Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: allmodconfig arm):
drivers/power/supply/ab8500_charger.c: In function ‘ab8500_charger_max_usb_curr’:
drivers/power/supply/ab8500_charger.c:738:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (di->vbus_detected) {
^
drivers/power/supply/ab8500_charger.c:745:2: note: here
case USB_STAT_HM_IDGND:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: footbridge_defconfig arm):
drivers/watchdog/wdt285.c: In function ‘watchdog_ioctl’:
drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
watchdog_ping();
^~~~~~~~~~~~~~~
drivers/watchdog/wdt285.c:172:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: assabet_defconfig arm):
drivers/mtd/maps/sa1100-flash.c: In function ‘sa1100_probe_subdev’:
drivers/mtd/maps/sa1100-flash.c:82:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
printk(KERN_WARNING "SA1100 flash: unknown base address "
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"0x%08lx, assuming CS0\n", phys);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mtd/maps/sa1100-flash.c:85:2: note: here
case SA1100_CS0_PHYS:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: sunxi_defconfig arm):
drivers/gpu/drm/sun4i/sun4i_tcon.c: In function ‘sun4i_tcon0_mode_set_dithering’:
drivers/gpu/drm/sun4i/sun4i_tcon.c:318:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
val |= SUN4I_TCON0_FRM_CTL_MODE_B;
drivers/gpu/drm/sun4i/sun4i_tcon.c:319:2: note: here
case MEDIA_BUS_FMT_RGB666_1X18:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: multi_v7_defconfig arm):
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function ‘sun6i_dsi_transfer’:
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:993:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (msg->rx_len == 1) {
^
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:998:2: note: here
default:
^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: rpc_defconfig arm):
arch/arm/mach-rpc/riscpc.c: In function ‘parse_tag_acorn’:
arch/arm/mach-rpc/riscpc.c:48:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
vram_size += PAGE_SIZE * 256;
~~~~~~~~~~^~~~~~~~~~~~~~~~~~
arch/arm/mach-rpc/riscpc.c:49:2: note: here
case 256:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: powerpc-ppa8548_defconfig powerpc):
drivers/dma/fsldma.c: In function ‘fsl_dma_chan_probe’:
drivers/dma/fsldma.c:1165:26: warning: this statement may fall through [-Wimplicit-fallthrough=]
chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/dma/fsldma.c:1166:2: note: here
case FSL_DMA_IP_83XX:
^~~~
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
The new dma_alloc_contiguous hides if we allocate CMA or regular
pages, and thus fails to retry a ZONE_NORMAL allocation if the CMA
allocation succeeds but isn't addressable. That means we either fail
outright or dip into a small zone that might not succeed either.
Thanks to Hillf Danton for debugging this issue.
Fixes: b1d2dc009d ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers")
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
callchains:
Alexey Budankov:
- Allow collecting LBR together with DWARF callchains, for workloads
where the userspace stack size collected is not big enough for
pure DWARF based unwinding.
- Dump the LBR call stack in 'perf report -D'.
perf top:
Arnaldo Carvalho de Melo:
- Show visual cue at start to state that the minimal set of samples
are being collected prior to sorting/bucketizing/displaying.
CoreSight (ARM hardware tracing):
Leo Yan:
- Support sample flags 'insn' and 'insnlen'.
core:
Adrian Hunter:
- Add comment for 'idx' member in 'struct perf_sample_id.
tools headers:
Arnaldo Carvalho de Melo:
- Synchronize linux/bits.h, which required grabbing a copy of the kernel
const.h headers and some changes in the ordering of header directories.
- Sync x86's asm/cpufeatures.h with the with the kernel, no change in
any of the tools.
libperf:
Jiri Olsa:
- Fix arch include paths.
libtraceevent:
Steven Rostedt (VMware):
- Fix "robust" test of do_generate_dynamic_list_file.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXVxFFAAKCRCyPKLppCJ+
JwebAQCp3nc/q4rpE6v9W8b1uMAsmELl5q8D+74/1ZWT4dqPFAEA9ZmtsIi/7ZjV
Dq3403hFUfk1kDacEvUXKgzi3PMq+Qc=
=DK9x
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.4-20190820' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
callchains:
Alexey Budankov:
- Allow collecting LBR together with DWARF callchains, for workloads
where the userspace stack size collected is not big enough for
pure DWARF based unwinding.
