Commit Graph

159 Commits

Author SHA1 Message Date
Eric Dumazet 1c0d32fde5 net_sched: gen_estimator: complete rewrite of rate estimators
1) Old code was hard to maintain, due to complex lock chains.
   (We probably will be able to remove some kfree_rcu() in callers)

2) Using a single timer to update all estimators does not scale.

3) Code was buggy on 32bit kernel (WRITE_ONCE() on 64bit quantity
   is not supposed to work well)

In this rewrite :

- I removed the RB tree that had to be scanned in
  gen_estimator_active(). qdisc dumps should be much faster.

- Each estimator has its own timer.

- Estimations are maintained in net_rate_estimator structure,
  instead of dirtying the qdisc. Minor, but part of the simplification.

- Reading the estimator uses RCU and a seqcount to provide proper
  support for 32bit kernels.

- We reduce memory need when estimators are not used, since
  we store a pointer, instead of the bytes/packets counters.

- xt_rateest_mt() no longer has to grab a spinlock.
  (In the future, xt_rateest_tg() could be switched to per cpu counters)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05 15:21:59 -05:00
Eric Dumazet 73e42ff72a sch_htb: do not report fake rate estimators
When I prepared commit d250a5f90e ("pkt_sched: gen_estimator: Dont
report fake rate estimators"), htb still had an implicit rate estimator
for all its classes.

Then later, I made this rate estimator optional in commit 64153ce0a7
("net_sched: htb: do not setup default rate estimators"), but I forgot
to update htb use of gnet_stats_copy_rate_est()

After this patch, "tc -s qdisc ..." no longer report fake rate
estimators for HTB classes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 17:13:49 -04:00
Florian Westphal 48da34b7a7 sched: add and use qdisc_skb_head helpers
This change replaces sk_buff_head struct in Qdiscs with new qdisc_skb_head.

Its similar to the skb_buff_head api, but does not use skb->prev pointers.

Qdiscs will commonly enqueue at the tail of a list and dequeue at head.
While skb_buff_head works fine for this, enqueue/dequeue needs to also
adjust the prev pointer of next element.

The ->prev pointer is not required for qdiscs so we can just leave
it undefined and avoid one cacheline write access for en/dequeue.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 01:47:18 -04:00
David S. Miller de0ba9a0d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just several instances of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24 00:53:32 -04:00
Konstantin Khlebnikov 0564bf0afa net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int
In kernel HTB keeps tokens in signed 64-bit in nanoseconds. In netlink
protocol these values are converted into pshed ticks (64ns for now) and
truncated to 32-bit. In struct tc_htb_xstats fields "tokens" and "ctokens"
are declared as unsigned 32-bit but they could be negative thus tool 'tc'
prints them as signed. Big values loose higher bits and/or become negative.

This patch clamps tokens in xstat into range from INT_MIN to INT_MAX.
In this way it's easier to understand what's going on here.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-18 22:44:31 -07:00
David S. Miller ee58b57100 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 05:03:36 -04:00
Eric Dumazet 338ed9b4de net_sched: sch_htb: export class backlog in dumps
We already get child qdisc qlen, we also can get its backlog
so that class dumps can report it.

Also replace qstats by a single drop counter, but move it in
a separate cache line so that drops do not dirty useful cache lines.

Tested:

$ tc -s cl sh dev eth0
class htb 1:1 root leaf 3: prio 0 rate 1Gbit ceil 1Gbit burst 500000b cburst 500000b
 Sent 2183346912 bytes 9021815 pkt (dropped 2340774, overlimits 0 requeues 0)
 rate 1001Mbit 517543pps backlog 120758b 499p requeues 0
 lended: 9021770 borrowed: 0 giants: 0
 tokens: 9 ctokens: 9

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25 12:19:35 -04:00
Eric Dumazet 520ac30f45 net_sched: drop packets after root qdisc lock is released
Qdisc performance suffers when packets are dropped at enqueue()
time because drops (kfree_skb()) are done while qdisc lock is held,
delaying a dequeue() draining the queue.

Nominal throughput can be reduced by 50 % when this happens,
at a time we would like the dequeue() to proceed as fast as possible.

Even FQ is vulnerable to this problem, while one of FQ goals was
to provide some flow isolation.

This patch adds a 'struct sk_buff **to_free' parameter to all
qdisc->enqueue(), and in qdisc_drop() helper.

