The message got changed a lot time ago.
This was responsible for 36 test case failures on sparc64.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For flow offload adds, if the rhash insert code fails, the flow will still
have been offloaded but the reference to it in the driver freed.
Re-order the offload setup calls to ensure that a flow will only be written
to FW if a kernel reference is held and stored in the rhashtable. Remove
this hashtable entry if the offload fails.
Fixes: c01d0efa51 ("nfp: flower: use rhashtable for flow caching")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling nfp_compile_flow_metadata both assigns a stats context and
increments a ref counter on (or allocates) a mask id table entry. These
are released by the nfp_modify_flow_metadata call on flow deletion,
however, if a flow add fails after metadata is set then the flow entry
will be deleted but the metadata assignments leaked.
Add an error path to the flow add offload function to ensure allocated
metadata is released in the event of an offload fail.
Fixes: 81f3ddf254 ("nfp: add control message passing capabilities to flower offloads")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously when unbinding a slave the 802.3ad implementation only told
partner that the port is not suitable for aggregation by setting the port
aggregation state from aggregatable to individual. This is not enough. If the
physical layer still stays up and we only unbinded this port from the bond there
is nothing in the aggregation status alone to prevent the partner from sending
traffic towards us. To ensure that the partner doesn't consider this
port at all anymore we should also disable collecting and distributing to
signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to
ensure partner exits collecting + distributing state.
I have tested this behaviour againts Arista EOS switches with mlx5 cards
(physical link stays up even when interface is down) and simulated
the same situation virtually Linux <-> Linux with two network namespaces
running two veth device pairs. In both cases setting aggregation to
individual doesn't alone prevent traffic from being to sent towards this
port given that the link stays up in partners end. Partner still keeps
it's end in collecting + distributing state and continues until timeout is
reached. In most cases this means we are losing the traffic partner sends
towards our port while we wait for timeout. This is most visible with slow
periodic time (LACP rate slow).
Other open source implementations like Open VSwitch and libreswitch, and
vendor implementations like Arista EOS, seem to disable collecting +
distributing to when doing similar port disabling/detaching/removing change.
With this patch kernel implementation would behave the same way and ensure
partner doesn't consider our actor viable anymore.
Signed-off-by: Toni Peltonen <peltzi@peltzi.fi>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last set of csum offload fixes had a leak:
Checksum enabled status bits from rx descriptor were incorrectly
interpreted. Consequently all the other valid logic worked on zero bits.
That caused rx checksum offloads never to trigger.
Tested by dumping rx descriptors and validating resulting csum_level.
Reported-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Fixes: ad703c2b91 ("net: aquantia: invalid checksumm offload implementation")
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in a net_warn_ratelimited message, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in the oct_stats_strings array, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting up and tearing down debugfs is current unbalanced, as seen by
this error during resume from suspend:
[ 752.134067] dwc-eth-dwmac 2490000.ethernet eth0: ERROR failed to create debugfs directory
[ 752.134347] dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: failed debugFS registration
The imbalance happens because the driver creates the debugfs hierarchy
when the device is opened and tears it down when the device is closed.
There's little gain in that, and it could be argued that it is even
surprising because it's not usually done for other devices. Fix the
imbalance by moving the debugfs creation and teardown to the driver's
->probe() and ->remove() implementations instead.
Note that the ring descriptors cannot be read while the interface is
down, so make sure to return an empty file when the descriptors_status
debugfs file is read.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_assoc_update_frag_point() should be called whenever asoc->pathmtu
changes, but we missed one place in sctp_association_init(). It would
cause frag_point is zero when sending data.
As says in Jakub's reproducer, if sp->pathmtu is set by socketopt, the
new asoc->pathmtu inherits it in sctp_association_init(). Later when
transports are added and their pmtu >= asoc->pathmtu, it will never
call sctp_assoc_update_frag_point() to set frag_point.
This patch is to fix it by updating frag_point after asoc->pathmtu is
set as sp->pathmtu in sctp_association_init(). Note that it moved them
after sctp_stream_init(), as stream->si needs to be set first.
Frag_point's calculation is also related with datachunk's type, so it
needs to update frag_point when stream->si may be changed in
sctp_process_init().
v1->v2:
- call sctp_assoc_update_frag_point() separately in sctp_process_init
and sctp_association_init, per Marcelo's suggestion.
Fixes: 2f5e3c9df6 ("sctp: introduce sctp_assoc_update_frag_point")
Reported-by: Jakub Audykowicz <jakub.audykowicz@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a few small char/misc driver fixes for 4.20-rc5 that resolve a
number of reported issues.
The "largest" here is the thunderbolt patch, which resolves an issue
with NVM upgrade, the smallest being some fsi driver fixes. There's
also a hyperv bugfix, and the usual binder bugfixes.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXAFbOg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn0wwCbB8w2/v6N0jMtEKk6teuai4ShRgMAnjz/Wau6
wKvvPMG3naIZ/2+2I6qy
=Bcyr
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a few small char/misc driver fixes for 4.20-rc5 that resolve
a number of reported issues.
The "largest" here is the thunderbolt patch, which resolves an issue
with NVM upgrade, the smallest being some fsi driver fixes. There's
also a hyperv bugfix, and the usual binder bugfixes.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: mic/scif: fix copy-paste error in scif_create_remote_lookup
thunderbolt: Prevent root port runtime suspend during NVM upgrade
Drivers: hv: vmbus: check the creation_status in vmbus_establish_gpadl()
binder: fix race that allows malicious free of live buffer
fsi: fsi-scom.c: Remove duplicate header
fsi: master-ast-cf: select GENERIC_ALLOCATOR
Here is a single driver core fix for 4.20-rc5
It resolves an issue with the data alignment in 'struct devres' for the
ARC platform. The full details are in the commit changelog, but the
short summary is the change is a single line:
- unsigned long long data[]; /* guarantee ull alignment */
+ u8 __aligned(ARCH_KMALLOC_MINALIGN) data[];
This has been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXAFd+Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yljmACcCCkLhuIUQmG1BZ+TXNachkljqYkAn3F+n4BM
S3rfNCz7Jc5kqQny+MNQ
=/JwU
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for 4.20-rc5
It resolves an issue with the data alignment in 'struct devres' for
the ARC platform. The full details are in the commit changelog, but
the short summary is the change is a single line:
- unsigned long long data[]; /* guarantee ull alignment */
+ u8 __aligned(ARCH_KMALLOC_MINALIGN) data[];
This has been in linux-next for a while with no reported issues"
* tag 'driver-core-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
devres: Align data[] to ARCH_KMALLOC_MINALIGN
Here are some small IIO and Staging driver fixes for 4.20-rc5.
Nothing major, the IIO fix ended up touching the HID drivers at the same
time, but the HID maintainer acked it. The staging fixes are all minor
patches for reported issues and regressions, full details are in the
shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXAFeeA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZSQCgm8wafCzK2b9YjeUmAxFJQCKkK7YAnjHSqa8N
FwSpP/zei0mtZgw6Rzj9
=cBhw
-----END PGP SIGNATURE-----
Merge tag 'staging-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for 4.20-rc5.
Nothing major, the IIO fix ended up touching the HID drivers at the
same time, but the HID maintainer acked it. The staging fixes are all
minor patches for reported issues and regressions, full details are in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
staging: vchiq_arm: fix compat VCHIQ_IOC_AWAIT_COMPLETION
staging: mt7621-pinctrl: fix uninitialized variable ngroups
staging: rtl8723bs: Add missing return for cfg80211_rtw_get_station
staging: most: use format specifier "%s" in snprintf
staging: rtl8723bs: Fix incorrect sense of ether_addr_equal
staging: mt7621-dma: fix potentially dereferencing uninitialized 'tx_desc'
staging: comedi: clarify/unify macros for NI macro-defined terminals
drivers: staging: cedrus: find ctx before dereferencing it ctx
staging: rtl8723bs: Fix the return value in case of error in 'rtw_wx_read32()'
staging: comedi: ni_mio_common: scale ao INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS
iio:st_magn: Fix enable device after trigger
Here are some small USB and PHY driver fixes for 4.20-rc5
Nothing big at all, just the usual handful of USB fixes for reported
issues, along with some gadget and PHY driver bug fixes.
All of these have been in linux-next with no reported issues.
Note, the USB gadget fixes were in linux-next on its own branch, not in
mine, it just got merged into here yesterday and missed linux-next of
today.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXAFfLg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn4OwCg1rMrW+r4+OeehFi2wR7wxxP0f1QAnRj/djtD
w3+dT6m3PanQE40d1zi5
=HsrT
-----END PGP SIGNATURE-----
Merge tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY driver fixes from Greg KH:
"Here are some small USB and PHY driver fixes for 4.20-rc5
Nothing big at all, just the usual handful of USB fixes for reported
issues, along with some gadget and PHY driver bug fixes.
All of these have been in linux-next with no reported issues. Note,
the USB gadget fixes were in linux-next on its own branch, not in
mine, it just got merged into here yesterday and missed linux-next of
today"
* tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: u_ether: fix unsafe list iteration
USB: omap_udc: fix rejection of out transfers when DMA is used
USB: omap_udc: fix USB gadget functionality on Palm Tungsten E
USB: omap_udc: fix omap_udc_start() on 15xx machines
USB: omap_udc: fix crashes on probe error and module removal
USB: omap_udc: use devm_request_irq()
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
USB: usb-storage: Add new IDs to ums-realtek
Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"
phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845
phy: qcom-qusb2: Use HSTX_TRIM fused value as is
dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits
phy: uniphier-pcie: Depend on HAS_IOMEM
New versions of gcc reasonably warn about the odd pattern of
strncpy(p, q, strlen(q));
which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.
Apparently there was a patch for this floating around earlier, but it
got lost.
Acked-again-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Reomve non-existing EEPROM device from imx51-zii-rdu1 board.
It was added by mistake.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcAVNxAAoJEFBXWFqHsHzO0SYH/06mGVqrvAdCYYMamrcLPkom
7aVizSIcK6O+9ddxhA5pDSHMIKu0Wjn6d1acySeql6AWg0d9pECydoI7Rgfj/fDC
mw/aXlv9TJv+4R6/2MI/CEO2Xfi0c2d0nCzTAmsL3CKp92hIVqPTxc7mW5K9J8bx
W2wbj1wueCn/cLiynDV25krxq4BRbsU8g0Ke+HiuO89W9Qb87qgPyJjWeecyH/dl
/llXuiFzZqHYpmzdYacnKvKResVCCc8Ev4VgEF89M1M9tgOojQOakFfMBfTDEIHG
iooQLc6WLdYjsqDhmnUEbonZ+pHBbNPUvV0iHmR/9y0SyVZdrGgNWjVRSkKuT6I=
=OlmI
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.20, round 2:
- Reomve non-existing EEPROM device from imx51-zii-rdu1 board.
It was added by mistake.
* tag 'imx-fixes-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx51-zii-rdu1: Remove EEPROM node
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch removes the linux-soc mailing list from the Qualcomm SoC
entry. We use the linux-msm and there is no need to have the second
one and this clears the list for use by others.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This set of fixes contains minor regression fixes for LogicPD dts files
for MMC pinctrl and interrupts. There is also one section annotation fix
that shows up with Clang, and a fix for an unitialized field for omap1.
-----BEGIN PGP SIGNATURE-----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=EaEX
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.20/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Few minor fixes for omaps for v4.20-rc cycle
This set of fixes contains minor regression fixes for LogicPD dts files
for MMC pinctrl and interrupts. There is also one section annotation fix
that shows up with Clang, and a fix for an unitialized field for omap1.
* tag 'omap-for-v4.20/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: ams-delta: Fix possible use of uninitialized field
ARM: dts: am3517-som: Fix WL127x Wifi interrupt
ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1
ARM: dts: LogicPD Torpedo: Fix mmc3_dat1 interrupt
ARM: dts: am3517: Fix pinmuxing for CD on MMC1
ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup
Signed-off-by: Olof Johansson <olof@lixom.net>
This set of changes is needed to fix the broken GPIO support
for DaVinci boards in legacy mode after certain changes made to the
GPIO driver in 4.19, namely: commits 587f7a694f ("gpio: davinci: Use
dev name for label and automatic base selection") and eb3744a2dd
("gpio: davinci: Do not assume continuous IRQ numbering").
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tCLo
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
DaVinci: fix GPIO breakage after v4.19
This set of changes is needed to fix the broken GPIO support
for DaVinci boards in legacy mode after certain changes made to the
GPIO driver in 4.19, namely: commits 587f7a694f ("gpio: davinci: Use
dev name for label and automatic base selection") and eb3744a2dd
("gpio: davinci: Do not assume continuous IRQ numbering").
* tag 'davinci-fixes-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: dm644x: set the GPIO base to 0
ARM: davinci: da830: set the GPIO base to 0
ARM: davinci: dm355: set the GPIO base to 0
ARM: davinci: dm646x: set the GPIO base to 0
ARM: davinci: dm365: set the GPIO base to 0
ARM: davinci: da850: set the GPIO base to 0
gpio: davinci: restore a way to manually specify the GPIO base
ARM: davinci: dm644x: define gpio interrupts as separate resources
ARM: davinci: dm355: define gpio interrupts as separate resources
ARM: davinci: dm646x: define gpio interrupts as separate resources
ARM: davinci: dm365: define gpio interrupts as separate resources
ARM: davinci: da8xx: define gpio interrupts as separate resources
Signed-off-by: Olof Johansson <olof@lixom.net>
and fixup of the pcie reset polarity on puma-haikou.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlv2k2IQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgUp6CACrEQqPl2y2xqrQ/7CXNXQRVNEDqDdLkekq
4nHTclyW8IsH1TFv/v4ihn35BYwlmE+SK0+eAkuV5AQ5//yLRz1tFCQI4tPcwtdM
11amUnpmctTt4e2Gv5ryZy2cIUIQjaoolPN5bqmVdNSTe08s2aLmAogXRr0k32m5
tkvZECKTe5C5C6oZ47DcSOkm1bTk3tdf+pMKjGEFsPaIYbeunjLmjdJ1ft9vU927
yLag4S+iT8/klQDCt1CB5b98eS8jTZBZV0rEJBd/lqhXxvZoHDC/EkHZtYNsup4Q
nTMXt12b+o5PPnpi/5p8gl5MJVbAZBhSdKe94akcp36LdhZUhJfW
=D6/c
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Removal of vdd_log regulator on rk960 to fix a stability issue
and fixup of the pcie reset polarity on puma-haikou.
* tag 'v4.20-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
arm64: dts: rockchip: remove vdd_log from rock960 to fix a stability issues
Signed-off-by: Olof Johansson <olof@lixom.net>
firmware on these devices as issues identifying the formally correct
node.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlv2krMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgenqB/4z/gAlUZ8xo9au7cHLXOKmg7WkhqRkWHsr
F1rib1I8wv2d6X+PkQv6QiejaJcp+Tj4unx6IGx904PADlCRj38uo+7jEgirf3h+
MGUcZM9+A1V1IvN31eaSTax9KO/XUaABxCBiDSH91YM6JZHRTh1oskjC1lt2pmfF
yygoVfX0jA6GC9+S1YpKAmMyY37ZFIyiZFak5qVPzDDIHKqRLgFDDc2gGTlsqTca
glxbHapRHXg624wUcuGgnRmhhrzNPFzrQ89/LAZX9MBAwC8p2SekhzE7VR2nAvvZ
9Asl7SU2lOjYTpWP/b8jONpPIPvDSXKnfYxQSYDD+Eud+kUk+rqU
=wPsf
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Moving the veyron memory node from memory@0 back to memory, as the
firmware on these devices as issues identifying the formally correct
node.
