Remove the split of symbol tables for data (MAP__VARIABLE) and for
functions (MAP__FUNCTION), its unneeded and there were various places
doing two lookups to find a symbol, so simplify this.
We still will consider only the symbols that matched the filters in
place, i.e. see the (elf_(sec,sym)|symbol_type)__filter() routines in
the patch, just so that we consider only the same symbols as before,
to reduce the possibility of regressions.
All the tests on 50-something build environments, in varios versions
of lots of distros and cross build environments were performed without
build regressions, as usual with all pull requests the other tests were
also performed: 'perf test' and 'make -C tools/perf build-test'.
Also this was done at a great granularity so that regressions can be
bisected more easily.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiq0fy2rsleupnqqwuojo1ne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To replace longer code sequences in various places.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-tlk3klbkfyjrbfjvryyznfju@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On one hand this ensures that the memory is properly freed when the DSO
gets freed. On the other hand this significantly speeds up the
processing of the callchain nodes when lots of srclines are requested.
For one of my data files e.g.:
Before:
Performance counter stats for 'perf report -s srcline -g srcline --stdio':
52496.495043 task-clock (msec) # 0.999 CPUs utilized
634 context-switches # 0.012 K/sec
2 cpu-migrations # 0.000 K/sec
191,561 page-faults # 0.004 M/sec
165,074,498,235 cycles # 3.144 GHz
334,170,832,408 instructions # 2.02 insn per cycle
90,220,029,745 branches # 1718.591 M/sec
654,525,177 branch-misses # 0.73% of all branches
52.533273822 seconds time elapsedProcessed 236605 events and lost 40 chunks!
After:
Performance counter stats for 'perf report -s srcline -g srcline --stdio':
22606.323706 task-clock (msec) # 1.000 CPUs utilized
31 context-switches # 0.001 K/sec
0 cpu-migrations # 0.000 K/sec
185,471 page-faults # 0.008 M/sec
71,188,113,681 cycles # 3.149 GHz
133,204,943,083 instructions # 1.87 insn per cycle
34,886,384,979 branches # 1543.214 M/sec
278,214,495 branch-misses # 0.80% of all branches
22.609857253 seconds time elapsed
Note that the difference is only this large when `--inline` is not
passed. In such situations, we would use the inliner cache and thus do
not run this code path that often.
I think that this cache should actually be used in other places, too.
When looking at the valgrind leak report for perf report, we see tons of
srclines being leaked, most notably from calls to
hist_entry__get_srcline. The problem is that get_srcline has many
different formatting options (show_sym, show_addr, potentially even
unwind_inlines when calling __get_srcline directly). As such, the
srcline cannot easily be cached for all calls, or we'd have to add
caches for all formatting combinations (6 so far). An alternative would
be to remove the formatting options and handle that on a different level
- i.e. print the sym/addr on demand wherever we actually output
something. And the unwind_inlines could be moved into a separate
function that does not return the srcline.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-4-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The inline_node structs are maintained by the new dso->inlines tree.
This in turn keeps ownership of the fake symbols and srcline string
representing an inline frame.
This tree is sorted by address to allow quick lookups. All other entries
of the symbol beside the function name are unused for inline frames. The
advantage of this approach is that all existing users of the callchain
API can now transparently display inlined frames without having to patch
their code.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20171009203310.17362-6-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi reported a performance drop in single threaded perf tools such as
'perf script' due to the growing number of locks being put in place to
allow for multithreaded tools, so wrap the POSIX threads rwlock routines
with the names used for such kinds of locks in the Linux kernel and then
allow for tools to ask for those locks to be used or not.
I.e. a tool may have a multithreaded phase and then switch to single
threaded, like the upcoming patches for the synthesizing of
PERF_RECORD_{FORK,MMAP,etc} for pre-existing processes to then switch to
single threaded mode in 'perf top'.
The init routines will not be conditional, this way starting as single
threaded to then move to multi threaded mode should be possible.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170404161739.GH12903@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a stripped binary is placed in the cache, the user is in a situation
where there's a cached elf file present, but it doesn't have any symtab
to use for name resolution. Grab the debuginfo for binaries that don't
end in .ko. This yields a better chance of resolving symbols from older
traces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-7-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach perf how to resolve symbols from binaries that are in a different
mount namespace from the tool. This allows perf to generate meaningful
stack traces even if the binary resides in a different mount namespace
from the tool.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-2-git-send-email-kjlx@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move decompress_kmodule() to util/dso.c and split it into two functions
returning fd and (decompressed) file path. The existing user only wants
the fd version but the path version will be used soon.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like machine__findnew_module_dso(), it should set necessary info for
kernel modules to find symbol info from the file. Factor out
dso__set_module_info() to do it.
This is needed for dso__needs_decompress() to detect such DSOs.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-5-git-send-email-elena.reshetova@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They were in tools/include/linux/kernel.h, requiring that it in turn
included stdio.h, which is way too heavy.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-855h8olnkot9v0dajuee1lo3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I hit a bug when running test suite without forking
each test (-F option):
$ perf test -F dso
8: Test dso data read : Ok
9: Test dso data cache : FAILED!
10: Test dso data reopen : FAILED!
The reason the session file limit is set just once for
perf process so we need to reset it for each test,
otherwise wrong limit is taken into account.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use path/to/bin/buildid/elf instead of path/to/bin/buildid
to store corresponding elf binary.
This also stores vdso in buildid/vdso, kallsyms in buildid/kallsyms.
Note that the existing caches are not updated until user adds
or updates the cache. Anyway, if there is the old style build-id
cache it falls back to use it. (IOW, it is backward compatible)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151537.16098.85815.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All over the tree.
Cc: David Ahern <dsahern@gmail.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-8nzhnokxyp8y4v7gf0j00oyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Store DSO's .text offset into DSO, used for VDSOs and will also be used for
other needs, like handling kernel modules.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456479154-136027-2-git-send-email-wangnan0@huawei.com
[ Extracted from larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 4598a0a6d2 ("perf symbols: Improve DSO long names lookup speed
with rbtree") Added a tree to lookup dsos by long name. That tree gets
corrupted whenever a dso long name is changed because the tree is not
updated.
One effect of that is buildid-list does not work with the 'with-hits'
option because dso lookup fails and results in two structs for the same
dso. The first has the buildid but no hits, the second has hits but no
buildid. e.g.
Before:
$ tools/perf/perf record ls
arch certs CREDITS Documentation firmware include
ipc Kconfig lib Makefile net REPORTING-BUGS
scripts sound usr block COPYING crypto
drivers fs init Kbuild kernel MAINTAINERS
mm README samples security tools virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data (11 samples) ]
$ tools/perf/perf buildid-list
574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms]
30c94dc66a1fe95180c3d68d2b89e576d5ae213c /lib/x86_64-linux-gnu/libc-2.19.so
$ tools/perf/perf buildid-list -H
574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms]
0000000000000000000000000000000000000000 /lib/x86_64-linux-gnu/libc-2.19.so
After:
$ tools/perf/perf buildid-list -H
574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms]
30c94dc66a1fe95180c3d68d2b89e576d5ae213c /lib/x86_64-linux-gnu/libc-2.19.so
The fix is to record the root of the tree on the dso so that
dso__set_long_name() can update the tree when the long name changes.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Fixes: 4598a0a6d2 ("perf symbols: Improve DSO long names lookup speed with rbtree")
Link: http://lkml.kernel.org/r/1447408112-1920-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'annotate' tool does some filtering in the entries in a DSO but
forgot to reset the cache done in dso__find_symbol(), cauxing a SEGV:
[root@zoo ~]# perf annotate netlink_poll
perf: Segmentation fault
-------- backtrace --------
perf[0x526ceb]
/lib64/libc.so.6(+0x34960)[0x7faedfbe0960]
perf(rb_erase+0x223)[0x499d63]
perf[0x4213e9]
perf[0x4bc123]
perf[0x4bc621]
perf[0x4bf26b]
perf[0x4bc855]
perf(perf_session__process_events+0x340)[0x4bddc0]
perf(cmd_annotate+0x6bb)[0x421b5b]
perf[0x479063]
perf(main+0x60a)[0x42098a]
/lib64/libc.so.6(__libc_start_main+0xf0)[0x7faedfbcbfe0]
perf[0x420aa9]
[0x0]
[root@zoo ~]#
Fix it by reseting the find cache when removing symbols.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes: b685ac22b4 ("perf symbols: Add front end cache for DSO symbol lookup")
Link: http://lkml.kernel.org/n/tip-b2y9x46y0t8yem1ive41zqyp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This has a different model than the 'thread' and 'map' struct lifetimes:
there is not a definitive "don't use this DSO anymore" event, i.e. we may
get many 'struct map' holding references to the '/usr/lib64/libc-2.20.so'
DSO but then at some point some DSO may have no references but we still
don't want to straight away release its resources, because "soon" we may
get a new 'struct map' that needs it and we want to reuse its symtab or
other resources.
So we need some way to garbage collect it when crossing some memory
usage threshold, which is left for anoter patch, for now it is
sufficient to release it when calling dsos__exit(), i.e. when deleting
the whole list as part of deleting the 'struct machine' containing it,
which will leave only referenced objects being used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-majzgz07cm90t2tejrjy4clf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow concurrent access, next step: refcount struct dso instances, so
that we can ditch unused them when the last map pointing to it goes
away.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-yk1k08etpd2aoe3tnrf0oizn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before patch ba92732e98 ('perf kmaps: Check kmaps to make code more
robust'), 'perf report' and 'perf annotate' will segfault if trace data
contains kernel module information like this:
# perf report -D -i ./perf.data
...
0 0 0x188 [0x50]: PERF_RECORD_MMAP -1/0: [0xffffffbff1018000(0xf068000) @ 0]: x [test_module]
...
# perf report -i ./perf.data --objdump=/path/to/objdump --kallsyms=/path/to/kallsyms
perf: Segmentation fault
-------- backtrace --------
/path/to/perf[0x503478]
/lib64/libc.so.6(+0x3545f)[0x7fb201f3745f]
/path/to/perf[0x499b56]
/path/to/perf(dso__load_kallsyms+0x13c)[0x49b56c]
/path/to/perf(dso__load+0x72e)[0x49c21e]
/path/to/perf(map__load+0x6e)[0x4ae9ee]
/path/to/perf(thread__find_addr_map+0x24c)[0x47deec]
/path/to/perf(perf_event__preprocess_sample+0x88)[0x47e238]
/path/to/perf[0x43ad02]
/path/to/perf[0x4b55bc]
/path/to/perf(ordered_events__flush+0xca)[0x4b57ea]
/path/to/perf[0x4b1a01]
/path/to/perf(perf_session__process_events+0x3be)[0x4b428e]
/path/to/perf(cmd_report+0xf11)[0x43bfc1]
/path/to/perf[0x474702]
/path/to/perf(main+0x5f5)[0x42de95]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7fb201f23bd4]
/path/to/perf[0x42dfc4]
This is because __kmod_path__parse treats '[' leading names as kernel
name instead of names of kernel module.
If perf.data contains build information and the buildid of such modules
can be found, the dso->kernel of it will be set to DSO_TYPE_KERNEL by
__event_process_build_id(), not kernel module.
It will then be passed to dso__load() -> dso__load_kernel_sym() ->
dso__load_kcore() if --kallsyms is provided.
The refered patch adds NULL pointer checker to avoid segfault. However,
such kernel modules are still processed incorrectly.
This patch fixes __kmod_path__parse, makes it treat names like
'[test_module]' as kernel modules.
kmod-path.c is also update to reflect the above changes.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1433321541-170245-1-git-send-email-wangnan0@huawei.com
[ Fixed the merged with 0443f36b0d ("perf machine: Fix the search
for the kernel DSO on the unified list" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It never was a 'struct dso' method, so fix that by rename
dso__kernel_findnew() to machine__findnew_kernel().
At some point I'll move it all to the machine.[ch] files, for now
lets ease patch review by not moving too much stuff.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zrxmblgsg5vx0iv4rhvq2f6l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using dso__data_fd() in multi-thread environment is not safe since
returned fd can be closed and/or reused anytime.
So convert it to the dso__data_get/put_fd() pair to protect the access
with lock.
The original dso__data_fd() is deprecated and kept only for testing.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432137821-10853-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a member to struct dso that can be used by Instruction Trace
implementations to hold a cache for decoded instructions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before, when some problem happened while trying to load the kernel
symtab, 'perf top' would show:
┌─Warning:───────────────────────────┐
│The vmlinux file can't be used. │
│Kernel samples will not be resolved.│
│ │
│ │
│Press any key... │
└────────────────────────────────────┘
Now, it reports:
# perf top --vmlinux /dev/null
┌─Warning:───────────────────────────────────────────┐
│The /tmp/passwd file can't be used: Invalid ELF file│
│Kernel samples will not be resolved. │
│ │
│ │
│Press any key... │
└────────────────────────────────────────────────────┘
This is possible because we now register the reason for not being able
to load the symtab in the dso->load_errno member, and provide a
dso__strerror_load() routine to format this error into a strerror like
string with a short reason for the error while loading.
That can be just forwarding the dso__strerror_load() call to
strerror_r(), or, for a separate errno range providing a custom message.
Reported-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u5rb5uq63xqhkfb8uv2lxd5u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We no longer need the 'compressed' argument, because all
current users use 'NULL' for it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d72q2s7ggbmy2yzhumux4zzw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate the creation of new dso object and its addition to the dsos
list. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8j43jod97fdt5dwdsushwwae@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provides united way of parsing kernel module path
into several components.
The new kmod_path__parse function and few defines:
int __kmod_path__parse(struct kmod_path *m, const char *path,
bool alloc_name, bool alloc_ext);
#define kmod_path__parse(__m, __p) __kmod_path__parse(__m, __p, false, false)
#define kmod_path__parse_name(__m, __p) __kmod_path__parse(__m, __p, true , false)
#define kmod_path__parse_ext(__m, __p) __kmod_path__parse(__m, __p, false, true)
parse kernel module @path and updates @m argument like:
@comp - true if @path contains supported compression suffix,
false otherwise
@kmod - true if @path contains '.ko' suffix in right position,
false otherwise
@name - if (@alloc_name && @kmod) is true, it contains strdup-ed base name
of the kernel module without suffixes, otherwise strudup-ed
base name of @path
@ext - if (@alloc_ext && @comp) is true, it contains strdup-ed string
the compression suffix
It returns 0 if there's no strdup error, -ENOMEM otherwise.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9t6eqg8j610r94l743hkntiv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f1f13af99a ("perf callchain: Cache eh/debug frame offset for
dwarf unwind") introduces a cache for .debug_frame and .eh_frame_hdr.
Unfortunately, it makes them share a same cache (dso->frame_offset).
Which causes unwind failure on ARM:
$ perf test unwind
Test dwarf unwind: FAILED!
The reason is that, if a dso has '.debug_frame' but doesn't have
'.eh_frame_hdr' (like ARM), dso->frame_offset will be filled by offset
of '.debug_frame' during the first time calling of find_proc_info() ->
read_unwind_spec_debug_frame(), and be regarded to '.eh_frame_hdr' when
the second time calling of find_proc_info() ->
read_unwind_spec_eh_frame(), since '.eh_frame_hdr' is checked prior to
'.debug_frame'.
This patch solves the problem by creating two cache fields for
'.eh_frame_hdr' and '.debug_frame'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/55028BA0.1030701@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libunwind tries to resolve callchains it needs to know the offset
of .eh_frame_hdr or .debug_frame to access the dso.
Since it will always return the same result for a given DSO, just cache
the result as an optimization.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1422518843-25818-41-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds basic support to handle compressed kernel module as some
distro (such as Archlinux) carries on it now. The actual work using
compression library will be added later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1415063674-17206-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces an abstraction for exporting sample data in a
database-friendly way. The abstraction does not implement the actual
output. A subsequent patch takes this facility into use for extending
the script interface.
The abstraction is needed because static data like symbols, dsos, comms
etc need to be exported only once. That means allocating them a unique
identifier and recording it on each structure. The member 'db_id' is
used for that. 'db_id' is just a 64-bit sequence number.
Exporting centres around the db_export__sample() function which exports
the associated data structures if they have not yet been allocated a
db_id.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414061124-26830-6-git-send-email-adrian.hunter@intel.com
[ committer note: Stash db_id using symbol_conf.priv_size + symbol__priv() and foo->priv areas ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cache the DWARF debug info for DSO so we don't have to rebuild it for each
address in the DSO.
Note that dso__new() uses calloc() so don't need to set dso->dwfl to NULL.
$ /tmp/perf.orig --version
perf version 3.18.rc1.gc2661b8
$ /tmp/perf.new --version
perf version 3.18.rc1.g402d62
$ perf stat -e cycles,instructions /tmp/perf.orig report -g > orig
Performance counter stats for '/tmp/perf.orig report -g':
6,428,177,183 cycles # 0.000 GHz
4,176,288,391 instructions # 0.65 insns per cycle
1.840666132 seconds time elapsed
$ perf stat -e cycles,instructions /tmp/perf.new report -g > new
Performance counter stats for '/tmp/perf.new report -g':
305,773,142 cycles # 0.000 GHz
276,048,272 instructions # 0.90 insns per cycle
0.087693543 seconds time elapsed
$ diff orig new
$
Changelog[v2]:
[Arnaldo Carvalho] Cache in existing global objects rather than create
new static/globals in functions.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20141022000958.GB2228@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With workload that spawns and destroys many threads and processes, it
was found that perf-mem could took a long time to post-process the perf
data after the target workload had completed its operation.
The performance bottleneck was found to be the lookup and insertion of
the new DSO structures (thousands of them in this case).
In a dual-socket Ivy-Bridge E7-4890 v2 machine (30-core, 60-thread), the
perf profile below shows what perf was doing after the profiled AIM7
shared workload completed:
- 83.94% perf libc-2.11.3.so [.] __strcmp_sse42
- __strcmp_sse42
- 99.82% map__new
machine__process_mmap_event
perf_session_deliver_event
perf_session__process_event
__perf_session__process_events
cmd_record
cmd_mem
run_builtin
main
__libc_start_main
- 13.17% perf perf [.] __dsos__findnew
__dsos__findnew
map__new
machine__process_mmap_event
perf_session_deliver_event
perf_session__process_event
__perf_session__process_events
cmd_record
cmd_mem
run_builtin
main
__libc_start_main
So about 97% of CPU times were spent in the map__new() function trying
to insert new DSO entry into the DSO linked list. The whole
post-processing step took about 9 minutes.
The DSO structures are currently searched linearly. So the total
processing time will be proportional to n^2.
To overcome this performance problem, the DSO code is modified to also
put the DSO structures in a RB tree sorted by its long name in
additional to being in a simple linked list. With this change, the
processing time will become proportional to n*log(n) which will be much
quicker for large n. However, the short name will still be searched
using the old linear searching method. With that patch in place, the
same perf-mem post-processing step took less than 30 seconds to
complete.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Link: http://lkml.kernel.org/r/1412098575-27863-3-git-send-email-Waiman.Long@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a precursor patch to enable long name searching of DSOs using
a rbtree.
In this patch, a new dsos structure is created which contains only a
list head structure for the moment.
The new dsos structure is used, in turn, in the machine structure for
the user_dsos and kernel_dsos fields.
Only the following 3 dsos functions are modified to accept the new dsos
structure parameter instead of list_head:
- dsos__add()
- dsos__find()
- __dsos__findnew()
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Link: http://lkml.kernel.org/r/1412021249-19201-2-git-send-email-Waiman.Long@hp.com
[ Move struct dsos to dso.h to reduce the dso methods depends on machine.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__type() determines wheather a dso is 32-bit, x32 (32-bit with 64-bit
registers) or 64-bit.
dso__type() will be used to determine the VDSO a program maps.
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406035081-14301-51-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to return the dso data size, for use in estimating the
size an instruction cache.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406035081-14301-27-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to track whether a caller has seen the data status of a
dso. This is needed to enable callers to report the error exactly once
only per dso.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406035081-14301-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 'data.status' to record whether a dso has data (i.e. an object
file). This is used to avoid repeatedly creating the file name and
attempting to open a file that is not present.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406035081-14301-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a flag to 'struct dso' to record if the dso is 64-bit or not.
Update the flag when reading the ELF.
This is needed for instruction decoding. For example, x86 instruction
decoding depends on whether or not the 64-bit instruction set is used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding file size check, because the lseek will succeed for
any offset behind file size and thus succeed when it was
expected to fail.
Factoring the code to check the offset against file size
earlier in the flow.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding global list of opened dso objects, so we can
track them and use the list for caching dso data file
descriptors.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-5-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding data_fd into dso object so we could handle caching
of opened dso file data descriptors coming int next patches.
Adding dso__data_close interface to keep the data_fd updated
when the descriptor is closed.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-4-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Add separated structure/namespace for data related
variables. We are going to add mode of them, so this
way they will be clearly separated.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1401892622-30848-3-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Arnaldo Carvalho de Melo