In order for the kernel to protect itself, let's call the SSBD mitigation
implemented by the higher exception level (either hypervisor or firmware)
on each transition between userspace and kernel.
We must take the PSCI conduit into account in order to target the
right exception level, hence the introduction of a runtime patching
callback.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Several source files have been taken from OpenSSL. In some of them a
comment that "permission to use under GPL terms is granted" was
included below a contradictory license statement. In several cases,
there was no indication that the license of the code was compatible
with the GPLv2.
This change clarifies the licensing for all of these files. I've
confirmed with the author (Andy Polyakov) that a) he has licensed the
files with the GPLv2 comment under that license and b) that he's also
happy to license the other files under GPLv2 too. In one case, the
file is already contained in his CRYPTOGAMS bundle, which has a GPLv2
option, and so no special measures are needed.
In all cases, the license status of code has been clarified by making
the GPLv2 license prominent.
The .S files have been regenerated from the updated .pl files.
This is a comment-only change. No code is changed.
Signed-off-by: Adam Langley <agl@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A few more fixes for v4.17:
- A fix for a crash in scm_call_atomic on qcom platforms
- Display fix for Allwinner A10
- A fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)
- A fix for eMMC corruption on hikey
- i2c-gpio descriptor tables for ixp4xx
+ a small typo fix
-----BEGIN PGP SIGNATURE-----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=mga+
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes for v4.17:
- a fix for a crash in scm_call_atomic on qcom platforms
- display fix for Allwinner A10
- a fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)
- a fix for eMMC corruption on hikey
- i2c-gpio descriptor tables for ixp4xx
... plus a small typo fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Fix i2c-gpio GPIO descriptor tables
arm64: dts: hikey: Fix eMMC corruption regression
firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
ARM: dts: sun4i: Fix incorrect clocks for displays
ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One
* Enable UFS and PCIe for Qualcomm msm8996/db820c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sPLc
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig
Qualcomm ARM64 Based defconfig Updates for v4.18
* Enable UFS and PCIe for Qualcomm msm8996/db820c
* tag 'qcom-arm64-defconfig-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: defconfig: Enable PCIe on msm8996 and db820c
arm64: defconfig: Enable UFS on msm8996
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch is a partial revert of
commit abd7d0972a ("arm64: dts: hikey: Enable HS200 mode on eMMC")
which has been causing eMMC corruption on my HiKey board.
Symptoms usually looked like:
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
...
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc0: new HS200 MMC card at address 0001
...
dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
print_req_error: I/O error, dev mmcblk0, sector 8810504
Aborting journal on device mmcblk0p10-8.
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
EXT4-fs error (device mmcblk0p10): ext4_journal_check_start:61: Detected aborted journal
EXT4-fs (mmcblk0p10): Remounting filesystem read-only
And quite often this would result in a disk that wouldn't properly
boot even with older kernels.
It seems the max-frequency property added by the above patch is
causing the problem, so remove it.
Cc: Ryan Grachek <ryan@edited.us>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei04@gmail.com>
Add the rtc enable clock for watchdog controller to make it work well.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds device nodes to enable one GPIO controller located on
digital chip, 2 EIC (external interrupt controller) controllers loacted
on PMIC and digital chip for Spreadtrum SC9860 platform.
Moreover this patch adds 3 GPIO keys relied on EIC controller to support
power key and volume up/down keys.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the support of ethernet, eMMC, Combo/INNO phy
and PCIe for Hi3798CV200
- Enable the LPC for hip06 and hip07
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=l2fi
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.18v3' of git://github.com/hisilicon/linux-hisi into next/defconfig
ARM64: hisilicon: defconfig updates for 4.18
- Enable the support of ethernet, eMMC, Combo/INNO phy
and PCIe for Hi3798CV200
- Enable the LPC for hip06 and hip07
* tag 'hisi-defconfig-for-4.18v3' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable HISILICON_LPC
arm64: defconfig: enable drivers for Poplar support
Signed-off-by: Olof Johansson <olof@lixom.net>
dtc now warns on incomplete OF graph endpoint connections:
arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm@10006000/port/endpoint: graph connection to node '/soc/funnel@10001000/ports/port@2/endpoint' is not bidirectional
The cause is a typo in 'remote-endpoint'.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add clocks necessary for DECON hardware windows no 4 and 5 on
Exynos5433.
-----BEGIN PGP SIGNATURE-----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=6wYh
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM64 changes for v4.18, part 2
1. Add clocks necessary for DECON hardware windows no 4 and 5 on
Exynos5433.
* tag 'samsung-dt64-4.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add more clocks to Exynos5433 Decon/DeconTV
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----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=corl
-----END PGP SIGNATURE-----
Merge tag 'berlin64-dt-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into next/dt
Berlin64 DT changes for v4.18
* tag 'berlin64-dt-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
arm64: dts: move berlin SoC files from marvell dir to synaptics dir
arm64: dts: berlin4ct-*.dts: use SPDX-License-Identifier
arm64: dts: berlin4ct: use SPDX-License-Identifier
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add support for SDM845 and associated peripherals
* Fix gic_irq_domain_translation warnings on Qualcomm platforms
* Add binding for GENI SE, Qualcomm bluetooth, and Command DB
* Add support for SDHCI and ramoops on MSM8992
* Fixup qcom,pcie devices to pcie
* Add wlan, bluetooth, and micro SD supplies on db820c
* Add UFS related nodes on MSM8996
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pxUm
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.18
* Add support for SDM845 and associated peripherals
* Fix gic_irq_domain_translation warnings on Qualcomm platforms
* Add binding for GENI SE, Qualcomm bluetooth, and Command DB
* Add support for SDHCI and ramoops on MSM8992
* Fixup qcom,pcie devices to pcie
* Add wlan, bluetooth, and micro SD supplies on db820c
* Add UFS related nodes on MSM8996
* tag 'qcom-arm64-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: msm8996: Add ufs related nodes
arm64: dts: msm8996: fix gic_irq_domain_translate warnings
arm64: dts: qcom: sdm845: Sort nodes in the soc by address
arm64: dts: qcom: sdm845: Sort nodes in the reserved mem by address
arm64: dts: sdm845: Add command DB node
arm64: dts: sdm845: Fix xo_board clock name and speed
arm64: dts: qcom: Add SDM845 SMEM nodes
arm64: dts: qcom: Add APSS shared mailbox node to SDM845
arm64: dts: msm8916: fix gic_irq_domain_translate warnings
dt-bindings: introduce Command DB for QCOM SoCs
arm64: dts: apq8096-db820c: Add micro sd card supplies
dt-bindings: soc: qcom: Add device tree binding for GENI SE
dt-bindings: net: bluetooth: Add qualcomm-bluetooth
arm64: dts: apq8096-db820c: enable bluetooth node
arm64: dts: apq8096-db820c: Enable wlan and bt en pins
arm64: dts: qcom: rename qcom,pcie devices to pcie
arm64: dts: msm8992: add pstore-ramoops support
arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP
arm64: dts: Enable onboard SDHCI on msm8992
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch removes the unused bt-en-1-8v regulator and moves the
bt_en_gios claim to the pm8994_gpios node.
This bt_en_gpio could have been moved to the bluetooth serial node but
instead this node declares an 'enable' gpio addressing the bt_en_gpio.
This is needed by the Qualcomm QCA6174 WLAN/BT combo chip that needs to
have the bt_en_gpio claimed even if only WLAN is used.
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The property name vddpe-supply is not included in
Documentation/devicetree/bindings/pci/qcom,pcie.txt
nor in the pcie-qcom PCIe Root Complex driver.
This property name was used in an initial patchset for pcie-qcom,
but was renamed in a later revision.
Therefore, the regulator is currently never enabled, leaving us with
unoperational wlan.
Fix this by using the correct regulator property name, so that wlan
comes up correctly.
Fixes: 1c8ca74a2ea1 ("arm64: dts: apq8096-db820c: Enable wlan and bt en pins")
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The UFS host controller occationally (20%) fails to enable
gcc_ufs_axi_clk because the UFS GDSC is not enabled. In most cases it's
enabled through the UFS phy driver, but to make sure it's enabled let's
enable it directly from the UFS host controller directly as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
We mostly have some changes to support the H6, Allwinner latest SoC. We're
still in the preliminary phase, with I2C, pinctrl and clock support.