* tag 'v4.20-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Remove @0 from the veyron memory node
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- MCE related boot crash fix on certain AMD systems
- FPU exception handling fix
- FPU handling race fix
- revert+rewrite of the RSDP boot protocol extension, use boot_params
instead
- documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/MCE/AMD: Fix the thresholding machinery initialization order
x86/fpu: Use the correct exception table macro in the XSTATE_OP wrapper
x86/fpu: Disable bottom halves while loading FPU registers
x86/acpi, x86/boot: Take RSDP address from boot params if available
x86/boot: Mostly revert commit ae7e1238e6 ("Add ACPI RSDP address to setup_header")
x86/ptrace: Fix documentation for tracehook_report_syscall_entry()
Pull EFI fix from Ingo Molnar:
"An arm64 warning fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Prevent GICv3 WARN() by mapping the memreserve table before first use
Some ARC CPU's do not support unaligned loads/stores. Currently, generic
implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC.
This can lead to misfunction of some drivers as generic functions do a
plain dereference of a pointer that can be unaligned.
Let's use {get/put}_unaligned() helpers instead of plain dereference of
pointer in order to fix. The helpers allow to get and store data from an
unaligned address whilst preserving the CPU internal alignment.
According to [1], the use of these helpers are costly in terms of
performance so we added an initial check for a buffer already aligned so
that the usage of the helpers can be avoided, when possible.
[1] Documentation/unaligned-memory-access.txt
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Tested-by: Vitor Soares <soares@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Change the default defconfig (used with 'make defconfig') to the ARCv2
nsim_hs_defconfig, and also switch the default Kconfig ISA selection to
ARCv2.
This allows several default defconfigs (e.g. make defconfig, make
allnoconfig, make tinyconfig) to all work with ARCv2 by default.
Note since we change default architecture from ARCompact to ARCv2
it's required to explicitly mention architecture type in ARCompact
defconfigs otherwise ARCv2 will be implied and binaries will be
generated for ARCv2.
Cc: <stable@vger.kernel.org> # 4.4.x
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Pull vfs fixes from Al Viro:
"Assorted fixes all over the place.
The iov_iter one is this cycle regression (splice from UDP triggering
WARN_ON()), the rest is older"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: Use d_instantiate() rather than d_add() and don't d_drop()
afs: Fix missing net error handling
afs: Fix validation/callback interaction
iov_iter: teach csum_and_copy_to_iter() to handle pipe-backed ones
exportfs: do not read dentry after free
exportfs: fix 'passing zero to ERR_PTR()' warning
aio: fix failure to put the file pointer
sysv: return 'err' instead of 0 in __sysv_write_inode
- Change idx variable in DO_TRACE macro to __idx to avoid name conflicts.
A kvm event had "idx" as a parameter and it confused the macro.
- Fix a race where interrupts would be traced when set_graph_function was set.
The previous patch set increased a race window that tricked the function graph
tracer to think it should trace interrupts when it really should not have.
The bug has been there before, but was seldom hit. Only the last patch series
made it more common.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXACrFhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgUuAP9zZ0+PjDIXrkZATogEsMJ1OZKy5AiK
mwT7S85/ouOeCQEAi5JUcSfwB0caq2nYB1GKOKNfDH0ffeVR4wNykcYjngM=
=gjwC
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing fixes from Steven Rostedt:
"Two more fixes:
- Change idx variable in DO_TRACE macro to __idx to avoid name
conflicts. A kvm event had "idx" as a parameter and it confused the
macro.
- Fix a race where interrupts would be traced when set_graph_function
was set. The previous patch set increased a race window that
tricked the function graph tracer to think it should trace
interrupts when it really should not have.
The bug has been there before, but was seldom hit. Only the last
patch series made it more common"
* tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/fgraph: Fix set_graph_function from showing interrupts
tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique
was introduced by a patch that tried to fix one bug, but by doing so created
another bug. As both bugs corrupt the output (but they do not crash the
kernel), I decided to fix the design such that it could have both bugs
fixed. The original fix, fixed time reporting of the function graph tracer
when doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt the time
keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the other
use case was the graph call depth. Although, the two may be closely
related, where they got updated was the issue that lead to the two different
bugs that required the two use cases to be updated differently.
The big issue with this fix is that it requires changing each architecture.
The good news is, I was able to remove a lot of code that was duplicated
within the architectures and place it into a single location. Then I could
make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and before
doing so, I cross compiled all the affected architectures to make sure that
they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW/4NPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWAAQCyUIRLgYImr81eTl52lxNRsULk+aiI
U29kRFWWU0c40AEA1X9sDF0MgOItbRGfZtnHTZEousXRDaDf4Fge2kF7Egg=
=liQ0
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While rewriting the function graph tracer, I discovered a design flaw
that was introduced by a patch that tried to fix one bug, but by doing
so created another bug.
As both bugs corrupt the output (but they do not crash the kernel), I
decided to fix the design such that it could have both bugs fixed. The
original fix, fixed time reporting of the function graph tracer when
doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt
the time keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the
other use case was the graph call depth. Although, the two may be
closely related, where they got updated was the issue that lead to the
two different bugs that required the two use cases to be updated
differently.
The big issue with this fix is that it requires changing each
architecture. The good news is, I was able to remove a lot of code
that was duplicated within the architectures and place it into a
single location. Then I could make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and
before doing so, I cross compiled all the affected architectures to
make sure that they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct"
* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sched, trace: Fix prev_state output in sched_switch tracepoint
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Reverse the order of pushing the ret_stack and the callback
function_graph: Move return callback before update of curr_ret_stack
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Make ftrace_push_return_trace() static
sparc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
ARM: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
function_graph: Create function_graph_enter() to consolidate architecture code
Running the Clang static analyzer on IORT code detected the following
error:
Logic error: Branch condition evaluates to a garbage value
in
iort_get_platform_device_domain()
If the named component associated with a given device has no IORT
mappings, iort_get_platform_device_domain() exits its MSI mapping loop
with msi_parent pointer containing garbage, which can lead to erroneous
code path execution.
Initialize the msi_parent pointer, fixing the bug.
Fixes: d4f54a1866 ("ACPI: platform: setup MSI domain for ACPI based
platform device")
Reported-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like it was missed when setting support was added.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to set the NO_EVICT flag on the ghost object or otherwise we are
adding it to the LRU.
When it is added to the LRU we can run into a race between destroying
and evicting it again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=2Pvh
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-11-30' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This weeks instalment of fixes. Looks fairly like business as usual
and everything seems to rolling along. There was one MST fix applied
and reverted in the misc tree, but otherwise nothing too strange in
here.
core:
- incorrect master setting on error fix
i915:
- only GVT fixes this week:
* one MOCS register load
* rpm lock fix
* use after free
rcar-du:
- regression fix for group start
amdgpu:
- DP MST fix
- GPUVM fix for huge pages
- RLC fix for vega20
ast:
- fix EDID reading stability
- ioreg free fix
meson:
- sleep in irq fix
- vblank fixes
- array boundary fix"
* tag 'drm-fixes-2018-11-30' of git://anongit.freedesktop.org/drm/drm:
drm/ast: fixed reading monitor EDID not stable issue
drm/ast: Fix incorrect free on ioregs
Revert "drm/dp_mst: Skip validating ports during destruction, just ref"
drm/amdgpu: Add delay after enable RLC ucode
drm/amdgpu: Avoid endless loop in GPUVM fragment processing
drm/amdgpu: Cast to uint64_t before left shift
drm/meson: add support for 1080p25 mode
drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut()
drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config
drm/meson: Fixes for drm_crtc_vblank_on/off support
drm: set is_master to 0 upon drm_new_set_master() failure
drm/dp_mst: Skip validating ports during destruction, just ref
drm: rcar-du: Fix DU3 start/stop on M3-N
drm/amd/dm: Understand why attaching path/tile properties are needed
drm/amd/dm: Don't forget to attach MST encoders
drm/i915/gvt: Avoid use-after-free iterating the gtt list
drm/i915/gvt: ensure gpu is powered before do i915_gem_gtt_insert
drm/i915/gvt: not to touch undefined MOCS registers
Pull NVMe fixes from Christoph:
"Various fixlets all over."
