mirror of https://gitee.com/openkylin/linux.git
2282 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
3476195651 |
There's not much to see in the core framework this time around. Instead the
majority of the diff is the normal collection of driver additions for new SoCs
and non-critical clk data fixes and updates. The framework must be middle aged.
The two biggest directories in the diffstat show that the Qualcomm and Unisoc
support added a handful of big drivers for new SoCs but that's not really the
whole story because those new drivers tend to add large numbers of lines of clk
data. There's a handful of AT91 clk drivers added this time around too and a
bunch of improvements to drivers like the i.MX driver. All around lots of
updates and fixes in various clk drivers which is good to see.
The core framework has only one real major change which has been baking in next
for the past couple months. It fixes the framework so that it stops caching a
clk's phase when the phase clk_op returns an error. Before this change we would
consider some negative errno as a phase and that just doesn't make sense.
Core:
- Don't show clk phase when it is invalid
New Drivers:
- Add support for Unisoc SC9863A clks
- Qualcomm SM8250 RPMh and MSM8976 RPM clks
- Qualcomm SM8250 Global Clock Controller (GCC) support
- Qualcomm SC7180 Modem Clock Controller (MSS CC) support
- EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs
- Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs
Updates:
- GPU GX GDSC support on Qualcomm sc7180
- Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers
- A series from Anson to convert i.MX8 clock bindings to json-schema
- Update i.MX pll14xx driver to include new frequency entries for pll1443x table,
and return error for invalid PLL type
- Add missing of_node_put() call for a number of i.MX clock drivers
- Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already
have the flag on its child cpu clock
- Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL
via CORE_SEL slice, and source from A53 CCM clk root when we need to
change ARM PLL frequency. Thus, we can support core running above
1GHz safely
- Update i.MX pfdv2 driver to check zero rate and use determine_rate for
getting the best rate
- Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for imx7d
- Remove PMC clks from Tegra clk driver
- Improved clock/reset handling for the Renesas R-Car USB2 Clock Selector
- Conversion to json-schema of the Renesas CPG/MSSR DT bindings
- Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Update Amlogic audio clock gate hierarchy for meson8 and gxbb
- Update Amlogic g12a spicc clock sources
- Support for Ingenic X1000 TCU clks
-----BEGIN PGP SIGNATURE-----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=ZoI6
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's not much to see in the core framework this time around.
Instead the majority of the diff is the normal collection of driver
additions for new SoCs and non-critical clk data fixes and updates.
The framework must be middle aged.
The two biggest directories in the diffstat show that the Qualcomm and
Unisoc support added a handful of big drivers for new SoCs but that's
not really the whole story because those new drivers tend to add large
numbers of lines of clk data. There's a handful of AT91 clk drivers
added this time around too and a bunch of improvements to drivers like
the i.MX driver. All around lots of updates and fixes in various clk
drivers which is good to see.
The core framework has only one real major change which has been
baking in next for the past couple months. It fixes the framework so
that it stops caching a clk's phase when the phase clk_op returns an
error. Before this change we would consider some negative errno as a
phase and that just doesn't make sense.
Core:
- Don't show clk phase when it is invalid
New Drivers:
- Add support for Unisoc SC9863A clks
- Qualcomm SM8250 RPMh and MSM8976 RPM clks
- Qualcomm SM8250 Global Clock Controller (GCC) support
- Qualcomm SC7180 Modem Clock Controller (MSS CC) support
- EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs
- Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and
at91sam9g45 SoCs
Updates:
- GPU GX GDSC support on Qualcomm sc7180
- Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers
- A series from Anson to convert i.MX8 clock bindings to json-schema
- Update i.MX pll14xx driver to include new frequency entries for
pll1443x table, and return error for invalid PLL type
- Add missing of_node_put() call for a number of i.MX clock drivers
- Drop flag CLK_IS_CRITICAL from 'A53_CORE' mux clock, as we already
have the flag on its child cpu clock
- Fix a53 cpu clock for i.MX8 drivers to get it source from ARM PLL
via CORE_SEL slice, and source from A53 CCM clk root when we need
to change ARM PLL frequency. Thus, we can support core running
above 1GHz safely
- Update i.MX pfdv2 driver to check zero rate and use determine_rate
for getting the best rate
- Add CLKO2 for imx8mm, SNVS clock for imx8mn, and PXP clock for
imx7d
- Remove PMC clks from Tegra clk driver
- Improved clock/reset handling for the Renesas R-Car USB2 Clock
Selector
- Conversion to json-schema of the Renesas CPG/MSSR DT bindings
- Add Crypto clocks on Renesas R-Car M3-W/W+, M3-N, E3, and D3
- Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car H3, M3-W/W+, and
M3-N
- Update Amlogic audio clock gate hierarchy for meson8 and gxbb
- Update Amlogic g12a spicc clock sources
- Support for Ingenic X1000 TCU clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (146 commits)
clk: sprd: fix to get a correct ibias of pll
dt-bindings: imx8mm-clock: Fix the file path
dt-bindings: imx8mq-clock: Fix the file path
clk: qcom: rpmh: Drop unnecessary semicolons
clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd()
clk: tegra: Use NULL for pointer initialization
clk: sprd: add clocks support for SC9863A
clk: sprd: support to get regmap from parent node
clk: sprd: Add macros for referencing parents without strings
clk: sprd: Add dt-bindings include file for SC9863A
dt-bindings: clk: sprd: add bindings for sc9863a clock controller
dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific
clk: sprd: add gate for pll clocks
MAINTAINERS: dt: update reference for arm-integrator.txt
clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks
clk: mmp2: Add clock for fifth SD HCI on MMP3
dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3
clk: mmp2: Add clocks for the thermal sensors
dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors
clk: mmp2: add the GPU clocks
...
|
|
|
Linus Torvalds
|
854e80bcfd |
ARM: devicetree updates for v5.7
Most of the commits are for additional hardware support and minor fixes
for existing machines for all the usual platforms: qcom, amlogic, at91,
gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip,
exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap,
and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation.
Andre Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into
dts files, for many devices that relied on a mix of auxiliary data
in addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants, along
with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on
the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=ye2F
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the commits are for additional hardware support and minor
fixes for existing machines for all the usual platforms: qcom,
amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
sunxi, broadcom, omap, and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation. Andre
Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into dts
files, for many devices that relied on a mix of auxiliary data in
addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants,
along with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
on the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"
* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
ARM: dts: ux500: Fix missing node renames
arm64: dts: Revert "specify console via command line"
MAINTAINERS: Update Calxeda Highbank maintainership
arm: dts: calxeda: Group port-phys and sgpio-gpio items
arm: dts: calxeda: Fix interrupt grouping
arm: dts: calxeda: Provide UART clock
arm: dts: calxeda: Basic DT file fixes
arm64: dts: specify console via command line
ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
ARM: dts: gemini: Add thermal zone to DIR-685
ARM: dts: gemini: Rename IDE nodes
ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
arm64: dts: khadas-vim3: add SPIFC controller node
...
|
|
|
Stephen Boyd
|
28ecaf1c30 |
Merge branches 'clk-unisoc', 'clk-tegra', 'clk-qcom' and 'clk-imx' into clk-next
- Add support for Unisoc SC9863A clks - GPU GX GDSC support on Qualcomm sc7180 - Qualcomm SM8250 RPMh and MSM8976 RPM clks - Qualcomm SM8250 Global Clock Controller (GCC) support - Qualcomm SC7180 Modem Clock Controller (MSS CC) support * clk-unisoc: clk: sprd: fix to get a correct ibias of pll clk: sprd: add clocks support for SC9863A clk: sprd: support to get regmap from parent node clk: sprd: Add macros for referencing parents without strings clk: sprd: Add dt-bindings include file for SC9863A dt-bindings: clk: sprd: add bindings for sc9863a clock controller dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC specific clk: sprd: add gate for pll clocks * clk-tegra: clk: tegra: Use NULL for pointer initialization clk: tegra: Remove audio clocks configuration from clock driver clk: tegra: Remove tegra_pmc_clk_init along with clk ids clk: tegra: Remove CLK_M_DIV fixed clocks clk: tegra: Fix Tegra PMC clock out parents clk: tegra: Add Tegra OSC to clock lookup clk: tegra: Add support for OSC_DIV fixed clocks dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings dt-bindings: tegra: Convert Tegra PMC bindings to YAML dt-bindings: clock: tegra: Add IDs for OSC clocks * clk-qcom: (21 commits) clk: qcom: rpmh: Drop unnecessary semicolons clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd() clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150 ipq806x: gcc: Added the enable regs and mask for PRNG clk: qcom: Add modem clock controller driver for SC7180 clk: qcom: gcc: Add support for modem clocks in GCC dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings clk: qcom: clk-rpm: add missing rpm clk for ipq806x clk: qcom: gcc: Add global clock controller driver for SM8250 dt-bindings: clock: Add SM8250 GCC clock bindings clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs clk: qcom: clk-alpha-pll: Refactor trion PLL clk: qcom: clk-alpha-pll: Use common names for defines dt-bindings: clock: rpmcc: Document msm8976 compatible clk: qcom: smd: Add support for MSM8976 rpm clocks clk: qcom: clk-rpmh: Wait for completion when enabling clocks clk: qcom: rpmh: Add support for RPMH clocks on SM8250 dt-bindings: clock: Add RPMHCC bindings for SM8250 clk: qcom: alpha-pll: Make error prints more informative clk: qcom: gpucc: Add support for GX GDSC for SC7180 ... * clk-imx: (43 commits) dt-bindings: imx8mm-clock: Fix the file path dt-bindings: imx8mq-clock: Fix the file path clk: imx: clk-gate2: Pass the device to the register function clk: imx7d: Add PXP clock clk: imx8mq: A53 core clock no need to be critical clk: imx8mp: A53 core clock no need to be critical clk: imx8mm: A53 core clock no need to be critical clk: imx8mn: A53 core clock no need to be critical clk: imx: pllv4: use prepare/unprepare clk: imx: pfdv2: determine best parent rate clk: imx: pfdv2: switch to use determine_rate clk: imx: Fix division by zero warning on pfdv2 clk: imx: clk-sscg-pll: Drop unnecessary initialization clk: imx: pll14xx: Return error if pll type is invalid clk: imx: imx8mp: fix a53 cpu clock clk: imx: imx8mn: fix a53 cpu clock clk: imx: imx8mm: fix a53 cpu clock clk: imx: imx8mq: fix a53 cpu clock clk: imx8mp: Rename the IMX8MP_CLK_HDMI_27M clock clk: imx8mn: Remove unused includes ... |
|
|
Stephen Boyd
|
53a2cc5cc3 |
Merge branches 'clk-ti', 'clk-ingenic', 'clk-typo', 'clk-at91', 'clk-mmp2' and 'clk-arm-icst' into clk-next
- EHRPWM's TimeBase clock(TBCLK) for TI AM654 SoCs - Support PMC clks on at91sam9n12, at91rm9200, sama5d3, and at91sam9g45 SoCs - Fixes and improvements for the Marvell MMP2/MMP3 SoC clk drivers * clk-ti: clk: keystone: Add new driver to handle syscon based clocks dt-bindings: clock: Add binding documentation for TI EHRPWM TBCLK * clk-ingenic: clk: ingenic/TCU: Fix round_rate returning error clk: ingenic/jz4770: Exit with error if CGU init failed clk: JZ4780: Add function for enable the second core. clk: Ingenic: Add support for TCU of X1000. * clk-typo: clk: Fix trivia typo in comment exlusive => exclusive * clk-at91: clk: at91: add at91rm9200 pmc driver clk: at91: add at91sam9n12 pmc driver clk: at91: add sama5d3 pmc driver clk: at91: add at91sam9g45 pmc driver clk: at91: usb: introduce num_parents in driver's structure clk: at91: usb: use proper usbs_mask clk: at91: sam9x60: fix usb clock parents clk: at91: usb: continue if clk_hw_round_rate() return zero clk: at91: sam9x60: Don't use audio PLL * clk-mmp2: clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks clk: mmp2: Add clock for fifth SD HCI on MMP3 dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3 clk: mmp2: Add clocks for the thermal sensors dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors clk: mmp2: add the GPU clocks dt-bindings: marvell,mmp2: Add clock ids for the GPU clocks clk: mmp2: Add PLLs that are available on MMP3 dt-bindings: marvell,mmp2: Add clock ids for MMP3 PLLs clk: mmp2: Check for MMP3 dt-bindings: clock: Add MMP3 compatible string clk: mmp2: Stop pretending PLL outputs are constant clk: mmp2: Add support for PLL clock sources dt-bindings: clock: Convert marvell,mmp2-clock to json-schema clk: mmp2: Constify some strings clk: mmp2: Remove a unused prototype * clk-arm-icst: MAINTAINERS: dt: update reference for arm-integrator.txt clk: versatile: Add device tree probing for IM-PD1 clocks clk: versatile: Export icst_clk_setup() dt-bindings: clock: Create YAML schema for ICST clocks |
|
|
Stephen Boyd
|
2d11e9a1fd |
Merge branches 'clk-phase-errors', 'clk-amlogic', 'clk-renesas' and 'clk-allwinner' into clk-next
- Don't show clk phase when it is invalid * clk-phase-errors: clk: rockchip: fix mmc get phase clk: Fix phase init check clk: Bail out when calculating phase fails during clk registration clk: Move rate and accuracy recalc to mostly consumer APIs clk: Use 'parent' to shorten lines in __clk_core_init() clk: Don't cache errors from clk_ops::get_phase() * clk-amlogic: clk: meson: meson8b: set audio output clock hierarchy clk: meson: g12a: add support for the SPICC SCLK Source clocks dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs clk: meson: gxbb: set audio output clock hierarchy clk: meson: gxbb: add the gxl internal dac gate dt-bindings: clk: meson: add the gxl internal dac gate * clk-renesas: dt-bindings: clock: renesas: cpg-mssr: Convert to json-schema clk: renesas: rcar-usb2-clock-sel: Add reset_control clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties clk: renesas: Remove use of ARCH_R8A7795 clk: renesas: r8a77965: Add RPC clocks clk: renesas: r8a7796: Add RPC clocks clk: renesas: r8a7795: Add RPC clocks clk: renesas: rcar-gen3: Add CCREE clocks * clk-allwinner: clk: sunxi-ng: sun8i-de2: Sort structures clk: sunxi-ng: sun8i-de2: Add R40 specific quirks clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A83T clk: sunxi-ng: sun8i-de2: Don't reuse A83T resets clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate core clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A64 clk: sunxi-ng: sun8i-de2: Split out H5 definitions clk: sunxi-ng: a64: Export MBUS clock |
|
|
Linus Torvalds
|
d18292dc07 |
ARM: driver updates
These are the usual updates for SoC specific device drivers and related
subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and
TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qbsP
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
|
|
|
Linus Torvalds
|
0e8fb69f28 |
ARM: SoC updates
The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including
cpuidle, pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=UTk1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
|
|
|
Arnd Bergmann
|
8bdbf16908 |
Merge branch 'arm/late' into arm/dt
Include originally "late" updates for OMAP and Qualcomm, now that it's not late any more. * arm/late: (122 commits) ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node ... |
|
|
Linus Torvalds
|
0ad5b053d4 |
Char/Misc driver patches for 5.7-rc1
Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs rN4JJpOcTddvZcVlD+vo =ocWk -----END PGP SIGNATURE----- Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ... |
|
|
Damien Le Moal
|
5ba568f57f
|
riscv: Add Kendryte K210 device tree
Add a generic device tree for Kendryte K210 SoC based boards. This is for now a very simple device tree describing the core elements of the SoC. This is suitable (and tested) for the Kendryte KD233 development board, the Sipeed MAIX M1 Dan Dock board and the Sipeed MAIXDUINO board. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> |
|
|
Linus Torvalds
|
848960e576 |
sound updates for 5.7-rc1
This became again a busy development cycle. There are a few ALSA
core updates (merely API cleanups and sparse fixes), while majority
of other changes are found in ASoC scene.
Here are some highlights:
* ALSA core:
- More helper macros for sparse warning fixes (e.g. bitwise types)
- Slight optimization of PCM OSS locks
- Make common handling for PCM / compress buffers (for SOF)
* ASoC:
- Lots of code refactoring and modernization for (still ongoing)
componentization works
- Conversion of SND_SOC_ALL_CODECS to use imply
- Continued refactoring and fixing of the Intel SOF/SST support,
including the initial (but still incomplete) SoundWire support
- SoundWire and more advanced clocking support for Realtek RT5682
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563
and TLV320ADCX140
* HD-audio:
- Optimizations in HDMI jack handling
- A few new quirks and fixups for Realtek codecs
* USB-audio:
- Delayed registration support
- New quirks for Motu, Kingston, Presonus
-----BEGIN PGP SIGNATURE-----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=fAMQ
-----END PGP SIGNATURE-----
Merge tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This became again a busy development cycle. There are few ALSA core
updates (merely API cleanups and sparse fixes), with the majority of
other changes are found in ASoC scene.
Here are some highlights:
ALSA core:
- More helper macros for sparse warning fixes (e.g. bitwise types)
- Slight optimization of PCM OSS locks
- Make common handling for PCM / compress buffers (for SOF)
ASoC:
- Lots of code refactoring and modernization for (still ongoing)
componentization works
- Conversion of SND_SOC_ALL_CODECS to use imply
- Continued refactoring and fixing of the Intel SOF/SST support,
including the initial (but still incomplete) SoundWire support
- SoundWire and more advanced clocking support for Realtek RT5682
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563
and TLV320ADCX140
HD-audio:
- Optimizations in HDMI jack handling
- A few new quirks and fixups for Realtek codecs
USB-audio:
- Delayed registration support
- New quirks for Motu, Kingston, Presonus"
* tag 'sound-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor
Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h"
ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups
ALSA: hda/realtek - Set principled PC Beep configuration for ALC256
ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256
ALSA: hda/realtek - a fake key event is triggered by running shutup
ALSA: hda: default enable CA0132 DSP support
ASoC: amd: acp3x-pcm-dma: clean up two indentation issues
ASoC: tlv320adcx140: Remove undocumented property
ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function
ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
ASoC: Intel: boards: add sof_sdw machine driver
ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms
ASoC: rt5682: move DAI clock registry to I2S mode
ASoC: pxa: magician: convert to use i2c_new_client_device()
ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities
Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks
ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers
...
|
|
|
Linus Torvalds
|
063d194224 |
media updates for v5.7-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl6Bvm0ACgkQCF8+vY7k 4RViMQ//baNJyAA8/Hpxz1w5+nL5hsTOhf2PcPgnCLkRVQnIiKMZoq7AS5KWtbqu im0SM6nWduGc2T/44Ew13YmBnuWMdXL9Gs8XtAkNakgSV1UM+A3pRuOWRYCyU3Ts 1QDsc3N7oY9cvyJGWOlqdcA4gp4AaKxjS6M6Z18wYBk/jYSCcj4ZVecT89DYeeM7 wFORkv/xSdgC3eoKWEwTyglzUmrXKrbfHdcNWrQBg+1SN3WrMYQWCL6nSYMqn0Vu f9L5E6jUSx9s6+apxS0OUQmDj78RM1JCEY1P8lgc3tAtVJ+X3yZbxwtpcvujhFPv c48NUQeyxAJc7evarvkd73Gwl4buujqHSgiRUovHwqUXHJuGZ3PBTryV9HzbmYYy EeHS/23t09F3j9zYtuoDNFIED03Mi+TNeS04cq8OIfwNl7xpUSEV0S/wd11V2308 cfm6lsogGE9HRbaIxCHgx4AiGFVhbpK1OQt66iYze8r/wyxnN8MVOHGWw+eI4LRK 9gwh7Wx37k6uCrjfOnLSgx7kcJ+mxSZEYyHJZqqtPm9H1SC68GOxhL/S3Zu7arvK eiwFfxJBiunCEfauOx28kaAdvBZVyEvYeDFYl/k+q4DCIGjvK0FXud6QRjNXv24S qUXYZKPUALTFOpbkQ3IQiBOQNM4NhF15RzCqRUptVnlF05MSywg= =Ve8R -----END PGP SIGNATURE----- Merge tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor driver: imx219 - Support for some new pixelformats - Support for Sun8i SoC - Added more codecs to meson vdec driver - Prepare for removing the legacy usbvision driver by moving it to staging. This driver has issues and use legacy core APIs. If nobody steps up to address those, it is time for its retirement. - Several cleanups and improvements on drivers, with the addition of new supported boards * tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits) media: venus: firmware: Ignore secure call error on first resume media: mtk-vpu: load vpu firmware from the new location media: i2c: video-i2c: fix build errors due to 'imply hwmon' media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ media: hantro: add initial i.MX8MQ support media: dt-bindings: Document i.MX8MQ VPU bindings media: vivid: fix incorrect PA assignment to HDMI outputs media: hantro: Add linux-rockchip mailing list to MAINTAINERS media: cedrus: h264: Fix 4K decoding on H6 media: siano: Use scnprintf() for avoiding potential buffer overflow media: rc: Use scnprintf() for avoiding potential buffer overflow media: allegro: create new struct for channel parameters media: allegro: move mail definitions to separate file media: allegro: pass buffers through firmware media: allegro: verify source and destination buffer in VCU response media: allegro: handle dependency of bitrate and bitrate_peak media: allegro: read bitrate mode directly from control media: allegro: make QP configurable media: allegro: make frame rate configurable media: allegro: skip filler data if possible ... |
|
|
Mark Brown
|
1c521d7e62
|
Merge branch 'asoc-5.7' into asoc-next | |
|
Arnd Bergmann
|
4287ec9afa |
arm64: dts: Amlogic updates for v5.7 (round 2)
- G12[ab]: add SPI support, enable on odroid-n2 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl55M5UACgkQWTcYmtP7 xmX7mQ/+Pc4Px4VT81SkuLMAGoXJQnV0u+C1w3pWJYB3Od64QYE8woM8dVcacG/R DJWBpIUdQGad7J3ZygWZTwt2dW1+HggA+/t1Q4FzNv8hWOXzRH+WJB/Wa0zoGxA9 q8EM39zhmaSh7LFaakelq+pHpD+GIbNShfGibv5vGs6SgxaZ4SC58jHH5kwYQiqC 6pKs3P3CviCdj+s3OyTEsMGIPyuPFlC+iLFZdX7Pgaarsw/XXsOYQdodvQYzy8gL VEmQ4Sls2LN5Xuczx9PLXQuUOgcnL/4JvwW2vkqKS7c5HSiJ0TfwA5DUUZpHPOsC BSvflUGqltejRt8V0+KkRXtmsILJE5GBqk9pTN9RUpEf3POqoGfriK11hcHsa93X 1PtoxYCVrDJBChQYCIIJ2Va1Ktv5A06Ew+u1cDcEMIte2iSFL9T4DOe7Uaj1/7ne ZxKRDs4u3QsIrK6ULzonVznlS6hGlshM0zfdzOFIZcmvj0dl3w4jFljXo+1Jd71y gagjRZrc/M1J4vNTqIzRHrqBPsTEokvzTU/R3tWCBU5INmBtcAxQLDMh4PNqs/Ti 2t8BUMdND6wUclkE3GL9ZBYKuAx/jWrIZUvl68R3r6OoqokL7hvrbUcyZr92IDry rTZcpQWwHbFbFHEVwlG1h/yKdRTw1I0+WKRdsXGemsYog2lIApQ= =feMw -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.7 (round 2) - G12[ab]: add SPI support, enable on odroid-n2 * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node arm64: dts: khadas-vim3: add SPIFC controller node arm64: dts: meson-g12: add the SPIFC nodes arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width arm64: dts: meson-g12-common: add spicc controller nodes dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs dt-bindings: clk: meson: add the gxl internal dac gate Link: https://lore.kernel.org/r/7hftdyhfq4.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Arnd Bergmann
|
a95e12db9e |
i.MX arm64 DTS update for 5.7:
- New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
- Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
- Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
- Add SNVS clock description to pwrkey device for i.MX8 SoCs.
- A number of updates on librem5-devkit board to add audio, proximity
sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
devices as well.
- A series of patches from Anson Huang to update i.MX8 EVK boards
for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
- Add PCIe device nodes for LX2160A and LS1028A SoC.
- Add FSPI deivce support for LX2160A evaluation boards.
- Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
- Other small and random updates on LS1028A and i.MX8 support.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xmGAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7hcggAituxUHoAgPgEmEp7h+7C0dAkD8tL
G21IEi1xL608qIeKgVsyhPqbIze84+CrxzWhhUDJD+EUoVYwc78mGwOebDPBT+bE
U/VP0GU3oaHUOe0zApSf+4uWWHxmx2tqBut6qwgKp9h/nmXQKZ39yivAifrQgyn5
jckrN+gtGoCWLPUVF4baqUBJ7383A2gCpGsdTodNg95e903PYRDFORoez/8q4Hdo
r86YbIZca+tQxDrG00tpKgb0n0iIFsR139YTQtSjUQhzw9nRUcF2AuxtYGYl96mo
ZTyW82fLf+t9Av416cHFi8EL9DKQxVV6stSL6OCrVosll9zWoN/dTuNiOw==
=nTfu
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 DTS update for 5.7:
- New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
- Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
- Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
- Add SNVS clock description to pwrkey device for i.MX8 SoCs.
- A number of updates on librem5-devkit board to add audio, proximity
sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
devices as well.
