Makefile marker
  kbuild: allow Kbuild to start from any directory
  kbuild: pass $(MAKECMDGOALS) to sub-make as is
  kbuild: fix warning "overriding recipe for target 'Makefile'"
  ...
2019-05-08 12:25:12 -07:00
Linus Torvalds 80f232121b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...
2019-05-07 22:03:58 -07:00
Linus Torvalds 2d60d96b6f compiler-based memory initialization
- Consolidate memory initialization Kconfigs (Kees)
 - Implement support for Clang's stack variable auto-init (Alexander)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlzQafUWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJrTfEAChweGM23u8i0vOgGM4fYAXr9di
 THoKkgEGgQJJaArgElEuZgwos8uhH2rGhQ2zcY38ZFA20byBZ/G8jFNXNuzFgUyQ
 6p5DUU2P2qam+v/cXvFqBqbXg4VzmlwR6Lzi9DHZ3XC41kz5YUWqHTq3md1uCU82
 V2Z0V3xF7Zvjx14V42UzEqW66l3dUrYPOFSJVTCMC5vaJvov3gFjStRkYuSzYg+N
 1ns7SdT8sQvXeAoj1VSeunNuv8iCVytFWC6f0cIs3iCt9nD/IYk1d9Zl6MAqive2
 5sKDhUKBzg03xB1rztDmxZKAyN3YYoZFfJr3PruSvUiMxYYtX3IMvKFI257RQl8J
 WYP5qa0kHHM1uel5kS4fckzAv+oqNnnXgdSy5ajc1YFcdBxwiy6DfvBjk843DyU/
 +OLb1wh5Uz6ICg6GILgVoL5nZinnj73zgj78bfRemiy1j7LZVtkX0EDAwIJxE2U9
 SYYeEvUu91jNbkE9ugu8RXmXv1QctOuiBr70VLupVu/a7AJij6Cq8Ox9uge25DRF
 XnuVjXCpMdx6p6i1kaNXZtxREK4at0J2CCIqGyzFpRgym2OpyJBIgVEWDMsfof0w
 HOKUpbp7TytVdRoEWcwU32oGBa/e0PbJ2KSNK0t+5bKeIOTxFJf1qeWwaWXu3JQE
 DRYx7/sVHjGUXsSNeg==
 =i0Gi
 -----END PGP SIGNATURE-----

Merge tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull compiler-based variable initialization updates from Kees Cook:
 "This is effectively part of my gcc-plugins tree, but as this adds some
  Clang support, it felt weird to still call it "gcc-plugins". :)

  This consolidates Kconfig for the existing stack variable
  initialization (via structleak and stackleak gcc plugins) and adds
  Alexander Potapenko's support for Clang's new similar functionality.

  Summary:

   - Consolidate memory initialization Kconfigs (Kees)

   - Implement support for Clang's stack variable auto-init (Alexander)"

* tag 'meminit-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  security: Implement Clang's stack initialization
  security: Move stackleak config to Kconfig.hardening
  security: Create "kernel hardening" config area
2019-05-07 12:44:49 -07:00
Linus Torvalds 573de2a6e8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina:

 - livepatching kselftests improvements from Joe Lawrence and Miroslav
   Benes

 - making use of gcc's -flive-patching option when available, from
   Miroslav Benes

 - kobject handling cleanups, from Petr Mladek

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Remove duplicated code for early initialization
  livepatch: Remove custom kobject state handling
  livepatch: Convert error about unsupported reliable stacktrace into a warning
  selftests/livepatch: Add functions.sh to TEST_PROGS_EXTENDED
  kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled
  selftests/livepatch: use TEST_PROGS for test scripts
2019-05-07 08:56:04 -07:00
Alexey Gladkov 898490c010 moduleparam: Save information about built-in modules in separate file
Problem:

When a kernel module is compiled as a separate module, some important
information about the kernel module is available via .modinfo section of
the module.  In contrast, when the kernel module is compiled into the
kernel, that information is not available.

Information about built-in modules is necessary in the following cases:

1. When it is necessary to find out what additional parameters can be
passed to the kernel at boot time.

2. When you need to know which module names and their aliases are in
the kernel. This is very useful for creating an initrd image.

Proposal:

The proposed patch does not remove .modinfo section with module
information from the vmlinux at the build time and saves it into a
separate file after kernel linking. So, the kernel does not increase in
size and no additional information remains in it. Information is stored
in the same format as in the separate modules (null-terminated string
array). Because the .modinfo section is already exported with a separate
modules, we are not creating a new API.

