Commit Graph

7819 Commits

Author SHA1 Message Date
Hans de Goede 132565d8ec ACPI: utils: Add acpi_evaluate_reg() helper
With a recent fix to the pinctrl-cherryview driver we now have
2 drivers open-coding the parameter building / passing for calling
_REG on an ACPI handle.

Add a helper for this, so that these 2 drivers can be converted to this
helper.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:40:25 +02:00
Zheng Zengkai 8e22c2e4a6 ACPI: debug: Make two functions static
Fix sparse warnings:

drivers/acpi/acpi_dbg.c:748:12: warning:
 symbol 'acpi_aml_init' was not declared. Should it be static?
drivers/acpi/acpi_dbg.c:774:13: warning:
 symbol 'acpi_aml_exit' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:33:07 +02:00
Hanjun Guo 95722237cb ACPI: sleep: Put the FACS table after using it
Put the FACS table after using it to release the table
mapping.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:17 +02:00
Hanjun Guo ead7ba1362 ACPI: scan: Put SPCR and STAO table after using it
The SPCR and STAO table needs to be released after
using it.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:17 +02:00
Hanjun Guo f900bf4951 ACPI: EC: Put the ACPI table after using it
The embedded controller boot resources table needs to be
released after using it.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: avoid adding a label in acpi_ec_ecdt_start() ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:17 +02:00
Hanjun Guo 11c7bdffc7 ACPI: APEI: Put the HEST table for error path
hest_tab will be used after hest_init(), but we need to release
it for error path.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:17 +02:00
Hanjun Guo 43f595dcab ACPI: APEI: Put the error record serialization table for error path
The mapped error record serialization table needs to be
released for error path of erst_init().

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:17 +02:00
Hanjun Guo 541156a38f ACPI: APEI: Put the error injection table for error path and module exit
The mapped error injection table will be used after einj_init()
for debugfs, but it should be released for module exit and error
path of einj_init().

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:17 +02:00
Hanjun Guo 3d995f88ad ACPI: APEI: Put the boot error record table after parsing
The mapped boot error record table is not used after
bert_init(), release it.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:17 +02:00
Hanjun Guo fe4e1a576e ACPI: watchdog: Put the watchdog action table after parsing
The mapped watchdog action table should be released after the
successfully parsing, and the failure path in the driver
initialization.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:17 +02:00
Hanjun Guo f8690227dd ACPI: LPIT: Put the low power idle table after using it
The mapped LPIT table is not used for runtime after init,
put the ACPI table to release the table mapping.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:16 +02:00
Erik Kaneda e3f7ae9ebb ACPICA: Fix required parameters for _NIG and _NIH
ACPICA commit 4b0e043386c7e698bea9e862f60a388647f56622

Previously, there was a mixup where _NIG required one parameter and
_NIH required zero parameters. This changes swaps these parameter
requirements. Now this change requires _NIH to be called with one
parameter and _NIG requires zero.

Link: https://github.com/acpica/acpica/commit/4b0e0433
Reported-by: Paul A Lohr <paul.a.lohr@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 10:55:54 +02:00
Erik Kaneda 6bfe5344b2 ACPICA: Dispatcher: add status checks
ACPICA commit 3244c1eeba9f9fb9ccedb875f7923a3d85e0c6aa

The status chekcs are used to to avoid NULL pointer dereference on
field objects

Link: https://github.com/acpica/acpica/commit/3244c1ee
Reported-by: Kurt Kennett <kurt_kennett@hotmail.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 10:55:54 +02:00
Erik Kaneda 034fdaa508 ACPICA: Disassembler: ignore AE_ALREADY_EXISTS status when parsing create operators
ACPICA commit cd66d0a50fdc9cc4dcd998e08e7aa3c4154bea2d

Disassembler is intended to emit existing ASL code as-is. Therefore,
error messages emitted during disassembly should be ignored or
handled in a way such that the disassembler can continue to parse the
AML. This change ignores AE_ALREADY_EXISTS errors during the deferred
Op parsing for create operators in order to complete parsing ASL
termlists.

Link: https://github.com/acpica/acpica/commit/cd66d0a5
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 10:55:54 +02:00
Erik Kaneda 2c1779f5ad ACPICA: Move acpi_gbl_next_cmd_num definition to acglobal.h
ACPICA commit 8296a24f33984c26a61103c590b049de3c9b61ff

This commit cleans up the code by moving the global definition out of
dbhistry.c to acglobal.h.

Link: https://github.com/acpica/acpica/commit/8296a24f
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 10:55:53 +02:00
Yue Haibing f5308a82e8 ACPICA: Make acpi_protocol_lengths static
ACPICA commit 0ebacf12b8ca66ce6d3fce4d349b3f2448da18cb

A linux-based static analyzer (sparse) caught this as a warning.
Making this variable static will result in better optimizations and
ensure that this variable does not get used outside of this file.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
[ek: commit message]

Link: https://github.com/acpica/acpica/commit/0ebacf12
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 10:55:53 +02:00
Ard Biesheuvel 539979b6ec ACPI/IORT: work around num_ids ambiguity
The ID mapping table structure of the IORT table describes the size of
a range using a num_ids field carrying the number of IDs in the region
minus one. This has been misinterpreted in the past in the parsing code,
and firmware is known to have shipped where this results in an ambiguity,
where regions that should be adjacent have an overlap of one value.

So let's work around this by detecting this case specifically: when
resolving an ID translation, allow one that matches right at the end of
a multi-ID region to be superseded by a subsequent one.

To prevent potential regressions on broken firmware that happened to
work before, only take the subsequent match into account if it occurs
at the start of a mapping region.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200501161014.5935-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-04 12:07:41 +01:00
Ard Biesheuvel 6d3b29d07c Revert "ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()"
This reverts commit 3c23b83a88.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200501161014.5935-2-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-04 12:07:41 +01:00
Rafael J. Wysocki 3a4ccdb92e Merge back system-wide PM material for v5.8. 2020-05-02 21:59:03 +02:00
Rob Herring 0b104773b4 PCI: Constify struct pci_ecam_ops
struct pci_ecam_ops is typically DT match table data which is defined to
be const. It's also best practice for ops structs to be const. Ideally,
we'd make struct pci_ops const as well, but that becomes pretty
invasive, so for now we just cast it where needed.

Link: https://lore.kernel.org/r/20200409234923.21598-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrew Murray <amurray@thegoodpenguin.co.uk>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Jonathan Chocron <jonnyc@amazon.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Robert Richter <rrichter@marvell.com>
Cc: Toan Le <toan@os.amperecomputing.com>
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Cc: linux-acpi@vger.kernel.org
2020-05-01 16:28:59 +01:00
Alexandru Gagniuc c100beb9cc PCI/AER: Use only _OSC to determine AER ownership
Per the PCI Firmware spec, r3.2, sec 4.5.1, the OS can request control of
AER via bit 3 of the _OSC Control Field.  In the returned value of the
Control Field:

  The firmware sets [bit 3] to 1 to grant control over PCI Express Advanced
  Error Reporting.  ...  after control is transferred to the operating
  system, firmware must not modify the Advanced Error Reporting Capability.
  If control of this feature was requested and denied or was not requested,
  firmware returns this bit set to 0.

Previously the pci_root driver looked at the HEST FIRMWARE_FIRST bit to
determine whether to request ownership of the AER Capability.  This was
based on ACPI spec v6.3, sec 18.3.2.4, and similar sections, which say
things like:

  Bit [0] - FIRMWARE_FIRST: If set, indicates that system firmware will
            handle errors from this source first.

  Bit [1] - GLOBAL: If set, indicates that the settings contained in this
            structure apply globally to all PCI Express Devices.

These ACPI references don't say anything about ownership of the AER
Capability.

Remove use of the FIRMWARE_FIRST bit and rely only on the _OSC bit to
determine whether we have control of the AER Capability.

Link: https://lore.kernel.org/r/20181115231605.24352-1-mr.nuke.me@gmail.com/ v1
Link: https://lore.kernel.org/r/20190326172343.28946-1-mr.nuke.me@gmail.com/ v2
Link: https://lore.kernel.org/r/67af2931705bed9a588b5a39d369cb70b9942190.1587925636.git.sathyanarayanan.kuppuswamy@linux.intel.com
[bhelgaas: commit log, note: Alex posted this identical patch 18 months
ago, and I failed to apply it then, so I made him the author, added links
to his postings, and added his Signed-off-by]
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
2020-04-30 17:19:12 -05:00
Ard Biesheuvel 7fb89e1d44 ACPI/IORT: take _DMA methods into account for named components
Where IORT nodes for named components can describe simple DMA limits
expressed as the number of address bits a device can drive, _DMA methods
in AML can express more complex topologies, involving DMA translation in
particular.

Currently, we only take this _DMA method into account if it appears on a
ACPI device node describing a PCIe root complex, but it is perfectly
acceptable to use them for named components as well, so let's ensure
we take them into account in those cases too.

Note that such named components are expected to reside under a
pseudo-bus node such as the ACPI0004 container device, which should be
providing the _DMA method as well as a _CRS (as mandated by the ACPI
spec). This is not enforced by the code however.

Reported-by: Andrei Warkentin <awarkentin@vmware.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200420092753.9819-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-04-28 18:06:07 +01:00
Kai-Heng Feng a9b760b026 PM: ACPI: Output correct message on target power state
Transitioned power state logged at the end of setting ACPI power.

However, D3cold won't be in the message because state can only be
D3hot at most.

Use target_state to corretly report when power state is D3cold.

Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-27 10:33:40 +02:00
Zou Wei 5c447c18d1 ACPI: CPPC: Make some symbols static
Fix the following sparse warnings:

drivers/acpi/cppc_acpi.c:353:20: warning: symbol 'cppc_mbox_cl' was not declared. Should it be static?
drivers/acpi/cppc_acpi.c:600:5: warning: symbol 'pcc_data_alloc' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-27 10:32:56 +02:00
Zhang Rui 496121c021 ACPI: processor: idle: Allow probing on platforms with one ACPI C-state
It is possible for ACPI _CST to return only one ACPI C-state, for
example, when deep cstate disabled in the BIOS.

And it is better for the acpi_idle driver to probe succesfully in
this case as well for consistency.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-27 10:32:44 +02:00
Rafael J. Wysocki 2a3f34750b PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED
Rename DPM_FLAG_LEAVE_SUSPENDED to DPM_FLAG_MAY_SKIP_RESUME which
matches its purpose more closely.

