Commit Graph

5392 Commits

Author SHA1 Message Date
Jakub Kicinski 44a8c4f33c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.

Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-04 21:28:59 -07:00
Linus Torvalds 3e8d3bdc2a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi
    Kivilinna.

 2) Fix loss of RTT samples in rxrpc, from David Howells.

 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu.

 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka.

 5) We disable BH for too lokng in sctp_get_port_local(), add a
    cond_resched() here as well, from Xin Long.

 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu.

 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from
    Yonghong Song.

 8) Missing of_node_put() in mt7530 DSA driver, from Sumera
    Priyadarsini.

 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan.

10) Fix geneve tunnel checksumming bug in hns3, from Yi Li.

11) Memory leak in rxkad_verify_response, from Dinghao Liu.

12) In tipc, don't use smp_processor_id() in preemptible context. From
    Tuong Lien.

13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu.

14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter.

15) Fix ABI mismatch between driver and firmware in nfp, from Louis
    Peens.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits)
  net/smc: fix sock refcounting in case of termination
  net/smc: reset sndbuf_desc if freed
  net/smc: set rx_off for SMCR explicitly
  net/smc: fix toleration of fake add_link messages
  tg3: Fix soft lockup when tg3_reset_task() fails.
  doc: net: dsa: Fix typo in config code sample
  net: dp83867: Fix WoL SecureOn password
  nfp: flower: fix ABI mismatch between driver and firmware
  tipc: fix shutdown() of connectionless socket
  ipv6: Fix sysctl max for fib_multipath_hash_policy
  drivers/net/wan/hdlc: Change the default of hard_header_len to 0
  net: gemini: Fix another missing clk_disable_unprepare() in probe
  net: bcmgenet: fix mask check in bcmgenet_validate_flow()
  amd-xgbe: Add support for new port mode
  net: usb: dm9601: Add USB ID of Keenetic Plus DSL
  vhost: fix typo in error message
  net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
  pktgen: fix error message with wrong function name
  net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
  cxgb4: fix thermal zone device registration
  ...
2020-09-03 18:50:48 -07:00
Linus Torvalds 8381979dfa Merge branch 'gate-page-refcount' (patches from Dave Hansen)
Merge gate page refcount fix from Dave Hansen:
 "During the conversion over to pin_user_pages(), gate pages were missed.

  The fix is pretty simple, and is accompanied by a new test from Andy
  which probably would have caught this earlier"

* emailed patches from Dave Hansen <dave.hansen@linux.intel.com>:
  selftests/x86/test_vsyscall: Improve the process_vm_readv() test
  mm: fix pin vs. gup mismatch with gate pages
2020-09-03 18:43:06 -07:00
Andy Lutomirski 8891adc61d selftests/x86/test_vsyscall: Improve the process_vm_readv() test
The existing code accepted process_vm_readv() success or failure as long
as it didn't return garbage.  This is too weak: if the vsyscall page is
readable, then process_vm_readv() should succeed and, if the page is not
readable, then it should fail.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-03 18:36:55 -07:00
Po-Hsu Lin 30ae801746 selftests/net: improve descriptions for XFAIL cases in psock_snd.sh
Before changing this it's a bit confusing to read test output:
  raw csum_off with bad offset (fails)
  ./psock_snd: write: Invalid argument

Change "fails" in the test case description to "expected to fail", so
that the test output can be more understandable.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03 14:59:10 -07:00
Davide Caratti c6f4c2b027 selftests: mptcp: fix typo in mptcp_connect usage
in mptcp_connect, 's' selects IPPROTO_MPTCP / IPPROTO_TCP as the value of
'protocol' in socket(), and 'm' switches between different send / receive
modes. Fix die_usage(): swap 'm' and 's' and add missing 'sendfile' mode.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-02 14:12:44 -07:00
David S. Miller 150f29f5e6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2020-09-01

The following pull-request contains BPF updates for your *net-next* tree.

There are two small conflicts when pulling, resolve as follows:

1) Merge conflict in tools/lib/bpf/libbpf.c between 88a8212028 ("libbpf: Factor
   out common ELF operations and improve logging") in bpf-next and 1e891e513e
   ("libbpf: Fix map index used in error message") in net-next. Resolve by taking
   the hunk in bpf-next:

        [...]
        scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx);
        data = elf_sec_data(obj, scn);
        if (!scn || !data) {
                pr_warn("elf: failed to get %s map definitions for %s\n",
                        MAPS_ELF_SEC, obj->path);
                return -EINVAL;
        }
        [...]

2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between
   9647c57b11 ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for
   better performance") in bpf-next and e20f0dbf20 ("net/mlx5e: RX, Add a prefetch
   command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining
   net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like:

        [...]
        xdp_set_data_meta_invalid(xdp);
        xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool);
        net_prefetch(xdp->data);
        [...]

We've added 133 non-merge commits during the last 14 day(s) which contain
a total of 246 files changed, 13832 insertions(+), 3105 deletions(-).

The main changes are:

1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper
   for tracing to reliably access user memory, from Alexei Starovoitov.

2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau.

3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa.

4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson.

5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko.

6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh.

7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer.

8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song.

9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant.

10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee.

11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua.

12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski.

13) Various smaller cleanups and improvements all over the place.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-01 13:22:59 -07:00
Alexei Starovoitov f56407fa6e bpf: Remove bpf_lsm_file_mprotect from sleepable list.
Technically the bpf programs can sleep while attached to bpf_lsm_file_mprotect,
but such programs need to access user memory. So they're in might_fault()
category. Which means they cannot be called from file_mprotect lsm hook that
takes write lock on mm->mmap_lock.
Adjust the test accordingly.

Also add might_fault() to __bpf_prog_enter_sleepable() to catch such deadlocks early.

Fixes: 1e6c62a882 ("bpf: Introduce sleepable BPF programs")
Fixes: e68a144547 ("selftests/bpf: Add sleepable tests")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200831201651.82447-1-alexei.starovoitov@gmail.com
2020-08-31 23:03:57 +02:00
David S. Miller e9d572d94e Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Do not delete clash entries on reply, let them expire instead,
   from Florian Westphal.

2) Do not report EAGAIN to nfnetlink, otherwise this enters a busy loop.
   Update nfnetlink_unicast() to translate EAGAIN to ENOBUFS.

3) Remove repeated words in code comments, from Randy Dunlap.

4) Several patches for the flowtable selftests, from Fabian Frederick.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-31 11:22:30 -07:00
Linus Torvalds 8bb5021cc2 powerpc fixes for 5.9 #4
Revert our removal of PROT_SAO, at least one user expressed an interest in using
 it on Power9. Instead don't allow it to be used in guests unless enabled
 explicitly at compile time.
 
 A fix for a crash introduced by a recent change to FP handling.
 
 Revert a change to our idle code that left Power10 with no idle support.
 
 One minor fix for the new scv system call path to set PPR.
 
 Fix a crash in our "generic" PMU if branch stack events were enabled.
 
 A fix for the IMC PMU, to correctly identify host kernel samples.
 
 The ADB_PMU powermac code was found to be incompatible with VMAP_STACK, so make
 them incompatible in Kconfig until the code can be fixed.
 
 A build fix in drivers/video/fbdev/controlfb.c, and a documentation fix.
 
 Thanks to:
   Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy, Giuseppe Sacco,
   Madhavan Srinivasan, Milton Miller, Nicholas Piggin, Pratik Rajesh Sampat,
   Randy Dunlap, Shawn Anastasio, Vaidyanathan Srinivasan.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl9LlF8THG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgEwJD/4nEkp9id7bZyiGruoawqxdpmc9viIp
 JFRH3+eHWbE5rfoXn7fwM1zTE9SsHxCd0q09cHk2rtAwKMXcJW83/pXNuWEjIzcy
 7Ra8Zq2jRl6qgWAx84VKoZVg+W40yNFex0M0akMQV55SjYOTN8gpGe+algi+wPaH
 44oYBYctDi3B9X8CsaUQEdov1EZdWT6TxcN9xIJiIdr53VXMER6C+ytYV8VgkGHW
 Qt+Ardyvp6eNq9+foGegRSk3OmNcmj+CJZYzhkp5+1k9ko9GQ8wg9NzxTV4ZoSJ9
 g5rgD4ztBfLGyUDu6oUypzOnSVbfzJh9JPH/h1zaSOjSv9MnJ20zqvqjD7QXFNbs
 j960PiylTfVWdnOoUUkvON0UOYZM9XiZP63i8z/mBsMJ5BFaLB1TonZ+lDwXc1vK
 MHXhjahP2qP0LnJZ/M5gT3zfLPyrKoeIlmLTOkLjrM5C9mcSxpPnagq+AHacfYpG
 sGrg2LGLfBo/9PomUNHseQhBfsc2uYwM924si9MpNWN6BT+TNgTJYeNPDOnvRCbG
 ivDQ7HFZ6aiOj+b5iTZI2RV3EOaBKZgo+VEryNDnqd7etjyDr5PNbooGaHJDgsnz
 mNFxUNusxzv0vMI3zyFtLMTe/99/NlRSYyMXPL8SL7MvlRt624ngrrxYv+2+dBRt
 aIpxSpgdqTVXSw==
 =t+yB
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Revert our removal of PROT_SAO, at least one user expressed an
   interest in using it on Power9. Instead don't allow it to be used in
   guests unless enabled explicitly at compile time.