- A series of patches from Anson Huang to update i.MX8 EVK boards
for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
- Add PCIe device nodes for LX2160A and LS1028A SoC.
- Add FSPI deivce support for LX2160A evaluation boards.
- Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
- Other small and random updates on LS1028A and i.MX8 support.
* tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
arm64: dts: ls1028a: disable the felix switch by default
arm64: dts: imx8mp: Add snvs clock to powerkey
arm64: dts: imx8mn: Add snvs clock to powerkey
arm64: dts: ls1028a: Add PCIe controller DT nodes
arm64: dts: ls1028a: sl28: add support for variant 2
arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
arm64: dts: freescale: sl28: add SPI flash
arm64: dts: imx8m: fix aips dts node
arm64: dts: imx8mn: Add CPU thermal zone support
arm64: dts: imx8mm: Add thermal zone support
arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
arm64: dts: enable fspi in imx8mm dts
arm64: dts: imx8mn: align name for crypto child nodes
arm64: dts: lx2160aqds: Add FSPI node properties
arm64: dts: lx2160ardb: Update FSPI node properties
arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
arm64: dts: layerscape: add iommu-map property to pci nodes
arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
arm64: dts: imx8mp-evk: Add i2c3 support
...
Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
Arnd Bergmann
|
993330e000 |
soc: drivers: Amlogic updates for v5.7
- Add secure power domain controller -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl5vy00ACgkQWTcYmtP7 xmXW3Q//Vp+Smi0+r9qEMhM18WFnaTn7A/uh828gjraX1Hnl8KlqYfz4Howh3GxK IsloulnmsfskJ2c+iVrJiX7SjCUJzd6kaordLC0C63WIxTnUgDnaUDFjwzUqT+Tr y9HtwCmUIgl1acJ6wPB+K0ssLuw8FUZa5RmQK24KoOo6Dz1wj3nB15xuy11oRnX7 63irUHHUVg7afV89C6Kxz8bUapufHvrqKKHeNHHm9ulwXFx04547NJ3+WMR0+qPZ QmlMav17p/SI3z40QVePAe/l9RQklxPVNKR2600PzMTjaDIuUK0HLRkRlYedl8fC K12WiPJJp8qZcf5rOMc3wYmdD4AJHsSlp1GhPR7rf4CU8RAkkHDJLvUJaGXJdu4A ixKepdkiKM9p57P48MDSCEvmLyfdt2ce4K0XkZgg9QVaNZ0uF30ixDoOsr+NFRkA quP52cMD3g0Wsm1OW+Ps+xkzkfXMpl+fNmCHFG7FAmSVbHxruhUhb0iah37tO1cz tUZ+wMV4DDkdFp/OKlywOqhk69Z2Uwa0Vs3yKWRrAXaWVfx7GOlR33u7CDZGGSba uSZsl1C4oFlKJ3PJ/6aMDEMx7CijMpENvQHtii2y4BIA8Uy69VBd2jA3SfXoylKw Xz39UfdQNnRUOlqGexh5DNym/iLdXh5YMSL3DgqkSZFG0do5aqM= =IKeh -----END PGP SIGNATURE----- Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers soc: drivers: Amlogic updates for v5.7 - Add secure power domain controller * tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: dt-bindings: power: Fix dt_binding_check error soc: amlogic: fix compile failure with MESON_SECURE_PM_DOMAINS & !MESON_SM soc: amlogic: Add support for Secure power domains controller dt-bindings: power: add Amlogic secure power domains bindings firmware: meson_sm: Add secure power domain support Link: https://lore.kernel.org/r/7hpndcugoo.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Chunyan Zhang
|
be7ef655be |
clk: sprd: Add dt-bindings include file for SC9863A
This file defines all SC9863A clock indexes, it should be included in the device tree in which there's device using the clocks. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200304072730.9193-5-zhang.lyra@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Greg Kroah-Hartman
|
baca54d956 |
Merge 5.6-rc7 into char-misc-next
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Mike Leach
|
b39b46fb9c |
dt-bindings: arm: Adds CoreSight CTI hardware definitions
Adds new coresight-cti.yaml file describing the bindings required to define CTI in the device trees. Adds an include file to dt-bindings/arm to define constants describing common signal functionality used in CoreSight and generic usage. Signed-off-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200320165303.13681-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Lubomir Rintel
|
c2ca122a0a |
dt-bindings: marvell,mmp2: Add clock id for the fifth SD HCI on MMP3
There's one extra SDHCI on MMP3, used by the internal SD card on OLPC XO-4. Add a clock for it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-16-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Lubomir Rintel
|
41a8632049 |
dt-bindings: marvell,mmp2: Add clock ids for the thermal sensors
There seems to be a single thermal sensor block on MMP2 and a couple more on MMP3. Add definitions for their respective clocks. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-14-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Lubomir Rintel
|
e3142226fe |
dt-bindings: marvell,mmp2: Add clock ids for the GPU clocks
MMP2 has a single GC860 core while MMP3 has a GC2000 and a GC300. On both platforms there's an AXI bus interface clock that's common for all GPUs and each GPU core has a separate clock. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lkml.kernel.org/r/20200309194254.29009-12-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Lubomir Rintel
|
4d6da655d1 |
dt-bindings: marvell,mmp2: Add clock ids for MMP3 PLLs
MMP3 variant provides some more clocks. Add respective IDs. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200309194254.29009-9-lkundrak@v3.sk Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Wesley Cheng
|
8411aa5059 |
clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150
This adds the USB3 PIPE clock and GDSC structures, so that the USB driver can vote for these resources to be enabled/disabled when required. Both are needed for SS and HS USB paths to operate properly. The GDSC will allow the USB system to be brought out of reset, while the PIPE clock is needed for data transactions between the PHY and controller. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lkml.kernel.org/r/1584478412-7798-2-git-send-email-wcheng@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Taniya Das
|
53624f9b75 |
dt-bindings: clock: Add YAML schemas for the QCOM MSS clock bindings
The Modem Subsystem clock provider have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Add clock ids for GCC MSS and MSS clocks which are required to bring the modem out of reset. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1584596131-22741-2-git-send-email-tdas@codeaurora.org Reviewed-by: Rob Herring <robh@kernel.org> Tested-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Tony Lindgren
|
a7cbd5cb41 |
Drop legacy platform data for omaps for v5.7
This series of changes continues dropping legacy platform data for omaps by updating devices to probe with ti-sysc interconnect target module driver: - Update omap4, omap5, am437x, and dra7 display subsystem (DSS) to probe with device tree data only - Update am335x, am437x and dra7 to probe EDMA to probe with device tree data only - Drop legacy platform data for am335x and am437x PRUSS as the current code just keeps the devices in reset - Drop legacy platform data for omap4 DSP and IPU as the current code just keeps the devices in reset - Configure am437x and dra7 PRU-ICSS to probe with device tree data For the dropped omap4 DSP and IPU platform data, there will be patches coming later on to configure the accelerators using the omap remoteproc bindings so hopefully folks can actually use these devices eventually. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl5nwYURHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXNknBAAoxZgT7vx2BwsG0lpjbFrhBXIm9gQoCxC fFiMRLX4PdEtMSzyHooszuBVJN/AzFb/dY43psccKZnwkigfAduiB/9Gn9Nw/Cwf yLsaWiaUUfM6c1iQqv6HDV6fKal55emRZ/6RSfUlUMIyCcMRxg0NR8mSju3+uN9O qGK2Ksxp4sRdG+m2KylNMB7MDSSHxKEsAmEMHlAQNOF6+O0m+AoDLN39XCY50XS+ 2aUbcbyXbIK0lNSkbVOLf+UPZECIs7sy1qc02/OtG5i29z+0lJ/7men4R7gWIXRN m7P0OPFlo8GyMKDcSfWDvw7UC2bNGvQKDisW4AfN3CjnlxD67S/F/bMbS8SK3Nec vev/BmcMrhq4kEeTS+syUdLKwc8JI5dmrP/dhOBGwh1fdfoOrL2heG4ntLkMYX9r SeEcSY3ixbr+/oClM61lbxV1TCro5oTzvWhYipf8KJiuXQD8ggEyeoO+0VAqK7Xq LHdH+fEP2J72hXPdStUir6hJq1Fm1LClD9f0FPNWVj54xJtlHRYto/rKC7H3KzBJ +KncyaFuUmOCDgt0bDqiTV7PXfURzqDERW6YL2UYpHGgQ0CqeBE89MGEKHU5Xzno i8PrTFDLM9Icej8LIuD65CvFzAMFg5Hxu0bD7JDXh+Vmox5aHiQCPCLYD5oK3d/e Z/tllQbJpIM= =QqzI -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.7/ti-sysc-drop-pdata-signed' into ti81xx Drop legacy platform data for omaps for v5.7 This series of changes continues dropping legacy platform data for omaps by updating devices to probe with ti-sysc interconnect target module driver: - Update omap4, omap5, am437x, and dra7 display subsystem (DSS) to probe with device tree data only - Update am335x, am437x and dra7 to probe EDMA to probe with device tree data only - Drop legacy platform data for am335x and am437x PRUSS as the current code just keeps the devices in reset - Drop legacy platform data for omap4 DSP and IPU as the current code just keeps the devices in reset - Configure am437x and dra7 PRU-ICSS to probe with device tree data For the dropped omap4 DSP and IPU platform data, there will be patches coming later on to configure the accelerators using the omap remoteproc bindings so hopefully folks can actually use these devices eventually. |
|
|
Tony Lindgren
|
1bf4b15b19 |
clk: ti: Fix dm814x clkctrl for ethernet
We are missing alwon ethernet clock for dm814x and this prevents us
from probing the CPSW with device tree only data. Looks like Ethernet
currently only works if it has been enabled in the bootloader.
Looks like relying on the bootloader clocks is not an issue with the
mainline kernel currently, but it will be an issue when configuring
CPSW Ethernet to probe with device tree data only as we will be managing
the clocks.
Fixes:
|
|
|
Laurent Pinchart
|
4ae9afbaae |
clk: imx7d: Add PXP clock
The PXP has a single CCGR clock gate, gating both the IPG_CLK_ROOT and the MAIN_AXI_CLK_ROOT. Add a single clock to cover both. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Ansuel Smith
|
eec152734b |
clk: qcom: clk-rpm: add missing rpm clk for ipq806x
Add missing definition of rpm clk for ipq806x soc Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Acked-by: John Crispin <john@phrozen.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20200310143756.244-1-ansuelsmth@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Javier Martinez Canillas
|
a080a92a6f |
media: partial revert of "[media] tvp5150: add HW input connectors support"
Commit |
|
|
Marco Felsch
|
a5a8cb966a |
media: dt-bindings: display: add sdtv-standards defines
Add defines which can be included to easily describe the supported standard tv norms 'sdtv-standards' within the device tree. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> |
|
|
Taniya Das
|
98394efb48 |
dt-bindings: clock: Add SM8250 GCC clock bindings
Add device tree bindings for global clock controller on SM8250 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lkml.kernel.org/r/20200224045003.3783838-5-vkoul@kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Roger Quadros
|
4d0dd3802e |
dt-bindings: bus: ti-sysc: Add support for PRUSS SYSC type
The PRUSS module has a SYSCFG which is unique. The SYSCFG has two additional unique fields called STANDBY_INIT and SUB_MWAIT in addition to regular IDLE_MODE and STANDBY_MODE fields. Add the bindings for this new sysc type. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Sibi Sankar
|
7a077f7fda |
dt-bindings: interconnect: Add OSM L3 DT bindings
Add bindings for Operating State Manager (OSM) L3 interconnect provider on SDM845 SoCs. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200227105632.15041-3-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> |
|
|
Odelu Kukatla
|
c77af39bdb |
dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings
The Qualcomm SC7180 platform has several bus fabrics that could be controlled and tuned dynamically according to the bandwidth demand. Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1583241493-21212-2-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> |
|
|
David Dai
|
aae57773fb |
interconnect: qcom: sdm845: Split qnodes into their respective NoCs
In order to better represent the hardware and its different Network-On-Chip devices, split the sdm845 provider driver into NoC specific providers. Remove duplicate functionality already provided by the icc rpmh and bcm voter drivers to calculate and commit bandwidth requests to hardware. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200209183411.17195-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> |
|
|
Peng Fan
|
7ab2272101 |
clk: imx: imx8mp: fix a53 cpu clock
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root signoff timing is 1Ghz, however the A53 core which sources from CCM root could run above 1GHz which voilates the CCM. There is a CORE_SEL slice before A53 core, we need configure the CORE_SEL slice source from ARM PLL, not A53 CCM clk root. The A53 CCM clk root should only be used when need to change ARM PLL frequency. Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out. Configure a53 ccm root sources from 800MHz sys pll Configure a53 core sources from arm_pll_out Mark arm_a53_core as critical clk Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Peng Fan
|
c69def8898 |
clk: imx: imx8mn: fix a53 cpu clock
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.
There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.
The A53 CCM clk root should only be used when need to change ARM PLL
frequency.
Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clk.
Fixes:
|
|
|
Peng Fan
|
d3b70cd87e |
clk: imx: imx8mm: fix a53 cpu clock
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.
There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.
The A53 CCM clk root should only be used when need to change ARM PLL
frequency.
Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clock
Fixes:
|
|
|
Peng Fan
|
d6fb02f054 |
clk: imx: imx8mq: fix a53 cpu clock
The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which violates the CCM.
There is a CORE_SEL slice before A53 core, we need to configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.
The A53 CCM clk root should only be used when need to change ARM PLL
frequency.
Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clock
Fixes:
|
|
|
Anson Huang
|
c267bd443f |
clk: imx8mp: Rename the IMX8MP_CLK_HDMI_27M clock
On i.MX8MP, internal HDMI 27M clock is actually 24MHz, so rename the IMX8MP_CLK_HDMI_27M to IMX8MP_CLK_HDMI_24M. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Jerome Brunet
|
bd56e593da
|
ASoC: meson: g12a: add toacodec dt-binding documentation
Add the DT bindings and documentation of the internal audio DAC glue found on Amlogic g12a and sm1 SoC families Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200221153607.1585499-2-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Neil Armstrong
|
42be7c41a5 |
dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs
Add clock ids used by the SPICC Controllers of the G12A and compatible SoCs Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> |
|
|
Sowjanya Komatineni
|
cd88f16792 |
dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock
Tegra PMC has blink functionality that allows 32 kHz clock out to blink pin of the Tegra. This patch adds id for this blink clock to use for enabling or disabling blink output through device tree. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
Sowjanya Komatineni
|
f85fa3198d |
dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
Tegra PMC has 3 clocks clk_out_1, clk_out_2, and clk_out_3. This patch documents PMC clock bindings and adds a header defining Tegra PMC clock ids. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
Sowjanya Komatineni
|
e5377ab288 |
dt-bindings: clock: tegra: Add IDs for OSC clocks
Tegra has OSC, OSC_DIV2 and OSC_DIV4 clocks from OSC pads which are the possible parents of Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 for Tegra30 through Tegra210. So, this patch adds ids for these clocks. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
Anson Huang
|
5eb4025704 |
clk: imx8mn: Fix incorrect clock defines
IMX8MN_CLK_I2C4 and IMX8MN_CLK_UART1's index definitions are incorrect,
fix them.
Fixes:
|
|
|
Fabio Estevam
|
9c07ae6983 |
clk: imx8mm: Add CLKO2 support
Add CLKO2 support, which is useful for debugging purposes. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Jianxin Pan
|
165b5fb294 |
dt-bindings: power: add Amlogic secure power domains bindings
Add the bindings for the Amlogic Secure power domains, controlling the secure power domains. The bindings targets the Amlogic A1 and C1 compatible SoCs, in which the power domain registers are in secure world. Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1579087831-94965-3-git-send-email-jianxin.pan@amlogic.com |
|
|
Peng Fan
|
33db2ce73e |
clk: imx: imx8mn: use imx8m_clk_hw_composite_core
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Peng Fan
|
811e4171d0 |
clk: imx: imx8mm: use imx8m_clk_hw_composite_core
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Peng Fan
|
7a8d3b90bd |
clk: imx: imx8mq: use imx8m_clk_hw_composite_core
Use imx8m_clk_hw_composite_core to simplify code. Add new definitions, and X_SRC/CG/DIV will be alias to the new definitions for backwards compatibility Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Jerome Brunet
|
06b7282438
|
ASoC: meson: aiu: add audio output dt-bindings
Add the dt-bindings and documentation of the AIU audio controller. This component provides most of the audio outputs found on the Amlogic Gx SoC family. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200213155159.3235792-4-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Jerome Brunet
|
306e59cc32 |
dt-bindings: clk: meson: add the gxl internal dac gate
Add the gxl ACODEC clock id to the gxbb clock controller bindings Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> |
|
|
Horia Geantă
|
d2d46dfaa7 |
dt-bindings: clock: imx8mn: add SNVS clock
Add macro for the SNVS clock of the i.MX8MN. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Taniya Das
|
fdd373a4e0 |
dt-bindings: clock: Add RPMHCC bindings for SM8250
Add bindings and update documentation for clock rpmh driver on SM8250. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Link: https://lkml.kernel.org/r/1579905147-12142-2-git-send-email-vnkgutta@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Taniya Das
|
04ac0ad7e8 |
dt-bindings: clk: qcom: Add support for GPU GX GDSCR
In the cases where the GPU SW requires to use the GX GDSCR add support for the same. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1581307266-26989-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Jernej Skrabec
|
1de8493069
|
clk: sunxi-ng: a64: Export MBUS clock
MBUS clock will be referenced in MBUS controller node. Export it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
|
|
Linus Torvalds
|
4ef1a30c6b |
ARM: SoC: late updates
This is some material that we picked up into our tree late, or that had
more complex dependencies on more than one topic branch that makes sense
to keep separately.
- TI support for secure accelerators and hwrng on OMAP4/5
- TI camera changes for dra7 and am437x and SGX improvement due to better
reset control support on am335x, am437x and dra7
- Davinci moves to proper clocksource on DM365, and regulator/audio
improvements for DM365 and DM644x eval boards
-----BEGIN PGP SIGNATURE-----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=R7GU
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Olof Johansson:
"This is some material that we picked up into our tree late, or that
had more complex dependencies on more than one topic branch that makes
sense to keep separately.
- TI support for secure accelerators and hwrng on OMAP4/5
- TI camera changes for dra7 and am437x and SGX improvement due to
better reset control support on am335x, am437x and dra7
- Davinci moves to proper clocksource on DM365, and regulator/audio
improvements for DM365 and DM644x eval boards"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem
ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
ARM: dts: Configure interconnect target module for am437x sgx
ARM: dts: Configure sgx for dra7
ARM: dts: Configure rstctrl reset for am335x SGX
ARM: dts: dra7: Add ti-sysc node for VPE
ARM: dts: dra7: add vpe clkctrl node
ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
ARM: dts: am43xx: add support for clkout1 clock
arm: dts: dra76-evm: Add CAL and OV5640 nodes
arm: dtsi: dra76x: Add CAL dtsi node
arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
ARM: dts: DRA72: Add CAL dtsi node
ARM: dts: dra7-l4: Add ti-sysc node for CAM
ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
ARM: dts: dra7: add cam clkctrl node
ARM: OMAP2+: Drop legacy platform data for omap4 des
ARM: OMAP2+: Drop legacy platform data for omap4 sham
ARM: OMAP2+: Drop legacy platform data for omap4 aes
...
|
|
|
Linus Torvalds
|
eab3540562 |
ARM: SoC-related driver updates
Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller pieces
for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
+ Misc cleanups, refactorings of Marvell, TI, other platforms.
-----BEGIN PGP SIGNATURE-----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=ONtb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
|
|
|
Linus Torvalds
|
1afa9c3b7c |
ARM: Device-tree updates
New SoCs:
- Atmel/Microchip SAM9X60 (ARM926 SoC)
- OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants
of it with different GPU/media IP configurations.
- ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU)
- ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500)
- Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem)
- Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class)
New boards:
- Allwinner
+ Emlid Neutis SoM (H3 variant)
+ Libre Computer ALL-H3-IT
+ PineH64 Model B
- Amlogic
+ Libretech Amlogic GX PC (s905d and s912-based variants)
- Atmel/Microchip:
+ Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1)
- Marvell:
+ Armada 385-based SolidRun Clearfog GTR
- NXP:
+ Gateworks GW59xx boards based on i.MX6/6Q/6QDL
+ Tolino Shine 3 eBook reader (i.MX6sl)
+ Embedded Artists COM (i.MX7ULP)
+ SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems)
+ Google Coral Edge TPU (i.MX8MQ)
- Rockchip
+ Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs)
+ Radxa Rock Pi N10 (RK3399Pro-based)
+ VMARC RK3399Pro SOM
- ST
+ Reference boards for stm32mp15
- ST Ericsson
+ Samsung Galaxy S III mini (GT-I8190)
+ HREF520 reference board for DB8520
- TI OMAP
+ Gen1 Amazon Echo (OMAP3630-based)
- Qualcomm
+ Inforce 6640 Single Board Computer (msm8996-based)
+ SC7180 IDP (SC7180-based)
-----BEGIN PGP SIGNATURE-----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=Upyw
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Device-tree updates from Olof Johansson:
"New SoCs:
- Atmel/Microchip SAM9X60 (ARM926 SoC)
- OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all
variants of it with different GPU/media IP configurations.
- ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU)
- ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of
db8500)
- Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem)
- Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class)
New boards:
- Allwinner:
+ Emlid Neutis SoM (H3 variant)
+ Libre Computer ALL-H3-IT
+ PineH64 Model B
- Amlogic:
+ Libretech Amlogic GX PC (s905d and s912-based variants)
- Atmel/Microchip:
+ Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1)
- Marvell:
+ Armada 385-based SolidRun Clearfog GTR
- NXP:
+ Gateworks GW59xx boards based on i.MX6/6Q/6QDL
+ Tolino Shine 3 eBook reader (i.MX6sl)
+ Embedded Artists COM (i.MX7ULP)
+ SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems)
+ Google Coral Edge TPU (i.MX8MQ)
- Rockchip:
+ Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs)
+ Radxa Rock Pi N10 (RK3399Pro-based)
+ VMARC RK3399Pro SOM
- ST:
+ Reference boards for stm32mp15
- ST Ericsson:
+ Samsung Galaxy S III mini (GT-I8190)
+ HREF520 reference board for DB8520
- TI OMAP:
+ Gen1 Amazon Echo (OMAP3630-based)
- Qualcomm:
+ Inforce 6640 Single Board Computer (msm8996-based)
+ SC7180 IDP (SC7180-based)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits)
dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml
arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera
arm64: dts: ti: k3-am65-main Add CAL node
arm64: dts: ti: k3-j721e-main: Add McASP nodes
arm64: dts: ti: k3-am654-main: Add McASP nodes
arm64: dts: ti: k3-j721e: DMA support
arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss
arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
arm64: dts: ti: k3-am65: DMA support
arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
ARM: dts: aspeed: rainier: Switch PSUs to unknown version
arm64: dts: rockchip: Kill off "simple-panel" compatibles
ARM: dts: rockchip: Kill off "simple-panel" compatibles
arm64: dts: rockchip: rename dwmmc node names to mmc
ARM: dts: rockchip: rename dwmmc node names to mmc
arm64: dts: exynos: Rename Samsung and Exynos to lowercase
arm64: dts: uniphier: add reset-names to NAND controller node
...
|
|
|
Linus Torvalds
|
b34f01f76a |
linux-watchdog 5.6-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAl48a0YACgkQ+iyteGJfRsoOcQCeMHtMpkUEYQa6X/bMkEnlu9DT bhEAoN0fFm53Y/SVPipe/r1+0JQOkMoI =/D+E -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add IT8786 chipset ID - addition of sam9x60 compatible watchdog - da9062 improvements - fix UAF in reboot notifier handling in watchdog core code - other fixes and small improvements * tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: make restart handler atomic safe watchdog: mtk_wdt: mt2712: Add reset controller watchdog: mtk_wdt: mt8183: Add reset controller dt-bindings: mediatek: mt2712: Add #reset-cells dt-bindings: mediatek: mt8183: Add #reset-cells dt-bindings: watchdog: da9062: add suspend disable option watchdog: it87_wdt: add IT8786 ID watchdog: dw_wdt: ping watchdog to reset countdown before start watchdog: fix UAF in reboot notifier handling in watchdog core code watchdog: cadence: Skip printing pointer value watchdog: qcom: Use platform_get_irq_optional() for bark irq watchdog: da9062: add power management ops watchdog: make DesignWare watchdog allow users to set bigger timeout value drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog |
|
|
Linus Torvalds
|
f4a6365ae8 |
There are a few changes to the core framework this time around, in addition to
the normal collection of driver updates to support new SoCs, fix incorrect
data, and convert various drivers to clk_hw based APIs.
In the core, we allow clk_ops::init() to return an error code now so that we
can fail clk registration if the callback does something like fail to allocate
memory. We also add a new "terminate" clk_op so that things done in
clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now
when critical clks fail to enable and we support changing clk rates and
enable/disable state through debugfs when developers compile the kernel
themselves.
On the driver front, we get support for what seems like a lot of Qualcomm and
NXP SoCs given that those vendors dominate the diffstat. There are a couple new
drivers for Xilinx and Amlogic SoCs too. The updates are all small things like
fixing the way glitch free muxes switch parents, avoiding div-by-zero problems,
or fixing data like parent names. See the updates section below for more
details.
