Commit Graph

781652 Commits

Author SHA1 Message Date
Heiko Carstens 4ec8483590 s390: remove gcc version check (4.3 or newer)
git commit cafa0010cd ("Raise the minimum required gcc version to 4.6")
raised the minimum gcc version to 4.6. Therefore remove the s390 specific
gcc 4.3 version check, which wasn't sufficient anyway.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-08-21 15:57:58 +02:00
Harald Freudenberger 3d8f60d38e s390/zcrypt: hex string mask improvements for apmask and aqmask.
The sysfs attributes /sys/bus/ap/apmask and /sys/bus/ap/aqmask
and the kernel command line arguments ap.apm and ap.aqm get
an improvement of the value parsing with this patch:

The mask values are bitmaps in big endian order starting with bit 0.
So adapter number 0 is the leftmost bit, mask is 0x8000... The sysfs
attributes and the kernel command line accept 2 different formats:
 - Absolute hex string starting with 0x like "0x12345678" does set
   the mask starting from left to right. If the given string is shorter
   than the mask it is padded with 0s on the right. If the string is
   longer than the mask an error comes back (EINVAL).
 - Relative format - a concatenation (done with ',') of the terms
   +<bitnr>[-<bitnr>] or -<bitnr>[-<bitnr>]. <bitnr> may be any
   valid number (hex, decimal or octal) in the range 0...255.
   Here are some examples:
     "+0-15,+32,-128,-0xFF"
     "-0-255,+1-16,+0x128"

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-08-21 15:56:45 +02:00
Masami Hiramatsu 9161a864ff tracing/kprobes: Fix to check notrace function with correct range
Fix within_notrace_func() to check notrace function correctly.

Since the ftrace_location_range(start, end) function checks
the range inclusively (start <= ftrace-loc <= end), the end
address must not include the entry address of next function.

However, within_notrace_func() uses kallsyms_lookup_size_offset()
to get the function size and calculate the end address from
adding the size to the entry address. This means the end address
is the entry address of the next function.

In the result, within_notrace_func() fails to find notrace
function if the next function of the target function is
ftraced.

Let's subtract 1 from the end address so that ftrace_location_range()
can check it correctly.

Link: http://lkml.kernel.org/r/153485669706.16611.17726752296213785504.stgit@devbox

Fixes: commit 45408c4f92 ("tracing: kprobes: Prohibit probing on notrace function")
Reported-by: Michael Rodin <michael@rodin.online>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-21 09:41:12 -04:00
Masami Hiramatsu 6b7dca401c tracing: Allow gcov profiling on only ftrace subsystem
Add GCOV_PROFILE_FTRACE to allow gcov profiling on only files in ftrace
subsystem. This config option will be used for checking kselftest/ftrace
coverage.

Link: http://lkml.kernel.org/r/153483647755.32472.4746349899604275441.stgit@devbox

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-21 09:11:49 -04:00
Helge Deller dbf2a4b1ff parisc: Add hardware description to stack traces
Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-21 14:46:26 +02:00
Helge Deller 8801ccb9fa parisc: Fix boot failure of 64-bit kernel
Commit c8921d72e3 ("parisc: Fix and improve kernel stack unwinding")
broke booting of 64-bit kernels. On 64-bit kernels function pointers are
actually function descriptors which require dereferencing. In this patch
we instead declare functions in assembly code which are referenced from
C-code as external data pointers with the ENTRY() macro and thus can use
a simple external reference to the functions.

Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: c8921d72e3 ("parisc: Fix and improve kernel stack unwinding")
2018-08-21 14:32:44 +02:00
Kailang Yang 8a328ac1f9 ALSA: hda/realtek - Fix HP Headset Mic can't record
This patch will fix HP workstation Headset Mic not recording.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Tested-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-21 11:53:17 +02:00
Lorenzo Pieralisi c4347b0544 microblaze/PCI: Remove stale pcibios_align_resource() comment
commit 01cf9d524f ("microblaze/PCI: Support generic Xilinx AXI PCIe Host
Bridge IP driver")

and

commit ecf677c8dc ("PCI: Add a generic weak pcibios_align_resource()")

first patched then removed pcibios_align_resource() from the microblaze
architecture code but failed to remove the comment that was added to
it.

Remove it since it has now become stale and it is quite confusing.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bharat Kumar Gogada <bharatku@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-21 08:23:30 +02:00
Chao Yu 6aa58d8ad2 f2fs: readahead encrypted block during GC
During GC, for each encrypted block, we will read block synchronously
into meta page, and then submit it into current cold data log area.

So this block read model with 4k granularity can make poor performance,
like migrating non-encrypted block, let's readahead encrypted block
as well to improve migration performance.

To implement this, we choose meta page that its index is old block
address of the encrypted block, and readahead ciphertext into this
page, later, if readaheaded page is still updated, we will load its
data into target meta page, and submit the write IO.

Note that for OPU, truncation, deletion, we need to invalid meta
page after we invalid old block address, to make sure we won't load
invalid data from target meta page during encrypted block migration.

for ((i = 0; i < 1000; i++))
do {
        xfs_io -f /mnt/f2fs/dir/$i -c "pwrite 0 128k" -c "fsync";
} done

for ((i = 0; i < 1000; i+=2))
do {
        rm /mnt/f2fs/dir/$i;
} done

ret = ioctl(fd, F2FS_IOC_GARBAGE_COLLECT, 0);

Before:
              gc-6549  [001] d..1 214682.212797: block_rq_insert: 8,32 RA 32768 () 786400 + 64 [gc]
              gc-6549  [001] d..1 214682.212802: block_unplug: [gc] 1
              gc-6549  [001] .... 214682.213892: block_bio_queue: 8,32 R 67494144 + 8 [gc]
              gc-6549  [001] .... 214682.213899: block_getrq: 8,32 R 67494144 + 8 [gc]
              gc-6549  [001] .... 214682.213902: block_plug: [gc]
              gc-6549  [001] d..1 214682.213905: block_rq_insert: 8,32 R 4096 () 67494144 + 8 [gc]
              gc-6549  [001] d..1 214682.213908: block_unplug: [gc] 1
              gc-6549  [001] .... 214682.226405: block_bio_queue: 8,32 R 67494152 + 8 [gc]
              gc-6549  [001] .... 214682.226412: block_getrq: 8,32 R 67494152 + 8 [gc]
              gc-6549  [001] .... 214682.226414: block_plug: [gc]
              gc-6549  [001] d..1 214682.226417: block_rq_insert: 8,32 R 4096 () 67494152 + 8 [gc]
              gc-6549  [001] d..1 214682.226420: block_unplug: [gc] 1
              gc-6549  [001] .... 214682.226904: block_bio_queue: 8,32 R 67494160 + 8 [gc]
              gc-6549  [001] .... 214682.226910: block_getrq: 8,32 R 67494160 + 8 [gc]
              gc-6549  [001] .... 214682.226911: block_plug: [gc]
              gc-6549  [001] d..1 214682.226914: block_rq_insert: 8,32 R 4096 () 67494160 + 8 [gc]
              gc-6549  [001] d..1 214682.226916: block_unplug: [gc] 1