 - A fix for a crash introduced by a recent change to FP handling.

 - Revert a change to our idle code that left Power10 with no idle
   support.

 - One minor fix for the new scv system call path to set PPR.

 - Fix a crash in our "generic" PMU if branch stack events were enabled.

 - A fix for the IMC PMU, to correctly identify host kernel samples.

 - The ADB_PMU powermac code was found to be incompatible with
   VMAP_STACK, so make them incompatible in Kconfig until the code can
   be fixed.

 - A build fix in drivers/video/fbdev/controlfb.c, and a documentation
   fix.

Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.

* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
  Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
  powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
  powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
  powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
  powerpc/64s: scv entry should set PPR
  Documentation/powerpc: fix malformed table in syscall64-abi
  video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
  selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
  powerpc/64s: Disallow PROT_SAO in LPARs by default
  Revert "powerpc/64s: Remove PROT_SAO support"
2020-08-30 10:56:12 -07:00
Alexei Starovoitov e68a144547 selftests/bpf: Add sleepable tests
Modify few tests to sanity test sleepable bpf functionality.

Running 'bench trig-fentry-sleep' vs 'bench trig-fentry' and 'perf report':
sleepable with SRCU:
   3.86%  bench     [k] __srcu_read_unlock
   3.22%  bench     [k] __srcu_read_lock
   0.92%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep
   0.50%  bench     [k] bpf_trampoline_10297
   0.26%  bench     [k] __bpf_prog_exit_sleepable
   0.21%  bench     [k] __bpf_prog_enter_sleepable

sleepable with RCU_TRACE:
   0.79%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry_sleep
   0.72%  bench     [k] bpf_trampoline_10381
   0.31%  bench     [k] __bpf_prog_exit_sleepable
   0.29%  bench     [k] __bpf_prog_enter_sleepable

non-sleepable with RCU:
   0.88%  bench     [k] bpf_prog_740d4210cdcd99a3_bench_trigger_fentry
   0.84%  bench     [k] bpf_trampoline_10297
   0.13%  bench     [k] __bpf_prog_enter
   0.12%  bench     [k] __bpf_prog_exit

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-6-alexei.starovoitov@gmail.com
2020-08-28 21:20:33 +02:00
Fabian Frederick 67afbda696 selftests: netfilter: add command usage
Avoid bad command arguments.
Based on tools/power/cpupower/bench/cpufreq-bench_plot.sh

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-28 20:12:00 +02:00
Fabian Frederick 2f4bba4ef7 selftests: netfilter: simplify command testing
Fix some shellcheck SC2181 warnings:
"Check exit code directly with e.g. 'if mycmd;', not indirectly with
$?." as suggested by Stefano Brivio.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-28 20:11:59 +02:00
Fabian Frederick d721b68654 selftests: netfilter: remove unused variable in make_file()
'who' variable was not used in make_file()
Problem found using Shellcheck

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-28 20:11:59 +02:00
Fabian Frederick a7bf670ebe selftests: netfilter: exit on invalid parameters
exit script with comments when parameters are wrong during address
addition. No need for a message when trying to change MTU with lower
values: output is self-explanatory.
Use short testing sequence to avoid shellcheck warnings
(suggested by Stefano Brivio).

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-28 20:11:59 +02:00
Fabian Frederick da2f849e89 selftests: netfilter: fix header example
nft_flowtable.sh is made for bash not sh.
Also give values which not return "RTNETLINK answers: Invalid argument"

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-28 20:11:58 +02:00
Martin KaFai Lau d557ea39a5 bpf: selftests: Add test for different inner map size
This patch tests the inner map size can be different
for reuseport_sockarray but has to be the same for
arraymap.  A new subtest "diff_size" is added for this.

The existing test is moved to a subtest "lookup_update".

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200828011819.1970825-1-kafai@fb.com
2020-08-28 15:41:30 +02:00
Jesper Dangaard Brouer fa4505675e selftests/bpf: Fix massive output from test_maps
When stdout output from the selftests tool 'test_maps' gets redirected
into e.g file or pipe, then the output lines increase a lot (from 21
to 33949 lines).  This is caused by the printf that happens before the
fork() call, and there are user-space buffered printf data that seems
to be duplicated into the forked process.

To fix this fflush() stdout before the fork loop in __run_parallel().