Finally, the "basic" clk types have been converted to support specifying
parents with clk_hw pointers. This work includes an overhaul of the fixed-rate
clk type to be more modern by using clk_hw APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting
-----BEGIN PGP SIGNATURE-----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=UjXu
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There are a few changes to the core framework this time around, in
addition to the normal collection of driver updates to support new
SoCs, fix incorrect data, and convert various drivers to clk_hw based
APIs.
In the core, we allow clk_ops::init() to return an error code now so
that we can fail clk registration if the callback does something like
fail to allocate memory. We also add a new "terminate" clk_op so that
things done in clk_ops::init() can be undone, e.g. free memory. We
also spit out a warning now when critical clks fail to enable and we
support changing clk rates and enable/disable state through debugfs
when developers compile the kernel themselves.
On the driver front, we get support for what seems like a lot of
Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
There are a couple new drivers for Xilinx and Amlogic SoCs too. The
updates are all small things like fixing the way glitch free muxes
switch parents, avoiding div-by-zero problems, or fixing data like
parent names. See the updates section below for more details.
Finally, the "basic" clk types have been converted to support
specifying parents with clk_hw pointers. This work includes an
overhaul of the fixed-rate clk type to be more modern by using clk_hw
APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
clk: ls1028a: Fix warning on clamp() usage
clk: qoriq: add ls1088a hwaccel clocks support
clk: ls1028a: Add clock driver for Display output interface
dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
clk: fsl-sai: new driver
dt-bindings: clock: document the fsl-sai driver
clk: composite: add _register_composite_pdata() variants
clk: qcom: rpmh: Sort OF match table
dt-bindings: fix warnings in validation of qcom,gcc.yaml
dt-binding: fix compilation error of the example in qcom,gcc.yaml
clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
clk: zynqmp: Fix divider calculation
clk: zynqmp: Add support for get max divider
clk: zynqmp: Warn user if clock user are more than allowed
clk: zynqmp: Extend driver for versal
dt-bindings: clock: Add bindings for versal clock driver
clk: ti: clkctrl: Fix hidden dependency to node name
clk: ti: add clkctrl data dra7 sgx
clk: ti: omap5: Add missing AESS clock
...
|
|
|
Stephen Boyd
|
db865ee447 |
Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', 'clk-freescale' and 'clk-qoriq' into clk-next
- Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings |
|
|
Stephen Boyd
|
6e7a9f0c4e |
Merge branches 'clk-debugfs-danger', 'clk-basic-hw', 'clk-renesas', 'clk-amlogic' and 'clk-allwinner' into clk-next
- Support dangerous debugfs actions on clks with dead code - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs * clk-debugfs-danger: clk: Add support for setting clk_rate via debugfs * clk-basic-hw: clk: divider: Add support for specifying parents via DT/pointers clk: gate: Add support for specifying parents via DT/pointers clk: mux: Add support for specifying parents via DT/pointers clk: asm9260: Use parent accuracy in fixed rate clk clk: fixed-rate: Document that accuracy isn't a rate clk: fixed-rate: Add clk flags for parent accuracy clk: fixed-rate: Add support for specifying parents via DT/pointers clk: fixed-rate: Document accuracy member clk: fixed-rate: Move to_clk_fixed_rate() to C file clk: fixed-rate: Remove clk_register_fixed_rate_with_accuracy() clk: fixed-rate: Convert to clk_hw based APIs clk: gpio: Use DT way of specifying parents * clk-renesas: clk: renesas: Prepare for split of R-Car H3 config symbol dt-bindings: clock: renesas: cpg-mssr: Fix r8a774b1 typo clk: renesas: r7s9210: Add SPIBSC clock clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks clk: renesas: Remove use of ARCH_R8A7796 clk: renesas: rcar-gen2: Change multipliers and dividers to u8 * clk-amlogic: clk: clarify that clk_set_rate() does updates from top to bottom clk: meson: meson8b: make the CCF use the glitch-free mali mux clk: meson: pll: Fix by 0 division in __pll_params_to_rate() clk: meson: g12a: fix missing uart2 in regmap table clk: meson: meson8b: use of_clk_hw_register to register the clocks clk: meson: meson8b: don't register the XTAL clock when provided via OF clk: meson: meson8b: change references to the XTAL clock to use [fw_]name clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding * clk-allwinner: clk: sunxi: a23/a33: Export the MIPI PLL clk: sunxi: a31: Export the MIPI PLL clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock clk: sunxi-ng: r40: Export MBUS clock clk: sunxi: use of_device_get_match_data |
|
|
Linus Torvalds
|
701a9c8092 |
Char/Misc driver changes for 5.6-rc1
Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFKeQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynjVACgg6JWfOyPCnz3GfRD1vQZyUl+Hg0An1H+Eh08 +LQk5Qpb3vVwBpCp6qR3 =MB+D -----END PGP SIGNATURE----- Merge tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ... |
|
|
Linus Torvalds
|
aac9662671 |
USB/Thunderbolt/PHY driver updates for 5.6-rc1
Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFTNw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynpKQCgrh2FoobS2x0oFg/OUHdjokQV/BYAoJGWLOmt 8S5cnsCuLq3w5qpCcBva =PMGd -----END PGP SIGNATURE----- Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ... |
|
|
Linus Torvalds
|
abb22e44cf |
- Depromote debug print on the db8500 platform (Linus Walleij)
- Fix compilation warning when compiling with make W=1 (Amit Kucheria) - Code cleanup and refactoring, regmap conversion and add hwmon support on Qoriq (Andrey Smirnov) - Add an idle injection cpu cooling device and its documentation, rename the cpu_cooling device to cpufreq_cooling device (Daniel Lezcano) - Convert unexported functions to static, add the __init annotation in the thermal-of code and remove the pointless wrapper functions (Daniel Lezcano) - Fix register offset for Armada XP and register reset bit initialization (Zak Hays) - Enable hwmon on the rockchip (Stefan Schaeckeler) - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform and their device tree bindings, followed by a fix for the ths number and the sparse warnings (Yangtao Li) - Code cleansup for the sun8i and hwmon support (Yangtao Li) - Silent some messages which are misleading given the changes made in the previous version on generic-adc (Martin Blumenstingl) - Rename exynos to Exynos (Krzysztof Kozlowski) - Add the bcm2711 thermal driver with the device tree bindings (Stefan Wahren) - Use usleep_range() instead of udelay() as the call is always done in a sleep-able context (Geert Uytterhoeven) - Do code cleanup and re-organization to set the scene for a new process for the brcmstb (Florian Fainelli) - Fix bindings check issues on brcm (Stefan Wahren) - Add Jasper Lake support on int340x (Nivedita Swaminathan) - Add Comet Lake support on intel pch (Gayatri Kammela) - Fix unmatched pci_release_region() on x86 (Chuhong Yuan) - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund) - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is called with the of-node is missing (Peter Mamonov) - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal Paillet) -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRuKdf4M92Gi9vqihve5qtOL396pgUCXjAFCAAKCRDe5qtOL396 prIfAQCjhNWKqP3U4oewia9p8dwwfsOpJMqUXge/k6sKzAqscAD/Rg4lWXaayOsX OWKhS/iL5eN7aXVnSH4MxONsTWhLTAs= =eZkX -----END PGP SIGNATURE----- Merge tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Depromote debug print on the db8500 platform (Linus Walleij) - Fix compilation warning when compiling with make W=1 (Amit Kucheria) - Code cleanup and refactoring, regmap conversion and add hwmon support on Qoriq (Andrey Smirnov) - Add an idle injection cpu cooling device and its documentation, rename the cpu_cooling device to cpufreq_cooling device (Daniel Lezcano) - Convert unexported functions to static, add the __init annotation in the thermal-of code and remove the pointless wrapper functions (Daniel Lezcano) - Fix register offset for Armada XP and register reset bit initialization (Zak Hays) - Enable hwmon on the rockchip (Stefan Schaeckeler) - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform and their device tree bindings, followed by a fix for the ths number and the sparse warnings (Yangtao Li) - Code cleansup for the sun8i and hwmon support (Yangtao Li) - Silent some messages which are misleading given the changes made in the previous version on generic-adc (Martin Blumenstingl) - Rename exynos to Exynos (Krzysztof Kozlowski) - Add the bcm2711 thermal driver with the device tree bindings (Stefan Wahren) - Use usleep_range() instead of udelay() as the call is always done in a sleep-able context (Geert Uytterhoeven) - Do code cleanup and re-organization to set the scene for a new process for the brcmstb (Florian Fainelli) - Fix bindings check issues on brcm (Stefan Wahren) - Add Jasper Lake support on int340x (Nivedita Swaminathan) - Add Comet Lake support on intel pch (Gayatri Kammela) - Fix unmatched pci_release_region() on x86 (Chuhong Yuan) - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund) - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is called with the of-node is missing (Peter Mamonov) - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal Paillet) * tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (66 commits) thermal: stm32: Fix low threshold interrupt flood thermal: stm32: Improve temperature computing thermal: stm32: Handle multiple trip points thermal: stm32: Disable interrupts at probe thermal: stm32: Rework sensor mode management thermal: stm32: Fix icifr register name thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing thermal: rcar_gen3_thermal: Remove temperature bound thermal: rcar_thermal: Remove temperature bound thermal: intel: intel_pch_thermal: Add Comet Lake (CML) platform support thermal: intel: Fix unmatched pci_release_region thermal: int340x: processor_thermal: Add Jasper Lake support dt-bindings: brcm,avs-ro-thermal: Fix binding check issues thermal: brcmstb_thermal: Register different ops per process thermal: brcmstb_thermal: Restructure interrupt registration thermal: brcmstb_thermal: Add 16nm process thermal parameters dt-bindings: thermal: Define BCM7216 thermal sensor compatible thermal: brcmstb_thermal: Prepare to support a different process thermal: brcmstb_thermal: Do not use DT coefficients thermal: rcar_thermal: Use usleep_range() instead of udelay() ... |
|
|
Linus Torvalds
|
3d3b44a61a |
The interrupt departement provides:
- A mechanism to shield isolated tasks from managed interrupts:
The affinity of managed interrupts is completely controlled by the
kernel and user space has no influence on them. The reason is that
the automatically assigned affinity correlates to the multi-queue
CPU handling of block devices.
If the generated affinity mask spaws both housekeeping and isolated CPUs
the interrupt could be routed to an isolated CPU which would then be
disturbed by I/O submitted by a housekeeping CPU.
The new mechamism ensures that as long as one housekeeping CPU is online
in the assigned affinity mask the interrupt is routed to a housekeeping
CPU.
If there is no online housekeeping CPU in the affinity mask, then the
interrupt is routed to an isolated CPU to keep the device queue intact,
but unless the isolated CPU submits I/O by itself these interrupts are
not raised.
- A small addon to the device tree irqdomain core code to avoid
duplication in irq chip drivers
- Conversion of the SiFive PLIC to hierarchical domains
- The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI, NXP
INTMUX, Meson A1 GPIO
- The first cut of support for the new ARM GICv4.1
- The usual pile of fixes and improvements in core and driver code
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl4vcbETHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoezyEADBPf0ipu5+KeTtCR+DjRAO8o0wM0J/
JNkRkSrS/qENSda/d6pZE2AWpqlDOs6apg+SNGkv0knM+1Xy94nLOf4zJBsR+GW0
w2jw68egnyB2QZtm/BvOJL+qCoixcObg5sLt0165pDdKzyDNWeCMtRU+QAw42T/l
WC2QrhjKKqYST1m+UgDf1UXz8TDGIW4muRP9UiG0Uwc0LU6cG2H4OmGn0bYissaT
JTG75pzGqUH3kZ1a1qD28nGyoY85BXz1iV5/IvIPaQbkQARbvfMbh1KvAnGhJj7N
96rjMpOGv2/kv1FI+4FUy6w5Wn4EyW2OaCtB/oUCFNcZvrNNgvglxCRQkkO8yb3D
VOOm595ICm3EnIfxBpSzhgvVl5MY39g6qRb6Rpnna+8eRtrYnytMBdvhY0OGlG8/
cZYZDay0nzhY6vq023iw1YMDKqft7TR1R+6w1iPL7nXHXW99Dhv87d1Fjt0CqphD
NIoNDgxciIyfMbMBvcg1qPe/g3L8+cAKNzGsIwIU9GneEZFBk3/piGcBlFpoEEOK
2QKvks3QRXMx+qVWkIqy3LZKV9EAQlb9Lpjaa1ec5d4m/EdACm19OpZpqoCljPtw
9vdaMz4ZxvUbwjih3VnVPklZCiVGiKj1j0iw5v3FCHh4MUljzCrxNMqK/U9CR8H0
uid3EX8YMi+DXA==
=E2VR
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The interrupt departement provides:
- A mechanism to shield isolated tasks from managed interrupts:
The affinity of managed interrupts is completely controlled by the
kernel and user space has no influence on them. The reason is that
the automatically assigned affinity correlates to the multi-queue
CPU handling of block devices.
If the generated affinity mask spaws both housekeeping and isolated
CPUs the interrupt could be routed to an isolated CPU which would
then be disturbed by I/O submitted by a housekeeping CPU.
The new mechamism ensures that as long as one housekeeping CPU is
online in the assigned affinity mask the interrupt is routed to a
housekeeping CPU.
If there is no online housekeeping CPU in the affinity mask, then
the interrupt is routed to an isolated CPU to keep the device queue
intact, but unless the isolated CPU submits I/O by itself these
interrupts are not raised.
- A small addon to the device tree irqdomain core code to avoid
duplication in irq chip drivers
- Conversion of the SiFive PLIC to hierarchical domains
- The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI,
NXP INTMUX, Meson A1 GPIO
- The first cut of support for the new ARM GICv4.1
- The usual pile of fixes and improvements in core and driver code"
* tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
genirq, sched/isolation: Isolate from handling managed interrupts
irqchip/gic-v4.1: Allow direct invalidation of VLPIs
irqchip/gic-v4.1: Suppress per-VLPI doorbell
irqchip/gic-v4.1: Add VPE INVALL callback
irqchip/gic-v4.1: Add VPE eviction callback
irqchip/gic-v4.1: Add VPE residency callback
irqchip/gic-v4.1: Add mask/unmask doorbell callbacks
irqchip/gic-v4.1: Plumb skeletal VPE irqchip
irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP
irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set
irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP
irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation
irqchip/gic-v3: Add GICv4.1 VPEID size discovery
irqchip/gic-v3: Detect GICv4.1 supporting RVPEID
irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbells
irqdomain: Fix a memory leak in irq_domain_push_irq()
irqchip: Add NXP INTMUX interrupt multiplexer support
dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer
irqchip: Define EXYNOS_IRQ_COMBINER
irqchip/meson-gpio: Add support for meson a1 SoCs
...
|
|
|
Linus Torvalds
|
a5b871c91d |
dmaengine updates for v5.6-rc1
- Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
- New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver
-----BEGIN PGP SIGNATURE-----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=mv1v
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time we have a bunch of core changes to support dynamic channels,
hotplug of controllers, new apis for metadata ops etc along with new
drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.
Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver"
* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
dmaengine: Create symlinks between DMA channels and slaves
dmaengine: hisilicon: Add Kunpeng DMA engine support
dmaengine: idxd: add char driver to expose submission portal to userland
dmaengine: idxd: connect idxd to dmaengine subsystem
dmaengine: idxd: add descriptor manipulation routines
dmaengine: idxd: add sysfs ABI for idxd driver
dmaengine: idxd: add configuration component of driver
dmaengine: idxd: Init and probe for Intel data accelerators
dmaengine: add support to dynamic register/unregister of channels
dmaengine: break out channel registration
x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
dmaengine: Remove dma_request_slave_channel_compat() wrapper
dmaengine: Remove dma_device_satisfies_mask() wrapper
dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
dmaengine: zynqmp_dma: fix burst length configuration
dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
dmaengine: fsl-qdma: fix duplicated argument to &&
...
|
|
|
yong.liang
|
fe42cc30a9 |
dt-bindings: mediatek: mt2712: Add #reset-cells
Add #reset-cells and update mtk-wdt.txt Signed-off-by: yong.liang <yong.liang@mediatek.com> Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <groeck7@gmail.com> Link: https://lore.kernel.org/r/20200115085828.27791-3-yong.liang@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> |
|
|
yong.liang
|
f43f97a0fc |
dt-bindings: mediatek: mt8183: Add #reset-cells
Add #reset-cells property and update example Signed-off-by: yong.liang <yong.liang@mediatek.com> Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <groeck7@gmail.com> Link: https://lore.kernel.org/r/20200115085828.27791-2-yong.liang@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> |
|
|
Krzysztof Kozlowski
|
ca07ee4e3d |
thermal: exynos: Rename Samsung and Exynos to lowercase
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200104152107.11407-7-krzk@kernel.org |
|
|
Rajan Vaja
|
352546805a |
dt-bindings: clock: Add bindings for versal clock driver
Add documentation to describe Xilinx Versal clock driver bindings. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/1575527759-26452-2-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Tony Lindgren
|
723a567f43 |
ARM: dts: Add missing omap5 secure clocks
The secure clocks on omap5 are similar to what we already have for dra7 with dra7_l4sec_clkctrl_regs and documented in the omap5432 TRM in "Table 3-1044. CORE_CM_CORE Registers Mapping Summary". The secure clocks are part of the l4per clock manager. As the l4per clock manager has now two clock domains as children, let's also update the l4per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Compared to omap4, omap5 has more clocks working in hardare autogating mode. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Tony Lindgren
|
cfcbc2dbb7 |
ARM: dts: Add missing omap4 secure clocks
The secure clocks on omap4 are similar to what we already have for dra7 in dra7_l4sec_clkctrl_regs and documented in the omap4460 TRM "Table 3-1346 L4PER_CM2 Registers Mapping Summary". The secure clocks are part of the l4_per clock manager. As the l4_per clock manager has now two clock domains as children, let's also update the l4_per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Greg Kroah-Hartman
|
10d3e38c79 |
interconnect patches for 5.6
Here are the interconnect patches for the 5.6-rc1 merge window. - New core helper functions for some common functionalities in drivers. - Improvements in the information exposed via debugfs. - Basic tracepoints support. - New interconnect driver for msm8916 platforms. - Misc fixes. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJeIXe2AAoJEIDQzArG2BZjmToQAMijCGSN8TkzoS1/9w95ML9Q vbth57JAjHRoigpIt2nVP9c/oIAqxprIB+ZsXX6pKUtnRVTJo/gviQEw1UCqMp58 d1v2Yb/b8lyzAbXdiVHbFKjF7pdNRUZDraMZ7HSC3UGD1LIy5cx0YjqwYyWFJEz6 +9Ko3uDYEGqh3HM4Ybl5X5F019tdYY8TrTpajnKnh9yQDh3SAzw5mEDc7PuldAFn jgd0KVx56LRKWpA7SKfCjfsS8h4Ft48yzaUATJdNlcihl09mvNYcJ8ZHrGod/n/B cBKSwdaKwK0/LuGHrEM6I4UmbbfTmiNJ9dImtMwo5XapBG+OFBNhcVukJrW5xINe D3N9hXdUWSnnQyT+sOm8U3cL70PiueKP/CofhEJ4UxBrlckYfPGCZLLTAi4+dfPS T2rTonMGNIBCoqZ7iLDGff8uVQxGfOJkdNfd/UpJ64OLshQIXU+WQfa9PbVzkTly 5opGJlU4X261S3lxxYCKFAP0QGUyDvrzItSMBegcDvUFFwQN06ISMYdXp0VJh3xk vYXV3vokqKJZcU8/YBGlZU8DAlHMxtEETt2B+Ua2tuYMzyHFWd76aQt3q7Id0xRB Dp6FoZROyBMgH00FCAdAK25dhL0M2CiUpSjmgDXprZeMX1YJRz24zR4u+fJOmq5g XZpJM/HIdRlq9pHHEZ/h =5hpf -----END PGP SIGNATURE----- Merge tag 'icc-5.6-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next Georgi writes: interconnect patches for 5.6 Here are the interconnect patches for the 5.6-rc1 merge window. - New core helper functions for some common functionalities in drivers. - Improvements in the information exposed via debugfs. - Basic tracepoints support. - New interconnect driver for msm8916 platforms. - Misc fixes. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.6-rc1' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: qcom: Add MSM8916 interconnect provider driver dt-bindings: interconnect: Add Qualcomm MSM8916 DT bindings interconnect: Check for valid path in icc_set_bw() interconnect: Print the tag in the debugfs summary interconnect: Add interconnect_graph file to debugfs interconnect: qcom: Use the standard aggregate function interconnect: Add a common standard aggregate function interconnect: Add basic tracepoints interconnect: Add a name to struct icc_path interconnect: Move internal structs into a separate file interconnect: qcom: Use the new common helper for node removal interconnect: Add a common helper for removing all nodes |
|
|
Greg Kroah-Hartman
|
dd7d99dc68 |
Merge 5.5-rc7 into usb-next
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Olof Johansson
|
684415d0de |
cmdq:
- clean ups of unused code and debuggability - add cmdq_instruction to make the function call interface more readable - add functions for polling and providing info for the user of cmdq scpsys: - add bindings for MT6765 -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAl4cPekXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH6YDA/+MRYiMb26fu+Ac3pF1SW6ao0A fCI0JH2L8Zj4nklg3Y/hoi2PG7DJL2vaG71Ng3iQxQqKLWJdS1WbF/DBl8JdozQx mJXXZ0JM5cc/gIvrG8PLAauWRTDUIPDC2ZZ66mO4CiR6T7Kp/LpnmZF5ZR4qxu/W KNAYxSeyPJ36WQ3HCmubBWOn4JaetOeBFID6z3roKhsGyFXLmCo0Djw4c0Lpk79t 3qVpo7TcC3hintZSC8ufIjQZA/KU3kwy3pS2O+HKMDb4EwORl14Grd6/cN9rAf0p twprn4Y9Jx4cBy0jGyZShKMbIn6wT6zF8GqpoV71vvXTgknyr8XoaiepnjMd2Enm BXw7R8kUt3w4mHnMwX9aUPAP48S1DVMm0OsbwOOqRcSXyJWnQBFB85LnkKeSfzRW iWfeXQBaESCQziYkJSkXz2D4epV/Rzq/L1y5IrddQuwIlpQ3eeqYUWBDYhuV3VlY K4r/AawG0NKPWTvH0bgLZAiWybnzXPZUvVJzwkdwRBjpiyhsl0FX1oZb1H8Vf6mK yrCUgaTIVp6z0pMd8kaxPTyi2AXryKODOXp+XJ2JFmdLFuBPQMSLCiG+B6sDa2Sw eYMcZpFtL5B/p/NpNuSUlGZ2HXTxknS3RnIDTUJ583BZLeItShHnBW3P/8qjx7Wm 8oGsLh0ZLF0G5iqdeuM= =Q9/6 -----END PGP SIGNATURE----- Merge tag 'v5.5-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers cmdq: - clean ups of unused code and debuggability - add cmdq_instruction to make the function call interface more readable - add functions for polling and providing info for the user of cmdq scpsys: - add bindings for MT6765 * tag 'v5.5-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define soc: mediatek: cmdq: add cmdq_dev_get_client_reg function soc: mediatek: cmdq: add polling function soc: mediatek: cmdq: define the instruction struct soc: mediatek: cmdq: remove OR opertaion from err return Link: https://lore.kernel.org/r/9b365e76-e346-f813-d750-d7cfd0d16e4e@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Eddie James
|
5350a237b4 |
dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller
Document the Aspeed SCU interrupt controller and add an include file for the interrupts it provides. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1579123790-6894-2-git-send-email-eajames@linux.ibm.com |