After:
              gc-5678  [003] .... 214327.025906: block_bio_queue: 8,32 R 67493824 + 8 [gc]
              gc-5678  [003] .... 214327.025908: block_bio_backmerge: 8,32 R 67493824 + 8 [gc]
              gc-5678  [003] .... 214327.025915: block_bio_queue: 8,32 R 67493832 + 8 [gc]
              gc-5678  [003] .... 214327.025917: block_bio_backmerge: 8,32 R 67493832 + 8 [gc]
              gc-5678  [003] .... 214327.025923: block_bio_queue: 8,32 R 67493840 + 8 [gc]
              gc-5678  [003] .... 214327.025925: block_bio_backmerge: 8,32 R 67493840 + 8 [gc]
              gc-5678  [003] .... 214327.025932: block_bio_queue: 8,32 R 67493848 + 8 [gc]
              gc-5678  [003] .... 214327.025934: block_bio_backmerge: 8,32 R 67493848 + 8 [gc]
              gc-5678  [003] .... 214327.025941: block_bio_queue: 8,32 R 67493856 + 8 [gc]
              gc-5678  [003] .... 214327.025943: block_bio_backmerge: 8,32 R 67493856 + 8 [gc]
              gc-5678  [003] .... 214327.025953: block_bio_queue: 8,32 R 67493864 + 8 [gc]
              gc-5678  [003] .... 214327.025955: block_bio_backmerge: 8,32 R 67493864 + 8 [gc]
              gc-5678  [003] .... 214327.025962: block_bio_queue: 8,32 R 67493872 + 8 [gc]
              gc-5678  [003] .... 214327.025964: block_bio_backmerge: 8,32 R 67493872 + 8 [gc]
              gc-5678  [003] .... 214327.025970: block_bio_queue: 8,32 R 67493880 + 8 [gc]
              gc-5678  [003] .... 214327.025972: block_bio_backmerge: 8,32 R 67493880 + 8 [gc]
              gc-5678  [003] .... 214327.026000: block_bio_queue: 8,32 WS 34123776 + 2048 [gc]
              gc-5678  [003] .... 214327.026019: block_getrq: 8,32 WS 34123776 + 2048 [gc]
              gc-5678  [003] d..1 214327.026021: block_rq_insert: 8,32 R 131072 () 67493632 + 256 [gc]
              gc-5678  [003] d..1 214327.026023: block_unplug: [gc] 1
              gc-5678  [003] d..1 214327.026026: block_rq_issue: 8,32 R 131072 () 67493632 + 256 [gc]
              gc-5678  [003] .... 214327.026046: block_plug: [gc]

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-20 23:13:42 -07:00
Jaegeuk Kim 6f8d445506 f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc
The f2fs_gc() called by f2fs_balance_fs() requires to be called outside of
fi->i_gc_rwsem[WRITE], since f2fs_gc() can try to grab it in a loop.

If it hits the miximum retrials in GC, let's give a chance to release
gc_mutex for a short time in order not to go into live lock in the worst
case.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-20 23:13:42 -07:00
Jaegeuk Kim 853137cef4 f2fs: fix performance issue observed with multi-thread sequential read
This reverts the commit - "b93f771 - f2fs: remove writepages lock"
to fix the drop in sequential read throughput.

Test: ./tiotest -t 32 -d /data/tio_tmp -f 32 -b 524288 -k 1 -k 3 -L
device: UFS

Before -
read throughput: 185 MB/s
total read requests: 85177 (of these ~80000 are 4KB size requests).
total write requests: 2546 (of these ~2208 requests are written in 512KB).

After -
read throughput: 758 MB/s
total read requests: 2417 (of these ~2042 are 512KB reads).
total write requests: 2701 (of these ~2034 requests are written in 512KB).

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-08-20 23:13:42 -07:00
Srikar Dronamraju 2ea6263068 powerpc/topology: Get topology for shared processors at boot
On a shared LPAR, Phyp will not update the CPU associativity at boot
time. Just after the boot system does recognize itself as a shared
LPAR and trigger a request for correct CPU associativity. But by then
the scheduler would have already created/destroyed its sched domains.

This causes
  - Broken load balance across Nodes causing islands of cores.
  - Performance degradation esp if the system is lightly loaded
  - dmesg to wrongly report all CPUs to be in Node 0.
  - Messages in dmesg saying borken topology.
  - With commit 051f3ca02e ("sched/topology: Introduce NUMA identity
    node sched domain"), can cause rcu stalls at boot up.

The sched_domains_numa_masks table which is used to generate cpumasks
is only created at boot time just before creating sched domains and
never updated. Hence, its better to get the topology correct before
the sched domains are created.

For example on 64 core Power 8 shared LPAR, dmesg reports

  Brought up 512 CPUs
  Node 0 CPUs: 0-511
  Node 1 CPUs:
  Node 2 CPUs:
  Node 3 CPUs:
  Node 4 CPUs:
  Node 5 CPUs:
  Node 6 CPUs:
  Node 7 CPUs:
  Node 8 CPUs:
  Node 9 CPUs:
  Node 10 CPUs:
  Node 11 CPUs:
  ...
  BUG: arch topology borken
       the DIE domain not a subset of the NUMA domain
  BUG: arch topology borken
       the DIE domain not a subset of the NUMA domain

numactl/lscpu output will still be correct with cores spreading across
all nodes:

  Socket(s):             64
  NUMA node(s):          12
  Model:                 2.0 (pvr 004d 0200)
  Model name:            POWER8 (architected), altivec supported
  Hypervisor vendor:     pHyp
  Virtualization type:   para
  L1d cache:             64K
  L1i cache:             32K
  NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,176-183,272-279,368-375,464-471
  NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,184-191,280-287,376-383,472-479
  NUMA node2 CPU(s): 16-23,48-55,80-87,112-119,192-199,288-295,384-391,480-487
  NUMA node3 CPU(s): 24-31,56-63,88-95,120-127,200-207,296-303,392-399,488-495
  NUMA node4 CPU(s):     208-215,304-311,400-407,496-503
  NUMA node5 CPU(s):     168-175,264-271,360-367,456-463
  NUMA node6 CPU(s):     128-135,224-231,320-327,416-423
  NUMA node7 CPU(s):     136-143,232-239,328-335,424-431
  NUMA node8 CPU(s):     216-223,312-319,408-415,504-511
  NUMA node9 CPU(s):     144-151,240-247,336-343,432-439
  NUMA node10 CPU(s):    152-159,248-255,344-351,440-447
  NUMA node11 CPU(s):    160-167,256-263,352-359,448-455

Currently on this LPAR, the scheduler detects 2 levels of Numa and
created numa sched domains for all CPUs, but it finds a single DIE
domain consisting of all CPUs. Hence it deletes all numa sched
domains.

