Commit Graph

2251 Commits

Author SHA1 Message Date
Zhang Rui 152a4e630f ACPI: video: DMI workaround broken Acer 7720 BIOS enabling display brightness
http://bugzilla.kernel.org/show_bug.cgi?id=13121

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23 23:41:31 -04:00
Zhang Rui c8d72a5e76 ACPI: run ACPI device hot removal in kacpi_hotplug_wq
Now that new interface is available,
convert to using it rather than creating a new kernel thread.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23 23:39:57 -04:00
Zhao Yakui 86e437f077 ACPI: Add the reference count to avoid unloading ACPI video bus twice
Sometimes both acpi video and i915 driver are compiled as modules.
And there exists the strict dependency between the two drivers.
The acpi video bus will be unloaded in course of unloading the i915 driver.
If we unload the acpi video driver, then the kernel oops will be triggered.

Add the reference count to avoid unloading the ACPI video bus twice.
The reference count should be checked before unregistering the acpi video bus.
If the reference count is already zero, it won't unregister it again.
And after the acpi video bus is already unregistered, the reference count
will be set to zero.

http://bugzilla.kernel.org/show_bug.cgi?id=13396

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23 23:38:41 -04:00
Zhang Rui 35a7c64fbc ACPI: DMI to disable Vista compatibility on some Sony laptops
Linux claims Vista compatibility to the BIOS for a number of
reasons, but this brings hard lockup on some Sony laptops.

Disable Vista compatibility via DMI for these laptops unless
we can figure out what Vista is doing for this platform.
http://bugzilla.kernel.org/show_bug.cgi?id=12904

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23 23:32:47 -04:00
Zhang Rui c02256be79 ACPI: fix a deadlock in hotplug case
we used to run the hotplug code in keventd_wq.
But when hot removing the ACPI battery device,
power_supply_unregister invokes flush_scheduled_work.
This causes a deadlock. i.e
1. When dock is unplugged, all the hotplug code is run on kevent_wq.
2. the hotplug code removes all the child devices of dock device.
3. removing the child device may invoke flush_scheduled_work
4. flush_scheduled_work waits until all the work on kevent_wq to be
   finished, while this will never be true because the hotplug code
   is running on keventd_wq...

Introduce a new workqueue for hotplug in this patch.
http://bugzilla.kernel.org/show_bug.cgi?id=13533

Tested-by: Paul Martin <pm@debian.org>
Tested-by: Vojtech Gondzala <vojtech.gondzala@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23 23:23:14 -04:00
Zhang Rui 056c308d3e Show the physical device node of backlight class device.
Create symbol link from backlight class device to ACPI video device.

More and more laptops are shipped with multiple ACPI
video devices, while we export only one of them to userspace.

With this patch applied, we can know which ACPI video device
is used by "cat /sys/class/backlight/acpi_video0/device/path".

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-23 23:19:13 -04:00
Linus Torvalds 59ef7a83f1 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits)
  PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write
  PCI: Fix the NIU MSI-X problem in a better way
  PCI ASPM: remove get_root_port_link
  PCI ASPM: cleanup pcie_aspm_sanity_check
  PCI ASPM: remove has_switch field
  PCI ASPM: cleanup calc_Lx_latency
  PCI ASPM: cleanup pcie_aspm_get_cap_device
  PCI ASPM: cleanup clkpm checks
  PCI ASPM: cleanup __pcie_aspm_check_state_one
  PCI ASPM: cleanup initialization
  PCI ASPM: cleanup change input argument of aspm functions
  PCI ASPM: cleanup misc in struct pcie_link_state
  PCI ASPM: cleanup clkpm state in struct pcie_link_state
  PCI ASPM: cleanup latency field in struct pcie_link_state
  PCI ASPM: cleanup aspm state field in struct pcie_link_state
  PCI ASPM: fix typo in struct pcie_link_state
  PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
  PCI: remove redundant __msi_set_enable()
  PCI PM: consistently use type bool for wake enable variable
  x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded
  ...
2009-06-22 11:59:51 -07:00
Pallipadi, Venkatesh 7b768f07dc ACPI: pdc init related memory leak with physical CPU hotplug
arch_acpi_processor_cleanup_pdc() in x86 and ia64 results in memory allocated
for _PDC objects that is never freed and will cause memory leak in case of
physical CPU remove and add. Patch fixes the memory leak by freeing the
objects soon after _PDC is evaluated.

Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20 00:50:52 -04:00
Bjorn Helgaas 0705495d90 ACPI: pci_root: remove unused dev/fn information
We never use the PCI device & function number, so remove it to make
it clear that it's not needed.  Many PCI host bridges don't even
appear in config space, so it's meaningless to look at stuff from
_ADR, which doesn't exist in that case.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20 00:01:54 -04:00
Bjorn Helgaas c1aec83416 ACPI: pci_root: simplify list traversals
Using list_for_each_entry() makes traversing the root list easier.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20 00:01:53 -04:00
Bjorn Helgaas caf420c68a ACPI: pci_root: use driver data rather than list lookup
There's no need to search the list to find the acpi_pci_root
structure.  We saved it as device->driver_data when we added
the device.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20 00:01:53 -04:00
Bjorn Helgaas f5eebbe119 ACPI: pci_root: simplify acpi_pci_root_add() control flow
By looking up the segment & bus number earlier, we don't have to
worry about cleaning up if it fails.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20 00:01:52 -04:00
Bjorn Helgaas fbe2b31b4b ACPI: pci_root: check _CRS, then _BBN for downstream bus number
To find a host bridge's downstream bus number, we currently look at _BBN
first.  If _BBN returns a bus number we've already seen, we conclude that
_BBN was wrong and look for a bus number in _CRS.

However, the spec[1] (figure 5-5 and the example in sec 9.12.1) and an ACPI
FAQ[2] suggest that the OS should use _CRS to discover the bus number
range, and that _BBN is really intended to bootstrap _CRS methods that
reference PCI opregions.

This patch makes us always look at _CRS first.  If _CRS doesn't supply a
bus number, we look at _BBN.  If _BBN doesn't exist, we default to zero.
This makes the behavior consistent regardless of device discovery order.
Previously, if A and B had duplicate _BBNs and we found A first, we'd only
look at B's _CRS, whereas if we found B first, we'd only look at A's _CRS.

I'm told that Windows discovers host bridge bus numbers using _CRS, so
it should be fairly safe to rely on this BIOS functionality.

This patch also removes two misleading messages: we printed the "Wrong _BBN
value, reboot and use option 'pci=noacpi'" message before looking at _CRS,
so we would likely find the bus number in _CRS, the system would work fine,
and the user would be confused.  The "PCI _CRS %d overrides _BBN 0" message
incorrectly assumes _BBN was zero, and it's useless anyway because we
print the segment/bus number a few lines later.

References:
    [1] http://www.acpi.info/DOWNLOADS/ACPIspec30b.pdf
    [2] http://www.acpi.info/acpi_faq.htm _BBN/_CRS discussion
    http://download.microsoft.com/download/9/8/f/98f3fe47-dfc3-4e74-92a3-088782200fe7/TWAR05005_WinHEC05.ppt (slide 17)
    http://bugzilla.kernel.org/show_bug.cgi?id=1662 ASUS PR-DLS
    http://bugzilla.kernel.org/show_bug.cgi?id=1127 ASUS PR-DLSW
    http://bugzilla.kernel.org/show_bug.cgi?id=1741 ASUS PR-DLS533

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Shaohua Li <shaohua.li@intel.com>
CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-20 00:01:50 -04:00
Alex Chiang 268a03a42d PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
There is no way to interact with a physical PCI slot without
sysfs, so encode the dependency and prevent this build error:

	drivers/pci/slot.c: In function 'pci_hp_create_module_link':
	drivers/pci/slot.c:327: error: 'module_kset' undeclared

This patch _should_ make pci-sysfs.o depend on CONFIG_SYSFS too,
but we cannot (yet) because the PCI core merrily assumes the
existence of sysfs:

	drivers/built-in.o: In function `pci_bus_add_device':
	drivers/pci/bus.c:89: undefined reference to `pci_create_sysfs_dev_files'
	drivers/built-in.o: In function `pci_stop_dev':
	drivers/pci/remove.c:24: undefined reference to `pci_remove_sysfs_dev_files'

So do the minimal bit for now and figure out how to untangle it
later.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fix-suggested-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-18 13:57:24 -07:00
Len Brown 7e275cc4e8 ACPI: idle: rename lapic timer workaround routines
cosmetic only.  The lapic_timer workaround routines
are specific to the lapic_timer, and are not acpi-generic.

old:

acpi_timer_check_state()
acpi_propagate_timer_broadcast()
acpi_state_timer_broadcast()

new:

lapic_timer_check_state()
lapic_timer_propagate_broadcast()
lapic_timer_state_broadcast()

also, simplify the code in acpi_processor_power_verify()
so that lapic_timer_check_state() is simply called
from one place for all valid C-states, including C1.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 01:01:42 -04:00
Len Brown 586caae36c ACPI: battery: fix CONFIG_ACPI_PROCFS_POWER=n build warning
drivers/acpi/battery.c:841: warning: label ‘end’ defined but not used

Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:38:27 -04:00
Bjorn Helgaas ff754e2e85 ACPI: use handle, not device, in system notification path
This patch changes the global system notification path so it uses the
acpi_handle, not the acpi_device.

System notifications often deal with device presence and status change.
In these cases, we may not have an acpi_device.  For example, we may
get a Device Check notification on an object that previously was not
present.  Since the object was not present, we would not have had an
acpi_device for it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:15 -04:00
Bjorn Helgaas cdd5b8ca12 ACPI: remove unused return values from Bus Check & Device Check handling
Remove return values from acpi_bus_check_device() and acpi_bus_check_scope()
since nobody looks at them.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:15 -04:00
Bjorn Helgaas aa8a149c0c ACPI: remove unused "status_changed" return value from Check Device handling
Remove "status_changed" return from acpi_bus_check_device().  Nobody
does anything useful based on its value.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:15 -04:00
Bjorn Helgaas 02c37bd8d0 ACPI: simplify notification debug messages
This replaces several messages that depend on the acpi_device struct
with a single message that uses just the acpi_handle.  We should be
able to deal with notifications to objects that do not yet have an
acpi_device struct.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:15 -04:00
Bjorn Helgaas d940669109 ACPI: battery: use .notify method instead of installing handler directly
This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.

This driver apparently relies on seeing ALL notify events, not just
device-specific ones (because it used ACPI_ALL_NOTIFY).  We use the
ACPI_DRIVER_ALL_NOTIFY_EVENTS driver flag to request all events.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:14 -04:00
Bjorn Helgaas 48fe112744 ACPI: ac: use .notify method instead of installing handler directly
This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.

This driver apparently relies on seeing ALL notify events, not just
device-specific ones (because it used ACPI_ALL_NOTIFY).  We use the
ACPI_DRIVER_ALL_NOTIFY_EVENTS driver flag to request all events.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:14 -04:00
Bjorn Helgaas 6d27813100 ACPI: allow drivers to request both device and system notify events
System notify events (0x00-0x7f) are common across all device types
and should be handled in Linux/ACPI, not in drivers.  However, some
BIOSes use system notify events in device-specific ways that require
the driver to be involved.

This patch adds a ACPI_DRIVER_ALL_NOTIFY_EVENTS driver flag.  When a
driver sets this flag and supplies a .notify method, Linux/ACPI calls
the .notify method for ALL notify events on the device, not just the
device-specific (0x80-0xff) events.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:14 -04:00
Alexander Chiang 7fe2a6c275 ACPI: kill acpi_get_physical_pci_device()
acpi_get_pci_dev() is (hopefully) better, and all callers have been
converted, so let's get rid of this duplicated functionality.

Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:32:24 -04:00
Alexander Chiang 1e4cffe78e ACPI: video: convert to acpi_get_pci_dev
Now that acpi_get_pci_dev is available, let's use it instead of
acpi_get_physical_pci_device()

Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:32:23 -04:00
Alexander Chiang 80ffdedf60 ACPI: kill acpi_get_pci_id
acpi_get_pci_dev() is better, and all callers have been converted, so
eliminate acpi_get_pci_id().

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:32:23 -04:00
Alexander Chiang 97719a8726 ACPI: acpi_pci_unbind should clean up properly after acpi_pci_bind
In acpi_pci_bind, we set device->ops.bind and device->ops.unbind, but
never clear them out.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:16 -04:00
Alexander Chiang d9efae3688 ACPI: simplify acpi_pci_irq_del_prt() API
There is no need to pass a segment/bus tuple to this API, as the callsite
always has a struct pci_bus. We can derive segment/bus from the
struct pci_bus, so let's take this opportunit to simplify the API and
make life easier for the callers.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:16 -04:00
Alexander Chiang 859a3f86ca ACPI: simplify acpi_pci_irq_add_prt() API
A PCI domain cannot change as you descend down subordinate buses, which
makes the 'segment' argument to acpi_pci_irq_add_prt() useless.

Change the interface to take a struct pci_bus *, from whence we can derive
the bus number and segment. Reducing the number of arguments makes life
simpler for callers.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:16 -04:00
Alexander Chiang 499650de69 ACPI: eviscerate pci_bind.c
Now that we can dynamically convert an ACPI CA handle to a
struct pci_dev at runtime, there's no need to statically bind
them during boot.

acpi_pci_bind/unbind are vastly simplified, and are only used
to evaluate _PRT methods on P2P bridges and non-bridge children.

This patch also changes the time-space tradeoff ever so slightly.

Looking up the ACPI-PCI binding is never in the performance path, and by
eliminating this caching, we save 24 bytes for each _ADR device in the
ACPI namespace.

This patch lays further groundwork to eventually eliminate
the acpi_driver_ops.bind callback.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:16 -04:00
Alexander Chiang c22d7f5a38 ACPI: rearrange acpi_pci_bind/acpi_pci_unbind in pci_bind.c
This is a pure code movement patch that does $subject in order
to make the following patch easier to read and review.

No functional change.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:15 -04:00
Alexander Chiang 2f7bbceb5b ACPI: Introduce acpi_get_pci_dev()
Convert an ACPI CA handle to a struct pci_dev.

Performing this lookup dynamically allows us to get rid of the
ACPI-PCI binding code, which:

	- eliminates struct acpi_device vs struct pci_dev lifetime issues
	- lays more groundwork for eliminating .start from acpi_device_ops
	  and thus simplifying ACPI drivers
	- whacks out a lot of code

This change lays the groundwork for eliminating much of pci_bind.c.

Although pci_root.c may not be the most logical place for this
change, putting it here saves us from having to export acpi_pci_find_root.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:15 -04:00
Alexander Chiang 275582031f ACPI: Introduce acpi_is_root_bridge()
Returns whether an ACPI CA node is a PCI root bridge or not.

This API is generically useful, and shouldn't just be a hotplug function.

The implementation becomes much simpler as well.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:15 -04:00
Alexander Chiang ce597bb42a ACPI: make acpi_pci_bind() static
acpi_pci_root_add() explicitly assigns device->ops.bind, and later
calls acpi_pci_bind_root(), which also does the same thing.

We don't need to repeat ourselves; removing the explicit assignment
allows us to make acpi_pci_bind() static.

Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 23:22:15 -04:00
Alex Chiang 0c526d96a5 ACPI: clean up whitespace in drivers/acpi/scan.c
Align labels in column 0, adjust spacing in 'if' statements, eliminate
trailing and superfluous whitespaces.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 22:58:42 -04:00
Alex Chiang 8b12b922ed ACPI: acpi_device_register() should call device_register()
There is no apparent reason for acpi_device_register() to manually
register a new device in two steps (initialize then add).

Just call device_register() directly.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-17 22:57:03 -04:00
Linus Torvalds 9bd47bf932 Merge branch 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
  ACPICA: Update version to 20090521.
  ACPICA: Disable preservation of SCI enable bit (SCI_EN)
  ACPICA: Region deletion: Ensure region object is removed from handler list
  ACPICA: Eliminate extra call to NsGetParentNode
  ACPICA: Simplify internal operation region interface
  ACPICA: Update Load() to use operation region interfaces
  ACPICA: New: AcpiInstallMethod - install a single control method
  ACPICA: Invalidate DdbHandle after table unload
  ACPICA: Fix reference count issues for DdbHandle object
  ACPICA: Simplify and optimize NsGetNextNode function
  ACPICA: Additional validation of _PRT packages (resource mgr)
  ACPICA: Fix DebugObject output for DdbHandle objects
  ACPICA: Fix allowable release order for ASL mutex objects
  ACPICA: Mutex support: Fix release ordering issue and current sync level
  ACPICA: Update version to 20090422.
  ACPICA: Linux OSL: cleanup/update/merge
  ACPICA: Fix implementation of AML BreakPoint operator (break to debugger)
  ACPICA: Fix miscellaneous warnings under gcc 4+
  ACPICA: Miscellaneous lint changes
  ACPICA: Fix possible dereference of null pointer
  ...
2009-06-16 11:24:23 -07:00
Linus Torvalds f0d5e12bd4 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
  x86, apic: Fix dummy apic read operation together with broken MP handling
  x86, apic: Restore irqs on fail paths
  x86: Print real IOAPIC version for x86-64
  x86: enable_update_mptable should be a macro
  sparseirq: Allow early irq_desc allocation
  x86, io-apic: Don't mark pin_programmed early
  x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
  x86, irq: update_mptable needs pci_routeirq
  x86: don't call read_apic_id if !cpu_has_apic
  x86, apic: introduce io_apic_irq_attr
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
  x86: read apic ID in the !acpi_lapic case
  x86: apic: Fixmap apic address even if apic disabled
  x86: display extended apic registers with print_local_APIC and cpu_debug code
  x86: read apic ID in the !acpi_lapic case
  x86: clean up and fix setup_clear/force_cpu_cap handling
  x86: apic: Check rev 3 fadt correctly for physical_apic bit
  x86/pci: update pirq_enable_irq() to setup io apic routing
  x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
  ...
2009-06-10 15:25:41 -07:00
Yinghai Lu eaa958402e cpumask: alloc zeroed cpumask for static cpumask_var_ts
These are defined as static cpumask_var_t so if MAXSMP is not used,
they are cleared already.  Avoid surprises when MAXSMP is enabled.

Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-09 22:30:27 +09:30
Ingo Molnar 3d58f48ba0 Merge branch 'linus' into irq/numa
Conflicts:
	arch/mips/sibyte/bcm1480/irq.c
	arch/mips/sibyte/sb1250/irq.c

Merge reason: we gathered a few conflicts plus update to latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 21:06:21 +02:00
Len Brown 6afec830ac Merge branches 'bugzilla-13121+', 'bugzilla-13233', 'redhat-bugzilla-500311', 'pci-bind-oops', 'misc-2.6.30' and 'i7300_idle' into release 2009-05-29 21:30:01 -04:00
Frans Pop 21671b88be ACPI processor: remove spurious newline from warning message
Commit 4973b22a ("ACPI processor: reset the throttling state once it's
invalid") introduced a new warning which prints a spurious newline.

The ACPI_WARNING macro that is used already takes care of adding a
newline, after adding ACPI_CA_VERSION to the message. Remove the newline
to avoid the message getting split into two lines.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 21:26:26 -04:00
Jaswinder Singh Rajput 1fc8d33aca drm/i915: acpi/video.c fix section mismatch warning
Currently acpi_video_exit() is exported as well as using __exit which causes:

  WARNING: drivers/acpi/video.o(__ksymtab+0x0): Section mismatch in reference from the variable __ksymtab_acpi_video_exit to the function .exit.text:acpi_video_exit()
  The symbol acpi_video_exit is exported and annotated __exit
  Fix this by removing the __exit annotation of acpi_video_exit or drop the export.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 21:26:25 -04:00
Zhang Rui 93bcece20e ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightness
http://bugzilla.kernel.org/show_bug.cgi?id=13121

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 21:24:06 -04:00
Zhang Rui 34ac272b3a ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display brightness
http://bugzilla.kernel.org/show_bug.cgi?id=13376

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 21:21:33 -04:00
Len Brown 34d531e640 ACPI: sanity check _PSS frequency to prevent cpufreq crash
When BIOS SETUP is changed to disable EIST, some BIOS
hand the OS an un-initialized _PSS:

        Name (_PSS, Package (0x06)
        {
            Package (0x06)
            {
                0x80000000,	// frequency [MHz]
                0x80000000,	// power [mW]
                0x80000000,	// latency [us]
                0x80000000,	// BM latency [us]
                0x80000000,	// control
                0x80000000	// status
            },
	    ...

These are outrageous values for frequency,
power and latency, raising the question where to draw
the line between legal and illegal.  We tend to survive
garbage in the power and latency fields, but we can BUG_ON
when garbage is in the frequency field.

Cpufreq multiplies the frequency by 1000 and stores it in a u32 KHz.
So disregard a _PSS with a frequency so large
that it can't be represented by cpufreq.

https://bugzilla.redhat.com/show_bug.cgi?id=500311

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-29 20:45:58 -04:00
Pallipadi, Venkatesh ee1ca48fae ACPI: Disable ARB_DISABLE on platforms where it is not needed
ARB_DISABLE is a NOP on all of the recent Intel platforms.

For such platforms, reduce contention on c3_lock
by skipping the fake ARB_DISABLE.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 21:57:30 -04:00
Bjorn Helgaas bdf43bbf2e ACPI: don't check power state after _ON/_OFF
We used to evaluate _STA to check the power state of a device after
running _ON or _OFF.  But as far as I can tell, there's no benefit
to evaluating _STA, and sometimes we trip over bugs when BIOSes don't
implement _STA correctly.

Yakui says Windows XP doesn't evaluate _STA during power transition.
So let's skip it in Linux, too.  It's conceivable that we'll need to
check _STA in the future for some reason, but until we do, I don't
see a reason to clutter this code path.

References:
    http://bugzilla.kernel.org/show_bug.cgi?id=13243
    http://marc.info/?l=linux-acpi&m=124166053803753&w=2
    http://marc.info/?l=linux-acpi&m=124175761408256&w=2
    http://marc.info/?l=linux-acpi&m=124210593114061&w=2

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 21:45:53 -04:00
Bjorn Helgaas 9eccbc2f67 ACPI: processor: move device _HID into driver
The ACPI0007 _HID used for processor "Device" objects in the namespace
is not needed outside the processor driver, so move it there.  Also, the
#define is only used once, so just remove it and hard-code "ACPI0007".

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 21:14:28 -04:00
Bjorn Helgaas 6cc73b4806 ACPI: processor: check for synthetic _HID, default to "Device" declaration
This patch inverts the logic that distinguishes "Processor" statements
from "Device" statements, so we now check explicitly for "Processor" and
default to "Device".  This removes the only real use of ACPI_PROCESSOR_HID,
so we can then remove the #define.  It also has the theoretical advantage
that if a new processor _HID were ever added, we wouldn't have to change
the code here.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 21:14:03 -04:00
Kenji Kaneshige dacd2549ca PCI/ACPI: fix wrong ref count handling in acpi_pci_bind()
The 'dev' field of struct acpi_pci_data is having a pointer to struct
pci_dev without incrementing the reference counter. Because of this, I
got the following kernel oops when I was doing some pci hotplug
operations. This patch fixes this bug by replacing wrong hand-made
pci_find_slot() with pci_get_slot() in acpi_pci_bind().

 BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8
 IP: [<ffffffff803f0e9b>] acpi_pci_unbind+0xb1/0xdd

 Call Trace:
  [<ffffffff803ecee4>] acpi_bus_remove+0x54/0x68
  [<ffffffff803ecf6d>] acpi_bus_trim+0x75/0xe3
  [<ffffffffa0345ddd>] acpiphp_disable_slot+0x16d/0x1e0 [acpiphp]
  [<ffffffffa03441f0>] disable_slot+0x20/0x60 [acpiphp]
  [<ffffffff803cfc18>] power_write_file+0xc8/0x110
  [<ffffffff803c6a54>] pci_slot_attr_store+0x24/0x30
  [<ffffffff803469ce>] sysfs_write_file+0xce/0x140
  [<ffffffff802e94e7>] vfs_write+0xc7/0x170
  [<ffffffff802e9aa0>] sys_write+0x50/0x90
  [<ffffffff8020bd6b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Tested-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 17:53:07 -04:00
Bob Moore b1cd843be7 ACPICA: Disable preservation of SCI enable bit (SCI_EN)
Preserving this bit breaks some machines. Not preserving this bit
seems to work OK in all cases, even though this goes against the
ACPI spec.

http://bugzilla.kernel.org/show_bug.cgi?id=13289

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:41:34 -04:00
Lin Ming 3362a6badb ACPICA: Region deletion: Ensure region object is removed from handler list
Prevents a possible fault when a dynamic operation region is
deleted. ACPICA BZ 507.

http://acpica.org/bugzilla/show_bug.cgi?id=507

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Alex Chiang c446eed618 ACPICA: Eliminate extra call to NsGetParentNode
Was called twice in the same function with the same parameter.
Alex Chiang.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Bob Moore f5407af3f2 ACPICA: Simplify internal operation region interface
Changed address parameter to a simple offset. This removes the
need for the caller to access the region object to obtain the
physical address.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Bob Moore 3c59f96081 ACPICA: Update Load() to use operation region interfaces
Replace memory mapping with region access calls. Now, all region
accesses go through the region handler as they should.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Lin Ming b2f7ddcfcb ACPICA: New: AcpiInstallMethod - install a single control method
This interface enables the override or creation of a single
control method. Useful to repair a bug or install a missing method.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Lin Ming e0be6f5a98 ACPICA: Invalidate DdbHandle after table unload
Mark the DdbHandle as invalid after the table it refers to is
unloaded.  This is needed because the handle itself may not be
deleted after the table unload, depending on whether it has been
stored in a named object by the caller.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Lin Ming 06366c1492 ACPICA: Fix reference count issues for DdbHandle object
Fix a problem where the DdbHandle could be prematurely deleted,
possibly causing a fault.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Bob Moore 8c725bf937 ACPICA: Simplify and optimize NsGetNextNode function
Reduced parameter count and reduced code for this frequently
used function.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:50 -04:00
Bob Moore 474caffdc1 ACPICA: Additional validation of _PRT packages (resource mgr)
Fixes a possible fault when parsing an ill-formed _PRT package.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:50 -04:00
Bob Moore a76b772736 ACPICA: Fix DebugObject output for DdbHandle objects
Was putting several extra spaces on the next line.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:32:24 -04:00
Bob Moore 315c728887 ACPICA: Fix allowable release order for ASL mutex objects
The ACPI 4.0 specification has been changed to make the SyncLevel
for mutex objects more useful. When releasing a mutex, the
synclevel of the mutex must now be the same as the current sync
level. This makes more sense. This change updates the code to
match the spec.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:32:24 -04:00
Bob Moore 10a3b461a2 ACPICA: Mutex support: Fix release ordering issue and current sync level
Fixes a problem where if multiple mutexes of the same sync level
are acquired but then not released in strict opposite order, the
current sync level becomes confused and can cause errors.
ACPICA BZ 471.

http://acpica.org/bugzilla/show_bug.cgi?id=471

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:32:24 -04:00
Bob Moore 2b09ce98a2 ACPICA: Fix implementation of AML BreakPoint operator (break to debugger)
The AML BreakPoint opcode will now cause a break into the AML
debugger if it is present/configured. This matches the expected
behavior per the ACPI specification. Previously, only a message
was output.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:50 -04:00
Bob Moore ba9c3f550e ACPICA: Fix miscellaneous warnings under gcc 4+
Some possible warnings with gcc 4+, especially with extended warnings
enabled

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:49 -04:00
Bob Moore e4c1ebfc65 ACPICA: Miscellaneous lint changes
Unused variables/headers, casting, etc.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:49 -04:00
Bob Moore 65259094c3 ACPICA: Fix possible dereference of null pointer
Fix dereference of possibly null pointer "Predefined" in the case
where the method is not one of the predefined methods.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:49 -04:00
Bob Moore b21245a85e ACPICA: Fix printf format warnings for 64-bit build
Fix warnings caused by size_t and ACPI_SIZE changing to 64 bits.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:49 -04:00
Bob Moore 10b6575b5d ACPICA: Fix possible warnings for ACPI_THREAD_ID on 64-bit build
Warnings can be generated for printf-like statements that output
the ACPI_THREAD_ID on 64-bit builds, since this type can expand
to 64-bits depending on how it is defined. Use the %p format
specifier to allow the output to automatically expand to 64 bits.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Bob Moore 41bdd8e980 ACPICA: Remove unused global variables
Remove two unused/obsolete variables.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Bob Moore 33a1d461d2 ACPICA: Change behavior of object copy for mutex/event objects
When copying these internal objects, cannot simply copy the
underlying OS object. A new OS object must be created.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Bob Moore 8eb7b2477c ACPICA: Fix a few warnings for gcc 3.4.4
Mostly for acpiexec, one in the core subsystem.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Bob Moore b74be6119e ACPICA: Update error/warning interfaces
Moved the module name and line number to the end of the message.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Shaohua Li 7d60e8ab0d cpuidle: fix AMD C1E suspend hang
When AMD C1E is enabled, local APIC timer will stop even in C1. To avoid
suspend/resume hang, this patch removes C1 and replace it with a cpu_relax() in
suspend/resume path. This hasn't any impact in runtime path.

http://bugzilla.kernel.org/show_bug.cgi?id=13233

[ impact: avoid suspend/resume hang in AMD CPU with C1E enabled ]

Tested-by: Dmitry Lyzhyn <thisistempbox@yahoo.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-26 23:45:33 -04:00
Shaohua Li 87ad57bacb cpuidle: makes AMD C1E work in acpi_idle
When AMD C1E is enabled, local APIC timer will stop even in C1.
This patch uses broadcast IPI to replace local APIC timer in C1.

http://bugzilla.kernel.org/show_bug.cgi?id=13233

[ impact: avoid boot hang in AMD CPU with C1E enabled ]

Tested-by: Dmitry Lyzhyn <thisistempbox@yahoo.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-26 23:38:56 -04:00
Len Brown 4e3507f718 Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', 'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release 2009-05-16 01:55:59 -04:00
Len Brown a0bf284bfe ACPI: Idle C-states disabled by max_cstate should not disable the TSC
Processor idle power states C2 and C3 stop the TSC on many machines.
Linux recognizes this situation and marks the TSC as unstable:

Marking TSC unstable due to TSC halts in idle

But if those same machines are booted with "processor.max_cstate=1",
then there is no need to validate C2 and C3, and no need to
disable the TSC, which can be reliably used as a clocksource.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-16 01:52:39 -04:00
Len Brown 520daf7217 ACPI: idle: fix init-time TSC check regression
A previous 2.6.30 patch, a71e4917dc,
(ACPI: idle: mark_tsc_unstable() at init-time, not run-time)
erroneously disabled the TSC on systems that did not actually
have valid deep C-states.

Move the check after the deep-C-states are validated,
via new helper, tsc_check_state(), hich replaces tsc_halts_in_c().

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frans Pop <elendil@planet.nl>
2009-05-16 01:51:51 -04:00
Zhang Rui 4973b22aa8 ACPI processor: reset the throttling state once it's invalid
If the BIOS hands us an invalid throttling state,
write a valid state.

http://bugzilla.kernel.org/show_bug.cgi?id=13259

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 23:21:54 -04:00
Zhang Rui 56c213fa01 ACPI processor: introduce module parameter processor.ignore_tpc
Introduce module parameter processor.ignore_tpc.

Some laptops are shipped with buggy _TPC,
this module parameter is used to to disable the buggy support.

http://bugzilla.kernel.org/show_bug.cgi?id=13259

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 23:21:43 -04:00
Len Brown 815ab0fd40 ACPI: suspend: restore BM_RLD on resume
In 2.6.29,
31878dd86b
"ACPI: remove BM_RLD access from idle entry path"
moved BM_RLD initialization to init-time from run time.

But we discovered that some BIOS do not restore BM_RLD
after suspend, causing device errors on C3 and C4
after resume.  So now the kernel restores BM_RLD.

http://bugzilla.kernel.org/show_bug.cgi?id=13032

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 22:44:05 -04:00
Lin Ming 975b3c474c ACPI: resume: re-enable SCI-enable workaround
The BIOS bug workaround mistakenly got disabled
when we followed the ACPI specification more closely
by ignoring OS updates to that bit.

(The BIOS is supposed to update SCI_EN, not the OS)

http://bugzilla.kernel.org/show_bug.cgi?id=13289

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 22:27:49 -04:00
Ingo Molnar 6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00
Len Brown ddc50b6ad6 ACPI: power: update error message
"Transitioning device [%s] to D%d" is not correct.
We print this line when we attempted to transition
the device, and it failed.

So instead, print
"Device [%s] failed to transition to D%d\n"

This can happen under two conditions:

1. acpi_power_transition() fails when trying to handle the
   _ON/_OFF for associated power resource.

2. acpi_evaluate_object() on the explicit _PS0/_PS3
   for that actual device could fail.

this change clarifies, but doesn't fix
http://bugzilla.kernel.org/show_bug.cgi?id=13243

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-08 00:07:30 -04:00
Len Brown 5afc4abe79 ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness
http://bugzilla.kernel.org/show_bug.cgi?id=13121

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-07 21:11:56 -04:00
Len Brown 5199176341 ACPICA: use acpi.* modparam namespace
Add acpi/acpica/*.c to the acpi.* modparam namespace
so that any modparams we stick into ACPICA do not
expose ACPICA filenames to users.

There are currently only two modparams in ACPICA,
just recently added for
http://bugzilla.kernel.org/show_bug.cgi?id=13041

With this change, they become

acpi.gts=1
acpi.bfs=1

rather than

hwsleep.gts=1
hwsleep.bfs=1

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-07 15:24:31 -04:00
Robert Moore 53951bd57d acpica: validate package element more carefully in acpi_rs_get_pci_routing_table_length
acpi_rs_get_pci_routing_table_length is not performing sufficient
validation on the package returned from _PRT.  It assumes a package of
packages and fails/faults if this is not the case.

We should validate each subpackage when extracted from the parent
package, and not accept objects of the wrong type, since that will just
cause the scanning to fail (likely with a kernel oops).

This can only happen with a serious BIOS bug, and is accompanied by a
warning something like this:

  ACPI Warning (nspredef-0949): \_SB_.PCI0.PEG4._PRT: Return Package type mismatch at index 0 - found Integer, expected Package [20090320]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 11:48:37 -07:00
Linus Torvalds 56a50adda4 Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: fix up error path leak in i915_cmdbuffer
  drm/i915: fix unpaired i915 device mutex on entervt failure.
  drm/i915: add support for G41 chipset
  drm/i915: Enable ASLE if present
  drm/i915: Unregister ACPI video driver when exiting
  drm/i915: Register ACPI video even when not modesetting
  drm/i915: fix transition to I915_TILING_NONE
  drm/i915: Don't let an oops get triggered from irq_emit without dma init.
  drm/i915: allow tiled front buffers on 965+
2009-04-28 17:21:20 -07:00
Yinghai Lu a2f809b08a irq: change ACPI GSI APIs to also take a device argument
We want to use dev_to_node() later on, to be aware of the 'home node'
of the GSI in question.

[ Impact: cleanup, prepare the IRQ code to be more NUMA aware ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Len Brown <lenb@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
LKML-Reference: <49F65560.20904@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:17 +02:00
Zhang Rui 45cb50e646 ACPI video: dmi check for broken _BQC on Acer Aspire 5720
On Acer Aspire 5720, _BQC always returns a value 9 smaller than
the actual brightness level.  Add dmi quirk for this laptop.

http://bugzilla.kernel.org/show_bug.cgi?id=13121

Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24 12:13:18 -04:00
Len Brown 1162cf6bc6 Merge branch 'bjorn.button' into release 2009-04-24 10:42:29 -04:00
Len Brown 5f855a8f0c Merge branch 'bugzilla-13036' into release 2009-04-24 10:42:21 -04:00
Len Brown 9c18f0b709 Merge branch 'bugzilla-13142' into release 2009-04-24 10:42:03 -04:00
Len Brown 3869e929bb Merge branch 'hpet' into release 2009-04-24 10:41:31 -04:00
Len Brown 2d40570786 Merge branch 'bugzilla-12249' into release 2009-04-24 01:35:46 -04:00
Len Brown 04a2e6297d Merge branch 'bugzilla-12270' into release 2009-04-24 01:35:33 -04:00
Len Brown ac0849fb6c Merge branch 'bugzilla-13041' into release 2009-04-24 01:35:24 -04:00
Len Brown f752a091ab Merge branch 'idle' into release 2009-04-24 01:35:08 -04:00
Len Brown 6e6c348fb2 Merge branch 'irq' into release 2009-04-24 01:34:59 -04:00
Len Brown 7f3745ad7a Merge branch 'sony-laptop' into release 2009-04-24 01:34:52 -04:00
Len Brown 771e5ce3bd Merge branch 'thermal-regression' into release 2009-04-24 01:34:45 -04:00
Len Brown 60cd8adc6b Merge branch 'video-ac-dc' into release 2009-04-24 01:34:29 -04:00
Len Brown a38d75fa2e Revert "ACPICA: delete check for AML access to port 0x81-83"
This reverts commit fdbdc7fc79.

That temporary quick-fix is no longer necessary,
as the previous patch, a65131e942,
"I/O port protection: update for windows compatibility"
should handle this issue for all ports, including this one.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24 00:32:52 -04:00
Lin Ming a65131e942 I/O port protection: update for windows compatibility.
For windows compatibility,
1) On a port protection violation, simply ignore the request and
   do not return an exception (allow the control method to continue execution.)
2) If only part of the request overlaps a protected port,
   read/write the individual ports that are not protected.

http://bugzilla.kernel.org/show_bug.cgi?id=13036

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24 00:25:55 -04:00
Almer S. Tigelaar 5aa63f038f ACPI: EC: Fix ACPI EC resume non-query interrupt message
When resuming from standby (on a laptop) I see the following message in
my kernel.log:
"ACPI: EC: non-query interrupt received, switching to interrupt mode"
This apparently prevented sony-laptop to properly restore the brightness
level on resume.

The cause: In drivers/acpi/ec.c the acpi_ec_suspend function clears the
GPE mode bit, but this is not restored in acpi_ec_resume (the function
below it). The patch below fixes this by properly restoring the GPE_MODE
bit. Tested and confirmed to work.

Signed-off-by: Almer S. Tigelaar <almer@gnome.org>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-23 23:56:57 -04:00
Len Brown 615dfd93e2 ACPI: prevent processor.max_cstate=0 boot crash
As processor.max_cstate is an init-time-only modparam,
sanity checking it at init-time is sufficient.

http://bugzilla.kernel.org/show_bug.cgi?id=13142

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-23 23:21:29 -04:00
Len Brown f461ddea0a ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M
Linux tells ICH4 users that they can (manually) invoke
"hpet=force" to enable the undocumented ICH-4M HPET.
The HPET becomes available for both clocksource and clockevents.

But as of ff69f2bba6
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
the HPET may be used via clocksource for idle accounting, and
hpet=force on an ICH4 box hangs boot.

It turns out that touching the MMIO HPET withing
the ARB_DIS part of C3 will hang the hardware.

The fix is to simply move the timer access outside
the ARB_DIS region.  This is a no-op on modern hardware
because ARB_DIS is no longer used.

http://bugzilla.kernel.org/show_bug.cgi?id=13087

Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-23 21:51:51 -04:00
Len Brown 9261461077 ACPI: delete obsolete "bus master activity" proc field
Linux-2.6.29 deleted the legacy ACPI idle handler, leaving
the CPU_IDLE handler, which does not track bus master activity.

So delete the unused bm_activity field -- it is confusing to
print an always zero value.

This patch could break programs that parse
/proc/acpi/processor/*/power, since it deletes this
line from that file:

bus master activity:     00000000

http://bugzilla.kernel.org/show_bug.cgi?id=13145
is not fixed by this patch, but provoked this patch.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-22 19:56:09 -04:00
Len Brown a71e4917dc ACPI: idle: mark_tsc_unstable() at init-time, not run-time
The c2 and c3 idle handlers check tsc_halts_in_c()
after every time they return from idle.  Um, when?:-)

Move this check to init-time to remove the unnecessary
run-time overhead, and also to have the check complete before
the first entry into the idle handler.

ff69f2bba6
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
replaced the hard-coded use of the PM-timer inside idle,
with ktime_get_readl(), which possibly uses the TSC --
so it is now especially prudent to detect a broken TSC
before entering idle.

http://bugzilla.kernel.org/show_bug.cgi?id=13087

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-22 19:22:18 -04:00
Len Brown 88bea188b8 ACPI: add /sys/firmware/acpi/interrupts/sci_not counter
This counter may prove useful in debugging some
spurious interrupt issues seen in the field.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-21 00:35:47 -04:00
Zhang Rui 90af2cf620 ACPI video: fix an error when the brightness levels on AC and on Battery are same
when the brightness level on AC and brightness level on Battery
are same, the level_ac_battery is 1 in the current code,
which is wrong.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-20 00:22:44 -04:00
Rafael J. Wysocki 6a7c7eaf71 PM/Suspend: Introduce two new platform callbacks to avoid breakage
Commit 900af0d973 (PM: Change suspend
code ordering) changed the ordering of suspend code in such a way
that the platform .prepare() callback is now executed after the
device drivers' late suspend callbacks have run.  Unfortunately, this
turns out to break ARM platforms that need to talk via I2C to power
control devices during the .prepare() callback.

For this reason introduce two new platform suspend callbacks,
.prepare_late() and .wake(), that will be called just prior to
disabling non-boot CPUs and right after bringing them back on line,
respectively, and use them instead of .prepare() and .finish() for
ACPI suspend.  Make the PM core execute the .prepare() and .finish()
platform suspend callbacks where they were executed previously (that
is, right after calling the regular suspend methods provided by
device drivers and right before executing their regular resume
methods, respectively).

It is not necessary to make analogous changes to the hibernation
code and data structures at the moment, because they are only used
by ACPI platforms.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Len Brown <len.brown@intel.com>
2009-04-19 20:08:42 +02:00
Matthew Garrett 67405439bc thermal: Fix polling frequency for systems without passive cooling
The polling interval (in deciseconds) was accidently interpreted as
being in milliseconds in one codepath, resulting in excessively frequent
polling. Ensure that the conversion is performed.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-18 01:05:23 -04:00
Len Brown 96f15efcea ACPI: Disable _GTS and _BFS support by default
Executing BIOS code paths not exercised by Windows
tends to get Linux into trouble.

However, if a system does benefit from _GTS or _BFS,
acpi.gts=1 an acpi.bfs=1 are now available to enable them.

http://bugzilla.kernel.org/show_bug.cgi?id=13041

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-17 23:32:20 -04:00
Matthew Garrett 3b1c1c1118 drm/i915: Unregister ACPI video driver when exiting
The i915 DRM triggers registration of the ACPI video driver on load. It
should unregister it at unload in order to avoid generating backtraces on
being reloaded.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-17 13:31:07 -07:00
Linus Torvalds b0cbc861a3 Revert "ACPI battery: fix async boot oops"
This reverts commit 5d38258ec0, since the
underlying problem got fixed properly in the previous commit ("async:
Fix module loading async-work regression").

Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-11 12:45:20 -07:00
Zhang Rui e047cca66c ACPI video: handle indexed _BQC correctly
In the current code, for a box with an indexed _BQC method, we
1. get the current brightness level by evaluating _BQC
2. set the value gotten in step 1 to _BCM
3. get the current brightness level again
4. set the _BQC_use_index flag if the results gotten
   in step 1 and in step 3 don't equal.

But this logic doesn't work actually, because the _BQC_use_index
is not set when acpi_video_device_lcd_set_level is invoked.
This results in a failure in step 2.
http://bugzilla.kernel.org/show_bug.cgi?id=12249#c83

Now, we set the _BQC_use_index flag after invoking _BQC for the first
time. And reevaluate the _BQC to get the correct brightness level.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 01:05:58 -04:00
Zhang Rui 82babbb388 ACPI: Revert conflicting workaround for BIOS w/ mangled PRT entries
2f894ef9c8
in Linux-2.6.21 worked around BIOS with mangled _PRT entries:
http://bugzilla.kernel.org/show_bug.cgi?id=6859

d0e184abc5
worked around the same issue via ACPICA, and shipped in 2.6.27.

Unfortunately the two workarounds conflict:
http://bugzilla.kernel.org/show_bug.cgi?id=12270

So revert the Linux specific one.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:57:21 -04:00
Bjorn Helgaas d68b597c88 ACPI: button: remove control method/fixed hardware distinctions
This patch removes the driver distinction between control method (CM)
and fixed hardware (FF) buttons.  We previously needed that so we
could install either a fixed event handler or a notify handler, but
the Linux/ACPI code now handles that for us, so we don't need to
worry about it.

Note that this removes the FF/CM annotation from the "info" files
in /proc.  For example,

    /proc/acpi/button/PWRF/info:
    -type:		Power Button (FF)
    +type:		Power Button

I don't think there's anything meaningful user-space can do by
knowing whether a button is a control method or a fixed hardware
button, so nobody should be looking at the FF/CM.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:41 -04:00
Bjorn Helgaas 106c19e7b9 ACPI: button: remove button->device pointer
We no longer need a pointer from struct acpi_button back to the
struct acpi_device.  Everywhere we used that pointer, we either
already have, or can easily get, the acpi_device pointer without
using the copy from acpi_button.  So this patch removes the
structure element.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas bf04a77227 ACPI: button: cache hid/name/class pointers
This patch adds temporaries to cache the acpi_device_hid(),
acpi_device_name(), and acpi_device_class() pointers so we
don't have to clutter the code with so many uses of those
interfaces.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas 1bce81131c ACPI: button: use Linux style for getting driver_data
It's typical and slightly more compact to look up the driver_data
structure by initializing the automatic variable at its definition.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas e2fb9754d2 ACPI: button: remove unnecessary null pointer checks
Better to oops and learn about a bug than to silently cover it up.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Bjorn Helgaas 50a4da8901 ACPI: button: whitespace changes
This patch changes a bit of whitespace to follow Linux conventions.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:36:40 -04:00
Len Brown 8897c18595 Merge branches 'release', 'APERF', 'ARAT', 'misc', 'kelvin', 'device-lock' and 'bjorn.notify' into release 2009-04-07 18:18:42 -04:00
Venkatesh Pallipadi db954b5898 x86 ACPI: Add support for Always Running APIC timer
Add support for Always Running APIC timer, CPUID_0x6_EAX_Bit2.
This bit means the APIC timer continues to run even when CPU is
in deep C-states.

The advantage is that we can use LAPIC timer on these CPUs
always, and there is no need for "slow to read and program"
external timers (HPET/PIT) and the timer broadcast logic
and related code in C-state entry and exit.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 18:17:51 -04:00
Len Brown fdbdc7fc79 ACPICA: delete check for AML access to port 0x81-83
Sony laptops apparently write 4-bytes (rather than 1 byte)
to debug port 0x80, which spews error messages:

Denied AML access to port 0x00000080/4 (DMA1 0x0081-0x0083) [20090320]

http://bugzilla.kernel.org/show_bug.cgi?id=13036

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 17:33:58 -04:00
Bjorn Helgaas 7015558fca ACPI: video: use .notify method instead of installing handler directly
This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 16:26:57 -04:00
Bjorn Helgaas 342d550db1 ACPI: thermal: use .notify method instead of installing handler directly
This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 16:26:57 -04:00
Vegard Nossum 5d38258ec0 ACPI battery: fix async boot oops
> BUG: unable to handle kernel NULL pointer dereference at (null)

What happens is that the battery module's init sections are being freed
before the async callback (which was marked __init) has run. This theory
is supported by the fact that the bad RIP value is a vmalloc address.

The immediate fix is to make this a non-init call.

(A better long-term fix is of course to wait with init-section unloading
until a module's async initcalls have been run, which would allow us to
discard this function which is still only run once, after all. Perhaps a
new async_initcall() function for the async/module API, if this is needed
for other modules in the future?)

Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 16:24:54 -04:00
Linus Torvalds 8e2c4f2844 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: pci_slot: grab refcount on slot's bus
  PCI Hotplug: acpiphp: grab refcount on p2p subordinate bus
  PCI: allow PCI core hotplug to remove PCI root bus
  PCI: Fix oops in pci_vpd_truncate
  PCI: don't corrupt enable_cnt when doing manual resource alignment
  PCI: annotate pci_rescan_bus as __ref, not __devinit
  PCI-IOV: fix missing kernel-doc
  PCI: Setup disabled bridges even if buses are added
  PCI: SR-IOV quirk for Intel 82576 NIC
2009-04-07 11:24:19 -07:00
Luca Tettamanti 2c03d07ad5 hwmon: Add Asus ATK0110 support
Asus boards have an ACPI interface for interacting with the hwmon (fan,
temperatures, voltages) subsystem; this driver exposes the relevant
information via the standard sysfs interface.

There are two different ACPI interfaces:
- an old one (based on RVLT/RFAN/RTMP)
- a new one (GGRP/GITM)
Both may be present but there a few cases (my board, sigh) where the
new interface is just an empty stub; the driver defaults to the old one
when both are present.
The old interface has received a considerable testing, but I'm still
awaiting confirmation from my tester that the new one is working as
expected (hence the debug code is still enabled).

Currently all the attributes are read-only, though a (partial) control
should be possible with a bit more work.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-04-07 15:32:59 +02:00
Len Brown 33b5715015 ACPI: delete acpi_device.g_list
unused

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 02:02:15 -04:00
Jean Delvare 13614e37e9 ACPI: Adjust Kelvin offset to match local implementation
The exact offset between Kelvin and degree Celsius is 273.15. However
ACPI handles temperature values with a single decimal place. As a
consequence, some implementations use an offset of 273.1 and others
use an offset of 273.2. Try to find out which one is being used, to
present the most accurate and visually appealing number.

Tested on a Sony Vaio PGC-GR214EP (which uses 273.1) and a Lenovo
Thinkpad T60p (which uses 273.2).

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 01:37:27 -04:00
Shaohua Li 9090589d87 ACPI: convert acpi_device_lock spinlock to mutex
Convert acpi_device_lock to a mutex to avoid
a potential race upon access to /proc/acpi/wakeup

Delete the lock entirely in wakeup.c
since it is not necessary (and can not sleep)

Found-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 00:02:40 -04:00
Alex Chiang 72800360fd PCI: pci_slot: grab refcount on slot's bus
If a logical hot unplug (remove) is performed on a physical PCI slot's
parent bridge, and then pci_slot is unloaded, we will encounter an oops:

  [<ffffffff803a788a>] kobject_release+0x9a/0x290
  [<ffffffff803a77f0>] ? kobject_release+0x0/0x290
  [<ffffffff803a8ce7>] kref_put+0x37/0x80
  [<ffffffff803a76f7>] kobject_put+0x27/0x60
  [<ffffffff803bebcc>] ? pci_destroy_slot+0x3c/0xc0
  [<ffffffff803bebd5>] pci_destroy_slot+0x45/0xc0
  [<ffffffffa000f05c>] acpi_pci_slot_remove+0x5c/0x91 [pci_slot]
  [<ffffffff8040064b>] acpi_pci_unregister_driver+0x4b/0x62
  [<ffffffffa000f5c8>] acpi_pci_slot_exit+0x10/0x12 [pci_slot]
  [<ffffffff80276ce1>] sys_delete_module+0x161/0x250

We need to grab a reference to the parent PCI bus, which will pin
the bus and prevent it from being released until pci_slot is unloaded.

Cc: lenb@kernel.org
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:31:14 -07:00
Bjorn Helgaas 7ec0a72907 ACPI: processor: use .notify method instead of installing handler directly
This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Zhang Rui <rui.zhang@intel.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
CC: Venki Pallipadi <venkatesh.pallipadi@intel.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:25:07 -04:00
Bjorn Helgaas 373cfc360e ACPI: button: use .notify method instead of installing handler directly
This patch adds a .notify() method.  The presence of .notify() causes
Linux/ACPI to manage event handlers and notify handlers on our behalf,
so we don't have to install and remove them ourselves.

Note that events from fixed hardware buttons now show up as a special
notify event, so to preserve user-space backward compatibility, we
convert that back to ACPI_BUTTON_NOTIFY_STATUS.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:25:07 -04:00
Bjorn Helgaas 46ec8598fd ACPI: support acpi_device_ops .notify methods
This patch adds support for ACPI device driver .notify() methods.  If
such a method is present, Linux/ACPI installs a handler for device
notifications (but not for system notifications such as Bus Check,
Device Check, etc).  When a device notification occurs, Linux/ACPI
passes it on to the driver's .notify() method.

In most cases, this removes the need for drivers to install their own
handlers for device-specific notifications.

For fixed hardware devices like some power and sleep buttons, there's
no notification value because there's no control method to execute a
Notify opcode.  When a fixed hardware device generates an event, we
handle it the same as a regular device notification, except we send
a ACPI_FIXED_HARDWARE_EVENT value.  This is outside the normal 0x0-0xff
range used by Notify opcodes.

Several drivers install their own handlers for system Bus Check and
Device Check notifications so they can support hot-plug.  This patch
doesn't affect that usage.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:25:07 -04:00
Len Brown 478c6a43fc Merge branch 'linus' into release
Conflicts:
	arch/x86/kernel/cpu/cpufreq/longhaul.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:14:15 -04:00
Len Brown 8a3f257c70 Merge branch 'misc' into release 2009-04-05 01:52:07 -04:00
Len Brown 33526a5360 Merge branch 'x2apic' into release 2009-04-05 01:51:51 -04:00
Len Brown e2fae0abf6 Merge branch 'constify' into release 2009-04-05 01:51:16 -04:00
Len Brown fff251f6b2 Merge branches 'bugzilla-12461' and 'bugzilla-9998' into release 2009-04-05 01:51:10 -04:00
Len Brown 3b4dadf05d Merge branch 'acpi_enforce_resources' into release 2009-04-05 01:50:46 -04:00
Len Brown 59b17bf6ea Merge branch 'async-battery' into release
Conflicts:
	drivers/acpi/Makefile

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 01:48:46 -04:00
Len Brown edd84690d1 Merge branch 'acpi-modparam' into release
Conflicts:
	drivers/acpi/Makefile

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 01:45:50 -04:00
Len Brown 1264881050 Merge branch 'video' into release
Conflicts:
	drivers/acpi/video.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 01:40:06 -04:00
Len Brown 7329e9356e Merge branch 'psd' into release 2009-04-05 01:39:33 -04:00
Len Brown 3266d63c06 Merge branch 'battery' into release 2009-04-05 01:39:26 -04:00
Len Brown 4f3bff70a6 Merge branch 'thermal' into release 2009-04-05 01:39:12 -04:00
Len Brown 2ddb9f17ba Merge branch 'pmtimer-overflow' into release 2009-04-05 01:39:07 -04:00
Len Brown a3b2c5e413 Merge branch 'dynamic-ssdt' into release 2009-04-05 01:39:00 -04:00
Len Brown 4938370096 Merge branch 'driver-ops-cleanup' into release 2009-04-05 01:38:51 -04:00
Len Brown e857b33d18 Merge branch 'bjorn-cleanups' into release 2009-04-05 01:38:42 -04:00
Len Brown 9a38f4eec5 Merge branch 'bjorn-initcall-cleanup' into release 2009-04-05 01:38:31 -04:00
Arjan van de Ven 0f66af5301 ACPI: battery: asynchronous init
The battery driver tends to take quite some time to initialize
(100ms-300ms is quite typical).
This patch initializes the batter driver asynchronously, so that other
things in the kernel can initialize in parallel to this 300 msec.

As part of this, the battery driver had to move to the back
of the ACPI init order (hence the Makefile change).
Without this move, the next ACPI driver would just block
on the ACPI/devicee layer semaphores until the battery driver was
done anyway, not gaining any boot time.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-04 12:51:17 -04:00
Len Brown c07c9a78a9 video: build fix
acpi_video_device_write_state() and friends now return ssize_t,
while the constify patch assumed it was still int.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-04 03:33:45 -04:00
Jan Engelhardt b7171ae74b ACPI: constify VFTs (2/2)
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 23:15:07 -04:00
Jan Engelhardt 070d8eb1f6 ACPI: constify VFTs (1/2)
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 23:14:40 -04:00
Jan Beulich 609d4bc949 ACPI: constify tables in pci_irq.c
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 22:00:40 -04:00
Suresh Siddha 7237d3de78 x86, ACPI: add support for x2apic ACPI extensions
All logical processors with APIC ID values of 255 and greater will have their
APIC reported through Processor X2APIC structure (type-9 entry type) and all
logical processors with APIC ID less than 255 will have their APIC reported
through legacy Processor Local APIC (type-0 entry type) only. This is the
same case even for NMI structure reporting.
    
The Processor X2APIC Affinity structure provides the association between the
X2APIC ID of a logical processor and the proximity domain to which the logical
processor belongs.
    
For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device()
objects in the ACPI namespace.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 20:08:12 -04:00
Linus Torvalds 811158b147 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...
2009-04-03 15:24:35 -07:00
Dan Carpenter f240729832 dock: fix dereference after kfree()
dock_remove() calls kfree() on dock_station so we should use
list_for_each_entry_safe() to avoid dereferencing freed memory.

Found by smatch (http://repo.or.cz/w/smatch.git/).  Compile tested.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 12:48:59 -04:00
Thomas Renninger 67dc092187 ACPI: Remove R40e c-state blacklist
The recent ACPICA patch
(ACPICA: FADT: Favor 32-bit register addresses for compatibility)
makes machine to use the right FADT HW addresses
and C-states now work fine.

http://bugzilla.kernel.org/show_bug.cgi?id=8246

Signed-off-by: Thomas Renninger <trenn@suse.de>
Tested-by: Mark Doughty <me@markdoughty.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 12:11:52 -04:00
Len Brown 53af9cfb37 ACPI: get_throttling_state() cannot be larger than state_count
Reported-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 12:05:14 -04:00
Zhao Yakui 2a9ef8e1a8 ACPI: suspend: Add the Pansonic CF51 box to the dmi check table
The Pansonic CF51-2L requires "acpi_sleep=old_ordering",
so invoke it automatically via DMI.

http://bugzilla.kernel.org/show_bug.cgi?id=12561

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03 12:05:13 -04:00
Len Brown ae7d51517b ACPI: simplify processor lines in Makefile
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-02 22:49:43 -04:00
Luca Tettamanti 7e90560c50 ACPI: acpi_enforce_resource=strict by default
Enforce strict resource checking - disallowing access by native
drivers to IO ports and memory regions claimed by ACPI firmware.

The patch is mainly aimed to block native hwmon drivers from touching
monitoring chips that ACPI thinks it own.

If this causes a regression, boot with "acpi_enforce_resources=lax"
which was the previous default.

http://bugzilla.kernel.org/show_bug.cgi?id=12376
http://bugzilla.kernel.org/show_bug.cgi?id=12541

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-02 18:57:46 -04:00
Rusty Russell 5b5d911740 ACPI: simplify module_param namespace
Impact: cleanup

Rather than overriding MODULE_PARAM_PREFIX, build via acpi.o so
KBUILD_MODNAME is set to "acpi".

This is the logical way to do it, even though acpi cannot be a module
due to these config options being bool.  Those parts of ACPI which can
be modular are not built into the acpi "module".

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-02 16:38:11 -04:00
Linus Torvalds e76e5b2c66 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-04-01 09:47:12 -07:00
Alexey Starikovskiy a5032bfdd9 ACPI: EC: Always parse EC device
If ECDT info is not valid, we have last chance to configure
EC driver properly at this point, don't miss it.

http://bugzilla.kernel.org/show_bug.cgi?id=12461

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-01 01:33:15 -04:00
Alexey Starikovskiy 34ff4dbccc ACPI: EC: Separate delays for MSI hardware
MSI notebooks require very strict delays, while all others
are happy with msleep().

References: http://bugzilla.kernel.org/show_bug.cgi?id=9998

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-01 00:25:10 -04:00
Alexey Dobriyan 99b7623380 proc 2/2: remove struct proc_dir_entry::owner
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug . Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.

We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.

But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.

->read_proc/->write_proc were just fixed to not require ->owner for
protection.

rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.

Removing ->owner will also make PDE smaller.

So, let's nuke it.

Kudos to Jeff Layton for reminding about this, let's say, oversight.

http://bugzilla.kernel.org/show_bug.cgi?id=12454

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-31 01:14:44 +04:00
Adam Buchbinder b731d7b6a7 trivial: Fix misspelling of "Celsius".
A few comments say "Celcius"; this fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:03 +02:00
Zhang Rui 98758faffc ACPI video: add a warning message if _BQC is not found
ACPI backlight control w/o _BQC support is kinda firmware bug.
Add a warning if _BQC is not implemented.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 22:37:22 -04:00
Alexey Starikovskiy 7faa144a51 ACPI: battery: add power_{now,avg} properties to power_class
ACPI has smart batteries, which work in units of energy and measure
rate of (dis)charge as power, thus it is not appropriate to export it
as a current_now. Current_now will still be exported to allow
for userland applications to match.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 22:23:52 -04:00
Matthew Garrett 74a365b3f3 ACPI: Populate DIDL before registering ACPI video device on Intel
Intel graphics hardware that implements the ACPI IGD OpRegion spec
requires that the list of display devices be populated before any ACPI
video methods are called. Detect when this is the case and defer
registration until the opregion code calls it. Fixes crashes on HP
laptops.

http://bugzilla.kernel.org/show_bug.cgi?id=11259

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 22:11:03 -04:00
Zhang Rui c60d638e29 ACPI video: support buggy BIOSes with _BCQ implemented
Some buggy BIOSes implements _BCQ instead of _BQC.
Male ACPI video driver support these buggy BIOS.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 21:57:30 -04:00
Zhang Rui 1a7c618a3f ACPI video: support _BQC/_BCL/_BCM methods that use index values
The input/output of _BQC/_BCL/_BCM control methods should be represented
by a number between 0 and 100, and can be thought of as a percentage.
But some buggy _BQC/_BCL/_BCM methods use the index values instead.
http://bugzilla.kernel.org/show_bug.cgi?id=12302
http://bugzilla.kernel.org/show_bug.cgi?id=12249
http://bugzilla.kernel.org/show_bug.cgi?id=12037

Add the functionality to support such kind of BIOSes in ACPI video driver.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 21:56:45 -04:00
Zhang Rui d80fb99fdc ACPI video: support reversed _BCL method in ACPI video driver
The brightness levels returned by _BCL package are in a reversed order
on some laptops.
http://bugzilla.kernel.org/show_bug.cgi?id=12037
http://bugzilla.kernel.org/show_bug.cgi?id=12302
http://bugzilla.kernel.org/show_bug.cgi?id=12235

sort the _BCL packge in case it's reversed.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 21:56:24 -04:00
Zhang Rui d32f69470c ACPI video: support _BCL packages that don't export brightness levels when machine is on AC/Battery
Many buggy BIOSes don't export the brightness levels when machine
is on AC/Battery in the _BCL method.

Reformat the _BCL package for these laptops:
now the elements in device->brightness->levels[] are like:
levels[0]: brightness level when on AC power.
levels[1]: brightness level when on Battery power.
levels[2]: supported brightness level 1.
levels[3]: supported brightness level 2.
...
levels[n]: supported brightness level n-1.
levels[n + 1]: supported brightness level n.
So if there are n supported brightness levels on this laptop,
we will have n+2 entries in device->brightnes->levels[].

level[0] and level[1] are invalid on the laptops that don't
export the brightness levels on AC/Battery.
Fortunately, we never use these two values at all, even for the
valid ones.

http://bugzilla.kernel.org/show_bug.cgi?id=12249

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 21:55:58 -04:00
Zhang Rui 24450c7add ACPI video: check the return value of acpi_video_device_lcd_set_level
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 21:55:23 -04:00
Zhang Rui c8890f903a ACPI video: check the return value of acpi_video_device_lcd_get_level_current
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 21:48:29 -04:00
Stanislaw Gruszka e1eb47797a ACPI: Avoid wiping out pr->performance during preregistering
When cpufreq driver call acpi_processor_preregister_performance() , function
will clean up pr->performance even if there is possibly already registered
other cpufreq driver. The patch fix this potential problem. It also remove
double checks in P domain basic validity code and move these checks to function
where _PSD data is captured.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 21:11:55 -04:00
Bjorn Helgaas c0ce093f5b ACPI: remove unused acpi_device_ops .shutdown method
No drivers use the .shutdown method, so remove it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 18:03:48 -04:00
Stephen Rothwell f6f5c45e06 ACPI: update thermal for bus_id removal
> drivers/acpi/thermal.c: In function 'thermal_notify':
> drivers/acpi/thermal.c:768: error: 'struct device' has no member named 'bus_id'
>
> Caused by commit b1569e99c7 ("ACPI: move
> thermal trip handling to generic thermal layer") interacting with commit
> d4a078fca590911cdf87a8eaffee1b6e643c2558 ("driver core: get rid of struct
> device's bus_id string array").
>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 16:58:12 -04:00
Bjorn Helgaas 018f452e9d ACPI: tidy up makefile
This patch removes the suggestion that ec.o link order is important,
because it doesn't matter since acpi_ec_init() is no longer an initcall.
And it puts together most of the core modules that are not configurable.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:41 -04:00
Bjorn Helgaas 201b8c655f ACPI: call acpi_wakeup_device_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_wakeup_device_init() directly.
Previously, acpi_wakeup_device_init() was a late_initcall (sequence 7).

acpi_wakeup_device_init() depends on acpi_wakeup_device_list, which
is populated when ACPI devices are enumerated by acpi_init() ->
acpi_scan_init().  Using late_initcall is certainly enough to make
sure acpi_wakeup_device_list is populated, but it is more than
necessary.  We can just as easily call acpi_wakeup_device_init()
directly from acpi_init(), which avoids the initcall magic.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:31 -04:00
Bjorn Helgaas 9cee43e079 ACPI: call acpi_sleep_proc_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_sleep_proc_init() directly.
Previously, acpi_sleep_proc_init() was a late_initcall (sequence 7),
apparently to make sure that the /proc hierarchy already exists:

    2003/02/13 12:38:03-06:00 mochel
    acpi sleep: demote sleep proc file creation.

    - Make acpi_sleep_proc_init() a late_initcall(), and not called from
      acpi_sleep_init(). This guarantees that the acpi proc hierarchy is at
      least there when we create the dang file.

This should no longer be an issue because acpi_bus_init() (called early
in acpi_init()) creates acpi_root_dir (/proc/acpi).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:23 -04:00
Bjorn Helgaas 0e46517d96 ACPI: call init_acpi_device_notify() explicitly rather than as initcall
This patch makes acpi_init() call init_acpi_device_notify() directly.
Previously, init_acpi_device_notify() was an arch_initcall (sequence 3),
so it was called before acpi_init() (a subsys_initcall at sequence 4).

init_acpi_device_notify() sets the platform_notify and
platform_notify_remove function pointers.  These pointers
are not used until acpi_init() enumerates ACPI devices in
this path:

    acpi_init()
	    acpi_scan_init()
		acpi_bus_scan()
		    acpi_add_single_object()
			acpi_device_register()
			    device_add()
				<use platform_notify>

So it is sufficient to have acpi_init() call init_acpi_device_notify()
directly before it enumerates devices.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:16 -04:00
Bjorn Helgaas 84f810c33f ACPI: call acpi_debug_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_debug_init() directly.
Previously, both were subsys_initcalls.  acpi_debug_init()
must happen after acpi_init(), and it's better to call it
explicitly rather than rely on link ordering.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:50:29 -04:00
Bjorn Helgaas 141a0af3ca ACPI: call acpi_system_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_system_init() directly.
Previously, both were subsys_initcalls.  acpi_system_init()
must happen after acpi_init(), and it's better to call it
explicitly rather than rely on link ordering.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:50:19 -04:00
Bjorn Helgaas 44515374cb ACPI: call acpi_power_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_power_init() directly.
Previously, both were subsys_initcalls.  acpi_power_init()
must happen after acpi_init(), and it's better to call it
explicitly rather than rely on link ordering.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:50:11 -04:00
Bjorn Helgaas a5f820feb5 ACPI: call acpi_ec_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_ec_init() directly.
Previously, both were subsys_initcalls.  acpi_ec_init()
must happen after acpi_init(), and it's better to call it
explicitly rather than rely on link ordering.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:50:02 -04:00
Bjorn Helgaas e747f27495 ACPI: call acpi_scan_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_scan_init() directly.

Previously, both acpi_init() and acpi_scan_init() were subsys_initcalls,
and acpi_init() was called first based on the link order from the
makefile (bus.o before scan.o).

acpi_scan_init() registers the ACPI bus type, creates the root device,
and enumerates fixed-feature and namespace devices.  All of this must
be done after acpi_init(), and it's better to call acpi_scan_init()
explicitly rather than rely on the link ordering.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:49:47 -04:00
Bjorn Helgaas 81d0273df2 ACPI: skip DMI power state check when ACPI disabled
This patch makes acpi_init() exit early when ACPI is disabled.
This skips a DMI check that affects ACPI power management.   The
DMI check prints a notice that is misleading when ACPI is disabled.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:49:38 -04:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Bob Moore 03ef132b72 ACPICA: Fix index value in package warning message
For predefined method validation. Index value in warning message
could be off by one.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:06 -04:00