Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c5vA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVRACfWQRqsz/IIs6MZsDY9dkj4+QVUWAAn0mN2uHR
mBox8w4TdTfG96jFXSfF
=WYKP
-----END PGP SIGNATURE-----
Merge tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.10-rc1.
Lots of little things in here, including:
- tasklet_setup api conversions
- sysrq support for capital letters
- vt and vc cleanups and unwinding the mess some more
- serial driver updates and minor tweaks
- new device ids
- rs485 support for some drivers
- serial binding documentation updates
- lots of small serial driver changes for reported issues
All have been in linux-next for a while with no reported issues"
* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
serial: mcf: add sysrq capability
serial: fsl_lpuart: add sysrq support when using dma
fbcon: remove no-op fbcon_set_origin()
tty/sysrq: Extend the sysrq_key_table to cover capital letters
serial: max310x: rework RX interrupt handling
serial: 8250_dw: Fix clk-notifier/port suspend deadlock
serial: 8250: Skip uninitialized TTY port baud rate update
serial: 8250: Discard RTS/DTS setting from clock update method
tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
serial: 8250_fsl: Fix TX interrupt handling condition
serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
tty: serial: lpuart: fix lpuart32_write usage
serial: qcom_geni_serial: To correct QUP Version detection logic
serial: mvebu-uart: fix unused variable warning
vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
pch_uart: drop double zeroing
...
- Remove the now unused pnp_find_card() function (Christoph Hellwig).
- Drop duplicate pci.h include from the quirks code and add an
"internal.h" include to acpi_pnp.c to fix a compiler warning (Tian
Tao).
-----BEGIN PGP SIGNATURE-----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=8YBU
-----END PGP SIGNATURE-----
Merge tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PNP updates from Rafael Wysocki:
"These clean the PNP code somewhat:
- Remove the now unused pnp_find_card() function (Christoph Hellwig)
- Drop duplicate pci.h include from the quirks code and add an
"internal.h" include to acpi_pnp.c to fix a compiler warning (Tian
Tao)"
* tag 'pnp-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PNP: remove the now unused pnp_find_card() function
PNP: ACPI: Fix missing-prototypes in acpi_pnp.c
PNP: quirks: Fix duplicate included pci.h
- Add support for generic initiator-only proximity domains to
the ACPI NUMA code and the architectures using it (Jonathan
Cameron).
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo).
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada).
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
* Add predefined names from the SMBus sepcification (Bob Moore).
* Update acpi_help UUID list (Bob Moore).
* Return exceptions for string-to-integer conversions in iASL (Bob
Moore).
* Add a new "ALL <NameSeg>" debugger command (Bob Moore).
* Add support for 64 bit risc-v compilation (Colin Ian King).
* Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap).
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung).
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko).
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo).
- Add missing config_item_put() to fix refcount leak (Hanjun Guo).
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo).
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings).
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov).
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao).
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing).
- Serialize tools/power/acpi Makefile (Thomas Renninger).
-----BEGIN PGP SIGNATURE-----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=feLU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it, clean up some
non-ACPICA code referring to debug facilities from ACPICA, reduce the
overhead related to accessing GPE registers, add a new DPTF (Dynamic
Power and Thermal Framework) participant driver, update the ACPICA
code in the kernel to upstream revision 20200925, add a new ACPI
backlight whitelist entry, fix a few assorted issues and clean up some
code.
Specifics:
- Add support for generic initiator-only proximity domains to the
ACPI NUMA code and the architectures using it (Jonathan Cameron)
- Clean up some non-ACPICA code referring to debug facilities from
ACPICA that are not actually used in there (Hanjun Guo)
- Add new DPTF driver for the PCH FIVR participant (Srinivas
Pandruvada)
- Reduce overhead related to accessing GPE registers in ACPICA and
the OS interface layer and make it possible to access GPE registers
using logical addresses if they are memory-mapped (Rafael Wysocki)
- Update the ACPICA code in the kernel to upstream revision 20200925
including changes as follows:
+ Add predefined names from the SMBus sepcification (Bob Moore)
+ Update acpi_help UUID list (Bob Moore)
+ Return exceptions for string-to-integer conversions in iASL (Bob
Moore)
+ Add a new "ALL <NameSeg>" debugger command (Bob Moore)
+ Add support for 64 bit risc-v compilation (Colin Ian King)
+ Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap)
- Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex
Hung)
- Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out
Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko)
- Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo)
- Add missing config_item_put() to fix refcount leak (Hanjun Guo)
- Drop lefrover field from struct acpi_memory_device (Hanjun Guo)
- Make the ACPI extlog driver check for RDMSR failures (Ben
Hutchings)
- Fix handling of lid state changes in the ACPI button driver when
input device is closed (Dmitry Torokhov)
- Fix several assorted build issues (Barnabás Pőcze, John Garry,
Nathan Chancellor, Tian Tao)
- Drop unused inline functions and reduce code duplication by using
kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing)
- Serialize tools/power/acpi Makefile (Thomas Renninger)"
* tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPICA: Update version to 20200925 Version 20200925
ACPICA: Remove unnecessary semicolon
ACPICA: Debugger: Add a new command: "ALL <NameSeg>"
ACPICA: iASL: Return exceptions for string-to-integer conversions
ACPICA: acpi_help: Update UUID list
ACPICA: Add predefined names found in the SMBus sepcification
ACPICA: Tree-wide: fix various typos and spelling mistakes
ACPICA: Drop the repeated word "an" in a comment
ACPICA: Add support for 64 bit risc-v compilation
ACPI: button: fix handling lid state changes when input device closed
tools/power/acpi: Serialize Makefile
ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug()
ACPI: memhotplug: Remove 'state' from struct acpi_memory_device
ACPI / extlog: Check for RDMSR failure
ACPI: Make acpi_evaluate_dsm() prototype consistent
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
...
- Rework cpufreq statistics collection to allow it to take place
when fast frequency switching is enabled in the governor (Viresh
Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core
code to support driver-specific devfreq DT bindings (Leonard
Crestez, Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection
statistics and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC
mode (Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow
domain power off transition to be aborted in the absence of the
"power off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they
are power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) driverrs (Kevin Hilman).
-----BEGIN PGP SIGNATURE-----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=rGhy
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
Merge misc updates from Andrew Morton:
"181 patches.
Subsystems affected by this patch series: kbuild, scripts, ntfs,
ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise,
gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma,
memory-failure, vmallo and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits)
mm/migrate: remove obsolete comment about device public
mm/migrate: remove cpages-- in migrate_vma_finalize()
mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
memblock: use separate iterators for memory and reserved regions
memblock: implement for_each_reserved_mem_region() using __next_mem_region()
memblock: remove unused memblock_mem_size()
x86/setup: simplify reserve_crashkernel()
x86/setup: simplify initrd relocation and reservation
arch, drivers: replace for_each_membock() with for_each_mem_range()
arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
memblock: reduce number of parameters in for_each_mem_range()
memblock: make memblock_debug and related functionality private
memblock: make for_each_memblock_type() iterator private
mircoblaze: drop unneeded NUMA and sparsemem initializations
riscv: drop unneeded node initialization
h8300, nds32, openrisc: simplify detection of memory extents
arm64: numa: simplify dummy_numa_init()
arm, xtensa: simplify initialization of high memory pages
dma-contiguous: simplify cma_early_percent_memory()
KVM: PPC: Book3S HV: simplify kvm_cma_reserve()
...
In the cgroup v1, we have a numa_stat interface. This is useful for
providing visibility into the numa locality information within an memcg
since the pages are allowed to be allocated from any physical node. One
of the use cases is evaluating application performance by combining this
information with the application's CPU allocation. But the cgroup v2 does
not. So this patch adds the missing information.
Suggested-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20200916100030.71698-2-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=9vEl
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"The big new thing is the fully lockless ringbuffer implementation,
including the support for continuous lines. It will allow to store and
read messages in any situation wihtout the risk of deadlocks and
without the need of temporary per-CPU buffers.
The access is still serialized by logbuf_lock. It synchronizes few
more operations, for example, temporary buffer for formatting the
message, syslog and kmsg_dump operations. The lock removal is being
discussed and should be ready for the next release.
The continuous lines are handled exactly the same way as before to
avoid regressions in user space. It means that they are appended to
the last message when the caller is the same. Only the last message
can be extended.
The data ring includes plain text of the messages. Except for an
integer at the beginning of each message that points back to the
descriptor ring with other metadata.
The dictionary has to stay. journalctl uses it to filter the log. It
allows to show messages related to a given device. The dictionary
values are stored in the descriptor ring with the other metadata.
This is the first part of the printk rework as discussed at Plumbers
2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The
next big step will be handling consoles by kthreads during the normal
system operation. It will require special handling of situations when
the kthreads could not get scheduled, for example, early boot,
suspend, panic.
Other changes:
- Add John Ogness as a reviewer for printk subsystem. He is author of
the rework and is familiar with the code and history.
- Fix locking in serial8250_do_startup() to prevent lockdep report.
- Few code cleanups"
* tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits)
printk: Use fallthrough pseudo-keyword
printk: reduce setup_text_buf size to LOG_LINE_MAX
printk: avoid and/or handle record truncation
printk: remove dict ring
printk: move dictionary keys to dev_printk_info
printk: move printk_info into separate array
printk: reimplement log_cont using record extension
printk: ringbuffer: add finalization/extension support
printk: ringbuffer: change representation of states
printk: ringbuffer: clear initial reserved fields
printk: ringbuffer: add BLK_DATALESS() macro
printk: ringbuffer: relocate get_data()
printk: ringbuffer: avoid memcpy() on state_var
printk: ringbuffer: fix setting state in desc_read()
kernel.h: Move oops_in_progress to printk.h
scripts/gdb: update for lockless printk ringbuffer
scripts/gdb: add utils.read_ulong()
docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo
printk: reduce LOG_BUF_SHIFT range for H8300
printk: ringbuffer: support dataless records
...
Core changes:
- The big core change is the updated (v2) userspace character
device API. This corrects badly designed 64-bit alignment around
the line events. We also add the debounce request feature.
This echoes the often quotes passage from Frederick Brooks
"The mythical man-month" to always throw one away, which we
have seen before in things such as V4L2. So we put in a new
one and deprecate and obsolete the old one.
- All example tools in tools/gpio/* are migrated to the new API
to set a good example. The libgpiod userspace library has been
augmented to use this new API pretty much from day 1.
- Some misc API hardening by using strn* function calls has been
added as well.
- Use the simpler IDA interface for GPIO chip instance enumeration.
- Add device core function for counting string arrays in
device properties.
- Provide a generic library function kfree_strarray() that can
be used throughout the kernel.
Driver enhancements:
- The DesignWare dwapb-gpio driver has been enhanced and now
uses the IRQ handling in the gpiolib core.
- The mockup and aggregator drivers have seen some substantial
code clean-up and now use more of the core kernel
inftrastructure.
- Misc cleanups using dev_err_probe().
- The MXC drivers (Freescale/NXP) can now be built modularized,
which makes modularized GKI Android kernels happy.
-----BEGIN PGP SIGNATURE-----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=8CE2
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This time very little driver changes but lots of core changes.
We have some interesting cooperative work for ARM and Intel alike,
making the GPIO subsystem more and more suitable for industrial
systems and the like, in addition to the in-kernel users.
We touch driver core (device properties) and lib/* by adding one
simple string array free function, these are authored by Andy
Shevchenko who is a well known and recognized core helpers maintainers
so this should be fine.
We also see some Android GKI-related modularization in the MXC
drivers.
Core changes:
- The big core change is the updated (v2) userspace character device
API.
This corrects badly designed 64-bit alignment around the line
events. We also add the debounce request feature. This echoes the
often quotes passage from Frederick Brooks "The mythical man-month"
to always throw one away, which we have seen before in things such
as V4L2. So we put in a new one and deprecate and obsolete the old
one.
- All example tools in tools/gpio/* are migrated to the new API to
set a good example. The libgpiod userspace library has been
augmented to use this new API pretty much from day 1.
- Some misc API hardening by using strn* function calls has been
added as well.
- Use the simpler IDA interface for GPIO chip instance enumeration.
- Add device core function for counting string arrays in device
properties.
- Provide a generic library function kfree_strarray() that can be
used throughout the kernel.
Driver enhancements:
- The DesignWare dwapb-gpio driver has been enhanced and now uses the
IRQ handling in the gpiolib core.
- The mockup and aggregator drivers have seen some substantial code
clean-up and now use more of the core kernel inftrastructure.
- Misc cleanups using dev_err_probe().
- The MXC drivers (Freescale/NXP) can now be built modularized, which
makes modularized GKI Android kernels happy"
* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
gpiolib: Update header block in gpiolib-cdev.h
gpiolib: cdev: switch from kstrdup() to kstrndup()
docs: gpio: add a new document to its index.rst
gpio: pca953x: Add support for the NXP PCAL9554B/C
tools: gpio: add debounce support to gpio-event-mon
tools: gpio: add multi-line monitoring to gpio-event-mon
tools: gpio: port gpio-event-mon to v2 uAPI
tools: gpio: port gpio-hammer to v2 uAPI
tools: gpio: rename nlines to num_lines
tools: gpio: port gpio-watch to v2 uAPI
tools: gpio: port lsgpio to v2 uAPI
gpio: uapi: document uAPI v1 as deprecated
gpiolib: cdev: support setting debounce
gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
gpiolib: cdev: support edge detection for uAPI v2
gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
gpiolib: add build option for CDEV v1 ABI
gpiolib: make cdev a build option
...
-----BEGIN PGP SIGNATURE-----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=bQuH
-----END PGP SIGNATURE-----
Merge tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the usbvision driver was dropped from staging
- the Zoran driver were re-added at staging. It gained lots of
improvements, and was converted to use videobuf2 API
- a new virtual driver (vidtv) was added in order to allow testing the
digital TV framework and APIs
- the media uAPI documentation gained a glossary with commonly used
terms, helping to simplify some parts of the docs
- more cleanups at the atomisp driver
- Mediatek VPU gained support for MT8183
- added support for codecs with supports doing colorspace conversion
(CSC)
- support for CSC API was added at vivid and rksip1 drivers
- added a helper core support and uAPI for better supporting H.264
codecs
- added support for Renesas R8A774E1
- use the new SPDX GFDL-1.1-no-invariants-or-later license on media
uAPI docs, instead of a license text
- Venus driver has gained VP9 codec support
- lots of other cleanups and driver improvements
* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
media: tvp7002: fix uninitialized variable warning
media: s5k5baf: drop 'data' field in struct s5k5baf_fw
media: dt-bindings: media: venus: Add an optional power domain for perf voting
media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
media: staging: rkisp1: uapi: Do not use BIT() macro
media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
media: usbtv: Fix refcounting mixup
media: zoran.rst: place it at the right place this time
media: add Zoran cardlist
media: admin-guide: update cardlists
media: siano: rename a duplicated card string
media: zoran: move documentation file to the right place
media: atomisp: fixes build breakage for ISP2400 due to a cleanup
media: zoran: fix mixed case on vars
media: zoran: get rid of an unused var
media: zoran: use upper case for card types
media: zoran: fix sparse warnings
media: zoran: fix smatch warning
media: zoran: update TODO
...
* acpi-numa:
docs: mm: numaperf.rst Add brief description for access class 1.
node: Add access1 class to represent CPU to memory characteristics
ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3
ACPI: Let ACPI know we support Generic Initiator Affinity Structures
x86: Support Generic Initiator only proximity domains
ACPI: Support Generic Initiator only domains
ACPI / NUMA: Add stub function for pxm_to_node()
irq-chip/gic-v3-its: Fix crash if ITS is in a proximity domain without processor or memory
ACPI: Remove side effect of partly creating a node in acpi_get_node()
ACPI: Rename acpi_map_pxm_to_online_node() to pxm_to_online_node()
ACPI: Remove side effect of partly creating a node in acpi_map_pxm_to_online_node()
ACPI: Do not create new NUMA domains from ACPI static tables that are not SRAT
ACPI: Add out of bounds and numa_off protections to pxm_to_node()
no conflicts at all. This pull includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+ErNYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y284H/3bv9fahbg16AJcKYqJXFHGpDs3CsASPnJqQ
9HQoV5tg6Qd4kI3oFb+30l8SK73Wr2t685/DhOPDRR/vN3B5M1vOQvPRL/dEqiwi
aUEhtMbnC/trSbteXsjGDWT+1EnI/+R3NFV++WiRp1XxE4DRXL3xySTeviR0IW+V
rQxU7VCcVp0bklVH+gqjrsvqU5iZeckyZB6evc8X92ThhzjNprR5KVxxgl1wxcu/
dPYizHoKYVoLVNw50rwPGt2hmq9RpyDM6Xh9UhLHcA57ENyzr8NNTJBOT0tVMTWV
smU01X/ECoy54kj1w8AKP+f7F0G7DUU+Jz68X0X/kYPq520dUs4=
=Ovox
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"As hoped, things calmed down for docs this cycle; fewer changes and
almost no conflicts at all. This includes:
- A reworked and expanded user-mode Linux document
- Some simplifications and improvements for submitting-patches.rst
- An emergency fix for (some) problems with Sphinx 3.x
- Some welcome automarkup improvements to automatically generate
cross-references to struct definitions and other documents
- The usual collection of translation updates, typo fixes, etc"
* tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits)
gpiolib: Update indentation in driver.rst for code excerpts
Documentation/admin-guide: tainted-kernels: Fix typo occured
Documentation: better locations for sysfs-pci, sysfs-tagging
docs: programming-languages: refresh blurb on clang support
Documentation: kvm: fix a typo
Documentation: Chinese translation of Documentation/arm64/amu.rst
doc: zh_CN: index files in arm64 subdirectory
mailmap: add entry for <mstarovoitov@marvell.com>
doc: seq_file: clarify role of *pos in ->next()
docs: trace: ring-buffer-design.rst: use the new SPDX tag
Documentation: kernel-parameters: clarify "module." parameters
Fix references to nommu-mmap.rst
docs: rewrite admin-guide/sysctl/abi.rst
docs: fb: Remove vesafb scrollback boot option
docs: fb: Remove sstfb scrollback boot option
docs: fb: Remove matroxfb scrollback boot option
docs: fb: Remove framebuffer scrollback boot option
docs: replace the old User Mode Linux HowTo with a new one
Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev"
Documentation/admin-guide: README & svga: remove use of "rdev"
...
* Move clearcpuid= parameter handling earlier in the boot, away from the
FPU init code and to a generic location, by Mike Hommey.
-----BEGIN PGP SIGNATURE-----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=lvdt
-----END PGP SIGNATURE-----
Merge tag 'x86_fpu_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Borislav Petkov:
- Allow clearcpuid= to accept multiple bits (Arvind Sankar)
- Move clearcpuid= parameter handling earlier in the boot, away from
the FPU init code and to a generic location (Mike Hommey)
* tag 'x86_fpu_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Handle FPU-related and clearcpuid command line arguments earlier
x86/fpu: Allow multiple bits in clearcpuid= parameter
- Userspace support for the Memory Tagging Extension introduced by Armv8.5.
Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including the
addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU driver and
also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT failure.
- Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+AUXMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFc1B/4q2Kabe+pPu7s1f58Q+OTaEfqcr3F1qh27
F1YpFZUYxg0GPfPsFrnbJpo5WKo7wdR9ceI9yF/GHjs7A/MSoQJis3pG6SlAd9c0
nMU5tCwhg9wfq6asJtl0/IPWem6cqqhdzC6m808DjeHuyi2CCJTt0vFWH3OeHEhG
cfmLfaSNXOXa/MjEkT8y1AXJ/8IpIpzkJeCRA1G5s18PXV9Kl5bafIo9iqyfKPLP
0rJljBmoWbzuCSMc81HmGUQI4+8KRp6HHhyZC/k0WEVgj3LiumT7am02bdjZlTnK
BeNDKQsv2Jk8pXP2SlrI3hIUTz0bM6I567FzJEokepvTUzZ+CVBi
=9J8H
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's quite a lot of code here, but much of it is due to the
addition of a new PMU driver as well as some arm64-specific selftests
which is an area where we've traditionally been lagging a bit.
In terms of exciting features, this includes support for the Memory
Tagging Extension which narrowly missed 5.9, hopefully allowing
userspace to run with use-after-free detection in production on CPUs
that support it. Work is ongoing to integrate the feature with KASAN
for 5.11.
Another change that I'm excited about (assuming they get the hardware
right) is preparing the ASID allocator for sharing the CPU page-table
with the SMMU. Those changes will also come in via Joerg with the
IOMMU pull.
We do stray outside of our usual directories in a few places, mostly
due to core changes required by MTE. Although much of this has been
Acked, there were a couple of places where we unfortunately didn't get
any review feedback.
Other than that, we ran into a handful of minor conflicts in -next,
but nothing that should post any issues.
Summary:
- Userspace support for the Memory Tagging Extension introduced by
Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including
the addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing
page-tables with the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a
no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU
driver and also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT
failure.
- Improve robustness of user-visible HWCAP strings and their
corresponding numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in
preparation for potential future optimisation of handling across
syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
Revert "arm64: initialize per-cpu offsets earlier"
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
...
All user of the pnp_find_card() compat wrapper are gone, so remove
the function as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-cpuidle:
cpuidle: record state entry rejection statistics
cpuidle: psci: Allow PM domain to be initialized even if no OSI mode
firmware: psci: Extend psci_set_osi_mode() to allow reset to PC mode
ACPI: processor: Print more information when acpi_processor_evaluate_cst() fails
cpuidle: tegra: Correctly handle result of arm_cpuidle_simple_enter()
Try to make minimal changes to the document which already describes
access class 0 in a generic fashion (including IO initiatiors that
are not CPUs).
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All slots in sysrq_key_table[] are either used, reserved or at least
commented with their intended use. This patch adds capital letter versions
available, which means adding 26 more entries.
For already existing SysRq operations the user presses Alt-SysRq-<key>, and
for the newly added ones Alt-Shift-SysRq-<key>.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20200818112825.6445-2-andrzej.p@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two different variants for Hauppauge WinTV MiniCard:
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = {
.name = "Hauppauge WinTV MiniCard",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX,
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = 29,
.board_cfg.foreign_lna0_ctrl = 29,
.rf_switch = 17,
.board_cfg.rf_switch_uhf = 17,
},
[SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
.name = "Hauppauge WinTV MiniCard Rev 2",
.type = SMS_NOVA_B0,
.fw[DEVICE_MODE_DVBT_BDA] = SMS_FW_DVBT_HCW_55XXX,
.default_mode = DEVICE_MODE_DVBT_BDA,
.lna_ctrl = -1,
},
As it can be seen, the RF part of the definitions are different.
So, better to use different names in order to distinguish
between them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several :c:type: definitions there, in order to
do cross-references with the driver's documentation.
Those are broken when docs are built with Sphinx 3.x, as
it would require :c:struct: instead.
For Sphinx < 3.x, the automarkup.py extension is able to do the
replacement already, and a future improvement on it should make
it also work with Sphinx 3.x.
So, get rid of the usage of the :c:type: macro there.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix a reStructuredText syntax error in the cpuidle PM admin-guide
documentation: the ``...'' quotation marks are parsed as partial ''...''
reStructuredText markup and break the output formatting.
This change them to "...".
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There's some documentation for gpio-mockup's debugfs interface in the
driver's source but it's not much. Add proper documentation for this
testing module.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Initial driver for PMU event counting on the Arm CMN-600 interconnect.
CMN sports an obnoxiously complex distributed PMU system as part of
its debug and trace features, which can do all manner of things like
sampling, cross-triggering and generating CoreSight trace. This driver
covers the PMU functionality, plus the relevant aspects of watchpoints
for simply counting matching flits.
Tested-by: Tsahi Zidenberg <tsahee@amazon.com>
Tested-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
We forget to add the suffix to the workingset_restore string, so fix it.
And also update the documentation of cgroup-v2.rst.
Fixes: 170b04b7ae ("mm/workingset: prepare the workingset detection infrastructure for anon LRU")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20200916100030.71698-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The command-line parameters "dyndbg" and "async_probe" are not
parameters for kernel/module.c but instead they are for the
module that is being loaded. Try to make that distinction in the
help text.
OTOH, "module.sig_enforce" is handled as a parameter of kernel/module.c
so "module." is correct for it.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/67d40b6d-c073-a3bf-cbb6-6cad941cceeb@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Following the structure used in sysctl/kernel.rst, this updates
abi.rst to use ReStructured Text more fully and updates the entries to
match current kernels:
* the list of files is now the table of contents;
* links are used to point to other documentation and other sections;
* all the existing entries are no longer present, so this removes
them;
* document vsyscall32.
Mentions of the kernel version are dropped. Since the document is
entirely rewritten, I've replaced the copyright statement.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200917072123.8847-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reformat "lapic=" to try to make it more understandable and similar
to the style that is mostly used in this file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200918054739.2523-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
CMA only depends on MMU. It doesn't depend on arch too much. such as ARM,
ARM64, X86, MIPS etc. so We remove the dependency of cma about the
architecture in kernel-parameters.txt.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/1600412758-60545-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since crash utility has been moved to github, the original URL is no
longer available. Let's update it accordingly.
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Link: https://lore.kernel.org/r/a088bff5-1174-25fa-ac26-6e46795f4085@redhat.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
For the "machtype" boot parameter,
fix word spacing, line wrap, and plural of "laptops".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/c9059e35-188d-a749-1907-767b53479328@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add document entry for kvm_cma_resv_ratio kernel param which
is used to alter the KVM contiguous memory allocation percentage
for hash pagetable allocation used by hash mode PowerPC KVM guests.
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20200921090220.14981-1-sathnaga@linux.vnet.ibm.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
CPUs may fail to enter the chosen idle state if there was a
pending interrupt, causing the cpuidle driver to return an error
value.
Record that and export it via sysfs along with the other idle state
statistics.
This could prove useful in understanding behavior of the governor
and the system during usecases that involve multiple CPUs.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[ rjw: Changelog and documentation edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 27f5411a71 ("dm crypt: support using encrypted keys")
introduced support for encrypted keyring type.
Fix documentation in admin guide to mention this type.
Fixes: 27f5411a71 ("dm crypt: support using encrypted keys")
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
Following the structure used in sysctl/kernel.rst, this updates
abi.rst to use ReStructured Text more fully and updates the entries to
match current kernels:
* the list of files is now the table of contents;
* links are used to point to other documentation and other sections;
* all the existing entries are no longer present, so this removes
them;
* document vsyscall32.
Mentions of the kernel version are dropped. Since the document is
entirely rewritten, I've replaced the copyright statement.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200911190152.29730-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add support for extending the newest data block. For this, introduce
a new finalization state (desc_finalized) denoting a committed
descriptor that cannot be extended.
Until a record is finalized, a writer can reopen that record to
append new data. Reopening a record means transitioning from the
desc_committed state back to the desc_reserved state.
A writer can explicitly finalize a record if there is no intention
of extending it. Also, records are automatically finalized when a
new record is reserved. This relieves writers of needing to
explicitly finalize while also making such records available to
readers sooner. (Readers can only traverse finalized records.)
Four new memory barrier pairs are introduced. Two of them are
insignificant additions (data_realloc:A/desc_read:D and
data_realloc:A/data_push_tail:B) because they are alternate path
memory barriers that exactly match the purpose, pairing, and
context of the two existing memory barrier pairs they provide an
alternate path for. The other two new memory barrier pairs are
significant additions:
desc_reopen_last:A / _prb_commit:B - When reopening a descriptor,
ensure the state transitions back to desc_reserved before
fully trusting the descriptor data.
_prb_commit:B / desc_reserve:D - When committing a descriptor,
ensure the state transitions to desc_committed before checking
the head ID to see if the descriptor needs to be finalized.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200914123354.832-6-john.ogness@linutronix.de
Linus Torvalds