Allow to set the over-provision percentage on target creation. In case
that the value is not provided, fall back to the default value set by
the target.
In pblk, set the default OP to 11% of the total size of the device
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Until now, pblk's rate-limiter has used a heuristic to reserve space for
GC I/O given that the over-provision area was fixed.
In preparation for allowing to define the over-provision area on target
creation, define a dedicated free_block counter in the rate-limiter to
track the number of blocks being used for user data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk_gc_stop just sets pblk->gc->gc_active to zero, ignoring
the flush parameter. This is plain confusing, so remove the
function and set the gc active flag at the call points instead.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unless we protect flush pointer updates with a lock, we risk
resetting new flush points before we've synced all sectors
up to that point.
This patch protects new flush points with the same spin lock
that is being held when advancing the sync pointer and
resetting completed flush points.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move completion of syncs and clearing of flush points to the
write completion path - this ensures that the data has been
comitted to the media before completing bios containing syncs.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sync point is a really confusing name for keeping track of
the last entry that needs to be flushed so change the name
to to flush_point instead.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently pblk_recov_get_lba list does two separate things:
it checks the consistency of the emeta and extracts the lba list.
This patch separates the consistency check to make the code easier
to read and to prepare for version checks of the line emeta
persistent data format version.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Through time, we have generated some redundant helper functions.
Refactor them to eliminate redundant and unnecessary code. Also, reorder
them to improve readability
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Until now, target unique naming is only guaranteed per device. This is
ok from a lightnvm perspective, but not from a sysfs one, since groups
will collide regardless of the underlying device.
Check that names are unique across all lightnvm-capable devices.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor target type lookup to use/not use locks explicitly instead of
using a hidden parameter to make the function locking.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for the 2.0 revision by adapting the geometry
structures to coexist with the 1.2 revision.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The lower page table is unused. All page tables reported by 1.2
devices are all reporting a sequential 1:1 page mapping. This is
also not used going forward with the 2.0 revision.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that rrpc have been removed. Also remove the hybrid 1.2 support
from the core.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that rrpc has been removed, the only users of the ppa helpers
is pblk. However, pblk already defines similar functions.
Switch pblk to use the internal ones, and remove the generic ppa
helpers.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The hybrid mode for 1.2 revision was deprecated, and have
no users. Remove to make it easier to move to the 2.0 revision.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: linux-block@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A previous patch inadvertently left an unused test function in the
header, kill it.
Fixes: 8bd400204b ("lightnvm: pblk: cleanup unused and static functions")
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph correctly points out that this issue is no different
for other block devices, and poking at cross layer internals
is not the right way to solve it.
This reverts commit bb6aa6f082.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement a generic path for sending sync I/O on LightNVM. This allows
to reuse the standard synchronous path trough blk_execute_rq(), instead
of implementing a wait_for_completion on the target side (e.g., pblk).
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The amount of GC I/O on the write buffer is managed by the rate-limiter,
which is calculated as a function of the number of available free
blocks. When reaching the stable point, we risk having scheduled more
I/Os for GC than are allowed on the write buffer. This would result on
the GC semaphore balancing the outstanding read GC I/Os to be reported
as "hung", though the behavior is normal.
Solve this by allowing to schedule when we detect that the read GC path
is not moving forward.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cleanup up unused and static functions across the whole codebase.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lockdep complains about being in atomic context while freeing line
metadata - and rightly so as we take a spinlock and end up calling
vfree that might sleep(in pblk_mfree).
There is no need for holding the line manager free_lock while
freeing line metadata as the pipeline as stopped, so remove the lock.
Fixes: 588726d3ec ("lightnvm: pblk: fail gracefully on irrec. error")
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During garbage collect, lbas being written can end up
being invalidated. Make sure that this is reflected in
the valid lba count.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Finish garbage collect of the lines that are in the gc pipeline
before exiting. Ensure that all lines already in in the pipeline
goes through, from read to write.
Do this by keeping track of how many lines are in the pipeline
and waiting for that number to reach zero before exiting the gc
reader task.
Since we're adding a new gc line counter, change the name of
inflight_gc to read_inflight_gc to make the distinction clear.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Print the CRC of the logical-to-physical mapping during exit and
after recovering the L2P table to facilitate detection of meta
data corruption/recovery issues.
The CRC printed after recovery should match the CRC printed during
the previous exit - if it doesn't this indicates that either the meta
data written to the disk is corrupt or recovery failed.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Shut down the GC workqueues and tasks in the right order.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When recovering lines we need to consider that bad blocks in a line
affect the emeta area size.
Previously it was assumed that the emeta area would grow by the
number of sectors per page * number of bad blocks in the line.
This assumption is not correct - the number of "extra" pages that are
consumed could be both smaller (depending on emeta size) and bigger
(depending on the placement of the bad blocks).
Fix this by calculating the emeta start by iterating backwards
through the line, skipping ppas that map to bad blocks.
Also fix the data types used for ppa indices/counts in
pblk_recov_l2p_from_emeta - we should use u64.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Start GC if needed, directly after init, as we might
need to garbage collect in order to make room for user writes.
Create a helper function that allows to kick GC without exposing the
internals of the GC/rate-limiter interaction.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When rebuilding the L2P table, any full lines (lines without any
valid sectors) will be identified. If these lines are not freed,
we risk not being able to allocate the first data line.
This patch refactors the part of GC that frees empty lines
into a separate function and adds a call to this after the
L2P table has been rebuilt.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When recovering partially written lines, the valid sector
count must be decreased by the number of padded sectors
in the line.
Update line recovery to take all ADDR_EMPTY(padded) sectors
into account.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
GC can be kicked after it has been shut down when closing the last
line during exit, resulting in accesses to freed structures.
Make sure that GC is not triggered while it is not operational.
Also make sure that GC won't be re-activated during exit when
running on another processor by using timer_del_sync.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already pass the structure pointer so no need to pass the member.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not all exported symbols are being used outside core and there were
some stale entries in lightnvm.h
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vblk isn't being used anyway and if we ever have a usecase we can
introduce this again. This makes the logic easier and removes
unnecessary checks.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk_line_gc_list seems to had a bug since the introduction of pblk in
getting GC list for a line. In b20ba1bc7 while redesigning the GC
algorithm, the naming for the GC thresholds was altered, but the
values for high_thrs and mid_thrs were not. The result is that when
moving to the GC lists, the mid threshold is never evaluated.
Fixes: a4bd217b4("lightnvm: physical block device (pblk) target")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure that the variable controlling block threshold for allocating
extra metadata sectors in case of a line with bad blocks does not get a
negative value. Otherwise, the line will be marked as corrupted and
wasted.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Metadata I/Os are scheduled to minimize their impact on user data I/Os.
When there are enough LUNs instantiated (i.e., enough bandwidth), it is
easy to interleave metadata and data one after the other so that
metadata I/Os are the ones being blocked and not vice-versa.
We do this by calculating the distance between the I/Os in terms of the
LUNs that are not in used, and selecting a free LUN that satisfies a
the simple heuristic that metadata is scheduled behind. The per-LUN
semaphores guarantee consistency. This works fine on >1 LUN
configuration. However, when a single LUN is instantiated, this design
leads to a deadlock, where metadata waits to be scheduled on a free LUN.
This patch implements the 1 LUN case by simply scheduling the metadada
I/O after the data I/O. In the process, we refactor the way a line is
replaced to ensure that metadata writes are submitted after data writes
in order to guarantee block sequentiality. Note that, since there is
only one LUN, both I/Os will block each other by design. However, such
configuration only pursues tight read latencies, not write bandwidth.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk schedules user I/O, metadata I/O and erases on the write path in
order to minimize collisions at the media level. Until now, there has
been a dependency between user and metadata I/Os that could lead to a
deadlock as both take the per-LUN semaphore to schedule submission.
This path removes this dependency and guarantees forward progress at a
per I/O granurality.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A partial read I/O in pblk is an I/O where some sectors reside in the
write buffer in main memory and some are persisted on the device. Such
an I/O must at least contain 2 lbas, therefore checking for the case
where a single lba is mapped is not necessary.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a line is recycled during garbage collection, reads can still be
issued to the line. If the line is freed in the middle of this process,
data corruption might occur.
This patch guarantees that lines are not freed in the middle of reads
that target them (lines). Specifically, we use the existing line
reference to decide when a line is eligible for being freed after the
recycle process.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As part of pblk's recovery scheme, we store the lba mapped to each
physical sector on the device's out-of-bound (OOB) area.
On the read path, we can use this information to validate that the data
being delivered to the upper layers corresponds to the lba being
requested. The cost of this check is an extra copy on the DMA region on
the device and an extra comparison in the host, given that (i) the OOB
area is being read together with the data in the media, and (ii) the DMA
region allocated for the ppa list can be reused for the metadata stored
on the OOB area.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For consistency with the rest of pblk, use rqd->end_io to point to the
function taking care of ending the request on the completion path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor the rqd allocation and free functions so that all I/O types can
use these helper functions.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Each request type sent to the LightNVM subsystem requires different
metadata. Until now, we have tailored this metadata based on write, read
and erase commands. However, pblk uses different metadata for internal
writes that do not hit the write buffer. Instead of abusing the metadata
for reads, create a new request type - internal write to improve
code readability.
In the process, create internal values for each I/O type instead of
abusing the READ/WRITE macros, as suggested by Christoph.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wait until we know the exact number of ppas to be sent to the device,
before allocating the bio.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On REQ_PREFLUSH, directly tag the I/O context flags to signal a flush in
the write to cache path, instead of finding the correct entry context
and imposing a memory barrier. This simplifies the code and might
potentially prevent race conditions when adding functionality to the
write path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify put bio by doing it on bio end_io instead of manually putting
it on the completion path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the part of the garbage collector where data is read from the
line being recycled and moved into an internal queue before being copied
to the memory buffer. This allows to get rid of a dedicated function,
which introduces an unnecessary dependency on the code.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a line is selected for recycling by the garbage collector (GC), the
line state changes and the invalid bitmap is frozen, preventing
invalidations from happening. Throughout the GC, the L2P map is checked
to verify that not data being recycled has been updated. The last check
is done before the new map is being stored on the L2P table. Though
this algorithm works, it requires a number of corner cases to be checked
each time the L2P table is being updated. This complicates readability
and is error prone in case that the recycling algorithm is modified.
Instead, this patch makes the invalid bitmap accessible even when the
line is being recycled. When recycled data is being remapped, it is
enough to check the invalid bitmap for the line before updating the L2P
table.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normalize the way we name ppa variables to improve code readability.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a constant to set the maximum number of inflight GC requests
allowed.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As part of the mempool audit on pblk, remove unnecessary mempool
allocation checks on mempools.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk holds two sector bitmaps: one to keep track of the mapped sectors
while the line is active and another one to keep track of the invalid
sectors. The latter is kept during the whole live of the line, until it
is recycled. Since we cannot guarantee forward progress for the mempool
in this case, get rid of the mempool and simply allocate memory through
kmalloc.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since read and erase paths offer different guarantees for inflight I/Os,
separate the mempools to set the right min_nr for each on creation.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In pblk, we have a mempool to allocate a generic structure that we
pass along workqueues. This is heavily used in the GC path in order
to have enough inflight reads and fully utilize the GC bandwidth.
However, the current GC path copies data to the host memory and puts it
back into the write buffer. This requires a vmalloc allocation for the
data and a memory copy. Thus, guaranteeing the allocation by using a
mempool for the structure in itself does not give us much. Until we
implement support for vector copy to avoid moving data through the host,
just allocate the workqueue structure using kmalloc.
This allows us to have a much smaller mempool.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk uses an internal page mempool for allocating pages on internal
bios. The main two users of this memory pool are partial reads (reads
with some sectors in cache and some on media) and padded writes, which
need to add dummy pages to an existing bio already containing valid
data (and with a large enough bioset allocated). In both cases, the
maximum number of pages per bio is defined by the maximum number of
physical sectors supported by the underlying device.
This patch fixes a bad mempool allocation, where the min_nr of elements
on the pool was fixed (to 16), which is lower than the maximum number
of sectors supported by NVMe (as of the time for this patch). Instead,
use the maximum number of allowed sectors reported by the device.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On low LUN configurations, make sure not to send bios that are bigger
than the buffer size.
Fixes: a4bd217b43 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix stat counter to collect the right number of I/Os being synced on the
completion path.
Fixes: 0880a9aa2d ("lightnvm: pblk: delete redundant buffer pointer")
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a REQ_FLUSH reaches pblk, the bio cannot be directly completed.
Instead, data on the write buffer is flushed and the bio is completed on
the completion pah. This might require some sectors to be padded in
order to guarantee a successful write.
This patch fixes a memory leak on the padded pages. A consequence of
this bad free was that internal bios not containing data (only a flush)
were not being completed.
Fixes: a4bd217b43 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The data buffer for the GC path allocates virtual memory through
vmalloc. When this change was introduced, a flag signaling kmalloc'ed
memory was wrongly introduced. Use the right flag when creating a bio
from this buffer.
Fixes: de54e703a4 ("lightnvm: pblk: use vmalloc for GC data buffer")
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a trivial change which reuses pblk_gc_should_kick instead of
repeating it again in pblk_rl_free_lines_inc.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Made it apply to the common case.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Correct it by converting little endian to cpu endian and also define
a macro for line version so that maintenance is easy.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The two pr_err messages are useless as they don't differentiate
error code.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This usually happens if we are developing with qemu and ll2pmode has
default value. Improve description.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It seems pblk_dealloc_page would race against pblk_alloc_pages for
line bitmap for sector allocation.The chances are very low but might
as well protect the bitmap properly.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because NVM needs BLK_DEV_NVME, select it automatically if we mark NVM
in config file before building kernel. Also append PCI to depends as
select doesn't automatically add dependencies.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use appropriate memory free calls based on allocation type used and
also fix number of times free is called if kmalloc fails.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove repeated calculation for number of channels while creating a
target device.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvm_tgt_types list was protected by wrong lock for NVM_INFO ioctl call
and can race with addition or removal of target types. Also
unregistering target type was not protected correctly.
Fixes: 5cd907853 ("lightnvm: remove nested lock conflict with mm")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a virtual block device is formatted and mounted after creating
with "nvme lnvm create... -t pblk", a removal from "nvm lnvm remove"
would result in this:
446416.309757] bdi-block not registered
[446416.309773] ------------[ cut here ]------------
[446416.309780] WARNING: CPU: 3 PID: 4319 at fs/fs-writeback.c:2159
__mark_inode_dirty+0x268/0x340
Ideally removal should return -EBUSY as block device is mounted after
formatting. This patch tries to address this checking if whole device
or any partition of it already mounted or not before removal.
Whole device is checked using "bd_super" member of block device. This
member is always set once block device has been mounted using a
filesystem. Another member "bd_part_count" takes care of checking any
if any partitions are under use. "bd_part_count" is only updated
under locks when partitions are opened or closed (first open and last
release). This at least does take care sending -EBUSY if removal is
being attempted while whole block device or any partition is mounted.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If target type module e.g. pblk here is unloaded (rmmod) while module
is in use (after creating target) system crashes. We fix this by
using module API refcnt.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a lba either hits the cache or corresponds to an empty entry in the
L2P table, we need to advance the bio according to the position in which
the lba is located. Otherwise, we will copy data in the wrong page, thus
causing data corruption for the application.
In case of a cache hit, we assumed that bio->bi_iter.bi_idx would
contain the correct index, but this is no necessarily true. Instead, use
the local bio advance counter and iterator. This guarantees that lbas
hitting the cache are copied into the right bv_page.
In case of an empty L2P entry, we omitted to advance the bio. In the
cases when the same I/O also contains a cache hit, data corresponding
to this lba will be copied to the wrong bv_page. Fix this by advancing
the bio as we do in the case of a cache hit.
Fixes: a4bd217b43 lightnvm: physical block device (pblk) target
Signed-off-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When removing a pblk instance, control the write I/O flow to the
controller as we do in the fast path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do bitmap checks only when debug mode is enable. The line bitmap used
for mapping to physical addresses is fairly large (~512KB) and it is
expensive to do this checks on the fast path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a read is directed to the cache, we risk that the lba has been
updated during the time we made the L2P table lookup and the time we are
actually reading form the cache. We intentionally not hold the L2P lock
not to block other threads.
While strict ordering is not a guarantee at this level (unless REQ_FLUSH
has been previously issued), we have experience that some databases that
have recently implemented direct I/O support, issue metadata reads very
close to the writes, without issuing a fsync in the middle. An easy way
to support them while they is to make an extra effort and check the L2P
map right before reading the cache.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a sanity check to the pblk initialization sequence in order to
ensure that enough LUNs have been allocated to store the line metadata.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When removing a pblk instance, pad the current line using asynchronous
I/O. This reduces the removal time from ~1 minute in the worst case to a
couple of seconds.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For now, we allocate a per I/O buffer for GC data. Since the potential
size of the buffer is 256KB and GC is not in the fast path, do this
allocation with vmalloc. This puts lets pressure on the memory
allocator at no performance cost.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When user threads place data into the write buffer, they reserve space
and do the memory copy out of the lock. As a consequence, when the write
thread starts persisting data, there is a chance that it is not copied
yet. In this case, avoid polling, and schedule before retrying.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prevent pblk->lines being double freed in case of an error during pblk
initialization.
Fixes: dd2a43437337: "lightnvm: pblk: sched. metadata on write thread"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the right types and conversions on le64 variables. Reported by
sparse.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While creating new device with NVM_DEV_CREATE if LUNs are already
allocated ioctl would return -ENOMEM which is wrong. This patch
propagates -EBUSY from nvm_reserve_luns which is correct response.
Fixes: ade69e243 ("lightnvm: merge gennvm with core")
Reviewed-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Due to user writes being decoupled from media writes because of the need
of an intermediate write buffer, irrecoverable media write errors lead
to pblk stalling; user writes fill up the buffer and end up in an
infinite retry loop.
In order to let user writes fail gracefully, it is necessary for pblk to
keep track of its own internal state and prevent further writes from
being placed into the write buffer.
This patch implements a state machine to keep track of internal errors
and, in case of failure, fail further user writes in an standard way.
Depending on the type of error, pblk will do its best to persist
buffered writes (which are already acknowledged) and close down on a
graceful manner. This way, data might be recovered by re-instantiating
pblk. Such state machine paves out the way for a state-based FTL log.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make constants to define sizes for internal mempools and workqueues. In
this process, adjust the values to be more meaningful given the internal
constrains of the FTL. In order to do this for workqueues, separate the
current auxiliary workqueue into two dedicated workqueues to manage
lines being closed and bad blocks.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set a dma area for all I/Os in order to read/write from/to the metadata
stored on the per-sector out-of-bound area.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At the moment, we separate the closed lines on three different list
based on their number of valid sectors. GC recycles lines from each list
based on capacity. Lines from each list are taken in a FIFO fashion.
Since the number of lines is limited (it corresponds to the number of
blocks in a LUN, which is somewhere between 1000-2000), we can afford
scanning the lists to choose the optimal line to be recycled. This helps
specially in lines with a high number of valid sectors.
If the number of blocks per LUN increases, we will consider a more
efficient policy.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Decouple bad block discovery from line allocation logic. This allows to
return meaningful error codes in case of bad block discovery failure.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
smeta size will always be suitable for a kmalloc allocation. Simplify
the code and leave the vmalloc fallback only for emeta, where the pblk
configuration has an impact.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a read request is sequential and its size aligns with a
multi-plane page size, use the multi-plane hint to process the I/O in
parallel in the controller.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After refactoring the metadata path, the backpointer controlling
synced I/Os in a line becomes unnecessary; metadata is scheduled
on the write thread, thus we know when the end of the line is reached
and act on it directly.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove a legacy variable that helped verifying the consistency of the
run-time metadata for the free line list. With the new metadata layout,
this check is no longer necessary.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At the moment, line metadata is persisted on a separate work queue, that
is kicked each time that a line is closed. The assumption when designing
this was that freeing the write thread from creating a new write request
was better than the potential impact of writes colliding on the media
(user I/O and metadata I/O). Experimentation has proven that this
assumption is wrong; collision can cause up to 25% of bandwidth and
introduce long tail latencies on the write thread, which potentially
cause user write threads to spend more time spinning to get a free entry
on the write buffer.
This patch moves the metadata logic to the write thread. When a line is
closed, remaining metadata is written in memory and is placed on a
metadata queue. The write thread then takes the metadata corresponding
to the previous line, creates the write request and schedules it to
minimize collisions on the media. Using this approach, we see that we
can saturate the media's bandwidth, which helps reducing both write
latencies and the spinning time for user writer threads.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Read requests allocate some extra memory to store its per I/O context.
Instead of requiring yet another memory pool for other type of requests,
generalize this context allocation (and change naming accordingly).
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Erase I/Os are scheduled with the following goals in mind: (i) minimize
LUNs collisions with write I/Os, and (ii) even out the price of erasing
on every write, instead of putting all the burden on when garbage
collection runs. This works well on the current design, but is specific
to the default mapping algorithm.
This patch generalizes the erase path so that other mapping algorithms
can select an arbitrary line to be erased instead. It also gets rid of
the erase semaphore since it creates jittering for user writes.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow to configure the number of maximum sectors per write command
through sysfs. This makes it easier to tune write command sizes for
different controller configurations.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new debug counter to measure cache hits on the read path
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Spare a double calculation on the fast write path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of a failure when submitting a request, convert the ppa_list
addresses to the target format so that it can interpret ppas for
recovery
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk_submit_read() uses bio_clone_bioset() but doesn't change the
io_vec, so bio_clone_fast() is a better choice.
It also uses fs_bio_set which is intended for filesystems. Using it
in a device driver can deadlock.
So allocate a new bioset, and and use bio_clone_fast().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier@cnexlabs.com>
Tested-by: Javier González <javier@cnexlabs.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_queue_split() is always called with the last arg being q->bio_split,
where 'q' is the first arg.
Also blk_queue_split() sometimes uses the passed-in 'bs' and sometimes uses
q->bio_split.
This is inconsistent and unnecessary. Remove the last arg and always use
q->bio_split inside blk_queue_split()
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Credit-to: Javier González <jg@lightnvm.io> (Noticed that lightnvm was missed)
Reviewed-by: Javier González <javier@cnexlabs.com>
Tested-by: Javier González <javier@cnexlabs.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Free memory correctly when an allocation fails on a loop and we free
backwards previously successful allocations.
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
'blks' is malloced in pblk_bb_discovery() and should be freed
before leaving from the nvm_get_tgt_bb_tbl() error handling cases,
otherwise it will cause memory leak. Also skip assign blks to
rlun->bb_list when error.
Fixes: a4bd217b43 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When block erases fail, these blocks are marked bad. The number of valid
blocks in the line was not updated, which could cause an infinite loop
on the erase path.
Fix this atomic counter and, in order to avoid taking an irq lock on the
interrupt context, make the erase counters atomic too.
Also, in the case that a significant number of blocks become bad in a
line, the result is the double shared metadata buffer (emeta) to stop
the pipeline until all metadata is flushed to the media. Increase the
number of metadata lines from 2 to 4 to avoid this case.
