Commit Graph

255010 Commits

Author SHA1 Message Date
Hans Verkuil 9bf0ef060e [media] tuner-core: fix tuner_resume: use t->mode instead of t->type
set_mode is called with t->type, which is the tuner type. Instead, use
t->mode which is the actual tuner mode (i.e. radio vs tv).

Cc: stable@kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07 15:00:57 -03:00
Hans Verkuil 4e4a31fb95 [media] tuner-core: fix s_std and s_tuner
Both s_std and s_tuner are broken because set_mode_freq is called before the
new std (for s_std) and audmode (for s_tuner) are set.

This patch splits set_mode_freq in a set_mode and a set_freq and in s_std/s_tuner
first calls set_mode, and if that returns 0 (i.e. the mode is supported)
then they set t->std/t->audmode and call set_freq.

This fixes a bug where changing std or audmode would actually change it to
the previous value.

Discovered while testing analog TV standards for cx18 with a tda18271 tuner.

Cc: stable@kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-07 15:00:10 -03:00
Kuninori Morimoto bd7fdbcaa2 ASoC: ak4642: fixup snd_soc_update_bits mask for PW_MGMT2
mask didn't cover update-data

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
2011-07-07 09:46:06 -07:00
Konrad Rzeszutek Wilk ee339fe63a xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.
Previously we would check for acpi_sci_override_gsi == gsi every time
a PCI device was enabled. That works during early bootup, but later
on it could lead to triggering unnecessarily the acpi_gsi_to_irq(..) lookup.
The reason is that acpi_sci_override_gsi was declared in __initdata and
after early bootup could contain bogus values.

This patch moves the check for acpi_sci_override_gsi to the
site where the ACPI SCI is preset.

CC: stable@kernel.org
Reported-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Tested-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
[http://lists.xensource.com/archives/html/xen-devel/2011-07/msg00154.html]
Suggested-by:  Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-07 12:19:08 -04:00
Axel Lin 60cfa098dc platform-drivers-x86: set backlight type to BACKLIGHT_PLATFORM
Some newly added drivers do not set backlight type, as a result
/sys/class/backlight/<backlight>/type shows incorrect backlight type.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Yin Kangkai <kangkai.yin@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07 11:27:17 -04:00
Henrique de Moraes Holschuh a50245af78 thinkpad-acpi: handle HKEY 0x4010, 0x4011 events
Handle events 0x4010 and 0x4011 so that we do not pester users about them.

These events report when the thinkpad is docked/undocked to a native
hotplug dock (i.e. one that does not need ACPI handling, nor is represented
in the ACPI device tree).  Such docks are based on USB 2.0/3.0, and also
work as port replicators.

We really want a proper dock class to report these, or at least new input
EV_SW events.  Since it is not clear which one to use yet, keep reporting
them as vendor-specific ThinkPad events.

WARNING: As defined by the thinkpad-acpi sysfs ABI rules of engagement, the
vendor-specific events will be REMOVED as soon as generic events are made
available (duplicate events are a big problem), with an appropriate update
to the thinkpad-acpi sysfs/event ABI versioning.  Userspace is already
prepared to provide easy backwards compatibility for such changes when
convenient to the distro (see acpi-fakekey).

* Event 0x4010: docking to hotplug dock/port replicator
* Event 0x4011: undocking from hotplug dock/port replicator

Typical usecase would be to trigger display reconfiguration.

Reports mention T410, T510, and series 3 docks/port replicators.  Special
thanks to Robert de Rooy for his extensive report and analysis of the
situation.

http://www.thinkwiki.org/wiki/ThinkPad_Port_Replicator_Series_3
http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Series_3
http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3
http://www.thinkwiki.org/wiki/ThinkPad_Mini_Dock_Plus_Series_3_for_Mobile_Workstations
http://lenovoblogs.com/insidethebox/?p=290

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Claudius Hubig <claudiushubig@chubig.net>
Reported-by: Doctor Bill <docbill@gmail.com>
Reported-by: Korte Noack <gbk.noack@gmx.de>
Reported-by: Robert de Rooy <robert.de.rooy@gmail.com>
Reported-by: Sebastian Will <swill@csail.mit.edu>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07 10:39:05 -04:00
Andre Bartke 96b269c1b0 drivers/platform/x86: Fix memory leak
data is not freed in the error case of
compal_probe().

