This fix was necessary after
9c15a24b03 ("x86/mce: Improve mcheck_init_device() error handling")
went in. What this patch did was, among others, check the return value
of misc_register and exit early if it encountered an error. Original
code sloppily didn't do that.
However,
cef12ee52b ("xen/mce: Add mcelog support for Xen platform")
made it so that xen's init routine xen_late_init_mcelog runs first. This
was needed for the xen mcelog device which is supposed to be independent
from the baremetal one.
Initially it was reported that misc_register() fails often on xen and
that's why it needed fixing. However, it is *supposed* to fail by
design, when running in dom0 so that the xen mcelog device file gets
registered first.
And *then* you need the notifier *not* unregistered on the error path so
that the timer does get deleted properly in the CPU hotplug notifier.
Btw, this fix is needed also on baremetal in the unlikely event that
misc_register(&mce_chrdev_device) fails there too.
I was unsure whether to rush it in now and decided to delay it to 3.17.
However, xen people wanted it promoted as it breaks xen when doing cpu
hotplug there. So, after a bit of simmering in tip/master for initial
smoke testing, let's move it to 3.16. It fixes a semi-regression which
got introduced in 3.16 so no need for stable tagging.
tip/x86/ras contains that exact same commit but we can't remove it
there as it is not the last one. It won't cause any merge issues, as I
confirmed locally but I should state here the special situation of this
one fix explicitly anyway.
Thanks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z/P/
-----END PGP SIGNATURE-----
x86: Merge tag 'ras_urgent' into x86/urgent
Promote one fix for 3.16
This fix was necessary after
9c15a24b03 ("x86/mce: Improve mcheck_init_device() error handling")
went in. What this patch did was, among others, check the return value
of misc_register and exit early if it encountered an error. Original
code sloppily didn't do that.
However,
cef12ee52b ("xen/mce: Add mcelog support for Xen platform")
made it so that xen's init routine xen_late_init_mcelog runs first. This
was needed for the xen mcelog device which is supposed to be independent
from the baremetal one.
Initially it was reported that misc_register() fails often on xen and
that's why it needed fixing. However, it is *supposed* to fail by
design, when running in dom0 so that the xen mcelog device file gets
registered first.
And *then* you need the notifier *not* unregistered on the error path so
that the timer does get deleted properly in the CPU hotplug notifier.
Btw, this fix is needed also on baremetal in the unlikely event that
misc_register(&mce_chrdev_device) fails there too.
I was unsure whether to rush it in now and decided to delay it to 3.17.
However, xen people wanted it promoted as it breaks xen when doing cpu
hotplug there. So, after a bit of simmering in tip/master for initial
smoke testing, let's move it to 3.16. It fixes a semi-regression which
got introduced in 3.16 so no need for stable tagging.
tip/x86/ras contains that exact same commit but we can't remove it
there as it is not the last one. It won't cause any merge issues, as I
confirmed locally but I should state here the special situation of this
one fix explicitly anyway.
Thanks.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Using ARRAY_SIZE directly makes it easier to read the code. While touching
the code, replace the division by a multiplication in the recently added
BUILD_BUG_ON.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently there is no check whether shared MSRs list overrun the allocated size
which can results in bugs. In addition there is no check that vmx->guest_msrs
has sufficient space to accommodate all the VMX msrs. This patch adds the
assertions.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86 does not automatically set rflags.rf during event injection. This patch
does partial job, setting rflags.rf upon fault injection. It does not handle
the setting of RF upon interrupt injection on rep-string instruction.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch updates RF for rep-string emulation. The flag is set upon the first
iteration, and cleared after the last (if emulated). It is intended to make
sure that if a trap (in future data/io #DB emulation) or interrupt is delivered
to the guest during the rep-string instruction, RF will be set correctly. RF
affects whether instruction breakpoint in the guest is masked.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The members of the new struct are the required ones for the new NMI
safe accessor to clcok monotonic. In order to reuse the existing
timekeeping code and to make the update of the fast NMI safe
timekeepers a simple memcpy use the struct for the timekeeper as well
and convert all users.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
cycle_last was added to the clocksource to support the TSC
validation. We moved that to the core code, so we can get rid of the
extra copy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The only user of the cycle_last validation is the x86 TSC. In order to
provide NMI safe accessor functions for clock monotonic and
monotonic_raw we need to do that in the core.
We can't do the TSC specific
if (now < cycle_last)
now = cycle_last;
for the other wrapping around clocksources, but TSC has
CLOCKSOURCE_MASK(64) which actually does not mask out anything so if
now is less than cycle_last the subtraction will give a negative
result. So we can check for that in clocksource_delta() and return 0
for that case.
Implement and enable it for x86
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Convert the relevant base data right away to nanoseconds instead of
doing the conversion on every readout. Reduces text size by 160 bytes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Use the new nanoseconds based interface and get rid of the timespec
conversion dance.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
The non-scalar ktime_t implementation is basically a timespec
which has to be changed to support dates past 2038 on 32bit
systems.
This patch removes the non-scalar ktime_t implementation, forcing
the scalar s64 nanosecond version on all architectures.
This may have additional performance overhead on some 32bit
systems when converting between ktime_t and timespec structures,
however the majority of 32bit systems (arm and i386) were already
using scalar ktime_t, so no performance regressions will be seen
on those platforms.
On affected platforms, I'm open to finding optimizations, including
avoiding converting to timespecs where possible.
[ tglx: We can now cleanup the ktime_t.tv64 mess, but thats a
different issue and we can throw a coccinelle script at it ]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
P4 systems with cpuid level < 4 can have SMT, but the cache topology
description available (cpuid2) does not include SMP information.
Now we know that SMT shares all cache levels, and therefore we can
mark all available cache levels as shared.
We do this by setting cpu_llc_id to ->phys_proc_id, since that's
the same for each SMT thread. We can do this unconditional since if
there's no SMT its still true, the one CPU shares cache with only
itself.
This fixes a problem where such CPUs report an incorrect LLC CPU mask.
This in turn fixes a crash in the scheduler where the topology was
build wrong, it assumes the LLC mask to include at least the SMT CPUs.
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140722133514.GM12054@laptop.lan
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The forthcoming patch will make <acpi/acpi.h> to be visible to all kernel
source code. Thus for the architectures that do not support ACPI and
haven't implemented <asm/acenv.h>, we need to make it excluded.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
GHES currently maps two pages with atomic_ioremap. From now
on, NMI is architectural depended so there is no need to allocate
an NMI page for platforms without NMI support.
To make it possible to not use a second page, swap the existing
page order so that the IRQ context page is first, and the optional
NMI context page is second. Then, use HAVE_ACPI_APEI_NMI to decide
how many pages are to be allocated.
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Currently APEI depends on x86 architecture. It is because of NMI hardware
error notification of GHES which is currently supported by x86 only.
However, many other APEI features can be still used perfectly by other
architectures.
This commit adds two symbols:
1. HAVE_ACPI_APEI for those archs which support APEI.
2. HAVE_ACPI_APEI_NMI which is used for NMI code isolation in ghes.c
file. NMI related data and functions are grouped so they can be wrapped
inside one #ifdef section. Appropriate function stubs are provided for
!NMI case.
Note there is no functional changes for x86 due to hard selected
HAVE_ACPI_APEI and HAVE_ACPI_APEI_NMI symbols.
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This commit abstracts MCE calls and provides weak corresponding default
implementation for those architectures which do not need arch specific
actions. Each platform willing to do additional architectural actions
should provides desired function definition. It allows us to avoid wrap
code into #ifdef in generic code and prevent new platform from introducing
dummy stub function too.
Initially, there are two APEI arch-specific calls:
- arch_apei_enable_cmcff()
- arch_apei_report_mem_error()
Both interact with MCE driver for X86 architecture.
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Commit 554086d ("x86_32, entry: Do syscall exit work on badsys
(CVE-2014-4508)") introduced a regression in the x86_32 syscall entry
code, resulting in syscall() not returning proper errors for undefined
syscalls on CPUs supporting the sysenter feature.