- Dump the LBR call stack in 'perf report -D'.
perf top:
Arnaldo Carvalho de Melo:
- Show visual cue at start to state that the minimal set of samples
are being collected prior to sorting/bucketizing/displaying.
CoreSight (ARM hardware tracing):
Leo Yan:
- Support sample flags 'insn' and 'insnlen'.
core:
Adrian Hunter:
- Add comment for 'idx' member in 'struct perf_sample_id.
tools headers:
Arnaldo Carvalho de Melo:
- Synchronize linux/bits.h, which required grabbing a copy of the kernel
const.h headers and some changes in the ordering of header directories.
- Sync x86's asm/cpufeatures.h with the with the kernel, no change in
any of the tools.
libperf:
Jiri Olsa:
- Fix arch include paths.
libtraceevent:
Steven Rostedt (VMware):
- Fix "robust" test of do_generate_dynamic_list_file.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull HID fixes from Jiri Kosina:
- a few regression fixes for wacom driver (including fix for my earlier
mismerge) from Aaron Armstrong Skomra and Jason Gerecke
- revert of a few Logitech device ID additions which turn out to not
work perfectly with the hidpp driver at the moment; proper support is
now scheduled for 5.4. Fixes from Benjamin Tissoires
- scheduling-in-atomic fix for cp2112 driver, from Benjamin Tissoires
- new device ID to intel-ish, from Even Xu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: correct misreported EKR ring values
HID: cp2112: prevent sleeping function called from invalid context
HID: intel-ish-hid: ipc: add EHL device id
HID: wacom: Correct distance scale for 2nd-gen Intuos devices
HID: logitech-hidpp: remove support for the G700 over USB
Revert "HID: logitech-hidpp: add USB PID for a few more supported mice"
HID: wacom: add back changes dropped in merge commit
In fault_opcodes_write(), 'data' is allocated through kcalloc(). However,
it is not deallocated in the following execution if an error occurs,
leading to memory leaks. To fix this issue, introduce the 'free_data' label
to free 'data' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/1566154486-3713-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In fault_opcodes_read(), 'data' is not deallocated if debugfs_file_get()
fails, leading to a memory leak. To fix this bug, introduce the 'free_data'
label to free 'data' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/1566156571-4335-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In mlx4_ib_alloc_pv_bufs(), 'tun_qp->tx_ring' is allocated through
kcalloc(). However, it is not always deallocated in the following execution
if an error occurs, leading to memory leaks. To fix this issue, free
'tun_qp->tx_ring' whenever an error occurs.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/1566159781-4642-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Doug Ledford <dledford@redhat.com>
In cma_init, if cma_configfs_init fails, need to free the
previously memory and return fail, otherwise will trigger
null-ptr-deref Read in cma_cleanup.
cma_cleanup
cma_configfs_exit
configfs_unregister_subsystem
Fixes: 045959db65 ("IB/cma: Add configfs for rdma_cm")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Link: https://lore.kernel.org/r/1566188859-103051-1-git-send-email-zhengbin13@huawei.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check conditions that are mandatory to post_send UMR WQEs.
1. Modifying page size.
2. Modifying remote atomic permissions if atomic access is required.
If either condition is not fulfilled then fail to post_send() flow.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-9-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
The UMR WQE in the MR re-registration flow requires that
modify_atomic and modify_entity_size capabilities are enabled.
Therefore, check that the these capabilities are present before going to
umr flow and go through slow path if not.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-8-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
ODP depends on the several device capabilities, among them is the ability
to send UMR WQEs with that modify atomic and entity size of the MR.
Therefore, only if all conditions to send such a UMR WQE are met then
driver can report that ODP is supported. Use this check of conditions
in all places where driver needs to know about ODP support.
Also, implicit ODP support depends on ability of driver to send UMR WQEs
for an indirect mkey. Therefore, verify that all conditions to do so are
met when reporting support.
Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Introduce helper function to unify various use_umr checks.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-6-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
task_active_pid_ns() is wrong API to check PID namespace because it
posses some restrictions and return PID namespace where the process
was allocated. It created mismatches with current namespace, which
can be different.
Rewrite whole rdma_is_visible_in_pid_ns() logic to provide reliable
results without any relation to allocated PID namespace.
Fixes: 8be565e65f ("RDMA/nldev: Factor out the PID namespace check")
Fixes: 6a6c306a09 ("RDMA/restrack: Make is_visible_in_pid_ns() as an API")
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
"Auto" configuration mode is called for visible in that PID
namespace and it ensures that all counters and QPs are coexist
in the same namespace and belong to same PID.
Fixes: 99fa331dc8 ("RDMA/counter: Add "auto" configuration mode support")
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order. A stale TID RDMA data packet
could lead to TidErr if the TID entries have been released by duplicate
data packets generated from retries, and subsequently erroneously force
the qp into error state in the current implementation.
Since the payload has already been dropped by hardware, the packet can
be simply dropped and it is no longer necessary to put the qp into
error state.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192058.105923.72324.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order, which could cause incorrect
processing of stale packets. For stale TID RDMA WRITE DATA packets that
cause KDETH EFLAGS errors, this patch adds additional checks before
processing the packets.
Fixes: d72fe7d500 ("IB/hfi1: Add a function to receive TID RDMA WRITE DATA packet")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192051.105923.69979.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
packets could be delivered out of order, which could cause incorrect
processing of stale packets. For stale TID RDMA READ RESP packets that
cause KDETH EFLAGS errors, this patch adds additional checks before
processing the packets.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192045.105923.59813.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When processing a TID RDMA READ RESP packet that causes KDETH EFLAGS
errors, the packet's IB PSN is checked against qp->s_last_psn and
qp->s_psn without the protection of qp->s_lock, which is not safe.
This patch fixes the issue by acquiring qp->s_lock first.
Fixes: 9905bf06e8 ("IB/hfi1: Add functions to receive TID RDMA READ response")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192039.105923.7852.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a congested fabric with adaptive routing enabled, traces show that
the sender could receive stale TID RDMA NAK packets that contain newer
KDETH PSNs and older Verbs PSNs. If not dropped, these packets could
cause the incorrect rewinding of the software flows and the incorrect
completion of TID RDMA WRITE requests, and eventually leading to memory
corruption and kernel crash.
The current code drops stale TID RDMA ACK/NAK packets solely based
on KDETH PSNs, which may lead to erroneous processing. This patch
fixes the issue by also checking the Verbs PSN. Addition checks are
added before rewinding the TID RDMA WRITE DATA packets.
Fixes: 9e93e967f7 ("IB/hfi1: Add a function to receive TID RDMA ACK packet")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20190815192033.105923.44192.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
In siw_connect() we have an error flow where there is no valid qp
pointer. Make sure we don't try to de-ref in that situation.
Fixes: 6c52fdc244 ("rdma/siw: connection management")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190819140257.19319-1-bmt@zurich.ibm.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
When ODP is enabled with IB_ACCESS_HUGETLB then the required pages
should be calculated based on the extent of the MR, which is rounded
to the nearest huge page alignment.
Fixes: d2183c6f19 ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-5-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
We need to check if we have CQEs pending before starting a poll loop,
as those could be the events we will be spinning for (and hence we'll
find none). This can happen if a CQE triggers an error, or if it is
found by eg an IRQ before we get a chance to find it through polling.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One of the components in LiteON CL1 device has limitations that
can be encountered based upon boundary race conditions using the
nvme bus specific suspend to idle flow.
When this situation occurs the drive doesn't resume properly from
suspend-to-idle.
LiteON has confirmed this problem and fixed in the next firmware
version. As this firmware is already in the field, avoid running
nvme specific suspend to idle flow.
Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Charles Hyde <charles.hyde@dellteam.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
introduced a validation for controllers with duplicate cntlid that runs
on nvme_init_subsystem(). The problem is that the validation relies on
ctrl->cntlid, and this value is assigned (from id_ctrl value) after the
call for nvme_init_subsystem() in nvme_init_identify() for non-fabrics
scenario. That leads to ctrl->cntlid always being 0 in case we have a
physical set of controllers in the same subsystem.
