Commit Graph

41508 Commits

Author SHA1 Message Date
Ilya Dryomov 89f081730c libceph: use sizeof_footer() more
Don't open-code sizeof_footer() in read_partial_message() and
ceph_msg_revoke().  Also, after switching to sizeof_footer(), it's now
possible to use con_out_kvec_add() in prepare_write_message_footer().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2016-03-25 18:51:53 +01:00
Yan, Zheng 2c63f49a72 libceph: add helper that duplicates last extent operation
This helper duplicates last extent operation in OSD request, then
adjusts the new extent operation's offset and length. The helper
is for scatterd page writeback, which adds nonconsecutive dirty
pages to single OSD request.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:43 +01:00
Ilya Dryomov 3f1af42ad0 libceph: enable large, variable-sized OSD requests
Turn r_ops into a flexible array member to enable large, consisting of
up to 16 ops, OSD requests.  The use case is scattered writeback in
cephfs and, as far as the kernel client is concerned, 16 is just a made
up number.

r_ops had size 3 for copyup+hint+write, but copyup is really a special
case - it can only happen once.  ceph_osd_request_cache is therefore
stuffed with num_ops=2 requests, anything bigger than that is allocated
with kmalloc().  req_mempool is backed by ceph_osd_request_cache, which
means either num_ops=1 or num_ops=2 for use_mempool=true - all existing
users (ceph_writepages_start(), ceph_osdc_writepages()) are fine with
that.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:43 +01:00
Ilya Dryomov 9e767adbd3 libceph: osdc->req_mempool should be backed by a slab pool
ceph_osd_request_cache was introduced a long time ago.  Also, osd_req
is about to get a flexible array member, which ceph_osd_request_cache
is going to be aware of.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:43 +01:00
Ilya Dryomov ae458f5a17 libceph: make r_request msg_size calculation clearer
Although msg_size is calculated correctly, the terms are grouped in
a misleading way - snaps appears to not have room for a u32 length.
Move calculation closer to its use and regroup terms.

No functional change.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:42 +01:00
Yan, Zheng 7665d85b73 libceph: move r_reply_op_{len,result} into struct ceph_osd_req_op
This avoids defining large array of r_reply_op_{len,result} in
in struct ceph_osd_request.

Signed-off-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:42 +01:00
Ilya Dryomov de2aa102ea libceph: rename ceph_osd_req_op::payload_len to indata_len
Follow userspace nomenclature on this - the next commit adds
outdata_len.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:41 +01:00
Ilya Dryomov b5d91704f5 libceph: behave in mon_fault() if cur_mon < 0
This can happen if __close_session() in ceph_monc_stop() races with
a connection reset.  We need to ignore such faults, otherwise it's
likely we would take !hunting, call __schedule_delayed() and end up
with delayed_work() executing on invalid memory, among other things.

The (two!) con->private tests are useless, as nothing ever clears
con->private.  Nuke them.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:40 +01:00
Ilya Dryomov bee3a37c47 libceph: reschedule tick in mon_fault()
Doing __schedule_delayed() in the hunting branch is pointless, as the
tick will have already been scheduled by then.

What we need to do instead is *reschedule* it in the !hunting branch,
after reopen_session() changes hunt_mult, which affects the delay.
This helps with spacing out connection attempts and avoiding things
like two back-to-back attempts followed by a longer period of waiting
around.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:40 +01:00
Ilya Dryomov 1752b50ca2 libceph: introduce and switch to reopen_session()
hunting is now set in __open_session() and cleared in finish_hunting(),
instead of all around.  The "session lost" message is printed not only
on connection resets, but also on keepalive timeouts.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:39 +01:00
Ilya Dryomov 168b9090c7 libceph: monc hunt rate is 3s with backoff up to 30s
Unless we are in the process of setting up a client (i.e. connecting to
the monitor cluster for the first time), apply a backoff: every time we
want to reopen a session, increase our timeout by a multiple (currently
2); when we complete the connection, reduce that multipler by 50%.

Mirrors ceph.git commit 794c86fd289bd62a35ed14368fa096c46736e9a2.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:39 +01:00
Ilya Dryomov 58d81b1294 libceph: monc ping rate is 10s
Split ping interval and ping timeout: ping interval is 10s; keepalive
timeout is 30s.

Make monc_ping_timeout a constant while at it - it's not actually
exported as a mount option (and the rest of tick-related settings won't
be either), so it's got no place in ceph_options.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:39 +01:00
Ilya Dryomov 0e04dc26cc libceph: pick a different monitor when reconnecting
Don't try to reconnect to the same monitor when we fail to establish
a session within a timeout or it's lost.

For that, pick_new_mon() needs to see the old value of cur_mon, so
don't clear it in __close_session() - all calls to __close_session()
but one are followed by __open_session() anyway.  __open_session() is
only called when a new session needs to be established, so the "already
open?" branch, which is now in the way, is simply dropped.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:38 +01:00
Ilya Dryomov 82dcabad75 libceph: revamp subs code, switch to SUBSCRIBE2 protocol
It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime".  To better
handle full clusters/pools in the osd_client, we need to be able to
issue continuous osdmap subs.  Revamp subs code to allow us to specify
for each sub whether it should be continuous or not.

Although not strictly required for the above, switch to SUBSCRIBE2
protocol while at it, eliminating the ambiguity between a request for
"every map since X" and a request for "just the latest" when we don't
have a map yet (i.e. have epoch 0).  SUBSCRIBE2 feature bit is now
required - it's been supported since pre-argonaut (2010).

Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling
in before we validate the epoch and successfully install the new map
can mess up mon_client sub state.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:38 +01:00
Ilya Dryomov 0f9af169a1 libceph: decouple hunting and subs management
Coupling hunting state with subscribe state is not a good idea.  Clear
hunting when we complete the authentication handshake.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:38 +01:00
Ilya Dryomov 02ac956c42 libceph: move debugfs initialization into __ceph_open_session()
Our debugfs dir name is a concatenation of cluster fsid and client
unique ID ("global_id").  It used to be the case that we learned
global_id first, nowadays we always learn fsid first - the monmap is
sent before any auth replies are.  ceph_debugfs_client_init() call in
ceph_monc_handle_map() is therefore never executed and can be removed.

Its counterpart in handle_auth_reply() doesn't really belong there
either: having to do monc->client and unlocking early to work around
lockdep is a testament to that.  Move it into __ceph_open_session(),
where it can be called unconditionally.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:37 +01:00
Bjorn Helgaas 543e3a8da5 netpoll: Fix extra refcount release in netpoll_cleanup()
netpoll_setup() does a dev_hold() on np->dev, the netpoll device.  If it
fails, it correctly does a dev_put() but leaves np->dev set.  If we call
netpoll_cleanup() after the failure, np->dev is still set so we do another
dev_put(), which decrements the refcount an extra time.

It's questionable to call netpoll_cleanup() after netpoll_setup() fails,
but it can be difficult to find the problem, and we can easily avoid it in
this case.  The extra decrements can lead to hangs like this:

  unregister_netdevice: waiting for bond0 to become free. Usage count = -3

Set and clear np->dev at the points where we dev_hold() and dev_put() the
device.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-25 11:23:14 -04:00
Nicolas Dichtel 3e34766048 switchdev: fix typo in comments/doc
Two minor typo.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-24 14:51:24 -04:00
subashab@codeaurora.org 071d36bf21 xfrm: Fix crash observed during device unregistration and decryption
A crash is observed when a decrypted packet is processed in receive
path. get_rps_cpus() tries to dereference the skb->dev fields but it
appears that the device is freed from the poison pattern.

[<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0
[<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc
[<ffffffc000af6094>] netif_rx+0x74/0x94
[<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0
[<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c
[<ffffffc000ba6eb8>] esp_input_done+0x20/0x30
[<ffffffc0000b64c8>] process_one_work+0x244/0x3fc
[<ffffffc0000b7324>] worker_thread+0x2f8/0x418
[<ffffffc0000bb40c>] kthread+0xe0/0xec

-013|get_rps_cpu(
     |    dev = 0xFFFFFFC08B688000,
     |    skb = 0xFFFFFFC0C76AAC00 -> (
     |      dev = 0xFFFFFFC08B688000 -> (
     |        name =
"......................................................
     |        name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev =
0xAAAAAAAAAAA

Following are the sequence of events observed -

- Encrypted packet in receive path from netdevice is queued
- Encrypted packet queued for decryption (asynchronous)
- Netdevice brought down and freed
- Packet is decrypted and returned through callback in esp_input_done
- Packet is queued again for process in network stack using netif_rx

Since the device appears to have been freed, the dereference of
skb->dev in get_rps_cpus() leads to an unhandled page fault
exception.

Fix this by holding on to device reference when queueing packets
asynchronously and releasing the reference on call back return.

v2: Make the change generic to xfrm as mentioned by Steffen and
update the title to xfrm

Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jerome Stanislaus <jeromes@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-24 14:29:36 -04:00
Linus Torvalds 5b1e167d8d Various bugfixes, a RDMA update from Chuck Lever, and support for a new
pnfs layout type from Christoph Hellwig.  The new layout type is a
 variant of the block layout which uses SCSI features to offer improved
 fencing and device identification.
 
 (Also: note this pull request also includes the client side of SCSI
 layout, with Trond's permission.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW8+uhAAoJECebzXlCjuG+26YP/35DP4MPfszEJ5G0dYq5HMwl
 dJUni8ajSHRswZ/2FqiBsRwmg3Djfc+uoXdOneD1f6ogkDe7S16yp+FRyh8/VwUs
 Ym6LcxSjT28uqkxO0MblcnUl0G9nNSuOwqIsZ0HG7/UC7E6RmCF4o3r5fFUfOsA+
 B3koB5UcHNAFythAk+GDwOQ46Fr96VkZ7Y+OhdNAwmeXZIdKXIufweueI/o2uipB
 RoJFJ7lqrzAjFe+CqAUBr2l2k6lEKzdxbEH6HXQ5+cvVNwfVIgnrONpF78uF/p9T
 NNDnZ+fn3YdRhd+W9RxUHZq7ZL5YOEA8kHsAlloeBH74GqCy7IcS+DrKt1ReM3px
 bhgsXM3dqqJ9xiDGqmeE4VQwRF30SxgYZbO386E+cLHnCYV+vfY6RUaWPrk6On/r
 FL9g3iyVvhyC4HO06Xm+uvvERw8R+fTZY9KZQKH2RL0Tr5DkWRRNJfasMO+PwGOv
 Fdku01vyoA4Y6mbqUgQ9DmrbLO4gK3UyMiOTanQV9shrIDxI0MOuLK03zL25vZCM
 s1A4YBpXmg4gx3XsOFM+tygv6EVujDu6scICeb+hj0vi0oG82Lx7T9e3MJEiYC+T
 jbi8bu+x+0bX2obMprvDNVUzi/PgSUVpGCnRlbRTaXBa0lB6nV7uUiQ1HC9gGesm
 ZWWiOv7du+7WlFP5c6r5
 =mY8w
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "Various bugfixes, a RDMA update from Chuck Lever, and support for a
  new pnfs layout type from Christoph Hellwig.  The new layout type is a
  variant of the block layout which uses SCSI features to offer improved
  fencing and device identification.

  (Also: note this pull request also includes the client side of SCSI
  layout, with Trond's permission.)"

* tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux:
  sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
  nfsd: recover: fix memory leak
  nfsd: fix deadlock secinfo+readdir compound
  nfsd4: resfh unused in nfsd4_secinfo
  svcrdma: Use new CQ API for RPC-over-RDMA server send CQs
  svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs
  svcrdma: Remove close_out exit path
  svcrdma: Hook up the logic to return ERR_CHUNK
  svcrdma: Use correct XID in error replies
  svcrdma: Make RDMA_ERROR messages work
  rpcrdma: Add RPCRDMA_HDRLEN_ERR
  svcrdma: svc_rdma_post_recv() should close connection on error
  svcrdma: Close connection when a send error occurs
  nfsd: Lower NFSv4.1 callback message size limit
  svcrdma: Do not send Write chunk XDR pad with inline content
  svcrdma: Do not write xdr_buf::tail in a Write chunk
  svcrdma: Find client-provided write and reply chunks once per reply
  nfsd: Update NFS server comments related to RDMA support
  nfsd: Fix a memory leak when meeting unsupported state_protect_how4
  nfsd4: fix bad bounds checking
2016-03-24 10:41:00 -07:00
Linus Torvalds aca04ce5db Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking bugfixes from David Miller:
 "Several bug fixes rolling in, some for changes introduced in this
  merge window, and some for problems that have existed for some time:

  1) Fix prepare_to_wait() handling in AF_VSOCK, from Claudio Imbrenda.

  2) The new DST_CACHE should be a silent config option, from Dave
     Jones.

  3) inet_current_timestamp() unintentionally truncates timestamps to
     16-bit, from Deepa Dinamani.

  4) Missing reference to netns in ppp, from Guillaume Nault.

  5) Free memory reference in hv_netvsc driver, from Haiyang Zhang.

  6) Missing kernel doc documentation for function arguments in various
     spots around the networking, from Luis de Bethencourt.

  7) UDP stopped receiving broadcast packets properly, due to
     overzealous multicast checks, fix from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  net: ping: make ping_v6_sendmsg static
  hv_netvsc: Fix the order of num_sc_offered decrement
  net: Fix typos and whitespace.
  hv_netvsc: Fix the array sizes to be max supported channels
  hv_netvsc: Fix accessing freed memory in netvsc_change_mtu()
  ppp: take reference on channels netns
  net: Reset encap_level to avoid resetting features on inner IP headers
  net: mediatek: fix checking for NULL instead of IS_ERR() in .probe
  net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY
  at803x: fix reset handling
  AF_VSOCK: Shrink the area influenced by prepare_to_wait
  Revert "vsock: Fix blocking ops call in prepare_to_wait"
  macb: fix PHY reset
  ipv4: initialize flowi4_flags before calling fib_lookup()
  fsl/fman: Workaround for Errata A-007273
  ipv4: fix broadcast packets reception
  net: hns: bug fix about the overflow of mss
  net: hns: adds limitation for debug port mtu
  net: hns: fix the bug about mtu setting
  net: hns: fixes a bug of RSS
  ...
2016-03-23 23:25:14 -07:00
Haishuang Yan 6579a023a8 net: ping: make ping_v6_sendmsg static
As ping_v6_sendmsg is used only in this file,
making it static

The body of "pingv6_prot" and "pingv6_protosw" were
moved at the middle of the file, to avoid having to
declare some static prototypes.

Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 22:09:58 -04:00
Alexander Duyck 5197f3499c net: Reset encap_level to avoid resetting features on inner IP headers
This patch corrects an oversight in which we were allowing the encap_level
value to pass from the outer headers to the inner headers.  As a result we
were incorrectly identifying UDP or GRE tunnels as also making use of ipip
or sit when the second header actually represented a tunnel encapsulated in
either a UDP or GRE tunnel which already had the features masked.

Fixes: 7644345622 ("net: Move GSO csum into SKB_GSO_CB")
Reported-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-23 14:19:08 -04:00
Linus Torvalds a24e3d414e Merge branch 'akpm' (patches from Andrew)
Merge third patch-bomb from Andrew Morton:

 - more ocfs2 changes

 - a few hotfixes

 - Andy's compat cleanups

 - misc fixes to fatfs, ptrace, coredump, cpumask, creds, eventfd,
   panic, ipmi, kgdb, profile, kfifo, ubsan, etc.

 - many rapidio updates: fixes, new drivers.

 - kcov: kernel code coverage feature.  Like gcov, but not
   "prohibitively expensive".

 - extable code consolidation for various archs

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (81 commits)
  ia64/extable: use generic search and sort routines
  x86/extable: use generic search and sort routines
  s390/extable: use generic search and sort routines
  alpha/extable: use generic search and sort routines
  kernel/...: convert pr_warning to pr_warn
  drivers: dma-coherent: use memset_io for DMA_MEMORY_IO mappings
  drivers: dma-coherent: use MEMREMAP_WC for DMA_MEMORY_MAP
  memremap: add MEMREMAP_WC flag
  memremap: don't modify flags
  kernel/signal.c: add compile-time check for __ARCH_SI_PREAMBLE_SIZE
  mm/mprotect.c: don't imply PROT_EXEC on non-exec fs
  ipc/sem: make semctl setting sempid consistent
  ubsan: fix tree-wide -Wmaybe-uninitialized false positives
  kfifo: fix sparse complaints
  scripts/gdb: account for changes in module data structure
  scripts/gdb: add cmdline reader command
  scripts/gdb: add version command
  kernel: add kcov code coverage
  profile: hide unused functions when !CONFIG_PROC_FS
  hpwdt: use nmi_panic() when kernel panics in NMI handler
  ...
2016-03-22 17:09:14 -07:00
Linus Torvalds b8ba452683 Round two of 4.6 merge window patches
- A few minor core fixups needed for the next patch series
 - The IB SRIOV series.  This has bounced around for several versions.
   Of note is the fact that the first patch in this series effects
   the net core.  It was directed to netdev and DaveM for each iteration
   of the series (three versions total).  Dave did not object, but did
   not respond either.  I've taken this as permission to move forward
   with the series.
 - The new Intel X722 iWARP driver
 - A huge set of updates to the Intel hfi1 driver.  Of particular interest
   here is that we have left the driver in staging since it still has an
   API that people object to.  Intel is working on a fix, but getting
   these patches in now helps keep me sane as the upstream and Intel's
   trees were over 300 patches apart.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW8HR9AAoJELgmozMOVy/dDYMP+wSBALhIdV/pqVzdLCGfIUbK
 H5agonm/3b/Oj74W30w2JYqXBFfZC2LGVJy6OwocJ3wK04v/KfZbA9G+QsOuh2hQ
 Db+tFn1eoltvzrcx3k/a7x6zHGC4YyxyH9OX2B3QfRsNHeE7PG9KGp5dfEs2OH1r
 WGp3jMLAsHf7o8uKpa0jyTEUEErATaTlG+YoaJ+BGHwurgCNy8ni+wAn+EAFiJ3w
 iEJhcXB6KY69vkLsrLYuT9xxJn4udFJ3QEk8xdPkpLKsu+6Ue5i/eNQ19VfbpZgR
 c6fTc8genfIv5S+fis+0P44u1oA7Kl2JT6IZYLi35gJ60ZmxTD+7GruWP3xX/wJ2
 zuR3sTj5fjcFWenk087RSIU/EK87ONPD4g9QPdZpf3FtgleTVKk3YDlqwjqf8pgv
 cO6gQ1BcOBnixJvhjNFiX1c2hvNhb3CkgObly1JBwhcCzZhLkV7BNFPbZuDHAeAx
 VqzNEUse4hupkgiiuiGgudcJ4fsSxMW37kyfX9QC/qyk6YVuUDbrekcWI+MAKot7
 5e5dHqFExpbn1Zgvc8yfvh88H2MUQAgaYwjanWF/qpppOPRd01nTisVQIOJn7s5C
 arcWzvocpQe0GL2UsvDoWwAABXznL3bnnAoCyTWOES2RhOOcw0Ibw46Jl8FQ8gnl
 2IRxQ+ltNEscb2cwi5wE
 =t2Ko
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull more rdma updates from Doug Ledford:
 "Round two of 4.6 merge window patches.

  This is a monster pull request.  I held off on the hfi1 driver updates
  (the hfi1 driver is intimately tied to the qib driver and the new
  rdmavt software library that was created to help both of them) in my
  first pull request.  The hfi1/qib/rdmavt update is probably 90% of
  this pull request.  The hfi1 driver is being left in staging so that
  it can be fixed up in regards to the API that Al and yourself didn't
  like.  Intel has agreed to do the work, but in the meantime, this
  clears out 300+ patches in the backlog queue and brings my tree and
  their tree closer to sync.

  This also includes about 10 patches to the core and a few to mlx5 to
  create an infrastructure for configuring SRIOV ports on IB devices.
  That series includes one patch to the net core that we sent to netdev@
  and Dave Miller with each of the three revisions to the series.  We
  didn't get any response to the patch, so we took that as implicit
  approval.

  Finally, this series includes Intel's new iWARP driver for their x722
  cards.  It's not nearly the beast as the hfi1 driver.  It also has a
  linux-next merge issue, but that has been resolved and it now passes
  just fine.

  Summary:

   - A few minor core fixups needed for the next patch series

   - The IB SRIOV series.  This has bounced around for several versions.
     Of note is the fact that the first patch in this series effects the
     net core.  It was directed to netdev and DaveM for each iteration
     of the series (three versions total).  Dave did not object, but did
     not respond either.  I've taken this as permission to move forward
     with the series.

   - The new Intel X722 iWARP driver

   - A huge set of updates to the Intel hfi1 driver.  Of particular
     interest here is that we have left the driver in staging since it
     still has an API that people object to.  Intel is working on a fix,
     but getting these patches in now helps keep me sane as the upstream
     and Intel's trees were over 300 patches apart"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (362 commits)
  IB/ipoib: Allow mcast packets from other VFs
  IB/mlx5: Implement callbacks for manipulating VFs
  net/mlx5_core: Implement modify HCA vport command
  net/mlx5_core: Add VF param when querying vport counter
  IB/ipoib: Add ndo operations for configuring VFs
  IB/core: Add interfaces to control VF attributes
  IB/core: Support accessing SA in virtualized environment
  IB/core: Add subnet prefix to port info
  IB/mlx5: Fix decision on using MAD_IFC
  net/core: Add support for configuring VF GUIDs
  IB/{core, ulp} Support above 32 possible device capability flags
  IB/core: Replace setting the zero values in ib_uverbs_ex_query_device
  net/mlx5_core: Introduce offload arithmetic hardware capabilities
  net/mlx5_core: Refactor device capability function
  net/mlx5_core: Fix caching ATOMIC endian mode capability
  ib_srpt: fix a WARN_ON() message
  i40iw: Replace the obsolete crypto hash interface with shash
  IB/hfi1: Add SDMA cache eviction algorithm
  IB/hfi1: Switch to using the pin query function
  IB/hfi1: Specify mm when releasing pages
  ...
2016-03-22 15:48:44 -07:00
Andy Lutomirski 2bf8c47626 net/xfrm_user: use in_compat_syscall to deny compat syscalls
The code wants to prevent compat code from receiving messages.  Use
in_compat_syscall for this.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Andy Lutomirski 96c0e0a908 net/sctp: use in_compat_syscall for sctp_getsockopt_connectx3
SCTP unfortunately has a different ABI for SCTP_SOCKOPT_CONNECTX3 for
32-bit and 64-bit callers.  Use in_compat_syscall to correctly
distinguish them on all architectures.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Claudio Imbrenda f7f9b5e7f8 AF_VSOCK: Shrink the area influenced by prepare_to_wait
When a thread is prepared for waiting by calling prepare_to_wait, sleeping
is not allowed until either the wait has taken place or finish_wait has
been called.  The existing code in af_vsock imposed unnecessary no-sleep
assumptions to a broad list of backend functions.
This patch shrinks the influence of prepare_to_wait to the area where it
is strictly needed, therefore relaxing the no-sleep restriction there.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-22 16:18:41 -04:00
Claudio Imbrenda 6f57e56a15 Revert "vsock: Fix blocking ops call in prepare_to_wait"
This reverts commit 5988818008 ("vsock: Fix
blocking ops call in prepare_to_wait")

The commit reverted with this patch caused us to potentially miss wakeups.
Since the condition is not checked between the prepare_to_wait and the
schedule(), if a wakeup happens after the condition is checked but before
the sleep happens, we will miss it. ( A description of the problem can be
found here: http://www.makelinux.net/ldd3/chp-6-sect-2 ).

By reverting the patch, the behaviour is still incorrect (since we
shouldn't sleep between the prepare_to_wait and the schedule) but at least
it will not miss wakeups.

The next patch in the series actually fixes the behaviour.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-22 16:18:41 -04:00
Linus Torvalds 01cde1538e NFS client updates for Linux 4.6
Highlights include:
 
 Features:
 - Add support for multiple NFSv4.1 callbacks in flight
 - Initial patchset for RPC multipath support
 - Adapt RPC/RDMA to use the new completion queue API
 
 Bugfixes and cleanups:
 - nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
 - Cleanups to remove nfs_inode_dio_wait and nfs4_file_fsync
 - Fix RPC/RDMA credit accounting
 - Properly handle RDMA_ERROR replies
 - xprtrdma: Do not wait if ib_post_send() fails
 - xprtrdma: Segment head and tail XDR buffers on page boundaries
 - xprtrdma cleanups for dprintk, physical_op_map and unused macros
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW8Y7MAAoJEGcL54qWCgDyMsMP+we8JSgfVqI5X1lKpU9aPWkI
 D912ybtV58Kv0elKwYvQMqm+mRvdMNz1hZNJa4sAEaPVBOGfFjyZLy3xlDlr0HTf
 M+Juh0FNLTcUh1obxJamjsbpNxfg4b6f/Z29KWRzahv/MlpMJVS3hLjpAEzCcTYr
 WfOOovV6mragtsBINegGl/6jk/x2D22JDnKcTU+8ltVZGJtZe+HoqTFhUOrLO5qm
 wR3YO22fbOuiZxCPoST06kMNiksYnYXnOju8RwlKwFYq3bWke0jWstQtIC4vKs6K
 4u5o74aTBL5zMkJPnJuIfN2if4LJPptSr1n7pItbv3MLmgY1mWjE6N2BATpijfhQ
 p+Gt/GHTAvswuWrmwySZKLj/Q8EkBuw4ohPFwLQ9eFHl2USoV3G9KQw7H0odR4d1
 IyQPCag+suN2lWBreFkPIV48dZyeCVk6JmJmy3SN+d0L1t3jd6gwSO2UBgG7S2Gd
 qVbdxYRiU/zYP6E5wFouLhIc1beSfe4vnJqvnuWZrIId+haTE2+OLi7772WGIkSe
 xoZVTg7AX4Wu79ZyWoH+e9FnDvEsRkRVv7HQfpsMq2gynBWj70/KemEoeZnjqWaB
 UOWcH8/vNLrnwlXTh0VHG6I8t3s0EXgqQB4//tYRLI42oIj35W2pIMnjYt52DeVB
 Mo5mbYghtR9bgeoRQ6V4
 =kC3t
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Features:
   - Add support for multiple NFSv4.1 callbacks in flight
   - Initial patchset for RPC multipath support
   - Adapt RPC/RDMA to use the new completion queue API

  Bugfixes and cleanups:
   - nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
   - Cleanups to remove nfs_inode_dio_wait and nfs4_file_fsync
   - Fix RPC/RDMA credit accounting
   - Properly handle RDMA_ERROR replies
   - xprtrdma: Do not wait if ib_post_send() fails
   - xprtrdma: Segment head and tail XDR buffers on page boundaries
   - xprtrdma cleanups for dprintk, physical_op_map and unused macros"

* tag 'nfs-for-4.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (35 commits)
  nfs/blocklayout: make sure making a aligned read request
  nfs4: nfs4_ff_layout_prepare_ds should return NULL if connection failed
  nfs: remove nfs_inode_dio_wait
  nfs: remove nfs4_file_fsync
  xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
  xprtrdma: Use an anonymous union in struct rpcrdma_mw
  xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
  xprtrdma: Serialize credit accounting again
  xprtrdma: Properly handle RDMA_ERROR replies
  rpcrdma: Add RPCRDMA_HDRLEN_ERR
  xprtrdma: Do not wait if ib_post_send() fails
  xprtrdma: Segment head and tail XDR buffers on page boundaries
  xprtrdma: Clean up dprintk format string containing a newline
  xprtrdma: Clean up physical_op_map()
  xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
  NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback
  pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3
  SUNRPC: Allow addition of new transports to a struct rpc_clnt
  NFSv4.1: nfs4_proc_bind_conn_to_session must iterate over all connections
  SUNRPC: Make NFS swap work with multipath
  ...
2016-03-22 13:16:21 -07:00
Lance Richardson 4cfc86f3da ipv4: initialize flowi4_flags before calling fib_lookup()
Field fl4.flowi4_flags is not initialized in fib_compute_spec_dst()
before calling fib_lookup(), which means fib_table_lookup() is
using non-deterministic data at this line:

	if (!(flp->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF)) {

Fix by initializing the entire fl4 structure, which will prevent
similar issues as fields are added in the future by ensuring that
all fields are initialized to zero unless explicitly initialized
to another value.

Fixes: 58189ca7b2 ("net: Fix vti use case with oif in dst lookups")
Suggested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-22 15:59:23 -04:00
Paolo Abeni ad0ea1989c ipv4: fix broadcast packets reception
Currently, ingress ipv4 broadcast datagrams are dropped since,
in udp_v4_early_demux(), ip_check_mc_rcu() is invoked even on
bcast packets.

This patch addresses the issue, invoking ip_check_mc_rcu()
only for mcast packets.

Fixes: 6e54030932 ("ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-22 15:53:50 -04:00
David Decotigny 025c68186e netlink: add support for NIC driver ioctls
By returning -ENOIOCTLCMD, sock_do_ioctl() falls back to calling
dev_ioctl(), which provides support for NIC driver ioctls, which
includes ethtool support. This is similar to the way ioctls are handled
in udp.c or tcp.c.

This removes the requirement that ethtool for example be tied to the
support of a specific L3 protocol (ethtool uses an AF_INET socket
today).

Signed-off-by: David Decotigny <decot@googlers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-22 15:45:44 -04:00
Deepa Dinamani 3ba9d300c9 net: ipv4: Fix truncated timestamp returned by inet_current_timestamp()
The millisecond timestamps returned by the function is
converted to network byte order by making a call to htons().
htons() only returns __be16 while __be32 is required here.

This was identified by the sparse warning from the buildbot:
net/ipv4/af_inet.c:1405:16: sparse: incorrect type in return
			    expression (different base types)
net/ipv4/af_inet.c:1405:16: expected restricted __be32
net/ipv4/af_inet.c:1405:16: got restricted __be16 [usertype] <noident>

Change the function to use htonl() to return the correct __be32 type
instead so that the millisecond value doesn't get truncated.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 822c868532 ("net: ipv4: Convert IP network timestamps to be y2038 safe")
Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot]
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21 22:56:38 -04:00
Dave Jones 9b246841f4 Make DST_CACHE a silent config option
commit 911362c70d ("net: add dst_cache support") added a new
kconfig option that gets selected by other networking options.
It seems the intent wasn't to offer this as a user-selectable
option given the lack of help text, so this patch converts it
to a silent option.

Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21 22:56:38 -04:00
Eli Cohen cc8e27cc97 net/core: Add support for configuring VF GUIDs
Add two new NLAs to support configuration of Infiniband node or port
GUIDs. New applications can choose to use this interface to configure
GUIDs with iproute2 with commands such as:

ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78

A new ndo, ndo_sef_vf_guid is introduced to notify the net device of the
request to change the GUID.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-21 16:34:06 -04:00
Eric Dumazet ae74f10068 bridge: update max_gso_segs and max_gso_size
It can be useful to lower max_gso_segs on NIC with very low
number of TX descriptors like bcmgenet.

However, this is defeated by bridge since it does not propagate
the lower value of max_gso_segs and max_gso_size.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petri Gynther <pgynther@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21 13:35:56 -04:00
Eric Dumazet c70ce028e8 net/rtnetlink: add IFLA_GSO_MAX_SEGS and IFLA_GSO_MAX_SIZE attributes
It can be useful to report dev->gso_max_segs and dev->gso_max_size
so that "ip -d link" can display them to help debugging.