-----BEGIN PGP SIGNATURE-----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=d7Ql
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 changes for 4.18
We mostly have some changes to support the H6, Allwinner latest SoC. We're
still in the preliminary phase, with I2C, pinctrl and clock support.
* tag 'sunxi-dt64-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: h6: add PCF8563 RTC on Pine H64 board
arm64: allwinner: h6: add R_I2C controller
arm64: allwinner: h6: add R_INTC interrupt controller
arm64: allwinner: h6: add node for R_PIO pin controller
arm64: allwinner: h6: add PRCM CCU device node
arm64: dts: allwinner: a64: bananapi-m64: add usb otg
arm64: dts: allwinner: axp803: Add drivevbus regulator
arm64: allwinner: h6: restore the usage of CCU slice macros
Signed-off-by: Olof Johansson <olof@lixom.net>
Here is our usual bunch of changes for the H3 and H5 SoCs that share the
same SoC design but with different CPUs.
This time, most of the changes are about supporting CPUFreq on these SoCs,
with voltage scaling being enabled for a number of boards.
-----BEGIN PGP SIGNATURE-----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=trdL
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3/H5 support for 4.18
Here is our usual bunch of changes for the H3 and H5 SoCs that share the
same SoC design but with different CPUs.
This time, most of the changes are about supporting CPUFreq on these SoCs,
with voltage scaling being enabled for a number of boards.
* tag 'sunxi-h3-h5-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: Add SY8106A regulator to Orange Pi PC
arm64: dts: allwinner: Add dts file for Libre Computer Board ALL-H3-CC H5 ver.
arm64: dts: allwinner: Sort dtb entries in Makefile
arm64: dts: allwinner: h5: Add cpu0 label for first cpu
ARM: dts: sun8i: h2+: Add Libre Computer Board ALL-H3-CC H2+ ver.
ARM: dts: sun8i: h2-plus: Sort dtb entries in Makefile
arm: dts: sun8i: h3: libretech-all-h3-cc: Move board definition to common dtsi
ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VCC-1V2 regulator voltage
ARM: dts: sun8i: h3: set the cpu-supply to VDD-CPUX on ALL-H3-CC H3 ver
ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VDD-CPUX voltage
ARM: dts: sun8i: h3: add SY8113B regulator used by Orange Pi One board
ARM: dts: sun8i: h2+: add SY8113B regulator used by Orange Pi Zero board
ARM: dts: sun8i: h3: add operating-points-v2 table for CPU
ARM: dts: sunxi: h3/h5: Add r_i2c I2C controller
ARM: dts: sunxi: h3/h5: Add r_i2c pinmux node
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add unit address for ls208xa-rdb SPI flash node matching 'reg'
property to fix DTC warning unit_address_vs_reg.
- Use hypen instead of underscore in aliases name for fsl-ls1012a to
fix DTC warning alias_paths.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbAYmKAAoJEFBXWFqHsHzOD9oIAJqlVIlArr2KZfqwLrPrfklv
xN/079g26XlJW9X1hff4sFXudLrwCBDP4FBjscDf9q1aO5Xpxx9BC4zTi5Pk51mY
hT7azoPYdee89aWzeAWWTJz7mqgu81gFIg1tmuyqFgm1TRfkpHM28oSAcMf7p9XX
ZC2cokKQ2sOlPUGnl9S26n4An2fRhxK4/tFNBD4KKm+HxNmSe9frPwkgtoX+8bdF
zL0jNQ6FtNnyWPD96p+cVjxB2CJmNf+F97v8tLRCG83W2ZLr9Hp1tIbzyhZ/hGEL
qTXMeyWD5ZKNY6tZtHyjkG+wGbq+BCTr3vIl/pgINc473fox2mmEzp4bMSZEumo=
=Lh6Z
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.18:
- Add unit address for ls208xa-rdb SPI flash node matching 'reg'
property to fix DTC warning unit_address_vs_reg.
- Use hypen instead of underscore in aliases name for fsl-ls1012a to
fix DTC warning alias_paths.
* tag 'imx-dt64-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: fsl-ls1012a: Fix DTC aliases warnings
arm64: dts: ls208xa-rdb: Pass unit name to SPI flash node
Signed-off-by: Olof Johansson <olof@lixom.net>
The msm8996 PCIe sits behind the "agnoc0", which is represented as a
simple-pm-bus, so enable support for this. Then enable the QMP phy
driver.
Also enable the atl1c ethernet driver and ath10k wlan driver to support
these components on the DragonBoard820c.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The driver/phy support for ipq8074 is available now.
So enabling the nodes in DT.
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add serial, i2c, bam, spi, qpic peripheral nodes.
While here, fix the PMU node's irq trigger to avoid
the boot warnings from GIC.
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Now that the driver has been merged for the HiSilicon
LPC host, enable the relevant config.
Turning on this config will also enable config
INDIRECT_PIO, which would have not been enabled
previously - see config info for more details.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe
for Hi3798CV200 Poplar platform.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
- Allow using Armada 3700 gpio controller as interrupt one too
- Describe SPI flash on the EspressoBin
- Mark ahci as dma-coherent for Armada 7K/8K
- Add 10G interface support Armada 7K/8K based boards (including MacBin)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWv8DYwAKCRALBhiOFHI7
1XpdAKCGSSJQjUSkwu7luezYH9Hz0rRkkQCgoPNedba4WxKrKck5aIFiqHyaFBk=
=pUZZ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.18-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.18 (part 1)
- Allow using Armada 3700 gpio controller as interrupt one too
- Describe SPI flash on the EspressoBin
- Mark ahci as dma-coherent for Armada 7K/8K
- Add 10G interface support Armada 7K/8K based boards (including MacBin)
* tag 'mvebu-dt64-4.18-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: armada-37xx: mark the gpio controllers as irq controller
arm64: dts: marvell: 7040-db: describe the 10G interface as fixed-link
arm64: dts: marvell: 8040-db: describe the 10G interfaces as fixed-link
arm64: dts: marvell: mcbin: enable the fourth network interface
arm64: dts: marvell: mcbin: add 10G SFP support
arm64: dts: marvell: mark CP110 ahci as dma-coherent
arm64: dts: armada-3720-espressobin: wire up spi flash
Signed-off-by: Olof Johansson <olof@lixom.net>
Adding thermal for Armada 7K/8K and SPI for Armada 3700
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWv7/MgAKCRALBhiOFHI7
1SyaAKCbxPDR48yWie2ZLxneKc/xZu/QwQCffSpKG1EARKRgk/rz5frnF1vwUuw=
=olHS
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.18-1' of git://git.infradead.org/linux-mvebu into next/defconfig
mvebu arm64 for 4.18 (part 1)
Adding thermal for Armada 7K/8K and SPI for Armada 3700
* tag 'mvebu-arm64-4.18-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable the Armada thermal driver
arm64: defconfig: enable CONFIG_SPI_ARMADA_3700
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable in ARM64 defconfig:
- Recently mainlined support for R-Car E3 (r8a77990) SoC
- HDMI sound and depdencies.
HDMI sound is used by R-Car Gen 3. These options are enabled as
modules to avoid unnecesesarily enlarging the kernel image.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlr9Rz4ACgkQ189kaWo3
T75JCxAAscx34XKK/0kpWvLz5T7ogQh6h2oJa/wzT8vym3uJfq+kmjNazyTQqF8R
QvkUV/tvMkq2JirSw0OJG4kS3suzYqnF2kp2lzLOeE1TDT0ILwnW06aqHcdXDRji
/dV3Xq0WGCLOBiDjrBB2VeiwqgnfJnPsMfHXgwOHo8u4+Dpt6NDnR+me0zGzWOH8
ERAhS0nYlyCZjSq2Vyz+LNr06tKsVQpWork7X9jD8VvBjQa5BeulcUM7aq8FQRMY
nNOXSwB9pejlYFm3+kREYBwtyhpswHEgssBUqIP00vaV/uIxUKaocI6QsJkJJFQQ
3Mfkoar74aArRr/D+91OcxPo2b2pdH8GxVkWslmfkjBW9DT30VKUeCDB1pMigVbD
1XP06ZtuDGZevFG7wjeAbRf44m5XVvXJhnK2O9waRPbLAuajmi8E+svJQu9qMCtZ
Ddkv05vuJcKLK6xohw0/BO+G+IK/ZdgzZ+4zOUO8YcmJDRRKQ9dFH5Fc3KHH4uw4
OWNfoyY6YAVgksLJfxK6zUqWzakJZtmZFisOFN+LDCbspCF9U3yHdCSao/XGyKP4
CvXm9pF+nDHUh6lTwKY5Ha+pKXHMr6W/7+EuQEZTayf+sizPDHWrDT6cvp62YK5m
Fc/3YfpkCbOmoObRTRssXyq4ipIMgrKtvNzYPge4eC3LQvEihAE=
=pmB3
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM64 Based SoC Defconfig Updates for v4.18
* Enable in ARM64 defconfig:
- Recently mainlined support for R-Car E3 (r8a77990) SoC
- HDMI sound and depdencies.