|
|
Tony Lindgren
|
957ad44ff5 |
clk: ti: add clkctrl data dra7 sgx
This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately. Cc: Benoit Parrot <bparrot@ti.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tony Lindgren
|
364975eeb4 |
clk: ti: omap5: Add missing AESS clock
Looks like we're missing AESS clock for omap5. This is similar to what omap4 has. Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Benoit Parrot
|
7dfd5e619d |
clk: ti: dra7: add vpe clkctrl data
Add clkctrl data for VPE. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Benoit Parrot
|
7054c14f05 |
clk: ti: dra7: add cam clkctrl data
Add clkctrl data for CAM domain. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Peter Ujfalusi
|
8e28918a85 |
dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock
Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Jyri Sarha
|
8a79db5e83 |
dt-bindings: phy: Add PHY_TYPE_DP definition
Add definition for DisplayPort phy type. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> |
|
|
Olof Johansson
|
a0be47376f |
ARM: dts: Amlogic updates for v5.6
- add DDR clock controller - GPU OPP updates -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl4XcxQACgkQWTcYmtP7 xmVjBhAAqL8rNKURAhAs7TkdgXxv3DGA1BlcMi0Sb/iuwlNBu5AbptO31FY7Jqb1 ZZ/GFRUljj1BHapjzekdMJUpqwQdPOtDKSrlhc65BkkAcgzXkzTlvvNiS/8/hMEC RNrmT+O/YgOys/FpSc2wPdzg6WAgql9vhG0pAlI7gth3tPZxQosLTlzNDJ3yW9+K qhPx5ivF1Q3w6TPnM0Q4eZj4MHnUSeQUDc6aA1b02V1ojt6pqeBkzVFzXyxdxWNs yp3E8tLmNhQ6p2B3kCPTDt2H4jH1wEei1CrsnZFB4WMu80EoWnNi+VjsoBajmlR2 lufMkX623K47NlZiZ7/XQZ0ki5/09TqDJ4W53mPrpebJ7Cmw8sdSz/tMZ7cOveh0 FRa4VCSTiq4BxfdFks4vXPLDX40ucTXHA26jc1Hrrbb7n6uC93i87I5At7U03SY7 r4Lddd/1Rh6du7hLmxAEM5Ul9M5m82GYFYXgNKngsJHUxz/V1/Ym+rSzBFM/csBj U2maAFYvvR8B3WBQfpONIYgUo5gJ8YgxglmboivZM226VgalPzsMtEm467xvROKn xT7knR/pHu9wWL6OxCZGXsEQfjJM3FKn6Z1Fe2VolJpaouULdqBxWfRtnSMUwmgG E/WqojV/8AOZSSqj6/ixQBr2Soaaim/Q2LmM81lBjcJ+bTCtSlA= =CTqX -----END PGP SIGNATURE----- Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.6 - add DDR clock controller - GPU OPP updates * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: use the actual frequency for the GPU's 364MHz OPP ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP ARM: dts: meson8b: fix the clock controller compatible string ARM: dts: meson8b: add the DDR clock controller ARM: dts: meson8: add the DDR clock controller ARM: dts: meson: provide the XTAL clock using a fixed-clock dt-bindings: clock: meson8b: add the clock inputs dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding Link: https://lore.kernel.org/r/7hwo9udi7m.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
333505a406 |
Qualcomm driver updates for v5.6
* SCM major refactoring and cleanup * Properly flag active only power domains as active only * Add SC7180 and SM8150 RPMH power domains * Return EPROBE_DEFER from QMI if packet family is not yet available -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl4czaUbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FgKkP/1QC1e9VUQ5xc25A+2g0 5fVbOUkQxHLsPtTuN2GUwlxo5dj/dTnvXrQziQLfSGeAhX8FRNnImH0NCwNt7vmU i8XeRV/+Biv5IXhdM5k7IgT5bIwj3cQbzfswUL9KcCBxceJs8WDhtiu2MxeZh1g2 Gjq5+pRpC8yOC3v8AiFDWINoBduBqJGwucBtIE33/+29RqN4b7hLl4WK75yvp2Ce mpnB0Pl7GcvVeQZNAogUQW1u7kogmq+ByqBhpYXhlhUGw/CYSF2gIdfU6piiEJCz GWYfslABgYcGJGwMu+1RGVxe5+5I21ONUj2t8ichS5kmIZQ1lnavEAeGJ6cM8G3Y kDsQSE5eTfFJ13lX0HXCd6COUS6ZBV0xcoUek+gvzIu94U9l2D/qINf9kX91cPFq OSJlFJG1Yx9rcL1j1ROhDMMvuzr9QYslZZyGTRwVIwXLMQRT3Xzpx4qzATgWme5H vPJ55dMtxAWPk5NqxHurFbDP5nIRPyJ1M7IgjTJQrWp97mXx3+RCKdO6UEeqJu/1 wdp7IwziErNjOAbFgdboFdncFOEvwctwayDOEjb7gZE8WsSCa1LwXWZfXulkaOcC MTYnLZKZJtRJiy8WT/NvIukc60CnjYMj6IV1Vkem6NGSkvglhpRCGrxUuKi76+JR 5vPfeYhJ79KlkTWSr8lhh5VG =IcVk -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.6 * SCM major refactoring and cleanup * Properly flag active only power domains as active only * Add SC7180 and SM8150 RPMH power domains * Return EPROBE_DEFER from QMI if packet family is not yet available * tag 'qcom-drivers-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (27 commits) firmware: qcom_scm: Dynamically support SMCCC and legacy conventions firmware: qcom_scm: Remove thin wrappers firmware: qcom_scm: Order functions, definitions by service/command firmware: qcom_scm-32: Add device argument to atomic calls firmware: qcom_scm-32: Create common legacy atomic call firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls firmware: qcom_scm-32: Add funcnum IDs firmware: qcom_scm-32: Use SMC arch wrappers firmware: qcom_scm-64: Improve SMC convention detection firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc firmware: qcom_scm-64: Add SCM results struct firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc firmware: qcom_scm-64: Make SMC macros less magical firmware: qcom_scm: Remove unused qcom_scm_get_version firmware: qcom_scm: Apply consistent naming scheme to command IDs firmware: qcom_scm: Rename macros and structures soc: qcom: rpmhpd: Set 'active_only' for active only power domains firmware: scm: Add stubs for OCMEM and restore_sec_cfg_available dt-bindings: power: rpmpd: Convert rpmpd bindings to yaml ... Link: https://lore.kernel.org/r/20200113204405.GD3325@yoga Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
e64d0098dd |
dt-bindings: Changes for v5.6-rc1
This contains a conversion of the Tegra124 EMC bindings to json-schema as well as the addition of the bindings for the memory subsystem found on Tegra186 and Tegra194. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl4ZDFwTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoQf4EACrBQLZaB/icm92vqFk4zt39sdmxTat 7SmBbhe5LdXplMIV5xZY07DscRgl7RHfcxX1Sl6IOo78oKodEhM6USd8juwobq+E GcOVgZ3v+fLTiFIOQcOI3Sa96jq/E+sPzQzgD45foF79xlSox79s5dE4xXjCKG8b mN5zEpZYaIkbOxsLqdKSb4p45XUIVB9YYhRPNNds5j7gEg0UgufnrRLp/r1QPDzS RjMCngFEAs9bat8N2JUJJS9xvQM8KamW/HIwkpBQLujkBfuO+QHqpNrRhe5h2hOn Ui3Y5Lbn4eCvac0nfr9APK0j++BkRKW+2i+2R0YTx8ZqqpDwl4ox4cJDKwtk46Xh KcBkvcvwAQE4NjnEUDBwRRlW446SqfVpnRhTM5y+MHhSG/SyLx4PMydahhsdUNpk eeCVOyiEOQufwBHd4waR+M0tHUqgc1gQ5xdKZ6f5vKhQEGlMcu0L9jlgDNZaOg7L LWFqqzNnRdmdS4plctv67DqbjXBUZ73wxgs2OjUofP+MGUVT2jUjLbW7XmAfl903 5LwXx8mMZIjEnYo84IyylYDC/u8FGT3T4RnFWNuWrjHCz7+qVv+2v3CF6fBFrL// KcZY5m/Kb04dSmQCvW2/2D3LnLGDgg8p3vzUgmBw1VRpfPVvvhY1JFdVBcw9S0iI 6poWBdVfrMEsag== =iPZ2 -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.6-rc1 This contains a conversion of the Tegra124 EMC bindings to json-schema as well as the addition of the bindings for the memory subsystem found on Tegra186 and Tegra194. * tag 'tegra-for-5.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: Add Tegra186 memory subsystem dt-bindings: memory: Add Tegra194 memory controller header dt-bindings: memory: Add Tegra186 memory client IDs dt-bindings: memory-controller: Convert Tegra124 EMC to json-schema Link: https://lore.kernel.org/r/20200111003553.2411874-1-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Anson Huang
|
1088691447 |
dt-bindings: imx: Add clock binding doc for i.MX8MP
Add the clock binding doc for i.MX8MP. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Mars Cheng
|
56f6737167 |
dt-bindings: mediatek: add MT6765 power dt-bindings
This adds power dt-bindings for MT6765 Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Owen Chen <owen.chen@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
|
|
Sricharan R
|
d15b1ff1bd |
clk: qcom: Add DT bindings for ipq6018 gcc clock controller
Add the compatible strings and the include file for ipq6018 gcc clock controller. Co-developed-by: Anusha Canchi Ramachandra Rao <anusharao@codeaurora.org> Signed-off-by: Anusha Canchi Ramachandra Rao <anusharao@codeaurora.org> Co-developed-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Co-developed-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Link: https://lkml.kernel.org/r/1578557121-423-2-git-send-email-sricharan@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Thierry Reding
|
a213f9f1c3 |
dt-bindings: memory: Add Tegra194 memory controller header
This header contains definitions for the memory controller found on NVIDIA Tegra194 SoCs, such as the stream IDs used for the ARM SMMU and the IDs used to identify the various memory clients. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> |
|
|
Thierry Reding
|
96b0239bbd |
dt-bindings: memory: Add Tegra186 memory client IDs
Add IDs for the memory clients found on NVIDIA Tegra186 SoCs. This will be used to describe interconnect paths from devices to system memory. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> |
|
|
Georgi Djakov
|
ebb37bd064 |
dt-bindings: interconnect: Add Qualcomm MSM8916 DT bindings
The Qualcomm MSM8916 platform has several bus fabrics that could be controlled and tuned dynamically according to the bandwidth demand. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> |
|
|
Lubomir Rintel
|
247aa9e4d2 |
dt-bindings: marvell,mmp2: Add clock ids for the HSIC clocks
There are two USB HSIC controllers on MMP2 and MMP3. Link: https://lore.kernel.org/r/20191220065314.237624-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Taniya Das
|
4cc62ebd0c |
dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings
Add device tree bindings for video clock controller for Qualcomm Technology Inc's SC7180 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/1577428714-17766-6-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Taniya Das
|
468e727d18 |
dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings
Add device tree bindings for graphics clock controller for Qualcomm Technology Inc's SC7180 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/1577428714-17766-3-git-send-email-tdas@codeaurora.org [sboyd@kernel.org: Indicate sc7180 in commit subject] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Maxime Ripard
|
9c232d324b
|
clk: sunxi: a23/a33: Export the MIPI PLL
The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
|
|
Maxime Ripard
|
a655ede064
|
clk: sunxi: a31: Export the MIPI PLL
The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
|
|
Vasily Khoruzhick
|
a9b5c67178
|
clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS
Export CLK_CPUX so we can reference it in CPU node. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
|
|
Chen-Yu Tsai
|
b406cadbc8
|
clk: sunxi-ng: r40: Export MBUS clock
The MBUS clock needs to be referenced in the MBUS device node. Export it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
|
|
Tomer Maimon
|
a5df0d4e9d |
dt-bindings: reset: Add binding constants for NPCM7xx reset controller
Add device tree binding constants for Nuvoton BMC NPCM7xx reset controller. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
|
|
Taniya Das
|
75616da712 |
dt-bindings: clock: Introduce QCOM sc7180 display clock bindings
Add device tree bindings for display clock controller for Qualcomm Technology Inc's SC7180 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1573812245-23827-3-git-send-email-tdas@codeaurora.org Reviewed-by: Rob Herring <robh@kernel.org> [sboyd@kernel.org: Add sc7180 to subject] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Jeffrey Hugo
|
db2c7c0a04 |
clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk
gcc_bimc_gfx_clk is a required clock for booting the GPU and GPU SMMU.
Fixes:
|
|
|
周琰杰 (Zhou Yanjie)
|
b98900548b |
dt-bindings: dmaengine: Add X1830 bindings.
Add the dmaengine bindings for the X1830 Soc from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1576591140-125668-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
|
|
Jeffrey Hugo
|
e6494bf65a |
dt-bindings: clock: Add support for the MSM8998 mmcc
Document the multimedia clock controller found on MSM8998. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/1576596018-10140-1-git-send-email-jhugo@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Taniya Das
|
c1079b4ec1 |
clk: qcom: dispcc: Add support for display port clocks
SDM845 dispcc supports RCG and CBCRs for display port, so add support for the same. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/20190731182713.8123-3-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Sibi Sankar
|
52a4cb577b |
dt-bindings: power: Add rpmh power-domain bindings for sc7180
Add RPMH power-domain bindings for the SC7180 family of SoCs. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/0101016e7f99ca4e-47d442f4-b923-4eea-b812-898e5476beab-000000@us-west-2.amazonses.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> |
|
|
Sibi Sankar
|
18ec173d56 |
dt-bindings: power: Add rpmh power-domain bindings for SM8150
Add RPMH power-domain bindings for the SM8150 family of SoCs. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/0101016e7f99ad2b-2bce2fac-2f02-4b3f-ac64-09942f7251ea-000000@us-west-2.amazonses.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> |
|
|
Martin Blumenstingl
|
51b6fe7e66 |
dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding
Amlogic Meson8, Meson8b and Meson8m2 SoCs have a DDR clock controller in the MMCBUS registers. There is no public documentation on this, but the GPL u-boot sources from the Amlogic BSP show that: - it uses the same XTAL input as the main clock controller - it contains a PLL which seems to be implemented just like the other PLLs in this SoC - there is a power-of-two PLL post-divider Add the documentation and header file for this DDR clock controller. Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> |
|
|
Martin Blumenstingl
|
4881873f4c |
dt-bindings: reset: meson8b: fix duplicate reset IDs
According to the public S805 datasheet the RESET2 register uses the
following bits for the PIC_DC, PSC and NAND reset lines:
- PIC_DC is at bit 3 (meaning: RESET_VD_RMEM + 3)
- PSC is at bit 4 (meaning: RESET_VD_RMEM + 4)
- NAND is at bit 5 (meaning: RESET_VD_RMEM + 4)
Update the reset IDs of these three reset lines so they don't conflict
with PIC_DC and map to the actual hardware reset lines.
Fixes:
|
|
|
Linus Torvalds
|
eb275167d1 |
ARM: Device-tree updates
As always, the bulk of updates. Some of the news this cycle:
New SoC descriptions:
- Broadcom BCM2711
- Amlogic Meson A1 and G12
- Freescale S32V234
- Marvell Armada AP807/AP807-quad and CP115
- Realtek RTD1293 and RTD1296
- Rockchip RK3308
New boards and platforms:
- Allwinner: NanoPi Duo2
- Amlogic: Ugoos am6
- Atmel at91: Overkiz Kizbox2/4
- Broadcom: RPi4, Luxul XWC-2000
- Marvell: New Espressobin flavor
- NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix
E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and
OPOS6ULDev
- Renesas: Salvator-XS
- Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl3pQ9MPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3QEMP/3x70z+w+XIAtNSLyxZ2KYiiZA+QYjvIA0IO
6qdeTevmqT225bA8jeb9MyhfuPMqYADkMsa4yBKU3LyHs67cgc35JvTZT1lKcueC
bra5pj2kNulsLDGcinh6iSqD9DMk1NMmL2bBKbezOhOjJZMSDiljZBkl1Z6Yvope
Nfqy5kxq1Z6MktMzVj+ZP3sFYw2YXbF5TKpwGZVl4lbM8tfbGGCqTE7p0ycZO1JL
TsDw9ChCfswqLDCTJUqc6CRIIXmOwR89QxIiVZ6FabS+DbNfuTOH6UKoYfNEoOMM
SDy3x57Gh/TC/LdoQlagtxNLnzCoEOIKtro2D6Q8u9P1JbXvHgglhINnwJbMvBbe
xWouaDFNf+yL0rwHKdKzwRgALmabP7OB8pfHQ6HEyW5OkXT0DIL6HldXJ5R4rfPv
1mjUczwYELGIJKnI6Xg37pC/9mYbJxXkPNZKvJXMuF7dDBdmrUXzMJusp6QldBLb
fkLweh+qGuKnL9PehaIW+iS3zD8khUFtPHd8z/kCXD1TsTVkZTKO0TO71HL7pC/i
VJNYN7uQbaycnpNjmO7V9v2mR7eOMvm49A4TJ6mE6wDM4LUFKXrIWMs9mOqFszSj
R98nwE8WeSm35iEKtEO4vnPWJhIP3WbInQV3uglHkC3LxCWpNNuUHE4rkq1SSNDI
NX3wZRr0
=Fn8L
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Device-tree updates from Olof Johansson:
"As always, the bulk of updates. Some of the news this cycle:
New SoC descriptions:
- Broadcom BCM2711
- Amlogic Meson A1 and G12
- Freescale S32V234
- Marvell Armada AP807/AP807-quad and CP115
- Realtek RTD1293 and RTD1296
- Rockchip RK3308
New boards and platforms:
- Allwinner: NanoPi Duo2
- Amlogic: Ugoos am6
- Atmel at91: Overkiz Kizbox2/4
- Broadcom: RPi4, Luxul XWC-2000
- Marvell: New Espressobin flavor
- NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix
E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and
OPOS6ULDev
- Renesas: Salvator-XS
- Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits)
ARM: dts: logicpd-torpedo: Disable USB Host
arm: dts: mt6323: add keys, power-controller, rtc and codec
arm64: dts: mt8183: add systimer0 device node
dt-bindings: mediatek: update bindings for MT8183 systimer
arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc
arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.
arm64: dts: rockchip: Add Beelink A1
dt-bindings: ARM: rockchip: Add Beelink A1
arm64: dts: rockchip: Add RK3328 audio pipelines
arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports
arm64: dts: ti: k3-j721e-main: add USB controller nodes
ARM: dts: aspeed-g6: Add timer description
ARM: dts: aspeed: ast2600evb: Enable i2c buses
ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards
dt-bindings: arm: at91: Document Kizbox2-2 board binding
arm64: dts: meson-gx: fix i2c compatible
arm64: dts: meson-gx: cec node should be disabled by default
arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible
arm64: dts: meson-gxm: fix gpu irq order
arm64: dts: meson-g12a: fix gpu irq order
...
|
|
|
Linus Torvalds
|
ec939e4c94 |
ARM: SoC-related driver updates
Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo
-----BEGIN PGP SIGNATURE-----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=dk7w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
|
|
|
Linus Torvalds
|
a5255bc316 |
dmaengine updates for v5.5-rc1
- New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC,
Freescale dpaa2 qDMA
- Support for X1000 in JZ4780
- Xilinx dma updates and support for Xilinx AXI MCDM controller
- New bindings for rcar R8A774B1
- Minor updates to dw, dma-jz4780, ti-edma, sprd drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl3gqOEACgkQfBQHDyUj
g0fD5A//cXMPYTZvVtuEIEMfaN6wGexJVQFuRpvHfFyGw8dHijKB/zySne8xPM8E
WuWwI9cpn29AgEa5ZR8wUHgNupA1w9owuuGWAtdVf9qKqg2iqyQDfm3768LQ9DAa
V+Fi68g0uou/NIS58cGAqqDvBFc6Gd7VCjkxvcUSq7r0diWAN2CH16332Oyzqb99
PPvvGwnsryTcrOyPilKhyLPaCCNfFqBke4FLFLK6hAv3fZAs2uOTDESjgwTaLxon
dkZY5L7HqOa1jMkuCxLUt9YH5QvTmjspRHY8ck9zgeNDql6y+qPkS9ifj48+mMIu
jy1KroOcLwMXE/eFrBH4NHFA6wTXyGhJY7i7zVLLjHTgivQ6IVF/6FG9jCvSLgRf
UgGgRQ6qKlKPkNHLT0GwkAR/oVEBb7Z2ff0AXQXq2cudF85Uuccahj/uocjZrEg5
v/yZ6X/jZy5MeDsG41Af2sSS8rLP/F2GAr9voo6/yhklzaRPRR4AL8e33PYeCW94
pU2DlXtkdotFpv9fLlxpKotGYAZ3VWX8darKOF0uRmJX8QSxjLRS4Br558NIhX+I
4kizRHqJrihwjb/fLdVNKi+X+VdwVNjzWNmuADdksT00QUOdbked5a3vHBqX3gkR
ztRiv0Qw8oOVJSCItLMLto3ckVUGav7HmeX4/pea2h9sxhkn/nk=
=bDMV
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Here are the changes this time around, couple of new drivers and
updates to few more:
- New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC,
Freescale dpaa2 qDMA
- Support for X1000 in JZ4780
- Xilinx dma updates and support for Xilinx AXI MCDM controller
- New bindings for rcar R8A774B1
- Minor updates to dw, dma-jz4780, ti-edma, sprd drivers"
* tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (61 commits)
dmaengine: Fix Kconfig indentation
dmaengine: sf-pdma: move macro to header file
dmaengine: sf-pdma: replace /** with /* for non-function comment
dmaengine: ti: edma: fix missed failure handling
dmaengine: mmp_pdma: add missed of_dma_controller_free
dmaengine: mmp_tdma: add missed of_dma_controller_free
dmaengine: sprd: Add wrap address support for link-list mode
MAINTAINERS: Add Green as SiFive PDMA driver maintainer
dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00
dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA
dmaengine: zx: remove: removed dmam_pool_destroy
dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails
dmaengine: iop-adma: clean up an indentation issue
dmaengine: milbeaut-xdmac: remove redundant error log
dmaengine: milbeaut-hdmac: remove redundant error log
dmaengine: dma-jz4780: add missed clk_disable_unprepare in remove
dmaengine: JZ4780: Add support for the X1000.
dt-bindings: dmaengine: Add X1000 bindings.
dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support
dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle
...
|
|
|
Linus Torvalds
|
ddebe839c6 |
This merge window we have one small clk provider API in the core framework and
then a bunch of driver updates and a handful of new drivers. In terms of
diffstat the Qualcomm and Amlogic drivers are high up there because of all the
clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work
done this cycle too to support suspend/resume and memory controllers. And the
OMAP clk driver got proper clk and reset handling in place.
Rounding out the patches are various updates to remove unused data, mark things
static, correct incorrect data in drivers, etc. All the little things that
improve drivers and maintain code health. I will point out that there's a patch
in here for the GPIO clk driver, that almost nobody uses, which changes
behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent.
Other than that things are fairly well SoC specific here.
Core:
- Add a clk provider API to get current parent index
- Plug a memory leak in clk_unregister() path
New Drivers:
- CGU in Ingenix X1000
- Bitmain BM1880 clks
- Qualcomm MSM8998 GPU clk controllers
- Qualcomm SC7180 GCC and RPMH clk controllers
- Qualcomm QCS404 Q6SSTOP clk controllers
- Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
- Add support for the Renesas RZ/G2N (r8a774b1) SoC
- Add Tegra20/30 External Memory Clock (EMC) support
Updates:
- Make gpio gate clks propagate rate setting up to parent
- Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority
- Drop unused variables, enums, etc. in various clk drivers
- Convert various drivers to use devm_platform_ioremap_resource()
- Use struct_size() some more in various clk drivers
- Improve Rockchip px30 clk tree
- Add suspend/resume support to Tegra210 clk driver
- Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
- Allwinner DT exports and H6 clk tree fixes
- Proper clk and reset handling for OMAP SoCs
- Revamped TI divider clk to clamp max divider
- Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs
- Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
- Add VIDEO2_PLL clock for imx8mq
- Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
- Add sm1 support in the Amlogic audio clock controller
- Switch some clocks on R-Car Gen2/3 to .determine_rate()
- Remove Renesas R-Car Gen2 legacy DT clock support
- Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
- Improve Renesas R-Car Gen3 SD clock handling
- Add rate table for Samsung exynos542x GPU and VPLL clks
- Fix potential CPU performance degradation after system suspend/resume cycle
on exynos542x SoCs
-----BEGIN PGP SIGNATURE-----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=qJNg
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This merge window we have one small clk provider API in the core
framework and then a bunch of driver updates and a handful of new
drivers. In terms of diffstat the Qualcomm and Amlogic drivers are
high up there because of all the clk data introcued by new drivers.
The Nvidia Tegra driver had a lot of work done this cycle too to
support suspend/resume and memory controllers. And the OMAP clk driver
got proper clk and reset handling in place.
Rounding out the patches are various updates to remove unused data,
mark things static, correct incorrect data in drivers, etc. All the
little things that improve drivers and maintain code health. I will
point out that there's a patch in here for the GPIO clk driver, that
almost nobody uses, which changes behavior and causes clk_set_rate()
to try to change the GPIO gate clk's parent. Other than that things
are fairly well SoC specific here.