It can be easily read in the userspace:

$ tr '\0' '\n' < modules.builtin.modinfo
ext4.softdep=pre: crc32c
ext4.license=GPL
ext4.description=Fourth Extended Filesystem
ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others
ext4.alias=fs-ext4
ext4.alias=ext3
ext4.alias=fs-ext3
ext4.alias=ext2
ext4.alias=fs-ext2
md_mod.alias=block-major-9-*
md_mod.alias=md
md_mod.description=MD RAID framework
md_mod.license=GPL
md_mod.parmtype=create_on_open:bool
md_mod.parmtype=start_dirty_degraded:int
...

Co-Developed-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-07 21:50:24 +09:00
Linus Torvalds e93c9c99a6 Linux 5.1 2019-05-05 17:42:58 -07:00
Masahiro Yamada 1eaca4b982 kbuild: move Documentation to vmlinux-alldirs
A minor code cleanup.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-03 23:04:59 +09:00
Masahiro Yamada d93a18f27e kbuild: move samples/ to KBUILD_VMLINUX_OBJS
Handle samples/ like the other top-level directories to simplify
the Makefile.

Include include/config/auto.conf earlier to evaluate
drivers-$(CONFIG_SAMPLES).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-03 23:04:59 +09:00
David S. Miller ff24e4980a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three trivial overlapping conflicts.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02 22:14:21 -04:00
Linus Torvalds 6f303d6053 gcc-9: silence 'address-of-packed-member' warning
We already did this for clang, but now gcc has that warning too.  Yes,
yes, the address may be unaligned.  And that's kind of the point.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-01 11:05:41 -07:00
Linus Torvalds 37624b5854 Linux 5.1-rc7 2019-04-28 17:04:13 -07:00
David S. Miller 8b44836583 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two easy cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25 23:52:29 -04:00
Kees Cook 709a972efb security: Implement Clang's stack initialization
CONFIG_INIT_STACK_ALL turns on stack initialization based on
-ftrivial-auto-var-init in Clang builds, which has greater coverage
than CONFIG_GCC_PLUGINS_STRUCTLEAK_BYREF_ALL.

-ftrivial-auto-var-init Clang option provides trivial initializers for
uninitialized local variables, variable fields and padding.

It has three possible values:
  pattern - uninitialized locals are filled with a fixed pattern
    (mostly 0xAA on 64-bit platforms, see https://reviews.llvm.org/D54604
    for more details, but 0x000000AA for 32-bit pointers) likely to cause
    crashes when uninitialized value is used;
  zero (it's still debated whether this flag makes it to the official
    Clang release) - uninitialized locals are filled with zeroes;
  uninitialized (default) - uninitialized locals are left intact.

This patch uses only the "pattern" mode when CONFIG_INIT_STACK_ALL is
enabled.

Developers have the possibility to opt-out of this feature on a
per-variable basis by using __attribute__((uninitialized)), but such
use should be well justified in comments.

Co-developed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-24 14:00:56 -07:00
Linus Torvalds 085b775580 Linux 5.1-rc6 2019-04-21 10:45:57 -07:00
David S. Miller 6b0a7f84ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflict resolution of af_smc.c from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17 11:26:25 -07:00
Linus Torvalds dc4060a5dc Linux 5.1-rc5 2019-04-14 15:17:41 -07:00
David S. Miller bb23581b9b Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2019-04-12

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Improve BPF verifier scalability for large programs through two
   optimizations: i) remove verifier states that are not useful in pruning,
   ii) stop walking parentage chain once first LIVE_READ is seen. Combined
   gives approx 20x speedup. Increase limits for accepting large programs
   under root, and add various stress tests, from Alexei.

2) Implement global data support in BPF. This enables static global variables
   for .data, .rodata and .bss sections to be properly handled which allows
   for more natural program development. This also opens up the possibility
   to optimize program workflow by compiling ELFs only once and later only
   rewriting section data before reload, from Daniel and with test cases and
   libbpf refactoring from Joe.

3) Add config option to generate BTF type info for vmlinux as part of the
   kernel build process. DWARF debug info is converted via pahole to BTF.
   Latter relies on libbpf and makes use of BTF deduplication algorithm which
   results in 100x savings compared to DWARF data. Resulting .BTF section is
   typically about 2MB in size, from Andrii.

4) Add BPF verifier support for stack access with variable offset from
   helpers and add various test cases along with it, from Andrey.

5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header
   so that L2 encapsulation can be used for tc tunnels, from Alan.

6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that
   users can define a subset of allowed __sk_buff fields that get fed into
   the test program, from Stanislav.

7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up
   various UBSAN warnings in bpftool, from Yonghong.

8) Generate a pkg-config file for libbpf, from Luca.

9) Dump program's BTF id in bpftool, from Prashant.

10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP
    program, from Magnus.

11) kallsyms related fixes for the case when symbols are not present in
    BPF selftests and samples, from Daniel
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11 17:00:05 -07:00
Masahiro Yamada a788b2ed81 kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build
After cross-compiling the kernel, "make mrproper" should be executed
with the proper ARCH= option. Otherwise, stale objects will remain
under arch/$(SRCARCH)/.

One bad scenario is like this:

  $ make ARCH=arm defconfig all   # cross-compile the kernel for arm
  $ make mrproper                 # mrproper for host-arch (i.e. x86)
  $ make ARCH=arm O=build_dir defconfig all

If you miss ARCH= for mrproper and cross-compile the kernel with O=
and ARCH= options, Kbuild will happily start to build, but may fail
due to stale objects in the srctree.

If $(srctree)/arch/$(SRCARCH)/include/generated/ exists, let's stop
the out-of-tree build. To detect this, mrproper should clean only
arch/$(SRCARCH)/include/generated/.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-09 22:51:56 +09:00
Masahiro Yamada 24512795df kbuild: remove unneeded dependency for include/config/kernel.release
This is unneeded since commit 43fee2b238 ("kbuild: do not redirect
the first prerequisite for filechk").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-09 22:51:53 +09:00
Miroslav Benes 43bd3a95c9 kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled
GCC 9 introduces a new option, -flive-patching. It disables certain
optimizations which could make a compilation unsafe for later live
patching of the running kernel.

The option is used only if CONFIG_LIVEPATCH is enabled and $(CC)
supports it.

Performance impact of the option was measured on three different
Intel machines - two bigger NUMA boxes and one smaller UMA box. Kernel
intensive (IO, scheduling, networking) benchmarks were selected, plus a
set of HPC workloads from NAS Parallel Benchmark. The tests were done on
upstream kernel 5.0-rc8 with openSUSE Leap 15.0 userspace.

The majority of the tests is unaffected. The only significant exception
is the scheduler section which suffers 1-3% degradation.

Evaluated-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-04-08 16:48:52 +02:00
Linus Torvalds 15ade5d2e7 Linux 5.1-rc4 2019-04-07 14:09:59 -10:00
Andrii Nakryiko e83b9f5544 kbuild: add ability to generate BTF type info for vmlinux
This patch adds new config option to trigger generation of BTF type
information from DWARF debuginfo for vmlinux and kernel modules through
pahole, which in turn relies on libbpf for btf_dedup() algorithm.

The intent is to record compact type information of all types used
inside kernel, including all the structs/unions/typedefs/etc. This
enables BPF's compile-once-run-everywhere ([0]) approach, in which
tracing programs that are inspecting kernel's internal data (e.g.,
struct task_struct) can be compiled on a system running some kernel
version, but would be possible to run on other kernel versions (and
configurations) without recompilation, even if the layout of structs
changed and/or some of the fields were added, removed, or renamed.

This is only possible if BPF loader can get kernel type info to adjust
all the offsets correctly. This patch is a first time in this direction,
making sure that BTF type info is part of Linux kernel image in
non-loadable ELF section.

BTF deduplication ([1]) algorithm typically provides 100x savings
compared to DWARF data, so resulting .BTF section is not big as is
typically about 2MB in size.

[0] http://vger.kernel.org/lpc-bpf2018.html#session-2
[1] https://facebookmicrosites.github.io/bpf/blog/2018/11/14/btf-enhancement.html

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-03 00:53:07 +02:00
Masahiro Yamada a9a49c2ad9 kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build
KBUILD_SRC was conventionally used for some different purposes:
 [1] To remember the source tree path
 [2] As a flag to check if sub-make is already done
 [3] As a flag to check if Kbuild runs out of tree

For [1], we do not need to remember it because the top Makefile
can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST))))

[2] has been replaced with self-commenting 'sub_make_done'.

For [3], we can distinguish in-tree/out-of-tree by comparing
$(srctree) and '.'

This commit converts [3] to prepare for the KBUILD_SRC removal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-02 23:28:04 +09:00
Masahiro Yamada 25b146c5b8 kbuild: allow Kbuild to start from any directory
Kbuild always runs in the top of the output directory.

If Make starts in the source directory with O=, it relocates the
working directory to the location specified by O=.

Also, users can start build from the output directory by using the
Makefile generated by scripts/mkmakefile.

With a little more effort, Kbuild will be able to start from any
directory path.

This commit allows to specify the source directory by using
the -f option.

For example, you can do:

  $ cd path/to/output/dir
  $ make -f path/to/source/dir/Makefile

Or, for the equivalent behavior, you can do:

  $ make O=path/to/output/dir -f path/to/source/dir/Makefile

KBUILD_SRC is now deprecated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kieran Bingham <kbingham@kernel.org>
2019-04-02 23:27:15 +09:00
Masahiro Yamada 6b1a9a02c7 kbuild: pass $(MAKECMDGOALS) to sub-make as is
Manipulating $(MAKECMDGOALS) for sub-make seems odd to me.