Signed-off-by: Andre Bartke <andre.bartke@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07 10:39:03 -04:00
Henrique de Moraes Holschuh 2d43f671c8 thinkpad-acpi: handle some new HKEY 0x60xx events
Handle some user interface events from the newer Lenovo models.  We are likely
to do something smart with these events in the future, for now, hide the ones
we are already certain about from the user and userspace both.

* Events 0x6000 and 0x6005 are key-related.  0x6005 is not properly identified
  yet.  Ignore these events, and do not report them.

* Event 0x6040 has not been properly identified yet, and we don't know if it
  is important (looks like it isn't, but still...).  Keep reporting it.

* Change the message the driver outputs on unknown 0x6xxx events, as all
  recent events are not related to thermal alarms.  Degrade log level from
  ALERT to WARNING.

Thanks to all users who reported these events or asked about them in a number
of mailing lists.  Your help is highly appreciated, even if I did took a lot of
time to act on them.  For that I apologise.

I will list those that identified the reasons for the events as "reported-by",
and I apologise in advance if I leave anyone out: it was not done on purpose, I
made the mistake of not properly tagging all event report emails separately,
and might have missed some.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Markus Malkusch <markus@malkusch.de>
Reported-by: Peter Giles <g1l3sp@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07 10:39:00 -04:00
Lee, Chun-Yi ae821c1b2f acer-wmi: fix bitwise bug when set device state
Fix a bitwise bug that was found by Joern Heissler, it must be OR
but not AND when we query current device state.

Acked-by: Joern Heissler <linux-acpi@joern.heissler.de>
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07 10:38:58 -04:00
Seth Forshee 92530664bb acer-wmi: Only update rfkill status for associated hotkey events
acer-wmi is indiscriminately using the device state from hotkey
events to update the various rfkill states. On the Aspire 1830 this
can result in a soft block on the wlan when the touchpad hotkey is
pressed, as it is reporting a non-zero device state that does not
reflect the wireless status. To fix this, only update rfkill states
when a wlan or bluetooth hotkey is pressed.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-07-07 10:38:56 -04:00
Vitaly Kuzmichev 90c5ffe592 ARM: 6994/1: smp_twd: Fix typo in 'twd_timer_rate' printing
To get hundredths of MHz the rate needs to be divided by 10'000.
Here is an example:
 twd_timer_rate = 123456789
 Before the patch:
    twd_timer_rate / 1000000 = 123
    (twd_timer_rate / 1000000) % 100 = 23
    Result: 123.23MHz.
 After being fixed:
    twd_timer_rate / 1000000 = 123
    (twd_timer_rate / 10000) % 100 = 45
    Result: 123.45MHz.

Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-07 15:00:12 +01:00
Wei Yongjun 949123016a sctp: fix missing send up SCTP_SENDER_DRY_EVENT when subscribe it
We forgot to send up SCTP_SENDER_DRY_EVENT notification when
user app subscribes to this event, and there is no data to be
sent or retransmit.

This is required by the Socket API and used by the DTLS/SCTP
implementation.

Reported-by: Michael Tüxen <Michael.Tuexen@lurchi.franken.de>
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Tested-by: Robin Seggelmann <seggelmann@fh-muenster.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 04:10:26 -07:00
Matthew Garrett f70e957cda x86: Don't use the EFI reboot method by default
Testing suggests that at least some Lenovos and some Intels will
fail to reboot via EFI, attempting to jump to an unmapped
physical address. In the long run we could handle this by
providing a page table with a 1:1 mapping of physical addresses,
but for now it's probably just easier to assume that ACPI or
legacy methods will be present and reboot via those.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/1309985557-15350-1-git-send-email-mjg@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-07 11:35:05 +02:00
Ben Skeggs d61a06862b drm/kms: allow drm_mode_group with no objects
Sometimes we could be controlling a device (such as an NVIDIA Tesla) that
has no crtcs/encoders/connectors.

One could argue that the driver should unset DRIVER_MODESET in this case,
but that changes a whole heap of the DRM's other behaviours, and it's much
easier to just be a modesetting driver without any outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:49:00 +10:00
Jerome Glisse ccd6895d40 drm/radeon/kms: free ib pool on module unloading
ib pool weren't free for various newer asic on module unload.
This doesn't cause much arm but still could be candidate for
stable.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
cc: stable@kernel.org
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:48:27 +10:00
Alex Deucher 37cba6c6f4 drm/radeon/kms: fix typo in evergreen disp int status register
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:47:44 +10:00
Alex Deucher fcb857abc4 drm/radeon/kms: fix typo in IH_CNTL swap bitfield
Only affects BE systems.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-07 17:47:12 +10:00
Eric Dumazet f03d78db65 net: refine {udp|tcp|sctp}_mem limits
Current tcp/udp/sctp global memory limits are not taking into account
hugepages allocations, and allow 50% of ram to be used by buffers of a
single protocol [ not counting space used by sockets / inodes ...]