To address this, detect the shared processor and update topology soon
after CPUs are setup so that correct topology is updated just before
scheduler creates sched domain.

With the fix, dmesg reports:

  numa: Node 0 CPUs: 0-7 32-39 64-71 96-103 176-183 272-279 368-375 464-471
  numa: Node 1 CPUs: 8-15 40-47 72-79 104-111 184-191 280-287 376-383 472-479
  numa: Node 2 CPUs: 16-23 48-55 80-87 112-119 192-199 288-295 384-391 480-487
  numa: Node 3 CPUs: 24-31 56-63 88-95 120-127 200-207 296-303 392-399 488-495
  numa: Node 4 CPUs: 208-215 304-311 400-407 496-503
  numa: Node 5 CPUs: 168-175 264-271 360-367 456-463
  numa: Node 6 CPUs: 128-135 224-231 320-327 416-423
  numa: Node 7 CPUs: 136-143 232-239 328-335 424-431
  numa: Node 8 CPUs: 216-223 312-319 408-415 504-511
  numa: Node 9 CPUs: 144-151 240-247 336-343 432-439
  numa: Node 10 CPUs: 152-159 248-255 344-351 440-447
  numa: Node 11 CPUs: 160-167 256-263 352-359 448-455

and lscpu also reports:

  Socket(s):             64
  NUMA node(s):          12
  Model:                 2.0 (pvr 004d 0200)
  Model name:            POWER8 (architected), altivec supported
  Hypervisor vendor:     pHyp
  Virtualization type:   para
  L1d cache:             64K
  L1i cache:             32K
  NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,176-183,272-279,368-375,464-471
  NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,184-191,280-287,376-383,472-479
  NUMA node2 CPU(s): 16-23,48-55,80-87,112-119,192-199,288-295,384-391,480-487
  NUMA node3 CPU(s): 24-31,56-63,88-95,120-127,200-207,296-303,392-399,488-495
  NUMA node4 CPU(s):     208-215,304-311,400-407,496-503
  NUMA node5 CPU(s):     168-175,264-271,360-367,456-463
  NUMA node6 CPU(s):     128-135,224-231,320-327,416-423
  NUMA node7 CPU(s):     136-143,232-239,328-335,424-431
  NUMA node8 CPU(s):     216-223,312-319,408-415,504-511
  NUMA node9 CPU(s):     144-151,240-247,336-343,432-439
  NUMA node10 CPU(s):    152-159,248-255,344-351,440-447
  NUMA node11 CPU(s):    160-167,256-263,352-359,448-455

Reported-by: Manjunatha H R <manjuhr1@in.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[mpe: Trim / format change log]
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-21 16:01:59 +10:00
Luke Dashjr d6ee76d3d3 powerpc64/ftrace: Include ftrace.h needed for enable/disable calls
this_cpu_disable_ftrace and this_cpu_enable_ftrace are inlines in
ftrace.h Without it included, the build fails.

Fixes: a4bc64d305 ("powerpc64/ftrace: Disable ftrace during kvm entry/exit")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Luke Dashjr <luke-jr+git@utopios.org>
Acked-by: Naveen N. Rao <naveen.n.rao at linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-21 15:58:34 +10:00
Linus Torvalds 778a33959a Mike Rapoport kindly fixed up ia64 to work with NO_BOOTMEM
-----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQQW3WBGcnu5yJnSXn0kTJLX0iGMLAUCW3s51hQcdG9ueS5sdWNr
 QGludGVsLmNvbQAKCRAkTJLX0iGMLJyWAQDyxUzXzvHeS0FWa1jigyz5z2rDjkPM
 hxl1dvz0CLXHjgEA4VyFtJWA7Jwn0dgMRPR5CSOad/bsDNejMR5Yzhpydw4=
 =sBdX
 -----END PGP SIGNATURE-----

Merge tag 'please-pull-noboot' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux

Pull ia64 NO_BOOTMEM conversion from Tony Luck:
 "Mike Rapoport kindly fixed up ia64 to work with NO_BOOTMEM"

* tag 'please-pull-noboot' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: switch to NO_BOOTMEM
  ia64: use mem_data to detect nodes' minimal and maximal PFNs
  ia64: remove unused num_dma_physpages member from 'struct early_node_data'
  ia64: contig/paging_init: reduce code duplication
2018-08-20 19:37:09 -07:00
Linus Torvalds 6b2edf27fe linux-kselftest-4.19-rc1
This Kselftest update for 4.19-rc1:
 
 - adds cgroup core selftests
 - fixes compile warnings in android ion test
 - fixes to bugs in exclude and skip paths in vDSO test
 - removes obsolete config options
 - adds missing .gitignore file
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAlt7LPsACgkQCwJExA0N
 QxwiUQ/8D1bMBeiZulHGqzwYEdMYv/Yt+IAxN4LY7TMD75b0XDzc3MArh5zo6/UB
 C6Hv08kKXSTrGHuOeNGOsvfzuUEaGDUeDGU0ehQIoOAPxuqp8LzhK2aCRH53oVaH
 kr/JatZaWLuLG/MXe+k8Tp2hR403x2IEYwf8ubVlxIRU7JQNkKyUIKfwcS7OSIcV
 Ij9FDyJ/Rp21wAFj69JWi9zKbBBCGNwytpaUZo+aPnaOsAutqQ+MVy2M3NVLTBgB
 E7u43iWO84AD5BX/Hea0MpgqvSwWbv/Qo+SScROwRtrievGe9+dWiR81ImqmzrOb
 GuBdivXB2zDlmQq2KW4IBKWtZO3wTgXDYgi+cWgK/qq3iJOVe/eI7KXmOwilxgSw
 r+8Ar3oAyMfHPvt2Yg/SDCAg1UCsjaJ6a90LoNg4hfGIUzP8QX08m9w/IE6bgCDM
 k9iS0rfUmha2kPM0pJT/D4TVFVacUu5/scI0hColcPB/L/eFgHmxcJYYRD6crPJZ
 Y/hGqpV8liMsjbFofk2Eo8TbOhZBrPo3Ikoo48BfjCc3wM/tt8m/Ych3d79Xq8vg
 /7N1jccmqER1mPqaQBPldV4b4Zs7sg4HIV4gsBAbMBvPpAVRHHmiCKQyww3SaLTA
 n6IhuTW2zJq+7dV09a9WjOB30Koz+ln/GCjtQyvukOwV1fnShtk=
 =dH5Q
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:

 - add cgroup core selftests

 - fix compile warnings in android ion test

 - fix to bugs in exclude and skip paths in vDSO test

 - remove obsolete config options

 - add missing .gitignore file

* tag 'linux-kselftest-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Fix kprobe string testcase to not probe notrace function
  selftests: mount: remove no longer needed config option
  selftests: cgroup: add gitignore file
  Add cgroup core selftests
  selftests: vDSO - fix to return KSFT_SKIP when test couldn't be run
  selftests: vDSO - fix to exclude x86 test on non-x86 platforms
  selftests/android: initialize heap_type to avoid compiling warning
2018-08-20 19:02:17 -07:00
Linus Torvalds 7140ad3898 Updates for v4.19:
- Restructure of lockdep and latency tracers
 
    This is the biggest change. Joel Fernandes restructured the hooks
    from irqs and preemption disabling and enabling. He got rid of
    a lot of the preprocessor #ifdef mess that they caused.
 
    He turned both lockdep and the latency tracers to use trace events
    inserted in the preempt/irqs disabling paths. But unfortunately,
    these started to cause issues in corner cases. Thus, parts of the
    code was reverted back to where lockde and the latency tracers
    just get called directly (without using the trace events).
    But because the original change cleaned up the code very nicely
    we kept that, as well as the trace events for preempt and irqs
    disabling, but they are limited to not being called in NMIs.
 
  - Have trace events use SRCU for "rcu idle" calls. This was required
    for the preempt/irqs off trace events. But it also had to not
    allow them to be called in NMI context. Waiting till Paul makes
    an NMI safe SRCU API.
 
  - New notrace SRCU API to allow trace events to use SRCU.
 
  - Addition of mcount-nop option support
 
  - SPDX headers replacing GPL templates.
 
  - Various other fixes and clean ups.
 
  - Some fixes are marked for stable, but were not fully tested
    before the merge window opened.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
 c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
 =vgEr
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - Restructure of lockdep and latency tracers

   This is the biggest change. Joel Fernandes restructured the hooks
   from irqs and preemption disabling and enabling. He got rid of a lot
   of the preprocessor #ifdef mess that they caused.

   He turned both lockdep and the latency tracers to use trace events
   inserted in the preempt/irqs disabling paths. But unfortunately,
   these started to cause issues in corner cases. Thus, parts of the
   code was reverted back to where lockdep and the latency tracers just
   get called directly (without using the trace events). But because the
   original change cleaned up the code very nicely we kept that, as well
   as the trace events for preempt and irqs disabling, but they are
   limited to not being called in NMIs.

 - Have trace events use SRCU for "rcu idle" calls. This was required
   for the preempt/irqs off trace events. But it also had to not allow
   them to be called in NMI context. Waiting till Paul makes an NMI safe
   SRCU API.

 - New notrace SRCU API to allow trace events to use SRCU.

 - Addition of mcount-nop option support

 - SPDX headers replacing GPL templates.

 - Various other fixes and clean ups.

 - Some fixes are marked for stable, but were not fully tested before
   the merge window opened.

* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  tracing: Fix SPDX format headers to use C++ style comments
  tracing: Add SPDX License format tags to tracing files
  tracing: Add SPDX License format to bpf_trace.c
  blktrace: Add SPDX License format header
  s390/ftrace: Add -mfentry and -mnop-mcount support
  tracing: Add -mcount-nop option support
  tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
  tracing: Handle CC_FLAGS_FTRACE more accurately
  Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  Uprobes: Simplify uprobe_register() body
  tracepoints: Free early tracepoints after RCU is initialized
  uprobes: Use synchronize_rcu() not synchronize_sched()
  tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
  ftrace: Remove unused pointer ftrace_swapper_pid
  tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing/irqsoff: Handle preempt_count for different configs
  tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing: irqsoff: Account for additional preempt_disable
  trace: Use rcu_dereference_raw for hooks from trace-event subsystem
  tracing/kprobes: Fix within_notrace_func() to check only notrace functions
  ...
2018-08-20 18:32:00 -07:00
Linus Torvalds 0a78ac4b9b The main things are support for cephx v2 authentication protocol and
basic support for rbd images within namespaces (myself).  Also included
 y2038 conversion patches from Arnd, a pile of miscellaneous fixes from
 Chengguang and Zheng's feature bit infrastructure for the filesystem.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlt62CkTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzizfhB/0c/rz6frunc6EcZMWuBNzlOIOktJ/m
 MEbPGjCxMAsmidO1rqHHYF4iEN5hr+3AWTbtIL2m6wkqYVdg3FjmNaAYB27AdQMG
 kH9bLfrKIew72/NZqXfm25yjY/86kIt8t91kay4Lchc97tSYhnFSnku7iAX2HTND
 TMhq/1O/GvEyw/RmqnenJEQqFJvKnfgPPQm6W8sM2bH0T5j+EXmDT/Rv+90LogFR
 J4+pZkHqDfvyMb1WJ5MkumohytbRVzRNKcMpOvjquJSqUgtgZa2JdrIsypDqSNKY
 nUT6jGGlxoSbHCqRwDJoFEJOlh5A9RwKqYxNuM2a/vs9u7HpvdCK/Iah
 =AtgY
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The main things are support for cephx v2 authentication protocol and
  basic support for rbd images within namespaces (myself).

  Also included are y2038 conversion patches from Arnd, a pile of
  miscellaneous fixes from Chengguang and Zheng's feature bit
  infrastructure for the filesystem"

* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
  ceph: don't drop message if it contains more data than expected
  ceph: support cephfs' own feature bits
  crush: fix using plain integer as NULL warning
  libceph: remove unnecessary non NULL check for request_key
  ceph: refactor error handling code in ceph_reserve_caps()
  ceph: refactor ceph_unreserve_caps()
  ceph: change to void return type for __do_request()
  ceph: compare fsc->max_file_size and inode->i_size for max file size limit
  ceph: add additional size check in ceph_setattr()
  ceph: add additional offset check in ceph_write_iter()
  ceph: add additional range check in ceph_fallocate()
  ceph: add new field max_file_size in ceph_fs_client
  libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
  libceph: check authorizer reply/challenge length before reading
  libceph: implement CEPHX_V2 calculation mode
  libceph: add authorizer challenge
  libceph: factor out encrypt_authorizer()
  libceph: factor out __ceph_x_decrypt()
  libceph: factor out __prepare_write_connect()
  libceph: store ceph_auth_handshake pointer in ceph_connection
  ...
2018-08-20 18:26:55 -07:00
Linus Torvalds bfebeb1672 RTC for 4.19
Subsystem:
  - new helpers to add custom sysfs attributes
  - struct rtc_task removal along with rtc_irq_register/rtc_irq_unregister
  - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore
 