[1] 'make O=foo sub-make' is turned into 'make O=foo', which builds
the default targets. It would make sense to terminate the build with:

  *** No rule to make target 'sub-make'.  Stop.

[2] 'make O=foo defconfig _all' is turned into 'make O=foo defconfig',
which changes the behavior.

Let's pass $(MAKECMDGOALS) as is.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-01 10:06:00 +09:00
Masahiro Yamada 0209987fc8 kbuild: fix warning "overriding recipe for target 'Makefile'"
If you do "make Makefile" with GNU Make 3.x, the following warning
is displayed:

  $ make Makefile
  Makefile:165: warning: overriding recipe for target 'Makefile'
  Makefile:51: warning: ignoring old recipe for target 'Makefile'
  make[1]: Nothing to be done for 'Makefile'.
  make: Nothing to be done for 'Makefile'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-01 10:06:00 +09:00
Masahiro Yamada 669e06b19d kbuild: move RETPOLINE flags below config-targets
When you run a "make *config" target, the retpoline compiler flags
are evaluated for nothing because the code is located above the
'ifeq ($(config-targets),1)'.

Move it a bit below to avoid unneeded computation in the Kconfig stage.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-01 10:06:00 +09:00
Linus Torvalds 79a3aaa7b8 Linux 5.1-rc3 2019-03-31 14:39:29 -07:00
Linus Torvalds f78b5be2a5 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
 "A small set of core updates:

   - Make the watchdog respect the selected CPU mask again. That was
     broken by the rework of the watchdog thread management and caused
     inconsistent state and NMI watchdog being unstoppable.

   - Ensure that the objtool build can find the libelf location.

   - Remove dead kcore stub code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog: Respect watchdog cpumask on CPU hotplug
  objtool: Query pkg-config for libelf location
  proc/kcore: Remove unused kclist_add_remap()
2019-03-31 07:47:21 -07:00
Linus Torvalds 0e40da3efe Kbuild fixes for v5.1
- Remove harmful -Oz option of Clang
 
  - Get back the original behavior (no recursion for in-tree build)
    for GNU Make 4.x
 
  - Some minor fixes for coccinelle patches
 
  - Do not overwrite .gitignore in the output directory in case
    it is version-controlled
 
  - Fix missed record-mcount bug for dynamic ftrace
 
  - Fix endianness bug in modversions for relative CRC
 
  - Cater to '^H' key code in Kconfig ncurses programs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcniYbAAoJED2LAQed4NsGD7gP/jfPDVUekRMycnE4X/D2UkjP
 cBCVy/679Mk8pJbfeygKXXG0vHQWBkaq96Q2JGHiEGBMvF0xSCutEBTnexM7+H9d
 wrqe4lozHkdBanoVhhKlFmNZsHmdCfeFtYmhgyFSHi2+afoRO2Fd7KJaRil35uIe
 RZJsqiTYmjH8LvqXWUo9RN1gia25fNCSsBU7VplthhsZbHulC2gxJJRElTRk0qTn
 Kad/bJQRQ48MqZO4dWLw/BzCJuOppZxs8kwa8vErgmcBIU3foutKQRCLqxcfIYGk
 Y6kgU3+cfKpPiZC4Gnf2RuiSV5GOPHjeizIuQ+fDJTJsUr6P/nTZU22Rrs7NPhO5
 808XTO0krYNtJRPia58/NCCjNNm4jUSQF+JyDPiOfHzr30SI19SM57V1K0ZAmItv
 5yF0o3953sJCnk2IVaErG5VA9E/O35dBg1SOjSeODexklynrcOsv4z+SYlgbzgXm
 T+OLLR6BeZnxYYVLih9WTvnMahCnF08bxJj64CcwYJ03UE+pIcwlU2s3PWTBVpBv
 +Ij8H4KvrFhpUBq20KHfQhciAC8OxpayvHEWwA6LA3IHUxkl1T9UnKtlQA+l+Nxj
 SO4JtbS2zgI5rVt9S/hVMHPTeUXvMaFVMYhSRTnMYQL6fzuzaFijOkcFwUqDdsM2
 CH+HyvWpjLWNjWZ/DNcD
 =6tE2
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Remove harmful -Oz option of Clang

 - Get back the original behavior (no recursion for in-tree build) for
   GNU Make 4.x

 - Some minor fixes for coccinelle patches

 - Do not overwrite .gitignore in the output directory in case it is
   version-controlled

