This reverts commit 0c85a7e874.
The games with 'rm' are on (two separate instances) of a local variable,
and make no difference.
Quoting Aditya Pakki:
"I was the author of the patch and it was the cause of the giant UMN
revert.
The patch is garbage and I was unaware of the steps involved in
retracting it. I *believed* the maintainers would pull it, given it
was already under Greg's list. The patch does not introduce any bugs
but is pointless and is stupid. I accept my incompetence and for not
requesting a revert earlier."
Link: https://lwn.net/Articles/854319/
Requested-by: Aditya Pakki <pakki001@umn.edu>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When I added support to allow generic netlink multicast groups to be
restricted to subscribers with CAP_NET_ADMIN I was unaware that a
genl_bind implementation already existed in the past.
It was reverted due to ABBA deadlock:
1. ->netlink_bind gets called with the table lock held.
2. genetlink bind callback is invoked, it grabs the genl lock.
But when a new genl subsystem is (un)registered, these two locks are
taken in reverse order.
One solution would be to revert again and add a comment in genl
referring 1e82a62fec, "genetlink: remove genl_bind").
This would need a second change in mptcp to not expose the raw token
value anymore, e.g. by hashing the token with a secret key so userspace
can still associate subflow events with the correct mptcp connection.
However, Paolo Abeni reminded me to double-check why the netlink table is
locked in the first place.
I can't find one. netlink_bind() is already called without this lock
when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt.
Same holds for the netlink_unbind operation.
Digging through the history, commit f773608026
("netlink: access nlk groups safely in netlink bind and getname")
expanded the lock scope.
commit 3a20773bee ("net: netlink: cap max groups which will be considered in netlink_bind()")
... removed the nlk->ngroups access that the lock scope
extension was all about.
Reduce the lock scope again and always call ->netlink_bind without
the table lock.
The Fixes tag should be vs. the patch mentioned in the link below,
but that one got squash-merged into the patch that came earlier in the
series.
Fixes: 4d54cc3211 ("mptcp: avoid lock_fast usage in accept path")
Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Sean Tranchetti <stranche@codeaurora.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The intention was for pause statistics to not be reported
when driver does not have the relevant callback (only
report an empty netlink nest). What happens currently
we report all 0s instead. Make sure statistics are
initialized to "not set" (which is -1) so the dumping
code skips them.
Fixes: 9a27a33027 ("ethtool: add standard pause stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 0f6925b3e8 ("virtio_net: Do not pull payload in skb->head")
Guenter Roeck reported one failure in his tests using sh architecture.
After much debugging, we have been able to spot silent unaligned accesses
in inet_gro_receive()
The issue at hand is that upper networking stacks assume their header
is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN
bytes before the Ethernet header to make that happen.
This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path
if the fragment is not properly aligned.
Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN
as 0, this extra check will be a NOP for them.
Note that if frag0 is not used, GRO will call pskb_may_pull()
as many times as needed to pull network and transport headers.
Fixes: 0f6925b3e8 ("virtio_net: Do not pull payload in skb->head")
Fixes: 78a478d0ef ("gro: Inline skb_gro_header and cache frag0 virtual address")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock
held and sp->do_auto_asconf is true, then an element is removed
from the auto_asconf_splist without any proper locking.
This can happen in the following functions:
1. In sctp_accept, if sctp_sock_migrate fails.
2. In inet_create or inet6_create, if there is a bpf program
attached to BPF_CGROUP_INET_SOCK_CREATE which denies
creation of the sctp socket.
The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock
instead of sctp_close.
This addresses CVE-2021-23133.
Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Fixes: 6102365876 ("bpf: Add new cgroup attach type to enable sock modifications")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tcp_allowed_congestion_control is global and writable;
writing to it in any net namespace will leak into all other net
namespaces.
tcp_available_congestion_control and tcp_allowed_congestion_control are
the only sysctls in ipv4_net_table (the per-netns sysctl table) with a
NULL data pointer; their handlers (proc_tcp_available_congestion_control
and proc_allowed_congestion_control) have no other way of referencing a
struct net. Thus, they operate globally.
Because ipv4_net_table does not use designated initializers, there is no
easy way to fix up this one "bad" table entry. However, the data pointer
updating logic shouldn't be applied to NULL pointers anyway, so we
instead force these entries to be read-only.
These sysctls used to exist in ipv4_table (init-net only), but they were
moved to the per-net ipv4_net_table, presumably without realizing that
tcp_allowed_congestion_control was writable and thus introduced a leak.
Because the intent of that commit was only to know (i.e. read) "which
congestion algorithms are available or allowed", this read-only solution
should be sufficient.
The logic added in recent commit
31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls")
does not and cannot check for NULL data pointers, because
other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have
.data=NULL but use other methods (.extra2) to access the struct net.
Fixes: 9cb8e048e5 ("net/ipv4/sysctl: show tcp_{allowed, available}_congestion_control in non-initial netns")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to the sit case, we need to remove the tunnels with no
addresses that have been moved to another network namespace.
Fixes: 0bd8762824 ("ip6tnl: add x-netns support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sit interface created without a local or a remote address is linked
into the `sit_net::tunnels_wc` list of its original namespace. When
deleting a network namespace, delete the devices that have been moved.
The following script triggers a null pointer dereference if devices
linked in a deleted `sit_net` remain:
for i in `seq 1 30`; do
ip netns add ns-test
ip netns exec ns-test ip link add dev veth0 type veth peer veth1
ip netns exec ns-test ip link add dev sit$i type sit dev veth0
ip netns exec ns-test ip link set dev sit$i netns $$
ip netns del ns-test
done
for i in `seq 1 30`; do
ip link del dev sit$i
done
Fixes: 5e6700b3bf ("sit: add support of x-netns")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix NAT IPv6 offload in the flowtable.
2) icmpv6 is printed as unknown in /proc/net/nf_conntrack.
3) Use div64_u64() in nft_limit, from Eric Dumazet.
4) Use pre_exit to unregister ebtables and arptables hooks,
from Florian Westphal.
5) Fix out-of-bound memset in x_tables compat match/target,
also from Florian.
6) Clone set elements expression to ensure proper initialization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
xt_compat_match/target_from_user doesn't check that zeroing the area
to start of next rule won't write past end of allocated ruleset blob.
Remove this code and zero the entire blob beforehand.
Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com
Reported-by: Andy Nguyen <theflow@google.com>
Fixes: 9fa492cdc1 ("[NETFILTER]: x_tables: simplify compat API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add missing 't' in attrtype.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.
Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.
The per-net hook unregister function uses call_rcu instead.
Fixes: b9e69e1273 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.
Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.
Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().
Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.
This can only happens on module removal, not during netns exit.
The new function expects the table name, not the table struct.
This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.
The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.
Fixes: aee12a0a37 ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.
If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.
This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.
This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.
v1 -> v2:
- let the main napi_thread_poll() loop clear the SCHED bit
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 29863d41bb ("net: implement threaded-able napi poll loop support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.
CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-04-08
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 31 insertions(+), 10 deletions(-).
The main changes are:
1) Validate and reject invalid JIT branch displacements, from Piotr Krysiuk.
2) Fix incorrect unhash restore as well as fwd_alloc memory accounting in
sock map, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* S1G beacon validation
* potential leak in nl80211
* fast-RX confusion with 4-addr mode
* erroneous WARN_ON that userspace can trigger
* wrong time units in virt_wifi
* rfkill userspace API breakage
* TXQ AC confusing that led to traffic stopped forever
* connection monitoring time after/before confusion
* netlink beacon head validation buffer overrun
-----BEGIN PGP SIGNATURE-----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=rGEc
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-04-08.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes berg says:
====================
Various small fixes:
* S1G beacon validation
* potential leak in nl80211
* fast-RX confusion with 4-addr mode
* erroneous WARN_ON that userspace can trigger
* wrong time units in virt_wifi
* rfkill userspace API breakage
* TXQ AC confusing that led to traffic stopped forever
* connection monitoring time after/before confusion
* netlink beacon head validation buffer overrun
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.
This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.
Reproduction:
$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1
action order 0: Simple <"2">
index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple 20480 -1
Fix the issue by modifying module reference counting handling in action
initialization code:
- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.
- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.
- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.
Fixes: d349f99768 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Action init code increments reference counter when it changes an action.
This is the desired behavior for cls API which needs to obtain action
reference for every classifier that points to action. However, act API just
needs to change the action and releases the reference before returning.
This sequence breaks when the requested action doesn't exist, which causes
act API init code to create new action with specified index, but action is
still released before returning and is deleted (unless it was referenced
concurrently by cls API).
Reproduction:
$ sudo tc actions ls action gact
$ sudo tc actions change action gact drop index 1
$ sudo tc actions ls action gact
Extend tcf_action_init() to accept 'init_res' array and initialize it with
action->ops->init() result. In tcf_action_add() remove pointers to created
actions from actions array before passing it to tcf_action_put_many().
Fixes: cae422f379 ("net: sched: use reference counting action init")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6855e8213e.
Following commit in series fixes the issue without introducing regression
in error rollback of tcf_action_destroy().
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the beacon head attribute (NL80211_ATTR_BEACON_HEAD)
is too short to even contain the frame control field,
we access uninitialized data beyond the buffer. Fix this
by checking the minimal required size first. We used to
do this until S1G support was added, where the fixed
data portion has a different size.
Reported-and-tested-by: syzbot+72b99dcf4607e8c770f3@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 1d47f1198d ("nl80211: correctly validate S1G beacon head")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210408154518.d9b06d39b4ee.Iff908997b2a4067e8d456b3cb96cab9771d252b8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A WARN_ON(wdev->conn) would trigger in cfg80211_sme_connect(), if multiple
send_msg(NL80211_CMD_CONNECT) system calls are made from the userland, which
should be anticipated and handled by the wireless driver. Remove this WARN_ON()
to prevent kernel panic if kernel is configured to "panic_on_warn".
Bug reported by syzbot.
Reported-by: syzbot+5f9392825de654244975@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210407162756.6101-1-ducheng2@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The incorrect timeout check caused probing to happen when it did
not need to happen. This in turn caused tx performance drop
for around 5 seconds in ath10k-ct driver. Possibly that tx drop
is due to a secondary issue, but fixing the probe to not happen
when traffic is running fixes the symptom.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Fixes: 9abf4e4983 ("mac80211: optimize station connection monitor")
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210330230749.14097-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Normally, TXQs have
txq->tid = tid;
txq->ac = ieee80211_ac_from_tid(tid);
However, the special management TXQ actually has
txq->tid = IEEE80211_NUM_TIDS; // 16
txq->ac = IEEE80211_AC_VO;
This makes sense, but ieee80211_ac_from_tid(16) is the same
as ieee80211_ac_from_tid(0) which is just IEEE80211_AC_BE.
Now, normally this is fine. However, if the netdev queues
were stopped, then the code in ieee80211_tx_dequeue() will
propagate the stop from the interface (vif->txqs_stopped[])
if the AC 2 (ieee80211_ac_from_tid(txq->tid)) is marked as
stopped. On wake, however, __ieee80211_wake_txqs() will wake
the TXQ if AC 0 (txq->ac) is woken up.
If a driver stops all queues with ieee80211_stop_tx_queues()
and then wakes them again with ieee80211_wake_tx_queues(),
the ieee80211_wake_txqs() tasklet will run to resync queue
and TXQ state. If all queues were woken, then what'll happen
is that _ieee80211_wake_txqs() will run in order of HW queues
0-3, typically (and certainly for iwlwifi) corresponding to
ACs 0-3, so it'll call __ieee80211_wake_txqs() for each AC in
order 0-3.
When __ieee80211_wake_txqs() is called for AC 0 (VO) that'll
wake up the management TXQ (remember its tid is 16), and the
driver's wake_tx_queue() will be called. That tries to get a
frame, which will immediately *stop* the TXQ again, because
now we check against AC 2, and AC 2 hasn't yet been marked as
woken up again in sdata->vif.txqs_stopped[] since we're only
in the __ieee80211_wake_txqs() call for AC 0.
Thus, the management TXQ will never be started again.
Fix this by checking txq->ac directly instead of calculating
the AC as ieee80211_ac_from_tid(txq->tid).
Fixes: adf8ed01e4 ("mac80211: add an optional TXQ for other PS-buffered frames")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20210323210500.bf4d50afea4a.I136ffde910486301f8818f5442e3c9bf8670a9c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Recompiling with the new extended version of struct rfkill_event
broke systemd in *two* ways:
- It used "sizeof(struct rfkill_event)" to read the event, but
then complained if it actually got something != 8, this broke
it on new kernels (that include the updated API);
- It used sizeof(struct rfkill_event) to write a command, but
didn't implement the intended expansion protocol where the
kernel returns only how many bytes it accepted, and errored
out due to the unexpected smaller size on kernels that didn't
include the updated API.
Even though systemd has now been fixed, that fix may not be always
deployed, and other applications could potentially have similar
issues.
As such, in the interest of avoiding regressions, revert the
default API "struct rfkill_event" back to the original size.
Instead, add a new "struct rfkill_event_ext" that extends it by
the new field, and even more clearly document that applications
should be prepared for extensions in two ways:
* write might only accept fewer bytes on older kernels, and
will return how many to let userspace know which data may
have been ignored;
* read might return anything between 8 (the original size) and
whatever size the application sized its buffer at, indicating
how much event data was supported by the kernel.
Perhaps that will help avoid such issues in the future and we
won't have to come up with another version of the struct if we
ever need to extend it again.
Applications that want to take advantage of the new field will
have to be modified to use struct rfkill_event_ext instead now,
which comes with the danger of them having already been updated
to use it from 'struct rfkill_event', but I found no evidence
of that, and it's still relatively new.
Cc: stable@vger.kernel.org # 5.11
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-r4 (x86-64)
Link: https://lore.kernel.org/r/20210319232510.f1a139cfdd9c.Ic5c7c9d1d28972059e132ea653a21a427c326678@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some race conditions, with more clients and traffic configuration,
below crash is seen when making the interface down. sta->fast_rx wasn't
cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is
due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev)
which has been deleted already.
Resolve this by clearing sta->fast_rx pointer when STA removes
from a 4-addr VLAN.
[ 239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 239.449531] pgd = 80204000
...
[ 239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227
[ 239.481591] Hardware name: Generic DT based system
[ 239.487665] task: be05b700 ti: be08e000 task.ti: be08e000
[ 239.492360] PC is at get_rps_cpu+0x2d4/0x31c
[ 239.497823] LR is at 0xbe08fc54
...
[ 239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac)
[ 239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4)
[ 239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211])
[ 239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8
0211])
[ 239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k])
[ 239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k])
[ 239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb]
)
[ 239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c)
[ 239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228)
[ 239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108)
[ 239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4)
[ 239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94)
[ 239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74)
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2021-04-07
An update from ieee802154 for your *net* tree.
Most of these are coming from the flood of syzkaller reports
lately got for the ieee802154 subsystem. There are likely to
come more for this, but this is a good batch to get out for now.
Alexander Aring created a patchset to avoid llsec handling on a
monitor interface, which we do not support.
Alex Shi removed a unused macro.
Pavel Skripkin fixed another protection fault found by syzkaller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lanes field is missing for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT
link mode and it causes a failure when trying to set
'speed 10000 lanes 1' on Spectrum-2 machines when autoneg is set to on.
Add the lanes parameter for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT
link mode.
Fixes: c8907043c6 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers clear the 'ethtool_link_ksettings' struct in their
get_link_ksettings() callback, before populating it with actual values.
Such drivers will set the new 'link_mode' field to zero, resulting in
user space receiving wrong link mode information given that zero is a
valid value for the field.
Another problem is that some drivers (notably tun) can report random
values in the 'link_mode' field. This can result in a general protection
fault when the field is used as an index to the 'link_mode_params' array
[1].
This happens because such drivers implement their set_link_ksettings()
callback by simply overwriting their private copy of
'ethtool_link_ksettings' struct with the one they get from the stack,
which is not always properly initialized.
Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings'
and instead have drivers call ethtool_params_from_link_mode() with the
current link mode. The function will derive the link parameters (e.g.,
speed) from the link mode and fill them in the 'ethtool_link_ksettings'
struct.
v3:
* Remove link_mode parameter and derive the link parameters in
the driver instead of passing link_mode parameter to ethtool
and derive it there.
v2:
* Introduce 'cap_link_mode_supported' instead of adding a
validity field to 'ethtool_link_ksettings' struct.
[1]
general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967]
CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446
Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03
+38 d0 7c 08 84 d2 0f 85 b9
RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000
RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960
RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f
R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000
R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210
FS: 0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37
ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586
ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656
ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620
dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842
dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440
sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
sock_ioctl+0x477/0x6a0 net/socket.c:1177
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: c8907043c6 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These patches fix a series of spelling errors in net/tipc module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reset MAC header in HSR Tx path. This is needed, because direct packet
transmission, e.g. by specifying PACKET_QDISC_BYPASS does not reset the MAC
header.
This has been observed using the following setup:
|$ ip link add name hsr0 type hsr slave1 lan0 slave2 lan1 supervision 45 version 1
|$ ifconfig hsr0 up
|$ ./test hsr0
The test binary is using mmap'ed sockets and is specifying the
PACKET_QDISC_BYPASS socket option.
This patch resolves the following warning on a non-patched kernel:
|[ 112.725394] ------------[ cut here ]------------
|[ 112.731418] WARNING: CPU: 1 PID: 257 at net/hsr/hsr_forward.c:560 hsr_forward_skb+0x484/0x568
|[ 112.739962] net/hsr/hsr_forward.c:560: Malformed frame (port_src hsr0)
The warning can be safely removed, because the other call sites of
hsr_forward_skb() make sure that the skb is prepared correctly.
Fixes: d346a3fae3 ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of rs failure in rds_send_remove_from_sock(), the 'rm' resource
is freed and later under spinlock, causing potential use-after-free.
Set the free pointer to NULL to avoid undefined behavior.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The member 'tx_lpi_timer' is defined with __u32 datatype in the ethtool
header file. Hence, we should use ethnl_update_u32() in set_eee ops.
Fixes: fd77be7bd4 ("ethtool: set EEE settings with EEE_SET request")
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Incorrect accounting fwd_alloc can result in a warning when the socket
is torn down,
[18455.319240] WARNING: CPU: 0 PID: 24075 at net/core/stream.c:208 sk_stream_kill_queues+0x21f/0x230
[...]
[18455.319543] Call Trace:
[18455.319556] inet_csk_destroy_sock+0xba/0x1f0
[18455.319577] tcp_rcv_state_process+0x1b4e/0x2380
[18455.319593] ? lock_downgrade+0x3a0/0x3a0
[18455.319617] ? tcp_finish_connect+0x1e0/0x1e0
[18455.319631] ? sk_reset_timer+0x15/0x70
[18455.319646] ? tcp_schedule_loss_probe+0x1b2/0x240
[18455.319663] ? lock_release+0xb2/0x3f0
[18455.319676] ? __release_sock+0x8a/0x1b0
[18455.319690] ? lock_downgrade+0x3a0/0x3a0
[18455.319704] ? lock_release+0x3f0/0x3f0
[18455.319717] ? __tcp_close+0x2c6/0x790
[18455.319736] ? tcp_v4_do_rcv+0x168/0x370
[18455.319750] tcp_v4_do_rcv+0x168/0x370
[18455.319767] __release_sock+0xbc/0x1b0
[18455.319785] __tcp_close+0x2ee/0x790
[18455.319805] tcp_close+0x20/0x80
This currently happens because on redirect case we do skb_set_owner_r()
with the original sock. This increments the fwd_alloc memory accounting
on the original sock. Then on redirect we may push this into the queue
of the psock we are redirecting to. When the skb is flushed from the
queue we give the memory back to the original sock. The problem is if
the original sock is destroyed/closed with skbs on another psocks queue
then the original sock will not have a way to reclaim the memory before
being destroyed. Then above warning will be thrown
sockA sockB
sk_psock_strp_read()
sk_psock_verdict_apply()
-- SK_REDIRECT --
sk_psock_skb_redirect()
skb_queue_tail(psock_other->ingress_skb..)
sk_close()
sock_map_unref()
sk_psock_put()
sk_psock_drop()
sk_psock_zap_ingress()
At this point we have torn down our own psock, but have the outstanding
skb in psock_other. Note that SK_PASS doesn't have this problem because
the sk_psock_drop() logic releases the skb, its still associated with
our psock.
To resolve lets only account for sockets on the ingress queue that are
still associated with the current socket. On the redirect case we will
check memory limits per 6fa9201a89, but will omit fwd_alloc accounting
until skb is actually enqueued. When the skb is sent via skb_send_sock_locked
or received with sk_psock_skb_ingress memory will be claimed on psock_other.
Fixes: 6fa9201a89 ("bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/161731444013.68884.4021114312848535993.stgit@john-XPS-13-9370
Li Shuang found a NULL pointer dereference crash in her testing:
[] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[] RIP: 0010:tipc_crypto_rcv_complete+0xc8/0x7e0 [tipc]
[] Call Trace:
[] <IRQ>
[] tipc_crypto_rcv+0x2d9/0x8f0 [tipc]
[] tipc_rcv+0x2fc/0x1120 [tipc]
[] tipc_udp_recv+0xc6/0x1e0 [tipc]
[] udpv6_queue_rcv_one_skb+0x16a/0x460
[] udp6_unicast_rcv_skb.isra.35+0x41/0xa0
[] ip6_protocol_deliver_rcu+0x23b/0x4c0
[] ip6_input+0x3d/0xb0
[] ipv6_rcv+0x395/0x510
[] __netif_receive_skb_core+0x5fc/0xc40
This is caused by NULL returned by tipc_aead_get(), and then crashed when
dereferencing it later in tipc_crypto_rcv_complete(). This might happen
when tipc_crypto_rcv_complete() is called by two threads at the same time:
the tmp attached by tipc_crypto_key_attach() in one thread may be released
by the one attached by that in the other thread.
This patch is to fix it by incrementing the tmp's refcnt before attaching
it instead of calling tipc_aead_get() after attaching it.
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot found general protection fault in crypto_destroy_tfm()[1].
It was caused by wrong clean up loop in llsec_key_alloc().
If one of the tfm array members is in IS_ERR() range it will
cause general protection fault in clean up function [1].
Call Trace:
crypto_free_aead include/crypto/aead.h:191 [inline] [1]
llsec_key_alloc net/mac802154/llsec.c:156 [inline]
mac802154_llsec_key_add+0x9e0/0xcc0 net/mac802154/llsec.c:249
ieee802154_add_llsec_key+0x56/0x80 net/mac802154/cfg.c:338
rdev_add_llsec_key net/ieee802154/rdev-ops.h:260 [inline]
nl802154_add_llsec_key+0x3d3/0x560 net/ieee802154/nl802154.c:1584
genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210304152125.1052825-1-paskripkin@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This patch forbids to add llsec seclevel for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-14-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This patch stops dumping llsec seclevels for monitors which we don't
support yet. Otherwise we will access llsec mib which isn't initialized
for monitors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-13-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This patch forbids to del llsec devkey for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-12-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This patch forbids to add llsec devkey for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-11-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This patch stops dumping llsec devkeys for monitors which we don't support
yet. Otherwise we will access llsec mib which isn't initialized for
monitors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-10-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This patch forbids to del llsec dev for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-9-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Linus Torvalds