Lets use nr_free_buffer_pages() and allow a default of 1/8 of kernel ram
per protocol, and a minimum of 128 pages.
Heavy duty machines sysadmins probably need to tweak limits anyway.


References: https://bugzilla.stlinux.com/show_bug.cgi?id=38032
Reported-by: starlight <starlight@binnacle.cx>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-07 00:27:05 -07:00
Takashi Iwai 9c7a083d94 ALSA: hda - Change all ADCs for dual-adc switching mode for Realtek
When the dual-adc switching mode is active in Realtek auto-parser,
we need to couple all ADCs as a single capture-volume.  Currently, the
volume control changes only the first ADC, thus others may remain silent.
This patch fixes the problem.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07 09:25:54 +02:00
Shreyas Bhatewara eebb02b1f0 vmxnet3: round down # of queues to power of two
vmxnet3 device supports only power-of-two number of queues. The driver
therefore needs to check this and rounds down the number of queues to the
nearest power of two.

Signed-off-by: Yong Wang <yongwang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
2011-07-07 00:25:52 -07:00
Kees Cook 7a3136666b x86, suspend: Restore MISC_ENABLE MSR in realmode wakeup
Some BIOSes will reset the Intel MISC_ENABLE MSR (specifically the
XD_DISABLE bit) when resuming from S3, which can interact poorly with
ebba638ae7. In 32bit PAE mode, this can
lead to a fault when EFER is restored by the kernel wakeup routines,
due to it setting the NX bit for a CPU that (thanks to the BIOS reset)
now incorrectly thinks it lacks the NX feature. (64bit is not affected
because it uses a common CPU bring-up that specifically handles the
XD_DISABLE bit.)

The need for MISC_ENABLE being restored so early is specific to the S3
resume path. Normally, MISC_ENABLE is saved in save_processor_state(),
but this happens after the resume header is created, so just reproduce
the logic here. (acpi_suspend_lowlevel() creates the header, calls
do_suspend_lowlevel, which calls save_processor_state(), so the saved
processor context isn't available during resume header creation.)

[ hpa: Consider for stable if OK in mainline ]

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Link: http://lkml.kernel.org/r/20110707011034.GA8523@outflux.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@kernel.org> 2.6.38+
2011-07-06 20:09:34 -07:00
Linus Torvalds 4dd1b49c6d Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: add missing breaks in tps65910_gpio_init
2011-07-06 18:36:53 -07:00
Miao Xie 149e2d76b4 btrfs: fix oops when doing space balance
We need to make sure the data relocation inode doesn't go through
the delayed metadata updates, otherwise we get an oops during balance:

kernel BUG at fs/btrfs/relocation.c:4303!
[SNIP]
Call Trace:
 [<ffffffffa03143fd>] ? update_ref_for_cow+0x22d/0x330 [btrfs]
 [<ffffffffa0314951>] __btrfs_cow_block+0x451/0x5e0 [btrfs]
 [<ffffffffa031355d>] ? read_block_for_search+0x14d/0x4d0 [btrfs]
 [<ffffffffa0314beb>] btrfs_cow_block+0x10b/0x240 [btrfs]
 [<ffffffffa031acae>] btrfs_search_slot+0x49e/0x7a0 [btrfs]
 [<ffffffffa032d8af>] btrfs_lookup_inode+0x2f/0xa0 [btrfs]
 [<ffffffff8147bf0e>] ? mutex_lock+0x1e/0x50
 [<ffffffffa0380cf1>] btrfs_update_delayed_inode+0x71/0x160 [btrfs]
 [<ffffffffa037ff27>] ? __btrfs_release_delayed_node+0x67/0x190 [btrfs]
 [<ffffffffa0381cf8>] btrfs_run_delayed_items+0xe8/0x120 [btrfs]
 [<ffffffffa03365e0>] btrfs_commit_transaction+0x250/0x850 [btrfs]
 [<ffffffff810f91d9>] ? find_get_pages+0x39/0x130
 [<ffffffffa0336cd5>] ? join_transaction+0x25/0x250 [btrfs]
 [<ffffffff81081de0>] ? wake_up_bit+0x40/0x40
 [<ffffffffa03785fa>] prepare_to_relocate+0xda/0xf0 [btrfs]
 [<ffffffffa037f2bb>] relocate_block_group+0x4b/0x620 [btrfs]
 [<ffffffffa0334cf5>] ? btrfs_clean_old_snapshots+0x35/0x150 [btrfs]
 [<ffffffffa037fa43>] btrfs_relocate_block_group+0x1b3/0x2e0 [btrfs]
 [<ffffffffa0368ec0>] ? btrfs_tree_unlock+0x50/0x50 [btrfs]
 [<ffffffffa035e39b>] btrfs_relocate_chunk+0x8b/0x670 [btrfs]
 [<ffffffffa031303d>] ? btrfs_set_path_blocking+0x3d/0x50 [btrfs]
 [<ffffffffa03577d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs]
 [<ffffffffa031bea1>] ? btrfs_previous_item+0xb1/0x150 [btrfs]
 [<ffffffffa03577d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs]
 [<ffffffffa035f5aa>] btrfs_balance+0x21a/0x2b0 [btrfs]
 [<ffffffffa0368898>] btrfs_ioctl+0x798/0xd20 [btrfs]
 [<ffffffff8111e358>] ? handle_mm_fault+0x148/0x270
 [<ffffffff814809e8>] ? do_page_fault+0x1d8/0x4b0
 [<ffffffff81160d6a>] do_vfs_ioctl+0x9a/0x540
 [<ffffffff811612b1>] sys_ioctl+0xa1/0xb0
 [<ffffffff81484ec2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP  [<ffffffffa037c1cc>] btrfs_reloc_cow_block+0x22c/0x270 [btrfs]

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-07-06 18:51:53 -04:00
Josef Bacik 508794eb5e Btrfs: don't panic if we get an error while balancing V2
A user reported an error where if we try to balance an fs after a device has
been removed it will blow up.  This is because we get an EIO back and this is
where BUG_ON(ret) bites us in the ass.  To fix we just exit.  Thanks,

Reported-by: Anand Jain <Anand.Jain@oracle.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-07-06 18:46:43 -04:00
David Sterba 0942caa373 btrfs: add missing options displayed in mount output
There are three missed mount options settable by user which are not
currently displayed in mount output.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-07-06 18:46:43 -04:00
Dave Chinner 1316d4da3f xfs: unpin stale inodes directly in IOP_COMMITTED
When inodes are marked stale in a transaction, they are treated
specially when the inode log item is being inserted into the AIL.
It tries to avoid moving the log item forward in the AIL due to a
race condition with the writing the underlying buffer back to disk.
The was "fixed" in commit de25c18 ("xfs: avoid moving stale inodes
in the AIL").

To avoid moving the item forward, we return a LSN smaller than the
commit_lsn of the completing transaction, thereby trying to trick
the commit code into not moving the inode forward at all. I'm not
sure this ever worked as intended - it assumes the inode is already
in the AIL, but I don't think the returned LSN would have been small
enough to prevent moving the inode. It appears that the reason it
worked is that the lower LSN of the inodes meant they were inserted
into the AIL and flushed before the inode buffer (which was moved to
the commit_lsn of the transaction).

The big problem is that with delayed logging, the returning of the
different LSN means insertion takes the slow, non-bulk path.  Worse
yet is that insertion is to a position -before- the commit_lsn so it
is doing a AIL traversal on every insertion, and has to walk over
all the items that have already been inserted into the AIL. It's
expensive.

To compound the matter further, with delayed logging inodes are
likely to go from clean to stale in a single checkpoint, which means
they aren't even in the AIL at all when we come across them at AIL
insertion time. Hence these were all getting inserted into the AIL
when they simply do not need to be as inodes marked XFS_ISTALE are
never written back.

Transactional/recovery integrity is maintained in this case by the
other items in the unlink transaction that were modified (e.g. the
AGI btree blocks) and committed in the same checkpoint.

So to fix this, simply unpin the stale inodes directly in
xfs_inode_item_committed() and return -1 to indicate that the AIL
insertion code does not need to do any further processing of these
inodes.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-06 15:44:40 -05:00
Andrea Righi 9b61fc4cf3 Documentation: fix cgroup blkio throttle filenames
All the blkio.throttle.* file names are incorrectly reported without
".throttle" in the documentation. Fix it.