HDMI sound is used by R-Car Gen 3. These options are enabled as
modules to avoid unnecesesarily enlarging the kernel image.
* tag 'renesas-arm64-defconfig-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: enable R8A77990 SoC
arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD
arm64: defconfig: makes SND_SIMPLE_CARD to module
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add mailbox, stub clock, CPU frequency scaling, thermal cooling
management and pcie msi interruption support for hi3660
- Add LPC support for hip06 and hip07
- Add PCIe, usb and emmc support for hi3798cv200
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7lcf
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.18v2' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoC DT updates for 4.18v2
- Add mailbox, stub clock, CPU frequency scaling, thermal cooling
management and pcie msi interruption support for hi3660
- Add LPC support for hip06 and hip07
- Add PCIe, usb and emmc support for hi3798cv200
* tag 'hisi-arm64-dt-for-4.18v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi3798cv200: enable emmc support for poplar board
arm64: dts: hi3798cv200: enable usb2 support for poplar board
arm64: dts: hi3798cv200: enable PCIe support for poplar board
arm64: dts: hisi: Enable Hisi LPC node for hip07
arm64: dts: hisi: Enable Hisi LPC node for hip06
arm64: dts: hi3660: Add pcie msi interrupt attribute
arm64: dts: hi3660: Add thermal cooling management
arm64: dts: hi3660: Add CPU frequency scaling support
arm64: dts: hi3660: Add stub clock node
arm64: dts: hi3660: Add mailbox node
Signed-off-by: Olof Johansson <olof@lixom.net>
This new attribute allows the userspace to set the base address
of a reditributor region, relaxing the constraint of having all
consecutive redistibutor frames contiguous.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The conversion of the FPSIMD context switch trap code to C has added
some overhead to calling it, due to the need to save registers that
the procedure call standard defines as caller-saved.
So, perhaps it is no longer worth invoking this trap handler quite
so early.
Instead, we can invoke it from fixup_guest_exit(), with little
likelihood of increasing the overhead much further.
As a convenience, this patch gives __hyp_switch_fpsimd() the same
return semantics fixup_guest_exit(). For now there is no
possibility of a spurious FPSIMD trap, so the function always
returns true, but this allows it to be tail-called with a single
return statement.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The entire tail of fixup_guest_exit() is contained in if statements
of the form if (x && *exit_code == ARM_EXCEPTION_TRAP). As a result,
we can check just once and bail out of the function early, allowing
the remaining if conditions to be simplified.
The only awkward case is where *exit_code is changed to
ARM_EXCEPTION_EL1_SERROR in the case of an illegal GICv2 CPU
interface access: in that case, the GICv3 trap handling code is
skipped using a goto. This avoids pointlessly evaluating the
static branch check for the GICv3 case, even though we can't have
vgic_v2_cpuif_trap and vgic_v3_cpuif_trap true simultaneously
unless we have a GICv3 and GICv2 on the host: that sounds stupid,
but I haven't satisfied myself that it can't happen.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In fixup_guest_exit(), there are a couple of cases where after
checking what the exit code was, we assign it explicitly with the
value it already had.
Assuming this is not indicative of a bug, these assignments are not
needed.
This patch removes the redundant assignments, and simplifies some
if-nesting that becomes trivial as a result.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Now that the host SVE context can be saved on demand from Hyp,
there is no longer any need to save this state in advance before
entering the guest.
This patch removes the relevant call to
kvm_fpsimd_flush_cpu_state().
Since the problem that function was intended to solve now no longer
exists, the function and its dependencies are also deleted.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch adds SVE context saving to the hyp FPSIMD context switch
path. This means that it is no longer necessary to save the host
SVE state in advance of entering the guest, when in use.
In order to avoid adding pointless complexity to the code, VHE is
assumed if SVE is in use. VHE is an architectural prerequisite for
SVE, so there is no good reason to turn CONFIG_ARM64_VHE off in
kernels that support both SVE and KVM.
Historically, software models exist that can expose the
architecturally invalid configuration of SVE without VHE, so if
this situation is detected at kvm_init() time then KVM will be
disabled.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In order to make sve_save_state()/sve_load_state() more easily
reusable and to get rid of a potential branch on context switch
critical paths, this patch makes sve_pffr() inline and moves it to
fpsimd.h.
<asm/processor.h> must be included in fpsimd.h in order to make
this work, and this creates an #include cycle that is tricky to
avoid without modifying core code, due to the way the PR_SVE_*()
prctl helpers are included in the core prctl implementation.
Instead of breaking the cycle, this patch defers inclusion of
<asm/fpsimd.h> in <asm/processor.h> until the point where it is
actually needed: i.e., immediately before the prctl definitions.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
sve_pffr(), which is used to derive the base address used for
low-level SVE save/restore routines, currently takes the relevant
task_struct as an argument.
The only accessed fields are actually part of thread_struct, so
this patch changes the argument type accordingly. This is done in
preparation for moving this function to a header, where we do not
want to have to include <linux/sched.h> due to the consequent
circular #include problems.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Having read_zcr_features() inline in cpufeature.h results in that
header requiring #includes which make it hard to include
<asm/fpsimd.h> elsewhere without triggering header inclusion
cycles.
This is not a hot-path function and arguably should not be in
cpufeature.h in the first place, so this patch moves it to
fpsimd.c, compiled conditionally if CONFIG_ARM64_SVE=y.
This allows some SVE-related #includes to be dropped from
cpufeature.h, which will ease future maintenance.
A couple of missing #includes of <asm/fpsimd.h> are exposed by this
change under arch/arm64/. This patch adds the missing #includes as
necessary.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch refactors KVM to align the host and guest FPSIMD
save/restore logic with each other for arm64. This reduces the
number of redundant save/restore operations that must occur, and
reduces the common-case IRQ blackout time during guest exit storms
by saving the host state lazily and optimising away the need to
restore the host state before returning to the run loop.
Four hooks are defined in order to enable this:
* kvm_arch_vcpu_run_map_fp():
Called on PID change to map necessary bits of current to Hyp.
* kvm_arch_vcpu_load_fp():
Set up FP/SIMD for entering the KVM run loop (parse as
"vcpu_load fp").
* kvm_arch_vcpu_ctxsync_fp():
Get FP/SIMD into a safe state for re-enabling interrupts after a
guest exit back to the run loop.
For arm64 specifically, this involves updating the host kernel's
FPSIMD context tracking metadata so that kernel-mode NEON use
will cause the vcpu's FPSIMD state to be saved back correctly
into the vcpu struct. This must be done before re-enabling
interrupts because kernel-mode NEON may be used by softirqs.
* kvm_arch_vcpu_put_fp():
Save guest FP/SIMD state back to memory and dissociate from the
CPU ("vcpu_put fp").
Also, the arm64 FPSIMD context switch code is updated to enable it
to save back FPSIMD state for a vcpu, not just current. A few
helpers drive this:
* fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp):
mark this CPU as having context fp (which may belong to a vcpu)
currently loaded in its registers. This is the non-task
equivalent of the static function fpsimd_bind_to_cpu() in
fpsimd.c.
* task_fpsimd_save():
exported to allow KVM to save the guest's FPSIMD state back to
memory on exit from the run loop.
* fpsimd_flush_state():
invalidate any context's FPSIMD state that is currently loaded.
Used to disassociate the vcpu from the CPU regs on run loop exit.
These changes allow the run loop to enable interrupts (and thus
softirqs that may use kernel-mode NEON) without having to save the
guest's FPSIMD state eagerly.
Some new vcpu_arch fields are added to make all this work. Because
host FPSIMD state can now be saved back directly into current's
thread_struct as appropriate, host_cpu_context is no longer used
for preserving the FPSIMD state. However, it is still needed for
preserving other things such as the host's system registers. To
avoid ABI churn, the redundant storage space in host_cpu_context is
not removed for now.
arch/arm is not addressed by this patch and continues to use its
current save/restore logic. It could provide implementations of
the helpers later if desired.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In struct vcpu_arch, the debug_flags field is used to store
debug-related flags about the vcpu state.
Since we are about to add some more flags related to FPSIMD and
SVE, it makes sense to add them to the existing flags field rather
than adding new fields. Since there is only one debug_flags flag
defined so far, there is plenty of free space for expansion.
In preparation for adding more flags, this patch renames the
debug_flags field to simply "flags", and updates comments
appropriately.
The flag definitions are also moved to <asm/kvm_host.h>, since
their presence in <asm/kvm_asm.h> was for purely historical
reasons: these definitions are not used from asm any more, and not
very likely to be as more Hyp asm is migrated to C.
KVM_ARM64_DEBUG_DIRTY_SHIFT has not been used since commit
1ea66d27e7 ("arm64: KVM: Move away from the assembly version of
the world switch"), so this patch gets rid of that too.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
[maz: fixed minor conflict]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for optimising the way KVM manages switching the
guest and host FPSIMD state, it is necessary to provide a means for
code outside arch/arm64/kernel/fpsimd.c to restore the user trap
configuration for SVE correctly for the current task.
Rather than requiring external code to duplicate the maintenance
explicitly, this patch moves the trap maintenenace to
fpsimd_bind_to_cpu(), since it is logically part of the work of
associating the current task with the cpu.
Because fpsimd_bind_to_cpu() is rather a cryptic name to publish
alongside fpsimd_bind_state_to_cpu(), the former function is
renamed to fpsimd_bind_task_to_cpu() to make its purpose more
explicit.
This patch makes appropriate changes to ensure that
fpsimd_bind_task_to_cpu() is always called alongside
task_fpsimd_load(), so that the trap maintenance continues to be
done in every situation where it was done prior to this patch.
As a side-effect, the metadata updates done by
fpsimd_bind_task_to_cpu() now change from conditional to
unconditional in the "already bound" case of sigreturn. This is
harmless, and a couple of extra stores on this slow path will not
impact performance. I consider this a reasonable price to pay for
a slightly cleaner interface.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Currently the FPSIMD handling code uses the condition task->mm ==
NULL as a hint that task has no FPSIMD register context.
The ->mm check is only there to filter out tasks that cannot
possibly have FPSIMD context loaded, for optimisation purposes.
Also, TIF_FOREIGN_FPSTATE must always be checked anyway before
saving FPSIMD context back to memory. For these reasons, the ->mm
checks are not useful, providing that TIF_FOREIGN_FPSTATE is
maintained in a consistent way for all threads.
The context switch logic is already deliberately optimised to defer
reloads of the regs until ret_to_user (or sigreturn as a special
case), and save them only if they have been previously loaded.
These paths are the only places where the wrong_task and wrong_cpu
conditions can be made false, by calling fpsimd_bind_task_to_cpu().
Kernel threads by definition never reach these paths. As a result,
the wrong_task and wrong_cpu tests in fpsimd_thread_switch() will
always yield true for kernel threads.
This patch removes the redundant checks and special-case code,
ensuring that TIF_FOREIGN_FPSTATE is set whenever a kernel thread
is scheduled in, and ensures that this flag is set for the init
task. The fpsimd_flush_task_state() call already present in
copy_thread() ensures the same for any new task.
With TIF_FOREIGN_FPSTATE always set for kernel threads, this patch
ensures that no extra context save work is added for kernel
threads, and eliminates the redundant context saving that may
currently occur for kernel threads that have acquired an mm via
use_mm().
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The init task is started with thread_flags equal to 0, which means
that TIF_FOREIGN_FPSTATE is initially clear.
It is theoretically possible (if unlikely) that the init task could
reach userspace without ever being scheduled out. If this occurs,
data left in the FPSIMD registers by the kernel could be exposed.
This patch fixes this anomaly by ensuring that the init task's
initial TIF_FOREIGN_FPSTATE is set.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Fixes: 005f78cd88 ("arm64: defer reloading a task's FPSIMD state to userland resume")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In preparation for allowing non-task (i.e., KVM vcpu) FPSIMD
contexts to be handled by the fpsimd common code, this patch adapts
task_fpsimd_save() to save back the currently loaded context,
removing the explicit dependency on current.
The relevant storage to write back to in memory is now found by
examining the fpsimd_last_state percpu struct.
fpsimd_save() does nothing unless TIF_FOREIGN_FPSTATE is clear, and
fpsimd_last_state is updated under local_bh_disable() or
local_irq_disable() everywhere that TIF_FOREIGN_FPSTATE is cleared:
thus, fpsimd_save() will write back to the correct storage for the
loaded context.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
To make the lazy FPSIMD context switch trap code easier to hack on,
this patch converts it to C.
This is not amazingly efficient, but the trap should typically only
be taken once per host context switch.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This patch uses the new update_thread_flag() helpers to simplify a
couple of if () set; else clear; constructs.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
fpsimd_last_state.st is set to NULL as a way of indicating that
current's FPSIMD registers are no longer loaded in the cpu. In
particular, this is done when the kernel temporarily uses or
clobbers the FPSIMD registers for its own purposes, as in CPU PM or
kernel-mode NEON, resulting in them being populated with garbage
data not belonging to a task.
Commit 17eed27b02 ("arm64/sve: KVM: Prevent guests from using
SVE") factors this operation out as a new helper
fpsimd_flush_cpu_state() to make it clearer what is being done
here, and on SVE systems this helper is now used, via
kvm_fpsimd_flush_cpu_state(), to invalidate the registers after KVM
has run a vcpu. The reason for this is that KVM does not yet
understand how to restore the full host SVE registers itself after
loading the guest FPSIMD context into them.
This exposes a particular problem: if fpsimd_last_state.st is set
to NULL without also setting TIF_FOREIGN_FPSTATE, the kernel may
continue to think that current's FPSIMD registers are live even
though they have actually been clobbered.
Prior to the aforementioned commit, the only path where
fpsimd_last_state.st is set to NULL without setting
TIF_FOREIGN_FPSTATE is when kernel_neon_begin() is called by a
kernel thread (where current->mm can be NULL). This does not
matter, because the only harm is that at context-switch time
fpsimd_thread_switch() may unnecessarily save the FPSIMD registers
back to current's thread_struct (even though kernel threads are not
considered to have any FPSIMD context of their own and the
registers will never be reloaded).
Note that although CPU_PM_ENTER lacks the TIF_FOREIGN_FPSTATE
setting, every CPU passing through that path must subsequently pass
through CPU_PM_EXIT before it can re-enter the kernel proper.
CPU_PM_EXIT sets the flag.
The sve_flush_cpu_state() function added by commit 17eed27b02
also lacks the proper maintenance of TIF_FOREIGN_FPSTATE. This may
cause the bits of a host task's SVE registers that do not alias the
FPSIMD register file to spontaneously appear zeroed if a KVM vcpu
runs in the same task in the meantime. Although this effect is
hidden by the fact that the non-FPSIMD bits of the SVE registers
are zeroed by a syscall anyway, it is doubtless a bad idea to rely
on these different code paths interacting correctly under future
maintenance.
This patch makes TIF_FOREIGN_FPSTATE an unconditional side-effect
of fpsimd_flush_cpu_state(), and removes the set_thread_flag()
calls that become redundant as a result. This ensures that
TIF_FOREIGN_FPSTATE cannot remain clear if the FPSIMD state in the
FPSIMD registers is invalid.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Enable GLINK RPM so that we get RPM regulators and clocks and enable the
UFS host controller driver and the Qualcomm UFS platform driver. The UFS
phy is selected by the Qualcomm UFS driver.
The simple ondemand devfreq governor must be builtin, as there's no
mechanism for automatically loading it, causing UFS HCD initialization
to fail.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Commit 15122ee2c5 ("arm64: Enforce BBM for huge IO/VMAP mappings")
disallowed block mappings for ioremap since that code does not honor
break-before-make. The same APIs are also used for permission updating
though and the extra checks prevent the permission updates from happening,
even though this should be permitted. This results in read-only permissions
not being fully applied. Visibly, this can occasionaly be seen as a failure
on the built in rodata test when the test data ends up in a section or
as an odd RW gap on the page table dump. Fix this by using
pgattr_change_is_safe instead of p*d_present for determining if the
change is permitted.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: 15122ee2c5 ("arm64: Enforce BBM for huge IO/VMAP mappings")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.
As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.
As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
>From the hardware perspective, the actual pclk of the AO uarts
is the corresponding clkc_ao uart gate, not the main clock controller clk81.
This was not problem so far, because the uart_gate had
the CLK_IGNORE_UNUSED flag, which kept the gate open.
We plan to remove the CLK_IGNORE_UNUSED flag in another patch,
but before doing that, we need to fix the clock in the DTS file.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This add the AO (Always-On part) clock DT info for Meson-AXG SoC
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
[khilman: cleanup subject]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add all '1x' clocks to decon and decontv devices. Enabling those clocks
is needed to get proper display on hardware windows no 4 and 5.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The i2c AO is used for the MIC daughter card of the S400 board
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the pins related to the i2c AO controller of the meson-axg platform
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The clock specified for the i2c AO controller is the one for the EE
domain, which is incorrect as this controller needs the clock for AO
i2c controller.
Fixes: dc6f858e26 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Remove undocumented and unused "clk_i2c" clock name and the second
interrupt from i2c nodes of meson-axg platform. Those seems to have
been copy/pasted from the vendor kernel
Fixes: dc6f858e26 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
In do_page_fault(), we handle some kernel faults early, and simply
die() with a message. For faults handled later, we dump the faulting
address, decode the ESR, walk the page tables, and perform a number of
steps to ensure that this data is reported.
Let's unify the handling of fatal kernel faults with a new
die_kernel_fault() helper, handling all of these details. This is
largely the same as the existing logic in __do_kernel_fault(), except
that addresses are consistently padded to 16 hex characters, as would be
expected for a 64-bit address.
The messages currently logged in do_page_fault are adjusted to fit into
the die_kernel_fault() message template.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The naming of is_permission_fault() makes it sound like it should return
true for permission faults from EL0, but by design, it only does so for
faults from EL1.
Let's make this clear by dropping el1 in the name, as we do for
is_el1_instruction_abort().
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that we're seeing CPUs shipping with LSE atomics, default them to
'on' in Kconfig. CPUs without the instructions will continue to use
LDXR/STXR-based sequences, but they will be placed out-of-line by the
compiler.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ICU size in CP110 is not 0x10 but at least 0x440 bytes long (from the
specification).
Fixes: 6ef84a827c ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add the UFS QMP phy node and the UFS host controller node, now that we
have working UFS and the necessary clocks in place.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This is pure-churn and should be a no-op. I'm doing it in the hopes
of reducing merge conflicts. When things are sorted in a sane way
(and by base address seems sane) then it's less likely that future
patches will cause merge conflicts.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Let's keep the reserved-memory node tidy and neat and keep it sorted
by address. This should have no functional change.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add command DB node based on the bindings example.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The RPMh clock driver assumes that the xo_board clock is named
"xo_board", not "xo-board". Add a "clock-output-names" property to
the device tree to get the right name.
Also add the proper speed for the xo-clock as 38400000. This is
internally divided in RPMh clock driver to get "bi_tcxo" at 19200000.
After this change the clock tree in /sys/kernel/debug/clk/clk_summary
looks much better.
NOTES:
- Technically you could argue that this clock could belong in board
.dts files, not in the SoC one. However at the moment it's believed
that 100% of sdm845 boards will have an external clock at 38.4. It
can always be moved later if necessary.
- We could rename the "xo-board" device tree node to "xo_board" to
achieve the same effect as this patch. Presumably device-tree folks
would rather keep node names using dashes though.
- We could change the RPMh clock driver to use a dash to achieve the
same effect as this patch, but all other clocks in the clock tree
use underscores. It seems silly to change just this one.
Fixes: 7bafa643647f ("arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add all the necessary dt nodes to support SMEM driver
on SDM845. It also adds the required memory carveouts
so that the kernel does not access memory that is in
use.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch add the node to support APSS shared
mailbox on SDM845
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Thierry Escande <thierry.escande@linaro.org>
Tested-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds missing microSD card supplies, without this uSD
card will not be detected.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add a new serial node for the Qualcomm BT controller QCA6174. This
allows automatic probing and hci registration through the serdev
framework instead of relying on the userspace helpers.
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch enables regulators and gpios for the Qualcomm QCA6174 BT/WLAN
combo controller.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The node name for a PCIe host bridge must be "pcie" as required by
the binging. dtc now warns about it:
arch/arm64/boot/dts/qcom/apq8096-db820c.dtb: Warning (pci_bridge): /soc/agnoc@0/qcom,pcie@610000: node name is not "pci" or "pcie"
arch/arm64/boot/dts/qcom/apq8096-db820c.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/arm64/boot/dts/qcom/msm8996-mtp.dtb: Warning (pci_bridge): /soc/agnoc@0/qcom,pcie@610000: node name is not "pci" or "pcie"
arch/arm64/boot/dts/qcom/msm8996-mtp.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
This renames the nodes as appropriate.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
With the addition of this ramoops node it enables post mortem
analysis if a debug cable is not attached and/or not available.
All addresses and values were extracted from CAF AOSP marshmallow
DR 1.6.
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This enables SDHCI on the Nexus 5X as well creates common smd_rpm node
which can be shared between both 5X and 6P as per HW design.
Given the lack of documentation, only downstream code was used as a reference
and it eludes to the fact that 8994-rpm-regulator is common between both msm8992
& msm8994. [ see msm.git branch: msm-angler-3.10-marshmallow-mr1, msm8992.dtsi]
At this early stage of development it makes sense for the 8994-rpm-regulator
to be common until data / documentation suggests otherwise.
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
If userspace faults on a kernel address, handing them the raw ESR
value on the sigframe as part of the delivered signal can leak data
useful to attackers who are using information about the underlying hardware
fault type (e.g. translation vs permission) as a mechanism to defeat KASLR.
However there are also legitimate uses for the information provided
in the ESR -- notably the GCC and LLVM sanitizers use this to report
whether wild pointer accesses by the application are reads or writes
(since a wild write is a more serious bug than a wild read), so we
don't want to drop the ESR information entirely.
For faulting addresses in the kernel, sanitize the ESR. We choose
to present userspace with the illusion that there is nothing mapped
in the kernel's part of the address space at all, by reporting all
faults as level 0 translation faults taken to EL1.
These fields are safe to pass through to userspace as they depend
only on the instruction that userspace used to provoke the fault:
EC IL (always)
ISV CM WNR (for all data aborts)
All the other fields in ESR except DFSC are architecturally RES0
for an L0 translation fault taken to EL1, so can be zeroed out
without confusing userspace.
The illusion is not entirely perfect, as there is a tiny wrinkle
where we will report an alignment fault that was not due to the memory
type (for instance a LDREX to an unaligned address) as a translation
fault, whereas if you do this on real unmapped memory the alignment
fault takes precedence. This is not likely to trip anybody up in
practice, as the only users we know of for the ESR information who
care about the behaviour for kernel addresses only really want to
know about the WnR bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise modules that use these arithmetic operations will fail to
link. We accomplish this with the usual EXPORT_SYMBOL, which on most
architectures goes in the .S file but the ARM64 maintainers prefer that
insead it goes into arm64ksyms.
While we're at it, we also fix this up to use SPDX, and I personally
choose to relicense this as GPL2||BSD so that these symbols don't need
to be export_symbol_gpl, so all modules can use the routines, since
these are important general purpose compiler-generated function calls.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: PaX Team <pageexec@freemail.hu>
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
For LSE atomics that read and write a register operand, we need to
ensure that these operands are annotated as "early clobber" if the
register is written before all of the input operands have been consumed.
Failure to do so can result in the compiler allocating the same register
to both operands, leading to splats such as:
Unable to handle kernel paging request at virtual address 11111122222221
[...]
x1 : 1111111122222222 x0 : 1111111122222221
Process swapper/0 (pid: 1, stack limit = 0x000000008209f908)
Call trace:
test_atomic64+0x1360/0x155c
where x0 has been allocated as both the value to be stored and also the
atomic_t pointer.
This patch adds the missing clobbers.
Cc: <stable@vger.kernel.org>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reported-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The arm_pmu::handle_irq() callback has the same prototype as a generic
IRQ handler, taking the IRQ number and a void pointer argument which it
must convert to an arm_pmu pointer.
This means that all arm_pmu::handle_irq() take an IRQ number they never
use, and all must explicitly cast the void pointer to an arm_pmu
pointer.
Instead, let's change arm_pmu::handle_irq to take an arm_pmu pointer,
allowing these casts to be removed. The redundant IRQ number parameter
is also removed.
Suggested-by: Hoeun Ryu <hoeun.ryu@lge.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
For historical reasons, we open-code lm_alias() in kvm_ksym_ref().
Let's use lm_alias() to avoid duplication and make things clearer.
As we have to pull this from <linux/mm.h> (which is not safe for
inclusion in assembly), we may as well move the kvm_ksym_ref()
definition into the existing !__ASSEMBLY__ block.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
A handful of fixes. I've been queuing them up a bit too long so the list
is longer than it otherwise would have been spread out across a few -rcs.
In general, it's a scattering of fixes across several platforms, nothing
truly serious enough to point out.
There's a slightly larger batch of them for the Davinci platforms due
to work to bring them back to life after some time, so there's a handful
of regressions, some of them going back very far, others more recent.
There's also a few patches fixing DT on Renesas platforms since they
changed some bindings without remaining backwards compatible, splitting
up describing LVDS as a proper bridge instead of having it as part of the
display unit. We could push for them to be backwards compatible with old
device trees, but it's likely to regress eventually if nobody's actually
using said compatibility.
-----BEGIN PGP SIGNATURE-----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=qPpk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes. I've been queuing them up a bit too long so the
list is longer than it otherwise would have been spread out across a
few -rcs.
In general, it's a scattering of fixes across several platforms,
nothing truly serious enough to point out.
There's a slightly larger batch of them for the Davinci platforms due
to work to bring them back to life after some time, so there's a
handful of regressions, some of them going back very far, others more
recent.
There's also a few patches fixing DT on Renesas platforms since they
changed some bindings without remaining backwards compatible,
splitting up describing LVDS as a proper bridge instead of having it
as part of the display unit.
We could push for them to be backwards compatible with old device
trees, but it's likely to regress eventually if nobody's actually
using said compatibility"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
ARM: keystone: fix platform_domain_notifier array overrun
arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433
ARM: dts: imx51-zii-rdu1: fix touchscreen bindings
firmware: arm_scmi: Use after free in scmi_create_protocol_device()
ARM: dts: cygnus: fix irq type for arm global timer
Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"
tee: check shm references are consistent in offset/size
tee: shm: fix use-after-free via temporarily dropped reference
ARM: dts: imx7s: Pass the 'fsl,sec-era' property
ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
ARM: dts: correct missing "compatible" entry for ti81xx SoCs
ARM: OMAP1: ams-delta: fix deferred_fiq handler
arm64: tegra: Make BCM89610 PHY interrupt as active low
ARM: davinci: fix GPIO lookup for I2C
ARM: dts: logicpd-som-lv: Fix pinmux controller references
ARM: dts: logicpd-som-lv: Fix Audio Mute
ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
...
This contains a one-line update to the device tree of the Tegra186 P3310
processor module, fixing the polarity of the PHY interrupt. Originally,
this was queued to go into v4.18, but the PHY ID matching patch has now
found its way into v4.17-rc5, which means that the PHY driver will know
how to identify the PHY on this board and try to use the interrupt. This
will unfortunately cause networking to break on P3310, hence why I think
this should go into v4.17.
-----BEGIN PGP SIGNATURE-----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=+6cH
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes
arm64: tegra: Device tree fixes for v4.17
This contains a one-line update to the device tree of the Tegra186 P3310
processor module, fixing the polarity of the PHY interrupt. Originally,
this was queued to go into v4.18, but the PHY ID matching patch has now
found its way into v4.17-rc5, which means that the PHY driver will know
how to identify the PHY on this board and try to use the interrupt. This
will unfortunately cause networking to break on P3310, hence why I think
this should go into v4.17.
* tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Make BCM89610 PHY interrupt as active low
Signed-off-by: Olof Johansson <olof@lixom.net>
This allows to reference these gpio controller as interrupt parent. Also
add a comment which cpu line names are managed by the controllers
because "nb" and "sb" usually doesn't appear in schematics, but MPPX_Y
do.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The Salvator boards use an ADV7482 receiver for HDMI and CVBS inputs.
Provide ADV7482 node on the i2c4 bus, along with connectors for the
hdmi and cvbs inputs, and link to the csi20 and csi40 nodes as outputs.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a new serial node for the Qualcomm BT controller QCA6174. This
allows automatic probing and hci registration through the serdev
framework instead of relying on the userspace helpers.
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* x86 fixes: PCID, UMIP, locking
* Improved support for recent Windows version that have a 2048 Hz
APIC timer.
* Rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
* Better behaved selftests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJa/bkTAAoJEL/70l94x66Dzf8IAJ1GqtXi0CNbq8MvU4QIqw0L
HLIRoe/QgkTeTUa2fwirEuu5I+/wUyPvy5sAIsn/F5eiZM7nciLm+fYzw6F2uPIm
lSCqKpVwmh8dPl1SBaqPnTcB1HPVwcCgc2SF9Ph7yZCUwFUtoeUuPj8v6Qy6y21g
jfobHFZa3MrFgi7kPxOXSrC1qxuNJL9yLB5mwCvCK/K7jj2nrGJkLLDuzgReCqvz
isOdpof3hz8whXDQG5cTtybBgE9veym4YqJY8R5ANXBKqbFlhaNF1T3xXrdPMISZ
7bsGgkhYEOqeQsPrFwzAIiFxe2DogFwkn1BcvJ1B+duXrayt5CBnDPRB6Yxg00M=
=H0d0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- ARM/ARM64 locking fixes
- x86 fixes: PCID, UMIP, locking
- improved support for recent Windows version that have a 2048 Hz APIC
timer
- rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
- better behaved selftests
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls
KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity
KVM: arm/arm64: Properly protect VGIC locks from IRQs
KVM: X86: Lower the default timer frequency limit to 200us
KVM: vmx: update sec exec controls for UMIP iff emulating UMIP
kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled
KVM: selftests: exit with 0 status code when tests cannot be run
KVM: hyperv: idr_find needs RCU protection
x86: Delay skip of emulated hypercall instruction
KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs
Writes to ZCR_EL1 are self-synchronising, and so may be expensive
in typical implementations.
This patch adopts the approach used for costly system register
writes elsewhere in the kernel: the system register write is
suppressed if it would not change the stored value.
Since the common case will be that of switching between tasks that
use the same vector length as one another, prediction hit rates on
the conditional branch should be reasonably good, with lower
expected amortised cost than the unconditional execution of a
heavyweight self-synchronising instruction.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that we have an accurate view of the physical topology
we need to represent it correctly to the scheduler. Generally MC
should equal the LLC in the system, but there are a number of
special cases that need to be dealt with.
In the case of NUMA in socket, we need to assure that the sched
domain we build for the MC layer isn't larger than the DIE above it.
Similarly for LLC's that might exist in cross socket interconnect or
directory hardware we need to assure that MC is shrunk to the socket
or NUMA node.
This patch builds a sibling mask for the LLC, and then picks the
smallest of LLC, socket siblings, or NUMA node siblings, which
gives us the behavior described above. This is ever so slightly
different than the similar alternative where we look for a cache
layer less than or equal to the socket/NUMA siblings.
The logic to pick the MC layer affects all arm64 machines, but
only changes the behavior for DT/MPIDR systems if the NUMA domain
is smaller than the core siblings (generally set to the cluster).
Potentially this fixes a possible bug in DT systems, but really
it only affects ACPI systems where the core siblings is correctly
set to the socket siblings. Thus all currently available ACPI
systems should have MC equal to LLC, including the NUMA in socket
machines where the LLC is partitioned between the NUMA nodes.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Propagate the topology information from the PPTT tree to the
cpu_topology array. We can get the thread id and core_id by assuming
certain levels of the PPTT tree correspond to those concepts.