Core:
- Add a clk provider API to get current parent index
- Plug a memory leak in clk_unregister() path
New Drivers:
- CGU in Ingenix X1000
- Bitmain BM1880 clks
- Qualcomm MSM8998 GPU clk controllers
- Qualcomm SC7180 GCC and RPMH clk controllers
- Qualcomm QCS404 Q6SSTOP clk controllers
- Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
- Add support for the Renesas RZ/G2N (r8a774b1) SoC
- Add Tegra20/30 External Memory Clock (EMC) support
Updates:
- Make gpio gate clks propagate rate setting up to parent
- Prepare Armada 3700 for suspend to RAM by moving PCIe
suspend/resume priority
- Drop unused variables, enums, etc. in various clk drivers
- Convert various drivers to use devm_platform_ioremap_resource()
- Use struct_size() some more in various clk drivers
- Improve Rockchip px30 clk tree
- Add suspend/resume support to Tegra210 clk driver
- Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
- Allwinner DT exports and H6 clk tree fixes
- Proper clk and reset handling for OMAP SoCs
- Revamped TI divider clk to clamp max divider
- Make 1443X/1416X PLL clock structure common for reusing among i.MX8
SoCs
- Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
- Add VIDEO2_PLL clock for imx8mq
- Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
- Add sm1 support in the Amlogic audio clock controller
- Switch some clocks on R-Car Gen2/3 to .determine_rate()
- Remove Renesas R-Car Gen2 legacy DT clock support
- Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
- Improve Renesas R-Car Gen3 SD clock handling
- Add rate table for Samsung exynos542x GPU and VPLL clks
- Fix potential CPU performance degradation after system
suspend/resume cycle on exynos542x SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits)
clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
MAINTAINERS: Add entry for BM1880 SoC clock driver
clk: Add common clock driver for BM1880 SoC
dt-bindings: clock: Add devicetree binding for BM1880 SoC
clk: Add clk_hw_unregister_composite helper function definition
clk: Zero init clk_init_data in helpers
clk: ingenic: Allow drivers to be built with COMPILE_TEST
MAINTAINERS: Update section for Ux500 clock drivers
clk: mark clk_disable_unused() as __init
clk: Fix memory leak in clk_unregister()
clk: Ingenic: Add CGU driver for X1000.
dt-bindings: clock: Add X1000 bindings.
clk: tegra: Use match_string() helper to simplify the code
clk: pxa: fix one of the pxa RTC clocks
clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()
clk: armada-xp: remove unused code
clk: tegra: Fix build error without CONFIG_PM_SLEEP
clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
clk: tegra: Optimize PLLX restore on Tegra20/30
clk: tegra: Add suspend and resume support on Tegra210
...
|
|
|
Linus Torvalds
|
0dd09bc02c |
Staging / IIO patches for 5.5-rc1
Here is the big staging and iio set of patches for the 5.5-rc1 release. It's the usual huge collection of cleanup patches all over the drivers/staging/ area, along with a new staging driver, and a bunch of new IIO drivers as well. Full details are in the shortlog, but all of these have been in linux-next for a long time with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6lVQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylFnwCgyvZ62uUyQTRey0zvNTe3I4fY9L4AnAnrz3ZC U6ZA2+Uj3O6qhAr5frRu =uv8S -----END PGP SIGNATURE----- Merge tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / iio updates from Greg KH: "Here is the big staging and iio set of patches for the 5.5-rc1 release. It's the usual huge collection of cleanup patches all over the drivers/staging/ area, along with a new staging driver, and a bunch of new IIO drivers as well. Full details are in the shortlog, but all of these have been in linux-next for a long time with no reported issues" * tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits) staging: vchiq: Have vchiq_dump_* functions return an error code staging: vchiq: Refactor indentation in vchiq_dump_* functions staging: fwserial: Fix Kconfig indentation (seven spaces) staging: vchiq_dump: Replace min with min_t staging: vchiq: Fix block comment format in vchiq_dump() staging: octeon: indent with tabs instead of spaces staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error staging: most: core: remove sysfs attr remove_link staging: vc04: Fix Kconfig indentation staging: pi433: Fix Kconfig indentation staging: nvec: Fix Kconfig indentation staging: most: Fix Kconfig indentation staging: fwserial: Fix Kconfig indentation staging: fbtft: Fix Kconfig indentation fbtft: Drop OF dependency fbtft: Make use of device property API fbtft: Drop useless #ifdef CONFIG_OF and dead code fbtft: Describe function parameters in kernel-doc fbtft: Make sure string is NULL terminated staging: rtl8723bs: remove set but not used variable 'change', 'pos' ... |
|
|
Linus Torvalds
|
8f56e4ebe0 |
Char/Misc driver patches for 5.5-rc1
Here is the big set of char/misc and other driver patches for 5.5-rc1 Loads of different things in here, this feels like the catch-all of driver subsystems these days. Full details are in the shortlog, but nothing major overall, just lots of driver updates and additions. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6ewA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymNXACfebVkDrFOH9EqDgFArPvZ1i9EmZ4AoLbE1Wki ftJApk+Ov1BT2TvClOza =cXqg -----END PGP SIGNATURE----- Merge tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other driver patches for 5.5-rc1 Loads of different things in here, this feels like the catch-all of driver subsystems these days. Full details are in the shortlog, but nothing major overall, just lots of driver updates and additions. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (198 commits) char: Fix Kconfig indentation, continued habanalabs: add more protection of device during reset habanalabs: flush EQ workers in hard reset habanalabs: make the reset code more consistent habanalabs: expose reset counters via existing INFO IOCTL habanalabs: make code more concise habanalabs: use defines for F/W files habanalabs: remove prints on successful device initialization habanalabs: remove unnecessary checks habanalabs: invalidate MMU cache only once habanalabs: skip VA block list update in reset flow habanalabs: optimize MMU unmap habanalabs: prevent read/write from/to the device during hard reset habanalabs: split MMU properties to PCI/DRAM habanalabs: re-factor MMU masks and documentation habanalabs: type specific MMU cache invalidation habanalabs: re-factor memory module code habanalabs: export uapi defines to user-space habanalabs: don't print error when queues are full habanalabs: increase max jobs number to 512 ... |
|
|
Linus Torvalds
|
dc5fa46568 |
This is the bulk of pin control changes for the v5.5 kernel
series:
Core changes:
- Avoid taking direct references to device tree-supplied
device names: these may changed at runtime under certain
circumstances to kstrdup them.
GPIO related:
- Work is ongoing to move to passing the irqchip along as a
templated struct gpio_irq_chip when adding a standard
gpiolib-based irqchip to a GPIO controller, a few patches
in this cycle switches a few pin control drivers over to
using this method.
New hardware support:
- Intel Lightning Mountain SoC pin controller and GPIO
support, a first Intel platform to use device tree rather
than ACPI to configure the system. News reports says that
this SoC is a network processor.
- Qualcomm MSM8976 and MSM8956
- Qualcomm PMIC GPIO now also supports PM6150 and PM6150L
- Qualcomm SPMI MPP and SPMI GPIO for PM8950 and PMI8950
- Rockchip RK3308
- Renesas R8A77961
- Allwinner Meson-A1
Driver improvements:
- get_multiple and set_multiple support for the AT91-PIO4 driver.
- Convert Qualcomm SSBI GPIO to use the hierarchical IRQ helpers
in the GPIOlib irqchip.
-----BEGIN PGP SIGNATURE-----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=uPLY
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for v5.5.
It is pretty much business as usual, the most interesting thing I
think is the pin controller for a new Intel chip called Lightning
Mountain, which is according to news reports some kind of embedded
network processor and what is surprising about it is that Intel have
decided to use device tree to describe the system rather than ACPI
that they have traditionally favored.
Core changes:
- Avoid taking direct references to device tree-supplied device
names: these may changed at runtime under certain circumstances to
kstrdup them.
GPIO related:
- Work is ongoing to move to passing the irqchip along as a templated
struct gpio_irq_chip when adding a standard gpiolib-based irqchip
to a GPIO controller, a few patches in this cycle switches a few
pin control drivers over to using this method.
New hardware support:
- Intel Lightning Mountain SoC pin controller and GPIO support, a
first Intel platform to use device tree rather than ACPI to
configure the system. News reports says that this SoC is a network
processor.
- Qualcomm MSM8976 and MSM8956
- Qualcomm PMIC GPIO now also supports PM6150 and PM6150L
- Qualcomm SPMI MPP and SPMI GPIO for PM8950 and PMI8950
- Rockchip RK3308
- Renesas R8A77961
- Allwinner Meson-A1
Driver improvements:
- get_multiple and set_multiple support for the AT91-PIO4 driver.
- Convert Qualcomm SSBI GPIO to use the hierarchical IRQ helpers in
the GPIOlib irqchip"
* tag 'pinctrl-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
pinctrl: ingenic: Add OTG VBUS pin for the JZ4770
pinctrl: ingenic: Handle PIN_CONFIG_OUTPUT config
pinctrl: Fix Kconfig indentation
pinctrl: lewisburg: Update pin list according to v1.1v6
MAINTAINERS: Replace my email by one @kernel.org
pinctrl: armada-37xx: Fix irq mask access in armada_37xx_irq_set_type()
dt-bindings: pinctrl: intel: Add for new SoC
pinctrl: Add pinmux & GPIO controller driver for a new SoC
pinctrl: rza1: remove unnecessary static inline function
pinctrl: meson: add pinctrl driver support for Meson-A1 SoC
pinctrl: meson: add a new callback for SoCs fixup
pinctrl: nomadik: db8500: Add mc0_a_2 pin group without direction control
dt-bindings: pinctrl: Convert generic pin mux and config properties to schema
pinctrl: cherryview: Missed type change to unsigned int
pinctrl: intel: Missed type change to unsigned int
pinctrl: use devm_platform_ioremap_resource() to simplify code
pinctrl: just return if no valid maps
dt-bindings: pinctrl: qcom-pmic-mpp: Add support for PM/PMI8950
pinctrl: qcom: spmi-mpp: Add PM/PMI8950 compatible strings
dt-bindings: pinctrl: qcom-pmic-gpio: Add support for PM/PMI8950
...
|
|
|
Stephen Boyd
|
ec16ffe36d |
Merge branches 'clk-ingenic', 'clk-init-leak', 'clk-ux500' and 'clk-bitmain' into clk-next
- Support CGU in Ingenix X1000 - Support Bitmain BM1880 clks * clk-ingenic: clk: ingenic: Allow drivers to be built with COMPILE_TEST clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. * clk-init-leak: clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() * clk-ux500: MAINTAINERS: Update section for Ux500 clock drivers * clk-bitmain: MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers |
|
|
Stephen Boyd
|
dabedfede3 |
Merge branches 'clk-gpio-flags', 'clk-tegra', 'clk-rockchip', 'clk-sprd' and 'clk-pxa' into clk-next
- Make gpio gate clks propagate rate setting up to parent * clk-gpio-flags: clk: clk-gpio: propagate rate change to parent * clk-tegra: (23 commits) clk: tegra: Use match_string() helper to simplify the code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 clk: tegra: Share clk and rst register defines with Tegra clock driver clk: tegra: Use fence_udelay() during PLLU init clk: tegra: clk-dfll: Add suspend and resume support clk: tegra: clk-super: Add restore-context support clk: tegra: clk-super: Fix to enable PLLP branches to CPU clk: tegra: periph: Add restore_context support clk: tegra: Support for OSC context save and restore clk: tegra: pll: Save and restore pll context clk: tegra: pllout: Save and restore pllout context clk: tegra: divider: Save and restore divider rate clk: tegra: Reimplement SOR clocks on Tegra210 clk: tegra: Reimplement SOR clock on Tegra124 clk: tegra: Rename sor0_lvds to sor0_out clk: tegra: Move SOR0 implementation to Tegra124 clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC ... * clk-rockchip: clk: rockchip: protect the pclk_usb_grf as critical on px30 clk: rockchip: add video-related niu clocks as critical on px30 clk: rockchip: move px30 critical clocks to correct clock controller clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc clk: rockchip: make clk_half_divider_ops static * clk-sprd: clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() * clk-pxa: clk: pxa: fix one of the pxa RTC clocks |
|
|
Stephen Boyd
|
6df24d0c2f |
Merge branches 'clk-ti', 'clk-allwinner', 'clk-qcom', 'clk-sa' and 'clk-aspeed' into clk-next
- Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Use struct_size() some more in various clk drivers * clk-ti: clk/ti/adpll: allocate room for terminating null ARM: dts: omap3: fix DPLL4 M4 divider max value clk: ti: divider: convert to use min,max,mask instead of width clk: ti: divider: cleanup ti_clk_parse_divider_data API clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table clk: ti: am43xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from pruss clkctrl clock clk: ti: am43xx: drop idlest polling from pruss clkctrl clock clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap5: add IVA subsystem clkctrl data dt-bindings: clk: add omap5 iva clkctrl definitions clk: ti: clkctrl: add new exported API for checking standby info clk: ti: clkctrl: convert to use bit helper macros instead of bitops clk: ti: clkctrl: fix setting up clkctrl clocks * clk-allwinner: clk: sunxi-ng: h3: Export MBUS clock clk: sunxi-ng: h6: Allow GPU to change parent rate clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL * clk-qcom: clk: qcom: rpmh: Reuse sdm845 clks for sm8150 clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver clk: qcom: Allow constant ratio freq tables for rcg clk: qcom: smd: Add missing pnoc clock clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180 dt-bindings: clock: Introduce RPMHCC bindings for SC7180 dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SC7180 dt-bindings: clock: Add sc7180 GCC clock binding dt-bindings: clock: Add YAML schemas for the QCOM GCC clock bindings clk: qcom: common: Return NULL from clk_hw OF provider clk: qcom: rcg: update the DFS macro for RCG clk: qcom: remove unneeded semicolon clk: qcom: Add Q6SSTOP clock controller for QCS404 dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings * clk-sa: drivers/clk: convert VL struct to struct_size * clk-aspeed: clk: aspeed: Add RMII RCLK gates for both AST2500 MACs clk: ast2600: Add RMII RCLK gates for all four MACs dt-bindings: clock: Add AST2600 RMII RCLK gate definitions dt-bindings: clock: Add AST2500 RMII RCLK definitions |
|
|
Stephen Boyd
|
74ca928886 |
Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and 'clk-imx' into clk-next
* clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter |
|
|
Linus Torvalds
|
3f1b210a7f |
sound updates for 5.5-rc1
There have been some significant changes in the core side, both for
ALSA and ASoC, while lots of development have been seen in SOF, as
well as many small fixes/improvements for ASoC codecs and platforms.
Below is a highlight in this cycle:
Core:
- The unification of PCM vmalloc buffer allocation helpers into the
standard API
- Clean up of the default PCM mmap handling for vmalloc & SG-buffer
- Fix potential races at ALSA timer open
- A few new PCM API extensions; just preliminary core changes, the
actual changes in drivers will be merged in 5.6
- Continued ASoC componentization works; now almost everything is a
common ASoC component object. A lot of refactoring and
simplification have been done along with it.
ASoC:
- Many fixes to the Sound Open Firmware (SOF) code
- Wake on voice support for Chromebooks
- SPI support and trigger word detection for RT5677
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770
HD-audio:
- Improved Intel DSP configuration / probe code for SOF
- Plumbing the legacy HD-audio driver with Intel SOF HDMI
- DP-MST support for Nvidia HDMI codecs
- Realtek quirks cleanups and new additions as usual
Others:
- Lots of refactoring and cleanups for FireWire; period-size sharing,
h/w IRQ interval configuration, clock recovery improvements, etc
- USB-audio: Scarlett mixer quirks
- Cleanups of PCM calls in various drivers (including media and USB)
to adapt the core API changes
-----BEGIN PGP SIGNATURE-----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=xGUt
-----END PGP SIGNATURE-----
Merge tag 'sound-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been some significant changes in the core side, both for
ALSA and ASoC, while lots of development have been seen in SOF, as
well as many small fixes/improvements for ASoC codecs and platforms.
Below is a highlight in this cycle:
Core:
- The unification of PCM vmalloc buffer allocation helpers into the
standard API
- Clean up of the default PCM mmap handling for vmalloc & SG-buffer
- Fix potential races at ALSA timer open
- A few new PCM API extensions; just preliminary core changes, the
actual changes in drivers will be merged in 5.6
- Continued ASoC componentization works; now almost everything is a
common ASoC component object. A lot of refactoring and
simplification have been done along with it.
ASoC:
- Many fixes to the Sound Open Firmware (SOF) code
- Wake on voice support for Chromebooks
- SPI support and trigger word detection for RT5677
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770
HD-audio:
- Improved Intel DSP configuration / probe code for SOF
- Plumbing the legacy HD-audio driver with Intel SOF HDMI
- DP-MST support for Nvidia HDMI codecs
- Realtek quirks cleanups and new additions as usual
Others:
- Lots of refactoring and cleanups for FireWire; period-size sharing,
h/w IRQ interval configuration, clock recovery improvements, etc
- USB-audio: Scarlett mixer quirks
- Cleanups of PCM calls in various drivers (including media and USB)
to adapt the core API changes"
* tag 'sound-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits)
ALSA: usb-audio: Fix Focusrite Scarlett 6i6 gen1 - input handling
ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC
ALSA: aloop: Fix dependency on timer API
ASoC: DMI long name - avoid to add board name if matches with product name
ASoC: improve the DMI long card code in asoc-core
ASoC: rsnd: fix DALIGN register for SSIU
ALSA: aloop: Avoid unexpected timer event callback tasklets
ALSA: aloop: Remove redundant locking in timer open function
ASoC: component: Add sync_stop PCM ops
ASoC: pcm: Make ioctl ops optional
ALSA: hda/hdmi - Clear codec->relaxed_resume flag at unbinding
ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs
ALSA: cs4236: fix error return comparison of an unsigned integer
ALSA: usb-audio: Fix NULL dereference at parsing BADD
ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
ALSA: hda/realtek - Move some alc236 pintbls to fallback table
ALSA: hda/realtek - Move some alc256 pintbls to fallback table
ALSA: docs: Update about the new PCM sync_stop ops
ALSA: pcm: Add card sync_irq field
...
|
|
|
Linus Torvalds
|
9e7a03233e |
Power management updates for 5.5-rc1
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki).
- Fix and clean up the teo cpuidle governor (Rafael Wysocki).
- Fix the cpuidle registration error code path (Zhenzhong Duan).
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei).
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano).
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar).
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen).
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef).
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard).
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller).
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla).
* Fix for imx's default speed grade value (Anson Huang).
* Minor cleanup of the s3c64xx driver (Nathan Chancellor).
* CPU speed bin detection fix for sun50i (Ondrej Jirman).
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez).
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko).
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke).
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko).
* Removal of unused property from dt-binding documentation for
the exynos-bus driver (Kamil Konieczny).
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski).
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui).
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson).
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd).
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft).
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan).
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven).
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas).
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt).
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel).
* Fix build warnings (Nathan Chancellor).
* Improve mperf_monitor handling (Janakarajan Natarajan).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl3dHGYSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxMcgP/1bMSkxlRHFOXYSRwS4YcvkUjlBHrCSi
3qGRyYwhc+eRLqRc+2tcmQeQEeQRBqUt8etp7/9WxqS3nic/3Vdf6AFuhSpmJzo1
6JTEutHMU5eP8lwQuKoUCJncCNdIfEOkd5T35E12W/ar5PwyJio0UByZJBnJBjD/
p7/713ucq6ZH95OGncmCJ1S1UslFCZrSS2RRigDInu8gpEssnwN9zwaJbzUYrZHj
BmnKpBpT8FdLmkpbOtmmiT7q2ZGpUEHhkaO916Knf/+BFdvydTXoR90FVvXKy8Zr
QpOxaTdQB2ADifUa5zs8klVP6otmZhEO9vz8hVMUWGziqagObykQngzl8tqrKEBh
hLI8eEG1IkEBCv5ThQbLcoaRXNpwriXXfvWPTPB8s84HJxNZ09F6pXsv1SLh96qC
lj8Q5Yy2a3tlpsg4LB58XoJ54gOtlh8bWKkM0FytrFI/IP+HT4TUu/Rxgp1nDbGd
tKzLvpn4Yo2h10seeDbYk3l79mogUYj50RmwjjPn+9RwS/Df4eIpNb6ibllGZUN/
zcPZH5xlVfQRl2LKDufVN0nYSnoMZY/fU05p9XbUiJWd80LHYOb4Em1N6h/FNOyl
alDhVwlxEvc2BQwL/gjYmN6Qxc7SsPTBrSGVwjWYY+FghOYQd/wBDQqQUeM21QKg
ChOE3z/F/26r
=GJvT
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include cpuidle changes to use nanoseconds (instead of
microseconds) as the unit of time and to simplify checks for disabled
idle states in the idle loop, some cpuidle fixes and governor updates,
assorted cpufreq updates (driver updates mostly and a few core fixes
and cleanups), devfreq updates (dominated by the tegra30 driver
changes), new CPU IDs for the RAPL power capping driver, relatively
minor updates of the generic power domains (genpd) and operation
performance points (OPP) frameworks, and assorted fixes and cleanups.
There are also two maintainer information updates: Chanwoo Choi will
be maintaining the devfreq subsystem going forward and Todd Brandt is
going to maintain the pm-graph utility (created by him).
Specifics:
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki)
- Fix and clean up the teo cpuidle governor (Rafael Wysocki)
- Fix the cpuidle registration error code path (Zhenzhong Duan)
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei)
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano)
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar)
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen)
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef)
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard)
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller)
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla)
* Fix for imx's default speed grade value (Anson Huang)
* Minor cleanup of the s3c64xx driver (Nathan Chancellor)
* CPU speed bin detection fix for sun50i (Ondrej Jirman)
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez)
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko)
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke)
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko)
* Removal of unused property from dt-binding documentation for the
exynos-bus driver (Kamil Konieczny)
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski)
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui)
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson)
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd)
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft)
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan)
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven)
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas)
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt)
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel)
* Fix build warnings (Nathan Chancellor)
* Improve mperf_monitor handling (Janakarajan Natarajan)"
* tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
PM: Wrap documentation to fit in 80 columns
cpuidle: Pass exit latency limit to cpuidle_use_deepest_state()
cpuidle: Allow idle injection to apply exit latency limit
cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks
cpuidle: teo: Avoid code duplication in conditionals
cpufreq: Register drivers only after CPU devices have been registered
cpuidle: teo: Avoid using "early hits" incorrectly
cpuidle: teo: Exclude cpuidle overhead from computations
PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
PM / Domains: Implement the ->start() callback for genpd
PM / Domains: Introduce dev_pm_domain_start()
ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition
PM / wakeirq: remove unnecessary parentheses
power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call
cpuidle: Use nanoseconds as the unit of time
PM / OPP: Support adjusting OPP voltages at runtime
PM / core: Clean up some function headers in power.h
cpufreq: Add NULL checks to show() and store() methods of cpufreq
cpufreq: intel_pstate: Fix plain int as pointer warning from sparse
...
|
|
|
Linus Torvalds
|
d873a0cd21 |
regulator: Updates for v5.5
Another fairly quiet release for the regulator API, some work all around
including some core work but mostly in specialist or driver specific
code:
- Fix for powering off boot-on regulators.
- Enhancements to the coupled regulator support introduced in the last
release.
- Conversion of a bunch of drivers to the fwnode API for GPIOs.
- Mode support for DA9062.
- New device support for Qualcomm PM1650, PM8004 and PM895 and Silergy
SR83X.
- Removal of obsolete AB8505 support.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3b04ETHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0B82B/9Eto3rSo03EqkkKG3clSKPDGO9WSZG
LSLQ0lbHxsXL8cyIoOx8S/ygiyLn07SLFbLFVhkMi/JXNlPxlNMKMohY3yNffKMd
7DQgWiqeFDEyxU9bFoTR1mAWMfycNUCGFDWel2EjmnhJ0NA5hyjXzXwgoYIUWMPf
GQBMp6Qbxtl9SShNeuMNlzFdHdThAr8JNm014UVQLeg0Kx1DowMDWgCYVuHmRqDB
6VF37pNxaqPcGB/nqxJfSJULrj6brLJuQ9KFNGROxP9VPK8lt0+Aaeg3HsLq/LLe
z6q0bAJ9EVJYhAuJYrSpUgDdd5pxcshLj3rzl70kH0Ac+GWjQsqfoqTO
=jJ5N
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Another fairly quiet release for the regulator API, some work all
around including some core work but mostly in specialist or driver
specific code:
- Fix for powering off boot-on regulators
- Enhancements to the coupled regulator support introduced in the
last release
- Conversion of a bunch of drivers to the fwnode API for GPIOs
- Mode support for DA9062
- New device support for Qualcomm PM1650, PM8004 and PM895 and
Silergy SR83X
- Removal of obsolete AB8505 support"
* tag 'regulator-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits)
regulator: da9062: Return REGULATOR_MODE_INVALID for invalid mode
regulator: Fix Kconfig indentation
regulator: tps6105x: add optional devicetree support
tps6105x: add optional devicetree support
regulator: rn5t618: fix rc5t619 ldo10 enable
regulator: vexpress: Use PTR_ERR_OR_ZERO() to simplify code
dt-bindings: mfd: da9062: describe buck modes
regulator: da9062: add of_map_mode support for bucks
regulator: da9062: refactor buck modes into header
regulator: stpmic1: Set a default ramp delay value
regulator: core: Let boot-on regulators be powered off
regulator: core: Don't try to remove device links if add failed
regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id
regulator: ab8500: Remove AB8505 USB regulator
regulator: fan53555: add chip id for Silergy SYR83X
regulator: fixed: add off-on-delay
dt-bindings: regulator: fixed: add off-on-delay-us property
regulator: core: Allow generic coupling only for always-on regulators
regulator: core: Release coupled_rdevs on regulator_init_coupling() error
regulator: bd70528: Add MODULE_ALIAS to allow module auto loading
...
|
|
|
Manivannan Sadhasivam
|
7046c6b018 |
dt-bindings: clock: Add devicetree binding for BM1880 SoC
Add YAML devicetree binding for Bitmain BM1880 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20191115162901.17456-4-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Christoph Fritz
|
7d34aec52d
|
regulator: da9062: refactor buck modes into header
This patch refactors buck modes into a header file so that device trees can make use of these mode constants. The new header filename uses da9063 because DA9063 was the earlier chip and its driver code will want updating at some point in a similar manner. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/1573652416-9848-2-git-send-email-chf.fritz@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Dan Murphy
|
4d66c56f7e |
dt-bindings: net: dp83869: Add TI dp83869 phy
Add dt bindings for the TI dp83869 Gigabit ethernet phy device. Signed-off-by: Dan Murphy <dmurphy@ti.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Zhou Yanjie
|
0b24748c3b |
dt-bindings: clock: Add X1000 bindings.
Add the clock bindings for the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Link: https://lkml.kernel.org/r/1573378102-72380-2-git-send-email-zhouyanjie@zoho.com Reviewed-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Thierry Reding
|
05308d7e7b |
clk: tegra: Reimplement SOR clocks on Tegra210
In order to allow the display driver to deal uniformly with all SOR generations, implement the SOR clocks in a way that is compatible with Tegra186 and later. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
Thierry Reding
|
991a051ea5 |
clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC
Later SoC generations implement this clock as SOR1_OUT. For consistency,
the Tegra210 implementation was adapted to match the same name in commit
|
|
|
Olof Johansson
|
5588aa81d2 |
arm64: dts: Amlogic updates for v5.5
Hightlights - new board; ugoos am6, based on G12B SoC - g12: add thermal driver and cooling properties - sm1: enable audio on SEI610 board - IR: add several keymaps - sdio: add keep-power-in-suspend property for multiple boards - pcie: add support for G12A - multiple fixes, cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl3FFnEACgkQWTcYmtP7 xmWyeg//QE6hBYYjZfwiIbLCgRlpdv04HZg6e5bPqZ8A9x9/mdQoH6cqwbKVpKij bLrkHuwD+WtkWStbemdPtmPliEncAyX9jXGcvIor3eYa9IV6kTORZ8YWq6c8RDMM y8UafRFbt24MNvzi41uuUoSLtlsLUDp6dVfekD4wf1IvV7Ew5Yk5XyHMAjdVongC 07FA1aY6JOiPZeDcvNa11pxlzyciDf22YF8XLoZOsZ/cZN1itjBUMqGRefC51RQP cafmdk0Ms+Xgtq4GwDceLE5QMb/h1K582j4uVu38QMpPqR6WvTnpd/ra4chheJHE nhHHYiN4mWO3lgnp1ZZKooTUyBPAyf3kaP8I7YBrUXuuoy9GNRqKi25uJwALeVqh YKvZqpd6Uw4W/If5EW5zPXlKGv8xSJwaTh6q40sRI0OFMfniy1pLRM3mLKSVqJy6 DKk7Pt4wptWe6Bv6P1hK34acmX6TGcyq53Dg5Nq79E0qul1YRRmHoUHewOeUgwPC XSaaqPSItLQggRXplZVaUm9e8cmjcwU4Od3rqfb/A2JsTniONB3kAI6YoBCsK4O2 SwCbIVP8hkbCo/perun11C4SnsamPdQBmPs1if8PtT72LaNR8HAlFZTgX5yqEFAj ZP9vCgqtdlIE28W9cJLOEMT7KtAzCES2UYbKUDTx+E2GolvoYvA= =pQlU -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.5 Hightlights - new board; ugoos am6, based on G12B SoC - g12: add thermal driver and cooling properties - sm1: enable audio on SEI610 board - IR: add several keymaps - sdio: add keep-power-in-suspend property for multiple boards - pcie: add support for G12A - multiple fixes, cleanups * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (62 commits) arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ARM64: dts: amlogic: adds crypto hardware node arm64: dts: meson-gxbb-vega-s95: set rc-vega-s9x ir keymap arm64: dts: meson-gxm-vega-s96: set rc-vega-s9x ir keymap arm64: dts: meson: g12b: add cooling properties arm64: dts: meson: g12a: add cooling properties arm64: dts: meson: g12: Add minimal thermal zone arm64: dts: meson: g12: add temperature sensor arm64: dts: meson: sei610: enable audio arm64: dts: meson: sm1: add audio devices dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings arm64: dts: meson-g12: add support for simplefb arm64: dts: meson: g12a: add audio devices resets arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator ... Link: https://lore.kernel.org/r/7hd0dzs0m1.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
743f4e5bc0 |
ASPEED device tree updates for 5.5
- Lots of work on the AST2600 boards as bringup continues. There's the eval board, and two IBM boards called Tacoma and Rainier - A new flash layout for OpenBMC systems with larger flashes - Better support for the MAC clocking when talking to a NCSI device, making Linux less reliant on u-boot having done the correct thing - LED fixes for vesin and fp5280g2 - SGPIO support - Facebook network BMC cleanup with the common hardware moved to a shared dtsi -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl3D+0kACgkQa3ZZB4FH cJ6cchAAnM1DkLmnCx8DrNe56ucz5NrA/zLBg+UstQCNhEQZ1nx6qhGM1hz0+U8y I7hhKmGtzXETafFjGfYf1BwIZGtsT6O8/HG5NF6tpr8eh4vqFK7qK7iuusCpCpTh M5edacjiANPfCdJLZSVSVre+WehYracBKn79oDJmqMA9qXRITlYpoYqJTWEjzZtF krpwr9DQMsXAoJ5qQ7fmdWXwvM+n+pG4oF44SQ8dbv1hAQkwGHH6K9ZHpgs/aDT5 IBi6ax1Oawf0PE0zielWxcCeJvsagKhE/UPt5zen1uwbT9n2LSZqOdj3XdPla7QR PCDejNo6i3po7Of1/tzaHc0176pwMjkFW83YyzNmVIxi3VET3zoRJ5YALnrbw9a6 1B1s+XSVr/7/yGgb/mhrpuJ06tZs2DmvGGwiTXq3HmqCQEKEemK0cg2f8L/AXVlA YRMN2jM/JdSkdbTNLShIklTt8SeL/lJej5ke3RiCmUvtzc4Qi44YjNQIJrGg4t+K bDfnNgCEPt+yqkQnyXI+yuDCG8T4YhlDiJfuev3bUCXalHsZFMOKS91w5U5cCJjj VNbRNoDnRVoJOEG29INGXZyeUD0nL9wsOYu5uKNPzebbelUMxX/2X0ghC2q3ZyBW i0Z9fiF9y7R+c/UfW6J4f6gT66nNFp1O5vOqMFo90xgI5d0qJ8k= =79EI -----END PGP SIGNATURE----- Merge tag 'aspeed-5.5-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.5 - Lots of work on the AST2600 boards as bringup continues. There's the eval board, and two IBM boards called Tacoma and Rainier - A new flash layout for OpenBMC systems with larger flashes - Better support for the MAC clocking when talking to a NCSI device, making Linux less reliant on u-boot having done the correct thing - LED fixes for vesin and fp5280g2 - SGPIO support - Facebook network BMC cleanup with the common hardware moved to a shared dtsi * tag 'aspeed-5.5-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (48 commits) ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: aspeed-g5: Add SGPIO description ARM: dts: aspeed: yamp: Use common dtsi ARM: dts: aspeed: minipack: Use common dtsi ARM: dts: aspeed: cmm: Use common dtsi ARM: dts: aspeed: Common dtsi for Facebook AST2500 Network BMCs ARM: dts: aspeed: rainier: gpio-keys for PSU presence ARM: dts: aspeed: rainier: Fix i2c eeprom size ARM: dts: tacoma: Hog LPC pinmux ARM: dts: aspeed: rainier: Enable VUART1 ARM: dts: aspeed: rainier: Add i2c eeproms ARM: dts: aspeed: tacoma: Use 64MB for firmware memory ARM: dts: aspeed: tacoma: Add host FSI description ARM: dts: ast2600evb: Enable UART workaround ARM: dts: aspeed: tacoma: Add UART1 and workaround ARM: dts: aspeed-g6: Add remaining UARTs ARM: dts: aspeed-g6: Fix i2c clock source ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces ARM: dts: aspeed: tacoma: Enable FMC and SPI devices ... Link: https://lore.kernel.org/r/CACPK8Xe8XiJ+oEp3_AXO5Mox-mXWVrOJKQLJMKJxg1WdYCTzMw@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Brian Masney
|
6120e5d821 |
dt-bindings: interconnect: qcom: add msm8974 bindings
Add device tree bindings for the Qualcomm MSM8974 interconnect providers that support setting system bandwidth requirements between various network-on-chip fabrics. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191024103054.9770-2-masneyb@onstation.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191108125349.24191-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Jeffrey Hugo
|
95183d381a |
clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem
We need to control five additional clocks and a reset inorder to boot the modem on msm8998. If we can boot the modem, we have a place to run the wlan firmware and get wifi up and running. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191107192136.5880-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Taniya Das
|
8b9e0562f3 |
dt-bindings: clock: Add sc7180 GCC clock binding
Add device tree bindings for global clock subsystem clock controller for Qualcomm Technology Inc's SC7180 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/20191014102308.27441-5-tdas@codeaurora.org Reviewed-by: Rob Herring <robh@kernel.org> [sboyd@kernel.org: Reword subject to make sc7180 specific, sort compatible] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Govind Singh
|
6cdef2738d |
clk: qcom: Add Q6SSTOP clock controller for QCS404
Add support for the Q6SSTOP clock control used on qcs404 based devices. This would allow wcss remoteproc driver to control the required WCSS Q6SSTOP clock/reset controls to bring the subsystem out of reset and shutdown the WCSS Q6DSP. Signed-off-by: Govind Singh <govinds@codeaurora.org> Link: https://lkml.kernel.org/r/20191011132928.9388-3-govinds@codeaurora.org [sboyd@kernel.org: Sort makefile] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Michael Walle
|
2c63221cd9 |
dt-bindings: net: phy: Add support for AT803X
Document the Atheros AR803x PHY bindings. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Olof Johansson
|
d4b0c97a80 |
Qualcomm ARM Based Driver Updates for v5.5
* Add Bjorn as QCOM co-maintainer * Add LLLC yaml bindings and SC7180 support * Fixups/Cleanup for LLLC * Add SMD-RPM MSM8976 compatible and interconnect device * Add missing RPMD SMD perf level -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJdwP5rAAoJEFKiBbHx2RXVpigQALkNC+SntAom44+EtGe8fZEm Zdd4piMEi2Yr1m07wfSDG0GvOi0W0JP1xJ84BpzNBqqe/oJpmWJlpqfMf9W3ZgM1 /e3QPa5/TvjNznwxUVTIwo4VPMy31pk9ZsRep6vXkGL1zU+vGcXs8/IzaRKHMx/A eE1I1O6dxXQFia0fwSioQpsD6MvhAp447Z2CUQu6JMrEHRIiI+AJ9LgRWynYekv2 elmYvuFKJT+6BWB52hG+ck8Q6efvyhFJTB+Af4emjNmFIRaI26ZvTEDp6XXlb+Pq 0btTKLeEPxveVK8PxPmdNhPHjXvh7582piKXz3LyelPu50LIsElRZv45ACgRgsIF iGawfjgY/eoWqT45dibg2N4Aq2q2p/4JxVZGPOs1inxPOeBfKeOEc1xieHtijMdP BJjzzqj+keDOklfSeKNbFpfIYlZn7QVYCp+3w+mwOYiCf+2qI9Vx1cNaWqL5dzAL t4X0axfjpKTkacL9HgVOibGVLpdaISEqUdtG3UoxhrVOHom01waKRlMQHoEZMICT wG3fipAu8mv/RGz645Lj49FqK4+7DNbS+M3anyfRNypThyt/CI7FnbR6GGLh7jcr jRdt2XO72xNJWV5lZu0Jll0PhstykeLoqPiEB/HlvH6Gl9HF6x5tdMt0ZKwTw2i7 20q3xSE4GCYWVUb51CTk =K+qQ -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm ARM Based Driver Updates for v5.5 * Add Bjorn as QCOM co-maintainer * Add LLLC yaml bindings and SC7180 support * Fixups/Cleanup for LLLC * Add SMD-RPM MSM8976 compatible and interconnect device * Add missing RPMD SMD perf level * tag 'qcom-drivers-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: MAINTAINERS: Add myself as co-maintainer for QCOM dt-bindings: msm: Add LLCC for SC7180 dt-bindings: msm: Convert LLCC bindings to YAML soc: qcom: llcc: Add configuration data for SC7180 soc: qcom: llcc: Move regmap config to local variable soc: qcom: llcc: Name regmaps to avoid collisions soc: qcom: Fix llcc-qcom definitions to include soc: qcom: rpmpd: Add rpm power domains for msm8976 dt-bindings: power: Add missing rpmpd smd performance level soc: qcom: smd-rpm: Add MSM8976 compatible soc: qcom: socinfo: add sdm845 and sda845 soc ids soc: qcom: smd-rpm: Create RPM interconnect proxy child device soc: qcom: Make llcc-qcom a generic driver soc: qcom: Rename llcc-slice to llcc-qcom soc: qcom: llcc cleanup to get rid of sdm845 specific driver file Link: https://lore.kernel.org/r/1573068840-13098-4-git-send-email-agross@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Zhou Yanjie
|
be80507d45 |
dt-bindings: dmaengine: Add X1000 bindings.
Add the dmaengine bindings for the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1571937670-30828-2-git-send-email-zhouyanjie@zoho.com Signed-off-by: Vinod Koul <vkoul@kernel.org> |
|
|
Lukasz Luba
|
fcbd8037f7 |
include: dt-bindings: add Performance Monitoring Unit for Exynos
This patch add support of a new feature which can be used in DT: Performance Monitoring Unit with defined event data type. In this patch the event data types are defined for Exynos PPMU. The patch also updates the MAINTAINERS file accordingly and adds the header file to devfreq event subsystem. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
|
|
Finley Xiao
|
762539d699 |
clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc
EMMC and SDIO already have these clock-ids (still unused) only sdmmc is missing them, so fix that. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20190917081903.25139-1-heiko@sntech.de |
|
|
Jernej Skrabec
|
4441b57ec2
|
clk: sunxi-ng: h3: Export MBUS clock
MBUS clock will be referenced in MBUS controller node. Export it. Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> |
|
|
Qianggui Song
|
26f6a7524d |
pinctrl: add compatible for Amlogic Meson A1 pin controller
Add new compatible name for Amlogic's Meson-A1 pin controller add a dt-binding header file which document the detail pin names. Note that A1 doesn't need DS bank reg any more, use gpio reg as base. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Link: https://lore.kernel.org/r/1572004167-24150-2-git-send-email-qianggui.song@amlogic.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Olof Johansson
|
c267d9960c |
dt-bindings: Changes for v5.5-rc1
This contains various updates to device tree bindings and includes that are related to driver changes in other Tegra branches. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl29jNkTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoSciD/41eSVm8Y++rU95KB+XpmrYQTeRqP9F XLIrrY4sUgDpPwDgfIM/Fmyy2uIl7UtnsMDhBWkwfSkgWJGw083Tim0/eFZBTvGw j+z99xFivav2QjtK0XZp6xfKXWlWpWwQTOW7DKsq22LYiH+7bp1zMbFoy/RkCg/O klX16iwTZs69ym/0UDNj/qB6+MybOFxUffaIvo5cLXq9Us8XSOv7SCiH0TIDXk8f KcqvU5R1nzrrG15Cbxlg/2kkS1QvGSsYj2LC8n6s9dzsMK4Gp3D9DVVr+8W2xbv3 rVGAXffSu+BpzaAKbLGCojJ+lAvA7au9Q9Vm+gtq+QdbzjRgx49/EK0Ys7nC5Pll Txe38oKePEkzTrdD0Y0r5SztRORSGCED4WmgroThomTgX6r/vltEYGxYvIt2/L/F chgcBT4t82tlBf3JvD0YpoH40nmF6vWPnPVmDDIcrXDCBigmEjbztXV0tgBibaDl RuC0BpOGS7bKH9lSlfcRrQRzqnOQXrQoMeRa2/Mv6b6EAG9BZ4+rqaAlGuO1BmsC zSP+loJ96fdTHNWnjN+JHlZy5uVYCCwx/QaF/sVQ2LMiscq9y9QA7kW4p4To2r0r +45nF5CD+gft2fnBK1OmaAiDeFe4/XdMQBOJ+SlDDehWLBhN2xtzJl6UGYlGZOZ5 +QNEeVifuL41+Q== =LlnG -----END PGP SIGNATURE----- Merge tag 'tegra-for-5.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.5-rc1 This contains various updates to device tree bindings and includes that are related to driver changes in other Tegra branches. * tag 'tegra-for-5.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory Controller dt-bindings: memory: Add binding for NVIDIA Tegra30 Memory Controller dt-bindings: memory: tegra30: Convert to Tegra124 YAML dt-bindings: regulator: Document regulators coupling of NVIDIA Tegra20/30 SoCs dt-bindings: clock: tegra: Rename SOR0_LVDS to SOR0_OUT Link: https://lore.kernel.org/r/20191102144521.3863321-1-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
064652ad88 |
Renesas driver updates for v5.5 (take two)
- Initial support for the R-Car M3-W+ (r8a77961) SoC, - A minor fix. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbxFoQAKCRCKwlD9ZEnx cF74AQD1/ZIzny7w792bZ4Pb5yhI9n/Af5Yv+6FZ2iLJITYbpwEA49dcEoq5qGQq wP3BMNwmqg94Y6pkuIUvkJXuStUlTws= =rY64 -----END PGP SIGNATURE----- Merge tag 'renesas-drivers-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers Renesas driver updates for v5.5 (take two) - Initial support for the R-Car M3-W+ (r8a77961) SoC, - A minor fix. * tag 'renesas-drivers-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: rcar-sysc: Add R8A77961 support soc: renesas: rcar-rst: Add R8A77961 support soc: renesas: Identify R-Car M3-W+ soc: renesas: Add ARCH_R8A77961 for new R-Car M3-W+ soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W soc: renesas: Rename SYSC_R8A7796 to SYSC_R8A77960 soc: renesas: Add missing check for non-zero product register address dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions Link: https://lore.kernel.org/r/20191101155842.31467-6-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
571d32c283 |
Renesas ARM64 DT updates for v5.5 (take two)
- Video-Input and Serial-ATA support on RZ/G2N,
- Color Management Module support on various R-Car Gen3 SoCs,
- Initial support for the R-Car M3-W+ (r8a77961) SoC on the
Salvator-XS board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbxHYgAKCRCKwlD9ZEnx
cNS0AQDofwzZRnNq8xUumbw9fg2I79qhVqqBFYpg+R8qV7qgQQD/WwOfSfE6UlCf
fTfpYowfPX8z985u7/vYDVfSv19d/Ag=
=qA0S
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM64 DT updates for v5.5 (take two)
- Video-Input and Serial-ATA support on RZ/G2N,
- Color Management Module support on various R-Car Gen3 SoCs,
- Initial support for the R-Car M3-W+ (r8a77961) SoC on the
Salvator-XS board.
* tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+
arm64: dts: renesas: Add Renesas R8A77961 SoC support
arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960
dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
dt-bindings: power: Add r8a77961 SYSC power domain definitions
arm64: dts: renesas: r8a774b1: Add SATA controller node
arm64: dts: renesas: rcar-gen3: Add CMM units
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support
Link: https://lore.kernel.org/r/20191101155842.31467-5-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
|
Olof Johansson
|
a1094a7c27 |
Realtek ARM64 based SoC DT for v5.5
Add RTD1293 and RTD1296 DTs. Add the watchdog for all of RTD129x DTs. Add reset controllers for RTD129x and start using them for UARTs. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEF08DRxvMIhphdW+W+i7RLT5+AT8FAl25CJkRHGFmYWVyYmVy QHN1c2UuZGUACgkQ+i7RLT5+AT8ndw/+PaYt6B92yzw5DwIYmONvSGuqgy51AFdu Wm6ATtdHGNJllXe7pAHh8a3cQMKAz04N/Xk+kMUfyYtnaQ2fvByS7yiXnMbVqIj7 Q8AmE++ijDM5wTNF45Q3T+Rd7zcMQujElAGu+8l9I4P3iMwItK6LMAAXwCgOelec 8brsLrqbjRNgtICFbds/7fMSn0ZaHiFu5gld07TyPHs5uTtq0raF8wL13X7IgBiB R70U62ux24Ld4SaFOShrgkJjDlPeZH8DH7bRh5PGlEmp822ZrFI//fc7a0HNpC8R ygBz2kmErZ1G9xPUwgEWtnTSh4D9QDJxI1btEaBuMbKI96Yaa9PIqV9tHtjJ0eWr lKEI8ymoFLaNqSQb9sMf7BGYEw/IXF7JAT42SL6APYYPccLezFUjKBRk9hRQBiy7 PNFGXsa+dmvMu5vpYLoyJKmJf8Z7HXkx3buk8rj39ru7AHr37kJdwy3SAqZdH4KZ vFt1r2bFeBBhB+i9PuSrAVS+oL49UDd2IcB/1lZkvy6Y1waxIkJKZJPQVXnkrvtE DUiaq8Fcl4iZHmxL3wIKGdldFb77vCERI5cGwMfbh/qCZ8x+3ra4lEwysOAE9dGb OWO5KkGHIITZkFDQuOJtNcwXXsM2W4EgKmMdfnStFXycim1Wc3V7ACPyB2GuUR4Y lgdneqA9dpo= =yVVf -----END PGP SIGNATURE----- Merge tag 'realtek-arm64-dt-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt Realtek ARM64 based SoC DT for v5.5 Add RTD1293 and RTD1296 DTs. Add the watchdog for all of RTD129x DTs. Add reset controllers for RTD129x and start using them for UARTs. * tag 'realtek-arm64-dt-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: arm64: dts: realtek: Add RTD129x UART resets arm64: dts: realtek: Add RTD129x reset controller nodes dt-bindings: reset: Add Realtek RTD1295 arm64: dts: realtek: Add watchdog node for RTD129x arm64: dts: realtek: Add oscillator for RTD129x arm64: dts: realtek: Add RTD1296 and Synology DS418 dt-bindings: arm: realtek: Document RTD1296 and Synology DS418 arm64: dts: realtek: Add RTD1293 and Synology DS418j arm64: dts: realtek: Change dual-license from MIT to BSD dt-bindings: arm: realtek: Document RTD1293 and Synology DS418j dt-bindings: arm: realtek: Tidy up conversion to json-schema Link: https://lore.kernel.org/r/20191030041000.31848-2-afaerber@suse.de Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Codrin Ciubotariu
|
0b32928528 |
pinctrl: at91: Enable slewrate by default on SAM9X60
On SAM9X60, slewrate should be enabled on pins with a switching frequency below 50Mhz. Since most of our pins do not exceed this value, we enable slewrate by default. Pins with a switching value that exceeds 50Mhz will have to explicitly disable slewrate. This patch changes the ABI. However, the slewrate macros are only used by SAM9X60 and, at this moment, there are no device-tree files available for this platform. Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20191101092031.24896-1-codrin.ciubotariu@microchip.com Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Geert Uytterhoeven
|
16208387bb |
Renesas R-Car M3-W+ DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbwQzAAKCRCKwlD9ZEnx cGA2AQDvA8Uaf/WQ1zzq5GgHPB6R35ciBFCVn3AG+6izUqsCPAEA0FGEHsrNtWyG rcJ+C/8vBJ+Pe359DmXaELorJ4Xm6wQ= =EV4L -----END PGP SIGNATURE----- Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into renesas-drivers-for-v5.5 Renesas R-Car M3-W+ DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files. |
|
|
Geert Uytterhoeven
|
7574ed0e08 |
Renesas R-Car M3-W+ DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbwQzAAKCRCKwlD9ZEnx cGA2AQDvA8Uaf/WQ1zzq5GgHPB6R35ciBFCVn3AG+6izUqsCPAEA0FGEHsrNtWyG rcJ+C/8vBJ+Pe359DmXaELorJ4Xm6wQ= =EV4L -----END PGP SIGNATURE----- Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into renesas-arm64-dt-for-v5.5 Renesas R-Car M3-W+ DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files. |
|
|
Geert Uytterhoeven
|
b07e816fc4 |
Renesas R-Car M3-W+ DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbwQzAAKCRCKwlD9ZEnx cGA2AQDvA8Uaf/WQ1zzq5GgHPB6R35ciBFCVn3AG+6izUqsCPAEA0FGEHsrNtWyG rcJ+C/8vBJ+Pe359DmXaELorJ4Xm6wQ= =EV4L -----END PGP SIGNATURE----- Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into clk-renesas-for-v5.5 Renesas R-Car M3-W+ DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files. |
|
|
Geert Uytterhoeven
|
0b05ad22a2 |
dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car
M3-W+ (R8A77961) SoC, as listed in Table 8.2b ("List of Clocks [R-Car
M3-W/R-Car M3-W+]") of the R-Car Series, 3rd Generation Hardware User's
Manual (Rev. 2.00, Jul. 31, 2019). A gap is added for CSIREF, to
preserve compatibility with the definitions for R-Car M3-W (R8A77960).
Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, SSPSRC, and POST2)
are not included, as they are used as internal clock sources only, and
never referenced from DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191023122941.12342-3-geert+renesas@glider.be
|
|
|
Geert Uytterhoeven
|
640f9606dc |
dt-bindings: power: Add r8a77961 SYSC power domain definitions
Add power domain indices for the R-Car M3-W+ (R8A77961) SoC. Based on Rev. 2.00 of the R-Car Series, 3rd Generation, Hardware User’s Manual (Jul. 31, 2019). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20191023122911.12166-6-geert+renesas@glider.be |
|
|
Andrew Jeffery
|
d8d9ad83a4 |
dt-bindings: clock: Add AST2600 RMII RCLK gate definitions
The AST2600 has an explicit gate for the RMII RCLK for each of the four MACs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au> |
|
|
Andrew Jeffery
|
5b468cc4b8 |
dt-bindings: clock: Add AST2500 RMII RCLK definitions
The AST2500 has an explicit gate for the RMII RCLK for each of the two MACs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au> |
|
|
Tero Kristo
|
2d5f60afd2 |
dt-bindings: clk: add omap5 iva clkctrl definitions
OMAP5 device contains an IVA subsystem (Image and Video Accelerator.) IVA subsystem clkctrl definitions are currently missing, so add them. Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Thierry Reding
|
cdc2d6685c |
dt-bindings: clock: tegra: Rename SOR0_LVDS to SOR0_OUT
Tegra186 and later call this clock SOR0_OUT. Rename it on Tegra124 and Tegra210 to make the names consistent. Keep the old name for now to keep device trees buildable until they have all been converted. Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
Andreas Färber
|
4df56a1eb1 |
dt-bindings: reset: Add Realtek RTD1295
Add a header with symbolic reset indices for Realtek RTD1295 SoC. Naming was derived from reset-names in an OEM's Device Tree. Acked-by: Rob Herring <robh@kernel.org> [AF: Dropped RTD1295 specific binding definition, updated SPDX] Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Olof Johansson
|
b7f7a0b58f |
Reset controller updates for v5.5
This tag adds support for Meson SM1 ARB resets, Uniphier Pro5 USB3 resets, the Meson-A1 reset controller, SocFPGA Agilex resets, and Realtek RTD1195/RTD1295 resets. It adds some reset controller API keywords for get_maintainers.pl and makes a few remaining reset_control_ops const. Also included are a conversion of the Qualcomm device tree bindings to yaml and a few small kerneldoc improvements. -----BEGIN PGP SIGNATURE----- iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXbbwUxcccC56YWJlbEBw ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwEKeAP498UhJ8+GB8PUCpRIPAmFwjAON n+2EFHTn5Od08ueqqAEA4SH13tR5PJBo6G/J6KgLULUFts4Uc/Hb760/2ai3eQw= =eyHx -----END PGP SIGNATURE----- Merge tag 'reset-for-v5.5' of git://git.pengutronix.de/git/pza/linux into arm/drivers Reset controller updates for v5.5 This tag adds support for Meson SM1 ARB resets, Uniphier Pro5 USB3 resets, the Meson-A1 reset controller, SocFPGA Agilex resets, and Realtek RTD1195/RTD1295 resets. It adds some reset controller API keywords for get_maintainers.pl and makes a few remaining reset_control_ops const. Also included are a conversion of the Qualcomm device tree bindings to yaml and a few small kerneldoc improvements. * tag 'reset-for-v5.5' of git://git.pengutronix.de/git/pza/linux: reset: document (devm_)reset_control_get_optional variants reset: improve of_xlate documentation reset: simple: Add Realtek RTD1195/RTD1295 reset: simple: Keep alphabetical order MAINTAINERS: add reset controller framework keywords reset: zynqmp: Make reset_control_ops const reset: hisilicon: hi3660: Make reset_control_ops const reset: build simple reset controller driver for Agilex reset: add support for the Meson-A1 SoC Reset Controller dt-bindings: reset: add bindings for the Meson-A1 SoC Reset Controller reset: uniphier-glue: Add Pro5 USB3 support dt-bindings: reset: pdc: Convert PDC Global bindings to yaml dt-bindings: reset: aoss: Convert AOSS reset bindings to yaml reset: Remove copy'n'paste redundancy in the comments reset: meson-audio-arb: add sm1 support reset: dt-bindings: meson: update arb bindings for sm1 Link: https://lore.kernel.org/r/ede6874508472d0917dca770ef80b90626b0f205.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Fancy Fang
|
72b2429d40 |
clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock
The mipi pll clock comes from the MIPI PHY PLL output, so it should not be a fixed clock. MIPI PHY PLL is in the MIPI DSI space, and it is used as the bit clock for transferring the pixel data out and its output clock is configured according to the display mode. So it should be used only for MIPI DSI and not be exported out for other usages. Signed-off-by: Fancy Fang <chen.fang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Leonard Crestez
|
e8688fe8df |
clk: imx8mn: Define gates for pll1/2 fixed dividers
On imx8mn there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Leonard Crestez
|
3e4947acad |
clk: imx8mm: Define gates for pll1/2 fixed dividers
On imx8mm there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate. Only one of these gates (the one "dividing" by one) is currently defined and it's incorrectly set as the parent of all the fixed-factor dividers. Add the other 8 gates to the clock tree between sys_pll1/2_bypass and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Leonard Crestez
|
b04383b6a5 |
clk: imx8mq: Define gates for pll1/2 fixed dividers
On imx8mq there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2 each with their own gate but these gates are not currently defined in the clock tree. Add them between sys1/2_pll_out and the fixed dividers. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Olof Johansson
|
ee1d28a449 |
A lot of improvements for the (till now) somewhat dormant px30 soc,
power-tree improvements ofr the roc-rk3399-pc, after a long wait also support for the CR50 TPM device found on some RK3399-Gru devices, some audio and gmac improvements for NanoPi4 and Rockpro64 as well as marking the redundant RK_FUNC_x -> x mapping as deprecated and fixing a missing #msi-cells on rk3399. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl2tn3IQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgRQcB/4zxlsdUJbwmocLmZadCfBYII1QKdeh2kcr u4D1T3KuxFjLPCjDcIdZ94+i8iruvXDjPi/PYGBQc63RQmgTud1woEmL5NxBsNOe TJm9VOHKbkIYxnwSfrkBNTgtmKvxl6H0VWXpUA85f01s7HDAPnk+/8p37Vm22mIa +MJy6dFHN2/jM6PC9E0rMmS4GEn90b7US0SRHHu2ENtZTH9qKWPW5+9RUqkgQsnl qvnopEervmbQ0Di50L1KTaeEnzzCgbclc95rGMWmsUwAXe6gS9UmKuVlSogHCSP3 u4h6gsCPW4IwV4lkYVVubDn3eB0r0T8FUSdNIGUqZ0KYPYgPClun =BXS2 -----END PGP SIGNATURE----- Merge tag 'v5.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt A lot of improvements for the (till now) somewhat dormant px30 soc, power-tree improvements ofr the roc-rk3399-pc, after a long wait also support for the CR50 TPM device found on some RK3399-Gru devices, some audio and gmac improvements for NanoPi4 and Rockpro64 as well as marking the redundant RK_FUNC_x -> x mapping as deprecated and fixing a missing #msi-cells on rk3399. * tag 'v5.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: include: dt-bindings: rockchip: mark RK_FUNC defines as deprecated arm64: dts: rockchip: restyle rockchip,pins on rk3399-rock-pi-4 arm64: dts: rockchip: Update nanopi4 phy reset properties arm64: dts: rockchip: Enable nanopi4 HDMI audio arm64: dts: rockchip: add cr50 tpm to rk3399-gru scarlet and bob arm64: dts: rockchip: add analog audio nodes on rk3399-rockpro64 arm64: dts: rockchip: add missing #msi-cells to rk3399 arm64: dts: rockchip: Fix roc-rk3399-pc regulator input rails arm64: dts: rockchip: Rename vcc12v_sys into dc_12v for roc-rk3399-pc dt-bindings: document PX30 usb2phy General Register Files arm64: dts: rockchip: add px30-evb i2c1 devices arm64: dts: rockchip: document explicit px30 cru dependencies arm64: dts: rockchip: remove unused pin settings from px30 arm64: dts: rockchip: move px30-evb console output to uart 5 arm64: dts: rockchip: add emmc-powersequence to px30-evb arm64: dts: rockchip: fix the px30-evb power tree arm64: dts: rockchip: add default px30 emmc pinctrl arm64: dts: rockchip: remove px30 emmc_pwren pinctrl arm64: dts: rockchip: remove static xin32k from px30 arm64: dts: rockchip: fix iface clock-name on px30 iommus Link: https://lore.kernel.org/r/1650793.YZj09CGBNl@phil Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Maciej Falkowski
|
6cc23ed2ce
|
ASoC: samsung: i2s: Document clocks macros
Document clocks macros with their description from 'Documentation/devicetree/bindings/sound/samsung-i2s.txt' Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20190926110219.6144-1-m.szyprowski@samsung.com Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Johan Jonker
|
d083ce4279 |
include: dt-bindings: rockchip: mark RK_FUNC defines as deprecated
The defines RK_FUNC_1, RK_FUNC_2, RK_FUNC_3 and RK_FUNC_4 are no longer used. Mark them as "deprecated" to prevent that someone start using them again. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20191015205852.4200-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
|
|
Kevin Hilman
|
f21ab7906d |
First round of amlogic DT binding clock update target for v5.5
Add the audio clock and reset bindings for the sm1 SoC family -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE9OFZrhjz9W1fG7cb5vwPHDfy2oUFAl2cO+cACgkQ5vwPHDfy 2oXQug//cqVN9hhMgZv+an1DmZbJ2vt2lJvs9ddk2eNodlLC3wvz93YeNyqNn79p 11KNDBtgaorR5o41wfjHSlqZBqQQjhIPKdod/i5xzAJSi/0d6GzahrcUp6jXsE5o dzImQcGXzhhYpK21JXftq3OBqwEQrML5DgW+ab42IoV8CERCDSavpn/ZYP2RRqBY +5n1owpW+2f5xp2fkT5T/HGrDEdAbgM3lZEgM4w/2Tp9XpBxHDqbS7iDV7OLV+4/ Mb4zXwB9ra7u/bxEIPi4tpUaruZYfNFd5c3lWOd6nD+218UHo2pF0ZLlaNhw3Xdp 0M9Cyjy5hgqPDWTfmVKkKQKWXY7ys06rvLXowAfaob0SpHKV11QtPnmJYhsmDP60 vQTwi1ejfl/KsmNm6b6OTuRdflRCuDVueUuuX1xIFc30phnoqt99pvjz8GVSzqiX rx3QdYvhXbi0ioqSjdiu8KITBjdllsfPpO42qMsnU5wOWeOLQk9Ju42yK9IFwjSs C5aDeo9WEaUHYHJpI+KXdB38BFDEv2qvKz729t/tnenmgq0F+gy1CUPtwIe0rP8J GxK/KEEgCuwuwL/LcSb9iA7U2ycmDE0G6Kqoh0kTQd698CeIvPiLy9+yNP5HZeyT 2eUFGpKGSyZ25P5SAIHkQ2PSScjsQ5wemsf1jFuJgn/dngPEDkM= =XPSR -----END PGP SIGNATURE----- Merge tag 'clk-meson-dt-v5.5-1' of git://github.com/BayLibre/clk-meson into v5.5/dt64-redo First round of amlogic DT binding clock update target for v5.5 Add the audio clock and reset bindings for the sm1 SoC family * tag 'clk-meson-dt-v5.5-1' of git://github.com/BayLibre/clk-meson: dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings |
|
|
Laurentiu Palcu
|
f0b1d7f2e7 |
clk: imx8mq: Add VIDEO2_PLL clock
This clock is needed by DCSS when high resolutions are used. Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> CC: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Greg Kroah-Hartman
|
9dc86c234e |
First set of IIO new device support, cleanups and features for the 5.5 cycle
Third version with the adis rework set dropped as better to just have
a fresh version of that at some future date.
The usual mixed backs of new device support being added to drivers,
long term reworks continuing and little per driver cleanups and
features.
Also a few trivial counter subsystem tidy ups on behalf of William.
Core new feature
* Device label support. A long requested feature no one got around to
implementing before. Allows DT based provision of a 'label' that
identifies a device uniquely within a system. This differs from existing
'name' which is meant to be the part number.
New device support
* ingenic-adc
- Support for the JZ4770 SoC ADC including bindings.
* inv_mpu6050
- Add support for magnetometer in MPU925x parts.
Fiddly to do as this is actually a separate device sitting inside the
package, but with the master device being able to schedule reads etc.
Will only run if the auxiliary bus is not in use for any other devices.
Features
* ad7192
- Userspace calibration controls to do zero and full scale.
* st_lsm6dsx
- Enable latched interrupts by default for sensors events with related clear.
- Motion events and related wakeup source. This needed quite a bit of
refactoring as well.
Cleanups and minor features
* ad7192
- sysfs ABI docs
* ad7949
- Remove code to readback configuration word as driver never actually enabled
it.
- Fix incorrect xfer length. Not actually known to cause problems other
than wasted bus usage.
* adis16080
- Replace core mlock usage with local lock with more appropriate scope.
* adis16130
- Remove pointless mlock usage.
* adis16240
- Remove include of gpio.h as no gpio usage.
* atlas-ph-sensor
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* bh1750
- Fix up a static compiler warning and make the code more readable.
- yaml conversion of binding + MAINTAINERS entry.
* bmp280
- Drop a stray newline.
* cm36651
- Drop a redundant assignment
* itg3200
- Alignment cleanup.
* max31856
- Add missing of_node and parent references, useful to identify the device.
* sc27xx_adc
- Use devm_hwspin_lock_request_specific rather than local rolled version.
* stm32-lptimer counter
- kernel-doc warning.
* stm32-timer counter
- kernel-doc warning.
- Alignment cleanup.
* sx9500
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* tcs3414
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
-----BEGIN PGP SIGNATURE-----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=nIWU
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of IIO new device support, cleanups and features for the 5.5 cycle
Third version with the adis rework set dropped as better to just have
a fresh version of that at some future date.
The usual mixed backs of new device support being added to drivers,
long term reworks continuing and little per driver cleanups and
features.
Also a few trivial counter subsystem tidy ups on behalf of William.
Core new feature
* Device label support. A long requested feature no one got around to
implementing before. Allows DT based provision of a 'label' that
identifies a device uniquely within a system. This differs from existing
'name' which is meant to be the part number.
New device support
* ingenic-adc
- Support for the JZ4770 SoC ADC including bindings.
* inv_mpu6050
- Add support for magnetometer in MPU925x parts.
Fiddly to do as this is actually a separate device sitting inside the
package, but with the master device being able to schedule reads etc.
Will only run if the auxiliary bus is not in use for any other devices.
Features
* ad7192
- Userspace calibration controls to do zero and full scale.
* st_lsm6dsx
- Enable latched interrupts by default for sensors events with related clear.
- Motion events and related wakeup source. This needed quite a bit of
refactoring as well.
Cleanups and minor features
* ad7192
- sysfs ABI docs
* ad7949
- Remove code to readback configuration word as driver never actually enabled
it.
- Fix incorrect xfer length. Not actually known to cause problems other
than wasted bus usage.
* adis16080
- Replace core mlock usage with local lock with more appropriate scope.
* adis16130
- Remove pointless mlock usage.
* adis16240
- Remove include of gpio.h as no gpio usage.
* atlas-ph-sensor
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* bh1750
- Fix up a static compiler warning and make the code more readable.
- yaml conversion of binding + MAINTAINERS entry.
* bmp280
- Drop a stray newline.
* cm36651
- Drop a redundant assignment
* itg3200
- Alignment cleanup.
* max31856
- Add missing of_node and parent references, useful to identify the device.
* sc27xx_adc
- Use devm_hwspin_lock_request_specific rather than local rolled version.
* stm32-lptimer counter
- kernel-doc warning.
* stm32-timer counter
- kernel-doc warning.
- Alignment cleanup.
* sx9500
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* tcs3414
- Improve logical ordering of buffer predisable / postenable functions.
This is part of a longer term rework Alexandru is driving towards.
* tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits)
iio: pressure: bmp280: remove stray newline
iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code
iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
iio: gyro: clean up indentation issue
counter: stm32: clean up indentation issue
iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions
iio: core: Add optional symbolic label to device attributes
dt-binding: iio: Add optional label property
iio: gyro: adis16080: replace mlock with own lock
counter: stm32-lptimer-cnt: fix a kernel-doc warning
counter: stm32-timer-cnt: fix a kernel-doc warning
iio: gyro: adis16130: remove mlock usage
MAINTAINERS: add entry for ROHM BH1750 driver
dt-bindings: iio: light: bh1750: convert bindings to yaml
iio: imu: st_lsm6dsx: add motion report function and call from interrupt
iio: imu: st_lsm6dsx: always enter interrupt thread
iio: imu: st_lsm6dsx: add wakeup-source option
iio: imu: st_lsm6dsx: add motion events
iio: imu: st_lsm6dsx: move interrupt thread to core
iio: imu: inv_mpu6050: add fifo support for magnetometer data
...
|
|
|
Xingyu Chen
|
5d9730b9eb |
dt-bindings: reset: add bindings for the Meson-A1 SoC Reset Controller
Add DT bindings for the Meson-A1 SoC Reset Controller include file, and also slightly update documentation. Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
|
|
Jerome Brunet
|
aa03ea9bce |
dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
Add the reset id of the sm1 audio clock controller Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> |
|
|
Jerome Brunet
|
0ea0a188fd |
dt-bindings: clk: axg-audio: add sm1 bindings
Add the compatible and clock ids of the sm1 audio clock controller Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> |
|
|
AngeloGioacchino Del Regno
|
b1d522443b |
soc: qcom: rpmpd: Add rpm power domains for msm8976
The MSM8956/76 SoCs have two main voltage-level power domains, VDD_CX and VDD_MX, which also have their own voltage-floor-level (VFL) corner. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> |
|
|
Angelo G. Del Regno
|
4bc6aadbcc |
dt-bindings: power: Add missing rpmpd smd performance level
The RPM_SMD_LEVEL_TURBO_HIGH is used by MSM8956/8976 and APQ variants: add the definition. Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> |
|
|
Jerome Brunet
|
c2016cc612 |
reset: dt-bindings: meson: update arb bindings for sm1
SM1 SoC family adds two new audio FIFOs with the related arb reset lines Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> |
|
|
Biju Das
|
54ce17dd40 |
dt-bindings: clk: Add r8a774b1 CPG Core Clock Definitions
Add all RZ/G2N Clock Pulse Generator Core Clock Outputs, as listed in
Table 8.2d ("List of Clocks [RZ/G2N]") of the RZ/G2N Hardware User's
Manual.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1567666360-28035-1-git-send-email-biju.das@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
|
Biju Das
|
be67c41781 |
dt-bindings: power: Add r8a774b1 SYSC power domain definitions
This patch adds power domain indices for the RZ/G2N (a.k.a r8a774b1) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1567666326-27373-1-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
|
|
Linus Torvalds
|
5c6bd5de3c |
Main MIPS changes for v5.4:
- boot_mem_map is removed, providing a nice cleanup made possible by the
recent removal of bootmem.
- Some fixes to atomics, in general providing compiler barriers for
smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or
MIPS32 systems using cmpxchg64().
- Conversion to the new generic VDSO infrastructure courtesy of Vincenzo
Frascino.
- Removal of undefined behavior in set_io_port_base(), fixing the
behavior of some MIPS kernel configurations when built with recent
clang versions.
- Initial MIPS32 huge page support, functional on at least Ingenic SoCs.
- pte_special() is now supported for some configurations, allowing among
other things generic fast GUP to be used.
- Miscellaneous fixes & cleanups.
And platform specific changes:
- Major improvements to Ingenic SoC support from Paul Cercueil, mostly
enabled by the inclusion of the new TCU (timer-counter unit) drivers
he's spent a very patient year or so working on. Plus some fixes for
X1000 SoCs from Zhou Yanjie.
- Netgear R6200 v1 systems are now supported by the bcm47xx platform.
- DT updates for BMIPS, Lantiq & Microsemi Ocelot systems.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXYaqpRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2JUQD+PQGFIlq9bo/3vLyqsXJffm+DhwVQ
4WSCSeN5brPkO8EA/153sRJBlRtG+KK5p9f7WYKUuBfbcEawuc1uwmKuy7cG
=lWlM
-----END PGP SIGNATURE-----
Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
"Main MIPS changes:
- boot_mem_map is removed, providing a nice cleanup made possible by
the recent removal of bootmem.
- Some fixes to atomics, in general providing compiler barriers for
smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
or MIPS32 systems using cmpxchg64().
- Conversion to the new generic VDSO infrastructure courtesy of
Vincenzo Frascino.
- Removal of undefined behavior in set_io_port_base(), fixing the
behavior of some MIPS kernel configurations when built with recent
clang versions.
- Initial MIPS32 huge page support, functional on at least Ingenic
SoCs.
- pte_special() is now supported for some configurations, allowing
among other things generic fast GUP to be used.
- Miscellaneous fixes & cleanups.
And platform specific changes:
- Major improvements to Ingenic SoC support from Paul Cercueil,
mostly enabled by the inclusion of the new TCU (timer-counter unit)
drivers he's spent a very patient year or so working on. Plus some
fixes for X1000 SoCs from Zhou Yanjie.
- Netgear R6200 v1 systems are now supported by the bcm47xx platform.
- DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"
* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
MIPS: Detect bad _PFN_SHIFT values
MIPS: Disable pte_special() for MIPS32 with RiXi
MIPS: ralink: deactivate PCI support for SOC_MT7621
mips: compat: vdso: Use legacy syscalls as fallback
MIPS: Drop Loongson _CACHE_* definitions
MIPS: tlbex: Remove cpu_has_local_ebase
MIPS: tlbex: Simplify r3k check
MIPS: Select R3k-style TLB in Kconfig
MIPS: PCI: refactor ioc3 special handling
mips: remove ioremap_cachable
mips/atomic: Fix smp_mb__{before,after}_atomic()
mips/atomic: Fix loongson_llsc_mb() wreckage
mips/atomic: Fix cmpxchg64 barriers
MIPS: Octeon: remove duplicated include from dma-octeon.c
firmware: bcm47xx_nvram: Allow COMPILE_TEST
firmware: bcm47xx_nvram: Correct size_t printf format
MIPS: Treat Loongson Extensions as ASEs
MIPS: Remove dev_err() usage after platform_get_irq()
MIPS: dts: mscc: describe the PTP ready interrupt
MIPS: dts: mscc: describe the PTP register range
...
|
|
|
Linus Torvalds
|
f97c81dc6c |
ARM: SoC: late updates for v5.4
This is some material that we picked up into our tree late or
that had complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the most
interesting new additions:
The new Aspeed AST2600 baseboard management controller is added, this
is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
dependencies on other device drivers.
After many years, support for the MMP2 based OLPC XO-1.75 finally makes
it into the kernel.
The Armada 3720 based Turris Mox open source router platform is a late
addition and it follows some preparatory work across multiple branches.
The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of the
now-unused platform data.
The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Qtkp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Arnd Bergmann:
"This is some material that we picked up into our tree late or that had
complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the
most interesting new additions:
- The new Aspeed AST2600 baseboard management controller is added,
this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
had some dependencies on other device drivers.
- After many years, support for the MMP2 based OLPC XO-1.75 finally
makes it into the kernel.
- The Armada 3720 based Turris Mox open source router platform is a
late addition and it follows some preparatory work across multiple
branches.
- The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of
the now-unused platform data.