* 'nvme-4.20' of git://git.infradead.org/nvme:
nvme-rdma: fix double freeing of async event data
nvme: flush namespace scanning work just before removing namespaces
nvme: warn when finding multi-port subsystems without multipathing enabled
nvme-pci: fix surprise removal
nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request()
nvme: Free ctrl device name on init failure
The stackleak_erase() function is called on the trampoline stack at the
end of syscall. This stack is not big enough for ftrace and kprobes
operations, e.g. it can be exhausted if we use kprobe_events for
stackleak_erase().
So let's disable function tracing and kprobes of stackleak_erase().
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 10e9ae9fab ("gcc-plugins: Add STACKLEAK plugin for tracking the kernel stack")
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.
Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
A set of small driver and core code fixes:
- Small series fixing longtime user triggerable bugs in the
ODP processing inside mlx5 and core code
- Various small driver malfunctions and crashes (use after, free, error
unwind, implementation bugs)
- A misfunction of the RDMA GID cache that can be triggered by the
administrator
-----BEGIN PGP SIGNATURE-----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=QrHg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"This is a bit later than usual for our first -rc but I'm not seeing
anything worry-some in the RDMA tree right now. Quiet so far this -rc
cycle, only a few internal driver related bugs and a small series
fixing ODP bugs found by more advanced testing.
A set of small driver and core code fixes:
- Small series fixing longtime user triggerable bugs in the ODP
processing inside mlx5 and core code
- Various small driver malfunctions and crashes (use after, free,
error unwind, implementation bugs)
- A misfunction of the RDMA GID cache that can be triggered by the
administrator"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Initialize return variable in case pagefault was skipped
IB/mlx5: Fix page fault handling for MW
IB/umem: Set correct address to the invalidation function
IB/mlx5: Skip non-ODP MR when handling a page fault
RDMA/hns: Bugfix pbl configuration for rereg mr
iser: set sector for ambiguous mr status errors
RDMA/rdmavt: Fix rvt_create_ah function signature
IB/mlx5: Avoid load failure due to unknown link width
IB/mlx5: Fix XRC QP support after introducing extended atomic
RDMA/bnxt_re: Avoid accessing the device structure after it is freed
RDMA/bnxt_re: Fix system hang when registration with L2 driver fails
RDMA/core: Add GIDs while changing MAC addr only for registered ndev
RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WR
net/mlx5: Fix XRC SRQ umem valid bits
Userspace hasn't used submit cmds with submit_offset != 0 for a while,
but this starts cropping up again with cmdstream sub-buffer-allocation
in libdrm_freedreno.
Doesn't do much good to increment the buf ptr before assigning it.
Fixes: 78b8e5b847 drm/msm: dump a rd GPUADDR header for all buffers in the command
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The msm_gpu_open() function should free "show_priv" on error or it
causes static checker warnings.
Fixes: 4f776f4511 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The current recovery code gets a pointer to the task struct and does a
few things all within the rcu_read_lock. This puts constraints on the
types of gfp flags that can be used within the rcu lock. This patch
instead gets a reference to the task within the rcu lock and releases
the lock immediately, this way the task stays afloat until we need it and
we also get to use the desired gfp flags.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
This patch simply checks first to see if the target can support crash dump
capture before proceeding.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Some error paths in configuration of admin queue free data buffer
associated with async request SQE without resetting the data buffer
pointer to NULL, This buffer is also freed up again if the controller
is shutdown or reset.
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Reviewed-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_stop_ctrl can be called also for reset flow and there is no need to
flush the scan_work as namespaces are not being removed. This can cause
deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
before controller teardown (and specifically I/O cancellation of the
scan_work itself) takes place, but the scan_work will be blocked anyways
so there is no need to flush it.
Instead, move scan_work flush to nvme_remove_namespaces() where it really
needs to flush.
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed by: James Smart <jsmart2021@gmail.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might
show up as invididual devices and cause problems, warn about it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
David Miller