No functional impact.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-24 21:34:22 +02:00
Rafael J. Wysocki fa2bfead91 PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended()
Because all callers of dev_pm_smart_suspend_and_suspended use it only
for checking whether or not to skip driver suspend callbacks for a
device, rename it to dev_pm_skip_suspend() in analogy with
dev_pm_skip_resume().

No functional impact.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-24 21:32:41 +02:00
Rafael J. Wysocki 76c70cb58c PM: sleep: core: Rename dev_pm_may_skip_resume()
The name of dev_pm_may_skip_resume() may be easily confused with the
power.may_skip_resume flag which is not checked by that function, so
rename the former as dev_pm_skip_resume().

No functional impact.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-24 21:32:11 +02:00
Rafael J. Wysocki 0fe8a1be59 PM: sleep: core: Rework the power.may_skip_resume handling
Because the power.may_skip_resume device status bit is taken
into account in combination with the DPM_FLAG_LEAVE_SUSPENDED
driver flag, it can be set to 'true' for all devices in the
"suspend" phase of a suspend-resume cycle, so do that.

Then, neither the PM core nor the middle-layer (sybsystem) code
handling it needs to set it to 'true' any more and it just has
to be cleared if there is a reason to avoid skipping the "noirq"
and "early" resume callbacks provided by the driver, so update
the code in question accordingly.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-24 21:31:28 +02:00
Rafael J. Wysocki 6e176bf8d4 PM: sleep: core: Do not skip callbacks in the resume phase
The current code in device_resume_noirq() causes the entire early
resume and resume phases of device suspend to be skipped for
devices for which the noirq resume phase have been skipped (due
to the LEAVE_SUSPENDED flag being set) on the premise that those
devices should stay in runtime-suspend after system-wide resume.

However, that may not be correct in two situations.  First, the
middle layer (subsystem) noirq resume callback may be missing for
a given device, but its early resume callback may be present and it
may need to do something even if it decides to skip the driver
callback.  Second, if the device's wakeup settings were adjusted
in the suspend phase without resuming the device (that was in
runtime suspend at that time), they most likely need to be
adjusted again in the resume phase and so the driver callback
in that phase needs to be run.

For the above reason, modify the core to allow the middle layer
->resume_late callback to run even if its ->resume_noirq callback
is missing (and the core has skipped the driver-level callback
in that phase) and to allow all device callbacks to run in the
resume phase.  Also make the core set the PM-runtime status of
devices with SMART_SUSPEND set whose resume callbacks are not
skipped to "active" in the "noirq" resume phase and update the
affected subsystems (PCI and ACPI) accordingly.

After this change, middle-layer (subsystem) callbacks will always
be invoked in all phases of system suspend and resume and driver
callbacks will always run in the prepare, suspend, resume, and
complete phases for all devices.

For devices with SMART_SUSPEND set, driver callbacks will be
skipped in the late and noirq phases of system suspend if those
devices remain in runtime suspend in __device_suspend_late().
Driver callbacks will also be skipped for them during the
noirq and early phases of the "thaw" transition related to
hibernation in that case.

Setting LEAVE_SUSPENDED means that the driver allows its callbacks
to be skipped in the noirq and early phases of system resume, but
some additional conditions need to be met for that to happen (among
other things, the power.may_skip_resume flag needs to be set for the
device during system suspend for the driver callbacks to be skipped
during the subsequent resume transition).

For all devices with SMART_SUSPEND set whose driver callbacks are
invoked during system resume, the PM-runtime status will be set to
"active" (by the core).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-24 21:31:14 +02:00
Rafael J. Wysocki 0db0d142e2 Merge branch 'acpi-pci'
* acpi-pci:
  ACPI/PCI: pci_link: use extended_irq union member when setting ext-irq shareable
2020-04-24 21:03:57 +02:00
Andy Shevchenko f37b451f45 libnvdimm: Replace guid_copy() with import_guid() where it makes sense
There is a specific API to treat raw data as GUID, i.e. import_guid().
Use it instead of guid_copy() with explicit casting.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200422130539.45636-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-04-22 16:26:03 -07:00
Hans de Goede 2b6022a32e ACPI: button: Drop no longer necessary Asus T200TA lid_init_state quirk
Commit 17e5888e4e ("x86: Select HARDIRQS_SW_RESEND on x86") fixes
the edge-triggered embedded-controller (WC) IRQ not being replayed after
resume when woken by opening the lid, which gets signaled by the EC.

This means that the lid_init_state=ACPI_BUTTON_LID_INIT_OPEN quirk for
the Asus T200TA is no longer necessary, the lid now works properly
without it, so drop the quirk.

Fixes: 17e5888e4e ("x86: Select HARDIRQS_SW_RESEND on x86")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-20 10:37:15 +02:00
Hans de Goede 1c5e1cdd7c ACPI/PCI: pci_link: use extended_irq union member when setting ext-irq shareable
The case ACPI_RESOURCE_TYPE_EXTENDED_IRQ inside acpi_pci_link_set()
is correctly using resource->res.data.extended_irq.foo for most settings,
but for the shareable setting it so far has accidentally been using
resource->res.data.irq.shareable instead of
resource->res.data.extended_irq.shareable.

Note that the old code happens to also work because the shareable field
offset is the same for both the acpi_resource_irq and
acpi_resource_extended_irq structs.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-20 10:36:22 +02:00
Tony Luck 7fc0b9b995 EDAC: Drop the EDAC report status checks
When acpi_extlog was added, we were worried that the same error would
be reported more than once by different subsystems. But in the ensuing
years I've seen complaints that people could not find an error log
(because this mechanism suppressed the log they were looking for).

Rip it all out. People are smart enough to notice the same address from
different reporting mechanisms.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-8-tony.luck@intel.com
2020-04-14 16:01:01 +02:00
Tony Luck 23ba710a08 x86/mce: Fix all mce notifiers to update the mce->kflags bitmask
If the handler took any action to log or deal with the error, set a bit
in mce->kflags so that the default handler on the end of the machine
check chain can see what has been done.

Get rid of NOTIFY_STOP returns. Make the EDAC and dev-mcelog handlers
skip over errors already processed by CEC.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200214222720.13168-5-tony.luck@intel.com
2020-04-14 15:59:26 +02:00
Linus Torvalds d3e5e977ab More ACPI updates for 5.7-rc1
Prevent a false-positive static checker warning from triggering
 in the ACPI EC driver (Rafael Wysocki), fix white space in an
 ACPI document (Vilhelm Prytz) and add static annotation to one
 variable (Jason Yan).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl6QPusSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxVpUQAKRG324LPa03jGfZi0TtkQGPmNJg4c9k
 bzWtIgegxfhl+v9eSo397ib0mj/ieaNgolV4q9MD5RxOlN0a3Gm0f4pA76nPmkog
 O+Uvk+b5VXb9wVPIC7WbSk9jgvghBvOA8qCA6AMJit7Q/yRKaOcPtI/Bu6HFaSn6
 JznZo6+qImeD5iiOmhfEW0tXXfu4y3BfJ2rz49A63Wkqif0CrcjZouFPbPdnphVJ
 LDJpkpQt0HK19BehCTQvMROq7FSYIURMof33RZBbDQ+YXPoUUsNq7REYcgt6Hagf
 K8mjg4W0W1pkE8S2/pl2j+5yY8c3NzNSQG3tZfZD9df5FPyQSDhHEvMoQxQSu/Vf
 pdm+1yyIVz9uMfl0xE4CTW0zkd3WBCQ6wV06/pDv7F9VAdBNJ095XqoQviEp4TLq
 zix5/Xrv84CzrsSTvi9CmLWdi7PXUX1XpNUQLU7RvnHDHBfTZBOZ0dCoJljcNdBp
 qLkf9pCMMvLj3tjZUBsWyB8QGvp1lo8ZF+/kS0JpeYAebx4KsEuAyEb2Tuw3JS4r
 5qpMSf4M995NzDbnyWumzYffN+xawVSp9MZyvPn8N75MgvLysqehdWvVa+52dfv4
 dD3/zRLeXjPtVhwHLXzLAFPBFQyXY/b9cWYq93adgWsTMcLw3gb1ywl18but8AO7
 RvpGNgi8BTq2
 =wKsb
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "These prevent a false-positive static checker warning from triggering
  in the ACPI EC driver (Rafael Wysocki), fix white space in an ACPI
  document (Vilhelm Prytz) and add static annotation to one variable
  (Jason Yan)"

* tag 'acpi-5.7-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI, x86/boot: make acpi_nobgrt static
  Documentation: firmware-guide: ACPI: fix table alignment in namespace.rst
  ACPI: EC: Fix up fast path check in acpi_ec_add()
2020-04-10 09:52:15 -07:00
Rafael J. Wysocki 0214da7cce Merge branches 'acpi-ec' and 'acpi-x86'
* acpi-ec:
  ACPI: EC: Fix up fast path check in acpi_ec_add()

* acpi-x86:
  ACPI, x86/boot: make acpi_nobgrt static
2020-04-10 11:31:43 +02:00
Linus Torvalds 9b06860d7c libnvdimm for 5.7
- Add support for region alignment configuration and enforcement to
   fix compatibility across architectures and PowerPC page size
   configurations.
 
 - Introduce 'zero_page_range' as a dax operation. This facilitates
   filesystem-dax operation without a block-device.
 
 - Introduce phys_to_target_node() to facilitate drivers that want to
   know resulting numa node if a given reserved address range was
   onlined.
 
 - Advertise a persistence-domain for of_pmem and papr_scm. The
   persistence domain indicates where cpu-store cycles need to reach in
   the platform-memory subsystem before the platform will consider them
   power-fail protected.
 
 - Promote numa_map_to_online_node() to a cross-kernel generic facility.
 
 - Save x86 numa information to allow for node-id lookups for reserved
   memory ranges, deploy that capability for the e820-pmem driver.
 
 - Pick up some miscellaneous minor fixes, that missed v5.6-final,
   including a some smatch reports in the ioctl path and some unit test
   compilation fixups.
 