This patch fixes that by loading the discovered cntlid id_ctrl value into
ctrl->cntlid before the subsystem initialization, only for the non-fabrics
case. The patch was tested with emulated nvme devices (qemu) having two
controllers in a single subsystem. Without the patch, we couldn't make
it work failing in the duplicate check; when running with the patch, we
could see the subsystem holding both controllers.
For the fabrics case we see ctrl->cntlid has a more intricate relation
with the admin connect, so we didn't change that.
Fixes: 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_state_set_live() making a path available triggers requeue_work
in order to resubmit requests that ended up on requeue_list when no
paths were available.
This requeue_work may race with concurrent nvme_ns_head_make_request()
that do not observe the live path yet.
Such concurrent requests may by made by either:
- New IO submission.
- Requeue_work triggered by nvme_failover_req() or another ana_work.
A race may cause requeue_work capture the state of requeue_list before
more requests get onto the list. These requests will stay on the list
forever unless requeue_work is triggered again.
In order to prevent such race, nvme_state_set_live() should
synchronize_srcu(&head->srcu) before triggering the requeue_work and
prevent nvme_ns_head_make_request referencing an old snapshot of the
path list.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a request issue ends up being punted to async context to avoid
blocking, we can get into a situation where the original application
enters the poll loop for that very request before it has been issued.
This should not be an issue, except that the polling will hold the
io_uring uring_ctx mutex for the duration of the poll. When the async
worker has actually issued the request, it needs to acquire this mutex
to add the request to the poll issued list. Since the application
polling is already holding this mutex, the workqueue sleeps on the
mutex forever, and the application thus never gets a chance to poll for
the very request it was interested in.
Fix this by ensuring that the polling drops the uring_ctx occasionally
if it's not making any progress.
Reported-by: Jeffrey M. Birnbaum <jmbnyc@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the case of X86_PAE, unsigned long is u32, but the physical address type
should be u64. Due to the bug here, the netvsc driver can not load
successfully, and sometimes the VM can panic due to memory corruption (the
hypervisor writes data to the wrong location).
Fixes: 6ba34171bc ("Drivers: hv: vmbus: Remove use of slow_virt_to_phys()")
Cc: stable@vger.kernel.org
Cc: Michael Kelley <mikelley@microsoft.com>
Reported-and-tested-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When building hv_kvp_daemon GCC-8.3 complains:
hv_kvp_daemon.c: In function ‘kvp_get_ip_info.constprop’:
hv_kvp_daemon.c:812:30: warning: ‘ip_buffer’ may be used uninitialized in this function [-Wmaybe-uninitialized]
struct hv_kvp_ipaddr_value *ip_buffer;
this seems to be a false positive: we only use ip_buffer when
op == KVP_OP_GET_IP_INFO and it is only unset when op == KVP_OP_ENUMERATE.
Silence the warning by initializing ip_buffer to NULL.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck reported problem with compilation when the ARCH is
specified:
$ make ARCH=x86_64
In file included from tools/include/asm/atomic.h:6:0,
from include/linux/atomic.h:5,
from tools/include/linux/refcount.h:41,
from cpumap.c:4: tools/include/asm/../../arch/x86/include/asm/atomic.h:11:10:
fatal error: asm/cmpxchg.h: No such file or directory
The problem is that we don't use SRCARCH (the sanitized ARCH version)
and we don't get the proper include path.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 3143504918 ("libperf: Make libperf.a part of the perf build")
Link: http://lkml.kernel.org/r/20190820124624.GG24105@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Simplify the ring buffer handling with the in-place API.
Also avoid the dynamic allocation and the memory leak in the channel
callback function.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This field is no longer used after the commit
63ed4e0c67 ("Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code")
, because it's replaced by the global variable
"struct ms_hyperv_tsc_page *tsc_pg;" (now, the variable is in
drivers/clocksource/hyperv_timer.c).
Fixes: 63ed4e0c67 ("Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
We were getting the file by luck, from one of the paths in -I, fix it to
get it from the proper place:
$ cd tools/include/uapi/asm/
[acme@quaco asm]$ grep include bitsperlong.h
#include "../../arch/x86/include/uapi/asm/bitsperlong.h"
#include "../../arch/arm64/include/uapi/asm/bitsperlong.h"
#include "../../arch/powerpc/include/uapi/asm/bitsperlong.h"
#include "../../arch/s390/include/uapi/asm/bitsperlong.h"
#include "../../arch/sparc/include/uapi/asm/bitsperlong.h"
#include "../../arch/mips/include/uapi/asm/bitsperlong.h"
#include "../../arch/ia64/include/uapi/asm/bitsperlong.h"
#include "../../arch/riscv/include/uapi/asm/bitsperlong.h"
#include "../../arch/alpha/include/uapi/asm/bitsperlong.h"
#include <asm-generic/bitsperlong.h>
$ ls -la ../../arch/x86/include/uapi/asm/bitsperlong.h
ls: cannot access '../../arch/x86/include/uapi/asm/bitsperlong.h': No such file or directory
$ ls -la ../../../arch/*/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 237 ../../../arch/alpha/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 841 ../../../arch/arm64/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 966 ../../../arch/hexagon/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 234 ../../../arch/ia64/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 100 ../../../arch/microblaze/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 244 ../../../arch/mips/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 352 ../../../arch/parisc/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 312 ../../../arch/powerpc/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 353 ../../../arch/riscv/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 292 ../../../arch/s390/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 323 ../../../arch/sparc/include/uapi/asm/bitsperlong.h
-rw-rw-r--. 1 320 ../../../arch/x86/include/uapi/asm/bitsperlong.h
$
Found while fixing some other problem, before it was escaping the
tools/ chroot and using stuff in the kernel sources:
CC /tmp/build/perf/util/find_bit.o
In file included from /git/linux/tools/include/../../arch/x86/include/uapi/asm/bitsperlong.h:11,
from /git/linux/tools/include/uapi/asm/bitsperlong.h:3,
from /git/linux/tools/include/linux/bits.h:6,
from /git/linux/tools/include/linux/bitops.h:13,
from ../lib/find_bit.c:17:
# cd /git/linux/tools/include/../../arch/x86/include/uapi/asm/
# pwd
/git/linux/arch/x86/include/uapi/asm
#
Now it is getting the one we want it to, i.e. the one inside tools/:
CC /tmp/build/perf/util/find_bit.o
In file included from /git/linux/tools/arch/x86/include/uapi/asm/bitsperlong.h:11,
from /git/linux/tools/include/linux/bits.h:6,
from /git/linux/tools/include/linux/bitops.h:13,
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8f8cfqywmf6jk8a3ucr0ixhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Give visual cue about what is happening while initially collecting the
minimal set of samples to collect/sort/display.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xcui60p1v6ozijfam2o89ya8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf top' tool will use that to avoid having a initial blank screen
while collecting the minimum number of samples to sort and display.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-89ciceg8cy4442he3t0jzo3f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we want just to print a message on the center of the screen,
like in 'perf top' while we wait for the minimum amount of samples to be
collected before sorting and showing them.
Also expose __ui__info_window() as an optimization for cases where such
message is to be printed while holding the ui lock.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uat0f89vfwl2w52kv9wzwd8a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will not need it when refactoring this function to be
non-interactive, so make it optional.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pnx1dn17bsz7lqt9ty95nnjx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tools/lib/traceevent/Makefile had a test added to it to detect a failure
of the "nm" when making the dynamic list file (whatever that is). The
problem is that the test sorts the values "U W w" and some versions of sort
will place "w" ahead of "W" (even though it has a higher ASCII value, and
break the test.
Add 'tr "w" "W"' to merge the two and not worry about the ordering.
Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal rarek <mmarek@suse.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 6467753d61 ("tools lib traceevent: Robustify do_generate_dynamic_list_file")
Link: http://lkml.kernel.org/r/20190805130150.25acfeb1@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'idx' member was added as preparation for AUX area sampling. Add a
comment to describe why.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/83ff264f-84c3-5372-8976-dd9293d20c6f@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gustavo A. R. Silva