The package_id is flagged in the tree and can be found by calling
find_acpi_cpu_topology_package() which terminates
its search when it finds an ACPI node flagged as the physical
package. If the tree doesn't contain enough levels to represent
all of the requested levels then the root node will be returned
for all subsequent levels.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The cluster concept isn't architecturally defined for arm64.
Lets match the name of the arm64 topology field to the kernel macro
that uses it.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The /sys cache entries should support ACPI/PPTT generated cache
topology information. For arm64, if ACPI is enabled, determine
the max number of cache levels and populate them using the PPTT
table if one is available.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Now that we have a PPTT parser, in preparation for its use
on arm64, lets build it.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Its helpful to be able to lookup the acpi_processor_id associated
with a logical cpu. Provide an arm64 helper to do this.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds a fixed-link node to the 10G interface of the 7040-db
board. This is required as the mvpp2 driver now uses phylink. The best
solution would have been to describe the SFP cage but they are not
wired correctly, and thus unusable, so we chose to use fixed-link
instead.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This patch adds a fixed-link node to both 10G interfaces of the 8040-db
board. This is required as the mvpp2 driver now uses phylink. The best
solution would have been to describe the SFP cages but they are not
wired correctly, and thus unusable, so we chose to use fixed-link
instead.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This patch enables the fourth network interface on the Marvell
Macchiatobin. It is configured in the 2500Base-X PHY mode. The SFP cage
is also described.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This patch adds the SFP cage description in the Marvell Armada 8040
mcbin, for both 10G interfaces.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
[Antoine: small reworks, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-05-17
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Provide a new BPF helper for doing a FIB and neighbor lookup
in the kernel tables from an XDP or tc BPF program. The helper
provides a fast-path for forwarding packets. The API supports
IPv4, IPv6 and MPLS protocols, but currently IPv4 and IPv6 are
implemented in this initial work, from David (Ahern).
2) Just a tiny diff but huge feature enabled for nfp driver by
extending the BPF offload beyond a pure host processing offload.
Offloaded XDP programs are allowed to set the RX queue index and
thus opening the door for defining a fully programmable RSS/n-tuple
filter replacement. Once BPF decided on a queue already, the device
data-path will skip the conventional RSS processing completely,
from Jakub.
3) The original sockmap implementation was array based similar to
devmap. However unlike devmap where an ifindex has a 1:1 mapping
into the map there are use cases with sockets that need to be
referenced using longer keys. Hence, sockhash map is added reusing
as much of the sockmap code as possible, from John.
4) Introduce BTF ID. The ID is allocatd through an IDR similar as
with BPF maps and progs. It also makes BTF accessible to user
space via BPF_BTF_GET_FD_BY_ID and adds exposure of the BTF data
through BPF_OBJ_GET_INFO_BY_FD, from Martin.
5) Enable BPF stackmap with build_id also in NMI context. Due to the
up_read() of current->mm->mmap_sem build_id cannot be parsed.
This work defers the up_read() via a per-cpu irq_work so that
at least limited support can be enabled, from Song.
6) Various BPF JIT follow-up cleanups and fixups after the LD_ABS/LD_IND
JIT conversion as well as implementation of an optimized 32/64 bit
immediate load in the arm64 JIT that allows to reduce the number of
emitted instructions; in case of tested real-world programs they
were shrinking by three percent, from Daniel.
7) Add ifindex parameter to the libbpf loader in order to enable
BPF offload support. Right now only iproute2 can load offloaded
BPF and this will also enable libbpf for direct integration into
other applications, from David (Beckett).
8) Convert the plain text documentation under Documentation/bpf/ into
RST format since this is the appropriate standard the kernel is
moving to for all documentation. Also add an overview README.rst,
from Jesper.
9) Add __printf verification attribute to the bpf_verifier_vlog()
helper. Though it uses va_list we can still allow gcc to check
the format string, from Mathieu.
10) Fix a bash reference in the BPF selftest's Makefile. The '|& ...'
is a bash 4.0+ feature which is not guaranteed to be available
when calling out to shell, therefore use a more portable variant,
from Joe.
11) Fix a 64 bit division in xdp_umem_reg() by using div_u64()
instead of relying on the gcc built-in, from Björn.
12) Fix a sock hashmap kmalloc warning reported by syzbot when an
overly large key size is used in hashmap then causing overflows
in htab->elem_size. Reject bogus attr->key_size early in the
sock_hash_alloc(), from Yonghong.
13) Ensure in BPF selftests when urandom_read is being linked that
--build-id is always enabled so that test_stacktrace_build_id[_nmi]
won't be failing, from Alexei.
14) Add bitsperlong.h as well as errno.h uapi headers into the tools
header infrastructure which point to one of the arch specific
uapi headers. This was needed in order to fix a build error on
some systems for the BPF selftests, from Sirio.
15) Allow for short options to be used in the xdp_monitor BPF sample
code. And also a bpf.h tools uapi header sync in order to fix a
selftest build failure. Both from Prashant.
16) More formally clarify the meaning of ID in the direct packet access
section of the BPF documentation, from Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables the Armada thermal driver to support thermal
management on Marvell EBU Armada SoCs (7K,8K).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
When waiting for a cacheline to change state in cmpwait, we may immediately
wake-up the first time around the outer loop if the event register was
already set (for example, because of the event stream).
Avoid these spurious wakeups by explicitly clearing the event register
before loading the cacheline and setting the exclusive monitor.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It is probably safe to assume that all Armv8-A implementations have a
multiplier whose efficiency is comparable or better than a sequence of
three or so register-dependent arithmetic instructions. Select
ARCH_HAS_FAST_MULTIPLIER to get ever-so-slightly nicer codegen in the
few dusty old corners which care.
In a contrived benchmark calling hweight64() in a loop, this does indeed
turn out to be a small win overall, with no measurable impact on
Cortex-A57 but about 5% performance improvement on Cortex-A53.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable the Renesas R-Car E3 (R8A77990) SoC in the ARM64 defconfig.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas H3 ES1.0 have one extra CSI-2 node, CSI21 which is not present
for later ES versions of H3.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables EthernetAVB for r8a77990 Ebisu board.
Based on a patch from Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds EthernetAVB node for r8a77990 (R-Car E3).
Based on a patch from Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds GPIO nodes for r8a77990 (R-Car E3).
Based on a patch from Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
[simon: dropped use of deprecated "renesas,gpio-rcar"]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the initial device tree for the V3H Starter Kit board.
The board has 1 debug serial port (SCIF0); include support for it,
so that the serial console can work.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
When adding the R8A77980 EtherAVB device I failed to notice that it does
not have the usual "status" property disabling the described devices in
anticipation that the board device trees enable the devices according to
their needs. This causes the EtherAVB driver to successfully probe despite
e.g. the needed pins not having been configured -- luckily, "eth<n>" device
can't be opened anyway...
Fixes: bf6f90832f ("arm64: dts: renesas: r8a77980: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
When adding the R8A77970 EtherAVB device I failed to notice that it does
not have the usual "status" property disabling the described devices in
anticipation that the board device trees enable the devices according to
their needs. This causes the EtherAVB driver to successfully probe despite
e.g. the needed pins not having been configured -- luckily, "eth<n>" device
can't be opened anyway...
Fixes: bea2ab136e ("arm64: dts: renesas: r8a77970: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add resets property to CAN-FD node to describe it in the reset topology of
on-SoC devices. This allows to reset the CAN-FD device using the Reset
Controller API.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the performance monitor unit for the Cortex-A53 cores on the
R-Car V3M (r8a77970) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the second Cortex-A53 CPU core on the Renesas
R-Car V3M (r8a77970) SoC, and adjust the interrupt delivery masks for
ARM Generic Interrupt Controller and Architectured Timer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add SDHI nodes to the DT of the r8a77965 SoC.
Based on several similar patches of the R8A7796 device tree
by Simon Horman <horms+renesas@verge.net.au>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
On the R-Car Starter Kit Premier/Pro, all of the DDR0, DDR1, DDR0C, and
DDR1C power rails need to be kept powered when backup mode is enabled.
Reflect this in the "rohm,ddr-backup-power" property for the BD9571MWV
PMIC node.
The accessory power switch (SW8) is a momentary switch, hense specify
"rohm,rstbmode-pulse".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
On Salvator-X(S), all of the DDR0, DDR1, DDR0C, and DDR1C power rails
need to be kept powered when backup mode is enabled. Reflect this in
the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node.
The accessory power switch (SW23) is a toggle switch, hence specify
"rohm,rstbmode-level".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the ROHM BD9571MWV PMIC.
This was based on the example in the DT binding documentation, but using
IRQ0 instead of a GPIO interrupt, as that matches the schematics, and
because INTC-EX is a simpler block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add missing spaces after commas.
Replace 8 consecutive spaces by a TAB.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables USB2.0 host channel 3 for r8a7795 with Salvator-XS.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables HS-USB channel3 node for r8a7795 with Salvator-XS.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch enables usb2_phy3 node for r8a7795 with Salvator-XS.
You must change the SW31 to OFF-OFF-ON-ON-ON-ON on the board.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the EEPROM found on Salvator-X and -XS boards for H3, M3-W, and M3-N
on the IIC_DVFS bus.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the Condor board dependent part of the CAN-FD device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A77980 part of the CAN-FD device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[simon: consistently use tabs for indentation]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the Eagle board dependent part of the CAN-FD device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A77970 part of the CAN-FD device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Based on previous work by Ryo Kataoka <ryo.kataoka.wt@renesas.com>.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[simon: moved thermal node to preseve ordering of nodes by bus address]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Replace the hardcoded power domain indices by R8A77965_PD_* symbols.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
[simon: dropped hunk to include r8a77965-sysc.h which is already present]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that the commit 7755b40d07 ("dt-bindings: power: add R8A77980 SYSC
power domain definitions") has hit Linus' tree, we can replace the bare
numbers (we had to use to avoid a cross tree dependency) with these macro
definitions...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Now that the commit 35b3c462da ("dt-bindings: clock: add R8A77980 CPG
core clock definitions") has hit Linus' tree, we can replace the bare
numbers (we had to use to avoid a cross tree dependency) with these macro
definitions...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The rcar_sound port nodes have unit names and thus should have register
properties.
This is flagged by dtc as follows:
# make dtbs W=1
...
DTC arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property
DTC arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb
arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property
Prior to this patch the port nodes only defined in board DTS files.
As the register properties are common this patch defines the port nodes
and provides register properties in the SoC DTS file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
The rcar_sound port nodes have unit names and thus should have register
properties.
This is flagged by dtc as follows:
# make dtbs W=1
...
DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property
...
DTC arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property
Prior to this patch the port nodes only defined in board DTS files.
As the register properties are common this patch defines the port nodes
and provides register properties in the SoC DTS file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
The rcar_sound port nodes have unit names and thus should have register
properties.
This is flagged by dtc as follows:
# make dtbs W=1
...
DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property
...
DTC arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property
DTC arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@0: node has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@1: node has a unit name, but no reg property
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dtb: Warning (unit_address_vs_reg): /soc/sound@ec500000/ports/port@2: node has a unit name, but no reg property
Prior to this patch the port nodes only defined in board DTS files.
As the register properties are common this patch defines the port nodes
and provides register properties in the SoC DTS file.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Define the V3M Starter Kit board dependent part of the DU and LVDS device
nodes. Also add the device nodes for Thine THC63LVD1024 LVDS decoder and
Analog Devices ADV7511W HDMI transmitter...
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the Condor board dependent part of the MMC0 (connected to eMMC chip)
device node along with the necessary voltage regulators...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The DU1 external dot clock is provided by the fixed frequency clock
generator X21, while the DU0 and DU3 clocks are provided by the
programmable Versaclock6 clock generator.
Enable the clocks, and the HDMI encoder for the M3-N Salvator-XS, and
hook it up to the HDMI connector
Based on patches from Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The DU1 external dot clock is provided by the fixed frequency clock
generator X21, while the DU0 and DU3 clocks are provided by the
programmable Versaclock5 clock generator.
Enable the clocks, and the HDMI encoder for the M3-N Salvator-X board
and hook it up to the HDMI connector.
Based on patches from Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the HDMI encoder to the R8A77965 DT in disabled state.
Based on a similar patch of the R8A7796 device tree
by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Kieran: Rebase to top of tree]
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The DU entity node has been previously added but only as a placeholder.
Populate the node with the properties to use the device.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The r8a77965 has 4 VSP instances.
Based on a similar patch of the R8A7796 device tree
by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Kieran: Rebased to top of tree, fixed sort orders]
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The FCPs handle the interface between various IP cores and memory. Add
the instances related to the FDPs and VSP2s.
Based on a similar patch of the R8A7796 device tree
by Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Kieran: Rebase to top of tree]
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The cache controller node should not have unit-addresses and reg
properties. So, this patch removes them.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The basic support patch 9491a8b17530 ("arm64: dts: renesas: Add Renesas
R8A77990 SoC support") lacks the compatible "arm,psci-1.0" in the psci
node. So, this patch revises it.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled
in DT on the r8a7795 ES1.0 Soc.
This is a follow up for a patch by Magnus Damm for the
the r8a7795 ES2.0 and other R-Car Gen 3 SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Current Sound is using simple-audio-card which can't support HDMI.
To use HDMI sound, we need to use audio-graph-card.
But, one note is that r8a7795 has 2 HDMI ports, but r8a7796 has 1.
Because of this mismatch, supporting HDMI on salvator-common is
impossible.
Thus, this patch exchange sound card to audio-graph-card and keep
supporting ak4613 as 1st sound node.
r8a7795/r8a7796 salvator-x{s} need to add HDMI sound individually.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A77980 part of the MMC0 (SDHI2) device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the (previously omitted) EtherAVB pin data to the Condor board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the (previously omitted) SCIF0 pin data to the Condor board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A77980 part of the PFC device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the (previously omitted) EtherAVB pin data to the V3M Starter Kit
board's device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the (previously omitted) EtherAVB pin data to the Eagle board's
device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio"
instead of "mdc". Fix the inconsistency, now the pinctrl drivers for
R-Car H3, M3-W, and M3-N have gained support for the traditional pin
group name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio"
instead of "mdc". Fix the inconsistency, now the pinctrl drivers for
R-Car H3, M3-W, and M3-N have gained support for the traditional pin
group name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
On other Renesas SoCs, the pin group for the MDIO bus is named "mdio"
instead of "mdc". Fix the inconsistency, now the pinctrl drivers for
R-Car H3, M3-W, and M3-N have gained support for the traditional pin
group name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled
in DT on the r8a77995 SoC.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: rebased]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled
in DT on the r8a77970 SoC.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: rebased]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled
in DT on the r8a7796 SoC.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Remove 'status = "disabled"' to make sure all IPMMU devices are enabled
in DT on the r8a7795 SoC.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Basic support for the Renesas Ebisu board based on R-Car E3:
- Memory,
- Main crystal,
- Serial console,
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[shimoda: rebase and add SPDX-License-Identifier]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC:
- PSCI
- CPU (single)
- Cache controller
- Main clocks and controller
- Interrupt controller
- Timer
- PMU
- Reset controller
- Product register
- System controller
- UART for console
Inspried by a patch by Takeshi Kihara in the BSP.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sort subnodes of the soc node.
- The primary key is the bus address.
- The secondary key is the IP block.
- The tertiary key is the node name.
This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[simon: rebased; move fcpvd0 to after vspd0]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sort subnodes of the soc node.
- The primary key is the bus address.
- The secondary key is the IP block.
- The tertiary key is the node name.
This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sort subnodes of the root node alphanumerically.
This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sort subnodes of the soc node.
- The primary key is the bus address.
- The secondary key is the IP block.
- The tertiary key is the node name.
This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Sort subnodes of the root node alphanumerically.
This is part of an ongoing effort to provide consistent node
order in the DT of Renesas SoCs to improve maintainability.
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable HDMI output on Renesas R-Car V3M Eagle board.
The HDMI output is enabled connecting the DU LVDS output to the
transparent LVDS converter THC63LVD1024, and successively routing its
RGB output to the ADV7511W HDMI encoder.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[for THC63LVD1024: ]
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A77970 part of the LVDS device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A77970 part of the DU device node.
Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns@hitachi.com>.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe VSPD0 in the R8A77970 device tree; it will be used by DU in
the next patch...
Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns@hitachi.com>.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Marc Zyngier