The following code:
> int result = syscall(666);
> printf("result=%d errno=%d error=%s\n", result, errno, strerror(errno));
results in:
> result=666 errno=0 error=Success
Obviously, the syscall return value is the called syscall number, but it
should have been an ENOSYS error. When run under ptrace it behaves
correctly, which makes it hard to debug in the wild:
> result=-1 errno=38 error=Function not implemented
The %eax register is the return value register. For debugging via ptrace
the syscall entry code stores the complete register context on the
stack. The badsys handlers only store the ENOSYS error code in the
ptrace register set and do not set %eax like a regular syscall handler
would. The old resume_userspace call chain contains code that clobbers
%eax and it restores %eax from the ptrace registers afterwards. The same
goes for the ptrace-enabled call chain. When ptrace is not used, the
syscall return value is the passed-in syscall number from the untouched
%eax register.
Use %eax as the return value register in syscall_badsys and
sysenter_badsys, like a real syscall handler does, and have the caller
push the value onto the stack for ptrace access.
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Link: http://lkml.kernel.org/r/alpine.LNX.2.11.1407221022380.31021@titan.int.lan.stealer.net
Reviewed-and-tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: <stable@vger.kernel.org> # If 554086d is backported
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
an x86 change too and it is a regression from 3.14. As it only affects
nested virtualization and there were other changes in this area in 3.16,
I am not nominating it for 3.15-stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Vdqn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"These are mostly PPC changes for 3.16-new things. However, there is
an x86 change too and it is a regression from 3.14. As it only
affects nested virtualization and there were other changes in this
area in 3.16, I am not nominating it for 3.15-stable"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Check for nested events if there is an injectable interrupt
KVM: PPC: RTAS: Do byte swaps explicitly
KVM: PPC: Book3S PR: Fix ABIv2 on LE
KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC()
PPC: Add _GLOBAL_TOC for 32bit
KVM: PPC: BOOK3S: HV: Use base page size when comparing against slb value
KVM: PPC: Book3E: Unlock mmu_lock when setting caching atttribute
BorisO reports that misc_register() fails often on xen. The current code
unregisters the CPU hotplug notifier in that case. If then a CPU is
offlined and onlined back again, we end up with a second timer running
on that CPU, leading to soft lockups and system hangs.
So let's leave the hotcpu notifier always registered - even if
mce_device_create failed for some cores and never unreg it so that we
can deal with the timer handling accordingly.
Reported-and-Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1403274493-1371-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Haswell and newer Intel CPUs have support for RTM, and in that case DR6.RTM is
not fixed to 1 and DR7.RTM is not fixed to zero. That is not the case in the
current KVM implementation. This bug is apparent only if the MOV-DR instruction
is emulated or the host also debugs the guest.
This patch is a partial fix which enables DR6.RTM and DR7.RTM to be cleared and
set respectively. It also sets DR6.RTM upon every debug exception. Obviously,
it is not a complete fix, as debugging of RTM is still unsupported.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
free_nested needs the loaded_vmcs to be valid if it is a vmcs02, in
order to detach it from the shadow vmcs. However, this is not
available anymore after commit 26a865f4aa (KVM: VMX: fix use after
free of vmx->loaded_vmcs, 2014-01-03).
Revert that patch, and fix its problem by forcing a vmcs01 as the
active VMCS before freeing all the nested VMX state.
Reported-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The use of _PDC is deprecated in ACPI 3.0 in favor of _OSC,
as ARM platform is supported only in ACPI 5.0 or higher version,
_PDC will not be used in ARM platform, so make Make _PDC only for
platforms with Intel CPUs.
Introduce ARCH_MIGHT_HAVE_ACPI_PDC and move _PDC related code in
ACPI processor driver into a single file processor_pdc.c, make x86
and ia64 select it when ACPI is enabled.
This patch also use pr_* to replace printk to fix the checkpatch
warning and factor acpi_processor_alloc_pdc() a little bit to
avoid duplicate pr_err() code.
Suggested-by: Robert Richter <rric@kernel.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now ARM64 support is being added to ACPI so architecture specific
values can not be used in core ACPI code.
Following on the patch "ACPI / processor: Check if LAPIC is present
during initialization" which uses acpi_lapic in acpi_processor.c,
on ARM64 platform, GIC is used instead of local APIC, so acpi_lapic
is not a suitable value for ARM64.
What is actually important at this point is if there is/are CPU
entry/entries (Local APIC/SAPIC, GICC) in MADT, so introduce
acpi_has_cpu_in_madt() to be arch specific and generic.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With the addition of ARM64 that does not have a traditional BIOS to
scan, add a config option which is selected on x86 (ia64 doesn't need
it either, it is EFI/UEFI based system) to do the traditional BIOS
scanning for tables.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the RFLAGS.RF is set, then no #DB should occur on instruction breakpoints.
However, the KVM emulator injects #DB regardless to RFLAGS.RF. This patch fixes
this behavior. KVM, however, still appears not to update RFLAGS.RF correctly,
regardless of this patch.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RFLAGS.RF was cleaned in several functions (e.g., syscall) in the x86 emulator.
Now that we clear it before the execution of an instruction in the emulator, we
can remove the specific cleanup of RFLAGS.RF.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an instruction is emulated RFLAGS.RF should be cleared. KVM previously did
not do so. This patch clears RFLAGS.RF after interception is done. If a fault
occurs during the instruction, RFLAGS.RF will be set by a previous patch. This
patch does not handle the case of traps/interrupts during rep-strings. Traps
are only expected to occur on debug watchpoints, and those are anyhow not
handled by the emulator.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RFLAGS.RF is always zero after popf. Therefore, popf should not updated RF, as
anyhow emulating popf, just as any other instruction should clear RFLAGS.RF.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When skipping an emulated instruction, rflags.rf should be cleared as it would
be on real x86 CPU.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull locking fixes from Thomas Gleixner:
"The locking department delivers:
- A rather large and intrusive bundle of fixes to address serious
performance regressions introduced by the new rwsem / mcs
technology. Simpler solutions have been discussed, but they would
have been ugly bandaids with more risk than doing the right thing.
- Make the rwsem spin on owner technology opt-in for architectures
and enable it only on the known to work ones.
- A few fixes to the lockdep userspace library"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER
locking/mutex: Disable optimistic spinning on some architectures
locking/rwsem: Reduce the size of struct rw_semaphore
locking/rwsem: Rename 'activity' to 'count'
locking/spinlocks/mcs: Micro-optimize osq_unlock()
locking/spinlocks/mcs: Introduce and use init macro and function for osq locks
locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead
locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node()
locking/rwsem: Allow conservative optimistic spinning when readers have lock
tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire
tools/liblockdep: Remove debug print left over from development
tools/liblockdep: Fix comparison of a boolean value with a value of 2
Pull x86 fixes from Peter Anvin:
"A couple of key fixes and a few less critical ones. The main ones
are:
- add a .bss section to the PE/COFF headers when building with EFI
stub
- invoke the correct paravirt magic when building the espfix page
tables
Unfortunately both of these areas also have at least one additional
fix each still in thie pipeline, but which are not yet ready to push"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Remove unused variable "polling"
x86/espfix/xen: Fix allocation of pages for paravirt page tables
x86/efi: Include a .bss section within the PE/COFF headers
efi: fdt: Do not report an error during boot if UEFI is not available
efi/arm64: efistub: remove local copy of linux_banner
Compiler complains in the following way when x86 32-bit kernel
with Xen support is build:
CC arch/x86/xen/enlighten.o
arch/x86/xen/enlighten.c: In function ‘xen_start_kernel’:
arch/x86/xen/enlighten.c:1726:3: warning: right shift count >= width of type [enabled by default]
Such line contains following EFI initialization code:
boot_params.efi_info.efi_systab_hi = (__u32)(__pa(efi_systab_xen) >> 32);
There is no issue if x86 64-bit kernel is build. However, 32-bit case
generate warning (even if that code will not be executed because Xen
does not work on 32-bit EFI platforms) due to __pa() returning unsigned long
type which has 32-bits width. So move whole EFI initialization stuff
to separate function and build it conditionally to avoid above mentioned
warning on x86 32-bit architecture.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The EFI boot stub goes to great pains to relocate the kernel image to
an appropriately aligned address, as indicated by the ->kernel_alignment
field in the bzImage header. However, for the PE stub entry case, we
can request that the EFI PE/COFF loader do the work for us.
Fix by exposing the desired alignment via the SectionAlignment field
in the PE/COFF headers. Despite its name, this field provides an
overall alignment requirement for the loaded file. (Naturally, the
FileAlignment field describes the alignment for individual sections.)
There is no way in the PE/COFF headers to express the concept of
min_alignment; we therefore do not expose the minimum (as opposed to
preferred) alignment.
Signed-off-by: Michael Brown <mbrown@fensystems.co.uk>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Hopefully this will enable us to better debug:
https://bugzilla.kernel.org/show_bug.cgi?id=68761
Signed-off-by: Ulf Winkelvos <ulf@winkelvos.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
efi_set_rtc_mmss() is never used to set RTC due to bugs found
on many EFI platforms. It is set directly by mach_set_rtc_mmss().
Hence, remove unused efi_set_rtc_mmss() function.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
We've got constants, so let's use them instead of hard-coded values.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This patch enables EFI usage under Xen dom0. Standard EFI Linux
Kernel infrastructure cannot be used because it requires direct
access to EFI data and code. However, in dom0 case it is not possible
because above mentioned EFI stuff is fully owned and controlled
by Xen hypervisor. In this case all calls from dom0 to EFI must
be requested via special hypercall which in turn executes relevant
EFI code in behalf of dom0.
When dom0 kernel boots it checks for EFI availability on a machine.
If it is detected then artificial EFI system table is filled.
Native EFI callas are replaced by functions which mimics them
by calling relevant hypercall. Later pointer to EFI system table
is passed to standard EFI machinery and it continues EFI subsystem
initialization taking into account that there is no direct access
to EFI boot services, runtime, tables, structures, etc. After that
system runs as usual.
This patch is based on Jan Beulich and Tang Liang work.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Tang Liang <liang.tang@oracle.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Remove redundant set_bit(EFI_MEMMAP, &efi.flags) call.
It is executed earlier in efi_memmap_init().
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Remove redundant set_bit(EFI_SYSTEM_TABLES, &efi.flags) call.
It is executed earlier in efi_systab_init().
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Introduce EFI_PARAVIRT flag. If it is set then kernel runs
on EFI platform but it has not direct control on EFI stuff
like EFI runtime, tables, structures, etc. If not this means
that Linux Kernel has direct access to EFI infrastructure
and everything runs as usual.
This functionality is used in Xen dom0 because hypervisor
has full control on EFI stuff and all calls from dom0 to
EFI must be requested via special hypercall which in turn
executes relevant EFI code in behalf of dom0.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Do not access EFI memory map if it is not available. At least
Xen dom0 EFI implementation does not have an access to it.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Use early_mem*() instead of early_io*() because all mapped EFI regions
are memory (usually RAM but they could also be ROM, EPROM, EEPROM, flash,
etc.) not I/O regions. Additionally, I/O family calls do not work correctly
under Xen in our case. early_ioremap() skips the PFN to MFN conversion
when building the PTE. Using it for memory will attempt to map the wrong
machine frame. However, all artificial EFI structures created under Xen
live in dom0 memory and should be mapped/unmapped using early_mem*() family
calls which map domain memory.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
It appears that the BayTrail-T class of hardware requires EFI in order
to powerdown and reboot and no other reliable method exists.
This quirk is generally applicable to all hardware that has the ACPI
Hardware Reduced bit set, since usually ACPI would be the preferred
method.
Cc: Len Brown <len.brown@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Implement efi_reboot(), which is really just a wrapper around the
EfiResetSystem() EFI runtime service, but it does at least allow us to
funnel all callers through a single location.
It also simplifies the callsites since users no longer need to check to
see whether EFI_RUNTIME_SERVICES are enabled.
Cc: Tony Luck <tony.luck@intel.com>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This patch changes both x86 and arm64 efistub implementations
from #including shared .c files under drivers/firmware/efi to
building shared code as a static library.
The x86 code uses a stub built into the boot executable which
uncompresses the kernel at boot time. In this case, the library is
linked into the decompressor.
In the arm64 case, the stub is part of the kernel proper so the library
is linked into the kernel proper as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This adds the new "seccomp" syscall with both an "operation" and "flags"
parameter for future expansion. The third argument is a pointer value,
used with the SECCOMP_SET_MODE_FILTER operation. Currently, flags must
be 0. This is functionally equivalent to prctl(PR_SET_SECCOMP, ...).
In addition to the TSYNC flag later in this patch series, there is a
non-zero chance that this syscall could be used for configuring a fixed
argument area for seccomp-tracer-aware processes to pass syscall arguments
in the future. Hence, the use of "seccomp" not simply "seccomp_add_filter"
for this syscall. Additionally, this syscall uses operation, flags,
and user pointer for arguments because strictly passing arguments via
a user pointer would mean seccomp itself would be unable to trivially
filter the seccomp syscall itself.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Nothing sets function_trace_stop to disable function tracing anymore.
Remove the check for it in the arch code.
Link: http://lkml.kernel.org/r/53C54D32.6000000@zytor.com
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.
Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.
Link: http://lkml.kernel.org/r/53C54D18.3020602@zytor.com
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_stop() is used to stop function tracing during suspend and resume
which removes a lot of possible debugging opportunities with tracing.
The reason was that some function in the resume path was causing a triple
fault if it were to be traced. The issue I found was that doing something
as simple as calling smp_processor_id() would reboot the box!
When function tracing was first created I didn't have a good way to figure
out what function was having issues, or it looked to be multiple ones. To
fix it, we just created a big hammer approach to the problem which was to
add a flag in the mcount trampoline that could be checked and not call
the traced functions.
Lately I developed better ways to find problem functions and I can bisect
down to see what function is causing the issue. I removed the flag that
stopped tracing and proceeded to find the problem function and it ended
up being restore_processor_state(). This function makes sense as when the
CPU comes back online from a suspend it calls this function to set up
registers, amongst them the GS register, which stores things such as
what CPU the processor is (if you call smp_processor_id() without this
set up properly, it would fault).
By making restore_processor_state() notrace, the system can suspend and
resume without the need of the big hammer tracing to stop.
Link: http://lkml.kernel.org/r/3577662.BSnUZfboWb@vostro.rjw.lan
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function graph trampoline is called from the function trampoline
and both do a save and restore of registers. The save of registers
done by the function trampoline when only the function graph tracer
is running is a waste of CPU cycles.
As the function graph tracer trampoline in x86 is dependent from
the function trampoline, we can call it directly when a function
is only being traced by the function graph trampoline.
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch fix bug reported in https://bugzilla.kernel.org/show_bug.cgi?id=73331,
after the patch http://www.spinics.net/lists/kvm/msg105230.html applied, there is
some progress and the L2 can boot up, however, slowly. The original idea of this
fix vid injection patch is from "Zhang, Yang Z" <yang.z.zhang@intel.com>.
Interrupt which delivered by vid should be injected to L1 by L0 if current is in
L1, or should be injected to L2 by L0 through the old injection way if L1 doesn't
have set External-interrupt exiting bit. The current logic doen't consider these
cases. This patch fix it by vid intr to L1 if current is L1 or L2 through old
injection way if L1 doen't have External-interrupt exiting bit set.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: "Zhang, Yang Z" <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The arch_mutex_cpu_relax() function, introduced by 34b133f, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.
This patch (i) renames the call to cpu_relax_lowlatency ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharat Bhushan <r65777@freescale.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Stratos Karafotis <stratosk@semaphore.gr>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently perf-kvm uses string literals for kvm event names, but it
works only for x86, because other architectures may have other names for
those events.
To reduce dependence on architecture, we add <asm/kvm_perf.h> file with
defines for:
- kvm_entry and kvm_exit events,
- exit reason field name in kvm_exit event,
- length of exit reasons strings,
- vcpu_id field name in kvm trace events,
and replace literals in perf-kvm.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404397747-20939-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Tooling fixes and an Intel PMU driver fixlet"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Do not allow optimized switch for non-cloned events
perf/x86/intel: ignore CondChgd bit to avoid false NMI handling
perf symbols: Get kernel start address by symbol name
perf tools: Fix segfault in cumulative.callchain report
Add a new "name" attribute to the TS5500 sysfs group, to clarify
which supported board model it is.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>
Link: http://lkml.kernel.org/r/1404860269-11837-3-git-send-email-vivien.didelot@savoirfairelinux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the DEVICE_ATTR_RO() helper macro to simplify the declaration
of read-only sysfs attributes in the TS5500 code..
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Savoir-faire Linux Inc. <kernel@savoirfairelinux.com>
Link: http://lkml.kernel.org/r/1404860269-11837-2-git-send-email-vivien.didelot@savoirfairelinux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 30919b0bf3 ("x86: avoid low BIOS area when allocating address
space") moved the test for resource allocations that fall within the first
1MB of address space from the PCI-specific path to a generic path, such
that all resource allocations will avoid this area. However, this breaks
ISA cards which need to allocate a memory region within the first 1MB. An
example is the i82365 PCMCIA controller and derivatives like the Ricoh
RF5C296/396 which map part of the PCMCIA socket memory address space into
the first 1MB of system memory address space. They do not work anymore as
no usable memory region exists due to this change:
Intel ISA PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
host opts [0]: none
host opts [1]: none
ISA irqs (scanned) = 3,4,5,9,10 status change on irq 10
pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0e0000-0x0effff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
pcmcia_socket pcmcia_socket1: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
pcmcia_socket pcmcia_socket1: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: clean.
pcmcia_socket pcmcia_socket1: cs: memory probe 0x0e0000-0x0effff: clean.
pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket1: cs: memory probe 0x0cc000-0x0effff: excluding 0xe0000-0xeffff
pcmcia_socket pcmcia_socket1: cs: unable to map card memory!
If filtering out the first 1MB is reverted, everything works as expected.
Tested-by: Robert Resch <fli4l@robert.reschpara.de>
Signed-off-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v2.6.37+
With the conversion of the register saving code from macros to
functions, and with those functions not clobbering most of the
registers they spill, there's no need to annotate most of the
spill operations; the only exceptions being %rbx (always
modified) and %rcx (modified on the error_kernelspace: path).
Also remove a bogus commented out annotation - there's no
register %orig_rax after all.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/53AAE69A020000780001D3C7@mail.emea.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The optimistic spin code assumes regular stores and cmpxchg() play nice;
this is found to not be true for at least: parisc, sparc32, tile32,
metag-lock1, arc-!llsc and hexagon.
There is further wreckage, but this in particular seemed easy to
trigger, so blacklist this.
Opt in for known good archs.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: John David Anglin <dave.anglin@bell.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: stable@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit:
commit 6f6343f53d
Author: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Thu Apr 17 17:17:33 2014 +0900
kprobes/x86: Call exception handlers directly from do_int3/do_debug
appears to have inadvertently dropped a check that the int3 came
from kernel mode. Trying to dereference addr when addr is
user-controlled is completely bogus.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/c4e339882c121aa76254f2adde3fcbdf502faec2.1405099506.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It's unnecessary to excessively spam the kernel log anytime the BTS buffer
cannot be allocated, so make this allocation __GFP_NOWARN.
The user probably will want to at least find some artifact that the
allocation has failed in the past, probably due to fragmentation because
of its large size, when it's not allocated at bootstrap. Thus, add a
WARN_ONCE() so something is left behind for them to understand why perf
commnads that require PEBS is not working properly.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1406301600460.26302@chino.kir.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
According to Peter's advice, put the failure handling to a goto chain.
Compiled in x86_64, could you check if there is anything that I missed.
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1402459743-20513-1-git-send-email-zhouzhouyi@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With -cpu host, KVM reports LBR and extra_regs support, if the host has
support.
When the guest perf driver tries to access LBR or extra_regs MSR,
it #GPs all MSR accesses,since KVM doesn't handle LBR and extra_regs support.
So check the related MSRs access right once at initialization time to avoid
the error access at runtime.
For reproducing the issue, please build the kernel with CONFIG_KVM_INTEL = y
(for host kernel).
And CONFIG_PARAVIRT = n and CONFIG_KVM_GUEST = n (for guest kernel).
Start the guest with -cpu host.
Run perf record with --branch-any or --branch-filter in guest to trigger LBR
Run perf stat offcore events (E.g. LLC-loads/LLC-load-misses ...) in guest to
trigger offcore_rsp #GP
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: Mark Davies <junk@eslaf.co.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1405365957-20202-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes the SNB-EP and IVT Cbox filter mapping
table. The table controls which filters are supported by
which events. There were several mistakes in those tables
causing some filters to be ignored, such as NID on
TOR_INSERTS.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: zheng.z.yan@intel.com
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140630144624.GA2604@quad
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This was discussed back in February:
https://lkml.org/lkml/2014/2/18/956
But I never saw a patch come out of it.
On IvyBridge we share the SandyBridge cache event tables, but the
dTLB-load-miss event is not compatible. Patch it up after
the fact to the proper DTLB_LOAD_MISSES.DEMAND_LD_MISS_CAUSES_A_WALK
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1407141528200.17214@vincent-weaver-1.umelst.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
init_espfix_ap() is currently off by one level when informing hypervisor
that allocated pages will be used for ministacks' page tables.
The most immediate effect of this on a PV guest is that if
'stack_page = __get_free_page()' returns a non-zeroed-out page the hypervisor
will refuse to use it for a page table (which it shouldn't be anyway). This will
result in warnings by both Xen and Linux.
More importantly, a subsequent write to that page (again, by a PV guest) is
likely to result in fatal page fault.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1404926298-5565-1-git-send-email-boris.ostrovsky@oracle.com
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
which, apart from reducing code duplication also stops the arm64 stub
being rebuilt every time make is invoked - Ard Biesheuvel
* Fix the EFI fdt code to not report a boot error if UEFI is
unavailable since booting without UEFI parameters is a valid use case
for non-UEFI platforms - Catalin Marinas
* Include a .bss section in the EFI boot stub PE/COFF headers to fix a
memory corruption bug - Michael Brown
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Cvne
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' into x86/urgent
* Remove a duplicate copy of linux_banner from the arm64 EFI stub
which, apart from reducing code duplication also stops the arm64 stub
being rebuilt every time make is invoked - Ard Biesheuvel
* Fix the EFI fdt code to not report a boot error if UEFI is
unavailable since booting without UEFI parameters is a valid use case
for non-UEFI platforms - Catalin Marinas
* Include a .bss section in the EFI boot stub PE/COFF headers to fix a
memory corruption bug - Michael Brown
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Since 11c7ff17c9 (xen/grant-table: Force
to use v1 of grants.) the code for V2 grant tables is not used.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
arch_gnttab_map_frames() and arch_gnttab_unmap_frames() are called in
atomic context but were calling alloc_vm_area() which might sleep.
Also, if a driver attempts to allocate a grant ref from an interrupt
and the table needs expanding, then the CPU may already by in lazy MMU
mode and apply_to_page_range() will BUG when it tries to re-enable
lazy MMU mode.
These two functions are only used in PV guests.
Introduce arch_gnttab_init() to allocates the virtual address space in
advance.
Avoid the use of apply_to_page_range() by using saving and using the
array of PTE addresses from the alloc_vm_area() call.
N.B. 'alloc_vm_area' pre-allocates the pagetable so there is no need
to worry about having to do a PGD/PUD/PMD walk (like apply_to_page_range
does) and we can instead do set_pte.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
----
[v2: Add comment about alloc_vm_area]
[v3: Fix compile error found by 0-day bot]
Distribute family-specific code to corresponding functions.
Also,
* move the direct mapping splitting around the TSEG SMM area to
bsp_init_amd().
* kill ancient comment about what we should do for K5.
* merge amd_k7_smp_check() into its only caller init_amd_k7 and drop
cpu_has_mp macro.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1403609105-8332-3-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Dump the flags which denote we have detected and/or have applied bug
workarounds to the CPU we're executing on, in a similar manner to the
feature flags.
The advantage is that those are not accumulating over time like the CPU
features.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1403609105-8332-2-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Commit 9f354b0252 "x86, irq: Clean up unused IOAPIC interface" kills
interface io_apic_set_pci_routing(), so change arch/x86/platform/
intel-mid/device_libs/platform_wdt.c to use new interfaces.
Due to hardware resource restriction, this patch only passes compilation
without functional tests.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: David Cohen <david.a.cohen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Tang Feng <feng.tang@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1403490643-26187-1-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
By default when CONFIG_XEN and CONFIG_XEN_PVHVM kernels are
run, they will enable the PV extensions (drivers, interrupts, timers,
etc) - which is the best option for the majority of use cases.
However, in some cases (kexec not fully working, benchmarking)
we want to disable Xen PV extensions. As such introduce the
'xen_nopv' parameter that will do it.
This parameter is intended only for HVM guests as the Xen PV
guests MUST boot with PV extensions. However, even if you use
'xen_nopv' on Xen PV guests it will be ignored.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
---
[v2: s/off/xen_nopv/ per Boris Ostrovsky recommendation.]
[v3: Add Reviewed-by]
[v4: Clarify that this is only for HVM guests]
When a vSMP Foundation box is detected, the function apic_cluster_num() counts
the number of APIC clusters found. If more than one found, a multi board
configuration is assumed, and TSC marked as unstable. This behavior is
incorrect as vSMP Foundation may use processors from single node only, attached
to memory of other nodes - and such node may have more than one APIC cluster
(typically any recent intel box has more than single APIC_CLUSTERID(x)).
To fix this, we simply remove the code which detects a vSMP Foundation box and
affects apic_is_clusted_box() return value. This can be done because later the
kernel checks by itself if the TSC is stable using the
check_tsc_sync_[source|target]() functions and marks TSC as unstable if needed.
Acked-by: Shai Fultheim <shai@scalemp.com>
Signed-off-by: Oren Twaig <oren@scalemp.com>
Link: http://lkml.kernel.org/r/1404036068-11674-1-git-send-email-oren@scalemp.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Both the 32-bit and 64-bit cmpxchg.h header define __HAVE_ARCH_CMPXCHG
and there's ifdeffery which checks it. But since both bitness define it,
we can just as well move it up to the main cmpxchg header and simpify a
bit of code in doing that.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20140711104338.GB17083@pd.tnic
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull x86 fixes from Peter Anvin:
"A couple of further build fixes for the VDSO code.
This is turning into a bit of a headache, and Andy has already come up
with a more ultimate cleanup, but most likely that is 3.17 material"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-32, vdso: Fix vDSO build error due to missing align_vdso_addr()
x86-64, vdso: Fix vDSO build breakage due to empty .rela.dyn
Now that we can tolerate extra things dangling off the end of the
vdso image, we can strip the vdso the old fashioned way rather than
using an overcomplicated custom stripping algorithm.
This is a partial reversion of:
6f121e5 x86, vdso: Reimplement vdso.so preparation in build-time C
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/50e01ed6dcc0575d20afd782f9fe98d5ee3e2d8a.1405040914.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Putting the vvar area after the vdso text is rather complicated: it
only works of the total length of the vdso text mapping is known at
vdso link time, and the linker doesn't allow symbol addresses to
depend on the sizes of non-allocatable data after the PT_LOAD
segment.
Moving the vvar area before the vdso text will allow is to safely
map non-allocatable data after the vdso text, which is a nice
simplification.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/156c78c0d93144ff1055a66493783b9e56813983.1405040914.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Certain instructions (e.g., mwait and monitor) cause a #UD exception when they
are executed in user mode. This is in contrast to the regular privileged
instructions which cause #GP. In order not to mess with SVM interception of
mwait and monitor which assumes privilege level assertions take place before
interception, a flag has been added.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain instructions, such as monitor and xsave do not support big real mode
and cause a #GP exception if any of the accessed bytes effective address are
not within [0, 0xffff]. This patch introduces a flag to mark these
instructions, including the necassary checks.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulator accesses are always done a page at a time, either by the emulator
itself (for fetches) or because we need to query the MMU for address
translations. Speed up these accesses by using kvm_read_guest_page
and, in the case of fetches, by inlining kvm_read_guest_virt_helper and
dropping the loop around kvm_read_guest_page.
This final tweak saves 30-100 more clock cycles (4-10%), bringing the
count (as measured by kvm-unit-tests) down to 720-1100 clock cycles on
a Sandy Bridge Xeon host, compared to 2300-3200 before the whole series
and 925-1700 after the first two low-hanging fruit changes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the CS base is not page-aligned, the linear address of the code could
get close to the page boundary (e.g. 0x...ffe) even if the EIP value is
not. So we need to first linearize the address, and only then compute
the number of valid bytes that can be fetched.
This happens relatively often when executing real mode code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We do not need a memory copying loop anymore in insn_fetch; we
can use a byte-aligned pointer to access instruction fields directly
from the fetch_cache. This eliminates 50-150 cycles (corresponding to
a 5-10% improvement in performance) from each instruction.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
do_insn_fetch_bytes will only be called once in a given insn_fetch and
insn_fetch_arr, because in fact it will only be called at most twice
for any instruction and the first call is explicit in x86_decode_insn.
This observation lets us hoist the call out of the memory copying loop.
It does not buy performance, because most fetches are one byte long
anyway, but it prepares for the next patch.
The overflow check is tricky, but correct. Because do_insn_fetch_bytes
has already been called once, we know that fc->end is at least 15. So
it is okay to subtract the number of bytes we want to read.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hoist the common case up from do_insn_fetch_byte to do_insn_fetch,
and prime the fetch_cache in x86_decode_insn. This helps a bit the
compiler and the branch predictor, but above all it lays the
ground for further changes in the next few patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
rip_relative is only set if decode_modrm runs, and if you have ModRM
you will also have a memopp. We can then access memopp unconditionally.
Note that rip_relative cannot be hoisted up to decode_modrm, or you
break "mov $0, xyz(%rip)".
Also, move typecast on "out of range value" of mem.ea to decode_modrm.
Together, all these optimizations save about 50 cycles on each emulated
instructions (4-6%).
Signed-off-by: Bandan Das <bsd@redhat.com>
[Fix immediate operands with rip-relative addressing. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_decode_insn already sets a default for seg_override,
so remove it from the zeroed area. Also replace set/get functions
with direct access to the field.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A lot of initializations are unnecessary as they get set to
appropriate values before actually being used. Optimize
placement of fields in x86_emulate_ctxt
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the if conditional - that will help us avoid
an "else initialize to 0" Also, rearrange operators
for slightly better code.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The same information can be gleaned from ctxt->d and avoids having
to zero/NULL initialize intercept and check_perm
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Core emulator functions all belong in emulator.c,
x86 should have no knowledge of emulator internals
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "if/return" checks are useless, because we return X86EMUL_CONTINUE
anyway if we do not return.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can just blindly move all 16 bytes of ctxt->src's value to ctxt->dst.
write_register_operand will take care of writing only the lower bytes.
Avoiding a call to memcpy (the compiler optimizes it out) gains about
200 cycles on kvm-unit-tests for register-to-register moves, and makes
them about as fast as arithmetic instructions.
We could perhaps get a larger speedup by moving all instructions _except_
moves out of x86_emulate_insn, removing opcode_len, and replacing the
switch statement with an inlined em_mov.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several checks for "peculiar" aspects of instructions in both
x86_decode_insn and x86_emulate_insn. Group them together, and guard
them with a single "if" that lets the processor quickly skip them all.
Make this more effective by adding two more flag bits that say whether the
.intercept and .check_perm fields are valid. We will reuse these
flags later to avoid initializing fields of the emulate_ctxt struct.
This skims about 30 cycles for each emulated instructions, which is
approximately a 3% improvement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Despite the provisions to emulate up to 130 consecutive instructions, in
practice KVM will emulate just one before exiting handle_invalid_guest_state,
because x86_emulate_instruction always sets KVM_REQ_EVENT.
However, we only need to do this if an interrupt could be injected,
which happens a) if an interrupt shadow bit (STI or MOV SS) has gone
away; b) if the interrupt flag has just been set (other instructions
than STI can set it without enabling an interrupt shadow).
This cuts another 700-900 cycles from the cost of emulating an
instruction (measured on a Sandy Bridge Xeon: 1650-2600 cycles
before the patch on kvm-unit-tests, 925-1700 afterwards).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the next patch we will need to know the full state of the
interrupt shadow; we will then set KVM_REQ_EVENT when one bit
is cleared.
However, right now get_interrupt_shadow only returns the one
corresponding to the emulated instruction, or an unconditional
0 if the emulated instruction does not have an interrupt shadow.
This is confusing and does not allow us to check for cleared
bits as mentioned above.
Clean the callback up, and modify toggle_interruptibility to
match the comment above the call. As a small result, the
call to set_interrupt_shadow will be skipped in the common
case where int_shadow == 0 && mask == 0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
About 25% of the time spent in emulation of invalid guest state
is wasted in checking whether emulation is required for the next
instruction. However, this almost never changes except when a
segment register (or TR or LDTR) changes, or when there is a mode
transition (i.e. CR0 changes).
In fact, vmx_set_segment and vmx_set_cr0 already modify
vmx->emulation_required (except that the former for some reason
uses |= instead of just an assignment). So there is no need to
call guest_state_valid in the emulation loop.
Emulation performance test results indicate 1650-2600 cycles
for common instructions, versus 2300-3200 before this patch on
a Sandy Bridge Xeon.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 575203 the MCE subsystem in the Linux kernel for AMD sets bit 18
in MSR_K7_HWCR. Running such a kernel as a guest in KVM on an AMD host results
in a GPE injected into the guest because kvm_set_msr_common returns 1. This
patch fixes this by masking bit 18 from the MSR value desired by the guest.
Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We encountered a scenario in which after an INIT is delivered, a pending
interrupt is delivered, although it was sent before the INIT. As the SDM
states in section 10.4.7.1, the ISR and the IRR should be cleared after INIT as
KVM does. This also means that pending interrupts should be cleared. This
patch clears upon reset (and INIT) the pending interrupts; and at the same
occassion clears the pending exceptions, since they may cause a similar issue.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have noticed that qemu-kvm hangs early in the BIOS when runnning nested
under some versions of VMware ESXi.
The problem we believe is because KVM assumes that the platform preserves
the 'G' but for any segment register. The SVM specification itemizes the
segment attribute bits that are observed by the CPU, but the (G)ranularity bit
is not one of the bits itemized, for any segment. Though current AMD CPUs keep
track of the (G)ranularity bit for all segment registers other than CS, the
specification does not require it. VMware's virtual CPU may not track the
(G)ranularity bit for any segment register.
Since kvm already synthesizes the (G)ranularity bit for the CS segment. It
should do so for all segments. The patch below does that, and helps get rid of
the hangs. Patch applies on top of Linus' tree.
Signed-off-by: Jim Mattson <jmattson@vmware.com>
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Relying on static functions used just once to get inlined (and
subsequently have dead code paths eliminated) is wrong: Compilers are
free to decide whether they do this, regardless of optimization level.
With this not happening for vdso_addr() (observed with gcc 4.1.x), an
unresolved reference to align_vdso_addr() causes the build to fail.
[ hpa: vdso_addr() is never actually used on x86-32, as calculate_addr
in map_vdso() is always false. It ought to be possible to clean
this up further, but this fixes the immediate problem. ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/53B5863B02000078000204D5@mail.emea.novell.com
Acked-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Certain ld versions (observed with 2.20.0) put an empty .rela.dyn
section into shared object files, breaking the assumption on the number
of sections to be copied to the final output. Simply discard any empty
SHT_REL and SHT_RELA sections to address this.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/53B5861E02000078000204D1@mail.emea.novell.com
Acked-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Commit b4aa016305 ("efifb: Implement vga_default_device() (v2)") added
efifb vga_default_device() so EFI systems that do not load shadow VBIOS or
setup VGA get proper value for boot_vga PCI sysfs attribute on the
corresponding PCI device.
Xorg doesn't detect devices when boot_vga=0, e.g., on some EFI systems such
as MacBookAir2,1. Xorg detects the GPU and finds the DRI device but then
bails out with "no devices detected".
Note: When vga_default_device() is set boot_vga PCI sysfs attribute
reflects its state. When unset this attribute is 1 whenever
IORESOURCE_ROM_SHADOW flag is set.
With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete
while having native drivers for the GPU also makes selecting sysfb/efifb
optional.
Remove the efifb implementation of vga_default_device() and initialize
vgaarb's vga_default_device() with the PCI GPU that matches boot
screen_info in pci_fixup_video().
[bhelgaas: remove unused "dev" in efifb_setup()]
Fixes: b4aa016305 ("efifb: Implement vga_default_device() (v2)")
Tested-by: Anibal Francisco Martinez Cortina <linuxkid.zeuz@gmail.com>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
CC: stable@vger.kernel.org # v3.5+
Pull crypto fixes from Herbert Xu:
"This push fixes an error in sha512_ssse3 that leads to incorrect
output as well as a memory leak in caam_jr when the module is
unloaded"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix memleak in caam_jr module
crypto: sha512_ssse3 - fix byte count to bit count conversion
The PE/COFF headers currently describe only the initialised-data
portions of the image, and result in no space being allocated for the
uninitialised-data portions. Consequently, the EFI boot stub will end
up overwriting unexpected areas of memory, with unpredictable results.
Fix by including a .bss section in the PE/COFF headers (functionally
equivalent to the init_size field in the bzImage header).
Signed-off-by: Michael Brown <mbrown@fensystems.co.uk>
Cc: Thomas Bächler <thomas@archlinux.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In two cases lapic.c does not use the apic_debug macro correctly. This patch
fixes them.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I've observed kvmclock being marked as unstable on a modern
single-socket system with a stable TSC and qemu-1.6.2 or qemu-2.0.0.
The culprit was failure in TSC matching because of overflow of
kvm_arch::nr_vcpus_matched_tsc in case there were multiple TSC writes
in a single synchronization cycle.
Turns out that qemu does multiple TSC writes during init, below is the
evidence of that (qemu-2.0.0):
The first one:
0xffffffffa08ff2b4 : vmx_write_tsc_offset+0xa4/0xb0 [kvm_intel]
0xffffffffa04c9c05 : kvm_write_tsc+0x1a5/0x360 [kvm]
0xffffffffa04cfd6b : kvm_arch_vcpu_postcreate+0x4b/0x80 [kvm]
0xffffffffa04b8188 : kvm_vm_ioctl+0x418/0x750 [kvm]
The second one:
0xffffffffa08ff2b4 : vmx_write_tsc_offset+0xa4/0xb0 [kvm_intel]
0xffffffffa04c9c05 : kvm_write_tsc+0x1a5/0x360 [kvm]
0xffffffffa090610d : vmx_set_msr+0x29d/0x350 [kvm_intel]
0xffffffffa04be83b : do_set_msr+0x3b/0x60 [kvm]
0xffffffffa04c10a8 : msr_io+0xc8/0x160 [kvm]
0xffffffffa04caeb6 : kvm_arch_vcpu_ioctl+0xc86/0x1060 [kvm]
0xffffffffa04b6797 : kvm_vcpu_ioctl+0xc7/0x5a0 [kvm]
#0 kvm_vcpu_ioctl at /build/buildd/qemu-2.0.0+dfsg/kvm-all.c:1780
#1 kvm_put_msrs at /build/buildd/qemu-2.0.0+dfsg/target-i386/kvm.c:1270
#2 kvm_arch_put_registers at /build/buildd/qemu-2.0.0+dfsg/target-i386/kvm.c:1909
#3 kvm_cpu_synchronize_post_init at /build/buildd/qemu-2.0.0+dfsg/kvm-all.c:1641
#4 cpu_synchronize_post_init at /build/buildd/qemu-2.0.0+dfsg/include/sysemu/kvm.h:330
#5 cpu_synchronize_all_post_init () at /build/buildd/qemu-2.0.0+dfsg/cpus.c:521
#6 main at /build/buildd/qemu-2.0.0+dfsg/vl.c:4390
The third one:
0xffffffffa08ff2b4 : vmx_write_tsc_offset+0xa4/0xb0 [kvm_intel]
0xffffffffa04c9c05 : kvm_write_tsc+0x1a5/0x360 [kvm]
0xffffffffa090610d : vmx_set_msr+0x29d/0x350 [kvm_intel]
0xffffffffa04be83b : do_set_msr+0x3b/0x60 [kvm]
0xffffffffa04c10a8 : msr_io+0xc8/0x160 [kvm]
0xffffffffa04caeb6 : kvm_arch_vcpu_ioctl+0xc86/0x1060 [kvm]
0xffffffffa04b6797 : kvm_vcpu_ioctl+0xc7/0x5a0 [kvm]
#0 kvm_vcpu_ioctl at /build/buildd/qemu-2.0.0+dfsg/kvm-all.c:1780
#1 kvm_put_msrs at /build/buildd/qemu-2.0.0+dfsg/target-i386/kvm.c:1270
#2 kvm_arch_put_registers at /build/buildd/qemu-2.0.0+dfsg/target-i386/kvm.c:1909
#3 kvm_cpu_synchronize_post_reset at /build/buildd/qemu-2.0.0+dfsg/kvm-all.c:1635
#4 cpu_synchronize_post_reset at /build/buildd/qemu-2.0.0+dfsg/include/sysemu/kvm.h:323
#5 cpu_synchronize_all_post_reset () at /build/buildd/qemu-2.0.0+dfsg/cpus.c:512
#6 main at /build/buildd/qemu-2.0.0+dfsg/vl.c:4482
The fix is to count each vCPU only once when matched, so that
nr_vcpus_matched_tsc holds the size of the matched set. This is
achieved by reusing generation counters. Every vCPU with
this_tsc_generation == cur_tsc_generation is in the matched set. The
match set is cleared by setting cur_tsc_generation to a value which no
other vCPU is set to (by incrementing it).
I needed to bump up the counter size form u8 to u64 to ensure it never
overflows. Otherwise in cases TSC is not written the same number of
times on each vCPU the counter could overflow and incorrectly indicate
some vCPUs as being in the matched set. This scenario seems unlikely
but I'm not sure if it can be disregarded.
Signed-off-by: Tomasz Grabiec <tgrabiec@cloudius-systems.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Obtaining the port number from DX is bogus as a) there are immediate
port accesses and b) user space may have changed the register content
while processing the PIO access. Forward the correct value from the
instruction emulator instead.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The access size of an in/ins is reported in dst_bytes, and that of
out/outs in src_bytes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
First, kvm_read_guest returns 0 on success. And then we need to take the
access size into account when testing the bitmap: intercept if any of
bits corresponding to the access is set.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CLTS only changes TS which is not monitored by selected CR0
interception. So skip any attempt to translate WRITE_CR0 to
CR0_SEL_WRITE for this instruction.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With commit b6b8a1451f that introduced
vmx_check_nested_events, checks for injectable interrupts happen
at different points in time for L1 and L2 that could potentially
cause a race. The regression occurs because KVM_REQ_EVENT is always
set when nested_run_pending is set even if there's no pending interrupt.
Consequently, there could be a small window when check_nested_events
returns without exiting to L1, but an interrupt comes through soon
after and it incorrectly, gets injected to L2 by inject_pending_event
Fix this by adding a call to check for nested events too when a check
for injectable interrupt returns true
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to move from the #include "../../../xxxxx.c" anti-pattern used
by both the x86 and arm64 versions of the stub to a static library
linked into either the kernel proper (arm64) or a separate boot
executable (x86), there is some prepatory work required.
This patch does the following:
- move forward declarations of functions shared between the arch
specific and the generic parts of the stub to include/linux/efi.h
- move forward declarations of functions shared between various .c files
of the generic stub code to a new local header file called "efistub.h"
- add #includes to all .c files which were formerly relying on the
#includor to include the correct header files
- remove all static modifiers from functions which will need to be
externally visible once we move to a static library
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This moves definitions depended upon both by code under arch/x86/boot
and under drivers/firmware/efi to <asm/efi.h>. This is in preparation of
turning the stub code under drivers/firmware/efi into a static library.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In order for other archs (such as arm64) to be able to reuse the virtual
mode function call wrappers, move them to drivers/firmware/efi/runtime-wrappers.c.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Flipping the LSB doesn't require four lines of code. This shaves a few
bytes of the generated code, including a branch.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1403183731-15402-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'sysret' fastpath does not correctly restore even all regular
registers, much less any segment registers or reflags values. That is
very much part of why it's faster than 'iret'.
Normally that isn't a problem, because the normal ptrace() interface
catches the process using the signal handler infrastructure, which
always returns with an iret.
However, some paths can get caught using ptrace_event() instead of the
signal path, and for those we need to make sure that we aren't going to
return to user space using 'sysret'. Otherwise the modifications that
may have been done to the register set by the tracer wouldn't
necessarily take effect.
Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from
arch_ptrace_stop_needed() which is invoked from ptrace_stop().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, any NMI is falsely handled by a NMI handler of NMI watchdog
if CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR is set.
For example, we use external NMI to make system panic to get crash
dump, but in this case, the external NMI is falsely handled do to the
issue.
This commit deals with the issue simply by ignoring CondChgd bit.
Here is explanation in detail.
On x86 NMI watchdog uses performance monitoring feature to
periodically signal NMI each time performance counter gets overflowed.
intel_pmu_handle_irq() is called as a NMI_LOCAL handler from a NMI
handler of NMI watchdog, perf_event_nmi_handler(). It identifies an
owner of a given NMI by looking at overflow status bits in
MSR_CORE_PERF_GLOBAL_STATUS MSR. If some of the bits are set, then it
handles the given NMI as its own NMI.
The problem is that the intel_pmu_handle_irq() doesn't distinguish
CondChgd bit from other bits. Unlike the other status bits, CondChgd
bit doesn't represent overflow status for performance counters. Thus,
CondChgd bit cannot be thought of as a mark indicating a given NMI is
NMI watchdog's.
As a result, if CondChgd bit is set, any NMI is falsely handled by the
NMI handler of NMI watchdog. Also, if type of the falsely handled NMI
is either NMI_UNKNOWN, NMI_SERR or NMI_IO_CHECK, the corresponding
action is never performed until CondChgd bit is cleared.
I noticed this behavior on systems with Ivy Bridge processors: Intel
Xeon CPU E5-2630 v2 and Intel Xeon CPU E7-8890 v2. On both systems,
CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR has already been set
in the beginning at boot. Then the CondChgd bit is immediately cleared
by next wrmsr to MSR_CORE_PERF_GLOBAL_CTRL MSR and appears to remain
0.
On the other hand, on older processors such as Nehalem, Xeon E7540,
CondChgd bit is not set in the beginning at boot.
I'm not sure about exact behavior of CondChgd bit, in particular when
this bit is set. Although I read Intel System Programmer's Manual to
figure out that, the descriptions I found are:
In 18.9.1:
"The MSR_PERF_GLOBAL_STATUS MSR also provides a ¡sticky bit¢ to
indicate changes to the state of performancmonitoring hardware"
In Table 35-2 IA-32 Architectural MSRs
63 CondChg: status bits of this register has changed.
These are different from the bahviour I see on the actual system as I
explained above.
At least, I think ignoring CondChgd bit should be enough for NMI
watchdog perspective.
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20140625.103503.409316067.d.hatayama@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mauro reported that his AMD X2 using the powernow-k8 cpufreq driver
locked up when doing cpu hotplug.
Because we called set_cyc2ns_scale() from the time_cpufreq_notifier()
unconditionally, it gets called multiple times for each freq change,
instead of only the once, when the tsc_khz value actually changes.
Because it gets called more than once, we run out of cyc2ns data slots
and stall, waiting for a free one, but because we're half way offline,
there's no consumers to free slots.
By placing the call inside the condition that actually changes tsc_khz
we avoid superfluous calls and avoid the problem.
Reported-by: Mauro <registosites@hotmail.com>
Tested-by: Mauro <registosites@hotmail.com>
Fixes: 20d1c86a57 ("sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs")
Cc: <stable@vger.kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Bin Gao <bin.gao@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The two more serious bugs ("KVM: SVM: Fix CPL export via SS.DPL" and
"KVM: s390: add sie.h uapi header file to Kbuild and remove header
dependency") were introduced in the 3.16 merge window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Rjb4
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A bunch of one-liners (except the s390 one).
The two more serious bugs ("KVM: SVM: Fix CPL export via SS.DPL" and
"KVM: s390: add sie.h uapi header file to Kbuild and remove header
dependency") were introduced in the 3.16 merge window"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix CPL export via SS.DPL
KVM: s390: add sie.h uapi header file to Kbuild and remove header dependency
MIPS: KVM: Fix memory leak on VCPU
KVM: x86: preserve the high 32-bits of the PAT register
kvm: fix wrong address when writing Hyper-V tsc page
KVM: x86: Increase the number of fixed MTRR regs to 10
There's several locations in the kernel that open code the calculation
of the next location in the trace_seq buffer. This is usually done with
p->buffer + p->len
Instead of having this open coded, supply a helper function in the
header to do it for them. This function is called trace_seq_buffer_ptr().
Link: http://lkml.kernel.org/p/20140626220129.452783019@goodmis.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Function graph tracing is a bit different than the function tracers, as
it is processed after either the ftrace_caller or ftrace_regs_caller
and we only have one place to modify the jump to ftrace_graph_caller,
the jump needs to happen after the restore of registeres.
The function graph tracer is dependent on the function tracer, where
even if the function graph tracing is going on by itself, the save and
restore of registers is still done for function tracing regardless of
if function tracing is happening, before it calls the function graph
code.
If there's no function tracing happening, it is possible to just call
the function graph tracer directly, and avoid the wasted effort to save
and restore regs for function tracing.
This requires adding new flags to the dyn_ftrace records:
FTRACE_FL_TRAMP
FTRACE_FL_TRAMP_EN
The first is set if the count for the record is one, and the ftrace_ops
associated to that record has its own trampoline. That way the mcount code
can call that trampoline directly.
In the future, trampolines can be added to arbitrary ftrace_ops, where you
can have two or more ftrace_ops registered to ftrace (like kprobes and perf)
and if they are not tracing the same functions, then instead of doing a
loop to check all registered ftrace_ops against their hashes, just call the
ftrace_ops trampoline directly, which would call the registered ftrace_ops
function directly.
Without this patch perf showed:
0.05% hackbench [kernel.kallsyms] [k] ftrace_caller
0.05% hackbench [kernel.kallsyms] [k] arch_local_irq_save
0.05% hackbench [kernel.kallsyms] [k] native_sched_clock
0.04% hackbench [kernel.kallsyms] [k] __buffer_unlock_commit
0.04% hackbench [kernel.kallsyms] [k] preempt_trace
0.04% hackbench [kernel.kallsyms] [k] prepare_ftrace_return
0.04% hackbench [kernel.kallsyms] [k] __this_cpu_preempt_check
0.04% hackbench [kernel.kallsyms] [k] ftrace_graph_caller
See that the ftrace_caller took up more time than the ftrace_graph_caller
did.
With this patch:
0.05% hackbench [kernel.kallsyms] [k] __buffer_unlock_commit
0.04% hackbench [kernel.kallsyms] [k] call_filter_check_discard
0.04% hackbench [kernel.kallsyms] [k] ftrace_graph_caller
0.04% hackbench [kernel.kallsyms] [k] sched_clock
The ftrace_caller is no where to be found and ftrace_graph_caller still
takes up the same percentage.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A struct member variable is set to the same value more than once
This was found using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We import the CPL via SS.DPL since ae9fedc793. However, we fail to
export it this way so far. This caused spurious guest crashes, e.g. of
Linux when accessing the vmport from guest user space which triggered
register saving/restoring to/from host user space.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull x86 fixes from Peter Anvin:
"A pile of fixes related to the VDSO, EFI and 32-bit badsys handling.
It turns out that removing the section headers from the VDSO breaks
gdb, so this puts back most of them. A very simple typo broke
rt_sigreturn on some versions of glibc, with obviously disastrous
results. The rest is pretty much fixes for the corresponding fallout.
The EFI fixes fixes an arithmetic overflow on 32-bit systems and
quiets some build warnings.
Finally, when invoking an invalid system call number on x86-32, we
bypass a bunch of handling, which can make the audit code oops"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi-pstore: Fix an overflow on 32-bit builds
x86/vdso: Error out in vdso2c if DT_RELA is present
x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile
x86_32, signal: Fix vdso rt_sigreturn
x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)
x86/vdso: Create .build-id links for unstripped vdso files
x86/vdso: Remove some redundant in-memory section headers
x86/vdso: Improve the fake section headers
x86/vdso2c: Use better macros for ELF bitness
x86/vdso: Discard the __bug_table section
efi: Fix compiler warnings (unused, const, type)
Byte-to-bit-count computation is only partly converted to big-endian and is
mixing in CPU-endian values. Problem was noticed by sparce with warning:
CHECK arch/x86/crypto/sha512_ssse3_glue.c
arch/x86/crypto/sha512_ssse3_glue.c:144:19: warning: restricted __be64 degrades to integer
arch/x86/crypto/sha512_ssse3_glue.c:144:17: warning: incorrect type in assignment (different base types)
arch/x86/crypto/sha512_ssse3_glue.c:144:17: expected restricted __be64 <noident>
arch/x86/crypto/sha512_ssse3_glue.c:144:17: got unsigned long long
Cc: <stable@vger.kernel.org>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
vdso2c was checking for various types of relocations to detect when
the vdso had undefined symbols or was otherwise dependent on
relocation at load time. Undefined symbols in the vdso would fail if
accessed at runtime, and certain implementation errors (e.g. branch
profiling or incorrect symbol visibilities) could result in data
access through the GOT that requires relocations. This could be
as simple as:
extern char foo;
return foo;
Without some kind of visibility control, the compiler would assume
that foo could be interposed at load time and would generate a
relocation.
x86-64 and x32 (as opposed to i386) use explicit-addent (RELA) instead
of implicit-addent (REL) relocations for data access, and vdso2c
forgot to detect those.
Whether these bad relocations would actually fail at runtime depends
on what the linker sticks in the unrelocated references. Nonetheless,
these relocations have no business existing in the vDSO and should be
fixed rather than silently ignored.
This error could trigger on some configurations due to branch
profiling. The previous patch fixed that.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/74ef0c00b4d2a3b573e00a4113874e62f772e348.1403642755.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
DISABLE_BRANCH_PROFILING turns off branch profiling (i.e. a
redefinition of 'if'). Branch profiling depends on a bunch of
kernel-internal symbols and generates extra output sections, none of
which are useful or functional in the vDSO.
It's currently turned off for vclock_gettime.c, but vgetcpu.c also
triggers branch profiling, so just turn it off in the makefile.
This fixes the build on some configurations: the vdso could contain
undefined symbols, and the fake section table overflowed due to
ftrace's added sections.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/bf1ec29e03b2bbc081f6dcaefa64db1c3a83fb21.1403642755.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
BorisO reports that misc_register() fails often on xen. The current code
unregisters the CPU hotplug notifier in that case. If then a CPU is
offlined and onlined back again, we end up with a second timer running
on that CPU, leading to soft lockups and system hangs.
So let's leave the hotcpu notifier always registered - even if
mce_device_create failed for some cores and never unreg it so that we
can deal with the timer handling accordingly.
Reported-and-Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1403274493-1371-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Sometimes it is preferred not to use the trigger_all_cpu_backtrace()
routine when one wants to avoid capturing a back trace for current. For
instance if one was previously captured recently.
This patch provides a new routine namely
trigger_allbutself_cpu_backtrace() which offers the flexibility to issue
an NMI to every cpu but current and capture a back trace accordingly.
Patch x86 and sparc to support new routine.
[dzickus@redhat.com: add stub in #else clause]
[dzickus@redhat.com: don't print message in single processor case, wrap with get/put_cpu based on Oleg's suggestion]
[sfr@canb.auug.org.au: undo C99ism]
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit:
commit 6f121e548f
Author: Andy Lutomirski <luto@amacapital.net>
Date: Mon May 5 12:19:34 2014 -0700
x86, vdso: Reimplement vdso.so preparation in build-time C
Contained this obvious typo:
- restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
+ restorer = current->mm->context.vdso +
+ selected_vdso32->sym___kernel_sigreturn;
Note the missing 'rt_' in the new code. Fix it.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/1eb40ad923acde2e18357ef2832867432e70ac42.1403361010.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The bad syscall nr paths are their own incomprehensible route
through the entry control flow. Rearrange them to work just like
syscalls that return -ENOSYS.
This fixes an OOPS in the audit code when fast-path auditing is
enabled and sysenter gets a bad syscall nr (CVE-2014-4508).
This has probably been broken since Linux 2.6.27:
af0575bba0 i386 syscall audit fast-path
Cc: stable@vger.kernel.org
Cc: Roland McGrath <roland@redhat.com>
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/e09c499eade6fc321266dd6b54da7beb28d6991c.1403558229.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Merrifield DSP used various pipelines to identify the streams and processing
modules. Add these defination in the pcm driver and also add a table for device
entries to firmware pipeline id conversion
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Now we have completely switched to irqdomain, so clean up transition code
in IOAPIC drivers.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1402302011-23642-43-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Release IOAPIC pin associated with PCI device when the PCI device
is disabled.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Tony Lindgren <tony@atomide.com>
Link: http://lkml.kernel.org/r/1402302011-23642-42-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Release IOAPIC pin associated with PCI device when the PCI device
is disabled.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1402302011-23642-41-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Release IOAPIC pin associated with PCI device when the PCI device
is disabled.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1402302011-23642-40-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin