Currently write() will return 0 if an IR device does not support sending.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This simplies the code and resolves a possible race condition between
ir_raw_decode_timer_end() and saa7134_raw_decode_irq().
If the interrupt handler is called after ir_raw_decode_timer_end()
calls ir_raw_event_handle() but before clearing ir->active, then the
timer won't be rearmed.
Compile tested only.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The TechnoTrend USB IR Receiver sends 125 ISO URBs per second, even when
there is no IR activity. Reduce the number of wake ups from the other
drivers too.
This saves about 0.25ms/s on a 2.4GHz Core 2 according to powertop.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver adds support for TechnoTrend USB IR Receiver. It is a complete
rewrite of the staging/media/lirc/lirc_ttusbir driver. It adds more
accurate sample reporting and led control.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The Pioneer CU-700 remote causes receiver overflows if you hold down any
button. The remote does not send NEC IR repeats, it repeats the entire
NEC code after 20ms.
The iguanair hardware advertises an interval of 10 which just not enough;
with 100 URBs per second and at most 7 edges per URB, we handle at most
700 edges per second. The remote generates about 900.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
With the timeout supplied the interface can go idle. The keymap is
the same one as other drivers which do not come with a remote.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Firmware versions lower than 0x0205 use a different interface which is not
supported. Also report the firmware version in the standard format.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Rather than using usb_interrupt_msg() to receive responses, reuse the
urb callback we already have in place.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Move rtl2831u LED from streaming control to power control. It
changes LED behavior slightly but who cares :)
After that same streaming control can be used for both rtl2831u
and rtl2832u.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The camera requires the PROBE_MINMAX quirk. Add a corresponding entry in
the device IDs list.
Reported-by: Stefan Muenzel <stefanmuenzel@googlemail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The SPCAM SP620U camera uses the alternate "Y8 " GUID for the 8-bit
greyscale format, and supports a 12-bit greyscale format. Add support
for those in the driver, as well as for 10-bit greyscale formats.
Signed-off-by: Stefan Muenzel <stefanmuenzel@googlemail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Compute the maximum number of bytes per interval using the burst and
multiplier values for super speed endpoints.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Support for yet another SAA7146-based budget card (very similar to TT
S2-1600, but use LNBH23 instead ISL6423).
Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver adds support for stk1160 usb bridge as used in some
video/audio usb capture devices.
It is a complete rewrite of staging/media/easycap driver and
it's meant as a replacement.
As stk1160 allows communication with an ac97 codec chip, this
driver allows to register a control-only sound card to allow the user
to access ac97 controls.
Two devices have been used for testing:
* 1-cvbs video and 1-audio ac97 input,
* 4-cvbs inputs
Both of these devices reports with the same id [05e1:0408],
so the driver tries to support a superset of the capabilities.
By using keep_buffers module parameter it's possible to prevent
the driver from releasing urb buffers when streaming is stopped.
The usage of this parameter can avoid memory fragmentation that may
cause the driver to stop working on low memory systems.
A similar mechanism is implemented in em28xx driver (see commit 86d38d).
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
qt1010_init_meas2() returns zero on success and negative error codes on
failure so the return type should be int instead of u8.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If we set mantis->fe to NULL on an error its not a good idea to then try
passing NULL to the unregister paths and oopsing really.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The MEDIA_IOC_DEVICE_INFO ioctl was returning a positive value rather
than a negative error code when failing to copy output parameter to
user-space.
Tested by compilation only.
Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Those files were at the wrong place, probably due to the usage of a
previous version of dvb-usb-v2 tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Conversion of lmedm04 to dvb-usb-v2
Functional changes m88rs2000 tuner now uses all callbacks.
TODO migrate other tuners to the callbacks.
This patch is applied on top of [BUG] Re: dvb_usb_lmedm04 crash Kernel (rs2000)
http://patchwork.linuxtv.org/patch/13584/
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This DVB_FE_IOCTL_POST isn't used, so remove it.
Also, intercepting ioctl's like that only works with legacy ioctl's,
due to the way it was implemented. so this design is broken.
Document it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This was introduced on commit c2a6b54a9:
"em28xx: fix: don't do image interlacing on webcams"
The proposed patch by Ezequiel is wrong. The right fix here is to just
don't bother here if either the image is progressive or not.
Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix "symbol 'vb2_vmalloc_memops' was not declared. Should it be static?"
sparse warning.
Signed-off-by: Nicolas Thery <nicolas.thery@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is a missing error handling when no firmware file found.
It seems that this is more of a problem with udev-182+.
However, so far udev-182 is only a problem on first ever plug.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This code is based on ngene initial check-in (dae52d009f)
Signed-off-by: Patrice Chotard <patricechotard@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This remote sends a header pulse of 8150us followed by a space of 4000us.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[mchehab@redhat.com: fix a merge conflict at Documentation/video4linux/v4l2-framework.txt]
Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The resizer can output YUYV and UYVY in a wide range of sizes, making it
the best video node for regular V4L2 applications.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Enable the bridge automatically when the input format is YUYV8 or UYVY8.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The structure is only used to store configuration data and pass it to
CCDC configuration functions. Access the data directly from the
locations that need it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Those features are half-implemented and not used. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The bpp field currently stores the sample width and is aligned to the
next multiple of 8 bits when computing data size in memory. This won't
work anymore for YUYV8_2X8 formats. Split the bpp field into a sample
width and a bytes per pixel value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Rearrange the CFA interpolation coefficients table based on the Bayer
pattern. Support for non-Bayer CFA patterns is dropped as they were not
correctly supported, and have never been tested.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sean Young