 Drivers:
  - armada38x: reset after rtc power loss
  - ds1307: now supports m41t11
  - isl1208: now supports isl1219 and tamper detection
  - pcf2127: internal SRAM support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlt7L0oACgkQAyWl4gNJ
 NJIB3w/+Mo5moMRnjDe+MiFzbLxe9lv3Wtdmqq0AdHQpxxOVu7LQ2O5oHQBjdMsz
 nCYPy7sIWBXzJWI+X5OByukZheWmhmsORtZw14MrmhMCY7Xt0lCHAsmHzs0yyqXT
 KnF0RL9HtSfYr4ftcOGrnY/8VZCPjI0I08AP1naVYTcX34PPGRL7KWwyxYBuwyOL
 Za2eH8snhI/QkEKx9enPsXeMvB87hkhCEFM0oTyyS5bY6L68PGzErWO4J8mWvFSH
 w1GWOvaNAg74lSe1Kgq9QtXRmhl67vwPLUX3QdxKb0HRuEInfdwDifdwU14HixE/
 t2Vj0HNpn9xZwRhCvC/LnwtQGr+53R2Ase5NSwpZvpvM8e2LgoN/W7NxoD4BGSMi
 Aal0lPUFLbzayFQC5MOIZVazrf7PzWowSFNWO66uQR3Cmt/voGtRDGbfTPHn6nvs
 kLl5kb8j0KdJOsVeDDmnVmEU0ZEmGZSqxX7oE0QiL8QMim76yZtqwy1Y13xE5nI9
 6fDA2MyQADNn5JDFMC/deL/d8hgI4Yv19tNOxNuj9yW/wFbctCG4tkremQoXHZ4n
 zLg/pdS2/iHSGKYW6ejWIS7VxwEWDbJp60Tx02LWQz40xXiUtgYh0/eYCzdfBVU/
 wXla023DFerg1irguOrSPTLLDddvOz8fW6Gh7DMT+nxjuxdh+lw=
 =cAQ9
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "It is now possible to add custom sysfs attributes while avoiding a
  possible race condition. Unused code has been removed resulting in a
  nice reduction of the code base. And more drivers have been switched
  to SPDX by their maintainers.

 Summary:

  Subsystem:
   - new helpers to add custom sysfs attributes
   - struct rtc_task removal along with rtc_irq_[un]register()
   - rtc_irq_set_state and rtc_irq_set_freq are not exported anymore

  Drivers:
   - armada38x: reset after rtc power loss
   - ds1307: now supports m41t11
   - isl1208: now supports isl1219 and tamper detection
   - pcf2127: internal SRAM support"

* tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
  rtc: ds1307: simplify hwmon config
  rtc: s5m: Add SPDX license identifier
  rtc: maxim: Add SPDX license identifiers
  rtc: isl1219: add device tree documentation
  rtc: isl1208: set ev-evienb bit from device tree
  rtc: isl1208: Add "evdet" interrupt source for isl1219
  rtc: isl1208: add support for isl1219 with tamper detection
  rtc: sysfs: facilitate attribute add to rtc device
  rtc: remove struct rtc_task
  char: rtc: remove task handling
  rtc: pcf85063: preserve control register value between stop and start
  rtc: sh: remove unused variable rtc_dev
  rtc: unexport rtc_irq_set_*
  rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
  rtc: remove irq_task and irq_task_lock
  rtc: remove rtc_irq_register/rtc_irq_unregister
  rtc: sh: remove dead code
  rtc: sa1100: don't set PIE frequency
  rtc: ds1307: support m41t11 variant
  rtc: ds1307: fix data pointer to m41t0
  ...
2018-08-20 16:30:27 -07:00
Linus Torvalds 3933ec73cd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching updates from Jiri Kosina:
 "Code cleanups from Kamalesh Babulal"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: Validate module/old func name length
  livepatch: Remove reliable stacktrace check in klp_try_switch_task()
2018-08-20 16:10:47 -07:00
Linus Torvalds 7a324b3f05 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:

 - touch_max detection improvements and quirk handling fixes in wacom
   driver from Jason Gerecke and Ping Cheng

 - Palm rejection from Dmitry Torokhov and _dial support from Benjamin
   Tissoires for hid-multitouch driver

 - Low voltage support for i2c-hid driver from Stephen Boyd

 - Guitar-Hero support from Nicolas Adenis-Lamarre

 - other assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (40 commits)
  HID: intel_ish-hid: tx_buf memory leak on probe/remove
  HID: intel-ish-hid: Prevent loading of driver on Mehlow
  HID: cougar: Add support for the Cougar 500k Gaming Keyboard
  HID: cougar: make compare_device_paths reusable
  HID: intel-ish-hid: remove redundant variable num_frags
  HID: multitouch: handle palm for touchscreens
  HID: multitouch: touchscreens also use confidence reports
  HID: multitouch: report MT_TOOL_PALM for non-confident touches
  HID: microsoft: support the Surface Dial
  HID: core: do not upper bound the collection stack
  HID: input: enable Totem on the Dell Canvas 27
  HID: multitouch: remove one copy of values
  HID: multitouch: ditch mt_report_id
  HID: multitouch: store a per application quirks value
  HID: multitouch: Store per collection multitouch data
  HID: multitouch: make sure the static list of class is not changed
  input: add MT_TOOL_DIAL
  HID: elan: Add support for touchpad on the Toshiba Click Mini L9W
  HID: elan: Add USB-id for HP x2 10-n000nd touchpad
  HID: elan: Add a flag for selecting if the touchpad has a LED
  ...
2018-08-20 15:59:01 -07:00
Linus Torvalds 61c4fc1eaf - Core Frameworks
- Remove unused/obsolete code/comments
 
  - New Functionality
    - Allow less granular brightness specification for high-res PWMs; pwm_bl
    - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl
 
  - Fix-ups
    - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl
 
  - Bug Fixes
    - Fix uninitialised variable; pwm_bl
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlt6gwcACgkQUa+KL4f8
 d2EKfA//Vbomk1W0DtqBuyKUask0gcaunuICWtKZG5TnUOJctp7Jmno4UrCmkvHD
 FDoOJcq3LoI/xfh68tEhvUHqYbFQrOPJC0K8jCszVzdACUsz1+Gw1oCgmQUPGg9r
 TG9QlQZuimbqWzmH2xQquH2H6yVe+2xJZ1U6X4KPLP0OKkSwrOfm6sYrV7Qus+uw
 1T77j8s9c5n+qiyAQt7vUBbwBDAhn33QMNqLU72QR6KmJ4A8VS8nyPFTZGXeX8nz
 WvrpJ3wqKRHXW2Fe4YKzs4fXMIDJpjQn8Ls8vn8ESRL+Pd+UvGsLUyZ5uYG9Opht
 NN7UGlSRjRdaX3NiiFH8/XS16bnQk2lsrVjOIfvaSmZbMCND2UAc7M1xkxhBG6h/
 LKwi9RJiTxYswf/XgSAgMfv7Ge1CCIAZljMnDuJZmMEW49tKkAbc12tNypw/yujX
 yg0ynHb1yBGUM4EbEhuhfgLx067ARXv/fuvMdfxcUlqG1RBhrpA/xw4OueILemwM
 dJE9IwCRChWxgnlq2Oirnt4pPjR1k5tui4pR5qXvULm8J2PLLSrBM3WUlbcE/m0f
 jxkSuEAWLvyd+dPwl1dNm9uLSho8N8TR2f921AUeyFmFbozPeSEGUiAeMCY0ly5M
 IUg5caqVF3NvkKlW+lmL9Ik8Gd6j1JGEnaJE8NUKRzdu4ZLev6k=
 =C/pI
 -----END PGP SIGNATURE-----

Merge tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Remove unused/obsolete code/comments

  New Functionality:
   - Allow less granular brightness specification for high-res PWMs; pwm_bl
   - Align brightness {inc,dec}rements with that perceived by the human-eye; pwm_bl

  Fix-ups:
   - Prepare for the introduction of -Wimplicit-fall-through; adp8860_bl

  Bug Fixes:
   - Fix uninitialised variable; pwm_bl"

* tag 'backlight-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Fix uninitialized variable
  backlight: adp8860: Mark expected switch fall-through
  backlight: Remove obsolete comment for ->state
  dt-bindings: pwm-backlight: Move brightness-levels to optional
  backlight: pwm_bl: Compute brightness of LED linearly to human eye
  dt-bindings: pwm-backlight: Add a num-interpolation-steps property
  backlight: pwm_bl: Linear interpolation between brightness-levels
2018-08-20 15:41:37 -07:00
Linus Torvalds 532c2b926d - New Drivers
- Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
    - Add ChromeOS EC CEC driver
    - Add ROHM BD71837 PMIC driver
 
  - New Device Support
    - Add support for Dialog Semi DA9063L PMIC variant to DA9063
    - Add support for Intel Ice Lake to Intel-PLSS-PCI
    - Add support for X-Powers AXP806 to AXP20x
 
  - New Functionality
    - Add support for USB Charging to the ChromeOS Embedded Controller
    - Add support for HDMI CEC to the ChromeOS Embedded Controller
    - Add support for HDMI CEC to Intel HDMI
    - Add support for accessory detection to Madera devices
    - Allow individual pins to be configured via DT' wlf,csnaddr-pd
    - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp
 
  - Fix-ups
    - Trivial renaming/spelling fixes; cros_ec, da9063-*
    - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
    - Transition to helper macros/functions; da9063-*
    - Constify; kempld-core
    - Improve error path/messages; wm8994-core
    - Disable IRQs locally instead of relying on USB subsystem; dln2
    - Remove unused code; rave-sp
    - New exports; sec-core
 
  - Bug Fixes
    - Fix possible false I2C transaction error; arizona-core
    - Fix declared memory area size; hi655x-pmic
    - Fix checksum type; rave-sp
    - Fix incorrect default serial port configuration: rave-sp
    - Fix incorrect coherent DMA mask for sub-devices; sm501
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlt6fm8ACgkQUa+KL4f8
 d2H8qA/8CLIKKEyc3CiQIF4LqmOPn+P20gSlnNdDFGHV+ZpVryL6qKItDy76nbQS
 +GrPCmhADDn7N224ENlv4TYsB1txr7iZvyNr6W7F0fbdTLq5Fl2+6WIB3NnopPPK
 MGhzR2jikfuYGwEG+BG3efvTnrjoi+NPbNPHDdoegOiy/Q1R8PhjMKh10xWo3pgG
 0TeZVg61ztfewAiebieMixNz+ehzFKK959Lsa7neV2ZsstBbM8B44UpXmLF5JLYe
 SR1ai5etSPBLxEeTXxlE+oG+fnDWk9Eyile7z1Nwg4et9OiXdyqAXBoA+BNDj2N2
 N8vHuU79pSra+XGbka/7Kyz8sXjb4u92mJlc1wDcsCF+hX+wGEmwkEUb0S4YEtOH
 1POi4YuIq0WF1oLSgCla/Pui0OQPIZaT31XhInYLV7rAX+MPgH0cUuLDsmzcg4ut
 C6RvoSzWiGA2JVqlALExSDtAkWUoZLjYkqnPYmZwGs25xsGUqJmiw1E73HI0OWr/
 EJuKQbeq/bOmRPqbbwO7z7peZJHOt6j344VCXBdP/sB7d/lR1sEGpxC03MIogHrA
 BuiPyfDXTF1NB/+ZPBFbSG2Xhcg51yL4ddRa1sMntP6J4Ht1dW7TOpLI21Yu3eRp
 jzKnA9DRa/LPUvoR1y+C2LxDeBcT5qFMg4mZedOgio/C0vCXvus=
 =4Yj4
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...
2018-08-20 15:38:44 -07:00
Linus Torvalds 8786583db5 * An urgent fix for a NULL ptr deref on machines with LRDDR4 DIMMs, from Takashi Iwai.
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAlt6cLsACgkQEsHwGGHe
 VUov2Q/9F/uvMJBy/ZXnBgbR1+VmeuZeKMIpcw5LMSE3JEnyodtcF8fPM+KCTtRJ
 WuiulsI/zc+Y4noVJCPbo64uOdiOiMP0vz9EjVxx/LvFIMczTPIG160LNV/N8Hf/
 reKsEIfHdr5q1cQgWiy+1gvDuCztb5Mwp5pFkG4EPPeT6lWc8sBfuX77mVxaq0/5
 5ru+8id1hEZ9Y8lelpeAraTiBMlauKgFwFOdS4Gubs6y5hBJSG7nOfwSmVxcBPOS
 5Qfj495CV/Yf7lQ1eqYM2qFKEjSFdxmIA0N/jNamadWKvmvCbjsTCb7Z2cOm+1ce
 3SZmzpZU+b10BYE0jI1eprQNKiQl9fw4MZ7ePHAWoobhvntSIbyN5n7KIshlN+Ps
 cQHGD3UIhi3SRw4Py0oI1OZmTenWqAxtvGG9WN+OMMFwGpxdOaiViyxWyNTXDlWj
 ynjUcXctolOj9ji/QyMWXjjhTWBGInkqHhooadzDllNEJoBDQU84Kgy343V2Cbmg
 Z++1unQLhJszgD4Owv3l/1NNawQXRn2l7RNqJn/zUahlcJ+ML5zRBP4IF4Efxp6M
 IkIhu3vKya+aUTSeksuoxYGMRdpY6spQHpuJL2yW95I+hnrLNQzkCPnNm0SD6pZa
 jDNXB/+XvtsYB6fX1qwJZJXtXz8ffIMANn7O9W+55yHSH0tVAtI=
 =uULC
 -----END PGP SIGNATURE-----

Merge tag 'edac_fixes_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC fix from Borislav Petkov:
 "An urgent fix for a NULL ptr deref on machines with LRDDR4 DIMMs, from
  Takashi Iwai"

* tag 'edac_fixes_for_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]
2018-08-20 15:28:54 -07:00
Joe Perches cafa0010cd Raise the minimum required gcc version to 4.6
Various architectures fail to build properly with older versions of the
gcc compiler.

An example from Guenter Roeck in thread [1]:
>
>   In file included from ./include/linux/mm.h:17:0,
>                    from ./include/linux/pid_namespace.h:7,
>                    from ./include/linux/ptrace.h:10,
>                    from arch/openrisc/kernel/asm-offsets.c:32:
>   ./include/linux/mm_types.h:497:16: error: flexible array member in otherwise empty struct
>
> This is just an example with gcc 4.5.1 for or32. I have seen the problem
> with gcc 4.4 (for unicore32) as well.

So update the minimum required version of gcc to 4.6.

[1] https://lore.kernel.org/lkml/20180814170904.GA12768@roeck-us.net/

Miscellanea:

 - Update Documentation/process/changes.rst

 - Remove and consolidate version test blocks in compiler-gcc.h for
   versions lower than 4.6

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-20 14:12:38 -07:00
Max Filippov 35d231db53 Merge branch 'xtensa-dma-fixes' (early part) into xtensa-fixes
This switches xtensa arch to the generic noncoherent direct mapping
operations, adds support for DMA_ATTR_NO_KERNEL_MAPPING attribute and
allows for platform-specific handling of coherent memory.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 13:24:24 -07:00
Max Filippov bfd5bb6f90 xtensa: add test_kc705_be variant
test_kc705_be is a big-endian Xtensa core with HiFi2 instructions.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 12:34:45 -07:00
Max Filippov 0c692569ce xtensa: clean up boot-elf/bootstrap.S
Drop unneeded headers, rewrite literal definitions with .literal.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 12:28:06 -07:00
Max Filippov baac1d36d1 xtensa: make bootparam parsing optional
A kernel may not need any boot parameters from the bootloader, allow
disabling bootparam parsing in that case.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 12:28:05 -07:00
Max Filippov 8b5163eb98 xtensa: drop variant IRQ support
If an xtensa core provides an additional IRQ controller it should be
treated as a separate piece of hardware and be driven by an irqchip
driver.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 12:28:05 -07:00
Max Filippov fc862ee997 xtensa: drop unneeded platform/hardware.h headers
platform/hardware.h no longer supply any information for processor.h,
vectors.h, setup.c or vmlinux.lds.S, don't include it.
This header is now empty in the platforms/iss, so remove it altogether.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 12:28:04 -07:00
Max Filippov 994fa1c83d xtensa: move PLATFORM_NR_IRQS to Kconfig
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 12:28:04 -07:00
Max Filippov aea731c81f xtensa: rework {CONFIG,PLATFORM}_DEFAULT_MEM_START
Drop PLATFORM_DEFAULT_MEM_START from the platform/hardware.h headers.
Provide definition of CONFIG_DEFAULT_MEM_START always, allow changing it
only in noMMU configurations when PLATFORM_WANT_DEFAULT_MEM is selected.
Change prompt and description so that it's clear that it controls
PAGE_OFFSET and PHYS_OFFSET.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 12:28:03 -07:00
Max Filippov f79e4d5f92 xtensa: drop unused {CONFIG,PLATFORM}_DEFAULT_MEM_SIZE
Now that noMMU cache attributes are set up separately drop no longer
used macro PLATFORM_DEFAULT_MEM_SIZE and config symbol
CONFIG_DEFAULT_MEM_SIZE used for setting it.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-08-20 12:27:52 -07:00
Tony Luck cc26ebbebd ia64: Fix kernel BUG at lib/ioremap.c:72!
Commit 0bbf47eab4 ("ia64: use asm-generic/io.h") results in a BUG
while booting ia64.  This is because asm-generic/io.h defines
PCI_IOBASE, which results in the function acpi_pci_root_remap_iospace()
doing a lot of unnecessary (and wrong) things.

I'd suggested an #if !CONFIG_IA64 in the functon, but Arnd suggested
keeping the fix inside the arch/ia64 tree.

Fixes: 0bbf47eab4 ("ia64: use asm-generic/io.h")
Suggested-by: Arnd Bergman <arnd@arndb.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-20 12:22:48 -07:00
Juergen Gross 75f2d3a0ce x86/xen: enable early use of set_fixmap in 32-bit Xen PV guest
Commit 7b25b9cb0d ("x86/xen/time: Initialize pv xen time in
init_hypervisor_platform()") moved the mapping of the shared info area
before pagetable_init(). This breaks booting as 32-bit PV guest as the
use of set_fixmap isn't possible at this time on 32-bit.

This can be worked around by populating the needed PMD on 32-bit
kernel earlier.

In order not to reimplement populate_extra_pte() using extend_brk()
for allocating new page tables extend alloc_low_pages() to do that in
case the early page table pool is not yet available.

Fixes: 7b25b9cb0d ("x86/xen/time: Initialize pv xen time in init_hypervisor_platform()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20 14:46:26 -04:00
Juergen Gross 00f53f758d xen: remove unused hypercall functions
Remove Xen hypercall functions which are used nowhere in the kernel.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20 14:46:18 -04:00
Juergen Gross df11b6912f x86/xen: remove unused function xen_auto_xlated_memory_setup()
xen_auto_xlated_memory_setup() is a leftover from PVH V1. Remove it.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20 14:46:18 -04:00
Jan Beulich 166deb0f0b xen/ACPI: don't upload Px/Cx data for disabled processors
This is unnecessary and triggers a warning in the hypervisor.

Often systems have more processor entries in their ACPI tables than are
actually installed/active. The ACPI_STA_DEVICE_PRESENT bit cannot be
reliably used, but the ACPI_MADT_ENABLED bit can. In order to not
introduce new functions in the main ACPI processor driver code, simply
use acpi_get_phys_id(), which does more than we need, but which checks
the MADT enabled bit in the process. Any CPU for which we can't
determine the APIC ID is unlikely to work properly anyway, so the extra
checks done by acpi_get_phys_id() should do no harm.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20 14:46:18 -04:00
Jan Beulich 71dc056359 x86/Xen: further refine add_preferred_console() invocations
As the sequence of invocations matters, add "tty" only after "hvc" when
a VGA console is available (which is often the case for Dom0, but hardly
ever for DomU).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20 14:46:18 -04:00
Jan Beulich f76c318c77 xen/mcelog: eliminate redundant setting of interface version
This already gets done in HYPERVISOR_mca().

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20 14:46:18 -04:00
Jan Beulich 2197082afd x86/Xen: mark xen_setup_gdt() __init
Its only caller is __init, so to avoid section mismatch warnings when a
compiler decides to not inline the function marke this function so as
well. Take the opportunity and also make the function actually use its
argument: The sole caller passes in zero anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20 14:46:18 -04:00
Palmer Dabbelt 7a3b1bf70b
RISC-V: Fix sys_riscv_flush_icache
This contains a pair of patches that together fix sys_riscv_flush_icache
on all systems:

* The first enables sys_riscv_flush_icache() for non-SMP systems.
* The second fixes a bug in our syscall header that caused
  sys_riscv_flush_icache to never get generated.
2018-08-20 11:32:10 -07:00
Deepa Dinamani 66eb957df4
riscv: Delete asm/compat.h
riscv does not enable CONFIG_COMPAT in default configurations:
defconfig, allmodconfig and allnoconfig.
Remove the asm/compat.h as it does not seem to add any value to
the architecture without CONFIG_COMPAT.

Now that time compat syscalls are being reused in non CONFIG_COMPAT
modes, asm-generic/compat.h provides definitions for riscv 32 bit
mode.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: palmer@sifive.com
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-20 11:25:35 -07:00
Palmer Dabbelt e45c7aca49
RISC-V: Don't use a global include guard for uapi/asm/syscalls.h
This file is expected to be included multiple times in the same file in
order to allow the __SYSCALL macro to generate system call tables.  With
a global include guard we end up missing __NR_riscv_flush_icache in the
syscall table, which results in icache flushes that escape the vDSO call
to not actually do anything.

The fix is to move to per-#define include guards, which allows the
system call tables to actually be populated.  Thanks to Macrus Comstedt
for finding and fixing the bug!

Cc: Marcus Comstedt <marcus@mc.pp.se>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-20 10:55:24 -07:00
Palmer Dabbelt 7847e7052f
RISC-V: Define sys_riscv_flush_icache when SMP=n
This would be necessary to make non-SMP builds work, but there is
another error in the implementation of our syscall linkage that actually
just causes sys_riscv_flush_icache to never build.  I've build tested
this on allnoconfig and allnoconfig+SMP=y, as well as defconfig like
normal.

CC: Christoph Hellwig <hch@infradead.org>
CC: Guenter Roeck <linux@roeck-us.net>
In-Reply-To: <20180809055830.GA17533@infradead.org>
In-Reply-To: <20180809132612.GA31058@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-20 10:55:24 -07:00
Michael J. Ruhl c513de490f IB/hfi1: Invalid NUMA node information can cause a divide by zero
If the system BIOS does not supply NUMA node information to the
PCI devices, the NUMA node is selected by choosing the current
node.

This can lead to the following crash:

divide error: 0000 SMP
CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G          IOE
------------   3.10.0-693.21.1.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS
SE5C610.86B.01.01.0005.101720141054 10/17/2014
Workqueue: events work_for_cpu_fn
task: ffff880174480fd0 ti: ffff880174488000 task.ti: ffff880174488000
RIP: 0010: [<ffffffffc020ac69>] hfi1_dev_affinity_init+0x129/0x6a0 [hfi1]
RSP: 0018:ffff88017448bbf8  EFLAGS: 00010246
RAX: 0000000000000011 RBX: ffff88107ffba6c0 RCX: ffff88085c22e130
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880824ad0000
RBP: ffff88017448bc48 R08: 0000000000000011 R09: 0000000000000002
R10: ffff8808582b6ca0 R11: 0000000000003151 R12: ffff8808582b6ca0
R13: ffff8808582b6518 R14: ffff8808582b6010 R15: 0000000000000012
FS:  0000000000000000(0000) GS:ffff88085ec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007efc707404f0 CR3: 0000000001a02000 CR4: 00000000001607f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
 hfi1_init_dd+0x14b3/0x27a0 [hfi1]
 ? pcie_capability_write_word+0x46/0x70
 ? hfi1_pcie_init+0xc0/0x200 [hfi1]
 do_init_one+0x153/0x4c0 [hfi1]
 ? sched_clock_cpu+0x85/0xc0
 init_one+0x1b5/0x260 [hfi1]
 local_pci_probe+0x4a/0xb0
 work_for_cpu_fn+0x1a/0x30
 process_one_work+0x17f/0x440
 worker_thread+0x278/0x3c0
 ? manage_workers.isra.24+0x2a0/0x2a0
 kthread+0xd1/0xe0
 ? insert_kthread_work+0x40/0x40
 ret_from_fork+0x77/0xb0
 ? insert_kthread_work+0x40/0x40

If the BIOS is not supplying NUMA information:
  - set the default table count to 1 for all possible nodes
  - select node 0 (instead of current NUMA) node to get consistent
    performance
  - generate an error indicating that the BIOS should be upgraded

Reviewed-by: Gary Leshner <gary.s.leshner@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-20 10:45:48 -06:00
Jiri Kosina badf58a272 Merge branch 'for-4.19/upstream' into for-linus 2018-08-20 18:33:50 +02:00
Gustavo A. R. Silva b639186ffe futex: Mark expected switch fall-throughs
In preparation of enabling -Wimplicit-fallthrough, mark switch cases which
fall through.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Link: https://lkml.kernel.org/r/20180816172124.GA2407@embeddedor.com
2018-08-20 18:23:00 +02:00
Dan Williams c953cc987a libnvdimm, pmem: Restore page attributes when clearing errors
Use clear_mce_nospec() to restore WB mode for the kernel linear mapping
of a pmem page that was marked 'HWPoison'. A page with 'HWPoison' set
has also been marked UC in PAT (page attribute table) via
set_mce_nospec() to prevent speculative retrievals of poison.

The 'HWPoison' flag is only cleared when overwriting an entire page.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2018-08-20 09:22:45 -07:00
Dan Williams 284ce4011b x86/memory_failure: Introduce {set, clear}_mce_nospec()
Currently memory_failure() returns zero if the error was handled. On
that result mce_unmap_kpfn() is called to zap the page out of the kernel
linear mapping to prevent speculative fetches of potentially poisoned
memory. However, in the case of dax mapped devmap pages the page may be
in active permanent use by the device driver, so it cannot be unmapped
from the kernel.

Instead of marking the page not present, marking the page UC should
be sufficient for preventing poison from being pre-fetched into the
cache. Convert mce_unmap_pfn() to set_mce_nospec() remapping the page as
UC, to hide it from speculative accesses.

Given that that persistent memory errors can be cleared by the driver,
include a facility to restore the page to cacheable operation,
clear_mce_nospec().

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: <linux-edac@vger.kernel.org>
Cc: <x86@kernel.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2018-08-20 09:22:45 -07:00