common.c was create to contain code shared across the various Tegra board
files. There is now only one board file, tegra.c. So, move the code there.
One exception is the PMC reboot routine, which moves to pmc.c, and now
takes advantage of the 'standard' tegra_pmc_readl/writel functions.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tegra's board file currently initializes clocks much earlier than those
for most other ARM SoCs. The reason is:
* The PMC HW block is involved in the path of some interrupts (i.e. it
inverts, or not, the IRQ input pin dedicated to the PMIC).
* So, that part of the PMC must be initialized early so that the IRQ
polarity is correct.
* The PMC initialization is currently monolithic, and the PMC has some
clock inputs, so the init routine ends up calling of_clk_get_by_name(),
and hence clocks must be set up early too.
In order to defer clock initialization to the more typical location,
split out the portions of tegra_pmc_init() that are truly IRQ-related
into a separate tegra_pmc_init_irq(), which can be called from the
machine descriptor's .init_irq() function, and defer the rest until
the machine descriptor's .init_machine() function. This allows the
clock initiliazation to happen from the machine descriptor's
.init_time() function, as is typical.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The LP1 suspending mode on Tegra means CPU rail off, devices and PLLs are
clock gated and SDRAM in self-refresh mode. That means the low level LP1
suspending and resuming code couldn't be run on DRAM and the CPU must
switch to the always on clock domain (a.k.a. CLK_M 12MHz oscillator). And
the system clock (SCLK) would be switched to CLK_S, a 32KHz oscillator.
The LP1 low level handling code need to be moved to IRAM area first. And
marking the LP1 mask for indicating the Tegra device is in LP1. The CPU
power timer needs to be re-calculated based on 32KHz that was originally
based on PCLK.
When resuming from LP1, the LP1 reset handler will resume PLLs and then
put DRAM to normal mode. Then jumping to the "tegra_resume" that will
restore full context before back to kernel. The "tegra_resume" handler
was expected to be found in PMC_SCRATCH41 register.
This is common LP1 procedures for Tegra, so we do these jobs mainly in
this patch:
* moving LP1 low level handling code to IRAM
* marking LP1 mask
* copying the physical address of "tegra_resume" to PMC_SCRATCH41
* re-calculate the CPU power timer based on 32KHz
Signed-off-by: Joseph Lo <josephl@nvidia.com>
[swarren, replaced IRAM_CODE macro with IO_ADDRESS(TEGRA_IRAM_CODE_AREA)]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Adding suspend to RAM support for Tegra platform. There are three suspend
mode for Tegra. The difference were below.
* LP2: CPU voltage off
* LP1: CPU voltage off, DRAM in self-refresh
* LP0: CPU + Core voltage off, DRAM in self-refresh
After this patch, the LP2 suspend mode will be supported.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The PMC mostly controls the entry and exit of the system from different
sleep modes. Different platform or system may have different configurations.
The power management configurations of PMC is represented as some properties.
The system needs to define the properties when the system supports deep sleep
mode (i.e. suspend).
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The CPU power timer set up function was related to PMC register. Now moving
it to PMC driver. And it also help to clean up the PM related code later.
The timer was calculated based on the input clock of PMC. In this patch, we
also get the clock from DT.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Adding the power on function for secondary CPUs in PMC driver, this can
help us to remove legacy powergate driver and add generic power domain
support later.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
This PMC driver is enough to parse the nvidia,invert-interrupt property
from device tree, and configure the PMC's to honor that.
In the future, this file could expand to centralize all other PMC accesses
within the mach-tegra code.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Stephen Warren