Commit Graph

10 Commits

Author SHA1 Message Date
Javier Martinez Canillas c5ee1b486f ARM: dts: dm8148: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:

"Node /memory has a reg or ranges property, but no unit name"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-31 07:40:26 -07:00
Javier Martinez Canillas 0b0d912ab5 ARM: dts: da850/dm81x: remove unneeded unit name for fixed regulators
This patch fixes the following DTC warnings for many boards:

"Node /fixedregulator@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-15 09:42:38 -07:00
Nicolas Chauvet 1ddbef4d59 ARM: dts: disable mmc by default and enable when needed for dm814x
This patch disable mmc nodes by default in the dm814x.dtsi and
enable only when needed on a given dts

v2: Disable un-used mmc nodes on the related boards dts files
 instead of from the included SOC dts

Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-05-12 13:37:17 -07:00
Roger Quadros 44a3ab68ca ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and
can't be used for wait state insertion for NAND I/O read/write.
So disable read/write wait monitoring as per Reference Manual's
suggestion [1].

[1] dm814x TRM: SPRUGZ8F: 11.2.4.12.2 NAND Device-Ready Pin

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-01 09:58:09 -08:00
Roger Quadros 0c3e192ad2 ARM: dts: dm814x: dra62x: Fix NAND device nodes
Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.

The GPMC node will provide an interrupt controller for the
NAND IRQs.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-03-01 09:58:09 -08:00
Tony Lindgren 0589df6a9f ARM: dts: Add NAND support for dm8148-evm
Add NAND support for dm8148-evm.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-12 13:25:14 -08:00
Tony Lindgren e032013fb6 ARM: dts: Add usb support for dm814x-evm
Add usb support for dm814x-evm

Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22 16:01:16 -08:00
Tony Lindgren 67b5e9ec96 ARM: dts: Add mmc support for dm8148-evm
There is a mmc slot on the dm8148-evm that's wired to the sd_1
interface.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-22 16:00:51 -08:00
Tony Lindgren 87ee15ec26 ARM: dts: Fix dm814x control base to properly initialize Ethernet PHY
Looks like I made a typo on the control base, all the 81xx
SoCs have it at 0x48140000 base. We've just gotten away with
the typo as the Ethernet phy was configured by the bootloader
on my test system and we're not yet using the pinctrl.

In addition to fixing the contol base, we need to also use the
right Ethernet phy flags to initialize it. And we are still
missing the PLL driver for dm814x and only relying on the
divider and mux clocks.

Fixes: f3d953ea37 ("ARM: dts: Add minimal dm814x support")
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Cc: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-14 12:12:15 -07:00
Tony Lindgren 73db9e0141 ARM: dts: Add minimal dts support for dm8148-evm
Add minimal dts support for dm8148-evm.

Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-23 22:33:18 -07:00