 - Fix missed record-mcount bug for dynamic ftrace

 - Fix endianness bug in modversions for relative CRC

 - Cater to '^H' key code in Kconfig ncurses programs

* tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig/[mn]conf: handle backspace (^H) key
  kbuild: modversions: Fix relative CRC byte order interpretation
  scripts: coccinelle: Fix description of badty.cocci
  kbuild: strip whitespace in cmd_record_mcount findstring
  kbuild: do not overwrite .gitignore in output directory
  kbuild: skip parsing pre sub-make code for recursion
  coccinelle: put_device: reduce false positives
  kbuild: skip sub-make for in-tree build with GNU Make 4.x
  Revert "kbuild: use -Oz instead of -Os when using clang"
2019-03-29 14:46:00 -07:00
Masahiro Yamada 156e7cbb3e kbuild: do not overwrite .gitignore in output directory
Commit 3a51ff3442 ("kbuild: gitignore output directory") seemed to
bother people who version-control output directories.

Andre Przywara says:
"Unfortunately this breaks my setup, because I keep a totally separate
git repository in my build directories to track (various versions of)
.config. So .gitignore there is carefully crafted to ignore most build
artefacts, but not .config, for instance."

Link: https://lkml.org/lkml/2019/3/22/1819
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2019-03-28 23:46:55 +09:00
Masahiro Yamada 221cc2d27d kbuild: skip parsing pre sub-make code for recursion
When Make recurses to the top Makefile with sub-make-done unset,
the code block surrounded by 'ifneq ($(sub-make-done),1) ... endif'
is parsed multiple times. This happens for in-tree building of
include/config/auto.conf, *-pkg, etc. with GNU Make 4.x.

This is a slight regression by commit 688931a5ad ("kbuild: skip
sub-make for in-tree build with GNU Make 4.x") in terms of performance
since that code block contains one $(shell ...) invocation.

Fix it by exporting the variable irrespective of sub-make being run.
I renamed it because GNU Make cannot properly export variables
containing hyphens. This is probably a bug of GNU Make, and the issue
in Kbuild had already been reported by commit 2bfbe7881e ("kbuild:
Do not use hyphen in exported variable name").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-28 23:46:54 +09:00
Rolf Eike Beer 056d28d135 objtool: Query pkg-config for libelf location
If it is not in the default location, compilation fails at several points.

Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/91a25e992566a7968fedc89ec80e7f4c83ad0548.1553622500.git.jpoimboe@redhat.com
2019-03-28 13:32:01 +01:00
Linus Torvalds 8c2ffd9174 Linux 5.1-rc2 2019-03-24 14:02:26 -07:00
Masahiro Yamada 688931a5ad kbuild: skip sub-make for in-tree build with GNU Make 4.x
Commit 2b50f7ab63 ("kbuild: add workaround for Debian make-kpkg")
annoyed people who want to wrap the top Makefile with GNUmakefile
to customize it for their use.

On second thought, we do not need to run the sub-make for in-tree
build with Make 4.x because the 'MAKEFLAGS += -rR' issue only happens
on GNU Make 3.x.

With this commit, people will get back their workflow, and the Debian
make-kpkg will still work.

Fixes: 2b50f7ab63 ("kbuild: add workaround for Debian make-kpkg")
Reported-by: Andreas Schwab <schwab@suse.de>
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Andreas Schwab <schwab@suse.de>
Tested-by: David Howells <dhowells@redhat.com>
2019-03-21 10:03:11 +09:00
Matthias Kaehlcke a75bb4eb9e Revert "kbuild: use -Oz instead of -Os when using clang"
The clang option -Oz enables *aggressive* optimization for size,
which doesn't necessarily result in smaller images, but can have
negative impact on performance. Switch back to the less aggressive
-Os.

This reverts commit 6748cb3c29.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-20 22:27:29 +09:00
Linus Torvalds 9e98c678c2 Linux 5.1-rc1 2019-03-17 14:22:26 -07:00
Masahiro Yamada 037fc3368b kbuild: force all architectures except um to include mandatory-y
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.

um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17 12:56:32 +09:00
Douglas Anderson 0c22be0712 kbuild: Make NOSTDINC_FLAGS a simply expanded variable
During a simple no-op (nothing changed) build I saw 39 invocations of
the C compiler with the argument "-print-file-name=include".  We don't
need to call the C compiler 39 times for this--one time will suffice.

Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid
this since there doesn't appear to be any reason it should be
recursively expanded.

On my build this shaved ~400 ms off my "no-op" build.

Note that the recursive expansion seems to date back to the (really
old) commit e8f5bdb02c ("[PATCH] Makefile include path ordering").
It's a little unclear to me if the point of that patch was to switch
the variable to be recursively expanded (which it did) or to avoid
directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because
someone else (out of tree?) was setting it.  I presume later since if
the only goal was to switch to recursive expansion the patch would
have just removed the ":".