- The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window"
[ This pull request itself wasn't actually sent late at all by Arnd, but
I waited on the branches that it used to be pulled first, so it ends
up being merged much later than the other ARM SoC pull requests this
merge window - Linus ]
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
ARM: dts: dir685: Drop spi-cpol from the display
ARM: dts: aspeed: Add AST2600 pinmux nodes
ARM: dts: aspeed: Add AST2600 and EVB
ARM: exynos: Enable support for ARM architected timers
ARM: samsung: Fix system restart on S3C6410
ARM: dts: mmp2: add OLPC XO 1.75 machine
ARM: dts: mmp2: rename the USB PHY node
ARM: dts: mmp2: specify reg-shift for the UARTs
ARM: dts: mmp2: add camera interfaces
ARM: dts: mmp2: fix the SPI nodes
ARM: dts: mmp2: trivial whitespace fix
arm64: dts: marvell: add DTS for Turris Mox
dt-bindings: marvell: document Turris Mox compatible
arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
arm64: dts: ti: k3-j721e-main: Add hwspinlock node
arm64: dts: ti: k3-am65-main: Add hwspinlock node
arm64: dts: k3-j721e: Add gpio-keys on common processor board
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
...
|
|
|
Linus Torvalds
|
a703d279c5 |
We have a small collection of core framework updates this time, mostly around
clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6 -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl2FQEMRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSXHQw//XHnT5DPphpP8ua4x8wuJARdf0n58Vcdb 8fZxxs4QN7uuKhg6aMI4kgwBn+9tgIr65hvN0Gn9Wm5Bsbs3XZvdIo7DvQDrYg7W NE7192iy2Dg+m+C24YLO7ceZgqVepbjeN+6oeUK88Ui+H+XlOKfJvjfnJ+HxN9Ip sHnLakIxqlaWvzwTUOHOcsrHyQD2OXupbfNMxLnmr8T/kBh/nqwNEG3aYCppICsg LpJL9Bv2V3QSk8uBszTgKK5ybWo14aDQPx4rrhgsneD0h7DSnx6M3jvngxMra6W0 fnare4FQlkbPmgAj+XtB7RdCzsuwoke/7TJsvDLQrEbyOYTGnl7bYS8NOSrIg5Tp w4UPpXrMTQK7e/6okL1OJYAXXYurxep8QjsjpF3nahxC3IVzAZ9uio6ehJrDNEPC ErqOSPQTMkjOA2npovsQKCH3Mv/yGzAigpsQassPneWwp//NupMLKmmIm6645Xw2 6kqSlVFYz81lhzIylGEQKIoiLcszpB6qqWUzGVt0B94joRbvg0m//8BDaZbHeTqP m/acRYHRC1utpkAZEnBZRsd79cI+EeuARROUfGsoUMfOueTc4+qQ7Yrjbj4rTvnC lLM9Qz9h1QkfyRF1IHHPw/fS5twpNTUdO9c1+3qzS3AQfl5dZWpChoF9Um+ycVPR nQrpk05pHEY= =z8wK -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ... |
|
|
Stephen Boyd
|
b6c444de05 |
Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and 'clk-actions' into clk-next
- Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Evict parents from parent cache when they're unregistered * clk-cdce-regulator: clk: clk-cdce925: Add regulator support dt-bindings: clock: cdce925: Add regulator documentation * clk-bcm: clk: bcm2835: Mark PLLD_PER as CRITICAL clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support clk: bcm2835: Introduce SoC specific clock registration dt-bindings: bcm2835-cprman: Add bcm2711 support * clk-evict-parent-cache: clk: Evict unregistered clks from parent caches * clk-actions: clk: actions: Fix factor clk struct member access |
|
|
Stephen Boyd
|
91bcbc11d6 |
Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-next
* clk-renesas: clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain dt-bindings: clk: emev2: Rename bindings documentation file clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper * clk-rockchip: clk: rockchip: Add clock controller for the rk3308 clk: rockchip: Add dt-binding header for rk3308 dt-bindings: Add bindings for rk3308 clock controller clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver * clk-const: clk: spear: Make structure i2s_sclk_masks constant * clk-simplify: clk/ti: Use kmemdup rather than duplicating its implementation clk: fix devm_platform_ioremap_resource.cocci warnings |
|
|
Stephen Boyd
|
a1ff1ce300 |
Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-next
- Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1 |
|
|
Stephen Boyd
|
f5c7305db3 |
Merge branches 'clk-qcom', 'clk-mtk', 'clk-armada', 'clk-ingenic' and 'clk-meson' into clk-next
- Support qcom SM8150 RPMh clks - Set floor ops for qcom sd clks - Support qcom QCS404 WCSS clks - Support for Mediatek MT6779 SoCs - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) * clk-qcom: clk: qcom: rcg: Return failure for RCG update clk: qcom: fix QCS404 TuringCC regmap clk: qcom: clk-rpmh: Add support for SM8150 dt-bindings: clock: Document SM8150 rpmh-clock compatible clk: qcom: clk-rpmh: Convert to parent data scheme dt-bindings: clock: Document the parent clocks clk: qcom: gcc: Use floor ops for SDCC clocks clk: qcom: gcc-qcs404: Use floor ops for sdcc clks clk: qcom: gcc-sdm845: Use floor ops for sdcc clks clk: qcom: define probe by index API as common API clk: qcom: Add WCSS gcc clock control for QCS404 clk: qcom: msm8916: Don't build by default clk: qcom: gcc: Add global clock controller driver for SM8150 dt-bindings: clock: Document gcc bindings for SM8150 clk: qcom: clk-alpha-pll: Add support for Trion PLLs clk: qcom: clk-alpha-pll: Remove post_div_table checks clk: qcom: clk-alpha-pll: Remove unnecessary cast * clk-mtk: clk: mediatek: Runtime PM support for MT8183 mcucfg clock provider clk: mediatek: Register clock gate with device clk: mediatek: add pericfg clocks for MT8183 dt-bindings: clock: mediatek: add pericfg for MT8183 clk: mediatek: Add MT6779 clock support clk: mediatek: Add dt-bindings for MT6779 clocks dt-bindings: mediatek: bindings for MT6779 clk clk: reset: Modify reset-controller driver * clk-armada: clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: mvebu: ap806: Fix clock name for the cluster clk: mvebu: add CPU clock driver for Armada 7K/8K clk: mvebu: add helper file for Armada AP and CP clocks dt-bindings: ap806: add the cluster clock node in the syscon file * clk-ingenic: clk: ingenic: Use CLK_OF_DECLARE_DRIVER macro clk: ingenic/jz4740: Fix "pll half" divider not read/written properly * clk-meson: (23 commits) clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock clk: meson: g12a: add support for SM1 GP1 PLL dt-bindings: clk: meson: add sm1 periph clock controller bindings clk: meson: axg-audio: add g12a reset support dt-bindings: clock: meson: add resets to the audio clock controller clk: meson: g12a: expose CPUB clock ID for G12B clk: meson: g12a: add notifiers to handle cpu clock change clk: meson: add g12a cpu dynamic divider driver clk: core: introduce clk_hw_set_parent() clk: meson: remove clk input helper clk: meson: remove ee input bypass clocks clk: meson: clk-regmap: migrate to new parent description method clk: meson: meson8b: migrate to the new parent description method clk: meson: axg: migrate to the new parent description method clk: meson: gxbb: migrate to the new parent description method clk: meson: g12a: migrate to the new parent description method clk: meson: remove ao input bypass clocks clk: meson: axg-aoclk: migrate to the new parent description method clk: meson: gxbb-aoclk: migrate to the new parent description method ... |
|
|
Linus Torvalds
|
b682242f60 |
- qcom : enable support for ipq8074, sm1850 and sm7180.
add child device node for qcs404.
misc fixes.
- mediatek : enable support for mt8183.
misc rejig of cmdq driver.
new client-reg dt property.
- armada: use device-managed registration api
-----BEGIN PGP SIGNATURE-----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=V6QY
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v5.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom:
- enable support for ipq8074, sm1850 and sm7180
- add child device node for qcs404
- misc fixes
- mediatek:
- enable support for mt8183
- misc rejig of cmdq driver
- new client-reg dt property
- armada:
- use device-managed registration api
* tag 'mailbox-v5.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: qcom-apcs: fix max_register value
mailbox: qcom: Add support for IPQ8074 APCS
dt-bindings: mailbox: qom: Add ipq8074 APPS compatible
mailbox: qcom: Add support for Qualcomm SM8150 and SC7180 SoCs
dt-bindings: mailbox: Add APSS shared for SM8150 and SC7180 SoCs
mbox: qcom: replace integer with valid macro
mbox: qcom: add APCS child device for QCS404
mailbox: mediatek: cmdq: clear the event in cmdq initial flow
mailbox: mediatek: cmdq: support mt8183 gce function
mailbox: mediatek: cmdq: move the CMDQ_IRQ_MASK into cmdq driver data
dt-binding: gce: add binding for gce client reg property
dt-binding: gce: add gce header file for mt8183
dt-binding: gce: remove thread-num property
mailbox: armada-37xx-rwtm: Use device-managed registration API
|
|
|
Linus Torvalds
|
e3a008ac12 |
Devicetree updates for v5.4:
- A bunch of DT binding conversions to DT schema format - Clean-ups of the Arm idle-states binding - Support a default number of cells in of_for_each_phandle() when the cells name is missing - Expose dtbs_check and dt_binding_check in the make help - Convert writting-schema.md to ReST - HiSilicon reset controller binding updates - Add documentation for MT8516 RNG -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl2Dj38QHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw4qcEACE16/eR0h9FSnhN0QpyFlGrfUTy86K5Z4N IoJsGind4G7+TrNA6GGZwQkNRt3roWdrkqnLLvcted+8IVaXOFm0n12w2u0yoYvk C4pqxH2HRUC9U9eBjyDxdiplH9yYZPuy8bFwLPSQk0bkCd6D3I8iDe6qHm1arin3 sYIQ03jbZKowHixOuMNvu9rBiun79Lm5FfGUSi7EYab3KZ4Zt9HX1IiySRYVOWZT z6bjWbVfFe7HgbImwaB+WUYumUyNu5dh4AyqIidb9o6BB6ZENfnBNWPi0VDFuSGT 4wVc8XrcU3d7bt6Sstt+g3WZjn+JBMLNBkNnMjZ+nlp3OoR5F6Tf1RO6mrZtsENa sAspr18zNQK7CNBy0uKzBT32Z0oN1wXnsKRS5P1o5/8aEjRr0m8stxes3hOQhtuJ Y6rKLN9kGrQIeSY7nagWuGFaJ1uunGXCSgam+kb6YI8nDa3DUbzeIhYMIcqgz/Sx Gx2txPzKMHXgzF7Zc+5db9X3E7pg8Y1zrhk7o2oKiFVWrnwlEJivMcRHq9n3anOr RGAJPjrRfzwZNIQgYNflYHAdxVLyKKhpxEQDdo/5PXeMRYtghOH+rIxwoS31FHSs u/4nf0uHFQfkmSg7nSKicfSWt5ORR5G/H9cc83SRoix35kfPubirkawJ/tkcVuO4 3n0NeGERtA== =ZO6c -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - a bunch of DT binding conversions to DT schema format - clean-ups of the Arm idle-states binding - support a default number of cells in of_for_each_phandle() when the cells name is missing - expose dtbs_check and dt_binding_check in the make help - convert writting-schema.md to ReST - HiSilicon reset controller binding updates - add documentation for MT8516 RNG * tag 'devicetree-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (46 commits) of: restore old handling of cells_name=NULL in of_*_phandle_with_args() bus: qcom: fix spelling mistake "ambigous" -> "ambiguous" of: Let of_for_each_phandle fallback to non-negative cell_count iommu: pass cell_count = -1 to of_for_each_phandle with cells_name dt-bindings: arm: Convert Realtek board/soc bindings to json-schema dt-bindings: arm: Convert Actions Semi bindings to jsonschema dt-bindings: Correct spelling in example schema dt-bindings: cpu: Add a support cpu type for cortex-a55 dt-bindings: gpu: mali-midgard: Add samsung exynos5250 compatible dt-bindings: arm: idle-states: Move exit-latency-us explanation dt-bindings: arm: idle-states: Add punctuation to improve readability dt-bindings: arm: idle-states: Correct "constraint guarantees" dt-bindings: arm: idle-states: Correct references to wake-up delay dt-bindings: arm: idle-states: Use "e.g." and "i.e." consistently pinctrl-mcp23s08: Fix property-name in dt-example dt-bindings: Clarify interrupts-extended usage dt-bindings: Convert Arm Mali Utgard GPU to DT schema dt-bindings: Convert Arm Mali Bifrost GPU to DT schema dt-bindings: Convert Arm Mali Midgard GPU to DT schema dt-bindings: irq: Convert Allwinner NMI Controller to a schema ... |
|
|
Linus Torvalds
|
6cfae0c26b |
Char/Misc driver patches for 5.4-rc1
Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIT1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9lwCgrHZlMMvfYNVm6GQ5ge58JJsVTL4AoNatTcL4
hfVMA6pCHWBjV65xVSf6
=Tijw
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
habanalabs: correctly cast variable to __le32
habanalabs: show correct id in error print
habanalabs: stop using the acronym KMD
habanalabs: display card name as sensors header
habanalabs: add uapi to retrieve aggregate H/W events
habanalabs: add uapi to retrieve device utilization
habanalabs: Make the Coresight timestamp perpetual
habanalabs: explicitly set the queue-id enumerated numbers
habanalabs: print to kernel log when reset is finished
habanalabs: replace __le32_to_cpu with le32_to_cpu
habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
habanalabs: Handle HW_IP_INFO if device disabled or in reset
habanalabs: Expose devices after initialization is done
habanalabs: improve security in Debug IOCTL
habanalabs: use default structure for user input in Debug IOCTL
habanalabs: Add descriptive name to PSOC app status register
habanalabs: Add descriptive names to PSOC scratch-pad registers
habanalabs: create two char devices per ASIC
habanalabs: change device_setup_cdev() to be more generic
...
|
|
|
Linus Torvalds
|
4feaab05dc |
LED updates for 5.4-rc1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXYAIeQAKCRBiEGxRG/Sl
2/SzAQDEnoNxzV/R5kWFd+2kmFeY3cll0d99KMrWJ8om+kje6QD/cXxZHzFm+T1L
UPF66k76oOODV7cyndjXnTnRXbeCRAM=
=Szby
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
|
|
|
Chunfeng Yun
|
f9e55ac22c |
clk: mediatek: add pericfg clocks for MT8183
Add pericfg clocks for MT8183, it's used when support USB remote wakeup Cc: Weiyi Lu <weiyi.lu@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lkml.kernel.org/r/1566980533-28282-2-git-send-email-chunfeng.yun@mediatek.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Stefan Wahren
|
80766f8726 |
dt-bindings: bcm2835-cprman: Add bcm2711 support
The new BCM2711 supports an additional clock for the emmc2 block. So we need an additional compatible. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> |
|
|
Bibby Hsieh
|
8fedf805fa |
dt-binding: gce: add gce header file for mt8183
Add documentation for the mt8183 gce. Add gce header file defined the gce hardware event, subsys number and constant for mt8183. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
|
|
Linus Torvalds
|
cef7298262 |
ARM: DT updates for v5.4
This is another huge branch with close to 450 changessets related to
devicetree files, roughly half of this for 32-bit and 64-bit respectively.
There are lots of cleanups and additional hardware support for platforms
we already support based on SoCs from Renesas, ST-Microelectronics,
Intel/Altera, Rockchips, Allwinner, Broadcom and other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more
SoC will come in a follow-up branch. Most of the new boards are for
64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone platform,
usually paired with an external 5G modem. So far we only support the
Qualcomm SM8150 MTP reference platform, but no actual products.
For the slightly older Qualcomm platforms, support for several interesting
products is getting added: Three laptops based on Snapdragon 835/MSM8998
(Asus NovaGo, HP Envy X2 and Lenovo Miix 630), one laptop based on
Snapdragon 850/sdm850 (Lenovo Yoga C630) and several phones based on
the older Snapdragon 410/MSM8916 (Samsung A3 and A5, Longcheer L8150
aka Android One 2nd gen "seed" aka Wileyfox Swift).
Mediatek MT7629 is a new wireless network router chip, similar to
the older MT7623. It gets added together with the reference board
implementation.
Allwinner V3 is a repackaged version of the existing low-end V3s chip,
and is used in the tiny Lichee Pi Zero plus, also added here. There is
also a new TV set-top box based on Allwinner H6, the Tanix TX6, and the
eMMC variant of the Olimex A64-Olinuxino development board.
NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC family,
similar to the i.MX8M Mini. As usual, there is a large number of new
boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML, SolidRun Hummingboard
Pulse baseboard and System-on-Module, Boundary Devices i.MX8MQ Nitrogen8M,
and TechNexion PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit,
we get the Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
Innovations i.MX7 RMU2 board.
In a different NXP product line, the Layerscape LS1046A "Freeway"
reference board gets added.
Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from their
set-top-box line and smart speaker with newer CPU and GPU cores compared
to their predecessors. Both are now also supported by the Khadas VIM3
development board series, and the dts files for that get reorganized a
bit to better deal with all variants. Another board based on SM1 that
gets added is the SEI Robotics SEI610.
There are a handful of new x86 and Power9 server boards using Aspeed BMC
chips that are gaining support for running Linux on the BMC through the
OpenBMC project: Facebook Minipack/Wedge100/Wedge40, Lenovo Hr855xg2,
and Mihawk. Notably these are still new machines using SoCs based on
the ARM9 and ARM11 CPU cores, as support for the new Cortex-A7 based
AST2600 is still ramping up.
There are three new end-user products using 32-bit Rockchips SoCs:
Mecer Xtreme Mini S6 is an Android "mini PC" box based on the low-end
RK3229 chip, while the two AOpen products Chromebox Mini (Fievel) and
Chromebase Mini (Tiger) run ChromeOS and are meant for commercial settings
(digital signage, PoS, ...).
One more single-board computer based on the popular 64-bit RK3399 is
added: the Leez RK3399 P710.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Bm5T
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"This is another huge branch with close to 450 changessets related to
devicetree files, roughly half of this for 32-bit and 64-bit
respectively. There are lots of cleanups and additional hardware
support for platforms we already support based on SoCs from Renesas,
ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more
SoC will come in a follow-up branch. Most of the new boards are for
64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
- The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
platform, usually paired with an external 5G modem. So far we only
support the Qualcomm SM8150 MTP reference platform, but no actual
products.
- For the slightly older Qualcomm platforms, support for several
interesting products is getting added: Three laptops based on
Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
and several phones based on the older Snapdragon 410/MSM8916
(Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
aka Wileyfox Swift).
- Mediatek MT7629 is a new wireless network router chip, similar to
the older MT7623. It gets added together with the reference board
implementation.
- Allwinner V3 is a repackaged version of the existing low-end V3s
chip, and is used in the tiny Lichee Pi Zero plus, also added here.
There is also a new TV set-top box based on Allwinner H6, the Tanix
TX6, and the eMMC variant of the Olimex A64-Olinuxino development
board.
- NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
family, similar to the i.MX8M Mini. As usual, there is a large
number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
SolidRun Hummingboard Pulse baseboard and System-on-Module,
Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
Innovations i.MX7 RMU2 board.
- In a different NXP product line, the Layerscape LS1046A "Freeway"
reference board gets added.
- Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
their set-top-box line and smart speaker with newer CPU and GPU
cores compared to their predecessors. Both are now also supported
by the Khadas VIM3 development board series, and the dts files for
that get reorganized a bit to better deal with all variants.
Another board based on SM1 that gets added is the SEI Robotics
SEI610.
- There are a handful of new x86 and Power9 server boards using
Aspeed BMC chips that are gaining support for running Linux on the
BMC through the OpenBMC project: Facebook
Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
these are still new machines using SoCs based on the ARM9 and ARM11
CPU cores, as support for the new Cortex-A7 based AST2600 is still
ramping up.
- There are three new end-user products using 32-bit Rockchips SoCs:
Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
low-end RK3229 chip, while the two AOpen products Chromebox Mini
(Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
commercial settings(digital signage, PoS, ...).
- One more single-board computer based on the popular 64-bit RK3399
is added: the Leez RK3399 P710"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
arm64: dts: qcom: Add Lenovo Yoga C630
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
ARM; dts: aspeed: mihawk: File should not be executable
ARM: dts: aspeed: swift: Change power supplies to version 2
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed-g4: Add all flash chips
ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
ARM: dts: exynos: Remove not accurate secondary ADC compatible
arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
arm64: dts: meson-sm1-sei610: add stdout-path property back
arm64: dts: meson-sm1-sei610: enable DVFS
arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
arm64: dts: meson: g12a: add reset to tdm formatters
...
|
|
|
Linus Torvalds
|
399eb9b6cb |
ARM: SoC driver updates for v5.4
The branch contains driver changes that are tightly
connected to SoC specific code. Aside from smaller
cleanups and bug fixes, here is a list of the notable
changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver
for its on-board pluggable extension bus. The
same platform also gains a firmware driver.
- The Samsung Exynos family gains a new Chipid driver
exporting using the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon
chips.
- A firmware driver for the NXP i.MX DSP IPC protocol
using shared memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the
NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for
the S905X3 and A311D chips
- A rework of the TI Davinci framebuffer driver to
allow important cleanups in the platform code
- A couple of device drivers for removed ARM SoC
platforms are removed. Most of the removals were
picked up by other maintainers, this contains
whatever was left.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lxFi
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This contains driver changes that are tightly connected to SoC
specific code. Aside from smaller cleanups and bug fixes, here is a
list of the notable changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver for its
on-board pluggable extension bus. The same platform also gains a
firmware driver.
- The Samsung Exynos family gains a new Chipid driver exporting using
the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon chips.
- A firmware driver for the NXP i.MX DSP IPC protocol using shared
memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for the S905X3 and A311D
chips
- A rework of the TI Davinci framebuffer driver to allow important
cleanups in the platform code
- A couple of device drivers for removed ARM SoC platforms are
removed. Most of the removals were picked up by other maintainers,
this contains whatever was left"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
bus: uniphier-system-bus: use devm_platform_ioremap_resource()
soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
firmware: ti_sci: Allow for device shared and exclusive requests
bus: imx-weim: remove incorrect __init annotations
fbdev: remove w90x900/nuc900 platform drivers
spi: remove w90x900 driver
net: remove w90p910-ether driver
net: remove ks8695 driver
firmware: turris-mox-rwtm: Add sysfs documentation
firmware: Add Turris Mox rWTM firmware driver
dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
bus: moxtet: fix unsigned comparison to less than zero
bus: moxtet: remove set but not used variable 'dummy'
ARM: scoop: Use the right include
dt-bindings: power: add Amlogic Everything-Else power domains bindings
soc: amlogic: Add support for Everything-Else power domains controller
fbdev: da8xx: use resource management for dma
fbdev: da8xx-fb: drop a redundant if
fbdev: da8xx-fb: use devm_platform_ioremap_resource()
...
|
|
|
Linus Torvalds
|
52a5525214 |
IOMMU Updates for Linux v5.4:
Including: - Batched unmap support for the IOMMU-API - Support for unlocked command queueing in the ARM-SMMU driver - Rework the ATS support in the ARM-SMMU driver - More refactoring in the ARM-SMMU driver to support hardware implemention specific quirks and errata - Bounce buffering DMA-API implementatation in the Intel VT-d driver for untrusted devices (like Thunderbolt devices) - Fixes for runtime PM support in the OMAP iommu driver - MT8183 IOMMU support in the Mediatek IOMMU driver - Rework of the way the IOMMU core sets the default domain type for groups. Changing the default domain type on x86 does not require two kernel parameters anymore. - More smaller fixes and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl1/pdoACgkQK/BELZcB GuMvCw/+K1GPyyZbPWAuXcnclraSZTHXS1lV0yilBXXyT2omFRQpRJYZGN/8NTbE SqD2FtzTKGuGSy2jA0drd3RcMKK/zZsFYnJShiM3FHLXatZdaFrnkK7vRHuzKlHf dvOlH7gHKtjIPPXodUEb0xd/oRAEIVsKjJyq1fBMARPPAluhU7mIFUI/xbGvX17g LM00hIxEhVNsSPemU2kTVISNBPVneecNVLlKXySjp0YPW/+sf8R7tTvwlSXX6h3I JM6wOU479O8mBvIcpAjfZlanHCHtqLk0ybaPx666DjdgYx6cUBHbDCF0P57XnGJA HNeVGtBwGQb8VWgbPLJKrStSOzYudDG8ndctqfKYN7uiPDjYM2/sqXcwQSVXR9vX AjT2s0GFEWT/AJhgBSeg9PJilEX1hPtomGKcQhKfR0wRGycixeZJFbwToQqzJrZN 7XoORbZPH1S5W6sjXsXH3eVPW3EGnKipulJSPGDqFLa2aIUG+PXuu/A+iJS6sADh mqzVfcEs3/NYsro40eA/iQc0t99ftJXgpX18KxYprjyL6VWcwC/xeHcT/Zw9abxz r7dYDGTR0z6RIew0GOaeZVdZJh/J6yraKCNDS0ARZgol6JPaU7HGHhh6Ohdmmu8L Gtsgdxp4NeLEgp4mQiRvvpQ5pPJ/YR+oCOx3v+PPnKRLhMTxymQ= =UF08 -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - batched unmap support for the IOMMU-API - support for unlocked command queueing in the ARM-SMMU driver - rework the ATS support in the ARM-SMMU driver - more refactoring in the ARM-SMMU driver to support hardware implemention specific quirks and errata - bounce buffering DMA-API implementatation in the Intel VT-d driver for untrusted devices (like Thunderbolt devices) - fixes for runtime PM support in the OMAP iommu driver - MT8183 IOMMU support in the Mediatek IOMMU driver - rework of the way the IOMMU core sets the default domain type for groups. Changing the default domain type on x86 does not require two kernel parameters anymore. - more smaller fixes and cleanups * tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (113 commits) iommu/vt-d: Declare Broadwell igfx dmar support snafu iommu/vt-d: Add Scalable Mode fault information iommu/vt-d: Use bounce buffer for untrusted devices iommu/vt-d: Add trace events for device dma map/unmap iommu/vt-d: Don't switch off swiotlb if bounce page is used iommu/vt-d: Check whether device requires bounce buffer swiotlb: Split size parameter to map/unmap APIs iommu/omap: Mark pm functions __maybe_unused iommu/ipmmu-vmsa: Disable cache snoop transactions on R-Car Gen3 iommu/ipmmu-vmsa: Move IMTTBCR_SL0_TWOBIT_* to restore sort order iommu: Don't use sme_active() in generic code iommu/arm-smmu-v3: Fix build error without CONFIG_PCI_ATS iommu/qcom: Use struct_size() helper iommu: Remove wrong default domain comments iommu/dma: Fix for dereferencing before null checking iommu/mediatek: Clean up struct mtk_smi_iommu memory: mtk-smi: Get rid of need_larbid iommu/mediatek: Fix VLD_PA_RNG register backup when suspend memory: mtk-smi: Add bus_sel for mt8183 memory: mtk-smi: Invoke pm runtime_callback to enable clocks ... |
|
|
Arnd Bergmann
|
375a7baddb |
Merge branch 'aspeed/dt-3' into arm/late
* aspeed/dt-3: ARM: dts: aspeed: Add AST2600 pinmux nodes ARM: dts: aspeed: Add AST2600 and EVB clk: Add support for AST2600 SoC clk: aspeed: Move structures to header clk: aspeed: Add SDIO gate |
|
|
mtk01761
|
85b18fe704 |
clk: mediatek: Add dt-bindings for MT6779 clocks
Add MT6779 clock dt-bindings, include topckgen, apmixedsys, infracfg, and subsystem clocks. Signed-off-by: mtk01761 <wendell.lin@mediatek.com> Link: https://lkml.kernel.org/r/1566206502-4347-10-git-send-email-mars.cheng@mediatek.com Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Artur Rojek
|
b23bf21f55 |
dt-bindings: iio/adc: Add AUX2 channel idx for JZ4770 SoC ADC
Introduce support for AUX2 channel found in ADC hardware present on Ingenic JZ4770 SoC. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> |
|
|
Joel Stanley
|
d3d04f6c33 |
clk: Add support for AST2600 SoC
The ast2600 is a new BMC SoC from ASPEED. It contains many more clocks than the previous iterations, so support is broken out into it's own driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/20190825141848.17346-3-joel@jms.id.au [sboyd@kernel.org: Mark arrays const] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |