An upper dir is marked "impure" to let ovl_iterate() know that this
directory may contain non pure upper entries whose d_ino may need to be
read from the origin inode.
We already mark a non-merge dir "impure" when moving a non-pure child
entry inside it, to let ovl_iterate() know not to iterate the non-merge
dir directly.
Mark also a merge dir "impure" when moving a non-pure child entry inside
it and when copying up a child entry inside it.
This can be used to optimize ovl_iterate() to perform a "pure merge" of
upper and lower directories, merging the content of the directories,
without having to read d_ino from origin inodes.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Sometimes it is interesting to know if an upper file is pure upper or a
copy up target, and if it is a copy up target, it may be interesting to
find the copy up origin.
This will be used to preserve lower inode numbers across copy up.
Store the lower inode file handle in upper inode extended attribute
overlay.origin on copy up to use it later for these cases. Store the lower
filesystem uuid along side the file handle, so we can validate that we are
looking for the origin file in the original fs.
If lower fs does not support NFS export ops store a zero sized xattr so we
can always use the overlay.origin xattr to distinguish between a copy up
and a pure upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull overlayfs updates from Miklos Szeredi:
"Because copy up can take a long time, serialized copy ups could be a
big performance bottleneck. This update allows concurrent copy up of
regular files eliminating this potential problem.
There are also minor fixes"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: drop CAP_SYS_RESOURCE from saved mounter's credentials
ovl: properly implement sync_filesystem()
ovl: concurrent copy up of regular files
ovl: introduce copy up waitqueue
ovl: copy up regular file using O_TMPFILE
ovl: rearrange code in ovl_copy_up_locked()
ovl: check if upperdir fs supports O_TMPFILE
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that copy up of regular file is done using O_TMPFILE,
we don't need to hold rename_lock throughout copy up.
Use the copy up waitqueue to synchronize concurrent copy up
of the same file. Different regular files can be copied up
concurrently.
The upper dir inode_lock is taken instead of rename_lock,
because it is needed for lookup and later for linking the
temp file, but it is released while copying up data.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In preparation for concurrent copy up, implement copy up
of regular file as O_TMPFILE that is linked to upperdir
instead of a file in workdir that is moved to upperdir.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As preparation to implementing copy up with O_TMPFILE,
name the variable for dentry before final rename 'temp' and
assign it to 'newdentry' only after rename.
Also lookup upper dentry before looking up temp dentry and
move ovl_set_timestamps() into ovl_copy_up_locked(), because
that is going to be more convenient for upcoming change.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull overlayfs updates from Miklos Szeredi:
"This update contains:
- try to clone on copy-up
- allow renaming a directory
- split source into managable chunks
- misc cleanups and fixes
It does not contain the read-only fd data inconsistency fix, which Al
didn't like. I'll leave that to the next year..."
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (36 commits)
ovl: fix reStructuredText syntax errors in documentation
ovl: fix return value of ovl_fill_super
ovl: clean up kstat usage
ovl: fold ovl_copy_up_truncate() into ovl_copy_up()
ovl: create directories inside merged parent opaque
ovl: opaque cleanup
ovl: show redirect_dir mount option
ovl: allow setting max size of redirect
ovl: allow redirect_dir to default to "on"
ovl: check for emptiness of redirect dir
ovl: redirect on rename-dir
ovl: lookup redirects
ovl: consolidate lookup for underlying layers
ovl: fix nested overlayfs mount
ovl: check namelen
ovl: split super.c
ovl: use d_is_dir()
ovl: simplify lookup
ovl: check lower existence of rename target
ovl: rename: simplify handling of lower/merged directory
...
FWIW, there's a bit of abuse of struct kstat in overlayfs object
creation paths - for one thing, it ends up with a very small subset
of struct kstat (mode + rdev), for another it also needs link in
case of symlinks and ends up passing it separately.
IMO it would be better to introduce a separate object for that.
In principle, we might even lift that thing into general API and switch
->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell
knows, perhaps ->create() as well...
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
oe->opaque is set for
a) whiteouts
b) directories having the "trusted.overlay.opaque" xattr
Case b can be simplified, since setting the xattr always implies setting
oe->opaque. Also once set, the opaque flag is never cleared.
Don't need to set opaque flag for non-directories.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Current code returns EXDEV when a directory would need to be copied up to
move. We could copy up the directory tree in this case, but there's
another, simpler solution: point to old lower directory from moved upper
directory.
This is achieved with a "trusted.overlay.redirect" xattr storing the path
relative to the root of the overlay. After such attribute has been set,
the directory can be moved without further actions required.
This is a backward incompatible feature, old kernels won't be able to
correctly mount an overlay containing redirected directories.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When copying up within the same fs, try to use vfs_clone_file_range().
This is very efficient when lower and upper are on the same fs
with file reflink support. If vfs_clone_file_range() fails for any
reason, copy up falls back to the regular data copy code.
Tested correct behavior when lower and upper are on:
1. same ext4 (copy)
2. same xfs + reflink patches + mkfs.xfs (copy)
3. same xfs + reflink patches + mkfs.xfs -m reflink=1 (reflink)
4. different xfs + reflink patches + mkfs.xfs -m reflink=1 (copy)
For comparison, on my laptop, xfstest overlay/001 (copy up of large
sparse files) takes less than 1 second in the xfs reflink setup vs.
25 seconds on the rest of the setups.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Make sure the copied up file hits the disk before renaming to the final
destination. If this is not done then the copy-up may corrupt the data in
the file in case of a crash.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Pull overlayfs updates from Miklos Szeredi:
"This update contains fixes to the "use mounter's permission to access
underlying layers" area, and miscellaneous other fixes and cleanups.
No new features this time"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: use vfs_get_link()
vfs: add vfs_get_link() helper
ovl: use generic_readlink
ovl: explain error values when removing acl from workdir
ovl: Fix info leak in ovl_lookup_temp()
ovl: during copy up, switch to mounter's creds early
ovl: lookup: do getxattr with mounter's permission
ovl: copy_up_xattr(): use strnlen
Resulting in a complete removal of a function basically implementing the
inverse of vfs_readlink().
As a bonus, now the proper security hook is also called.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
Right now, various places in the kernel check for the existence of
getxattr, setxattr, and removexattr inode operations and directly call
those operations. Switch to helper functions and test for the IOP_XATTR
flag instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull security subsystem updates from James Morris:
SELinux/LSM:
- overlayfs support, necessary for container filesystems
LSM:
- finally remove the kernel_module_from_file hook
Smack:
- treat signal delivery as an 'append' operation
TPM:
- lots of bugfixes & updates
Audit:
- new audit data type: LSM_AUDIT_DATA_FILE
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (47 commits)
Revert "tpm/tpm_crb: implement tpm crb idle state"
Revert "tmp/tpm_crb: fix Intel PTT hw bug during idle state"
Revert "tpm/tpm_crb: open code the crb_init into acpi_add"
Revert "tmp/tpm_crb: implement runtime pm for tpm_crb"
lsm,audit,selinux: Introduce a new audit data type LSM_AUDIT_DATA_FILE
tmp/tpm_crb: implement runtime pm for tpm_crb
tpm/tpm_crb: open code the crb_init into acpi_add
tmp/tpm_crb: fix Intel PTT hw bug during idle state
tpm/tpm_crb: implement tpm crb idle state
tpm: add check for minimum buffer size in tpm_transmit()
tpm: constify TPM 1.x header structures
tpm/tpm_crb: fix the over 80 characters checkpatch warring
tpm/tpm_crb: drop useless cpu_to_le32 when writing to registers
tpm/tpm_crb: cache cmd_size register value.
tmp/tpm_crb: drop include to platform_device
tpm/tpm_tis: remove unused itpm variable
tpm_crb: fix incorrect values of cmdReady and goIdle bits
tpm_crb: refine the naming of constants
tpm_crb: remove wmb()'s
tpm_crb: fix crb_req_canceled behavior
...
Now, we have the notion that copy up of a file is done with the creds
of mounter of overlay filesystem (as opposed to task). Right now before
we switch creds, we do some vfs_getattr() operations in the context of
task and that itself can fail. We should do that getattr() using the
creds of mounter instead.
So this patch switches to mounter's creds early during copy up process so
that even vfs_getattr() is done with mounter's creds.
Do not call revert_creds() unless we have already called
ovl_override_creds(). [Reported by Arnd Bergmann]
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Be defensive about what underlying fs provides us in the returned xattr
list buffer. strlen() may overrun the buffer, so use strnlen() and WARN if
the contents are not properly null terminated.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Provide a security hook which is called when xattrs of a file are being
copied up. This hook is called once for each xattr and LSM can return
0 if the security module wants the xattr to be copied up, 1 if the
security module wants the xattr to be discarded on the copy, -EOPNOTSUPP
if the security module does not handle/manage the xattr, or a -errno
upon an error.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: whitespace cleanup for checkpatch.pl]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Provide a security hook to label new file correctly when a file is copied
up from lower layer to upper layer of a overlay/union mount.
This hook can prepare a new set of creds which are suitable for new file
creation during copy up. Caller will use new creds to create file and then
revert back to old creds and release new creds.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: whitespace cleanup to appease checkpatch.pl]
Signed-off-by: Paul Moore <paul@paul-moore.com>
When a copy up of a directory occurs which has the opaque xattr set, the
xattr remains in the upper directory. The immediate behavior with overlayfs
is that the upper directory is not treated as opaque, however after a
remount the opaque flag is used and upper directory is treated as opaque.
This causes files created in the lower layer to be hidden when using
multiple lower directories.
Fix by not copying up the opaque flag.
To reproduce:
----8<---------8<---------8<---------8<---------8<---------8<----
mkdir -p l/d/s u v w mnt
mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt
rm -rf mnt/d/
mkdir -p mnt/d/n
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
touch mnt/d/foo
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
ls mnt/d
----8<---------8<---------8<---------8<---------8<---------8<----
output should be: "foo n"
Reported-by: Derek McGowan <dmcg@drizz.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
To get from overlay inode to real inode we currently use 'struct
ovl_entry', which has lifetime connected to overlay dentry. This is okay,
since each overlay dentry had a new overlay inode allocated.
Following patch will break that assumption, so need to leave out ovl_entry.
This patch stores the real inode directly in i_private, with the lowest bit
used to indicate whether the inode is upper or lower.
Lifetime rules remain, using ovl_inode_real() must only be done while
caller holds ref on overlay dentry (and hence on real dentry), or within
RCU protected regions.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In user namespace the whiteout creation fails with -EPERM because the
current process isn't capable(CAP_SYS_ADMIN) when setting xattr.
A simple reproducer:
$ mkdir upper lower work merged lower/dir
$ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
$ unshare -m -p -f -U -r bash
Now as root in the user namespace:
\# touch merged/dir/{1,2,3} # this will force a copy up of lower/dir
\# rm -fR merged/*
This ends up failing with -EPERM after the files in dir has been
correctly deleted:
unlinkat(4, "2", 0) = 0
unlinkat(4, "1", 0) = 0
unlinkat(4, "3", 0) = 0
close(4) = 0
unlinkat(AT_FDCWD, "merged/dir", AT_REMOVEDIR) = -1 EPERM (Operation not
permitted)
Interestingly, if you don't place files in merged/dir you can remove it,
meaning if upper/dir does not exist, creating the char device file works
properly in that same location.
This patch uses ovl_sb_creator_cred() to get the cred struct from the
superblock mounter and override the old cred with these new ones so that
the whiteout creation is possible because overlay is wrong in assuming that
the creds it will get with prepare_creds will be in the initial user
namespace. The old cap_raise game is removed in favor of just overriding
the old cred struct.
This patch also drops from ovl_copy_up_one() the following two lines:
override_cred->fsuid = stat->uid;
override_cred->fsgid = stat->gid;
This is because the correct uid and gid are taken directly with the stat
struct and correctly set with ovl_set_attr().
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch fixes a newline warning found by the checkpatch.pl tool
Signed-off-by: Sohom-Bhattacharjee <soham.bhattacharjee15@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Print a warning when overlayfs copies up a file if the process that
triggered the copy up has a R/O fd open to the lower file being copied up.
This can help catch applications that do things like the following:
fd1 = open("foo", O_RDONLY);
fd2 = open("foo", O_RDWR);
where they expect fd1 and fd2 to refer to the same file - which will no
longer be the case post-copy up.
With this patch, the following commands:
bash 5</mnt/a/foo128
6<>/mnt/a/foo128
assuming /mnt/a/foo128 to be an un-copied up file on an overlay will
produce the following warning in the kernel log:
overlayfs: Copying up foo129, but open R/O on fd 5 which will cease
to be coherent [pid=3818 bash]
This is enabled by setting:
/sys/module/overlay/parameters/check_copy_up
to 1.
The warnings are ratelimited and are also limited to one warning per file -
assuming the copy up completes in each case.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull overlayfs updates from Miklos Szeredi:
"This contains several bug fixes and a new mount option
'default_permissions' that allows read-only exported NFS
filesystems to be used as lower layer"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: check dentry positiveness in ovl_cleanup_whiteouts()
ovl: setattr: check permissions before copy-up
ovl: root: copy attr
ovl: move super block magic number to magic.h
ovl: use a minimal buffer in ovl_copy_xattr
ovl: allow zero size xattr
ovl: default permissions
Rather than always allocating the high-order XATTR_SIZE_MAX buffer
which is costly and prone to failure, only allocate what is needed and
realloc if necessary.
Fixes https://github.com/coreos/bugs/issues/489
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
When ovl_copy_xattr() encountered a zero size xattr no more xattrs were
copied and the function returned success. This is clearly not the desired
behavior.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
In ovl_copy_up_locked(), newdentry is leaked if the function exits through
out_cleanup as this just to out after calling ovl_cleanup() - which doesn't
actually release the ref on newdentry.
The out_cleanup segment should instead exit through out2 as certainly
newdentry leaks - and possibly upper does also, though this isn't caught
given the catch of newdentry.
Without this fix, something like the following is seen:
BUG: Dentry ffff880023e9eb20{i=f861,n=#ffff880023e82d90} still in use (1) [unmount of tmpfs tmpfs]
BUG: Dentry ffff880023ece640{i=0,n=bigfile} still in use (1) [unmount of tmpfs tmpfs]
when unmounting the upper layer after an error occurred in copyup.
An error can be induced by creating a big file in a lower layer with
something like:
dd if=/dev/zero of=/lower/a/bigfile bs=65536 count=1 seek=$((0xf000))
to create a large file (4.1G). Overlay an upper layer that is too small
(on tmpfs might do) and then induce a copy up by opening it writably.
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org> # v3.18+
Open the lower file with O_LARGEFILE in ovl_copy_up().
Pass O_LARGEFILE unconditionally in ovl_copy_up_data() as it's purely for
catching 32-bit userspace dealing with a file large enough that it'll be
mishandled if the application isn't aware that there might be an integer
overflow. Inside the kernel, there shouldn't be any problems.
Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org> # v3.18+
OpenWRT folks reported that overlayfs fails to mount if upper fs is full,
because workdir can't be created. Wordir creation can fail for various
other reasons too.
There's no reason that the mount itself should fail, overlayfs can work
fine without a workdir, as long as the overlay isn't modified.
So mount it read-only and don't allow remounting read-write.
Add a couple of WARN_ON()s for the impossible case of workdir being used
despite being read-only.
Reported-by: Bastian Bittorf <bittorf@bluebottle.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: <stable@vger.kernel.org> # v3.18+
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Amir Goldstein