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17 12:56:30 +09:00
Masahiro Yamada 2b50f7ab63 kbuild: add workaround for Debian make-kpkg
Since commit 3812b8c5c5 ("kbuild: make -r/-R effective in top
Makefile for old Make versions"), make-kpkg is not working.

make-kpkg directly includes the top Makefile of Linux kernel, and
appends some debian_* targets.

  /usr/share/kernel-package/ruleset/kernel_version.mk:

    # Include the kernel makefile
    override dot-config := 1
    include Makefile
    dot-config := 1

I did not know the kernel Makefile was used in that way, and it is
hard to guarantee the behavior when the kernel Makefile is included
by another Makefile from a different project.

It looks like Debian Stretch stopped providing make-kpkg. Maybe it is
obsolete and being replaced with 'make deb-pkg' etc. but still widely
used.

This commit adds a workaround; if the top Makefile is included by
another Makefile, skip sub-make in order to make the main part visible.
'MAKEFLAGS += -rR' does not become effective for GNU Make < 4.0, but
Debian/Ubuntu is already using newer versions.

The effect of this commit:

  Debian 8 (Jessie)  : Fixed
  Debian 9 (Stretch) : make-kpkg (kernel-package) is not provided
  Ubuntu 14.04 LTS   : NOT Fixed
  Ubuntu 16.04 LTS   : Fixed
  Ubuntu 18.04 LTS   : Fixed

This commit cannot fix Ubuntu 14.04 because it installs GNU Make 3.81,
but its support will end in Apr 2019, which is before the Linux v5.1
release.

I added warning so that nobody would try to include the top Makefile.

Fixes: 3812b8c5c5 ("kbuild: make -r/-R effective in top Makefile for old Make versions")
Reported-by: Liz Zhang <lizzha@microsoft.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Lili Deng <v-lide@microsoft.com>
Cc: Manoj Srivastava <srivasta@debian.org>
2019-03-14 02:39:12 +09:00
Linus Torvalds ffd602eb46 Kbuild updates for v5.1
- do not generate unneeded top-level built-in.a
 
  - let git ignore O= directory entirely
 
  - optimize scripts/kallsyms slightly
 
  - exclude DWARF info from *.s regardless of config options
 
  - fix GCC toolchain search path for Clang to prepare ld.lld support
 
  - do not generate modules.order when CONFIG_MODULES is disabled
 
  - simplify single target rules and remove VPATH for external module build
 
  - allow to add optional flags to dpkg-buildpackage when building deb-pkg
 
  - move some compiler option tests from Makefile to Kconfig
 
  - various Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcgxYUAAoJED2LAQed4NsGr7YQAJq4LmN/aZDI9Mt0YAQjEyyA
 PCpm8J2HI9HO1sMoY7J/ksWmV0BU25G+uspKD7dXAQo3l9fmahQM5e4dsyZ4Xqs8
 DyyYSGtJJnMJaWmupIZNA4UKDCVtwPoVW8YeuK9rwADVokCux9avogof9O1OoA/E
 Pylo+I4UCM82kbpZSd+UxnCx6B0v8XGtW+d31Q4yZXCkw5nw14chrlaprcqB3UgB
 +7C3xOnDWCi7gyxaTqmD7dLay2DM8KCDlznEvBL733Y/cK3to1fywzEPzp0JQCLX
 BLgmmpW13NF++q5BCoTW6sFjZAhBVbiYZwesMrCi75Y32T8zt4G5l4pkvGkSuGF/
 UQh5aoCxaMIp70VPj/loZ0lh78nwVGTok9zRb0rfztM0X4DbmiPi5MNiHRzRpIeE
 1jjEa/GK1t0TDnXc/MuDFK8cWwdhttIqUL5yWfAxjXbtP27eLtsopQUdW7EPHs7d
 sMnfuSUuhOC28yByVxIkBcwawLyYrcWRphJ3ixCO70CoJWt2DT6aOKxcFJefoJix
 Pto6Oo3oQ4iypMM5M9/0Uo+AK2TKRejWIqtZdbo+ir70tNxVH3WDZq++fG0drXOB
 r2I/GY6nRjuzLOe2jzEqywFTFd2xpk4Qo84LGb1R3U6aU5qS2gA0W/q00JS5c2qU
 R8uReJ7bvmLmrVNZ/NI4
 =y9YG
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - do not generate unneeded top-level built-in.a

 - let git ignore O= directory entirely

 - optimize scripts/kallsyms slightly

 - exclude DWARF info from *.s regardless of config options

 - fix GCC toolchain search path for Clang to prepare ld.lld support

 - do not generate modules.order when CONFIG_MODULES is disabled

 - simplify single target rules and remove VPATH for external module
   build

 - allow to add optional flags to dpkg-buildpackage when building
   deb-pkg

 - move some compiler option tests from Makefile to Kconfig

 - various Makefile cleanups

* tag 'kbuild-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
  kbuild: remove scripts/basic/% build target
  kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
  kbuild: clean up scripts/gcc-version.sh
  kbuild: remove cc-version macro
  kbuild: update comment block of scripts/clang-version.sh
  kbuild: remove commented-out INITRD_COMPRESS
  kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
  kbuild: [bin]deb-pkg: add DPKG_FLAGS variable
  kbuild: move ".config not found!" message from Kconfig to Makefile
  kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
  kbuild: simplify single target rules
  kbuild: remove empty rules for makefiles
  kbuild: make -r/-R effective in top Makefile for old Make versions
  kbuild: move tools_silent to a more relevant place
  kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
  kbuild: refactor cc-cross-prefix implementation
  kbuild: hardcode genksyms path and remove GENKSYMS variable
  scripts/gdb: refactor rules for symlink creation
  kbuild: create symlink to vmlinux-gdb.py in scripts_gdb target
  scripts/gdb: do not descend into scripts/gdb from scripts
  ...
2019-03-10 17:48:21 -07:00
Linus Torvalds e431f2d74e Driver core patches for 5.1-rc1
Here is the big driver core patchset for 5.1-rc1
 
 More patches than "normal" here this merge window, due to some work in
 the driver core by Alexander Duyck to rework the async probe
 functionality to work better for a number of devices, and independant
 work from Rafael for the device link functionality to make it work
 "correctly".
 
 Also in here is:
 	- lots of BUS_ATTR() removals, the macro is about to go away
 	- firmware test fixups
 	- ihex fixups and simplification
 	- component additions (also includes i915 patches)
 	- lots of minor coding style fixups and cleanups.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
 ep8g+6oRLxJy414hogxQ
 =bLs2
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core patchset for 5.1-rc1

  More patches than "normal" here this merge window, due to some work in
  the driver core by Alexander Duyck to rework the async probe
  functionality to work better for a number of devices, and independant
  work from Rafael for the device link functionality to make it work
  "correctly".

  Also in here is:

   - lots of BUS_ATTR() removals, the macro is about to go away

   - firmware test fixups

   - ihex fixups and simplification

   - component additions (also includes i915 patches)

   - lots of minor coding style fixups and cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
  driver core: platform: remove misleading err_alloc label
  platform: set of_node in platform_device_register_full()
  firmware: hardcode the debug message for -ENOENT
  driver core: Add missing description of new struct device_link field
  driver core: Fix PM-runtime for links added during consumer probe
  drivers/component: kerneldoc polish
  async: Add cmdline option to specify drivers to be async probed
  driver core: Fix possible supplier PM-usage counter imbalance
  PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
  driver: platform: Support parsing GpioInt 0 in platform_get_irq()
  selftests: firmware: fix verify_reqs() return value
  Revert "selftests: firmware: remove use of non-standard diff -Z option"
  Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
  device: Fix comment for driver_data in struct device
  kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
  sysfs: remove unused include of kernfs-internal.h
  driver core: Postpone DMA tear-down until after devres release
  driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
  PM-runtime: Take suppliers into account in __pm_runtime_set_status()
  device.h: Add __cold to dev_<level> logging functions
  ...
2019-03-06 14:52:48 -08:00
Masahiro Yamada 9250d20e9e kbuild: remove scripts/basic/% build target
This build rule was introduced by commit cd05e6bdc6 ("[PATCH]
kbuild: fix split-include dependency") to handle the dependency of
scripts/basic/split-include.

Now, fixdep is the only tool in scripts/basic/, and this rule is
no longer used.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-05 02:02:44 +09:00
Luc Van Oostenryck b89f25ea78 kbuild: use -Werror=implicit-... instead of -Werror-implicit-...
The flag '-Werror-implicit-function-declaration', present in GCC 2.95,
stopped to be documented in GCC 4.3, replaced by the more generic
'-Werror=...' form.

So, use the equivalent '-Werror=implicit-function-declaration' instead.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-04 22:39:20 +09:00
Masahiro Yamada 54b598a863 kbuild: remove commented-out INITRD_COMPRESS
This code has been commented out since commit b7000adef1
("Don't set the INITRD_COMPRESS environment variable automatically").

Clean it up now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-04 22:24:02 +09:00
Linus Torvalds 1c163f4c7b Linux 5.0 2019-03-03 15:21:29 -08:00
Masahiro Yamada 9d93744400 kbuild: move -gsplit-dwarf, -gdwarf-4 option tests to Kconfig
CONFIG_DEBUG_INFO_SPLIT and CONFIG_DEBUG_INFO_DWARF4 enable extra
dwarf options if supported. You never know if they are really enabled
since Makefile may silently turn them off.

The actual behavior will match to the kernel configuration by
testing those compiler flags in the Kconfig stage.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-28 22:50:55 +09:00
Masahiro Yamada 058507195b kbuild: move ".config not found!" message from Kconfig to Makefile
If you run "make" in a pristine source tree, currently Kbuild will
start to build Kconfig to let it show the error message.

It would be more straightforward to check it in Makefile and let
it fail immediately.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27 22:25:10 +09:00
Masahiro Yamada 9390dff66a kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing
If include/config/auto.conf.cmd is lost for some reasons, it is not
self-healing, so the top Makefile misses to run syncconfig.
Move include/config/auto.conf.cmd to the target side.

I used a pattern rule instead of a normal rule here although it is
a bit gross.

If the rule were written with a normal rule like this,

  include/config/auto.conf \
  include/config/auto.conf.cmd \
  include/config/tristate.conf: $(KCONFIG_CONFIG)
          $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig

... syncconfig would be executed per target.

Using a pattern rule makes sure that syncconfig is executed just once
because Make assumes the recipe will create all of the targets.

Here is a quote from the GNU Make manual [1]:

"Pattern rules may have more than one target. Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe. If a pattern rule has multiple targets, make knows that
the rule's recipe is responsible for making all of the targets. The
recipe is executed only once to make all the targets. When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: make worries only about giving a recipe and prerequisites
to the file presently in question. However, when this file's recipe is
run, the other targets are marked as having been updated themselves."

[1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27 22:22:12 +09:00
Masahiro Yamada 6b12de69ad kbuild: simplify single target rules
The dependency will be checked anyway after Kbuild descends into a
sub-directory. Skip object/source dependency checks in top Makefile.

VPATH can be simpler since the top Makefile no longer checks the
presence of the source file, which is located in in the external
module directory.

One good thing is, it can compile an object from a generated source
file.

  $ make crypto/rsapubkey.asn1.o
    ...
  ASN.1   crypto/rsapubkey.asn1.c
  CC      crypto/rsapubkey.asn1.o

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27 21:43:31 +09:00
Masahiro Yamada b999923c29 kbuild: remove empty rules for makefiles
The previous commit made 'MAKEFLAGS += -rR' effective in the top
Makefile regardless of O= option, GNU Make versions.

The top Makefile does not need to cancel implicit rules for makefiles.

There is still one place where an empty rule is useful. Since -rR is
effective only after sub-make, GNU Make would try implicit rules to
update the top Makefile. Although it is not a big overhead, cancel it
just in case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27 21:43:31 +09:00
Masahiro Yamada 3812b8c5c5 kbuild: make -r/-R effective in top Makefile for old Make versions
Adding -rR to MAKEFLAGS is important because we do not want to
be bothered by built-in implicit rules or variables.

One problem that used to exist in older GNU Make versions is

  MAKEFLAGS += -rR

... does not become effective in the current Makefile. When you are
building with O= option, it becomes effective in the top Makefile
since it recurses via 'sub-make' target. Otherwise, the top Makefile
tries implicit rules. That is why we explicitly add empty rules for
Makefiles, but we often miss to do that.

In fact, adding -d option to older GNU Make versions shows it is
trying a bunch of implicit pattern rules.

 Considering target file `scripts/Makefile.kcov'.
  Looking for an implicit rule for `scripts/Makefile.kcov'.
  Trying pattern rule with stem `Makefile.kcov'.
  Trying implicit prerequisite `scripts/Makefile.kcov.o'.
  Trying pattern rule with stem `Makefile.kcov'.
  Trying implicit prerequisite `scripts/Makefile.kcov.c'.
  Trying pattern rule with stem `Makefile.kcov'.
  Trying implicit prerequisite `scripts/Makefile.kcov.cc'.
  Trying pattern rule with stem `Makefile.kcov'.
  Trying implicit prerequisite `scripts/Makefile.kcov.C'.
  ...

This issue was fixed by GNU Make commit 58dae243526b ("[Savannah #20501]
Handle adding -r/-R to MAKEFLAGS in the makefile"). So, it is no longer
a problem if you use GNU Make 4.0 or later. However, older versions are
still widely used.

So, I decided to patch the kernel Makefile to invoke sub-make regardless
of O= option. This will allow further cleanups.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27 21:43:31 +09:00
Masahiro Yamada f47a23ce2b kbuild: move tools_silent to a more relevant place
This would disturb the change the sub-make part. Move it near the
tools/ target.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27 21:43:30 +09:00