For the moment, these attributes are read-only.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petri Gynther <pgynther@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21 13:35:56 -04:00
Luis de Bethencourt ed49e65037 net: add description for len argument of dev_get_phys_port_name
When the function dev_get_phys_port_name was added it missed a description
for it's len argument. Adding it.

Fixes: db24a9044e ("net: add support for phys_port_name")
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21 13:28:31 -04:00
Linus Torvalds 643ad15d47 Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 protection key support from Ingo Molnar:
 "This tree adds support for a new memory protection hardware feature
  that is available in upcoming Intel CPUs: 'protection keys' (pkeys).

  There's a background article at LWN.net:

      https://lwn.net/Articles/643797/

  The gist is that protection keys allow the encoding of
  user-controllable permission masks in the pte.  So instead of having a
  fixed protection mask in the pte (which needs a system call to change
  and works on a per page basis), the user can map a (handful of)
  protection mask variants and can change the masks runtime relatively
  cheaply, without having to change every single page in the affected
  virtual memory range.

  This allows the dynamic switching of the protection bits of large
  amounts of virtual memory, via user-space instructions.  It also
  allows more precise control of MMU permission bits: for example the
  executable bit is separate from the read bit (see more about that
  below).

  This tree adds the MM infrastructure and low level x86 glue needed for
  that, plus it adds a high level API to make use of protection keys -
  if a user-space application calls:

        mmap(..., PROT_EXEC);

  or

        mprotect(ptr, sz, PROT_EXEC);

  (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
  this special case, and will set a special protection key on this
  memory range.  It also sets the appropriate bits in the Protection
  Keys User Rights (PKRU) register so that the memory becomes unreadable
  and unwritable.

  So using protection keys the kernel is able to implement 'true'
  PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
  PROT_READ as well.  Unreadable executable mappings have security
  advantages: they cannot be read via information leaks to figure out
  ASLR details, nor can they be scanned for ROP gadgets - and they
  cannot be used by exploits for data purposes either.

  We know about no user-space code that relies on pure PROT_EXEC
  mappings today, but binary loaders could start making use of this new
  feature to map binaries and libraries in a more secure fashion.

  There is other pending pkeys work that offers more high level system
  call APIs to manage protection keys - but those are not part of this
  pull request.

  Right now there's a Kconfig that controls this feature
  (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
  (like most x86 CPU feature enablement code that has no runtime
  overhead), but it's not user-configurable at the moment.  If there's
  any serious problem with this then we can make it configurable and/or
  flip the default"

* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
  mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
  x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
  mm/core, x86/mm/pkeys: Add execute-only protection keys support
  x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
  x86/mm/pkeys: Allow kernel to modify user pkey rights register
  x86/fpu: Allow setting of XSAVE state
  x86/mm: Factor out LDT init from context init
  mm/core, x86/mm/pkeys: Add arch_validate_pkey()
  mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
  x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
  x86/mm/pkeys: Add Kconfig prompt to existing config option
  x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
  x86/mm/pkeys: Dump PKRU with other kernel registers
  mm/core, x86/mm/pkeys: Differentiate instruction fetches
  x86/mm/pkeys: Optimize fault handling in access_error()
  mm/core: Do not enforce PKEY permissions on remote mm access
  um, pkeys: Add UML arch_*_access_permitted() methods
  mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
  x86/mm/gup: Simplify get_user_pages() PTE bit handling
  ...
2016-03-20 19:08:56 -07:00
Luis de Bethencourt e9fc2f052c net: sched: Add description for cpu_bstats argument
Commit 22e0f8b932 ("net: sched: make bstats per cpu and estimator RCU safe")
added the argument cpu_bstats to functions gen_new_estimator and
gen_replace_estimator and now the descriptions of these are missing for the
documentation. Adding them.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:48:07 -04:00
Luis de Bethencourt b002fdcc89 gen_stats.c: Add description for cpu argument
Function gnet_stats_copy_basic is missing the description of the cpu
argument in the documentation. Adding it.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:48:06 -04:00
Jesse Gross a09a4c8dd1 tunnels: Remove encapsulation offloads on decap.
If a packet is either locally encapsulated or processed through GRO
it is marked with the offloads that it requires. However, when it is
decapsulated these tunnel offload indications are not removed. This
means that if we receive an encapsulated TCP packet, aggregate it with
GRO, decapsulate, and retransmit the resulting frame on a NIC that does
not support encapsulation, we won't be able to take advantage of hardware
offloads even though it is just a simple TCP packet at this point.

This fixes the problem by stripping off encapsulation offload indications
when packets are decapsulated.

The performance impacts of this bug are significant. In a test where a
Geneve encapsulated TCP stream is sent to a hypervisor, GRO'ed, decapsulated,
and bridged to a VM performance is improved by 60% (5Gbps->8Gbps) as a
result of avoiding unnecessary segmentation at the VM tap interface.

Reported-by: Ramu Ramamurthy <sramamur@linux.vnet.ibm.com>
Fixes: 68c33163 ("v4 GRE: Add TCP segmentation offload for GRE")
Signed-off-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:33:40 -04:00
Jesse Gross fac8e0f579 tunnels: Don't apply GRO to multiple layers of encapsulation.
When drivers express support for TSO of encapsulated packets, they
only mean that they can do it for one layer of encapsulation.
Supporting additional levels would mean updating, at a minimum,
more IP length fields and they are unaware of this.

No encapsulation device expresses support for handling offloaded
encapsulated packets, so we won't generate these types of frames
in the transmit path. However, GRO doesn't have a check for
multiple levels of encapsulation and will attempt to build them.

UDP tunnel GRO actually does prevent this situation but it only
handles multiple UDP tunnels stacked on top of each other. This
generalizes that solution to prevent any kind of tunnel stacking
that would cause problems.

Fixes: bf5a755f ("net-gre-gro: Add GRE support to the GRO stack")
Signed-off-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:33:40 -04:00
Jesse Gross b8cba75bdf ipip: Properly mark ipip GRO packets as encapsulated.
ipip encapsulated packets can be merged together by GRO but the result
does not have the proper GSO type set or even marked as being
encapsulated at all. Later retransmission of these packets will likely
fail if the device does not support ipip offloads. This is similar to
the issue resolved in IPv6 sit in feec0cb3
("ipv6: gro: support sit protocol").

Reported-by: Patrick Boutilier <boutilpj@ednet.ns.ca>
Fixes: 9667e9bb ("ipip: Add gro callbacks to ipip offload")
Tested-by: Patrick Boutilier <boutilpj@ednet.ns.ca>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:33:39 -04:00
Marcelo Ricardo Leitner 3822a5ff4b sctp: align MTU to a word
SCTP is a protocol that is aligned to a word (4 bytes). Thus using bare
MTU can sometimes return values that are not aligned, like for loopback,
which is 65536 but ipv4_mtu() limits that to 65535. This mis-alignment
will cause the last non-aligned bytes to never be used and can cause
issues with congestion control.

So it's better to just consider a lower MTU and keep congestion control
calcs saner as they are based on PMTU.

Same applies to icmp frag needed messages, which is also fixed by this
patch.

One other effect of this is the inability to send MTU-sized packet
without queueing or fragmentation and without hitting Nagle. As the
check performed at sctp_packet_can_append_data():

if (chunk->skb->len + q->out_qlen >= transport->pathmtu - packet->overhead)
	/* Enough data queued to fill a packet */
	return SCTP_XMIT_OK;

with the above example of MTU, if there are no other messages queued,
one cannot send a packet that just fits one packet (65532 bytes) and
without causing DATA chunk fragmentation or a delay.

v2:
 - Added WORD_TRUNC macro

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:31:12 -04:00
Marcelo Ricardo Leitner 31b055ef0c sctp: do not leak chunks that are sent to unconfirmed paths
Currently, if a chunk is scheduled to be sent through a transport that
is currently unconfirmed, it will be leaked as it is dequeued from outq
and is not re-queued nor freed.

As I'm not aware of any situation that may lead to this situation, I'm
fixing this by freeing the chunk and also logging a trace so that we can
fix the other bug if it ever happens.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:31:12 -04:00
Marcelo Ricardo Leitner 07b4d6a174 sctp: do not update a_rwnd if we are not issuing a sack
The SACK can be lost pretty much elsewhere, but if its allocation fail,
we know we are not sending it, so it is better to revert a_rwnd to its
previous value as this may give it a chance to issue a window update
later.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:31:11 -04:00
Eric Dumazet abbdb5a74c net: remove a dubious unlikely() clause
TCP protocol is still used these days, and TCP uses
clones in its transmit path. We can not optimize linux
stack assuming it is mostly used in routers, or that TCP
is dead.

Fixes: 795bb1c00d ("net: bulk free infrastructure for NAPI context, use napi_consume_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20 16:24:07 -04:00
David S. Miller c78a85a843 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux 2016-03-19 21:05:24 -04:00
Linus Torvalds 1200b6809d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...
2016-03-19 10:05:34 -07:00
Linus Torvalds 814a2bf957 Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:

 - a couple of hotfixes

 - the rest of MM

 - a new timer slack control in procfs

 - a couple of procfs fixes

 - a few misc things

 - some printk tweaks

 - lib/ updates, notably to radix-tree.

 - add my and Nick Piggin's old userspace radix-tree test harness to
   tools/testing/radix-tree/.  Matthew said it was a godsend during the
   radix-tree work he did.

 - a few code-size improvements, switching to __always_inline where gcc
   screwed up.

 - partially implement character sets in sscanf

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  sscanf: implement basic character sets
  lib/bug.c: use common WARN helper
  param: convert some "on"/"off" users to strtobool
  lib: add "on"/"off" support to kstrtobool
  lib: update single-char callers of strtobool()
  lib: move strtobool() to kstrtobool()
  include/linux/unaligned: force inlining of byteswap operations
  include/uapi/linux/byteorder, swab: force inlining of some byteswap operations
  include/asm-generic/atomic-long.h: force inlining of some atomic_long operations
  usb: common: convert to use match_string() helper
  ide: hpt366: convert to use match_string() helper
  ata: hpt366: convert to use match_string() helper
  power: ab8500: convert to use match_string() helper
  power: charger_manager: convert to use match_string() helper
  drm/edid: convert to use match_string() helper
  pinctrl: convert to use match_string() helper
  device property: convert to use match_string() helper
  lib/string: introduce match_string() helper
  radix-tree tests: add test for radix_tree_iter_next
  radix-tree tests: add regression3 test
  ...
2016-03-18 19:26:54 -07:00
Sowmini Varadhan a3382e408b RDS: TCP: Remove unused constant
RDS_TCP_DEFAULT_BUFSIZE has been unused since commit 1edd6a14d2
("RDS-TCP: Do not bloat sndbuf/rcvbuf in rds_tcp_tune").

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 22:25:41 -04:00
Sowmini Varadhan c6a58ffed5 RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
Add per-net sysctl tunables to set the size of sndbuf and
rcvbuf on the kernel tcp socket.

The tunables are added at /proc/sys/net/rds/tcp/rds_tcp_sndbuf
and /proc/sys/net/rds/tcp/rds_tcp_rcvbuf.

These values must be set before accept() or connect(),
and there may be an arbitrary number of existing rds-tcp
sockets when the tunable is modified. To make sure that all
connections in the netns pick up the same value for the tunable,
we reset existing rds-tcp connections in the netns, so that
they can reconnect with the new parameters.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 22:25:41 -04:00
Daniel Borkmann fca5fdf67d ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
eBPF defines this as BPF_TUNLEN_MAX and OVS just uses the hard-coded
value inside struct sw_flow_key. Thus, add and use IP_TUNNEL_OPTS_MAX
for this, which makes the code a bit more generic and allows to remove
BPF_TUNLEN_MAX from eBPF code.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 19:38:46 -04:00
Daniel Borkmann 808c1b697c bpf, dst: add and use dst_tclassid helper
We can just add a small helper dst_tclassid() for retrieving the
dst->tclassid value. It makes the code a bit better in that we can
get rid of the ifdef from filter.c by moving this into the header.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 19:38:46 -04:00
Daniel Borkmann 09c37a2c5b bpf: make skb->tc_classid also readable
Currently, the tc_classid from eBPF skb context is write-only, but there's
no good reason for tc programs to limit it to write-only. For example,
it can be used to transfer its state via tail calls where the resulting
tc_classid gets filled gradually.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 19:38:46 -04:00
Daniel Borkmann 3a461da1d0 cls_bpf: reset class and reuse major in da
There are two issues with the current code. First one is that we need
to set res->class to 0 in case we use non-default classid matching.

This is important for the case where cls_bpf was initially set up with
an optional binding to a default class with tcf_bind_filter(), where
the underlying qdisc implements bind_tcf() that fills res->class and
tests for it later on when doing the classification. Convention for
these cases is that after tc_classify() was called, such qdiscs (atm,
drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup
based on classid.

Second, there's a bug with da mode, where res->classid is only assigned
a 16 bit minor, but it needs to expand to the full 32 bit major/minor
combination instead, therefore we need to expand with the bound major.
This is fine as classes belonging to a classful qdisc must share the
same major.

Fixes: 045efa82ff ("cls_bpf: introduce integrated actions")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 19:35:21 -04:00
Simon Horman fe3a5f6c79 openvswitch: allow output of MPLS packets on tunnel vports
Currently output of MPLS packets on tunnel vports is not allowed by Open
vSwitch. This is because historically encapsulation was done in such a way
that the inner_protocol field of the skb needed to hold the inner protocol
for both MPLS and tunnel encapsulation in order for GSO segmentation to be
performed correctly.

Since b2acd1dc39 ("openvswitch: Use regular GRE net_device instead of
vport") Open vSwitch makes use of lwt to output to tunnel netdevs which
perform encapsulation. As no drivers expose support for MPLS offloads this
means that GSO packets are segmented in software by validate_xmit_skb(),
which is called from __dev_queue_xmit(), before tunnel encapsulation occurs.
This means that the inner protocol of MPLS is no longer needed by the time
encapsulation occurs and the contention on the inner_protocol field of the
skb no longer occurs.

Thus it is now safe to output MPLS to tunnel vports.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 18:26:38 -04:00
Wu Fengguang e014e84685 ovs: internal_set_rx_headroom() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 17:50:36 -04:00
Wu Fengguang b73f96fcb4 net: dst_cache_per_cpu_dst_set() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18 17:45:08 -04:00
Linus Torvalds 9ea4463520 Initial roundup of 4.6 merge window patches
- cxgb4 updates
 - nes updates
 - unification of iwarp portmapper code to core
 - add drain_cq API
 - various ib_core updates
 - minor ipoib updates
 - minor mlx4 updates
 - more significant mlx5 updates (including a minor merge conflict with
   net-next tree...merge is simple to resolve and Stephen's resolution was
   confirmed by Mellanox)
 - trivial net/9p rdma conversion
 - ocrdma RoCEv2 update
 - srpt updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW6aTEAAoJELgmozMOVy/dlAEQAKgT0VwBi6Zd4PihP2UQgsfH
 LUmbGhCzBpcao1eJ7piOOEYQGSb3slN3Cnup4qBJak+y2mhtErxNkLOIhGRrvcHk
 XCym7N9uAhp4j++OnUBp6Cpr0hZNmBEBKm6nKqdEcdaxLaVa0ezdcxAOkVlHhZ77
 NnhTHvPy8pu4kC8NZCvCIJK+fqW+5Xj+ojAcVKGPV+Y3zf9lfaDCXCSdD2m6+dFX
 /KV3V/CNUSdYTWrPZSIDhqoYix2AGl5Fg17mfsgBWQB/T405fiwZkd0FEXkqXDkR
 bOhS5PnuCN+ScwsxMDHCbzqtaOb06sKttg9IE3s0qdFpOwGtbyoU+lLUh1qbjKLP
 vtEiySZq2Mhlr41ajuUuDSgNbqCTL7+52/HUf8qcjFFiSBlZRaTO8rVJ5tABKRiW
 SkxkHbR6orx8okKtaWRskKRtYSNkA2uexdIQ/wzc4fJVqzqJUh6Elcxp3dPq/KSN
 lkrYXNJ5X4ux72QfHRobBX1pBjT0P2+avoFri3763k9ZrsWwY9tXgDUB/OdX11IF
 gAadgUNw2pHgY10jqCZBOw22F+foB2qx8ZkaNSGYE0h3uQrp+iiCnfeU9rWNCWVv
 MelRGpfGa7VF3RTDojc7Dq7JpWRUChMx9BY+XrQPmV08Z+JGoVuRT20Q7twgillz
 Yb3aGRKZNtqYehj9fM4n
 =kTkT
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma updates from Doug Ledford:
 "Initial roundup of 4.6 merge window patches.

  This is the first of two pull requests.  It is the smaller request,
  but touches for more different things (this is everything but what is
  in or going into staging).  The pull request for the code in
  staging/rdma is on hold until after we decide what to do on the
  write/writev API issue and may be partially deferred until 4.7 as a
  result.

  Summary:

   - cxgb4 updates
   - nes updates
   - unification of iwarp portmapper code to core
   - add drain_cq API
   - various ib_core updates
   - minor ipoib updates
   - minor mlx4 updates
   - more significant mlx5 updates (including a minor merge conflict
     with net-next tree...merge is simple to resolve and Stephen's
     resolution was confirmed by Mellanox)
   - trivial net/9p rdma conversion
   - ocrdma RoCEv2 update
   - srpt updates"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (85 commits)
  iwpm: crash fix for large connections test
  iw_cxgb3: support for iWARP port mapping
  iw_cxgb4: remove port mapper related code
  iw_nes: remove port mapper related code
  iwcm: common code for port mapper
  net/9p: convert to new CQ API
  IB/mlx5: Add support for don't trap rules
  net/mlx5_core: Introduce forward to next priority action
  net/mlx5_core: Create anchor of last flow table
  iser: Accept arbitrary sg lists mapping if the device supports it
  mlx5: Add arbitrary sg list support
  IB/core: Add arbitrary sg_list support
  IB/mlx5: Expose correct max_fast_reg_page_list_len
  IB/mlx5: Make coding style more consistent
  IB/mlx5: Convert UMR CQ to new CQ API
  IB/ocrdma: Skip using unneeded intermediate variable
  IB/ocrdma: Skip using unneeded intermediate variable
  IB/ocrdma: Delete unnecessary variable initialisations in 11 functions
  IB/core: Documentation fix in the MAD header file
  IB/core: trivial prink cleanup.
  ...
2016-03-18 09:39:22 -07:00
Linus Torvalds 49dc2b7173 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  drivers/rtc: broken link fix
  drm/i915 Fix typos in i915_gem_fence.c
  Docs: fix missing word in REPORTING-BUGS
  lib+mm: fix few spelling mistakes
  MAINTAINERS: add git URL for APM driver
  treewide: Fix typo in printk
2016-03-17 21:38:27 -07:00
Eric Dumazet e316ea62e3 tcp/dccp: remove obsolete WARN_ON() in icmp handlers
Now SYN_RECV request sockets are installed in ehash table, an ICMP
handler can find a request socket while another cpu handles an incoming
packet transforming this SYN_RECV request socket into an ESTABLISHED
socket.

We need to remove the now obsolete WARN_ON(req->sk), since req->sk
is set when a new child is created and added into listener accept queue.

If this race happens, the ICMP will do nothing special.

Fixes: 079096f103 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ben Lazarus <blazarus@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-17 21:06:40 -04:00
Eric Dumazet f6773c5e95 vlan: propagate gso_max_segs
vlan drivers lack proper propagation of gso_max_segs from
lower device.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-17 21:05:01 -04:00
Joonsoo Kim fe896d1878 mm: introduce page reference manipulation functions
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count.  Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it.  Then, it is hard to find actual
reason of CMA allocation failure.  CMA allocation should be guaranteed
to succeed so finding offending place is really important.

In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function.  This is preparation step to
add tracepoint to each page reference manipulation function.  With this
facility, we can easily find reason of CMA allocation failure.  There is
no functional change in this patch.

In addition, this patch also converts reference read sites.  It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17 15:09:34 -07:00
Linus Torvalds 96b9b1c956 TTY/Serial patches for 4.6-rc1
Here's the big tty/serial driver pull request for 4.6-rc1.
 
 Lots of changes in here, Peter has been on a tear again, with lots of
 refactoring and bugs fixes, many thanks to the great work he has been
 doing.  Lots of driver updates and fixes as well, full details in the
 shortlog.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlbp8z8ACgkQMUfUDdst+ym1vwCgnOOCORaZyeQ4QrcxPAK5pHFn
 VrMAoNHvDgNYtG+Hmzv25Lgp3HnysPin
 =MLRG
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here's the big tty/serial driver pull request for 4.6-rc1.

  Lots of changes in here, Peter has been on a tear again, with lots of
  refactoring and bugs fixes, many thanks to the great work he has been
  doing.  Lots of driver updates and fixes as well, full details in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits)
  serial: 8250: describe CONFIG_SERIAL_8250_RSA
  serial: samsung: optimize UART rx fifo access routine
  serial: pl011: add mark/space parity support
  serial: sa1100: make sa1100_register_uart_fns a function
  tty: serial: 8250: add MOXA Smartio MUE boards support
  serial: 8250: convert drivers to use up_to_u8250p()
  serial: 8250/mediatek: fix building with SERIAL_8250=m
  serial: 8250/ingenic: fix building with SERIAL_8250=m
  serial: 8250/uniphier: fix modular build
  Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular"
  Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
  serial: mvebu-uart: initial support for Armada-3700 serial port
  serial: mctrl_gpio: Add missing module license
  serial: ifx6x60: avoid uninitialized variable use
  tty/serial: at91: fix bad offset for UART timeout register
  tty/serial: at91: restore dynamic driver binding
  serial: 8250: Add hardware dependency to RT288X option
  TTY, devpts: document pty count limiting
  tty: goldfish: support platform_device with id -1
  drivers: tty: goldfish: Add device tree bindings
  ...
2016-03-17 13:53:25 -07:00
NeilBrown a6ab1e8126 sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer
set.  In this case it aborts the queuing of the upcall.
However it has already taken a new counted reference on "h" and
doesn't "put" it, even though it frees the data structure holding the reference.

So let's delay the "cache_get" until we know we need it.

Fixes: f9e1aedc6c ("sunrpc/cache: remove races with queuing an upcall.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-17 14:57:15 -04:00
Linus Torvalds 70477371dc Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 4.6:

  API:
   - Convert remaining crypto_hash users to shash or ahash, also convert
     blkcipher/ablkcipher users to skcipher.
   - Remove crypto_hash interface.
   - Remove crypto_pcomp interface.
   - Add crypto engine for async cipher drivers.
   - Add akcipher documentation.
   - Add skcipher documentation.

  Algorithms:
   - Rename crypto/crc32 to avoid name clash with lib/crc32.
   - Fix bug in keywrap where we zero the wrong pointer.

  Drivers:
   - Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver.
   - Add PIC32 hwrng driver.
   - Support BCM6368 in bcm63xx hwrng driver.
   - Pack structs for 32-bit compat users in qat.
   - Use crypto engine in omap-aes.
   - Add support for sama5d2x SoCs in atmel-sha.
   - Make atmel-sha available again.
   - Make sahara hashing available again.
   - Make ccp hashing available again.
   - Make sha1-mb available again.
   - Add support for multiple devices in ccp.
   - Improve DMA performance in caam.
   - Add hashing support to rockchip"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
  crypto: qat - remove redundant arbiter configuration
  crypto: ux500 - fix checks of error code returned by devm_ioremap_resource()
  crypto: atmel - fix checks of error code returned by devm_ioremap_resource()
  crypto: qat - Change the definition of icp_qat_uof_regtype
  hwrng: exynos - use __maybe_unused to hide pm functions
  crypto: ccp - Add abstraction for device-specific calls
  crypto: ccp - CCP versioning support
  crypto: ccp - Support for multiple CCPs
  crypto: ccp - Remove check for x86 family and model
  crypto: ccp - memset request context to zero during import
  lib/mpi: use "static inline" instead of "extern inline"
  lib/mpi: avoid assembler warning
  hwrng: bcm63xx - fix non device tree compatibility
  crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode.
  crypto: qat - The AE id should be less than the maximal AE number
  lib/mpi: Endianness fix
  crypto: rockchip - add hash support for crypto engine in rk3288
  crypto: xts - fix compile errors
  crypto: doc - add skcipher API documentation
  crypto: doc - update AEAD AD handling
  ...
2016-03-17 11:22:54 -07:00
Ben Hutchings 793cf87de9 ethtool: Set cmd field in ETHTOOL_GLINKSETTINGS response to wrong nwords
When the ETHTOOL_GLINKSETTINGS implementation finds that userland is
using the wrong number of words of link mode bitmaps (or is trying to
find out the right numbers) it sets the cmd field to 0 in the response
structure.

This is inconsistent with the implementation of every other ethtool
command, so let's remove that inconsistency before it gets into a
stable release.

Fixes: 3f1ac7a700 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16 19:26:04 -04:00
Nicholas Mc Guire 489ce5f441 sctp: consolidate local_bh_disable/enable + spin_lock/unlock to _bh variant
local_bh_disable() + spin_lock() is equivalent to spin_lock_bh(), same for
the unlock/enable case, so replace the calls by the appropriate wrappers.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16 19:20:50 -04:00
Trond Myklebust 1425075e72 NFS: NFSoRDMA Client Side Changes
These patches include several bugfixes and cleanups for the NFSoRDMA client.
 This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
 from the recent workqueue swicchover.  These patches also switch xprtrdma to
 use the new CQ API
 
 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJW5wl+AAoJENfLVL+wpUDrH7sP/i3lZ7n6Pr+Flrb/Z+ywjmEA
 mvZ0u3O3eviFxDqr82J/WL7fgDUGbBd9urtUu5xZGscc0HNs3LQ8izm6Dy3gmrVF
 MFh69jNGL5djmfymYMWRbdoKLuOw4V70EBtGnYqH7Bh7gwpiIl3EiVcBBJup/vKV
 rgvx6NnSGYpYPYpBFC4Ql4qZx7m5j4cxsThRScbu7wMMjDknls+7ZDM1B5mGO00+
 1vYObpYGXOXovGZyHAHspQityWp6jvUcEMnJzWbMUFDqxkOmmGK3t54MfvRXZiFE
 vUkgg5nGxhMejEIfMywuf6czKGfXc4HZT2yF9eSZeA4IW+7QkeeXeCcIANBDY6Ga
 oKXu4fgM6T7SnCpefwkXRhinwtEM04tGAlxo1X3UcKrMz7Q3di3/NtgaWijfL8gy
 9Nd1lt2kqI375h7+OZccURl33lnQBSjO4F2pt/pFk6wYwGh0F8co9bIp6QIEVQ0f
 N2l8KU9vgLofhrD9JzZeu1l3+TCdDU9YaJLSjbkZ71BTjNtkNdUcd9Tk+bMSxept
 mq7mNKe1oBHAGgR8+7zYBUKEt85rdpNovPoU+Hz/QKbV3zikGSPmL3e9gpEvhmH4
 MKD7Vs61Fi8volfv7wHmzZF8Tk68qc1MAZXSbgzVQxwF/uBjqEuSO+n4Kii/gfkG
 MJjlzqmqlO01O1fn2XHu
 =aHja
 -----END PGP SIGNATURE-----

Merge tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma

NFS: NFSoRDMA Client Side Changes

These patches include several bugfixes and cleanups for the NFSoRDMA client.
This includes bugfixes for NFS v4.1, proper RDMA_ERROR handling, and fixes
from the recent workqueue swicchover.  These patches also switch xprtrdma to
use the new CQ API

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

* tag 'nfs-rdma-4.6-1' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (787 commits)
  xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
  xprtrdma: Use an anonymous union in struct rpcrdma_mw
  xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
  xprtrdma: Serialize credit accounting again
  xprtrdma: Properly handle RDMA_ERROR replies
  rpcrdma: Add RPCRDMA_HDRLEN_ERR
  xprtrdma: Do not wait if ib_post_send() fails
  xprtrdma: Segment head and tail XDR buffers on page boundaries
  xprtrdma: Clean up dprintk format string containing a newline
  xprtrdma: Clean up physical_op_map()
  xprtrdma: Clean up unused RPCRDMA_INLINE_PAD_THRESH macro
2016-03-16 16:25:09 -04:00
Peter Zijlstra 25528213fe tags: Fix DEFINE_PER_CPU expansions
$ make tags
  GEN     tags
ctags: Warning: drivers/acpi/processor_idle.c:64: null expansion of name pattern "\1"
ctags: Warning: drivers/xen/events/events_2l.c:41: null expansion of name pattern "\1"
ctags: Warning: kernel/locking/lockdep.c:151: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:133: null expansion of name pattern "\1"
ctags: Warning: kernel/rcu/rcutorture.c:135: null expansion of name pattern "\1"
ctags: Warning: kernel/workqueue.c:323: null expansion of name pattern "\1"
ctags: Warning: net/ipv4/syncookies.c:53: null expansion of name pattern "\1"
ctags: Warning: net/ipv6/syncookies.c:44: null expansion of name pattern "\1"
ctags: Warning: net/rds/page.c:45: null expansion of name pattern "\1"

Which are all the result of the DEFINE_PER_CPU pattern:

  scripts/tags.sh:200:	'/\<DEFINE_PER_CPU([^,]*, *\([[:alnum:]_]*\)/\1/v/'
  scripts/tags.sh:201:	'/\<DEFINE_PER_CPU_SHARED_ALIGNED([^,]*, *\([[:alnum:]_]*\)/\1/v/'

The below cures them. All except the workqueue one are within reasonable
distance of the 80 char limit. TJ do you have any preference on how to
fix the wq one, or shall we just not care its too long?

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
David S. Miller 1cdba55055 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS/OVS updates for net-next

The following patchset contains Netfilter/IPVS fixes and OVS NAT
support, more specifically this batch is composed of:

1) Fix a crash in ipset when performing a parallel flush/dump with
   set:list type, from Jozsef Kadlecsik.

2) Make sure NFACCT_FILTER_* netlink attributes are in place before
   accessing them, from Phil Turnbull.

3) Check return error code from ip_vs_fill_iph_skb_off() in IPVS SIP
   helper, from Arnd Bergmann.

4) Add workaround to IPVS to reschedule existing connections to new
   destination server by dropping the packet and wait for retransmission
   of TCP syn packet, from Julian Anastasov.

5) Allow connection rescheduling in IPVS when in CLOSE state, also
   from Julian.

6) Fix wrong offset of SIP Call-ID in IPVS helper, from Marco Angaroni.

7) Validate IPSET_ATTR_ETHER netlink attribute length, from Jozsef.

8) Check match/targetinfo netlink attribute size in nft_compat,
   patch from Florian Westphal.

9) Check for integer overflow on 32-bit systems in x_tables, from
   Florian Westphal.

Several patches from Jarno Rajahalme to prepare the introduction of
NAT support to OVS based on the Netfilter infrastructure:

10) Schedule IP_CT_NEW_REPLY definition for removal in
    nf_conntrack_common.h.

11) Simplify checksumming recalculation in nf_nat.

12) Add comments to the openvswitch conntrack code, from Jarno.

13) Update the CT state key only after successful nf_conntrack_in()
    invocation.

14) Find existing conntrack entry after upcall.

15) Handle NF_REPEAT case due to templates in nf_conntrack_in().

16) Call the conntrack helper functions once the conntrack has been
    confirmed.

17) And finally, add the NAT interface to OVS.

The batch closes with:

18) Cleanup to use spin_unlock_wait() instead of
    spin_lock()/spin_unlock(), from Nicholas Mc Guire.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 22:10:25 -04:00
Nicholas Mc Guire e39365be03 netfilter: nf_conntrack: consolidate lock/unlock into unlock_wait
The spin_lock()/spin_unlock() is synchronizing on the
nf_conntrack_locks_all_lock which is equivalent to
spin_unlock_wait() but the later should be more efficient.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-15 01:10:42 +01:00
Eric Dumazet acffb584cd net: diag: add a scheduling point in inet_diag_dump_icsk()
On loaded TCP servers, looking at millions of sockets can hold
cpu for many seconds, if the lookup condition is very narrow.

(eg : ss dst 1.2.3.4 )

Better add a cond_resched() to allow other processes to access
the cpu.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 19:38:09 -04:00
Jarno Rajahalme 05752523e5 openvswitch: Interface with NAT.
Extend OVS conntrack interface to cover NAT.  New nested
OVS_CT_ATTR_NAT attribute may be used to include NAT with a CT action.
A bare OVS_CT_ATTR_NAT only mangles existing and expected connections.
If OVS_NAT_ATTR_SRC or OVS_NAT_ATTR_DST is included within the nested
attributes, new (non-committed/non-confirmed) connections are mangled
according to the rest of the nested attributes.

The corresponding OVS userspace patch series includes test cases (in
tests/system-traffic.at) that also serve as example uses.

This work extends on a branch by Thomas Graf at
https://github.com/tgraf/ovs/tree/nat.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-14 23:47:29 +01:00
Jarno Rajahalme 28b6e0c1ac openvswitch: Delay conntrack helper call for new connections.
There is no need to help connections that are not confirmed, so we can
delay helping new connections to the time when they are confirmed.
This change is needed for NAT support, and having this as a separate
patch will make the following NAT patch a bit easier to review.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-14 23:47:29 +01:00
Jarno Rajahalme 5b6b929376 openvswitch: Handle NF_REPEAT in conntrack action.
Repeat the nf_conntrack_in() call when it returns NF_REPEAT.  This
avoids dropping a SYN packet re-opening an existing TCP connection.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-14 23:47:29 +01:00
Jarno Rajahalme 289f225349 openvswitch: Find existing conntrack entry after upcall.
Add a new function ovs_ct_find_existing() to find an existing
conntrack entry for which this packet was already applied to.  This is
only to be called when there is evidence that the packet was already
tracked and committed, but we lost the ct reference due to an
userspace upcall.

ovs_ct_find_existing() is called from skb_nfct_cached(), which can now
hide the fact that the ct reference may have been lost due to an
upcall.  This allows ovs_ct_commit() to be simplified.

This patch is needed by later "openvswitch: Interface with NAT" patch,
as we need to be able to pass the packet through NAT using the
original ct reference also after the reference is lost after an
upcall.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-14 23:47:28 +01:00
Jarno Rajahalme 394e910e90 openvswitch: Update the CT state key only after nf_conntrack_in().
Only a successful nf_conntrack_in() call can effect a connection state
change, so it suffices to update the key only after the
nf_conntrack_in() returns.

This change is needed for the later NAT patches.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-14 23:47:28 +01:00
Jarno Rajahalme 9f13ded8d3 openvswitch: Add commentary to conntrack.c
This makes the code easier to understand and the following patches
more focused.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-14 23:47:27 +01:00
Jarno Rajahalme 264619055b netfilter: Allow calling into nat helper without skb_dst.
NAT checksum recalculation code assumes existence of skb_dst, which
becomes a problem for a later patch in the series ("openvswitch:
Interface with NAT.").  Simplify this by removing the check on
skb_dst, as the checksum will be dealt with later in the stack.

Suggested-by: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-14 23:47:27 +01:00
Jarno Rajahalme bfa3f9d7f3 netfilter: Remove IP_CT_NEW_REPLY definition.
Remove the definition of IP_CT_NEW_REPLY from the kernel as it does
not make sense.  This allows the definition of IP_CT_NUMBER to be
simplified as well.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-14 23:47:27 +01:00
Vivien Didelot 6debb68a2d net: dsa: refine netdev event notifier
Rework the netdev event handler, similar to what the Mellanox Spectrum
driver does, to easily welcome more events later (for example
NETDEV_PRECHANGEUPPER) and use netdev helpers (such as
netif_is_bridge_master).

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 16:05:32 -04:00
Vivien Didelot 16bfa7024e net: dsa: make port_bridge_leave return void
netdev_upper_dev_unlink() which notifies NETDEV_CHANGEUPPER, returns
void, as well as del_nbp(). So there's no advantage to catch an eventual
error from the port_bridge_leave routine at the DSA level.

Make this routine void for the DSA layer and its existing drivers.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 16:05:31 -04:00
Vivien Didelot 71327a4e7d net: dsa: rename port_*_bridge routines
Rename DSA port_join_bridge and port_leave_bridge routines to
respectively port_bridge_join and port_bridge_leave in order to respect
an implicit Port::Bridge namespace.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 16:05:31 -04:00
Florian Westphal 8626c56c82 bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict
Zefir Kurtisi reported kernel panic with an openwrt specific patch.
However, it turns out that mainline has a similar bug waiting to happen.

Once NF_HOOK() returns the skb is in undefined state and must not be
used.   Moreover, the okfn must consume the skb to support async
processing (NF_QUEUE).

Current okfn in this spot doesn't consume it and caller assumes that
NF_HOOK return value tells us if skb was freed or not, but thats wrong.

It "works" because no in-tree user registers a NFPROTO_BRIDGE hook at
LOCAL_IN that returns STOLEN or NF_QUEUE verdicts.

Once we add NF_QUEUE support for nftables bridge this will break --
NF_QUEUE holds the skb for async processing, caller will erronoulsy
return RX_HANDLER_PASS and on reinject netfilter will access free'd skb.

Fix this by pushing skb up the stack in the okfn instead.

NB: It also seems dubious to use LOCAL_IN while bypassing PRE_ROUTING
completely in this case but this is how its been forever so it seems
preferable to not change this.

Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 15:46:41 -04:00
David S. Miller 180a2c542c Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:

====================
pull request: bluetooth-next 2016-03-12

Here's the last bluetooth-next pull request for the 4.6 kernel.

 - New USB ID for AR3012 in btusb
 - New BCM2E55 ACPI ID
 - Buffer overflow fix for the Add Advertising command
 - Support for a new Bluetooth LE limited privacy mode
 - Fix for firmware activation in btmrvl_sdio
 - Cleanups to mac802154 & 6lowpan code

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 15:44:56 -04:00
Andrew Lunn 5bcbe0f35f phy: fixed: Fix removal of phys.
The fixed phys delete function simply removed the fixed phy from the
internal linked list and freed the memory. It however did not
unregister the associated phy device. This meant it was still possible
to find the phy device on the mdio bus.

Make fixed_phy_del() an internal function and add a
fixed_phy_unregister() to unregisters the phy device and then uses
fixed_phy_del() to free resources.

Modify DSA to use this new API function, so we don't leak phys.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 15:43:11 -04:00
Andrew Lunn ec777e6b42 dsa: dsa: Fix freeing of fixed-phys from user ports.
All ports types can have a fixed PHY associated with it. Remove the
check which limits removal to only CPU and DSA ports.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 15:43:11 -04:00
Andrew Lunn 3a44514ff9 dsa: Destroy fixed link phys after the phy has been disconnected
The phy is disconnected from the slave in dsa_slave_destroy(). Don't
destroy fixed link phys until after this, since there can be fixed
linked phys connected to ports.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 15:43:11 -04:00
Andrew Lunn b71be352f7 dsa: slave: Don't reference NULL pointer during phy_disconnect
When the phy is disconnected, the parent pointer to the netdev it was
attached to is set to NULL. The code then tries to suspend the phy,
but dsa_slave_fixed_link_update needs the parent pointer to determine
which switch the phy is connected to. So it dereferenced a NULL
pointer. Check for this condition.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 15:43:10 -04:00
Chuck Lever 2fa8f88d88 xprtrdma: Use new CQ API for RPC-over-RDMA client send CQs
Calling ib_poll_cq() to sort through WCs during a completion is a
common pattern amongst RDMA consumers. Since commit 14d3a3b249
("IB: add a proper completion queue abstraction"), WC sorting can
be handled by the IB core.

By converting to this new API, xprtrdma is made a better neighbor to
other RDMA consumers, as it allows the core to schedule the delivery
of completions more fairly amongst all active consumers.

Because each ib_cqe carries a pointer to a completion method, the
core can now post its own operations on a consumer's QP, and handle
the completions itself, without changes to the consumer.

Send completions were previously handled entirely in the completion
upcall handler (ie, deferring to a process context is unneeded).
Thus IB_POLL_SOFTIRQ is a direct replacement for the current
xprtrdma send code path.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:56:08 -04:00
Chuck Lever c882a655b7 xprtrdma: Use an anonymous union in struct rpcrdma_mw
Clean up: Make code more readable.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:56:06 -04:00
Chuck Lever 552bf22528 xprtrdma: Use new CQ API for RPC-over-RDMA client receive CQs
Calling ib_poll_cq() to sort through WCs during a completion is a
common pattern amongst RDMA consumers. Since commit 14d3a3b249
("IB: add a proper completion queue abstraction"), WC sorting can
be handled by the IB core.

By converting to this new API, xprtrdma is made a better neighbor to
other RDMA consumers, as it allows the core to schedule the delivery
of completions more fairly amongst all active consumers.

Because each ib_cqe carries a pointer to a completion method, the
core can now post its own operations on a consumer's QP, and handle
the completions itself, without changes to the consumer.

xprtrdma's reply processing is already handled in a work queue, but
there is some initial order-dependent processing that is done in the
soft IRQ context before a work item is scheduled.

IB_POLL_SOFTIRQ is a direct replacement for the current xprtrdma
receive code path.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:56:04 -04:00
Chuck Lever 23826c7aea xprtrdma: Serialize credit accounting again
Commit fe97b47cd6 ("xprtrdma: Use workqueue to process RPC/RDMA
replies") replaced the reply tasklet with a workqueue that allows
RPC replies to be processed in parallel. Thus the credit values in
RPC-over-RDMA replies can be applied in a different order than in
which the server sent them.

To fix this, revert commit eba8ff660b ("xprtrdma: Move credit
update to RPC reply handler"). Reverting is done by hand to
accommodate code changes that have occurred since then.

Fixes: fe97b47cd6 ("xprtrdma: Use workqueue to process . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:56:01 -04:00
Chuck Lever 59aa1f9a3c xprtrdma: Properly handle RDMA_ERROR replies
These are shorter than RPCRDMA_HDRLEN_MIN, and they need to
complete the waiting RPC.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:55:59 -04:00
Chuck Lever b892a699ce xprtrdma: Do not wait if ib_post_send() fails
If ib_post_send() in ro_unmap_sync() fails, the WRs have not been
posted, no completions will fire, and wait_for_completion() will
wait forever. Skip the wait in that case.

To ensure the MRs are invalid, disconnect.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:55:55 -04:00
Chuck Lever 821c791a0b xprtrdma: Segment head and tail XDR buffers on page boundaries
A single memory allocation is used for the pair of buffers wherein
the RPC client builds an RPC call message and decodes its matching
reply. These buffers are sized based on the maximum possible size
of the RPC call and reply messages for the operation in progress.

This means that as the call buffer increases in size, the start of
the reply buffer is pushed farther into the memory allocation.

RPC requests are growing in size. It used to be that both the call
and reply buffers fit inside a single page.

But these days, thanks to NFSv4 (and especially security labels in
NFSv4.2) the maximum call and reply sizes are large. NFSv4.0 OPEN,
for example, now requires a 6KB allocation for a pair of call and
reply buffers, and NFSv4 LOOKUP is not far behind.

As the maximum size of a call increases, the reply buffer is pushed
far enough into the buffer's memory allocation that a page boundary
can appear in the middle of it.

When the maximum possible reply size is larger than the client's
RDMA receive buffers (currently 1KB), the client has to register a
Reply chunk for the server to RDMA Write the reply into.

The logic in rpcrdma_convert_iovs() assumes that xdr_buf head and
tail buffers would always be contained on a single page. It supplies
just one segment for the head and one for the tail.

FMR, for example, registers up to a page boundary (only a portion of
the reply buffer in the OPEN case above). But without additional
segments, it doesn't register the rest of the buffer.

When the server tries to write the OPEN reply, the RDMA Write fails
with a remote access error since the client registered only part of
the Reply chunk.

rpcrdma_convert_iovs() must split the XDR buffer into multiple
segments, each of which are guaranteed not to contain a page
boundary. That way fmr_op_map is given the proper number of segments
to register the whole reply buffer.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:55:53 -04:00
Chuck Lever af0f16e825 xprtrdma: Clean up dprintk format string containing a newline
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:55:50 -04:00
Chuck Lever 4d97291b6f xprtrdma: Clean up physical_op_map()
physical_op_unmap{_sync} don't use mr_nsegs, so don't bother to set
it in physical_op_map.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-14 14:55:47 -04:00
Martin KaFai Lau a44d6eacda tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In
Per RFC4898, they count segments sent/received
containing a positive length data segment (that includes
retransmission segments carrying data).  Unlike
tcpi_segs_out/in, tcpi_data_segs_out/in excludes segments
carrying no data (e.g. pure ack).

The patch also updates the segs_in in tcp_fastopen_add_skb()
so that segs_in >= data_segs_in property is kept.

Together with retransmission data, tcpi_data_segs_out
gives a better signal on the rxmit rate.

v6: Rebase on the latest net-next

v5: Eric pointed out that checking skb->len is still needed in
tcp_fastopen_add_skb() because skb can carry a FIN without data.
Hence, instead of open coding segs_in and data_segs_in, tcp_segs_in()
helper is used.  Comment is added to the fastopen case to explain why
segs_in has to be reset and tcp_segs_in() has to be called before
__skb_pull().

v4: Add comment to the changes in tcp_fastopen_add_skb()
and also add remark on this case in the commit message.

v3: Add const modifier to the skb parameter in tcp_segs_in()

v2: Rework based on recent fix by Eric:
commit a9d99ce28e ("tcp: fix tcpi_segs_in after connection establishment")

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Chris Rapier <rapier@psc.edu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 14:55:26 -04:00
Arnd Bergmann 8e0cc8c326 net: caif: fix misleading indentation
gcc points out code that is not indented the way it is
interpreted:

net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen':
net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
    return cfpkt_getlen(pkt);
    ^~~~~~
net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not
   else
   ^~~~

It is clear from the context that not returning here would be
a bug, as we'd end up passing a negative length into a function
that takes a u16 length, so it is not missing curly braces
here, and I'm assuming that the indentation is the only part
that's wrong about it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 13:09:50 -04:00
Arnaldo Carvalho de Melo 34b88a68f2 net: Fix use after free in the recvmmsg exit path
The syzkaller fuzzer hit the following use-after-free:

  Call Trace:
   [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295
   [<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261
   [<     inline     >] SYSC_recvmmsg net/socket.c:2281
   [<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270
   [<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
  arch/x86/entry/entry_64.S:185

And, as Dmitry rightly assessed, that is because we can drop the
reference and then touch it when the underlying recvmsg calls return
some packets and then hit an error, which will make recvmmsg to set
sock->sk->sk_err, oops, fix it.

Reported-and-Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Fixes: a2e2725541 ("net: Introduce recvmmsg socket syscall")
http://lkml.kernel.org/r/20160122211644.GC2470@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 12:41:49 -04:00
Richard Alpe 9bd160bfa2 tipc: make sure IPv6 header fits in skb headroom
Expand headroom further in order to be able to fit the larger IPv6
header. Prior to this patch this caused a skb under panic for certain
tipc packets when using IPv6 UDP bearer(s).

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 12:23:12 -04:00
Gregory CLEMENT 8cb2d8bf57 net: add a hardware buffer management helper API
This basic implementation allows to share code between driver using
hardware buffer management. As the code is hardware agnostic, there is
few helpers, most of the optimization brought by the an HW BM has to be
done at driver level.

Tested-by: Sebastian Careba <nitroshift@yahoo.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14 12:19:46 -04:00
Alexander Duyck 0833482495 GSO/UDP: Use skb->len instead of udph->len to determine length of original skb
It is possible for tunnels to end up generating IP or IPv6 datagrams that
are larger than 64K and expecting to be segmented.  As such we need to deal
with length values greater than 64K.  In order to accommodate this we need
to update the code to work with a 32b length value instead of a 16b one.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 23:55:14 -04:00
Alexander Duyck 1e94082963 ipv6: Pass proto to csum_ipv6_magic as __u8 instead of unsigned short
This patch updates csum_ipv6_magic so that it correctly recognizes that
protocol is a unsigned 8 bit value.

This will allow us to better understand what limitations may or may not be
present in how we handle the data.  For example there are a number of
places that call htonl on the protocol value.  This is likely not necessary
and can be replaced with a multiplication by ntohl(1) which will be
converted to a shift by the compiler.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 23:55:13 -04:00
David S. Miller fbd40ea018 ipv4: Don't do expensive useless work during inetdev destroy.
When an inetdev is destroyed, every address assigned to the interface
is removed.  And in this scenerio we do two pointless things which can
be very expensive if the number of assigned interfaces is large:

1) Address promotion.  We are deleting all addresses, so there is no
   point in doing this.

2) A full nf conntrack table purge for every address.  We only need to
   do this once, as is already caught by the existing
   masq_dev_notifier so masq_inet_event() can skip this.

Reported-by: Solar Designer <solar@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
2016-03-13 23:28:35 -04:00
David S. Miller f4fa6e6d88 NFC 4.6 pull request
This is a very small one this time, with only 5 patches.
 There are a couple of big items that could not be merged/finished
 on time.
 
 We have:
 
 - 2 LLCP fixes for a race and a potential OOM.
 - 2 cleanups for the pn544 and microread drivers.
 - 1 Maintainer addition for the s3fwrn5 driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW4ygDAAoJEIqAPN1PVmxKQ5gQAIN5MaT6gcu2/p1kd7FzPKyC
 KRb2EU907uVQObNLyZgU6liLYQ2prAvK7Dr9SuL10sl+zJkdU2TUuPfK+G4I50qQ
 nY7dHN94S0d1F6vBZVKFslh9+mrJKZCqhyN7WrCdXT2i7W5bYO8lw419nADImAq9
 fF4k7Ww+t9ZHGlzYun9WmNl8lGYz27w/sjjqnEbD8G+SZlkrqRNwccILP7rmOso2
 orGvzxouGiWmp4XcXno2X3ydfFVTl5LdVeaX6oyKxEBpcikz0QFJUmTcqqy0GqGo
 NeAGUip36MaJETXVgqKqeZERrST2Eminps3nTEwftd/ukOE+Sa8tX3spe2seN7mm
 o9ZBk8a0VChlhfGmIqnYZfksRyacEmVaLFV2W5EQdumL+G+jelCmpPgQKo0ZxEEX
 WTYULG5JiSIu34RjtTAP9tOPQ9XTV9hcArRYR355aki5EXGh/ntY1eVtV2nCSHjA
 vNZ0hpJNwfcx/0UlVULEJqxwDYYtl/QzJFTQO4l0zFYgf5SK9DXbOGDcZfoKgFf8
 7jzLn/hDzHNjCPocHDkXOq50H/pPHwdV65U4hPMnemcGVuVrNzHr5CyKBDgj7nXN
 NYP3S6fphg8W/DIlQFaTRAuBCqanZE5DIqFUgptSSdAmBLKagZKkaypUjCscb7Ee
 GinQKHm7YgZWG+YeAs4O
 =W1gM
 -----END PGP SIGNATURE-----

Merge tag 'nfc-next-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next

Samuel Ortiz says:

====================
NFC 4.6 pull request

This is a very small one this time, with only 5 patches.
There are a couple of big items that could not be merged/finished
on time.

We have:

- 2 LLCP fixes for a race and a potential OOM.
- 2 cleanups for the pn544 and microread drivers.
- 1 Maintainer addition for the s3fwrn5 driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 22:43:01 -04:00
liping.zhang f3c986908c net: socket: use pr_info_once to tip the obsolete usage of PF_PACKET
There is no need to use the static variable here, pr_info_once is more
concise.

Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 22:37:50 -04:00
Jesper Dangaard Brouer 885eb0a516 net: adjust napi_consume_skb to handle non-NAPI callers
Some drivers reuse/share code paths that free SKBs between NAPI
and non-NAPI calls. Adjust napi_consume_skb to handle this
use-case.

Before, calls from netpoll (w/ IRQs disabled) was handled and
indicated with a budget zero indication.  Use the same zero
indication to handle calls not originating from NAPI/softirq.
Simply handled by using dev_consume_skb_any().

This adds an extra branch+call for the netpoll case (checking
in_irq() + irqs_disabled()), but that is okay as this is a slowpath.

Suggested-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 22:35:35 -04:00
Marcelo Ricardo Leitner cea8768f33 sctp: allow sctp_transmit_packet and others to use gfp
Currently sctp_sendmsg() triggers some calls that will allocate memory
with GFP_ATOMIC even when not necessary. In the case of
sctp_packet_transmit it will allocate a linear skb that will be used to
construct the packet and this may cause sends to fail due to ENOMEM more
often than anticipated specially with big MTUs.

This patch thus allows it to inherit gfp flags from upper calls so that
it can use GFP_KERNEL if it was triggered by a sctp_sendmsg call or
similar. All others, like retransmits or flushes started from BH, are
still allocated using GFP_ATOMIC.

In netperf tests this didn't result in any performance drawbacks when
memory is not too fragmented and made it trigger ENOMEM way less often.

Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 22:29:07 -04:00
Samuel Gauthier 6f15cdbf8a ovs: allow nl 'flow set' to use ufid without flow key
When we want to change a flow using netlink, we have to identify it to
be able to perform a lookup. Both the flow key and unique flow ID
(ufid) are valid identifiers, but we always have to specify the flow
key in the netlink message. When both attributes are there, the ufid
is used. The flow key is used to validate the actions provided by
the userland.

This commit allows to use the ufid without having to provide the flow
key, as it is already done in the netlink 'flow get' and 'flow del'
path. The flow key remains mandatory when an action is provided.

Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 22:18:26 -04:00
Zhang Shengju 136ba622de netconf: add macro to represent all attributes
This patch adds macro NETCONFA_ALL to represent all type of netconf
attributes for IPv4 and IPv6.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 21:54:44 -04:00
Xin Long 39d2adebf1 sctp: fix the transports round robin issue when init is retransmitted
prior to this patch, at the beginning if we have two paths in one assoc,
they may have the same params other than the last_time_heard, it will try
the paths like this:

1st cycle
  try trans1 fail.
  then trans2 is selected.(cause it's last_time_heard is after trans1).

2nd cycle:
  try  trans2 fail
  then trans2 is selected.(cause it's last_time_heard is after trans1).

3rd cycle:
  try  trans2 fail
  then trans2 is selected.(cause it's last_time_heard is after trans1).

....

trans1 will never have change to be selected, which is not what we expect.
we should keeping round robin all the paths if they are just added at the
beginning.

So at first every tranport's last_time_heard should be initialized 0, so
that we ensure they have the same value at the beginning, only by this,
all the transports could get equal chance to be selected.

Then for sctp_trans_elect_best, it should return the trans_next one when
*trans == *trans_next, so that we can try next if it fails,  but now it
always return trans. so we can fix it by exchanging these two params when
we calls sctp_trans_elect_tie().

Fixes: 4c47af4d5e ('net: sctp: rework multihoming retransmission path selection to rfc4960')
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 21:52:50 -04:00
David Howells dad8aff754 rxrpc: Replace all unsigned with unsigned int
Replace all "unsigned" types with "unsigned int" types.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 15:14:57 -04:00
Alexander Duyck c194cf93c1 gro: Defer clearing of flush bit in tunnel paths
This patch updates the GRO handlers for GRE, VXLAN, GENEVE, and FOU so that
we do not clear the flush bit until after we have called the next level GRO
handler.  Previously this was being cleared before parsing through the list
of frames, however this resulted in several paths where either the bit
needed to be reset but wasn't as in the case of FOU, or cases where it was
being set as in GENEVE.  By just deferring the clearing of the bit until
after the next level protocol has been parsed we can avoid any unnecessary
bit twiddling and avoid bugs.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13 15:01:00 -04:00
Florian Westphal d157bd7615 netfilter: x_tables: check for size overflow
Ben Hawkes says:
 integer overflow in xt_alloc_table_info, which on 32-bit systems can
 lead to small structure allocation and a copy_from_user based heap
 corruption.

Reported-by: Ben Hawkes <hawkes@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-12 11:55:01 +01:00
Daniel Borkmann 4018ab1875 bpf: support flow label for bpf_skb_{set, get}_tunnel_key
This patch extends bpf_tunnel_key with a tunnel_label member, that maps
to ip_tunnel_key's label so underlying backends like vxlan and geneve
can propagate the label to udp_tunnel6_xmit_skb(), where it's being set
in the IPv6 header. It allows for having 20 more bits to encode/decode
flow related meta information programmatically. Tested with vxlan and
geneve.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 15:14:27 -05:00
Daniel Borkmann 134611446d ip_tunnel: add support for setting flow label via collect metadata
This patch extends udp_tunnel6_xmit_skb() to pass in the IPv6 flow label
from call sites. Currently, there's no such option and it's always set to
zero when writing ip6_flow_hdr(). Add a label member to ip_tunnel_key, so
that flow-based tunnels via collect metadata frontends can make use of it.
vxlan and geneve will be converted to add flow label support separately.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 15:14:26 -05:00
Stephen Hemminger 4c656c13b2 bridge: allow zero ageing time
This fixes a regression in the bridge ageing time caused by:
commit c62987bbd8 ("bridge: push bridge setting ageing_time down to switchdev")

There are users of Linux bridge which use the feature that if ageing time
is set to 0 it causes entries to never expire. See:
  https://www.linuxfoundation.org/collaborate/workgroups/networking/bridge

For a pure software bridge, it is unnecessary for the code to have
arbitrary restrictions on what values are allowable.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 14:58:58 -05:00
Amir Vadai 8208d21bf3 net/flower: Fix pointer cast
Cast pointer to unsigned long instead of u64, to fix compilation warning
on 32 bit arch, spotted by 0day build.

Fixes: 5b33f48 ("net/flower: Introduce hardware offload support")
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11 12:04:37 -05:00
Johan Hedberg 6a0e78072c Bluetooth: Fix potential buffer overflow with Add Advertising
The Add Advertising command handler does the appropriate checks for
the AD and Scan Response data, however fails to take into account the
general length of the mgmt command itself, which could lead to
potential buffer overflows. This patch adds the necessary check that
the mgmt command length is consistent with the given ad and scan_rsp
lengths.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2016-03-11 16:28:43 +01:00
Johan Hedberg 6a19cc8c89 Bluetooth: Fix setting correct flags in AD
A recent change added MGMT_ADV_FLAG_DISCOV to the flags returned by
get_adv_instance_flags(), however failed to take into account limited
discoverable mode. This patch fixes the issue by setting the correct
discoverability flag in the AD data.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-11 16:28:24 +01:00
Florian Westphal f0716cd6eb netfilter: nft_compat: check match/targetinfo attr size
We copy according to ->target|matchsize, so check that the netlink attribute
(which can include padding and might be larger) contains enough data.

Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-11 11:37:56 +01:00
Pablo Neira Ayuso d387eaf51f Merge tag 'ipvs-fixes-for-v4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs
Simon Horman says:

====================
please consider these IPVS fixes for v4.5 or
if it is too late please consider them for v4.6.

* Arnd Bergman has corrected an error whereby the SIP persistence engine
  may incorrectly access protocol fields
* Julian Anastasov has corrected a problem reported by Jiri Bohac with the
  connection rescheduling mechanism added in 3.10 when new SYNs in
  connection to dead real server can be redirected to another real server.
* Marco Angaroni resolved a problem in the SIP persistence engine
  whereby the Call-ID could not be found if it was at the beginning of a
  SIP message.
====================

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-11 11:37:35 +01:00
Christoph Hellwig 7cf20fc624 net/9p: convert to new CQ API
Trivial conversion to the new RDMA CQ API.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10 20:54:09 -05:00
Amir Vadai 8de2d793da net/flow_dissector: Make dissector_uses_key() and skb_flow_dissector_target() public
Will be used in a following patch to query if a key is being used, and
what it's value in the target object.

Acked-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-10 16:24:02 -05:00
Amir Vadai 5b33f48842 net/flower: Introduce hardware offload support
This patch is based on a patch made by John Fastabend.
It adds support for offloading cls_flower.
when NETIF_F_HW_TC is on:
  flags = 0       => Rule will be processed twice - by hardware, and if
                     still relevant, by software.
  flags = SKIP_HW => Rull will be processed by software only

If hardware fail/not capabale to apply the rule, operation will NOT
fail. Filter will be processed by SW only.

Acked-by: Jiri Pirko <jiri@mellanox.com>
Suggested-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-10 16:24:02 -05:00
Neil Armstrong 04761890a7 net: dsa: Fix cleanup resources upon module removal
The initial commit badly merged into the dsa_resume method instead
of the dsa_remove_dst method.
As consequence, the dst->master_netdev->dsa_ptr is not set to NULL on
removal and re-bind of the dsa device fails with error -17.

Fixes: b0dc635d92 ("net: dsa: cleanup resources upon module removal ")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-10 16:20:17 -05:00
Johan Hedberg 9c176cec42 Bluetooth: Increment management interface revision
Increment the mgmt revision due to the recently added limited
privacy mode.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:30 +01:00
Johan Hedberg 82a37adeed Bluetooth: Add support for limited privacy mode
Introduce a limited privacy mode indicated by value 0x02 to the mgmt
Set Privacy command.

With value 0x02 the kernel will use privacy mode with a resolvable
private address. In case the controller is bondable and discoverable
the identity address will be used.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:30 +01:00
Johan Hedberg d43efbd0d5 Bluetooth: Fix adding discoverable to adv instance flags
When lookup up the advertising instance flags for the default
advertising instance (0) the discoverable flag should be filled in
based on the HCI_DISCOVERABLE flag.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:29 +01:00
Johan Hedberg eec7a01dc8 Bluetooth: Move memset closer to where it's needed
Minor fix to not do the memset until the variable it clears is
actually used.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:29 +01:00
Alexander Aring 24c4a81d76 6lowpan: iphc: fix SAM/DAM bit comment
This patch fixes the comments for SAM/DAM value.

Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:29 +01:00
Alexander Aring 6aaf37b41a 6lowpan: debugfs: add missing static
This patch solves the sparse warning:

net/6lowpan/debugfs.c:164:30: warning: symbol 'lowpan_ctx_pfx_fops' was
not declared. Should it be static?
net/6lowpan/debugfs.c:241:30: warning: symbol 'lowpan_context_fops' was
not declared. Should it be static?

Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:29 +01:00
Pablo Neira Ayuso 793882bfc3 Merge branch 'master' of git://blackhole.kfki.hu/nf
Jozsef Kadlecsik says:

====================
Please apply the next patch against the nf tree:

- Deniz Eren reported that parallel flush/dump of list:set type of sets
  can lead to kernel crash. The bug was due to non-RCU compatible
  flushing, listing in the set type, fixed by me.

- Julia Lawall pointed out that IPSET_ATTR_ETHER netlink attribute
  length was not checked explicitly. The patch adds the missing
  checkings.
====================

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-03-10 17:34:00 +01:00
Willem de Bruijn 9ed988cd59 packet: validate variable length ll headers
Replace link layer header validation check ll_header_truncate with
more generic dev_validate_header.

Validation based on hard_header_len incorrectly drops valid packets
in variable length protocols, such as AX25. dev_validate_header
calls header_ops.validate for such protocols to ensure correctness
below hard_header_len.

See also http://comments.gmane.org/gmane.linux.network/401064

Fixes 9c7077622d ("packet: make packet_snd fail on len smaller than l2 header")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 22:13:01 -05:00
Willem de Bruijn ea47781c26 ax25: add link layer header validation function
As variable length protocol, AX25 fails link layer header validation
tests based on a minimum length. header_ops.validate allows protocols
to validate headers that are shorter than hard_header_len. Implement
this callback for AX25.

See also http://comments.gmane.org/gmane.linux.network/401064

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 22:13:01 -05:00
Tom Herbert 29152a34f7 kcm: Add receive message timeout
This patch adds receive timeout for message assembly on the attached TCP
sockets. The timeout is set when a new messages is started and the whole
message has not been received by TCP (not in the receive queue). If the
completely message is subsequently received the timer is cancelled, if the
timer expires the RX side is aborted.

The timeout value is taken from the socket timeout (SO_RCVTIMEO) that is
set on a TCP socket (i.e. set by get sockopt before attaching a TCP socket
to KCM.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:15 -05:00
Tom Herbert 7ced95ef52 kcm: Add memory limit for receive message construction
Message assembly is performed on the TCP socket. This is logically
equivalent of an application that performs a peek on the socket to find
out how much memory is needed for a receive buffer. The receive socket
buffer also provides the maximum message size which is checked.

The receive algorithm is something like:

   1) Receive the first skbuf for a message (or skbufs if multiple are
      needed to determine message length).
   2) Check the message length against the number of bytes in the TCP
      receive queue (tcp_inq()).
	- If all the bytes of the message are in the queue (incluing the
	  skbuf received), then proceed with message assembly (it should
	  complete with the tcp_read_sock)
        - Else, mark the psock with the number of bytes needed to
	  complete the message.
   3) In TCP data ready function, if the psock indicates that we are
      waiting for the rest of the bytes of a messages, check the number
      of queued bytes against that.
        - If there are still not enough bytes for the message, just
	  return
        - Else, clear the waiting bytes and proceed to receive the
	  skbufs.  The message should now be received in one
	  tcp_read_sock

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:15 -05:00
Tom Herbert f29698fc6b kcm: Sendpage support
Implement kcm_sendpage. Set in sendpage to kcm_sendpage in both
dgram and seqpacket ops.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:15 -05:00
Tom Herbert 91687355b9 kcm: Splice support
Implement kcm_splice_read. This is supported only for seqpacket.
Add kcm_seqpacket_ops and set splice read to kcm_splice_read.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:15 -05:00
Tom Herbert cd6e111bf5 kcm: Add statistics and proc interfaces
This patch adds various counters for KCM. These include counters for
messages and bytes received or sent, as well as counters for number of
attached/unattached TCP sockets and other error or edge events.

The statistics are exposed via a proc interface. /proc/net/kcm provides
statistics per KCM socket and per psock (attached TCP sockets).
/proc/net/kcm_stats provides aggregate statistics.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:14 -05:00
Tom Herbert ab7ac4eb98 kcm: Kernel Connection Multiplexor module
This module implements the Kernel Connection Multiplexor.

Kernel Connection Multiplexor (KCM) is a facility that provides a
message based interface over TCP for generic application protocols.
With KCM an application can efficiently send and receive application
protocol messages over TCP using datagram sockets.

For more information see the included Documentation/networking/kcm.txt

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:14 -05:00
Tom Herbert 473bd239b8 tcp: Add tcp_inq to get available receive bytes on socket
Create a common kernel function to get the number of bytes available
on a TCP socket. This is based on code in INQ getsockopt and we now call
the function for that getsockopt.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:14 -05:00
Tom Herbert fa9835e52e net: Walk fragments in __skb_splice_bits
Add walking of fragments in __skb_splice_bits.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:14 -05:00
Tom Herbert f092276d85 net: Add MSG_BATCH flag
Add a new msg flag called MSG_BATCH. This flag is used in sendmsg to
indicate that more messages will follow (i.e. a batch of messages is
being sent). This is similar to MSG_MORE except that the following
messages are not merged into one packet, they are sent individually.
sendmmsg is updated so that each contained message except for the
last one is marked as MSG_BATCH.

MSG_BATCH is a performance optimization in cases where a socket
implementation can benefit by transmitting packets in a batch.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:13 -05:00
Tom Herbert 28a94d8fb3 net: Allow MSG_EOR in each msghdr of sendmmsg
This patch allows setting MSG_EOR in each individual msghdr passed
in sendmmsg. This allows a sendmmsg to send multiple messages when
using SOCK_SEQPACKET.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:13 -05:00
Tom Herbert f4a00aacdb net: Make sock_alloc exportable
Export it for cases where we want to create sockets by hand.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-09 16:36:13 -05:00
Michal Kubeček 3dc94f93be ipv6: per netns FIB garbage collection
One of our customers observed issues with FIB6 garbage collectors
running in different network namespaces blocking each other, resulting
in soft lockups (fib6_run_gc() initiated from timer runs always in
forced mode).

Now that FIB6 walkers are separated per namespace, there is no more need
for instances of fib6_run_gc() in different namespaces blocking each
other. There is still a call to icmp6_dst_gc() which operates on shared
data but this function is protected by its own shared lock.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 15:16:51 -05:00
Michal Kubeček 9a03cd8f38 ipv6: per netns fib6 walkers
The IPv6 FIB data structures are separated per network namespace but
there is still only one global walkers list and one global walker list
lock. This means changes in one namespace unnecessarily interfere with
walkers in other namespaces.

Replace the global list with per-netns lists (and give each its own
lock).

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 15:16:51 -05:00
Michal Kubeček 3570df914f ipv6: replace global gc_args with local variable
Global variable gc_args is only used in fib6_run_gc() and functions
called from it. As fib6_run_gc() makes sure there is at most one
instance of fib6_clean_all() running at any moment, we can replace
gc_args with a local variable which will be needed once multiple
instances (per netns) of garbage collector are allowed.

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 15:16:50 -05:00
Marcelo Ricardo Leitner 133800d1f0 sctp: fix copying more bytes than expected in sctp_add_bind_addr
Dmitry reported that sctp_add_bind_addr may read more bytes than
expected in case the parameter is a IPv4 addr supplied by the user
through calls such as sctp_bindx_add(), because it always copies
sizeof(union sctp_addr) while the buffer may be just a struct
sockaddr_in, which is smaller.

This patch then fixes it by limiting the memcpy to the min between the
union size and a (new parameter) provided addr size. Where possible this
parameter still is the size of that union, except for reading from
user-provided buffers, which then it accounts for protocol type.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 15:04:08 -05:00
Jozsef Kadlecsik d8aacd8718 netfilter: ipset: Check IPSET_ATTR_ETHER netlink attribute length
Julia Lawall pointed out that IPSET_ATTR_ETHER netlink attribute length
was not checked explicitly, just for the maximum possible size. Malicious
netlink clients could send shorter attribute and thus resulting a kernel
read after the buffer.

The patch adds the explicit length checkings.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2016-03-08 20:36:17 +01:00
Kyeong Yoo f8b33d8e87 net_sched: dsmark: use qdisc_dequeue_peeked()
This fix is for dsmark similar to commit 3557619f0f
("net_sched: prio: use qdisc_dequeue_peeked")
and makes use of qdisc_dequeue_peeked() instead of direct dequeue() call.

First time, wrr peeks dsmark, which will then peek into sfq.
sfq dequeues an skb and it's stored in sch->gso_skb.
Next time, wrr tries to dequeue from dsmark, which will call sfq dequeue
directly. This results skipping the previously peeked skb.

So changed dsmark dequeue to call qdisc_dequeue_peeked() instead to use
peeked skb if exists.

Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 14:35:13 -05:00
David S. Miller 4c38cd61ae Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter updates for your net-next tree,
they are:

1) Remove useless debug message when deleting IPVS service, from
   Yannick Brosseau.

2) Get rid of compilation warning when CONFIG_PROC_FS is unset in
   several spots of the IPVS code, from Arnd Bergmann.

3) Add prandom_u32 support to nft_meta, from Florian Westphal.

4) Remove unused variable in xt_osf, from Sudip Mukherjee.

5) Don't calculate IP checksum twice from netfilter ipv4 defrag hook
   since fixing af_packet defragmentation issues, from Joe Stringer.

6) On-demand hook registration for iptables from netns. Instead of
   registering the hooks for every available netns whenever we need
   one of the support tables, we register this on the specific netns
   that needs it, patchset from Florian Westphal.

7) Add missing port range selection to nf_tables masquerading support.

BTW, just for the record, there is a typo in the description of
5f6c253ebe ("netfilter: bridge: register hooks only when bridge
interface is added") that refers to the cluster match as deprecated, but
it is actually the CLUSTERIP target (which registers hooks
inconditionally) the one that is scheduled for removal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 14:25:20 -05:00
Daniel Borkmann db3c6139e6 bpf, vxlan, geneve, gre: fix usage of dst_cache on xmit
The assumptions from commit 0c1d70af92 ("net: use dst_cache for vxlan
device"), 468dfffcd7 ("geneve: add dst caching support") and 3c1cb4d260
("net/ipv4: add dst cache support for gre lwtunnels") on dst_cache usage
when ip_tunnel_info is used is unfortunately not always valid as assumed.

While it seems correct for ip_tunnel_info front-ends such as OVS, eBPF
however can fill in ip_tunnel_info for consumers like vxlan, geneve or gre
with different remote dsts, tos, etc, therefore they cannot be assumed as
packet independent.

Right now vxlan, geneve, gre would cache the dst for eBPF and every packet
would reuse the same entry that was first created on the initial route
lookup. eBPF doesn't store/cache the ip_tunnel_info, so each skb may have
a different one.

Fix it by adding a flag that checks the ip_tunnel_info. Also the !tos test
in vxlan needs to be handeled differently in this context as it is currently
inferred from ip_tunnel_info as well if present. ip_tunnel_dst_cache_usable()
helper is added for the three tunnel cases, which checks if we can use dst
cache.

Fixes: 0c1d70af92 ("net: use dst_cache for vxlan device")
Fixes: 468dfffcd7 ("geneve: add dst caching support")
Fixes: 3c1cb4d260 ("net/ipv4: add dst cache support for gre lwtunnels")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:58:47 -05:00
Daniel Borkmann 14ca0751c9 bpf: support for access to tunnel options
After eBPF being able to programmatically access/manage tunnel key meta
data via commit d3aa45ce6b ("bpf: add helpers to access tunnel metadata")
and more recently also for IPv6 through c6c3345407 ("bpf: support ipv6
for bpf_skb_{set,get}_tunnel_key"), this work adds two complementary
helpers to generically access their auxiliary tunnel options.

Geneve and vxlan support this facility. For geneve, TLVs can be pushed,
and for the vxlan case its GBP extension. I.e. setting tunnel key for geneve
case only makes sense, if we can also read/write TLVs into it. In the GBP
case, it provides the flexibility to easily map the group policy ID in
combination with other helpers or maps.

I chose to model this as two separate helpers, bpf_skb_{set,get}_tunnel_opt(),
for a couple of reasons. bpf_skb_{set,get}_tunnel_key() is already rather
complex by itself, and there may be cases for tunnel key backends where
tunnel options are not always needed. If we would have integrated this
into bpf_skb_{set,get}_tunnel_key() nevertheless, we are very limited with
remaining helper arguments, so keeping compatibility on structs in case of
passing in a flat buffer gets more cumbersome. Separating both also allows
for more flexibility and future extensibility, f.e. options could be fed
directly from a map, etc.

Moreover, change geneve's xmit path to test only for info->options_len
instead of TUNNEL_GENEVE_OPT flag. This makes it more consistent with vxlan's
xmit path and allows for avoiding to specify a protocol flag in the API on
xmit, so it can be protocol agnostic. Having info->options_len is enough
information that is needed. Tested with vxlan and geneve.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:58:46 -05:00
Daniel Borkmann 2208087061 bpf: allow to propagate df in bpf_skb_set_tunnel_key
Added by 9a628224a6 ("ip_tunnel: Add dont fragment flag."), allow to
feed df flag into tunneling facilities (currently supported on TX by
vxlan, geneve and gre) as a hint from eBPF's bpf_skb_set_tunnel_key()
helper.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:58:46 -05:00
Daniel Borkmann 577c50aade bpf: make helper function protos static
They are only used here, so there's no reason they should not be static.
Only the vlan push/pop protos are used in the test_bpf suite.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:55:15 -05:00
Daniel Borkmann 8afd54c87a bpf: add flags to bpf_skb_store_bytes for clearing hash
When overwriting parts of the packet with bpf_skb_store_bytes() that
were fed previously into skb->hash calculation, we should clear the
current hash with skb_clear_hash(), so that a next skb_get_hash() call
can determine the correct hash related to this skb.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:55:15 -05:00
Daniel Borkmann 8050c0f027 bpf: allow bpf_csum_diff to feed bpf_l3_csum_replace as well
Commit 7d672345ed ("bpf: add generic bpf_csum_diff helper") added a
generic checksum diff helper that can feed bpf_l4_csum_replace() with
a target __wsum diff that is to be applied to the L4 checksum. This
facility is very flexible, can be cascaded, allows for adding, removing,
or diffing data, or for calculating the pseudo header checksum from
scratch, but it can also be reused for working with the IPv4 header
checksum.

Thus, analogous to bpf_l4_csum_replace(), add a case for header field
value of 0 to change the checksum at a given offset through a new helper
csum_replace_by_diff(). Also, in addition to that, this provides an
easy to use interface for feeding precalculated diffs f.e. coming from
a map. It nicely complements bpf_l3_csum_replace() that currently allows
only for csum updates of 2 and 4 byte diffs.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 13:55:15 -05:00
David S. Miller 810813c47a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Several cases of overlapping changes, as well as one instance
(vxlan) of a bug fix in 'net' overlapping with code movement
in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 12:34:12 -05:00
Linus Torvalds e2857b8f11 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix ordering of WEXT netlink messages so we don't see a newlink
    after a dellink, from Johannes Berg.

 2) Out of bounds access in minstrel_ht_set_best_prob_rage, from
    Konstantin Khlebnikov.

 3) Paging buffer memory leak in iwlwifi, from Matti Gottlieb.

 4) Wrong units used to set initial TCP rto from cached metrics, also
    from Konstantin Khlebnikov.

 5) Fix stale IP options data in the SKB control block from leaking
    through layers of encapsulation, from Bernie Harris.

 6) Zero padding len miscalculated in bnxt_en, from Michael Chan.

 7) Only CHECKSUM_PARTIAL packets should be passed down through GSO, fix
    from Hannes Frederic Sowa.

 8) Fix suspend/resume with JME networking devices, from Diego Violat
    and Guo-Fu Tseng.

 9) Checksums not validated properly in bridge multicast support due to
    the placement of the SKB header pointers at the time of the check,
    fix from Álvaro Fernández Rojas.

10) Fix hang/tiemout with r8169 if a stats fetch is done while the
    device is runtime suspended.  From Chun-Hao Lin.

11) The forwarding database netlink dump facilities don't track the
    state of the dump properly, resulting in skipped/missed entries.
    From Minoura Makoto.

12) Fix regression from a recent 3c59x bug fix, from Neil Horman.

13) Fix list corruption in bna driver, from Ivan Vecera.

14) Big endian machines crash on vlan add in bnx2x, fix from Michal
    Schmidt.

15) Ethtool RSS configuration not propagated properly in mlx5 driver,
    from Tariq Toukan.

16) Fix regression in PHY probing in stmmac driver, from Gabriel
    Fernandez.

17) Fix SKB tailroom calculation in igmp/mld code, from Benjamin
    Poirier.

18) A past change to skip empty routing headers in ipv6 extention header
    parsing accidently caused fragment headers to not be matched any
    longer.  Fix from Florian Westphal.

19) eTSEC-106 erratum needs to be applied to more gianfar chips, from
    Atsushi Nemoto.

20) Fix netdev reference after free via workqueues in usb networking
    drivers, from Oliver Neukum and Bjørn Mork.

21) mdio->irq is now an array rather than a pointer to dynamic memory,
    but several drivers were still trying to free it :-/ Fixes from
    Colin Ian King.

22) act_ipt iptables action forgets to set the family field, thus LOG
    netfilter targets don't work with it.  Fix from Phil Sutter.

23) SKB leak in ibmveth when skb_linearize() fails, from Thomas Falcon.

24) pskb_may_pull() cannot be called with interrupts disabled, fix code
    that tries to do this in vmxnet3 driver, from Neil Horman.

25) be2net driver leaks iomap'd memory on removal, fix from Douglas
    Miller.

26) Forgotton RTNL mutex unlock in ppp_create_interface() error paths,
    from Guillaume Nault.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (97 commits)
  ppp: release rtnl mutex when interface creation fails
  cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind
  tcp: fix tcpi_segs_in after connection establishment
  net: hns: fix the bug about loopback
  jme: Fix device PM wakeup API usage
  jme: Do not enable NIC WoL functions on S0
  udp6: fix UDP/IPv6 encap resubmit path
  be2net: Don't leak iomapped memory on removal.
  vmxnet3: avoid calling pskb_may_pull with interrupts disabled
  net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM
  ibmveth: check return of skb_linearize in ibmveth_start_xmit
  cdc_ncm: toggle altsetting to force reset before setup
  usbnet: cleanup after bind() in probe()
  mlxsw: pci: Correctly determine if descriptor queue is full
  mlxsw: spectrum: Always decrement bridge's ref count
  tipc: fix nullptr crash during subscription cancel
  net: eth: altera: do not free array priv->mdio->irq
  net/ethoc: do not free array priv->mdio->irq
  net: sched: fix act_ipt for LOG target
  asix: do not free array priv->mdio->irq
  ...
2016-03-07 15:41:10 -08:00
Eric Dumazet a9d99ce28e tcp: fix tcpi_segs_in after connection establishment
If final packet (ACK) of 3WHS is lost, it appears we do not properly
account the following incoming segment into tcpi_segs_in

While we are at it, starts segs_in with one, to count the SYN packet.

We do not yet count number of SYN we received for a request sock, we
might add this someday.

packetdrill script showing proper behavior after fix :

// Tests tcpi_segs_in when 3rd packet (ACK) of 3WHS is lost
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

   +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop>
   +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.020 < P. 1:1001(1000) ack 1 win 32792

   +0 accept(3, ..., ...) = 4

+.000 %{ assert tcpi_segs_in == 2, 'tcpi_segs_in=%d' % tcpi_segs_in }%

Fixes: 2efd055c53 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07 15:47:13 -05:00
Bill Sommerfeld 59dca1d8a6 udp6: fix UDP/IPv6 encap resubmit path
IPv4 interprets a negative return value from a protocol handler as a
request to redispatch to a new protocol.  In contrast, IPv6 interprets a
negative value as an error, and interprets a positive value as a request
for redispatch.

UDP for IPv6 was unaware of this difference.  Change __udp6_lib_rcv() to
return a positive value for redispatch.  Note that the socket's
encap_rcv hook still needs to return a negative value to request
dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to
identify the byte containing the next protocol.

Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07 15:23:12 -05:00
Richard Alpe 49cc66eaee tipc: move netlink policies to netlink.c
Make the c files less cluttered and enable netlink attributes to be
shared between files.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07 14:56:41 -05:00
Zhang Shengju 8dfd329fbc arp: correct return value of arp_rcv
Currently, arp_rcv() always return zero on a packet delivery upcall.

To make its behavior more compliant with the way this API should be
used, this patch changes this to let it return NET_RX_SUCCESS when the
packet is proper handled, and NET_RX_DROP otherwise.

v1->v2:
If sanity check is failed, call kfree_skb() instead of consume_skb(), then
return the correct return value.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07 14:55:04 -05:00
Wei Tang 8303394d81 netlabel: do not initialise statics to NULL
This patch fixes the checkpatch.pl error to netlabel_domainhash.c:

ERROR: do not initialise statics to NULL

Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07 11:08:26 -05:00
Wei Tang 795f3512ca netlink: do not initialise statics to 0 or NULL
This patch fixes the checkpatch.pl error to netlabel_unlabeled.c:

ERROR: do not initialise statics to 0 or NULL

Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07 11:08:26 -05:00
Jon Paul Maloy e74a386d70 tipc: remove pre-allocated message header in link struct
Until now, we have kept a pre-allocated protocol message header
aggregated into struct tipc_link. Apart from adding unnecessary
footprint to the link instances, this requires extra code both to
initialize and re-initialize it.

We now remove this sub-optimization. This change also makes it
possible to clean up the function tipc_build_proto_msg() and remove
a couple of small functions that were accessing the mentioned header.
In particular, we can replace all occurrences of the local function
call link_own_addr(link) with the generic tipc_own_addr(net).

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 23:01:20 -05:00
Parthasarathy Bhuvaragan 4de13d7ed6 tipc: fix nullptr crash during subscription cancel
commit 4d5cfcba2f ('tipc: fix connection abort during subscription
cancel'), removes the check for a valid subscription before calling
tipc_nametbl_subscribe().

This will lead to a nullptr exception when we process a
subscription cancel request. For a cancel request, a null
subscription is passed to tipc_nametbl_subscribe() resulting
in exception.

In this commit, we call tipc_nametbl_subscribe() only for
a valid subscription.

Fixes: 4d5cfcba2f ('tipc: fix connection abort during subscription cancel')
Reported-by: Anders Widell <anders.widell@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 23:00:08 -05:00
Phil Sutter 44ef548f4f net: sched: fix act_ipt for LOG target
Before calling the destroy() or target() callbacks, the family parameter
field has to be initialized. Otherwise at least the LOG target will
refuse to work and upon removal oops the kernel.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:57:35 -05:00
Richard Alpe 34f65dbb6c tipc: make sure required IPv6 addresses are scoped
Make sure the user has provided a scope for multicast and link local
addresses used locally by a UDP bearer.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:54:57 -05:00
Richard Alpe ddb3712552 tipc: safely copy UDP netlink data from user
The netlink policy for TIPC_NLA_UDP_LOCAL and TIPC_NLA_UDP_REMOTE
is of type binary with a defined length. This causes the policy
framework to threat the defined length as maximum length.

There is however no protection against a user sending a smaller
amount of data. Prior to this patch this wasn't handled which could
result in a partially incomplete sockaddr_storage struct containing
uninitialized data.

In this patch we use nla_memcpy() when copying the user data. This
ensures a potential gap at the end is cleared out properly.

This was found by Julia with Coccinelle tool.

Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:54:57 -05:00
Richard Alpe 2837f39c7c tipc: don't check link reset on non existing link
Make sure we have a link before checking if it has been reset or not.

Prior to this patch tipc_link_is_reset() could be called with a non
existing link, resulting in a null pointer dereference.

Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:54:56 -05:00
Richard Alpe 9b3009604b tipc: add net device to skb before UDP xmit
Prior to this patch enabling a IPv4 UDP bearer caused a null pointer
dereference in iptunnel_xmit_stats(), when it tried to dereference the
net device from the skb. To resolve this we now point the skb device
to the net device resolved from the routing table.

Fixes: 039f50629b (ip_tunnel: Move stats update to iptunnel_xmit())
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:54:56 -05:00
WANG Cong d1491fa54c act_ife: fix a typo in kmemdup() parameters
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06 22:43:44 -05:00
Marco Angaroni 7617a24f83 ipvs: correct initial offset of Call-ID header search in SIP persistence engine
The IPVS SIP persistence engine is not able to parse the SIP header
"Call-ID" when such header is inserted in the first positions of
the SIP message.

When IPVS is configured with "--pe sip" option, like for example:
ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o
some particular messages (see below for details) do not create entries
in the connection template table, which can be listed with:
ipvsadm -Lcn --persistent-conn

Problematic SIP messages are SIP responses having "Call-ID" header
positioned just after message first line:
SIP/2.0 200 OK
[Call-ID header here]
[rest of the headers]

When "Call-ID" header is positioned down (after a few other headers)
it is correctly recognized.

This is due to the data offset used in get_callid function call inside
ip_vs_pe_sip.c file: since dptr already points to the start of the
SIP message, the value of dataoff should be initially 0.
Otherwise the header is searched starting from some bytes after the
first character of the SIP message.

Fixes: 758ff03387 ("IPVS: sip persistence engine")
Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2016-03-07 11:53:35 +09:00
Julian Anastasov f911b675a0 ipvs: allow rescheduling after RST
"RFC 5961, 4.2. Mitigation" describes a mechanism to request
client to confirm with RST the restart of TCP connection
before resending its SYN. As result, IPVS can see SYNs for
existing connection in CLOSE state. Add check to allow
rescheduling in this state.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2016-03-07 11:53:32 +09:00
Julian Anastasov f719e3754e ipvs: drop first packet to redirect conntrack
Jiri Bohac is reporting for a problem where the attempt
to reschedule existing connection to another real server
needs proper redirect for the conntrack used by the IPVS
connection. For example, when IPVS connection is created
to NAT-ed real server we alter the reply direction of
conntrack. If we later decide to select different real
server we can not alter again the conntrack. And if we
expire the old connection, the new connection is left
without conntrack.

So, the only way to redirect both the IPVS connection and
the Netfilter's conntrack is to drop the SYN packet that
hits existing connection, to wait for the next jiffie
to expire the old connection and its conntrack and to rely
on client's retransmission to create new connection as
usually.

Jiri Bohac provided a fix that drops all SYNs on rescheduling,
I extended his patch to do such drops only for connections
that use conntrack. Here is the original report from Jiri Bohac:

Since commit dc7b3eb900 ("ipvs: Fix reuse connection if real server
is dead"), new connections to dead servers are redistributed
immediately to new servers.  The old connection is expired using
ip_vs_conn_expire_now() which sets the connection timer to expire
immediately.

However, before the timer callback, ip_vs_conn_expire(), is run
to clean the connection's conntrack entry, the new redistributed
connection may already be established and its conntrack removed
instead.

Fix this by dropping the first packet of the new connection
instead, like we do when the destination server is not available.
The timer will have deleted the old conntrack entry long before
the first packet of the new connection is retransmitted.

Fixes: dc7b3eb900 ("ipvs: Fix reuse connection if real server is dead")
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2016-03-07 11:53:30 +09:00
Arnd Bergmann 3f20efba41 ipvs: handle ip_vs_fill_iph_skb_off failure
ip_vs_fill_iph_skb_off() may not find an IP header, and gcc has
determined that ip_vs_sip_fill_param() then incorrectly accesses
the protocol fields:

net/netfilter/ipvs/ip_vs_pe_sip.c: In function 'ip_vs_sip_fill_param':
net/netfilter/ipvs/ip_vs_pe_sip.c:76:5: error: 'iph.protocol' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  if (iph.protocol != IPPROTO_UDP)
     ^
net/netfilter/ipvs/ip_vs_pe_sip.c:81:10: error: 'iph.len' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  dataoff = iph.len + sizeof(struct udphdr);
          ^

This adds a check for the ip_vs_fill_iph_skb_off() return code
before looking at the ip header data returned from it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b0e010c527 ("ipvs: replace ip_vs_fill_ip4hdr with ip_vs_fill_iph_skb_off")
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2016-03-07 11:53:28 +09:00
Zhang Shengju 3ef523aeee wireless: use reset to set mac header
Since offset is zero, it's not necessary to use set function. Reset
function is straightforward, and will remove the unnecessary add
operation in set function.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-04 22:45:13 -05:00
Zhang Shengju d57a544d71 mac80211: use reset to set header pointer
Since offset is zero, it's not necessary to use set function. Reset
function is straightforward, and will remove the unnecessary add
operation in set function.

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-04 22:45:13 -05:00
David Howells a4373a489e rxrpc: Don't try to map ICMP to error as the lower layer already did that
In the ICMP message processing code, don't try to map ICMP codes to UNIX
error codes as the caller (IPv4/IPv6) already did that for us (ee_errno).

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 16:02:03 +00:00
David Howells ab802ee0ab rxrpc: Clear the unused part of a sockaddr_rxrpc for memcmp() use
Clear the unused part of a sockaddr_rxrpc structs so that memcmp() can be
used to compare them.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:59:49 +00:00
David Howells 2b15ef15bc rxrpc: rxkad: Casts are needed when comparing be32 values
Forced casts are needed to avoid sparse warning when directly comparing
be32 values.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:59:13 +00:00
David Howells 098a20991d rxrpc: rxkad: The version number in the response should be net byte order
The version number rxkad places in the response should be network byte
order.

Whilst we're at it, rearrange the code to be more readable.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:59:00 +00:00
David Howells ee72b9fddb rxrpc: Use ACCESS_ONCE() when accessing circular buffer pointers
Use ACCESS_ONCE() when accessing the other-end pointer into a circular
buffer as it's possible the other-end pointer might change whilst we're
doing this, and if we access it twice, we might get some weird things
happening.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:58:06 +00:00
David Howells b4f1342f91 rxrpc: Adjust some whitespace and comments
Remove some excess whitespace, insert some missing spaces and adjust a
couple of comments.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:56:19 +00:00
David Howells 351c1e6486 rxrpc: Be more selective about the types of received packets we accept
Currently, received RxRPC packets outside the range 1-13 are rejected.
There are, however, holes in the range that should also be rejected - plus
at least one type we don't yet support - so reject these also.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:56:06 +00:00
David Howells ee6fe085a9 rxrpc: Fix defined range for /proc/sys/net/rxrpc/rx_mtu
The upper bound of the defined range for rx_mtu is being set in the same
member as the lower bound (extra1) rather than the correct place (extra2).
I'm not entirely sure why this compiles.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:55:32 +00:00
David Howells e33b3d97bc rxrpc: The protocol family should be set to PF_RXRPC not PF_UNIX
Fix the protocol family set in the proto_ops for rxrpc to be PF_RXRPC not
PF_UNIX.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:54:27 +00:00
David Howells 0d12f8a402 rxrpc: Keep the skb private record of the Rx header in host byte order
Currently, a copy of the Rx packet header is copied into the the sk_buff
private data so that we can advance the pointer into the buffer,
potentially discarding the original.  At the moment, this copy is held in
network byte order, but this means we're doing a lot of unnecessary
translations.

The reasons it was done this way are that we need the values in network
byte order occasionally and we can use the copy, slightly modified, as part
of an iov array when sending an ack or an abort packet.

However, it seems more reasonable on review that it would be better kept in
host byte order and that we make up a new header when we want to send
another packet.

To this end, rename the original header struct to rxrpc_wire_header (with
BE fields) and institute a variant called rxrpc_host_header that has host
order fields.  Change the struct in the sk_buff private data into an
rxrpc_host_header and translate the values when filling it in.

This further allows us to keep values kept in various structures in host
byte order rather than network byte order and allows removal of some fields
that are byteswapped duplicates.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:53:46 +00:00
David Howells 4c198ad17a rxrpc: Rename call events to begin RXRPC_CALL_EV_
Rename call event names to begin RXRPC_CALL_EV_ to distinguish them from the
flags.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:53:46 +00:00
David Howells 5b8848d149 rxrpc: Convert call flag and event numbers into enums
Convert call flag and event numbers into enums and move their definitions
outside of the struct.

Also move the call state enum outside of the struct and add an extra
element to count the number of states.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:53:46 +00:00
David Howells e721498a63 rxrpc: Fix a case where a call event bit is being used as a flag bit
Fix a case where RXRPC_CALL_RELEASE (an event) is being used to specify a
flag bit.  RXRPC_CALL_RELEASED should be used instead.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-03-04 15:53:46 +00:00