 - Fixup some flexible-array declarations.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEf41QbsdZzFdA8EfZHtKRamZ9iAIFAl6LtIAACgkQHtKRamZ9
 iAIwRA/8CLVVuQpgHQ1tqK4h8CZPrISFXh7wy7uhocEU2xrDh6iGVnLztmoLRr2k
 5f8T9lRzreSAwIVL5DbGqP1pFncqIt9VMnKsFlaPMBGCBNR+hURY0iBCNjIT+jiq
 BOzLd52MR2rqJxeXGTMUbWrBrbmuj4mZPdmGVuFFe7GFRpoaVpCgOo+296eWa/ot
 gIOFUTonZY7STYjNvDok0TXCmiCFuJb+P+y5ldfCPShHvZhTiaF53jircja8vAjO
 G5dt8ixBKUK0rXRc4SEQsQhAZNcAFHb6Gy5lg4C2QzhTF374xTc9usJZNWbIE9iM
 5mipBYvjVuoY+XaCNZDkaRcJIy/jqB15O6l3QIWbZLGaK9m95YPp9LmkPFwd3JpO
 e3rO24ML471DxqB9iWIiJCNcBBocLOlnd6qAQTpppWDpGNbudwXvfsmKHmKIScSE
 x+IDCdscLmmm+WG2dLmLraWOVPu42xZFccoQCi4M3TTqfeB9pZ9XckFQ37zX62zG
 5t+7Ek+t1W4QVt/JQYVKH03XT15sqUpVknvx0Hl4Y5TtbDOkFLkO8RN0/HyExDef
 7iegS35kqTsM4EfZQ+9juKbI2JBAjHANcbj0V4dogqaRj6vr3akumBzUtuYqAofv
 qU3s9skmLsEemOJC+ns2PT8vl5dyIoeDfH0r2XvGWxYqolMqJpA=
 =sY4N
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm and dax updates from Dan Williams:
 "There were multiple touches outside of drivers/nvdimm/ this round to
  add cross arch compatibility to the devm_memremap_pages() interface,
  enhance numa information for persistent memory ranges, and add a
  zero_page_range() dax operation.

  This cycle I switched from the patchwork api to Konstantin's b4 script
  for collecting tags (from x86, PowerPC, filesystem, and device-mapper
  folks), and everything looks to have gone ok there. This has all
  appeared in -next with no reported issues.

  Summary:

   - Add support for region alignment configuration and enforcement to
     fix compatibility across architectures and PowerPC page size
     configurations.

   - Introduce 'zero_page_range' as a dax operation. This facilitates
     filesystem-dax operation without a block-device.

   - Introduce phys_to_target_node() to facilitate drivers that want to
     know resulting numa node if a given reserved address range was
     onlined.

   - Advertise a persistence-domain for of_pmem and papr_scm. The
     persistence domain indicates where cpu-store cycles need to reach
     in the platform-memory subsystem before the platform will consider
     them power-fail protected.

   - Promote numa_map_to_online_node() to a cross-kernel generic
     facility.

   - Save x86 numa information to allow for node-id lookups for reserved
     memory ranges, deploy that capability for the e820-pmem driver.

   - Pick up some miscellaneous minor fixes, that missed v5.6-final,
     including a some smatch reports in the ioctl path and some unit
     test compilation fixups.

   - Fixup some flexible-array declarations"

* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
  dax: Move mandatory ->zero_page_range() check in alloc_dax()
  dax,iomap: Add helper dax_iomap_zero() to zero a range
  dax: Use new dax zero page method for zeroing a page
  dm,dax: Add dax zero_page_range operation
  s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
  dax, pmem: Add a dax operation zero_page_range
  pmem: Add functions for reading/writing page to/from pmem
  libnvdimm: Update persistence domain value for of_pmem and papr_scm device
  tools/test/nvdimm: Fix out of tree build
  libnvdimm/region: Fix build error
  libnvdimm/region: Replace zero-length array with flexible-array member
  libnvdimm/label: Replace zero-length array with flexible-array member
  ACPI: NFIT: Replace zero-length array with flexible-array member
  libnvdimm/region: Introduce an 'align' attribute
  libnvdimm/region: Introduce NDD_LABELING
  libnvdimm/namespace: Enforce memremap_compat_align()
  libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
  libnvdimm: Out of bounds read in __nd_ioctl()
  acpi/nfit: improve bounds checking for 'func'
  mm/memremap_pages: Introduce memremap_compat_align()
  ...
2020-04-08 21:03:40 -07:00
Linus Torvalds 0906d8b975 IOMMU Updates for Linux v5.7
Including:
 
 	- ARM-SMMU support for the TLB range invalidation command in
 	  SMMUv3.2.
 
 	- ARM-SMMU introduction of command batching helpers to batch up
 	  CD and ATC invalidation.
 
 	- ARM-SMMU support for PCI PASID, along with necessary PCI
 	  symbol exports.
 
 	- Introduce a generic (actually rename an existing) IOMMU
 	  related pointer in struct device and reduce the IOMMU related
 	  pointers.
 
 	- Some fixes for the OMAP IOMMU driver to make it build on 64bit
 	  architectures.
 
 	- Various smaller fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl6MmlQACgkQK/BELZcB
 GuP9ug//QtyPYRYdO4ltD6mPvfB7V0qdXksJz+ZVbPOMvqUs1jr1FVYFH1HkOVu5
 mFD6OJuQQJrrGukXMERyVgDhUqNr+xHrkGS+X67NrOkUrguyvUfLYSU/GmOH/kdk
 w1Smp7pTcHHAMmxGyQWTSFa9jSxKes5ZYBo065Z3/SlcIcTTkbw7V87N3RPrlnCX
 s/K7CtSGnKJMpL9DVuNH27eqGlfiuIrQhj/vTQVSn1nF7TjaGKXaRXj+3fcUgrIt
 KAfflWiTJncMY6WLjz65iiUtUvgA2Mmgn3CKJnWjgECd70+NybLQ9OAvQO+A2H6s
 8XO9DsOOe8HFq/ljev1JGSw5LgB5Ip1RtSk7Ost6mkUFzLlaeTBJFQeHbECI9dne
 hksRYL4R8bwiQu+MkQe7HLa6TDb+asqjsayIO3M1oIpF+8mIz/oNOGCeP0cqSiuj
 lVMnblAWatrsZrf+AlxZKddIJWiduXoTjtpV64HTTvZeL4/g3kY0ykBXpS4xLj5V
 s0KvR6kjR1LYUgpe9jJ3CJTdIlU4MzSlrtq4CYFZvRa7rBLmk2cGsR1jiA3GTGpn
 bcqOQNgb5X1mpAzmOZb//pbjozgvCjQpQexyU4tRzs38yk+TK5OnOe5z4M1srHPY
 7dTZoUEpAcRm4K+JFQ3+yOtxRTsINYyFUL/Qt8ALbWy4hXluRGY=
 =nhuS
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - ARM-SMMU support for the TLB range invalidation command in SMMUv3.2

 - ARM-SMMU introduction of command batching helpers to batch up CD and
   ATC invalidation

 - ARM-SMMU support for PCI PASID, along with necessary PCI symbol
   exports

 - Introduce a generic (actually rename an existing) IOMMU related
   pointer in struct device and reduce the IOMMU related pointers

 - Some fixes for the OMAP IOMMU driver to make it build on 64bit
   architectures

 - Various smaller fixes and improvements

* tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
  iommu: Move fwspec->iommu_priv to struct dev_iommu
  iommu/virtio: Use accessor functions for iommu private data
  iommu/qcom: Use accessor functions for iommu private data
  iommu/mediatek: Use accessor functions for iommu private data
  iommu/renesas: Use accessor functions for iommu private data
  iommu/arm-smmu: Use accessor functions for iommu private data
  iommu/arm-smmu: Refactor master_cfg/fwspec usage
  iommu/arm-smmu-v3: Use accessor functions for iommu private data
  iommu: Introduce accessors for iommu private data
  iommu/arm-smmu: Fix uninitilized variable warning
  iommu: Move iommu_fwspec to struct dev_iommu
  iommu: Rename struct iommu_param to dev_iommu
  iommu/tegra-gart: Remove direct access of dev->iommu_fwspec
  drm/msm/mdp5: Remove direct access of dev->iommu_fwspec
  ACPI/IORT: Remove direct access of dev->iommu_fwspec
  iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API
  iommu/virtio: Reject IOMMU page granule larger than PAGE_SIZE
  iommu/virtio: Fix freeing of incomplete domains
  iommu/virtio: Fix sparse warning
  iommu/vt-d: Add build dependency on IOASID
  ...
2020-04-08 11:00:00 -07:00
Linus Torvalds 7e63420847 Additional ACPI updates for 5.7-rc1
- Update the ACPICA code in the kernel to upstream revision 20200326
    including:
 
    * Fix for a typo in a comment field (Bob Moore).
    * acpiExec namespace init file fixes (Bob Moore).
    * Addition of NHLT to the known tables list (Cezary Rojewski).
    * Conversion of PlatformCommChannel ASL keyword to PCC (Erik
      Kaneda).
    * acpiexec cleanup (Erik Kaneda).
    * WSMT-related typo fix (Erik Kaneda).
    * sprintf() utility function fix (John Levon).
    * IVRS IVHD type 11h parsing implementation (Michał Żygowski).
    * IVRS IVHD type 10h reserved field name fix (Michał Żygowski).
 
  - Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai).
 
  - Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
    Kammela).
 
  - Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans
    de Goede).
 
  - Fix documentation of the "acpi_backlight" kernel command line
    switch (Randy Dunlap).
 
  - Clean up the acpi_get_psd_map() CPPC library routine (Liguang
    Zhang).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl6LQEASHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxqfoQAI/GPq7xhb8jOofmTfLxa4ahO2NDxK1E
 Ye4Tcm8JLv78hro7iMUlbPsRXm15lyDxMldGRfxsiLFTF2xQtYhdTnPx+KZ439j+
 QokMHUT6gFEMAV7OPFvXd2r58ShJJHezobbn241zTILx1c3ai66dCQrqyhYjlZ28
 0hUCyY4ilgXWuYInlckGW3Rp/Qxc9IVOxzFUV90EW9pTb4vKzoqznjNm+dpY8rHm
 QFNb2BkTJygOPmJiumi/yJX+74YSZrzW5fS1PDQS4Lr46j0imvWVVataMd1qbQ0+
 fDhvhL7IimHiM/qZg67hKpsAt6AcQPhaZ6JyoEGUoafxpBQN0a7b5rMwmL0P/HWV
 pL5mKM+jc7zh0HTb+xkpNotJxT+KBFo1jTRxGyVAnK8SThzlyFhKhetiOwaHCIDv
 dNYao6bCNsuGLh3T/09xbAmEeCSt7k+ok892N4o9wzqNfoDg6fX/c0M5ZD1F+Awb
 l9agU7XChziyDJwAqTbqndx71DK4ALrhZa1tNKA5PGTY8b5XrojoKsOyYk6PYA1x
 CqU20muRV4VAzB0pvdiwBc2Yrtfiv32mv5jMNrqrrv3D6S6R8vBUNhHlWKu/75a9
 9muIoEHWnK0/a9kmVJG8CUSXTTTPQpvOovesznruTxvGx3Mp9gw+d3/1tjuA/QNM
 ZoOOru5AEyi+
 =b3Dp
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "Additional ACPI updates.

  These update the ACPICA code in the kernel to the 20200326 upstream
  revision, fix an ACPI-related CPU hotplug deadlock on x86, update
  Intel Tiger Lake device IDs in some places, add a new ACPI backlight
  blacklist entry, update the "acpi_backlight" kernel command line
  switch documentation and clean up a CPPC library routine.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20200326
     including:
      * Fix for a typo in a comment field (Bob Moore)
      * acpiExec namespace init file fixes (Bob Moore)
      * Addition of NHLT to the known tables list (Cezary Rojewski)
      * Conversion of PlatformCommChannel ASL keyword to PCC (Erik
        Kaneda)
      * acpiexec cleanup (Erik Kaneda)
      * WSMT-related typo fix (Erik Kaneda)
      * sprintf() utility function fix (John Levon)
      * IVRS IVHD type 11h parsing implementation (Michał Żygowski)
      * IVRS IVHD type 10h reserved field name fix (Michał Żygowski)

   - Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai)

   - Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
     Kammela)

   - Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de
     Goede)

   - Fix documentation of the "acpi_backlight" kernel command line
     switch (Randy Dunlap)

   - Clean up the acpi_get_psd_map() CPPC library routine (Liguang
     Zhang)"

* tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  x86: ACPI: fix CPU hotplug deadlock
  thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
  platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
  ACPI: Update Tiger Lake ACPI device IDs
  ACPI: video: Use native backlight on Acer Aspire 5783z
  ACPI: video: Docs update for "acpi_backlight" kernel parameter options
  ACPICA: Update version 20200326
  ACPICA: Fixes for acpiExec namespace init file
  ACPICA: Add NHLT table signature
  ACPICA: WSMT: Fix typo, no functional change
  ACPICA: utilities: fix sprintf()
  ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
  ACPICA: Change PlatformCommChannel ASL keyword to PCC
  ACPICA: Fix IVRS IVHD type 10h reserved field name
  ACPICA: Implement IVRS IVHD type 11h parsing
  ACPICA: Fix a typo in a comment field
  ACPI: CPPC: clean up acpi_get_psd_map()
2020-04-06 10:35:06 -07:00
Linus Torvalds ef05db16bb Additional power management updates for 5.7-rc1
- Fix corner-case suspend-to-idle wakeup issue on systems where
    the ACPI SCI is shared with another wakeup source (Hans de Goede).
 
  - Add document describing system-wide suspend and resume code flows
    to the admin guide (Rafael Wysocki).
 
  - Add kernel command line option to set pm_debug_messages (Chen Yu).
 
  - Choose schedutil as the preferred scaling governor by default on
    ARM big.LITTLE systems and on x86 systems using the intel_pstate
    driver in the passive mode (Linus Walleij, Rafael Wysocki).
 
  - Drop racy and redundant checks from the PM core's device_prepare()
    routine (Rafael Wysocki).
 
  - Make resume from hibernation take the hibernation_restore() return
    value into account (Dexuan Cui).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl6LN9kSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxqj0P/3Uh16YIKOUeXosqtptJJiWgZoWu82aR
 H2uzc9hCV6k/tnSG/Y3ZGgI4dUZGcJ94By80XoWceZ97CC1YuBHpF/dHSupTCcvt
 tBEP9H2qbSLi9d2PhlEUJ0B6PBpWEjCzOb519Tzj4sd67FGhsKeihXl+WXdgaaKZ
 hpdj+tBkQ6Dxb7CXVw/mUpWlg/nmF+yRqpK5By+V0WMOlQtg4Ecb3lMqaJPr7b4F
 W/I5m4PE9QG+VetSSXoe7CKfLo2fsDtyHH6ioTJ9xklcOflIblZ3MYf3sKgOuuny
 m/6Zm71HmQwWRkjA/V+C/eTr0VX2TuMUALfA8i+uZBo//I58TTJq9oqosu8eao2P
 5MR79Vwa+eqtYRgpHCTM4JO1iyKiE+FTfVAPOS4hHOKjqY9BUj0YtWHxk8abdzQd
 owv9DjEtGKcipAnCKtWDIS9ikZ5TOsYiGgWyJQnoonpFY+0s3DwtRdi+gBLJliSj
 5j7sRv9wJrJRFZ7tRMHHAqoQkSYqf4YdBuRBG7F/M44anveORBJNaTbPgm30qbUP
 FXD9hTJn/4Q2nmBSzqvEv0+TJrWoCyKduzr5uNsR0eyg48w9mrlUDDkW7dOMb3DU
 WV6QGNomMuKIY4DHKCo3/k21NmzW2JN7zhUrErCnl0bXjV2AM71Cb2xjUD1eNOqV
 9LxPDvAmZoGt
 =QFDr
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "Additional power management updates.

  These fix a corner-case suspend-to-idle wakeup issue on systems where
  the ACPI SCI is shared with another wakeup source, add a kernel
  command line option to set pm_debug_messages via the kernel command
  line, add a document desctibing system-wide suspend and resume code
  flows, modify cpufreq Kconfig to choose schedutil as the preferred
  governor by default in a couple of cases and do some assorted
  cleanups.

  Specifics:

   - Fix corner-case suspend-to-idle wakeup issue on systems where the
     ACPI SCI is shared with another wakeup source (Hans de Goede).

   - Add document describing system-wide suspend and resume code flows
     to the admin guide (Rafael Wysocki).

   - Add kernel command line option to set pm_debug_messages (Chen Yu).

   - Choose schedutil as the preferred scaling governor by default on
     ARM big.LITTLE systems and on x86 systems using the intel_pstate
     driver in the passive mode (Linus Walleij, Rafael Wysocki).

   - Drop racy and redundant checks from the PM core's device_prepare()
     routine (Rafael Wysocki).

   - Make resume from hibernation take the hibernation_restore() return
     value into account (Dexuan Cui)"

* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
  ACPI: PM: Add acpi_[un]register_wakeup_handler()
  Documentation: PM: sleep: Document system-wide suspend code flows
  cpufreq: Select schedutil when using big.LITTLE
  PM: sleep: Add pm_debug_messages kernel command line option
  PM: sleep: core: Drop racy and redundant checks from device_prepare()
  PM: hibernate: Propagate the return value of hibernation_restore()
  cpufreq: intel_pstate: Select schedutil as the default governor
2020-04-06 10:14:39 -07:00
Rafael J. Wysocki d7e0481c0d ACPI: EC: Fix up fast path check in acpi_ec_add()
The fast path check in acpi_ec_add() is not incorrect, because in
fact acpi_device_hid(device) can be equal to ACPI_ECDT_HID only if
boot_ec is not NULL, but it may confuse static checkers, so change
it to explicitly check boot_ec upfront and use the slow path if
that pointer is NULL.

Link: https://lore.kernel.org/linux-acpi/20200406144217.GA68494@mwanda/
Fixes: 3d9b8dd832 ("ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-06 17:40:27 +02:00
Rafael J. Wysocki 33ae7f715e Merge branches 'acpi-cppc', 'acpi-video' and 'acpi-drivers'
* acpi-cppc:
  ACPI: CPPC: clean up acpi_get_psd_map()

* acpi-video:
  ACPI: video: Use native backlight on Acer Aspire 5783z
  ACPI: video: Docs update for "acpi_backlight" kernel parameter options

* acpi-drivers:
  thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
  platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
  ACPI: Update Tiger Lake ACPI device IDs
2020-04-06 16:23:44 +02:00
Rafael J. Wysocki fd0360583a Merge branch 'acpica'
* acpica:
  ACPICA: Update version 20200326
  ACPICA: Fixes for acpiExec namespace init file
  ACPICA: Add NHLT table signature
  ACPICA: WSMT: Fix typo, no functional change
  ACPICA: utilities: fix sprintf()
  ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
  ACPICA: Change PlatformCommChannel ASL keyword to PCC
  ACPICA: Fix IVRS IVHD type 10h reserved field name
  ACPICA: Implement IVRS IVHD type 11h parsing
  ACPICA: Fix a typo in a comment field
2020-04-06 16:23:31 +02:00
Hans de Goede ddfd9dcf27 ACPI: PM: Add acpi_[un]register_wakeup_handler()
Since commit fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering without there being a wakeup
cause recognized by the ACPI sleep code will no longer wakeup the system.

This works as intended, but this is a problem for devices where the SCI
is shared with another device which is also a wakeup source.

In the past these, from the pov of the ACPI sleep code, spurious SCIs
would still cause a wakeup so the wakeup from the device sharing the
interrupt would actually wakeup the system. This now no longer works.

This is a problem on e.g. Bay Trail-T and Cherry Trail devices where
some peripherals (typically the XHCI controller) can signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system, this uses the same interrupt as the SCI.
These wakeups are handled through a special INT0002 ACPI device which
checks for events in the GPE0a_STS for this and takes care of acking
the PME so that the shared interrupt stops triggering.

The change to the ACPI sleep code to ignore the spurious SCI, causes
the system to no longer wakeup on these PME events. To make things
worse this means that the INT0002 device driver interrupt handler will
no longer run, causing the PME to not get cleared and resulting in the
system hanging. Trying to wakeup the system after such a PME through e.g.
the power button no longer works.

Add an acpi_register_wakeup_handler() function which registers
a handler to be called from acpi_s2idle_wake() and when the handler
returns true, return true from acpi_s2idle_wake().

The INT0002 driver will use this mechanism to check the GPE0a_STS
register from acpi_s2idle_wake() and to tell the system to wakeup
if a PME is signaled in the register.

Fixes: fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-04 19:45:18 +02:00
Qian Cai 696ac2e3bf x86: ACPI: fix CPU hotplug deadlock
Similar to commit 0266d81e9b ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():

"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.

It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.

Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."

 WARNING: possible circular locking dependency detected
 ------------------------------------------------------
 cpuhp/1/15 is trying to acquire lock:
 ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630

 but task is already holding lock:
 ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (cpu_hotplug_lock){++++}-{0:0}:
 cpus_read_lock+0x3e/0xc0
 irq_calc_affinity_vectors+0x5f/0x91
 __pci_enable_msix_range+0x10f/0x9a0
 pci_alloc_irq_vectors_affinity+0x13e/0x1f0
 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
 pqi_ctrl_init+0x72f/0x1618 [smartpqi]
 pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
 local_pci_probe+0x7a/0xc0
 work_for_cpu_fn+0x2e/0x50
 process_one_work+0x57e/0xb90
 worker_thread+0x363/0x5b0
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 other info that might help us debug this:

 Chain exists of:
 (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock

 Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
 lock(cpuidle_lock);
                         lock(cpuhp_state-up);
                         lock(cpuidle_lock);
 lock((work_completion)(&wfc.work));

 *** DEADLOCK ***

 3 locks held by cpuhp/1/15:
 #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 Call Trace:
 dump_stack+0xa0/0xea
 print_circular_bug.cold.52+0x147/0x14c
 check_noncircular+0x295/0x2d0
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

Signed-off-by: Qian Cai <cai@lca.pw>
Tested-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-04 16:28:24 +02:00
Linus Torvalds 86f26a77cb pci-v5.7-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl6GTQMUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vy3PhAAmqpYBRobOsG8QbmKDjoJEFtkqdvD
 z6+4zf/R+hF11RyXjMDwihIe8d+tkQ4eAaYu6Oh5PrTyanz0G0PgeCrivZeytULk
 thqQIWzDQMVA5vN/2/Vy8s5s+3HzP8z/MZOFScJ7+xA1MndXptPRTNmFUbjx+GAv
 x8/pTp0u9AF6m7itX65DxXvwkzjWamt+Ar4Yx2IcuKAU/M5RtfuZO3PpDnqn7/wk
 JFlkRoYeFB6qNnnkPdeyPHl9dALhuhzgdTyklQEnKVW3nf3xThYDhcEwdh6kBQgl
 0dH8lL5LXy7PKGN8RES4wB0Vqndw/HlsCF5O4wkkfItbnbJxGJtS139e5973m0ud
 sgWvF4yJAT2jCKhIeNz34sePQJMyWALhv0XzZCsJ0YeGHsrV1jrHELkwUT1+eIsT
 3UV0iZ6aL06zQJDyKUbbIcQzEQ/wwBC+x9VgsyL54K1quCQZ1N1Nl/dvrb4cRG9m
 m9EhJK/brDf4c0uFlOmMTSxV1t5J+z6ZSQnh1ShD/o5yBsxqN6q5brDT6LEs+jbM
 LsIkA18jJOd4OyiDs98YiFKvIfFQbQ0LEBQpJwhF0snvfBFMMbUYN/T/NYneWON/
 F0TpkFoP7PXDuq55iNaLdnObfzrpC9kdzUyWvePUvjxIl55bkf+/qtUny+H48t4L
 dNggvW052d7BHes=
 =deWu
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)

   - Add more 32 GT/s link speed decoding and improve the implementation
     (Yicong Yang)

  Resource management:

   - Add support for sizing programmable host bridge apertures and fix a
     related alpha Nautilus regression (Ivan Kokshaysky)

  Interrupts:

   - Add boot interrupt quirk mechanism for Xeon chipsets and document
     boot interrupts (Sean V Kelley)

  PCIe native device hotplug:

   - When possible, disable in-band presence detect and use PDS
     (Alexandru Gagniuc)

   - Add DMI table for devices that don't use in-band presence detection
     but don't advertise that correctly (Stuart Hayes)

   - Fix hang when powering slots up/down via sysfs (Lukas Wunner)

   - Fix an MSI interrupt race (Stuart Hayes)

  Virtualization:

   - Add ACS quirks for Zhaoxin devices (Raymond Pang)

  Error handling:

   - Add Error Disconnect Recover (EDR) support so firmware can report
     devices disconnected via DPC and we can try to recover (Kuppuswamy
     Sathyanarayanan)

  Peer-to-peer DMA:

   - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
     Maier)

  ASPM:

   - Reduce severity of common clock config message (Chris Packham)

   - Clear the correct bits when enabling L1 substates, so we don't go
     to the wrong state (Yicong Yang)

  Endpoint framework:

   - Replace EPF linkup ops with notifier call chain and improve locking
     (Kishon Vijay Abraham I)

   - Fix concurrent memory allocation in OB address region (Kishon Vijay
     Abraham I)

   - Move PF function number assignment to EPC core to support multiple
     function creation methods (Kishon Vijay Abraham I)

   - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)

   - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
     Offset (Kishon Vijay Abraham I)

   - Add support for testing DMA transfers (Kishon Vijay Abraham I)

   - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)

   - Add support for tests to clear IRQ (Kishon Vijay Abraham I)

   - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)

  Amlogic Meson PCIe controller driver:

   - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
     Pommarel)

   - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
     Pommarel)

  Cadence PCIe controller driver:

   - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
     Abraham I)

  Intel VMD host bridge driver:

   - Add two VMD Device IDs that require bus restriction mode (Sushma
     Kalakota)

  Mobiveil PCIe controller driver:

   - Refactor and modularize mobiveil driver (Hou Zhiqiang)

   - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)

  Microsoft Hyper-V host bridge driver:

   - Add support for Hyper-V PCI protocol version 1.3 and
     PCI_BUS_RELATIONS2 (Long Li)

   - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
     Feng)

   - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:

   - Use pci_parse_request_of_pci_ranges() (Rob Herring)

   - Add support for endpoint mode and related DT updates (Vidya Sagar)

   - Reduce -EPROBE_DEFER error message log level (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)

  Synopsys DesignWare PCIe controller driver:

   - Refactor core initialization code for endpoint mode (Vidya Sagar)

   - Fix endpoint MSI-X to use correct table address (Kishon Vijay
     Abraham I)

  TI DRA7xx PCIe controller driver:

   - Fix MSI IRQ handling (Vignesh Raghavendra)

  TI Keystone PCIe controller driver:

   - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)

  Miscellaneous:

   - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
     Feng)

   - Use ioremap(), not phys_to_virt(), for platform ROM to fix video
     ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"

* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
  misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
  PCI: tegra: Print -EPROBE_DEFER error message at debug level
  misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
  misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
  tools: PCI: Add 'e' to clear IRQ
  misc: pci_endpoint_test: Add ioctl to clear IRQ
  misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
  PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
  PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
  PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
  misc: pci_endpoint_test: Add support to get DMA option from userspace
  tools: PCI: Add 'd' command line option to support DMA
  misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
  PCI: endpoint: functions/pci-epf-test: Print throughput information
  PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
  PCI: pciehp: Fix MSI interrupt race
  PCI: pciehp: Fix indefinite wait on sysfs requests
  PCI: endpoint: Fix clearing start entry in configfs
  PCI: tegra: Add support for PCIe endpoint mode in Tegra194
  PCI: sysfs: Revert "rescan" file renames
  ...
2020-04-03 14:25:02 -07:00
Dan Williams f6d2b802f8 Merge branch 'for-5.7/libnvdimm' into libnvdimm-for-next
- Introduce 'zero_page_range' as a dax operation. This facilitates
  filesystem-dax operation without a block-device.

- Advertise a persistence-domain for of_pmem and papr_scm. The
  persistence domain indicates where cpu-store cycles need to reach in
  the platform-memory subsystem before the platform will consider them
  power-fail protected.

- Fixup some flexible-array declarations.
2020-04-02 19:55:17 -07:00
Dan Williams d3b88655c0 Merge branch 'for-5.7/numa' into libnvdimm-for-next
- Promote numa_map_to_online_node() to a cross-kernel generic facility.

- Save x86 numa information to allow for node-id lookups for reserved
  memory ranges, deploy that capability for the e820-pmem driver.

- Introduce phys_to_target_node() to facilitate drivers that want to
  know resulting numa node if a given reserved address range was
  onlined.
2020-04-02 19:50:31 -07:00
Dan Williams 91bf79bcb6 Merge branch 'for-5.6/libnvdimm-fixes' into libnvdimm-for-next
Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
2020-04-02 19:47:12 -07:00
Gayatri Kammela b62c770fee ACPI: Update Tiger Lake ACPI device IDs
Tiger Lake's new unique ACPI device IDs for DPTF and fan drivers are not
valid as the IDs are missing 'C'. Fix the IDs by updating them.

After the update, the new IDs should now look like
INT1047 --> INTC1047
INT1040 --> INTC1040
INT1043 --> INTC1043
INT1044 --> INTC1044

Fixes: 55cfe6a5c5 ("ACPI: DPTF: Add Tiger Lake ACPI device IDs")
Fixes: c248dfe7e0 ("ACPI: fan: Add Tiger Lake ACPI device ID")
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01 13:20:21 +02:00
Hans de Goede 1c8fbc1f9b ACPI: video: Use native backlight on Acer Aspire 5783z
The Acer Aspire 5783z shipped with Windows 7 and as such does not trigger
our "win8 ready" heuristic for prefering the native backlight interface.

Still ACPI backlight control doesn't work on this model, where as the
native (intel_video) backlight interface does work. Add a quirk to
force using native backlight control on this model.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-01 11:18:31 +02:00
Linus Torvalds 9b82f05f86 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "The main changes in this cycle were:

  Kernel side changes:

   - A couple of x86/cpu cleanups and changes were grandfathered in due
     to patch dependencies. These clean up the set of CPU model/family
     matching macros with a consistent namespace and C99 initializer
     style.

   - A bunch of updates to various low level PMU drivers:
       * AMD Family 19h L3 uncore PMU
       * Intel Tiger Lake uncore support
       * misc fixes to LBR TOS sampling

   - optprobe fixes

   - perf/cgroup: optimize cgroup event sched-in processing

   - misc cleanups and fixes

  Tooling side changes are to:

   - perf {annotate,expr,record,report,stat,test}

   - perl scripting

   - libapi, libperf and libtraceevent

   - vendor events on Intel and S390, ARM cs-etm

   - Intel PT updates

   - Documentation changes and updates to core facilities

   - misc cleanups, fixes and other enhancements"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
  cpufreq/intel_pstate: Fix wrong macro conversion
  x86/cpu: Cleanup the now unused CPU match macros
  hwrng: via_rng: Convert to new X86 CPU match macros
  crypto: Convert to new CPU match macros
  ASoC: Intel: Convert to new X86 CPU match macros
  powercap/intel_rapl: Convert to new X86 CPU match macros
  PCI: intel-mid: Convert to new X86 CPU match macros
  mmc: sdhci-acpi: Convert to new X86 CPU match macros
  intel_idle: Convert to new X86 CPU match macros
  extcon: axp288: Convert to new X86 CPU match macros
  thermal: Convert to new X86 CPU match macros
  hwmon: Convert to new X86 CPU match macros
  platform/x86: Convert to new CPU match macros
  EDAC: Convert to new X86 CPU match macros
  cpufreq: Convert to new X86 CPU match macros
  ACPI: Convert to new X86 CPU match macros
  x86/platform: Convert to new CPU match macros
  x86/kernel: Convert to new CPU match macros
  x86/kvm: Convert to new CPU match macros
  x86/perf/events: Convert to new CPU match macros
  ...
2020-03-30 16:40:08 -07:00
Linus Torvalds 6d90508121 ACPI updates for 5.7-rc1
- Update the ACPICA code in the kernel to the 20200214 upstream
    release including:
 
    * Fix to re-enable the sleep button after wakeup (Anchal Agarwal).
    * Fixes for mistakes in comments and typos (Bob Moore).
    * ASL-ASL+ converter updates (Erik Kaneda).
    * Type casting cleanups (Sven Barth).
 
  - Clean up the intialization of the EC driver and eliminate some
    dead code from it (Rafael Wysocki).
 
  - Clean up the quirk tables in the AC and battery drivers (Hans de
    Goede).
 
  - Fix the global lock handling on x86 to ignore unspecified bit
    positions in the global lock field (Jan Engelhardt).
 
  - Add a new "tiny" driver for ACPI button devices exposed by VMs to
    guest kernels to send signals directly to init (Josh Triplett).
 
  - Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
 
  - Make the ACPI PCI host bridge and fan drivers use scnprintf() to
    avoid potential buffer overflows (Takashi Iwai).
 
  - Clean up assorted pieces of code:
 
    * Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
    * Drop unneeded variable initialization (Colin Ian King).
    * Add missing __acquires/__releases annotations (Jules Irenge).
    * Replace list_for_each_safe() with list_for_each_entry_safe()
      (chenqiwu).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl6CCQASHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx15UQAISSZxFTq6huh9c3r0xEgddamhn7VOX+
 phjRuTmPzRn2RqFt7Q/ypiy5qqRgBko7oR0UyMJeHc7YPYcJ2nrRx/6Ymg46nmac
 mdIwTG3y1bH6cD/Fz8cM+9ZCtQl8iZRf36zvlY/8fNpk+Cj98et+x+wbUN8GMO9F
 9anHpPKk7hHCwxSN/SnyrJGJpjKdW057sv9sYwgR65XnM35dGxExQNjqtQVFk/ih
 N7TKVHUAlEE06liS0QYCeugsZsu5/GviU/1uy3qwg+Fxcxw7muHfG/impZwFhdjn
 QrdnFOGz9lFXzY+ynQplW0tJtt1AvOLJzQtzGVOxurTJIgz1pEJnptvDXFWP2YBX
 aESfuFt47bzi/NT1f31L3YQ3vuOJczwkS/QlDxv4TJh6rFdZFnQQNo+iIxBAlB6n
 xSsADFbZ3OaAU2VcjVn6WSL7iD3znnIBZp/xQIybb+9BUoDhSXCTH7rNT7p025cR
 g4KGAevlNDEVKIsZs3UHRQYpFQ+qHDM3WNiAiIEyF9cdenSXEMKrBnEYKSbV7DnI
 rBYexFTvjAyVEb6qnuaQDwHHKhu5Xc0JebIXeTjByg993Y8SFLll7a5d40H71S6Z
 /nG4mOa8+Qt6MqhwvkXLu/cxrXgNmnCG8W9RH0/2sQs25AMys9SESo1jsvEeCS2o
 tC2xCpKl2TlU
 =kQmH
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:

   - Update the ACPICA code in the kernel to the 20200214 upstream
     release including:

       * Fix to re-enable the sleep button after wakeup (Anchal
         Agarwal).

       * Fixes for mistakes in comments and typos (Bob Moore).

       * ASL-ASL+ converter updates (Erik Kaneda).

       * Type casting cleanups (Sven Barth).

   - Clean up the intialization of the EC driver and eliminate some dead
     code from it (Rafael Wysocki).

   - Clean up the quirk tables in the AC and battery drivers (Hans de
     Goede).

   - Fix the global lock handling on x86 to ignore unspecified bit
     positions in the global lock field (Jan Engelhardt).

   - Add a new "tiny" driver for ACPI button devices exposed by VMs to
     guest kernels to send signals directly to init (Josh Triplett).

   - Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).

   - Make the ACPI PCI host bridge and fan drivers use scnprintf() to
     avoid potential buffer overflows (Takashi Iwai).

   - Clean up assorted pieces of code:

       * Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).

       * Drop unneeded variable initialization (Colin Ian King).

       * Add missing __acquires/__releases annotations (Jules Irenge).

       * Replace list_for_each_safe() with list_for_each_entry_safe()
         (chenqiwu)"

* tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
  ACPICA: Update version to 20200214
  ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
  ACPI: fan: Use scnprintf() for avoiding potential buffer overflow
  ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
  ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
  ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
  ACPI: EC: Consolidate event handler installation code
  acpi/x86: ignore unspecified bit positions in the ACPI global lock field
  acpi/x86: add a kernel parameter to disable ACPI BGRT
  x86/acpi: make "asmlinkage" part first thing in the function definition
  ACPI: list_for_each_safe() -> list_for_each_entry_safe()
  ACPI: video: remove redundant assignments to variable result
  ACPI: OSL: Add missing __acquires/__releases annotations
  ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
  ACPI / AC: Cleanup DMI quirk table
  ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
  ACPI: EC: Simplify acpi_ec_add()
  ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
  ACPI: EC: Avoid passing redundant argument to functions
  ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()
  ...
2020-03-30 15:17:04 -07:00
Rafael J. Wysocki 1da28f0323 Merge branches 'acpi-ec', 'acpi-fan' and 'acpi-pci'
* acpi-ec:
  ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
  ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
  ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
  ACPI: EC: Consolidate event handler installation code
  ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
  ACPI: EC: Simplify acpi_ec_add()
  ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
  ACPI: EC: Avoid passing redundant argument to functions
  ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()

* acpi-fan:
  ACPI: fan: Use scnprintf() for avoiding potential buffer overflow

* acpi-pci:
  ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
2020-03-30 14:55:01 +02:00
Rafael J. Wysocki f94a57a189 Merge branches 'acpi-button', 'acpi-battery', 'acpi-osl', 'acpi-video' and 'acpi-misc'
* acpi-button:
  ACPI: Add new tiny-power-button driver to directly signal init
  ACPI: button: move HIDs to acpi/button.h

* acpi-battery:
  ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
  ACPI / AC: Cleanup DMI quirk table

* acpi-osl:
  ACPI: OSL: Add missing __acquires/__releases annotations

* acpi-video:
  ACPI: video: remove redundant assignments to variable result

* acpi-misc:
  ACPI: list_for_each_safe() -> list_for_each_entry_safe()
2020-03-30 14:54:01 +02:00
Rafael J. Wysocki 6d582d7e31 Merge branch 'acpica'
* acpica:
  ACPICA: Update version to 20200214
  ACPICA: Fix a couple of typos
  ACPICA: use acpi_size instead of u32 for prefix_path_length
  ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32
  ACPICA: cast the result of the pointer difference to u32
  ACPICA: Table Manager: Update comments in a function header
  ACPICA: Enable sleep button on ACPI legacy wake
  ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events.
  ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree
  ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()
2020-03-30 14:53:36 +02:00
Bob Moore 9a1ae80412 ACPICA: Fixes for acpiExec namespace init file
This is the result of squashing the following ACPICA commit ID's:
6803997e5b4f3635cea6610b51ff69e29d251de3
f31cdf8bfda22fe265c1a176d0e33d311c82a7f7

This change fixes several problems with the support for the
acpi_exec namespace init file (-fi option). Specifically, it
fixes AE_ALREADY_EXISTS errors, as well as various seg faults.

Link: https://github.com/acpica/acpica/commit/f31cdf8b
Link: https://github.com/acpica/acpica/commit/6803997e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30 14:52:33 +02:00
Cezary Rojewski 88055d8f4a ACPICA: Add NHLT table signature
ACPICA commit 422166b656565d180bb3aac712009bdce5e70cdd

NHLT (Non-HDAudio Link Table) provides configuration of audio
endpoints for Intel SST (Smart Sound Technology) DSP products.
Similarly to other ACPI tables, data provided by BIOS may not
describe it correctly, thus overriding is required.

ACPI override mechanism checks for unknown signature before
proceeding. Update known signatures array to support NHLT.

Link: https://github.com/acpica/acpica/commit/422166b6
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30 14:52:33 +02:00
John Levon bb89a79ac6 ACPICA: utilities: fix sprintf()
This contains changes for the following ACPICA commit ID's:
8f99a6ccd3b8e5c3d3d68c53fdbb054c2477eeb4
d30647af53abd334cbcf6362387464ea647bac9e
d3c5fb4cf5b2880d789c987eb847fc3de3774abc

On 32-bit, the provided sprintf() is non-functional: with a size of
ACPI_UINT32_MAX, String + Size will wrap, meaning End < Start, and
acpi_ut_bound_string_output() will never output anything as a result.

The symptom we saw of this was acpixtract failing to output anything.

Link: https://github.com/acpica/acpica/commit/8f99a6cc
Link: https://github.com/acpica/acpica/commit/d30647af
Link: https://github.com/acpica/acpica/commit/d3c5fb4c
Signed-off-by: MSathieu <18145111+MSathieu@users.noreply.github.com>
Signed-off-by: John Levon <john.levon@joyent.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30 14:52:32 +02:00
Erik Kaneda f2173c3e7d ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA commit 825c53661cacc7e3dab4844588201846143bd1b7

This variable was re-defined in a file specific to acpiexec. Remove
the redundant declaration and move the initialize to the debugger.

Patch based on suggestions by David Seifert and Benjamin Berg.

Link: https://github.com/acpica/acpica/commit/825c5366
Reported-by: David Seifert <soap@gentoo.org>
Reported-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30 14:52:32 +02:00
Erik Kaneda 26b22d7999 ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA commit 811e69a59cb4189ebf8b882eba74c881f598a239

The former was proposed during specification discussions but it was
dropped. This keyword was introduced to the ACPICA code base by
mistake so this commit changes the keyword representing Platform
Communication Channel to be PCC.

Link: https://github.com/acpica/acpica/commit/811e69a5
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30 14:52:32 +02:00
Rafael J. Wysocki ada0629bd3 Merge branches 'pm-core', 'pm-sleep', 'pm-acpi' and 'pm-domains'
* pm-core:
  PM: runtime: Add pm_runtime_get_if_active()

* pm-sleep:
  PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
  PM / hibernate: Remove unnecessary compat ioctl overrides
  PM: hibernate: fix docs for ioctls that return loff_t via pointer
  PM: sleep: wakeup: Use built-in RCU list checking
  PM: sleep: core: Use built-in RCU list checking

* pm-acpi:
  ACPI: PM: s2idle: Refine active GPEs check
  ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
  ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()

* pm-domains:
  cpuidle: psci: Split psci_dt_cpu_init_idle()
  PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
2020-03-30 14:46:58 +02:00
Kuppuswamy Sathyanarayanan ac1c8e35a3 PCI/DPC: Add Error Disconnect Recover (EDR) support
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to
notify OSPM that a device has been disconnected due to an error condition
(ACPI v6.3, sec 5.6.6).  OSPM advertises its support for EDR on PCI devices
via _OSC (see [1], sec 4.5.1, table 4-4).  The OSPM EDR notify handler
should invalidate software state associated with disconnected devices and
may attempt to recover them.  OSPM communicates the status of recovery to
the firmware via _OST (sec 6.3.5.2).

For PCIe, firmware may use Downstream Port Containment (DPC) to support
EDR.  Per [1], sec 4.5.1, table 4-6, even if firmware has retained control
of DPC, OSPM may read/write DPC control and status registers during the EDR
notification processing window, i.e., from the time it receives an EDR
notification until it clears the DPC Trigger Status.

Note that per [1], sec 4.5.1 and 4.5.2.4,

  1. If the OS supports EDR, it should advertise that to firmware by
     setting OSC_PCI_EDR_SUPPORT in _OSC Support.

  2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request
     control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in
     _OSC Support.

Add an EDR notify handler to attempt recovery.

[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
    affecting PCI Firmware Specification, Rev. 3.2
    https://members.pcisig.com/wg/PCI-SIG/document/12888

[bhelgaas: squash add/enable patches into one]
Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
2020-03-28 13:19:04 -05:00
Liguang Zhang b17b806454 ACPI: CPPC: clean up acpi_get_psd_map()
In acpi_get_psd_map() variable all_cpu_data[] can't be NULL and variable
match_cpc_ptr has been checked before, no need check again at the end of
the funchtion.

Some additional optimizations can be made on top of that.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-28 13:25:41 +01:00
Joerg Roedel ff68eb2330 Merge branches 'iommu/fixes', 'arm/qcom', 'arm/omap', 'arm/smmu', 'x86/amd', 'x86/vt-d', 'virtio' and 'core' into next 2020-03-27 11:33:27 +01:00
Joerg Roedel 6990ec796a ACPI/IORT: Remove direct access of dev->iommu_fwspec
Use the accessor functions instead of directly dereferencing
dev->iommu_fwspec.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200326150841.10083-3-joro@8bytes.org
2020-03-27 11:12:19 +01:00
Gustavo A. R. Silva 4b56640608 ACPI: NFIT: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20200319195046.GA452@embeddedor.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-03-25 17:08:42 -07:00
Ingo Molnar 629b3df7ec Merge branch 'x86/cpu' into perf/core, to resolve conflict
Conflicts:
	arch/x86/events/intel/uncore.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-25 15:20:44 +01:00
Rafael J. Wysocki d5406284ff ACPI: PM: s2idle: Refine active GPEs check
The check for any active GPEs added by commit fdde0ff859 ("ACPI:
PM: s2idle: Prevent spurious SCIs from waking up the system") turns
out to be insufficiently precise to prevent some systems from
resuming prematurely due to a spurious EC wakeup, so refine it
by first checking if any GPEs other than the EC GPE are active
and skipping all of the SCIs coming from the EC that do not produce
any genuine wakeup events after processing.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629
Fixes: fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Reported-by: Ondřej Caletka <ondrej@caletka.cz>
Tested-by: Ondřej Caletka <ondrej@caletka.cz>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-25 12:57:27 +01:00
Rafael J. Wysocki 0ce792d660 ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
The check carried out by acpi_any_gpe_status_set() is not precise enough
for the suspend-to-idle implementation in Linux and in some cases it is
necessary make it skip one GPE (specifically, the EC GPE) from the check
to prevent a race condition leading to a premature system resume from
occurring.

For this reason, redefine acpi_any_gpe_status_set() to take the number
of a GPE to skip as an argument.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629
Tested-by: Ondřej Caletka <ondrej@caletka.cz>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-25 12:57:27 +01:00
Thomas Gleixner e36cf2f768 ACPI: Convert to new X86 CPU match macros
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.

Rename the local macro wrapper to X86_MATCH for consistency. It stays for
readability sake.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131509.467730627@linutronix.de
2020-03-24 21:30:50 +01:00
Rafael J. Wysocki 243a98894d ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
Fix a comment in acpi_s2idle_prepare_late() that has become outdated
after commit f0ac20c3f6 ("ACPI: EC: Fix flushing of pending work").

Fixes: f0ac20c3f6 ("ACPI: EC: Fix flushing of pending work")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-22 07:59:00 +01:00
Joerg Roedel 763802b53a x86/mm: split vmalloc_sync_all()
Commit 3f8fd02b1b ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path.  While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.

Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap().  But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.

To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:

	* vmalloc_sync_mappings(), and
	* vmalloc_sync_unmappings()

Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized.  The only exception is the new call-site added in the
above mentioned commit.

Shile Zhang directed us to a report of an 80% regression in reaim
throughput.

Fixes: 3f8fd02b1b ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	[GHES]
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org
Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/
Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-21 18:56:06 -07:00
Dan Williams a0e374525d libnvdimm/region: Introduce NDD_LABELING
The NDD_ALIASING flag is used to indicate where pmem capacity might
alias with blk capacity and require labeling. It is also used to
indicate whether the DIMM supports labeling. Separate this latter
capability into its own flag so that the NDD_ALIASING flag is scoped to
true aliased configurations.

To my knowledge aliased configurations only exist in the ACPI spec,
there are no known platforms that ship this support in production.

This clarity allows namespace-capacity alignment constraints around
interleave-ways to be relaxed.

Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/158041477856.3889308.4212605617834097674.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-03-17 12:23:21 -07:00
Takashi Iwai edd6608644 ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 11:15:10 +01:00
Takashi Iwai 949fe25f2a ACPI: fan: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Also adjust the argument to really match with the actually remaining
buffer size.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 11:11:58 +01:00
Rafael J. Wysocki b1e14999a4 ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
The EC_FLAGS_QUERY_HANDSHAKE switch is never set in the current
code (the only function setting it is defined under #if 0) and
has no effect whatever, so eliminate it and drop the code
depending on it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 11:04:17 +01:00
Rafael J. Wysocki 65a691f5f8 ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
The reason for clearing boot_ec_is_ecdt in acpi_ec_add() (if a
PNP0C09 device object matching the ECDT boot EC had been found in
the namespace) was to cause acpi_ec_ecdt_start() to return early,
but since the latter does not look at boot_ec_is_ecdt any more,
acpi_ec_add() need not clear it.

Moreover, doing that may be confusing as it may cause "DSDT" to be
printed instead of "ECDT" in the EC initialization completion
message, so stop doing it.

While at it, split the EC initialization completion message into
two messages, one regarding the boot EC and another one printed
regardless of whether or not the EC at hand is the boot one.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 11:04:17 +01:00
Rafael J. Wysocki 98ada3c59d ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
Notice that the return value of acpi_ec_init() is discarded anyway,
so it can be void and it doesn't need to check the return values of
acpi_bus_register_driver() and acpi_ec_ecdt_start() called by it.
Thus the latter can be void too and it really has nothing to do
if acpi_ec_add() has already found an EC matching the boot one in the
namespace.  Also, acpi_ec_ecdt_get_handle() can be folded into it.

Modify the code accordingly and while at it create a propoer kerneldoc
comment to document acpi_ec_ecdt_start() and move the remark regarding
ASUS X550ZE along with the related bug URL from acpi_ec_init() into
that comment.

Additionally, fix up a stale comment in acpi_ec_init().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 11:04:17 +01:00
Rafael J. Wysocki 03e9a0e057 ACPI: EC: Consolidate event handler installation code
Commit 406857f773 ("ACPI: EC: add support for hardware-reduced
systems") made ec_install_handlers() return an error on failures
to configure a GPIO IRQ for the EC, but that is inconsistent with
the handling of the GPE event handler installation failures even
though it is exactly the same issue and the driver can respond to
it in the same way in both cases (the EC can be actively polled
for events through its registers if the event handler installation
fails).

Moreover, it requires acpi_ec_add() to take that special case into
account and disagrees with the ec_install_handlers() header comment.

For this reason, rework the event handler installation code in
ec_install_handlers() to explicitly take deferred probing (that
may be needed in the GPIO IRQ case) into account and to avoid
failing the EC initialization in any other case.

Among other things, reduce code duplication between
install_gpe_event_handler() and install_gpio_irq_event_handler() by
moving some code from there into ec_install_handlers() itself and
simplify the error code path in acpi_ec_add().

While at it, turn the ec_install_handlers() header comment into
a proper kerneldoc one and add some general control flow information
to it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Jian-Hong Pan <jian-hong@endlessm.com>
2020-03-14 10:59:44 +01:00
chenqiwu 07761a4cd4 ACPI: list_for_each_safe() -> list_for_each_entry_safe()
Replace list_for_each_safe() and open-coded list entry address
computations with list_for_each_entry_safe() in several places to
simplify code.

Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04 10:48:00 +01:00
Colin Ian King 966f58df17 ACPI: video: remove redundant assignments to variable result
The variable result is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04 10:43:04 +01:00
Jules Irenge 2288eba5ca ACPI: OSL: Add missing __acquires/__releases annotations
Sparse reports a warnings at acpi_os_acquire_lock() and
acpi_os_release_lock():

warning: context imbalance in acpi_os_acquire_lock() - unexpected unlock

warning: context imbalance in acpi_os_release_lock() - unexpected unlock

which result from missing __acquires/__releases annotations.

Add the annotations as appropriate to get rid of the warnings.

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
[ rjw: Two patches merged into one, subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04 10:40:48 +01:00
Hans de Goede 8c3f6993c2 ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
The Lenovo Ideapad Miix 320 bat_dmi_table entry is using weird indentation
and is the only entry which (unnecessarily) uses DMI_EXACT_MATCH instead
of DMI_MATCH, fixup both to make the entry consistent with the others.

