Support the BGR666 format on the IPUv3 parallel display.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of the main things to do to the driver is to support
the common display famework (CDF) to hit mainline. As this will
make some changes to the devicetree bindings necessary it makes
sense to do it before we move out of staging.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver adds support for the Television Encoder integrated
on i.MX53 SoCs (TVEv2).
Currently only the VGA output mode is supported, which only uses
the TVDAC to generate RGB levels. HSYNC and VSYNC signals are
routed directly from the IPU signal generator pins through IOMUXC.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add WRG and WCLK opcodes to the display controller microcode,
and allow multi instruction codes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds display interface timings for the Television Encoder
connected to IPU DI1 on i.MX53 and adds some configuration
glue code to select which IPU signal generators / pins are to
be used for HSYNC/VSYNC signals.
The default configuration is pin2/pin3 for hsync/vsync. The
VGA connector on i.MX53-QSB uses pin7/pin8, and the analog
part of the DVI-I connector on MBa53 connects to pin4/pin6.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
24-bit GBR order is needed on the display interface connected
to the Television Encoder (TVEv2) on i.MX53.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for parsing of the DT display-timings prop
to IPU KMS driver.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The objects allocated by devm_* APIs are managed by devres and are freed
when the device is detached. There is no need to use kfree() explicitly.
Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the bootloader already enabled the display, the interrupt handler
will be called as soon as it is registered. If the CRTC is not already
added at this time, the call to imx_drm_handle_vblank will result in
a NULL pointer dereference.
The patch fixes a kernel panic [1], which has been on linux-next since
Jan 8 [2].
[1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/218858
[2] http://thread.gmane.org/gmane.linux.ports.arm.kernel/208192
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when ipuv3 is probed we have:
imx-ipuv3 40000000.ipu: DI0 base: 0x5e040000 remapped to a08aa000
imx-ipuv3 40000000.ipu: DI1 base: 0x5e048000 remapped to a08ac000
imx-ipuv3 40000000.ipu: IPUv3EX probed
The DI base address and the remapped address are more interesting for debug
purposes, so mark this message as dev_dbg instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following warning when building with W=1 option:
drivers/staging/imx-drm/ipu-v3/ipu-common.c: In function 'ipu_remove':
drivers/staging/imx-drm/ipu-v3/ipu-common.c:1145:19: warning: variable 'res' set but not used [-Wunused-but-set-variable]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kfree(imx_drm_encoder) is already being called at the label
'err_register'.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ipu_reset() can fail with a timeout. Check the return value and act
appropriately.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This has been added once, but does not seem to be necessary. Tested
on i.MX51 and i.MX6.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To allow the iomux to be configured for the display.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's for debugging only, so use dev_dbg.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YVYU is not supported by the IPU, so remove partial handling
of this format and replace it with YUYV which is supported.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No dependency on plat headers, so only needs Kconfig update to
build for ARCH_MULTIPLATFORM.
Signed-off-by: Rob Clark <rob@ti.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indication of succesful probe is more useful than stating that the
driver is about to be probed.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IPU Interrupt numbers and the various IPU submodules base addresses are
more interesting for debugging purposes rather than normal use, so use
dev_dbg instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a i.MX51/53/6 IPU (Image Processing Unit) KMS driver. The
driver has been tested on the i.MX51 babbage board, the i.MX53 LOCO
board and the i.MX6q sabrelite board in different clone mode and dual
head setups.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IPU is the Image Processing Unit found on i.MX51/53/6 SoCs. It
features several units for image processing, this patch adds support
for the units needed for Framebuffer support, namely:
- Display Controller (dc)
- Display Interface (di)
- Display Multi Fifo Controller (dmfc)
- Display Processor (dp)
- Image DMA Controller (idmac)
This patch is based on the Freescale driver, but follows a different
approach. The Freescale code implements logical idmac channels and
the handling of the subunits is hidden in common idmac code pathes
in big switch/case statements. This patch instead just provides code
and resource management for the different subunits. The user, in this
case the framebuffer driver, decides how the different units play
together.
The IPU has other units missing in this patch:
- CMOS Sensor Interface (csi)
- Video Deinterlacer (vdi)
- Sensor Multi FIFO Controler (smfc)
- Image Converter (ic)
- Image Rotator (irt)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support for parallel displays for i.MX. It consists
of a drm encoder/connector pair which eventually passes EDID
data from the devicetree to the drm core.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the i.MX glue stuff between i.MX and drm.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Vasut