Fixes: a4bd217b43 "lightnvm: physical block device (pblk) target"
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a line allocation fails, for example, due to having too many bad
blocks, free its metadata correctly.
Fixes: a4bd217b43 "lightnvm: physical block device (pblk) target"
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a pblk line fails (or is recovered), make sure to take the line
management lock.
Fixes: a4bd217b43 "lightnvm: physical block device (pblk) target"
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Reading from ADDR_EMPTY is out of bounds. The current code generates a
static checker warning because we check for out of bounds "lba" before
we check for ADDR_EMPTY, so the second check is always false. It looks
like we intended ADDR_EMPTY to be a no-op without printing a warning.
Fixes: a4bd217b43 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This is a static checker fix, and perhaps not a real bug. The static
checker thinks that nr_secs could be negative. It would result in
zeroing more memory than intended. Anyway, even if it's not a bug,
changing this variable to unsigned makes the code easier to audit.
Fixes: a4bd217b43 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
From userspace calling ioctl(NVM_DEV_CREATE) was returning ENOMEM for
invalid arguments even though pblk (pblk_init) was returning correctly
-EINVAL to nvm_create_tgt inside core. This patch propagates the
correct return value to userspace.
Because pblk was introduced recently this only needs to go in 4.12.
Fixes: a4bd217b43 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The driver uses both u64 and sector_t to refer to offsets, and assigns between the
two. This causes one harmless warning when sector_t is 32-bit:
drivers/lightnvm/pblk-rb.c: In function 'pblk_rb_write_entry_gc':
include/linux/lightnvm.h:215:20: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
drivers/lightnvm/pblk-rb.c:324:22: note: in expansion of macro 'ADDR_EMPTY'
As the driver is already doing this inconsistently, changing the type
won't make it worse and is an easy way to avoid the warning.
Fixes: a4bd217b43 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
There were a bunch of places in pblk_lines_init() where we didn't set an
error code. And in pblk_writer_init() we accidentally return 1 instead
of a correct error code, which would result in a Oops later.
Fixes: 11a5d6fdf919 ("lightnvm: physical block device (pblk) target")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
WARN_ON() takes a condition, not an error message. I slightly tweaked
some conditions so hopefully it's more clear.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
These labels are reversed so we could end up dereferencing an error
pointer or leaking.
Fixes: 7f347ba6bb3a ("lightnvm: physical block device (pblk) target")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Convert sprintf calls to strlcpy in order to make possible buffer
overflow more obvious.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Prefix the nvm_free static function with a missing static keyword.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Target initialization has two responsibilities: creating the target
partition and instantiating the target. This patch enables to create a
factory partition (e.g., do not trigger recovery on the given target).
This is useful for target development and for being able to restore the
device state at any moment in time without requiring a full-device
erase.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Reorder disk allocation such that the disk structure can be put
safely.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The dev->lun_map bits are cleared twice if an target init error occurs.
First in the target clean routine, and then next in the nvm_tgt_create
error function. Make sure that it is only cleared once by extending
nvm_remove_tgt_devi() with a clear bit, such that clearing of bits can
ignored when cleaning up a successful initialized target.
Signed-off-by: Javier González <javier@cnexlabs.com>
Fix style.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
mempool_alloc() cannot fail if the gfp flags allow it to
sleep, and both GFP_KERNEL and GFP_NOIO allows for sleeping.
So rrpc_move_valid_pages() and rrpc_make_rq() don't need to
test the return value.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Until now erases have been submitted as synchronous commands through a
dedicated erase function. In order to enable targets implementing
asynchronous erases, refactor the erase path so that it uses the normal
async I/O submission functions. If a target requires sync I/O, it can
implement it internally. Also, adapt rrpc to use the new erase path.
Signed-off-by: Javier González <javier@cnexlabs.com>
Fixed spelling error.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
According to error handling in this function, it is likely that going to
'out' was expected here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The create target ioctl takes a lun begin and lun end parameter, which
defines the range of luns to initialize a target with. If the user does
not set the parameters, it default to only using lun 0. Instead,
defaults to use all luns in the OCSSD, as it is the usual behaviour
users want.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If one specifies the end lun id to be the absolute number of luns,
without taking zero indexing into account, the lightnvm core will pass
the off-by-one end lun id to target creation, which then panics during
nvm_ioctl_dev_create.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In order to register through the sysfs interface, a driver needs to know
its kobject. On a disk structure, this happens when the partition
information is added (device_add_disk), which for lightnvm takes place
after the target has been initialized. This means that on target
initialization, the kboject has not been created yet.
This patch adds a target function to let targets initialize their own
kboject as a child of the disk kobject.
Signed-off-by: Javier González <javier@cnexlabs.com>
Added exit typedef and passed gendisk instead of void pointer for exit.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix a memory leak when target creation fails. More specifically, free
the entire device structure given to the target (tgt_dev).
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When the lightnvm core had the "gennvm" layer between the device and the
target, there was a need for the core to be able to figure out which
target it should send an end_io callback to. Leading to a "double"
end_io, first for the media manager instance, and then for the target
instance. Now that core and gennvm is merged, there is no longer a need
for this, and a single end_io callback will do.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The number of configuration groups has been limited to one in current
code, even if there is support for up to four. With the introduction
of the open-channel SSD 1.3 specification, only a single
group is exposed onwards. Reflect this in the nvm_id structure.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Going from target specific ppa addresses to device was accomplished by
first converting target to generic ppa addresses and generic to device
addresses. The conversion was either open-coded or used the built-in
nvm_trans_* and nvm_map_* functions for conversion. Simplify the
interface and cleanup the calls to provide clean functions that now
either take a list of ppas or a nvm_rq, and is exposed through:
void nvm_ppa_* - target to/from device with a list of PPAs,
void nvm_rq_* - target to/from device with a nvm_rq.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The only check there was done was a debugging check. Remove it and
replace the return value with void to reduce error checking.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since the merge of gennvm and core, there is no longer a need for the
device specific bad block functions.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_submit_ppa* functions are no longer needed after gennvm and core
have been merged.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
After gennvm and core have been merged, there are no more callers to
nvm_erase_ppa. Therefore collapse the device specific and target
specific erase functions.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
For the first iteration of Open-Channel SSDs, it was anticipated that
there could be various media managers on top of an open-channel SSD,
such to allow vendors to plug in their own host-side FTLs, without the
media manager in between.
Now that an Open-Channel SSD is exposed as a traditional block device,
there is no longer a need for this. Therefore lets merge the gennvm code
with core and simplify the stack.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
changes over lots of "minor" driver subsystems, the largest being some
new FPGA drivers. Other than that, a few other new drivers, but no new
driver subsystems added for this kernel cycle, a nice change.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAtwA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyCgCeJn36u1AsBi7qZ3u/1hwD8k56s2IAnRo6U31r
WW65YcNTK7qYXqNbfgIa
=/t/V
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver patches for 4.10-rc1. Lots of tiny
changes over lots of "minor" driver subsystems, the largest being some
new FPGA drivers. Other than that, a few other new drivers, but no new
driver subsystems added for this kernel cycle, a nice change.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (107 commits)
uio-hv-generic: store physical addresses instead of virtual
Tools: hv: kvp: configurable external scripts path
uio-hv-generic: new userspace i/o driver for VMBus
vmbus: add support for dynamic device id's
hv: change clockevents unbind tactics
hv: acquire vmbus_connection.channel_mutex in vmbus_free_channels()
hyperv: Fix spelling of HV_UNKOWN
mei: bus: enable non-blocking RX
mei: fix the back to back interrupt handling
mei: synchronize irq before initiating a reset.
VME: Remove shutdown entry from vme_driver
auxdisplay: ht16k33: select framebuffer helper modules
MAINTAINERS: add git url for fpga
fpga: Clarify how write_init works streaming modes
fpga zynq: Fix incorrect ISR state on bootup
fpga zynq: Remove priv->dev
fpga zynq: Add missing \n to messages
fpga: Add COMPILE_TEST to all drivers
uio: pruss: add clk_disable()
char/pcmcia: add some error checking in scr24x_read()
...
Since targets are given a virtual target device, it is necessary to
translate all communication between targets and the backend device.
Implement the translation layer for get/set bad block table.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
On target-specific operations pass on nvm_tgt_dev instead of the generic
nvm device.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Target devices do not have access to the device driver operations.
Introduce a helper function that exposes the max. number of physical
sectors supported by the underlying device.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Avoid calling media manager and device-specific operations directly from
rrpc. Create helper functions on lightnvm's core instead.
Signed-off-by: Javier González <javier@cnexlabs.com>
Made it work with null_blk as well.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.
Since targets own the LUNs the are instantiated on top of and manage the
free block list internally, there is no need for a LUN abstraction in
the media manager. LUNs are intrinsically managed as in the physical
layout (ch:0,lun:0, ..., ch:0,lun:n, ch:1,lun:0, ch:1,lun:n, ...,
ch:m,lun:0, ch:m,lun:n) and given to the targets based on the target
creation ioctl. This simplifies LUN management and clears the path for a
partition manager to sit directly underneath LightNVM targets.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.
A part of this transformation is that targets manage their blocks
internally. This patch eliminates the nvm_block abstraction and moves
block management to the target logic. The rrpc target is transformed.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since LUNs are managed internally on targets, the media manager has no
access to the free LUN lists. Thus, debug functions that show LUN
information on the device should not be implemented on the media
manager, but rather on the target in itself.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since LUNs are managed internally on the target, there is no need for
the media manager to implement a get_lun operation.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
In order to naturally support multi-target instances on an Open-Channel
SSD, targets should own the LUNs they get blocks from and manage
provisioning internally. This is done in several steps.
This patch moves the block provisioning inside of the target and removes
the get/put block interface from the media manager.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
LUNs are exclusively owned by targets implementing a block device FTL.
Doing this reservation requires at the moment a 2-way callback gennvm
<-> target. The reason behind this is that LUNs were not assumed to
always be exclusively owned by targets. However, this design decision
goes against I/O determinism QoS (two targets would mix I/O on the same
parallel unit in the device).
This patch makes LUN reservation as part of the target creation on the
media manager. This makes that LUNs are always exclusively owned by the
target instantiated on top of them. LUN stripping and/or sharing should
be implemented on the target itself or the layers on top.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The gen_lun abstraction in the generic media manager was conceived on
the assumption that a single target would instantiated on top of it.
This has complicated target design to implement multi-instances. Remove
this abstraction and move its logic to nvm_lun, which manages physical
lun geometry and operations.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
There is a constant to refer to free blocks. Use it when marking bad
blocks instead of using a constant value
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Before vectored I/Os were supported on rrpc, the physical address was
stored as part of the nvm_rqd request. This variable become obsolete
when the ppa_list was introduced. Cleanup this variable.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Targets are assumed to used the same generic ppa format, where the
address is partitioned on ch:lun:block:pg:pl:sec. Thus, make the
function in charge of transforming the ppa address from a linear format
to the generic one available to all targets.
This function will be needed by the media manager in order to do target
mapping translations when targets are divided on different physical
partitions.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
LightNVM used to be managed and configured through sysfs. Since the
introduction of management ioctls this interface is redundant and
outdated. Get rid of it.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
rrpc cannot handle bios of size > 256kb due to NVMe using a 64 bit
bitmap to signal I/O completion. If a larger bio comes, split it
explicitly.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Bad blocks should be managed by block owners. This would be either
targets for data blocks or sysblk for system blocks.
In order to support this, export two functions: One to mark a block as
an specific type (e.g., bad block) and another to update the bad block
table on the device.
Move bad block management to rrpc.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Device blocks should be marked by the device and considered as bad
blocks by the media manager. Thus, do not make assumptions on which
blocks are going to be used by the device. In doing so we might lose
valid blocks from the free list.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Erases might be subject to host hints. An example is multi-plane
programming to erase blocks in parallel. Enable targets to specify this
hint.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Previously, LBA read and write were not supported in the lightnvm
specification. Now that it supports it, lets use the traditional
NVMe gendisk, and attach the lightnvm sysfs geometry export.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The Kconfig currently controlling compilation of this code is:
drivers/lightnvm/Kconfig:menuconfig NVM
drivers/lightnvm/Kconfig: bool "Open-Channel SSD target support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_misc_driver translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
We replace module.h with moduleparam.h because this file still uses
module params to control behaviour.
Also note that MODULE_ALIAS is a no-op for non-modular code.
Cc: Matias Bjorling <mb@lightnvm.io>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull block layer updates from Jens Axboe:
"This is the main pull request for block layer changes in 4.9.
As mentioned at the last merge window, I've changed things up and now
do just one branch for core block layer changes, and driver changes.
This avoids dependencies between the two branches. Outside of this
main pull request, there are two topical branches coming as well.
This pull request contains:
- A set of fixes, and a conversion to blk-mq, of nbd. From Josef.
- Set of fixes and updates for lightnvm from Matias, Simon, and Arnd.
Followup dependency fix from Geert.
- General fixes from Bart, Baoyou, Guoqing, and Linus W.
- CFQ async write starvation fix from Glauber.
- Add supprot for delayed kick of the requeue list, from Mike.
- Pull out the scalable bitmap code from blk-mq-tag.c and make it
generally available under the name of sbitmap. Only blk-mq-tag uses
it for now, but the blk-mq scheduling bits will use it as well.
From Omar.
- bdev thaw error progagation from Pierre.
- Improve the blk polling statistics, and allow the user to clear
them. From Stephen.
- Set of minor cleanups from Christoph in block/blk-mq.
- Set of cleanups and optimizations from me for block/blk-mq.
- Various nvme/nvmet/nvmeof fixes from the various folks"
* 'for-4.9/block' of git://git.kernel.dk/linux-block: (54 commits)
fs/block_dev.c: return the right error in thaw_bdev()
nvme: Pass pointers, not dma addresses, to nvme_get/set_features()
nvme/scsi: Remove power management support
nvmet: Make dsm number of ranges zero based
nvmet: Use direct IO for writes
admin-cmd: Added smart-log command support.
nvme-fabrics: Add host_traddr options field to host infrastructure
nvme-fabrics: revise host transport option descriptions
nvme-fabrics: rework nvmf_get_address() for variable options
nbd: use BLK_MQ_F_BLOCKING
blkcg: Annotate blkg_hint correctly
cfq: fix starvation of asynchronous writes
blk-mq: add flag for drivers wanting blocking ->queue_rq()
blk-mq: remove non-blocking pass in blk_mq_map_request
blk-mq: get rid of manual run of queue with __blk_mq_run_hw_queue()
block: export bio_free_pages to other modules
lightnvm: propagate device_add() error code
lightnvm: expose device geometry through sysfs
lightnvm: control life of nvm_dev in driver
blk-mq: register device instead of disk
...
device_add() may fail, and all callers are supposed to check the
return value, but one new user in lightnvm doesn't:
drivers/lightnvm/sysfs.c: In function 'nvm_sysfs_register_dev':
drivers/lightnvm/sysfs.c:184:2: error: ignoring return value of 'device_add',
declared with attribute warn_unused_result [-Werror=unused-result]
This changes the caller to propagate any error codes, which avoids
the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 38c9e260b9f9 ("lightnvm: expose device geometry through sysfs")
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
For a host to access an Open-Channel SSD, it has to know its geometry,
so that it writes and reads at the appropriate device bounds.
Currently, the geometry information is kept within the kernel, and not
exported to user-space for consumption. This patch exposes the
configuration through sysfs and enables user-space libraries, such as
liblightnvm, to use the sysfs implementation to get the geometry of an
Open-Channel SSD.
The sysfs entries are stored within the device hierarchy, and can be
found using the "lightnvm" device type.
An example configuration looks like this:
/sys/class/nvme/
└── nvme0n1
├── capabilities: 3
├── device_mode: 1
├── erase_max: 1000000
├── erase_typ: 1000000
├── flash_media_type: 0
├── media_capabilities: 0x00000001
├── media_type: 0
├── multiplane: 0x00010101
├── num_blocks: 1022
├── num_channels: 1
├── num_luns: 4
├── num_pages: 64
├── num_planes: 1
├── page_size: 4096
├── prog_max: 100000
├── prog_typ: 100000
├── read_max: 10000
├── read_typ: 10000
├── sector_oob_size: 0
├── sector_size: 4096
├── media_manager: gennvm
├── ppa_format: 0x380830082808001010102008
├── vendor_opcode: 0
├── max_phys_secs: 64
└── version: 1
Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
LightNVM compatible device drivers does not have a method to expose
LightNVM specific sysfs entries.
To enable LightNVM sysfs entries to be exposed, lightnvm device
drivers require a struct device to attach it to. To allow both the
actual device driver and lightnvm sysfs entries to coexist, the device
driver tracks the lifetime of the nvm_dev structure.
This patch refactors NVMe and null_blk to handle the lifetime of struct
nvm_dev, which eliminates the need for struct gendisk when a lightnvm
compatible device is provided.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
With LightNVM enabled namespaces, the gendisk structure is not exposed
to the user. This prevents LightNVM users from accessing the NVMe device
driver specific sysfs entries, and LightNVM namespace geometry.
Refactor the revalidation process, so that a namespace, instead of a
gendisk, is revalidated. This later allows patches to wire up the
sysfs entries up to a non-gendisk namespace.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
If NO_DMA=y:
drivers/built-in.o: In function `nvme_nvm_dev_dma_free':
lightnvm.c:(.text+0x23df1a): undefined reference to `dma_pool_free'
drivers/built-in.o: In function `nvme_nvm_dev_dma_alloc':
lightnvm.c:(.text+0x23df38): undefined reference to `dma_pool_alloc'
drivers/built-in.o: In function `nvme_nvm_destroy_dma_pool':
lightnvm.c:(.text+0x23df4c): undefined reference to `dma_pool_destroy'
drivers/built-in.o: In function `nvme_nvm_create_dma_pool':
lightnvm.c:(.text+0x23df7e): undefined reference to `dma_pool_create'
and
ERROR: "dma_pool_destroy" [drivers/nvme/host/nvme-core.ko] undefined!
ERROR: "dma_pool_free" [drivers/nvme/host/nvme-core.ko] undefined!
ERROR: "dma_pool_alloc" [drivers/nvme/host/nvme-core.ko] undefined!
ERROR: "dma_pool_create" [drivers/nvme/host/nvme-core.ko] undefined!
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch removes module_init()/module_exit() from driver code by using
module_misc_device() macro. All modules in this patch has a print
statement which is removed when module_misc_device() macro is used.
If undesirable this patch can be dropped entirely, this is the only
purpose of making this as a separate patch.
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces. For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense. Any check for READA is replaced with an
explicit check for REQ_RAHEAD. Also remove the READA alias for
REQ_RAHEAD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The __nvm_submit_ppa() function is not used outside lightnvm core.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The passed by reference ppa list in nvm_set_rqd_list() is updated when
multiple planes are available. In that case, each PPA plane is
incremented when the device side PPA list is created. This prevents the
caller to rely on the PPA list to be unmodified after a call.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The gen_mark_blk_bad function marks the wrong block when a block is on
a different channel. Fix the index calculation, so that it updates the
correct block.
Reported-by: Javier Gonzalez <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_get_blk() function is called with rlun->lock held. This is ok
when the media manager implementation doesn't go out of its atomic
context. However, if a media manager persists its metadata, and
guarantees that the block is given to the target, this is no longer
a viable approach. Therefore, clean up the flow of rrpc_map_page,
and make sure that nvm_get_blk() is called without any locks acquired.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The [get/put]_blk API enables targets to get ownership of blocks at
runtime. This information is currently not recorded on disk, and the
information is therefore lost on power failure. To restore the
metadata, the [get/put]_blk must persist its metadata. In that case,
we need to control the outer lock, so that we can disable them while
updating the on-disk metadata. Fortunately, the _unlocked versions can
be removed, which allows us to move the lock into the [get/put]_blk
functions.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The ->list, ->open_list, and ->closed_list lists were previously used
for statistics. However, their usage have been removed, and thus these
can safely be removed.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
If a media manager tries to initialize it targets upon media manager
initialization, the media manager will need to know which target types
are available in LightNVM. The lists of which managers and target types
are available shares the same lock.
Therefore, on initialization, the nvm_lock is taken by LightNVM core,
which later leads to a deadlock when target types are enumerated by the
media manager.
Add an exclusive lock for target types to resolve this conflict.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
To enable persistent block management to easily control creation and
removal of targets, we move target management into the media
manager. The LightNVM core continues to maintain which target types are
registered, while the media manager now keeps track of its initialized
targets.
Two new callbacks for the media manager are introduced. create_tgt and
remove_tgt. Note that remove_tgt returns 0 on successfully removing a
target, and returns 1 if the target was not found.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The generic manager should be called the general media manager, and
instead of using the rather long name of "gennvm" in front of each data
structures, use "gen" instead to shorten it. Update the description of
the media manager as well to make the media manager purpose clearer.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The responsibility of the media manager is not to keep track of
open/closed blocks. This is better maintained within a target,
that already manages this information on writes.
Remove the statistics and merge the states NVM_BLK_ST_OPEN and
NVM_BLK_ST_CLOSED.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A couple of small checkpatch fixups to stop it from complaining.
./drivers/lightnvm/core.c:360: WARNING: line over 80 characters
./drivers/lightnvm/core.c:360: ERROR: trailing statements should be on
next line
./drivers/lightnvm/core.c:503: WARNING: Block comments use a trailing */
on a separate line
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Checkpatch found two incidents where the type was preferred to be
written out in full.
./drivers/lightnvm/rrpc.h:184: WARNING: Prefer 'unsigned int' to bare
use of 'unsigned'
./drivers/lightnvm/rrpc.h:209: WARNING: Prefer 'unsigned int' to bare
use of 'unsigned'
./drivers/lightnvm/rrpc.c:51: WARNING: Prefer 'unsigned int' to bare use
of 'unsigned'
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Mark functions not used by ouside of thier implementing file as static.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Expose media manager mark_blk() to targets, as done for the rest of the
media manager callback functions.
Signed-off-by: Javier González <javier@cnexlabs.com>
Updated description
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Break the loop when rqd is not null to reduce
an unnecessary schedule.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch converts the simple bi_rw use cases in the block,
drivers, mm and fs code to set/get the bio operation using
bio_set_op_attrs/bio_op
These should be simple one or two liner cases, so I just did them
in one patch. The next patches handle the more complicated
cases in a module per patch.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_dev->max_pages_per_blk variable was removed in favor of the new
nvm->sec_per_blk variable. The ->max_pages_per_blk variable was still
used in rrpc_capacity, reporting the reserved capacity to zero. Replace
with ->sec_per_blk to calculate the reserved area again.
Signed-off-by: Javier González <javier@cnexlabs.com>
Updated patch description. Was "lightnvm: eliminate redundant variable"
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The number of ppas contained on a request is not necessarily the number
of pages that it maps to neither on the target nor on the device side.
In order to avoid confusion, rename nr_pages to nr_ppas since it is what
the variable actually contains.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Targets can update a block state when having a reference to an
in-memory virtual block. In the case that a target does not keep the
block metadata in memory, it does not have a way to update this
structure.
Therefore, expose gennvm_mark_blk() through the media managers
->mark_blk() callback and let targets update the state structure through
this callback.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Targets associated with a device manager are not freed on device
removal. They have to be manually removed before shutdown. Make sure
any outstanding targets are freed upon shutdown.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
When doing GC, rrpc calculates the physical LUN to which the rrpc block
belongs too. This calculation is based on the assumption that LUNs are
assigned sequentially to the LUN list. Use the reference to the LUN
instead. This saves us the calculation and allows us to align LUNs in a
different manner to, for example, take advantage of devide parallelism.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Until now, the dma pool have been exclusively used to allocate the ppa
list being sent to the device. In pblk (upcoming), we use these pools to
allocate metadata too. Thus, we generalize the names of some variables
on the dma helper functions to make the code more readable.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
rrpc does not save any metadata on a given request. Thus, do not attempt
to free the metadata dma region.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The ppa configured for retrieving the bad block table uses the internal
lun id to setup the get bad block ppa. This increases monotonically
with the number luns available. When configuring a ppa, the channel and
lun must be specified separately, leading to an out of bound memory
access in gennvm_block_bb when lun id goes beyond the luns available
within a channel.
Additional, remove out of bound check in gennvm_block_bb(), as it was a
buggy to begin with.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The set_bb_tbl takes struct nvm_rq and only uses its ppa_list and
nr_pages internally. Instead, make these two variables explicit.
This allows a user to call it without initializing a struct nvm_rq
first.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
We move the responsibility of managing the persistent bad block table to
the target. The target may choose to mark a block bad or retry writing
to it. Never the less, it should be the target that makes the decision
and not the media manager.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A virtual block enables a block to identify multiple physical blocks.
This is useful for metadata where a device media supports multiple
planes. In that case, a block, with multiple planes can be managed
as a single vblk. Reducing the metadata required by one forth.
nvm_set_rqd_ppalist() takes care of expanding a ppa_list with vblks
automatically. However, for some use-cases, where only a single physical
block is required, the ppa_list should not be expanded.
Therefore, add a vblk parameter to nvm_set_rqd_ppalist(), and only
expand the ppa_list if vblk is set.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that device ops->get_bb_table no longer uses a callback, the
struct factory_blks can be removed.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The device ops->get_bb_tbl() takes a callback, that allows the caller
to use its own callback function to update its data structures in the
returning function.
This makes it difficult to send parameters to the callback, and usually
is circumvented by small private structures, that both carry the callers
state and any flags needed to fulfill the update.
Refactor ops->get_bb_tbl() to fill a data buffer with the status of the
blocks returned, and let the user call the callback function manually.
That will provide the necessary flags and data structures and simplify
the logic around ops->get_bb_tbl().
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Users that wish to iterate all luns on a device. Must create a
struct ppa_addr and separate iterators for channels and luns. To set the
iterators, two loops are required, one to iterate channels, and another
to iterate luns. This leads to decrease in readability.
Introduce nvm_for_each_lun_ppa, which implements the nested loop and
sets ppa, channel, and lun variable for each loop body, eliminating
the boilerplate code.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A target name must be unique. However, a per-device registration of
targets is maintained on a dev->online_targets list, with a per-device
search for targets upon registration.
This results in a name collision when two targets, with the same name,
are created on two different targets, where the per-device list is not
shared.
Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The functions nvm_register_target(), nvm_unregister_target() and
associated list refers to a target type that is being registered by a
target type module. Rename nvm_*_targets() to nvm_*_tgt_type(), so that
the intension is clear.
This enables target instances to use the _nvm_*_targets() naming.
Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since we mainly use soffset in device sector size, we therefore store
this value in rrpc->soffset, instead of the offset in 512byte sector
size. This eliminates the "(ilog2(dev->sec_size) - 9)" calculation on
each I/O.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Updated patch description.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Calculate rrpc total blocks and sectors up front, make sense
to use them. For example, we use rrpc->nr_sects to calculate rrpc
area size, but it makes no sense if we don't initialize it up front,
since it would be zero until we finish rrpc luns init.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A memory leak occurs if the lower page table is initialized and the
following dev->lun_map fails on allocation.
Rearrange the initialization of lower page table to allow dev->lun_map
to fail gracefully without memory leak.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Move kfree of dev->lun_map to nvm_free()
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The get block table command returns a list of blocks and planes
with their associated state. Users, such as gennvm and sysblk,
manages all planes as a single virtual block.
It was therefore natural to fold the bad block list before it is
returned. However, to allow users, which manages on a per-plane
block level, to also use the interface, the get_bb_tbl interface is
changed to not fold by default and instead let the caller fold if
necessary.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The flash page size (fpg) and size across planes (pfpg) are convenient
to know when allocating buffer sizes. This has previously been a
calculated in various places. Replace with the pre-calculated values.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_submit_ppa function assumes that users manage all plane
blocks as a single block. Extend the API with nvm_submit_ppa_list
to allow the user to send its own ppa list. If the user submits more
than a single PPA, the user must take care to allocate and free
the corresponding ppa list.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The device ->submit_io() callback might fail to submit I/O to device.
In that case, the nvm_submit_ppa function should not wait for
completion. Instead return the ->submit_io() error.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This fixes the following warnings:
drivers/lightnvm/sysblk.c:125:9: warning: ‘ret’ may be used
uninitialized in this function
drivers/lightnvm/sysblk.c:275:15: warning: ‘ret’ may be used
uninitialized in this function
In both cases, ret is only set from within a loop that may not be entered.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
An Open-Channel SSD can work on two modes: (i) hybrid mode, where the
L2P table is maintained both by the host and by the device; and (ii)
full host-based, where the L2P table is uniquely maintained by the host.
In the advent of a new target implementing the full host-based mode, do
not assume that the L2P table must be loaded on the generic media
manager; check device properties loaded on the identify command instead.
Signed-off-by: Javier González <javier@cnexlabs.com>
Moved into the following statement.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
When the l2p table is loaded, addresses are checked for the lun they
belong to and luns are reserved accordingly. This assumes that metadata
is being stored in the backend device to recover the previous target
configuration. Since this is not yet implemented, this check collides
with some of the core initialization (e.g., sysblock initialization when
a page is formed by several sectors).
We take this check out and for now rely on that the right target will be
created instead. When metadata is stored to recover a target, this check
will come natural as part of the recovery strategy.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add a bitmap of luns to indicate the status
of luns: inuse/available. When create targets
do the necessary check to avoid allocating luns
that are already allocated.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Freed dev->lun_map if nvm_core_init later failed in the init process.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can create more than one target on a lightnvm
device by specifying its begin lun and end lun.
But only specify the physical address area is not
enough, we need to get the corresponding non-
intersection logical address area division from
the backend device's logcial address space.
Otherwise the targets on the device might use
the same logical addresses cause incorrect
information in the device's l2p table.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block driver updates from Jens Axboe:
"This is the block driver pull request for this merge window. It sits
on top of for-4.6/core, that was just sent out.
This contains:
- A set of fixes for lightnvm. One from Alan, fixing an overflow,
and the rest from the usual suspects, Javier and Matias.
- A set of fixes for nbd from Markus and Dan, and a fixup from Arnd
for correct usage of the signed 64-bit divider.
- A set of bug fixes for the Micron mtip32xx, from Asai.
- A fix for the brd discard handling from Bart.
- Update the maintainers entry for cciss, since that hardware has
transferred ownership.
- Three bug fixes for bcache from Eric Wheeler.
- Set of fixes for xen-blk{back,front} from Jan and Konrad.
- Removal of the cpqarray driver. It has been disabled in Kconfig
since 2013, and we were initially scheduled to remove it in 3.15.
- Various updates and fixes for NVMe, with the most important being:
- Removal of the per-device NVMe thread, replacing that with a
watchdog timer instead. From Christoph.
- Exposing the namespace WWID through sysfs, from Keith.
- Set of cleanups from Ming Lin.
- Logging the controller device name instead of the underlying
PCI device name, from Sagi.
- And a bunch of fixes and optimizations from the usual suspects
in this area"
* 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits)
NVMe: Expose ns wwid through single sysfs entry
drivers:block: cpqarray clean up
brd: Fix discard request processing
cpqarray: remove it from the kernel
cciss: update MAINTAINERS
NVMe: Remove unused sq_head read in completion path
bcache: fix cache_set_flush() NULL pointer dereference on OOM
bcache: cleaned up error handling around register_cache()
bcache: fix race of writeback thread starting before complete initialization
NVMe: Create discard zero quirk white list
nbd: use correct div_s64 helper
mtip32xx: remove unneeded variable in mtip_cmd_timeout()
lightnvm: generalize rrpc ppa calculations
lightnvm: remove struct nvm_dev->total_blocks
lightnvm: rename ->nr_pages to ->nr_sects
lightnvm: update closed list outside of intr context
xen/blback: Fit the important information of the thread in 17 characters
lightnvm: fold get bb tbl when using dual/quad plane mode
lightnvm: fix up nonsensical configure overrun checking
xen-blkback: advertise indirect segment support earlier
...
In rrpc, some calculations assume a certain configuration (e.g., 1 LUN,
1 sector per page). The reason behind this was that LightNVM used a
simple configuration with QEMU to test core features in the beginning.
This patch relaxes these assumptions and generalizes calculation,
allowing multiple luns to be used.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The struct nvm_dev->total_blocks was only used for calculating total
sectors. Remove and instead calculate total sectors from the number of
luns and its sectors.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The struct rrpc->nr_pages can easily be interpreted as the number of
flash pages allocated to rrpc, while it is the nr_sects. Make sure that
this is reflected from the variable name.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
When an I/O finishes, full blocks are moved from the open to the closed
list - a lock is taken to protect the list. This happens at the moment
in the interrupt context, which is not correct.
This patch moves this logic to the block workqueue instead, avoiding
holding a spinlock without interrupt save in an interrupt context.
Signed-off-by: Javier González <javier@cnexlabs.com>
Fixes: ff0e498bfa ("lightnvm: manage open and closed blocks sepa...")
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
When the media manager runs in dual or quad plane mode, lightnvm
abstracts away plane specific commands. This poses a problem for
get bad block table, as it reports bad blocks per plane, making the
table either two or four times bigger than expected. Fold the bad block
list before returning.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of checking a constant 0 actually check the space available. Even
better remember to allow for the header and also check the right amount of
space is needed.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
System block allows the device to initialize with its configured media
manager. The system blocks is written to disk, and read again when media
manager is determined. For this to work, the backend must store the
data. Device drivers, such as null_blk, does not have any backend
storage. This patch allows the media manager to be initialized without a
storage backend.
It also fix incorrect configuration of capabilities in null_blk, as it
does not support get/set bad block interface.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch fixes an error on the calculation of intersecting logical
addresses; it contemplates the case where a new request including
several addresses intersects with a single locked address. This case is
typical when multiple pages are sent in a new request, while GC - which
at the moment sends one address at the time - is running.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add a warning if irqs are disabled when locking a new address in rrpc.
The typical path to a new request does not disable irqs, but this is not
guaranteed in the future.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The bio is not returned if the data page cannot be allocated.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that a device can be managed using the system blocks, a method to
reset the device is necessary as well. This patch introduces logic to
reset the device easily to factory state and exposes it through an
ioctl.
The ioctl takes the following flags:
NVM_FACTORY_ERASE_ONLY_USER
By default all blocks, except host-reserved blocks are erased upon
factory reset. Instead of this, only erase host-reserved blocks.
NVM_FACTORY_RESET_HOST_BLKS
Mark host-reserved blocks to be erased and set their type to free.
NVM_FACTORY_RESET_GRWN_BBLKS
Mark "grown bad blocks" to be erased and set their type to free.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Use system block information to register the appropriate media manager.
This enables the LightNVM subsystem to instantiate a media manager
selected by the user, instead of relying on automatic detection by each
media manager loaded in the kernel.
A device must now be initialized before it can proceed to initialize its
media manager. Upon initialization, the configured media manager is
automatically initialized as well.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Based on the previous patch, we now introduce an ioctl to initialize the
device using nvm_init_sysblock and create the necessary system blocks.
The user may specify the media manager that they wish to instantiate on
top. Default from user-space will be "gennvm".
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
An Open-Channel SSD shall be initialized before use. To initialize, we
define an on-disk format, that keeps a small set of metadata to bring up
the media manager on top of the device.
The initial step is introduced to allow a user to format the disks for a
given media manager. During format, a system block is stored on one to
three separate luns on the device. Each lun has the system block
duplicated. During initialization, the system block can be retrieved and
the appropriate media manager can initialized.
The on-disk format currently covers (struct nvm_system_block):
- Magic value "NVMS".
- Monotonic increasing sequence number.
- The physical block erase count.
- Version of the system block format.
- Media manager type.
- Media manager superblock physical address.
The interface provides three functions to manage the system block:
int nvm_init_sysblock(struct nvm_dev *, struct nvm_sb_info *)
int nvm_get_sysblock(struct nvm *dev, struct nvm_sb_info *)
int nvm_update_sysblock(struct nvm *dev, struct nvm_sb_info *)
Each implement a part of the logic to manage the system block. The
initialization creates the first system blocks and mark them on the
device. Get retrieves the latest system block by scanning all pages in
the associated system blocks. The update sysblock writes new metadata
and allocates new block if necessary.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
NAND MLC memories have both lower and upper pages. When programming,
both of these must be written, before data can be read. However,
these lower and upper pages might not placed at even and odd flash
pages, but can be skipped. Therefore each flash memory has its lower
pages defined, which can then be used when programming and to know when
padding are necessary.
This patch implements the lower page definition in the specification,
and exposes it through a simple lookup table at dev->lptbl.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Some flash media has extended capabilities, such as programming SLC
pages on MLC/TLC flash, erase/program suspend, scramble and encryption.
MCCAP is introduced to detect support for these capabilities in the
command set.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
LightNVM targets need to know the state of the flash block when doing
flash optimizations. An example is implementing a write buffer to
respect the flash page size. Currently, block state is not accounted
for; the media manager only differentiates among free, bad and in-use
blocks.
This patch adds the logic in the generic media manager to enable
targets manage blocks into open and close separately, and it implements
such management in rrpc. It also adds a set of flags to describe the
state of the block (open, closed, free, bad).
In order to avoid taking two locks (nvm_lun and rrpc_lun) consecutively,
we introduce lockless get_/put_block primitives so that the open and
close list locks and future common logic is handled within the nvm_lun
lock.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a rrpc block only points to its nvm_lun. If a user wants to
find the associated rrpc lun, it will have to calculate the index and
look it up manually. By referencing the rrpc lun directly, this step can
be omitted, at the cost of a larger memory footprint.
This is important for upcoming patches that implement write buffering in
rrpc.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Internal logic for both core and media managers, does not have a
backing bio for issuing I/Os. Introduce nvm_submit_ppa to allow raw
I/Os to be submitted to the underlying device driver.
The function request the device, ppa, data buffer and its length and
will submit the I/O synchronously to the device. The return value may
therefore be used to detect any errors regarding the issued I/O.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of passing request error into the LightNVM modules, incorporate
it into the nvm_rq.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Sometimes a user want to erase multiple PPAs at the same time. Extend
nvm_erase_ppa to take multiple ppas and number of ppas to be erased.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
There is no need to check whether dev's pages per block is
beyond rrpc support every time we init a lun, we only need
to check it once before enter the lun init loop.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>