We used to read several bytes of the shadow memory in advance.
Therefore additional shadow memory mapped to prevent crash if
speculative load would happen near the end of the mapped shadow memory.
Now we don't have such speculative loads, so we no longer need to map
additional shadow memory.
Link: http://lkml.kernel.org/r/20170601162338.23540-3-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Booting a v4.11-rc1 kernel with DEBUG_VIRTUAL and KASAN enabled produces
the following splat (trimmed for brevity):
[ 0.000000] virt_to_phys used for non-linear address: ffff200008080000 (0xffff200008080000)
[ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:14 __virt_to_phys+0x48/0x70
[ 0.000000] PC is at __virt_to_phys+0x48/0x70
[ 0.000000] LR is at __virt_to_phys+0x48/0x70
[ 0.000000] Call trace:
[ 0.000000] [<ffff2000080b1ac0>] __virt_to_phys+0x48/0x70
[ 0.000000] [<ffff20000a03b86c>] kasan_init+0x1c0/0x498
[ 0.000000] [<ffff20000a034018>] setup_arch+0x2fc/0x948
[ 0.000000] [<ffff20000a030c68>] start_kernel+0xb8/0x570
[ 0.000000] [<ffff20000a0301e8>] __primary_switched+0x6c/0x74
This is because we use virt_to_pfn() on a kernel image address when
trying to figure out its nid, so that we can allocate its shadow from
the same node.
As with other recent changes, this patch uses lm_alias() to solve this.
We could instead use NUMA_NO_NODE, as x86 does for all shadow
allocations, though we'll likely want the "real" memory shadow to be
backed from its corresponding nid anyway, so we may as well be
consistent and find the nid for the image shadow.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
__pa_symbol is technically the marcro that should be used for kernel
symbols. Switch to this as a pre-requisite for DEBUG_VIRTUAL which
will do bounds checking.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the 16KB or 64KB page configurations, the generic
vmemmap_populate() implementation warns on potential offnode
page_structs via vmemmap_verify() because the arm64 kasan_init() passes
NUMA_NO_NODE instead of the actual node for the kernel image memory.
Fixes: f9040773b7 ("arm64: move kernel image to base of vmalloc area")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: James Morse <james.morse@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
This adds support for KASLR is implemented, based on entropy provided by
the bootloader in the /chosen/kaslr-seed DT property. Depending on the size
of the address space (VA_BITS) and the page size, the entropy in the
virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all
4 levels), with the sidenote that displacements that result in the kernel
image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB
granule kernels, respectively) are not allowed, and will be rounded up to
an acceptable value.
If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is
randomized independently from the core kernel. This makes it less likely
that the location of core kernel data structures can be determined by an
adversary, but causes all function calls from modules into the core kernel
to be resolved via entries in the module PLTs.
If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is
randomized by choosing a page aligned 128 MB region inside the interval
[_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of
entropy (depending on page size), independently of the kernel randomization,
but still guarantees that modules are within the range of relative branch
and jump instructions (with the caveat that, since the module region is
shared with other uses of the vmalloc area, modules may need to be loaded
further away if the module region is exhausted)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This moves the module area to right before the vmalloc area, and moves
the kernel image to the base of the vmalloc area. This is an intermediate
step towards implementing KASLR, which allows the kernel image to be
located anywhere in the vmalloc area.
Since other subsystems such as hibernate may still need to refer to the
kernel text or data segments via their linears addresses, both are mapped
in the linear region as well. The linear alias of the text region is
mapped read-only/non-executable to prevent inadvertent modification or
execution.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
At boot we may change the granularity of the tables mapping the kernel
(by splitting or making sections). This may happen when we create the
linear mapping (in __map_memblock), or at any point we try to apply
fine-grained permissions to the kernel (e.g. fixup_executable,
mark_rodata_ro, fixup_init).
Changing the active page tables in this manner may result in multiple
entries for the same address being allocated into TLBs, risking problems
such as TLB conflict aborts or issues derived from the amalgamation of
TLB entries. Generally, a break-before-make (BBM) approach is necessary
to avoid conflicts, but we cannot do this for the kernel tables as it
risks unmapping text or data being used to do so.
Instead, we can create a new set of tables from scratch in the safety of
the existing mappings, and subsequently migrate over to these using the
new cpu_replace_ttbr1 helper, which avoids the two sets of tables being
active simultaneously.
To avoid issues when we later modify permissions of the page tables
(e.g. in fixup_init), we must create the page tables at a granularity
such that later modification does not result in splitting of tables.
This patch applies this strategy, creating a new set of fine-grained
page tables from scratch, and safely migrating to them. The existing
fixmap and kasan shadow page tables are reused in the new fine-grained
tables.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The page table modification performed during the KASAN init risks the
allocation of conflicting TLB entries, as it swaps a set of valid global
entries for another without suitable TLB maintenance.
The presence of conflicting TLB entries can result in the delivery of
synchronous TLB conflict aborts, or may result in the use of erroneous
data being returned in response to a TLB lookup. This can affect
explicit data accesses from software as well as translations performed
asynchronously (e.g. as part of page table walks or speculative I-cache
fetches), and can therefore result in a wide variety of problems.
To avoid this, use cpu_replace_ttbr1 to swap the page tables. This
ensures that when the new tables are installed there are no stale
entries from the old tables which may conflict. As all updates are made
to the tables while they are not active, the updates themselves are
safe.
At the same time, add the missing barrier to ensure that the tmp_pg_dir
entries updated via memcpy are visible to the page table walkers at the
point the tmp_pg_dir is installed. All other page table updates made as
part of KASAN initialisation have the requisite barriers due to the use
of the standard page table accessors.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When switching from the early KASAN shadow region, which maps the
entire shadow space read-write, to the permanent KASAN shadow region,
which uses a zero page to shadow regions that are not subject to
instrumentation, the lowest level table kasan_zero_pte[] may be
reused unmodified, which means that the mappings of the zero page
that it contains will still be read-write.
So update it explicitly to map the zero page read only when we
activate the permanent mapping.
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Sparse reports some new issues introduced by the kasan patches:
arch/arm64/mm/kasan_init.c:91:13: warning: no previous prototype for
'kasan_early_init' [-Wmissing-prototypes] void __init kasan_early_init(void)
^
arch/arm64/mm/kasan_init.c:91:13: warning: symbol 'kasan_early_init'
was not declared. Should it be static? [sparse]
This patch resolves the problem by adding a prototype for
kasan_early_init and marking the function as asmlinkage, since it's only
called from head.S.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds arch specific code for kernel address sanitizer
(see Documentation/kasan.txt).
1/8 of kernel addresses reserved for shadow memory. There was no
big enough hole for this, so virtual addresses for shadow were
stolen from vmalloc area.
At early boot stage the whole shadow region populated with just
one physical page (kasan_zero_page). Later, this page reused
as readonly zero shadow for some memory that KASan currently
don't track (vmalloc).
After mapping the physical memory, pages for shadow memory are
allocated and mapped.
Functions like memset/memmove/memcpy do a lot of memory accesses.
If bad pointer passed to one of these function it is important
to catch this. Compiler's instrumentation cannot do this since
these functions are written in assembly.
KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions
in mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in name, so we could call non-instrumented variant
if needed.
Some files built without kasan instrumentation (e.g. mm/slub.c).
Original mem* function replaced (via #define) with prefixed variants
to disable memory access checks for such files.
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Andrey Ryabinin