Fixes: 1a97cf1fe5 ("selftests/bpf: speedup test_maps")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/159842985651.1050885.2154399297503372406.stgit@firesoul
2020-08-28 13:58:19 +02:00
Yonghong Song f5493c514c selftests/bpf: Add verifier tests for xor operation
Added some test_verifier bounds check test cases for
xor operations.
  $ ./test_verifier
  ...
  #78/u bounds check for reg = 0, reg xor 1 OK
  #78/p bounds check for reg = 0, reg xor 1 OK
  #79/u bounds check for reg32 = 0, reg32 xor 1 OK
  #79/p bounds check for reg32 = 0, reg32 xor 1 OK
  #80/u bounds check for reg = 2, reg xor 3 OK
  #80/p bounds check for reg = 2, reg xor 3 OK
  #81/u bounds check for reg = any, reg xor 3 OK
  #81/p bounds check for reg = any, reg xor 3 OK
  #82/u bounds check for reg32 = any, reg32 xor 3 OK
  #82/p bounds check for reg32 = any, reg32 xor 3 OK
  #83/u bounds check for reg > 0, reg xor 3 OK
  #83/p bounds check for reg > 0, reg xor 3 OK
  #84/u bounds check for reg32 > 0, reg32 xor 3 OK
  #84/p bounds check for reg32 > 0, reg32 xor 3 OK
  ...

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200825064609.2018077-1-yhs@fb.com
2020-08-26 21:47:32 -07:00
Ido Schimmel 041bc0dce5 selftests: fib_nexthops: Test IPv6 route with group after replacing IPv4 nexthops
Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after replacing the IPv4 nexthops with
IPv6 nexthops.

Output without previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after removing v4 gateways           [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways          [FAIL]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  21
Tests failed:   1

Output with previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after removing v4 gateways           [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after replacing v4 gateways          [ OK ]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  22
Tests failed:   0

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26 16:00:51 -07:00
Ido Schimmel 05290a2773 selftests: fib_nexthops: Test IPv6 route with group after removing IPv4 nexthops
Test that an IPv6 route can not use a nexthop group with mixed IPv4 and
IPv6 nexthops, but can use it after deleting the IPv4 nexthops.

Output without previous patch:

# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways           [FAIL]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  18
Tests failed:   1

Output with previous patch:

bash-5.0# ./fib_nexthops.sh -t ipv6_fcnal_runtime

IPv6 functional runtime
-----------------------
TEST: Route add                                                     [ OK ]
TEST: Route delete                                                  [ OK ]
TEST: Ping with nexthop                                             [ OK ]
TEST: Ping - multipath                                              [ OK ]
TEST: Ping - blackhole                                              [ OK ]
TEST: Ping - blackhole replaced with gateway                        [ OK ]
TEST: Ping - gateway replaced by blackhole                          [ OK ]
TEST: Ping - group with blackhole                                   [ OK ]
TEST: Ping - group blackhole replaced with gateways                 [ OK ]
TEST: IPv6 route with device only nexthop                           [ OK ]
TEST: IPv6 multipath route with nexthop mix - dev only + gw         [ OK ]
TEST: IPv6 route can not have a v4 gateway                          [ OK ]
TEST: Nexthop replace - v6 route, v4 nexthop                        [ OK ]
TEST: Nexthop replace of group entry - v6 route, v4 nexthop         [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route can not have a group with v4 and v6 gateways       [ OK ]
TEST: IPv6 route using a group after deleting v4 gateways           [ OK ]
TEST: Nexthop with default route and rpfilter                       [ OK ]
TEST: Nexthop with multipath default route and rpfilter             [ OK ]

Tests passed:  19
Tests failed:   0

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26 16:00:51 -07:00
Udip Pant 1410620cf2 selftests/bpf: Test for map update access from within EXT programs
This adds further tests to ensure access permissions and restrictions
are applied properly for some map types such as sock-map.
It also adds another negative tests to assert static functions cannot be
replaced. In the 'unreliable' mode it still fails with error 'tracing progs
cannot use bpf_spin_lock yet' with the change in the verifier

Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-5-udippant@fb.com
2020-08-26 12:47:56 -07:00
Udip Pant 50d19736af selftests/bpf: Test for checking return code for the extended prog
This adds test to enforce same check for the return code for the extended prog
as it is enforced for the target program. It asserts failure for a
return code, which is permitted without the patch in this series, while
it is restricted after the application of this patch.

Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-4-udippant@fb.com
2020-08-26 12:47:56 -07:00
Udip Pant 6dc03dc713 selftests/bpf: Add test for freplace program with write access
This adds a selftest that tests the behavior when a freplace target program
attempts to make a write access on a packet. The expectation is that the read or write
access is granted based on the program type of the linked program and
not itself (which is of type, for e.g., BPF_PROG_TYPE_EXT).

This test fails without the associated patch on the verifier.

Signed-off-by: Udip Pant <udippant@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825232003.2877030-3-udippant@fb.com
2020-08-26 12:47:56 -07:00
Colin Ian King 7100ff7c62 selftests/bpf: Fix spelling mistake "scoket" -> "socket"
There is a spelling mistake in a check error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826085907.43095-1-colin.king@canonical.com
2020-08-26 09:19:34 -07:00
Jiri Olsa d83971761f selftests/bpf: Fix open call in trigger_fstat_events
Alexei reported compile breakage on newer systems with
following error:

  In file included from /usr/include/fcntl.h:290:0,
  4814                 from ./test_progs.h:29,
  4815                 from
  .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:3:
  4816In function ‘open’,
  4817    inlined from ‘trigger_fstat_events’ at
  .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:50:10,
  4818    inlined from ‘test_d_path’ at
  .../bpf-next/tools/testing/selftests/bpf/prog_tests/d_path.c:119:6:
  4819/usr/include/x86_64-linux-gnu/bits/fcntl2.h:50:4: error: call to
  ‘__open_missing_mode’ declared with attribute error: open with O_CREAT
  or O_TMPFILE in second argument needs 3 arguments
  4820    __open_missing_mode ();
  4821    ^~~~~~~~~~~~~~~~~~~~~~

We're missing permission bits as 3rd argument
for open call with O_CREAT flag specified.

Fixes: e4d1af4b16 ("selftests/bpf: Add test for d_path helper")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826101845.747617-1-jolsa@kernel.org
2020-08-26 07:20:48 -07:00
Jiri Olsa cd04b04de1 selftests/bpf: Add set test to resolve_btfids
Adding test to for sets resolve_btfids. We're checking that
testing set gets properly resolved and sorted.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-15-jolsa@kernel.org
2020-08-25 15:41:15 -07:00
Jiri Olsa e4d1af4b16 selftests/bpf: Add test for d_path helper
Adding test for d_path helper which is pretty much
copied from Wenbo Zhang's test for bpf_get_fd_path,
which never made it in.

The test is doing fstat/close on several fd types,
and verifies we got the d_path helper working on
kernel probes for vfs_getattr/filp_close functions.

Original-patch-by: Wenbo Zhang <ethercflow@gmail.com>

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-14-jolsa@kernel.org
2020-08-25 15:41:15 -07:00
Jiri Olsa 762f851568 selftests/bpf: Add verifier test for d_path helper
Adding verifier test for attaching tracing program and
calling d_path helper from within and testing that it's
allowed for dentry_open function and denied for 'd_path'
function with appropriate error.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-13-jolsa@kernel.org
2020-08-25 15:41:15 -07:00
KP Singh cd324d7abb bpf: Add selftests for local_storage
inode_local_storage:

* Hook to the file_open and inode_unlink LSM hooks.
* Create and unlink a temporary file.
* Store some information in the inode's bpf_local_storage during
  file_open.
* Verify that this information exists when the file is unlinked.

sk_local_storage:

* Hook to the socket_post_create and socket_bind LSM hooks.
* Open and bind a socket and set the sk_storage in the
  socket_post_create hook using the start_server helper.
* Verify if the information is set in the socket_bind hook.

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-8-kpsingh@chromium.org
2020-08-25 15:00:04 -07:00
KP Singh 1f00d375af bpf: Renames in preparation for bpf_local_storage
A purely mechanical change to split the renaming from the actual
generalization.

Flags/consts:

  SK_STORAGE_CREATE_FLAG_MASK	BPF_LOCAL_STORAGE_CREATE_FLAG_MASK
  BPF_SK_STORAGE_CACHE_SIZE	BPF_LOCAL_STORAGE_CACHE_SIZE
  MAX_VALUE_SIZE		BPF_LOCAL_STORAGE_MAX_VALUE_SIZE

Structs:

  bucket			bpf_local_storage_map_bucket
  bpf_sk_storage_map		bpf_local_storage_map
  bpf_sk_storage_data		bpf_local_storage_data
  bpf_sk_storage_elem		bpf_local_storage_elem
  bpf_sk_storage		bpf_local_storage

The "sk" member in bpf_local_storage is also updated to "owner"
in preparation for changing the type to void * in a subsequent patch.

Functions:

  selem_linked_to_sk			selem_linked_to_storage
  selem_alloc				bpf_selem_alloc
  __selem_unlink_sk			bpf_selem_unlink_storage_nolock
  __selem_link_sk			bpf_selem_link_storage_nolock
  selem_unlink_sk			__bpf_selem_unlink_storage
  sk_storage_update			bpf_local_storage_update
  __sk_storage_lookup			bpf_local_storage_lookup
  bpf_sk_storage_map_free		bpf_local_storage_map_free
  bpf_sk_storage_map_alloc		bpf_local_storage_map_alloc
  bpf_sk_storage_map_alloc_check	bpf_local_storage_map_alloc_check
  bpf_sk_storage_map_check_btf		bpf_local_storage_map_check_btf

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-2-kpsingh@chromium.org
2020-08-25 14:59:58 -07:00
Yonghong Song 0fcdfffe80 selftests/bpf: Enable tc verbose mode for test_sk_assign
Currently test_sk_assign failed verifier with llvm11/llvm12.
During debugging, I found the default verifier output is
truncated like below
  Verifier analysis:

  Skipped 2200 bytes, use 'verb' option for the full verbose log.
  [...]
  off=23,r=34,imm=0) R5=inv0 R6=ctx(id=0,off=0,imm=0) R7=pkt(id=0,off=0,r=34,imm=0) R10=fp0
  80: (0f) r7 += r2
  last_idx 80 first_idx 21
  regs=4 stack=0 before 78: (16) if w3 == 0x11 goto pc+1
when I am using "./test_progs -vv -t assign".

The reason is tc verbose mode is not enabled.

This patched enabled tc verbose mode and the output looks like below
  Verifier analysis:

  0: (bf) r6 = r1
  1: (b4) w0 = 2
  2: (61) r1 = *(u32 *)(r6 +80)
  3: (61) r7 = *(u32 *)(r6 +76)
  4: (bf) r2 = r7
  5: (07) r2 += 14
  6: (2d) if r2 > r1 goto pc+61
   R0_w=inv2 R1_w=pkt_end(id=0,off=0,imm=0) R2_w=pkt(id=0,off=14,r=14,imm=0)
  ...

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200824222807.100200-1-yhs@fb.com
2020-08-24 21:15:13 -07:00
Jesper Dangaard Brouer 2b10af318a selftests/bpf: Fix test_progs-flavor run getting number of tests
Commit 643e7233aa ("selftests/bpf: Test_progs option for getting number of
tests") introduced ability to getting number of tests, which is targeted
towards scripting.  As demonstrate in the commit the number can be use as a
shell variable for further scripting.

The test_progs program support "flavor", which is detected by the binary
have a "-flavor" in the executable name. One example is test_progs-no_alu32,
which load bpf-progs compiled with disabled alu32, located in dir 'no_alu32/'.

The problem is that invoking a "flavor" binary prints to stdout e.g.:
 "Switching to flavor 'no_alu32' subdirectory..."
Thus, intermixing with the number of tests, making it unusable for scripting.

Fix the issue by only printing "flavor" info when verbose -v option is used.

Fixes: 643e7233aa ("selftests/bpf: Test_progs option for getting number of tests")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159827024012.923543.7104106594870150597.stgit@firesoul
2020-08-24 21:09:24 -07:00
Ido Schimmel ffff9c9cb4 selftests: mlxsw: Reduce runtime of tc-police scale test
Currently, the test takes about 626 seconds to complete because of an
inefficient use of the device's TCAM. Reduce the runtime to 202 seconds
by inserting all the flower filters with the same preference and mask,
but with a different key.

In particular, this reduces the deletion of the qdisc (which triggers
the deletion of all the filters) from 66 seconds to 0.2 seconds. This
prevents various netlink requests from user space applications (e.g.,
systemd-networkd) from timing-out because RTNL is not held for too long
anymore.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24 17:36:11 -07:00
Danielle Ratson 24f54c5225 selftests: forwarding: Fix mausezahn delay parameter in mirror_test()
Currently, mausezahn delay parameter in mirror_test() is specified with
'ms' units.

mausezahn versions before 0.6.5 interpret 'ms' as seconds and therefore
the tests that use mirror_test() take a very long time to complete.

Resolve this by specifying 'msec' units.

Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24 17:36:11 -07:00
Ido Schimmel b36cca02dc selftests: mlxsw: Increase burst size for burst test
The current combination of rate and burst size does not adhere to
Spectrum-{2,3} limitation which states that the minimum burst size
should be 40% of the rate.

Increase the burst size in order to honor above mentioned limitation and
avoid intermittent failures of this test case on Spectrum-{2,3}.

Remove the first sub-test case as the variation in number of received
packets is simply too large to reliably test it.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24 17:36:11 -07:00
Ido Schimmel 8e0d8ce4fc selftests: mlxsw: Increase burst size for rate test
The current combination of rate and burst size does not adhere to
Spectrum-{2,3} limitation which states that the minimum burst size
should be 40% of the rate.

Increase the burst size in order to honor above mentioned limitation and
avoid intermittent failures of this test case on Spectrum-{2,3}.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24 17:36:11 -07:00
Ido Schimmel f033ad8d85 selftests: mlxsw: Decrease required rate accuracy
On Spectrum-{2,3} the required accuracy is +/-10%.

Align the test to this requirement so that it can reliably pass on these
platforms.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24 17:36:11 -07:00
Lorenz Bauer 8c3b3d971f selftests: bpf: Fix sockmap update nits
Address review by Yonghong, to bring the new tests in line with the
usual code style.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200824084523.13104-1-lmb@cloudflare.com
2020-08-24 14:51:46 -07:00
Martin KaFai Lau ad2f8eb009 bpf: selftests: Tcp header options
This patch adds tests for the new bpf tcp header option feature.

test_tcp_hdr_options.c:
- It tests header option writing and parsing in 3WHS: regular
  connection establishment, fastopen, and syncookie.
- In syncookie, the passive side's bpf prog is asking the active side
  to resend its bpf header option by specifying a RESEND bit in the
  outgoing SYNACK. handle_active_estab() and write_nodata_opt() has
  some details.
- handle_passive_estab() has comments on fastopen.
- It also has test for header writing and parsing in FIN packet.
- Most of the tests is writing an experimental option 254 with magic 0xeB9F.
- The no_exprm_estab() also tests writing a regular TCP option
  without any magic.

test_misc_tcp_options.c:
- It is an one directional test.  Active side writes option and
  passive side parses option.  The focus is to exercise
  the new helpers and API.
- Testing the new helper: bpf_load_hdr_opt() and bpf_store_hdr_opt().
- Testing the bpf_getsockopt(TCP_BPF_SYN).
- Negative tests for the above helpers.
- Testing the sock_ops->skb_data.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190117.2886749-1-kafai@fb.com
2020-08-24 14:35:00 -07:00
Martin KaFai Lau 8085e1dc1f bpf: selftests: Add fastopen_connect to network_helpers
This patch adds a fastopen_connect() helper which will
be used in a later test.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190111.2886196-1-kafai@fb.com
2020-08-24 14:35:00 -07:00
Shawn Anastasio 24ded46f53 selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
Since SAO support was removed from ISA 3.1, skip the
prot_sao test if PPC_FEATURE2_ARCH_3_1 is set.

Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-4-shawn@anastas.io
2020-08-24 14:12:54 +10:00
Shawn Anastasio 12564485ed Revert "powerpc/64s: Remove PROT_SAO support"
This reverts commit 5c9fa16e8a.

Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.

Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io
2020-08-24 14:12:53 +10:00
David S. Miller 7611cbb900 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-08-23 11:48:27 -07:00
Linus Torvalds 9d045ed1eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
 "Nothing earth shattering here, lots of small fixes (f.e. missing RCU
  protection, bad ref counting, missing memset(), etc.) all over the
  place:

   1) Use get_file_rcu() in task_file iterator, from Yonghong Song.

   2) There are two ways to set remote source MAC addresses in macvlan
      driver, but only one of which validates things properly. Fix this.
      From Alvin Šipraga.

   3) Missing of_node_put() in gianfar probing, from Sumera
      Priyadarsini.

   4) Preserve device wanted feature bits across multiple netlink
      ethtool requests, from Maxim Mikityanskiy.

   5) Fix rcu_sched stall in task and task_file bpf iterators, from
      Yonghong Song.

   6) Avoid reset after device destroy in ena driver, from Shay
      Agroskin.

   7) Missing memset() in netlink policy export reallocation path, from
      Johannes Berg.

   8) Fix info leak in __smc_diag_dump(), from Peilin Ye.

   9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
      Tomlinson.

  10) Fix number of data stream negotiation in SCTP, from David Laight.

  11) Fix double free in connection tracker action module, from Alaa
      Hleihel.

  12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
  net: nexthop: don't allow empty NHA_GROUP
  bpf: Fix two typos in uapi/linux/bpf.h
  net: dsa: b53: check for timeout
  tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
  net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
  net: sctp: Fix negotiation of the number of data streams.
  dt-bindings: net: renesas, ether: Improve schema validation
  gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
  hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
  hv_netvsc: Remove "unlikely" from netvsc_select_queue
  bpf: selftests: global_funcs: Check err_str before strstr
  bpf: xdp: Fix XDP mode when no mode flags specified
  selftests/bpf: Remove test_align leftovers
  tools/resolve_btfids: Fix sections with wrong alignment
  net/smc: Prevent kernel-infoleak in __smc_diag_dump()
  sfc: fix build warnings on 32-bit
  net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
  libbpf: Fix map index used in error message
  net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
  net: atlantic: Use readx_poll_timeout() for large timeout
  ...
2020-08-23 10:52:33 -07:00
Linus Torvalds b2d9e99622 * PAE and PKU bugfixes for x86
* selftests fix for new binutils
 * MMU notifier fix for arm64
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl9ARnoUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroP2YAf/dgLrPm4y4jxm7Aiz3/txqrHEwogT
 ZtvnzqUPb6+vkFrkop8QMOPw7A8NCfkn3/6sWbyUN5ObgOG1pxKyPraeN3ZdsDoR
 KGwv6P0dKgI8B4UuGEMe9GazXv+oOv8+bSUJnE+HZiUHzJKlX4HJbxDwUhvSSatY
 qYCZb/Uzqundh79TYULa7oI1/3F15A2J1zQPe4QgkToH9tsVB8PVfkH5uPJPp64M
 DTm5+qgwwsBULFaAuuo3FTs9f3pWJxn8GOuico1Sm+RnR53mhbUJggUfFzP0rwzZ
 Emevunje5r1rluFs+JWeNtflGH0gI4CLak7jvlOOBjrNb5XJgUSbzLXxkA==
 =Jwic
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:

 - PAE and PKU bugfixes for x86

 - selftests fix for new binutils

 - MMU notifier fix for arm64

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
  KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
  kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
  kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
  KVM: x86: fix access code passed to gva_to_gpa
  selftests: kvm: Use a shorter encoding to clear RAX
2020-08-22 10:03:05 -07:00
Andrii Nakryiko 3ac2e20fba selftests/bpf: BPF object files should depend only on libbpf headers
There is no need to re-build BPF object files if any of the sources of libbpf
change. So record more precise dependency only on libbpf/bpf_*.h headers. This
eliminates unnecessary re-builds.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-2-andriin@fb.com
2020-08-21 15:40:22 -07:00
Lorenz Bauer bb23c0e1c5 selftests: bpf: Test sockmap update from BPF
Add a test which copies a socket from a sockmap into another sockmap
or sockhash. This excercises bpf_map_update_elem support from BPF
context. Compare the socket cookies from source and destination to
ensure that the copy succeeded.

Also check that the verifier rejects map_update from unsafe contexts.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200821102948.21918-7-lmb@cloudflare.com
2020-08-21 15:16:12 -07:00
Andrii Nakryiko dca5612f8e libbpf: Add perf_buffer APIs for better integration with outside epoll loop
Add a set of APIs to perf_buffer manage to allow applications to integrate
perf buffer polling into existing epoll-based infrastructure. One example is
applications using libevent already and wanting to plug perf_buffer polling,
instead of relying on perf_buffer__poll() and waste an extra thread to do it.
But perf_buffer is still extremely useful to set up and consume perf buffer
rings even for such use cases.

So to accomodate such new use cases, add three new APIs:
  - perf_buffer__buffer_cnt() returns number of per-CPU buffers maintained by
    given instance of perf_buffer manager;
  - perf_buffer__buffer_fd() returns FD of perf_event corresponding to
    a specified per-CPU buffer; this FD is then polled independently;
  - perf_buffer__consume_buffer() consumes data from single per-CPU buffer,
    identified by its slot index.

To support a simpler, but less efficient, way to integrate perf_buffer into
external polling logic, also expose underlying epoll FD through
perf_buffer__epoll_fd() API. It will need to be followed by
perf_buffer__poll(), wasting extra syscall, or perf_buffer__consume(), wasting
CPU to iterate buffers with no data. But could be simpler and more convenient
for some cases.

These APIs allow for great flexiblity, but do not sacrifice general usability
of perf_buffer.

Also exercise and check new APIs in perf_buffer selftest.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20200821165927.849538-1-andriin@fb.com
2020-08-21 14:26:55 -07:00
David S. Miller 4af7b32f84 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:

====================
pull-request: bpf 2020-08-21

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 78 insertions(+), 24 deletions(-).

The main changes are:

1) three fixes in BPF task iterator logic, from Yonghong.

2) fix for compressed dwarf sections in vmlinux, from Jiri.

3) fix xdp attach regression, from Andrii.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-21 12:54:50 -07:00