Signed-off-by: Andrea Righi <andrea@betterlinux.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-06 13:17:51 -07:00
Jesper Juhl 316b379988 Documentation: update CodingStyle memory allocators
The list of available general purpose memory allocators in
Documentation/CodingStyle chapter 14 is incomplete. This patch adds
the missing vzalloc() to the list.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-06 13:17:51 -07:00
Randy Dunlap 0dcb6d737c MAINTAINERS: move kernel-doc patches location
Move location of quilt series for kernel-doc patches.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-06 13:17:51 -07:00
Jeff Layton f9e59bcba2 cifs: have cifs_cleanup_volume_info not take a double pointer
...as that makes for a cumbersome interface. Make it take a regular
smb_vol pointer and rely on the caller to zero it out if needed.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-07-06 20:03:05 +00:00
Jeff Layton b2a0fa1520 cifs: fix build_unc_path_to_root to account for a prefixpath
Regression introduced by commit f87d39d951.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-07-06 20:03:05 +00:00
Jeff Layton 677d8537d8 cifs: remove bogus call to cifs_cleanup_volume_info
This call to cifs_cleanup_volume_info is clearly wrong. As soon as it's
called the following call to cifs_get_tcp_session will oops as the
volume_info pointer will then be NULL.

The caller of cifs_mount should clean up this data since it passed it
in. There's no need for us to call this here.

Regression introduced by commit 724d9f1cfb.

Reported-by: Adam Williamson <awilliam@redhat.com>
Cc: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-07-06 20:03:04 +00:00
Will Deacon 38a8914f9a ARM: 6987/1: l2x0: fix disabling function to avoid deadlock
The l2x0_disable function attempts to writel with the l2x0_lock held.
This results in deadlock when the writel contains an outer_sync call
for the platform since the l2x0_lock is already held by the disable
function. A further problem is that disabling the L2 without flushing it
first can lead to the spin_lock operation becoming visible after the
spin_unlock, causing any subsequent L2 maintenance to deadlock.

This patch replaces the writel with a call to writel_relaxed in the
disabling code and adds a flush before disabling in the control
register, preventing livelock from occurring.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06 20:48:08 +01:00
Petr Štetiar 186dcaa448 ARM: 6966/1: ep93xx: fix inverted RTS/DTR signals on uart1
It was discovered by Roberto Bergo, that RTS/DTR signals are inverted after
the boot, because it was causing him problems with hardware controlled modem
connected on ttyAM0. Todd Valentic came with this patch for the issue.

Discussion: http://tech.groups.yahoo.com/group/ts-7000/message/20259

Comments from Petr Štetiar:

 Sorry, but forget to add Acked-by[1]:

 1. https://patchwork.kernel.org/patch/873052/

Cc: Ryan Mallon <ryan@bluewatersys.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Todd Valentic <todd.valentic@sri.com>
Tested-by: Roberto Bergo <roberto.bergo@robson.it>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06 20:46:36 +01:00
Linus Walleij 757df746fc ARM: 6980/1: mmci: use StartBitErr to detect bad connections
Stresstesting insert/remove of SD-cards can trigger
a StartBitErr. This made the driver to hang in forever
waiting for a non ocurring data timeout.

This bit and interrupt is documented in the original
PL180 TRM, just never implemented until now.

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-by: Linus Walleij <linus.walleij@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06 20:46:04 +01:00
Wolfram Sang 2eb5af44b1 ARM: 6979/1: mach-vt8500: add forgotten irq_data conversion
This platform has not been converted to 'struct irq_data' when the big
pile was done and fails to compile nowadays. Tested on a JayPC-Tablet.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06 20:46:04 +01:00
Linus Torvalds de3796e77a Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (46 commits)
  [media] rc: call input_sync after scancode reports
  [media] imon: allow either proto on unknown 0xffdc
  [media] imon: auto-config ffdc 7e device
  [media] saa7134: fix raw IR timeout value
  [media] rc: fix ghost keypresses with certain hw
  [media] [staging] lirc_serial: allocate irq at init time
  [media] lirc_zilog: fix spinning rx thread
  [media] keymaps: fix table for pinnacle pctv hd devices
  [media] ite-cir: 8709 needs to use pnp resource 2
  [media] V4L: mx1-camera: fix uninitialized variable
  [media] omap_vout: Added check in reqbuf & mmap for buf_size allocation
  [media] OMAP_VOUT: Change hardcoded device node number to -1
  [media] OMAP_VOUTLIB: Fix wrong resizer calculation
  [media] uvcvideo: Disable the queue when failing to start
  [media] uvcvideo: Remove buffers from the queues when freeing
  [media] uvcvideo: Ignore entities for terminals with no supported format
  [media] v4l: Don't access media entity after is has been destroyed
  [media] media: omap3isp: fix a potential NULL deref
  [media] media: vb2: fix allocation failure check
  [media] media: vb2: reset queued_count value during queue reinitialization
  ...

Fix up trivial conflict in MAINTAINERS as per Mauro
2011-07-06 12:16:49 -07:00
Davidlohr Bueso bcb65a797e FDPIC: Fix memory leak
The shdr4extnum variable isn't being freed in the cleanup process of
elf_fdpic_core_dump().

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-06 12:15:16 -07:00
Rafael J. Wysocki 4d4cf23cdd PM / Hibernate: Fix free_unnecessary_pages()
There is a bug in free_unnecessary_pages() that causes it to
attempt to free too many pages in some cases, which triggers the
BUG_ON() in memory_bm_clear_bit() for copy_bm.  Namely, if
count_data_pages() is initially greater than alloc_normal, we get
to_free_normal equal to 0 and "save" greater from 0.  In that case,
if the sum of "save" and count_highmem_pages() is greater than
alloc_highmem, we subtract a positive number from to_free_normal.
Hence, since to_free_normal was 0 before the subtraction and is
an unsigned int, the result is converted to a huge positive number
that is used as the number of pages to free.

Fix this bug by checking if to_free_normal is actually greater
than or equal to the number we're going to subtract from it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
2011-07-06 20:15:23 +02:00
Ram Pai 23c570a674 resource: ability to resize an allocated resource
Provides the ability to resize a resource that is already allocated.
This functionality is put in place to support reallocation needs of
pci resources.

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-06 10:54:08 -07:00
Miklos Szeredi a51cb91d81 fs: fix lock initialization
locks_alloc_lock() assumed that the allocated struct file_lock is
already initialized to zero members.  This is only true for the first
allocation of the structure, after reuse some of the members will have
random values.

This will for example result in passing random fl_start values to
userspace in fuse for FL_FLOCK locks, which is an information leak at
best.

Fix by reinitializing those members which may be non-zero after freeing.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-06 10:41:13 -07:00
Sylwester Nawrocki 5f27275edb ARM: EXYNOS4: Set appropriate I2C device variant
Set up a correct I2C bus controller variant name for Exynos4.
Without this change the I2C bus driver fails to acquire its
clocks.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06 16:04:09 +09:00
Kukjin Kim d60c98c26a Merge branch 'for-spi' into s5p-fixes-for-linus 2011-07-06 15:46:41 +09:00
Yoshihiro Shimoda 2e98e7974d net: sh_eth: fix the parameter for the ETHER of SH7757
If the driver didn't set this parameter on the ETHER, the CPU will
encounter the "data address error" exception.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 23:41:17 -07:00
Yoshihiro Shimoda 91a5615203 net: sh_eth: fix cannot work half-duplex mode
When link was down, the bit of DM in ECMR was always set.
So, we could not use half-duplex mode on the controller.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 23:41:17 -07:00
Padmavathi Venna 8fa9dd04b7 ARM: S5PC100: Fix for compilation error
S5PC100 Compilation fails without this patch

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06 15:37:08 +09:00
Padmavathi Venna 3075741417 spi/s3c64xx: Bug fix for SPI with different FIFO level
The existing macro fails for following scenarios.
1) S5P64X0 channel 1
2) S5PV210 channel 1

The FIFO data level supported in the above SoCs either 64 or
256 bytes depending on the channel. Because of this the TX_DONE
is the 25 bit in the status register.

The existing macro works for the following scenarios
1) S3C6410 all channels
2) S5PC100 all channels

The FIFO data level supported in the above SoCs 64 bytes
on all the channels. Because of this the TX_DONE is the 21 bit
in the status register.

So when we use the existing macro for the non-working SoCs
it is not anding with the TX_DONE bit for transmission status check.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06 15:03:08 +09:00
Padmavathi Venna 8918034dfb ARM: SAMSUNG: Add tx_st_done variable
tx_st_done is required for checking the transmission status of SPI
channels with different fifo levels

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06 15:03:08 +09:00
Axel Lin 58956ba23e gpio: tps65910: add missing breaks in tps65910_gpio_init
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-05 23:17:08 -06:00
Linus Torvalds a2fa83faf4 Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fix regression occurring during device removal
  USB: fsl_udc_core: fix build breakage when building for ARM arch
2011-07-05 20:57:45 -07:00