While at it also update the comments for battery_do_not_check_pmic_quirk
entries, adding a bit of text explaining why the quirk is necessary.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04 10:32:50 +01:00
Hans de Goede 04900fa3ab ACPI / AC: Cleanup DMI quirk table
The 3 different entries we have sofar all use different identation and
2 of the use DMI_MATCH where as 1 unnecessarily used DMI_EXACT_MATCH
Fix this to just use full tab idents for each level and DMI_MATCH
everywhere and sort the entries alphabetically.

Also add a bit of text to the comments explaining why the quirk is
necessary.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-04 10:32:50 +01:00
Rafael J. Wysocki 3d9b8dd832 ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
If the boot EC comes from the DSDT, its ACPI handle is equal to the
handle of a device object with the PNP0C09 device ID.  If that
device object is passed to acpi_ec_add(), it is not necessary to
allocate a new EC structure for it and parse it, because that has
been done already, so change the function to use the fast path in
that case.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-02 11:25:21 +01:00
Rafael J. Wysocki e3cfabcd73 ACPI: EC: Simplify acpi_ec_add()
First, notice that if the device ID in acpi_ec_add() is equal to
ACPI_ECDT_HID, boot_ec_is_ecdt must be set, because this means
that the device object passed to acpi_ec_add() comes from
acpi_ec_ecdt_start() which fails if boot_ec_is_ecdt is unset.
Accordingly, boot_ec_is_ecdt need not be set again in that case,
so drop that redundant update of it from the code.

Next, ec->handle must be a valid ACPI handle right before
returning 0 from acpi_ec_add(), because it either is the handle
of the device object passed to that function, or it is the boot EC
handle coming from acpi_ec_ecdt_start() which fails if it cannot
find a valid handle for the boot EC.  Moreover, the object with
that handle is regarded as a valid representation of the EC in all
cases, so there is no reason to avoid the _DEP list update walk if
that handle is the boot EC handle.  Accordingly, drop the dep_update
local variable from acpi_ec_add() and call acpi_walk_dep_device_list()
for ec->handle unconditionally before returning 0 from it.

Finally, the ec local variable in acpi_ec_add() need not be
initialized to NULL and the status local variable declaration
can be moved to the block in which it is used, so change the code
in accordance with these observations.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-02 11:25:13 +01:00
Dan Carpenter 01091c496f acpi/nfit: improve bounds checking for 'func'
The 'func' variable can come from the user in the __nd_ioctl().  If it's
too high then the (1 << func) shift in acpi_nfit_clear_to_send() is
undefined.  In acpi_nfit_ctl() we pass 'func' to test_bit(func, &dsm_mask)
which could result in an out of bounds access.

To fix these issues, I introduced the NVDIMM_CMD_MAX (31) define and
updated nfit_dsm_revid() to use that define as well instead of magic
numbers.

Fixes: 11189c1089 ("acpi/nfit: Fix command-supported detection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20200225161927.hvftuq7kjn547fyj@kili.mountain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-02-28 18:21:52 -08:00
Linus Torvalds c60c040213 ACPI fixes for 5.6-rc4
Fix a couple of configuration issues in the ACPI watchdog (WDAT)
 driver (Mika Westerberg) and make it possible to disable that
 driver at boot time in case it still does not work as
 expected (Jean Delvare).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl5Y6UYSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxj7YP/1qVMcIJo3CcItiQVV7+2S+WS+kK+Rf8
 t6g+8F5KL0DBrDqji7l19kv0O+kPpn2uGnREcNk3T3mHEu0jSywghvBI+nzrym2P
 Q+p2+2Fryy5zgiNTyhq7imA3IH4Zw5CVt6GRJjITvzFwhMGM38NQsDUbZEpZtJrz
 HTVQyqPgmhvox5sa2Qk1+vZOtclWlkPenWmtJEs8m+Pg8w+Ejfs4Lj+CQYlI5RB8
 GGhTgBiBMS7A80yTVxl8LULsrini6PWAGGY2yMScwDUYNZTAUuT8QSUx4/QBmyyP
 U5K1sIK2pd/JuE2QqSBztrYC7x1fpfoBJylF8B0HK5uNBpZth7eXhe6t+xDYVTpw
 U31unYfmcx6UT47lF/yWWNuhP6EDvdvZ0Xx4DHlgBJqKNuyfhz4Uazsr7HyLi2sI
 /YrBPimtgvICFHYorrNVwEheTUEp+QXtNZp6aTugLGVX6zbQ3nZp7ajifNO7hdsQ
 K+IjjRgH/YsVi9GQY/U3A/zTO+39fSupQgKiH33pG8Yp5bZbreoo1kPKzlnt23JJ
 DXuaN7wH74sgT2EqZm30lFapF/0wv+iIpdWmorlE/4WwTwIeDck/ULeBiGFqpUI6
 9Di10O6w+TJ+VevyJ5Hqkzukjlj93Vq+kCY8eOiWVpTga2ieQiYKFSbxDPE3OC1k
 j2wkDwKqkh0o
 =eIlw
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "Fix a couple of configuration issues in the ACPI watchdog (WDAT)
  driver (Mika Westerberg) and make it possible to disable that driver
  at boot time in case it still does not work as expected (Jean
  Delvare)"

* tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: watchdog: Set default timeout in probe
  ACPI: watchdog: Fix gas->access_width usage
  ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
  ACPI: watchdog: Allow disabling WDAT at boot
2020-02-28 09:02:18 -08:00
Rafael J. Wysocki 7247f0c24c ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
If the status value returned by acpi_install_address_space_handler()
in ec_install_handlers() is AE_NOT_FOUND, it is treated in a special
way, apparently because it might mean a _REG method evaluation
failure (at least that is the case according to the comment in
there), but acpi_install_address_space_handler() does not take
_REG evaluation errors into account at all, so the AE_NOT_FOUND
special handling is confusing at best.

For this reason, change ec_install_handlers() to stop the EC and
return -ENODEV on all acpi_install_address_space_handler() errors.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-27 22:56:28 +01:00
Rafael J. Wysocki a2b691772a ACPI: EC: Avoid passing redundant argument to functions
After commit 406857f773 ("ACPI: EC: add support for hardware-reduced
systems") the handle_events argument passed to ec_install_handlers()
and acpi_ec_setup() is redundant, because it is always 'false' when
the device argument passed to them in NULL and it is always 'true'
otherwise, so the device argument can be tested against NULL instead
of testing the handle_events one.

Accordingly, modify ec_install_handlers() and acpi_ec_setup() to take
two arguments and reduce the number of checks in the former.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-27 22:55:22 +01:00
Rafael J. Wysocki c823c17a8e ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()
It doesn't really make sense to pass ec->handle of the ECDT EC to
acpi_handle_info(), because it is set to ACPI_ROOT_OBJECT in
acpi_ec_ecdt_probe(), so rework acpi_ec_setup() to avoid using
acpi_handle_info() for printing messages.

First, notice that the "Used as first EC" message is not really
useful, because it is immediately followed by a more meaningful one
from either acpi_ec_ecdt_probe() or acpi_ec_dsdt_probe() (the latter
also includes the EC object path), so drop it altogether.

Second, use pr_info() for printing the EC configuration information.

While at it, make the code in question avoid printing invalid GPE or
IRQ numbers and make it print the GPE/IRQ information only when the
driver is ready to handle events.

Fixes: 72c77b7ea9 ("ACPI / EC: Cleanup first_ec/boot_ec code")
Fixes: 406857f773 ("ACPI: EC: add support for hardware-reduced systems")
Cc: 5.5+ <stable@vger.kernel.org> # 5.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-27 22:51:36 +01:00
Rafael J. Wysocki 63fb962342 ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()
Commit fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") overlooked the fact that fixed events can wake
up the system too and broke RTC wakeup from suspend-to-idle as a
result.

Fix this issue by checking the fixed events in acpi_s2idle_wake() in
addition to checking wakeup GPEs and break out of the suspend-to-idle
loop if the status bits of any enabled fixed events are set then.

Fixes: fdde0ff859 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21 10:01:25 -08:00
Dan Williams b2ca916ce3 ACPI: NUMA: Up-level "map to online node" functionality
The acpi_map_pxm_to_online_node() helper is used to find the closest
online node to a given proximity domain. This is used to map devices in
a proximity domain with no online memory or cpus to the closest online
node and populate a device's 'numa_node' property. The numa_node
property allows applications to be migrated "close" to a resource.

In preparation for providing a generic facility to optionally map an
address range to its closest online node, or the node the range would
represent were it to be onlined (target_node), up-level the core of
acpi_map_pxm_to_online_node() to a generic mm/numa helper.

Cc: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/158188324802.894464.13128795207831894206.stgit@dwillia2-desk3.amr.corp.intel.com
2020-02-17 10:49:06 -08:00
Bob Moore 54a2a15a56 ACPICA: Fix a couple of typos
Squashed ACPICA commit e93a53d4d312a83a3ec72aa9cfb12d781b4fefca
and df52c574572344cd9095b66a0f580d51249deb2a

Submitted by: ehaouas@noos.fr

Link: https://github.com/acpica/acpica/commit/e93a53d4
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-16 10:19:53 +01:00
Sven Barth a34991fdf4 ACPICA: use acpi_size instead of u32 for prefix_path_length
strlen() returns a size_t, so use acpi_size instead of u32 for
prefix_path_length.

ACPICA commit 0f64c317e769a63679442404421da1d5bd61068a

Link: https://github.com/acpica/acpica/commit/0f64c317
Signed-off-by: Sven Barth <sb@miray.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-16 10:19:53 +01:00
Sven Barth 8dbb75ce33 ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32
ACPICA commit d216e4c8d886d7fb82697948c4fee8a5777a1a5a

Link: https://github.com/acpica/acpica/commit/d216e4c8
Signed-off-by: Sven Barth <sb@miray.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-16 10:19:53 +01:00
Sven Barth 45bbbbe2d5 ACPICA: cast the result of the pointer difference to u32
Altnatively we could declare aml_length as acpi_size, but then one
would need to cast at the assignment for method_obj->method.aml_length

ACPICA commit 72805936603fcf84e98f1b89bf99b5101af27fb8

Link: https://github.com/acpica/acpica/commit/72805936
Signed-off-by: Sven Barth <sb@miray.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-02-16 10:19:53 +01:00