I measured a performance increase of up to 12 %, but this patch
is a prereq so that future batches in enqueue() can fly.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25 12:19:35 -04:00
Florian Westphal 0ee13627f9 htb: call qdisc_root with rcu read lock held
saw a debug splat:
net/include/net/sch_generic.h:287 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
 2 locks held by kworker/2:1/710:
  #0:  ("events"){.+.+.+}, at: [<ffffffff8106ca1d>]
  #1:  ((&q->work)){+.+...}, at: [<ffffffff8106ca1d>] process_one_work+0x14d/0x690
Workqueue: events htb_work_func
Call Trace:
 [<ffffffff812dc763>] dump_stack+0x85/0xc2
 [<ffffffff8109fee7>] lockdep_rcu_suspicious+0xe7/0x120
 [<ffffffff814ced47>] htb_work_func+0x67/0x70

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:42:46 -07:00
Eric Dumazet a5a9f5346f net_sched: sch_htb: defer skb freeing
Both htb_reset() and htb_destroy() can use __qdisc_reset_queue()
instead of __skb_queue_purge() to defer skb freeing of internal
queues.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:35 -07:00
Eric Dumazet 45f50bed1d net_sched: remove generic throttled management
__QDISC_STATE_THROTTLED bit manipulation is rather expensive
for HTB and few others.

I already removed it for sch_fq in commit f2600cf02b
("net: sched: avoid costly atomic operation in fq_dequeue()")
and so far nobody complained.

When one ore more packets are stuck in one or more throttled
HTB class, a htb dequeue() performs two atomic operations
to clear/set __QDISC_STATE_THROTTLED bit, while root qdisc
lock is held.

Removing this pair of atomic operations bring me a 8 % performance
increase on 200 TCP_RR tests, in presence of throttled classes.

This patch has no side effect, since nothing actually uses
disc_is_throttled() anymore.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 23:58:21 -07:00
Florian Westphal a09ceb0e08 sched: remove qdisc->drop
after removal of TCA_CBQ_OVL_STRATEGY from cbq scheduler, there are no
more callers of ->drop() outside of other ->drop functions, i.e.
nothing calls them.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 23:58:52 -07:00
Eric Dumazet edb09eb17e net: sched: do not acquire qdisc spinlock in qdisc/class stats dump
Large tc dumps (tc -s {qdisc|class} sh dev ethX) done by Google BwE host
agent [1] are problematic at scale :

For each qdisc/class found in the dump, we currently lock the root qdisc
spinlock in order to get stats. Sampling stats every 5 seconds from
thousands of HTB classes is a challenge when the root qdisc spinlock is
under high pressure. Not only the dumps take time, they also slow
down the fast path (queue/dequeue packets) by 10 % to 20 % in some cases.

An audit of existing qdiscs showed that sch_fq_codel is the only qdisc
that might need the qdisc lock in fq_codel_dump_stats() and
fq_codel_dump_class_stats()

In v2 of this patch, I now use the Qdisc running seqcount to provide
consistent reads of packets/bytes counters, regardless of 32/64 bit arches.

I also changed rate estimators to use the same infrastructure
so that they no longer need to lock root qdisc lock.

[1]
http://static.googleusercontent.com/media/research.google.com/en//pubs/archive/43838.pdf

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kevin Athey <kda@google.com>
Cc: Xiaotian Pei <xiaotian@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 16:37:14 -07:00
Eric Dumazet a9efad8b24 net_sched: avoid too many hrtimer_start() calls
I found a serious performance bug in packet schedulers using hrtimers.

sch_htb and sch_fq are definitely impacted by this problem.

We constantly rearm high resolution timers if some packets are throttled
in one (or more) class, and other packets are flying through qdisc on
another (non throttled) class.

hrtimer_start() does not have the mod_timer() trick of doing nothing if
expires value does not change :

	if (timer_pending(timer) &&
            timer->expires == expires)
                return 1;

This issue is particularly visible when multiple cpus can queue/dequeue
packets on the same qdisc, as hrtimer code has to lock a remote base.

I used following fix :

1) Change htb to use qdisc_watchdog_schedule_ns() instead of open-coding
it.

2) Cache watchdog prior expiration. hrtimer might provide this, but I
prefer to not rely on some hrtimer internal.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-24 14:49:14 -07:00
Nicolas Dichtel 2a51c1e8ec sched: use nla_put_u64_64bit()
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25 15:09:09 -04:00
WANG Cong 431e3a8e36 sch_htb: update backlog as well
We saw qlen!=0 but backlog==0 on our production machine:

qdisc htb 1: dev eth0 root refcnt 2 r2q 10 default 1 direct_packets_stat 0 ver 3.17
 Sent 172680457356 bytes 222469449 pkt (dropped 0, overlimits 123575834 requeues 0)
 backlog 0b 72p requeues 0

The problem is we only count qlen for HTB qdisc but not backlog.
We need to update backlog too when we update qlen, so that we
can at least know the average packet length.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29 17:02:33 -05:00
WANG Cong 2ccccf5fb4 net_sched: update hierarchical backlog too
When the bottom qdisc decides to, for example, drop some packet,
it calls qdisc_tree_decrease_qlen() to update the queue length
for all its ancestors, we need to update the backlog too to
keep the stats on root qdisc accurate.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29 17:02:33 -05:00
WANG Cong 86a7996cc8 net_sched: introduce qdisc_replace() helper
Remove nearly duplicated code and prepare for the following patch.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29 17:02:33 -05:00
Daniel Borkmann 3b3ae88026 net: sched: consolidate tc_classify{,_compat}
For classifiers getting invoked via tc_classify(), we always need an
extra function call into tc_classify_compat(), as both are being
exported as symbols and tc_classify() itself doesn't do much except
handling of reclassifications when tp->classify() returned with
TC_ACT_RECLASSIFY.

CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(),
all others use tc_classify(). When tc actions are being configured
out in the kernel, tc_classify() effectively does nothing besides
delegating.

We could spare this layer and consolidate both functions. pktgen on
single CPU constantly pushing skbs directly into the netif_receive_skb()
path with a dummy classifier on ingress qdisc attached, improves
slightly from 22.3Mpps to 23.1Mpps.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 14:18:48 -07:00
Phil Sutter 348e3435cb net: sched: drop all special handling of tx_queue_len == 0
Those were all workarounds for the formerly double meaning of
tx_queue_len, which broke scheduling algorithms if untreated.

Now that all in-tree drivers have been converted away from setting
tx_queue_len = 0, it should be safe to drop these workarounds for
categorically broken setups.

Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:08 -07:00
John Fastabend b0ab6f9275 net: sched: enable per cpu qstats
After previous patches to simplify qstats the qstats can be
made per cpu with a packed union in Qdisc struct.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:02:26 -04:00
John Fastabend 6401585366 net: sched: restrict use of qstats qlen
This removes the use of qstats->qlen variable from the classifiers
and makes it an explicit argument to gnet_stats_copy_queue().

The qlen represents the qdisc queue length and is packed into
the qstats at the last moment before passnig to user space. By
handling it explicitely we avoid, in the percpu stats case, having
to figure out which per_cpu variable to put it in.

It would probably be best to remove it from qstats completely
but qstats is a user space ABI and can't be broken. A future
patch could make an internal only qstats structure that would
avoid having to allocate an additional u32 variable on the
Qdisc struct. This would make the qstats struct 128bits instead
of 128+32.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:02:26 -04:00
John Fastabend 25331d6ce4 net: sched: implement qstat helper routines
This adds helpers to manipulate qstats logic and replaces locations
that touch the counters directly. This simplifies future patches
to push qstats onto per cpu counters.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:02:26 -04:00
John Fastabend 22e0f8b932 net: sched: make bstats per cpu and estimator RCU safe
In order to run qdisc's without locking statistics and estimators
need to be handled correctly.

To resolve bstats make the statistics per cpu. And because this is
only needed for qdiscs that are running without locks which is not
the case for most qdiscs in the near future only create percpu
stats when qdiscs set the TCQ_F_CPUSTATS flag.

Next because estimators use the bstats to calculate packets per
second and bytes per second the estimator code paths are updated
to use the per cpu statistics.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30 01:02:26 -04:00
Eric Dumazet 4a8e320c92 net: sched: use pinned timers
While using a MQ + NETEM setup, I had confirmation that the default
timer migration ( /proc/sys/kernel/timer_migration ) is killing us.

Installing this on a receiver side of a TCP_STREAM test, (NIC has 8 TX
queues) :

EST="est 1sec 4sec"
for ETH in eth1
do
 tc qd del dev $ETH root 2>/dev/null
 tc qd add dev $ETH root handle 1: mq
 tc qd add dev $ETH parent 1:1 $EST netem limit 70000 delay 6ms
 tc qd add dev $ETH parent 1:2 $EST netem limit 70000 delay 8ms
 tc qd add dev $ETH parent 1:3 $EST netem limit 70000 delay 10ms
 tc qd add dev $ETH parent 1:4 $EST netem limit 70000 delay 12ms
 tc qd add dev $ETH parent 1:5 $EST netem limit 70000 delay 14ms
 tc qd add dev $ETH parent 1:6 $EST netem limit 70000 delay 16ms
 tc qd add dev $ETH parent 1:7 $EST netem limit 80000 delay 18ms
 tc qd add dev $ETH parent 1:8 $EST netem limit 90000 delay 20ms
done

We can see that timers get migrated into a single cpu, presumably idle
at the time timers are set up.
Then all qdisc dequeues run from this cpu and huge lock contention
happens. This single cpu is stuck in softirq mode and cannot dequeue
fast enough.

    39.24%  [kernel]          [k] _raw_spin_lock
     2.65%  [kernel]          [k] netem_enqueue
     1.80%  [kernel]          [k] netem_dequeue
     1.63%  [kernel]          [k] copy_user_enhanced_fast_string
     1.45%  [kernel]          [k] _raw_spin_lock_bh

By pinning qdisc timers on the cpu running the qdisc, we respect proper
XPS setting and remove this lock contention.

     5.84%  [kernel]          [k] netem_enqueue
     4.83%  [kernel]          [k] _raw_spin_lock
     2.92%  [kernel]          [k] copy_user_enhanced_fast_string

Current Qdiscs that benefit from this change are :

	netem, cbq, fq, hfsc, tbf, htb.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 00:26:48 -04:00
Eric Dumazet ab34f64808 net: sched: use __skb_queue_head_init() where applicable
pfifo_fast and htb use skb lists, without needing their spinlocks.
(They instead use the standard qdisc lock)

We can use __skb_queue_head_init() instead of skb_queue_head_init()
to be consistent.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 16:32:10 -04:00
John Fastabend 25d8c0d55f net: rcu-ify tcf_proto
rcu'ify tcf_proto this allows calling tc_classify() without holding
any locks. Updaters are protected by RTNL.

This patch prepares the core net_sched infrastracture for running
the classifier/action chains without holding the qdisc lock however
it does nothing to ensure cls_xxx and act_xxx types also work without
locking. Additional patches are required to address the fall out.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13 12:30:25 -04:00
Eric Dumazet d2de875c6d net: use ktime_get_ns() and ktime_get_real_ns() helpers
ktime_get_ns() replaces ktime_to_ns(ktime_get())

ktime_get_real_ns() replaces ktime_to_ns(ktime_get_real())

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 19:57:23 -07:00
Eric Dumazet 6f542efcbc net_sched: htb: do not acquire qdisc lock in dump operations
htb_dump() and htb_dump_class() do not strictly need to acquire
qdisc lock to fetch qdisc and/or class parameters.

We hold RTNL and no changes can occur.

This reduces by 50% qdisc lock pressure while doing tc qdisc|class dump
operations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06 17:24:54 -05:00
Harry Mason 29824310ce sch_htb: let skb->priority refer to non-leaf class
If the class in skb->priority is not a leaf, apply filters from the
selected class, not the qdisc. This lets netfilter or user space
partially classify the packet.

Signed-off-by: Harry Mason <harry.mason@smoothwall.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 17:39:48 -08:00
Yang Yingliang a071d27241 sch_htb: use /* comments
Do not use C99 // comments and correct a spelling typo.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31 13:50:57 -05:00
Yang Yingliang c17988a90f net_sched: replace pr_warning with pr_warn
Prefer pr_warn(... to pr_warning(...

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31 13:50:56 -05:00
David S. Miller 143c905494 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/intel/i40e/i40e_main.c
	drivers/net/macvtap.c

Both minor merge hassles, simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18 16:42:06 -05:00
Yang Yingliang 6b1dd85601 sch_htb: remove unnecessary NULL pointer judgment
It already has a NULL pointer judgment of rtab in qdisc_put_rtab().
Remove the judgment outside of qdisc_put_rtab().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 15:30:17 -05:00
Yang Yingliang 1598f7cb47 net: sched: htb: fix the calculation of quantum
Now, 32bit rates may be not the true rate.
So use rate_bytes_ps which is from
max(rate32, rate64) to calcualte quantum.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11 15:08:41 -05:00
Eric Dumazet df62cdf348 net_sched: htb: support of 64bit rates
HTB already can deal with 64bit rates, we only have to add two new
attributes so that tc can use them to break the current 32bit ABI
barrier.

TCA_HTB_RATE64 : class rate  (in bytes per second)
TCA_HTB_CEIL64 : class ceil  (in bytes per second)

This allows us to setup HTB on 40Gbps links, as 32bit limit is
actually ~34Gbps

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20 14:41:03 -04:00
Eric Dumazet 3e1e3aae1f net_sched: add u64 rate to psched_ratecfg_precompute()
Add an extra u64 rate parameter to psched_ratecfg_precompute()
so that some qdisc can opt-in for 64bit rates in the future,
to overcome the ~34 Gbits limit.

psched_ratecfg_getrate() reports a legacy structure to
tc utility, so if actual rate is above the 32bit rate field,
cap it to the 34Gbit limit.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20 14:41:02 -04:00
Vimalkumar f3ad857e3d net_sched: htb: fix a typo in htb_change_class()
Fix a typo added in commit 56b765b79 ("htb: improved accuracy at high
rates")

cbuffer should not be a copy of buffer.

Signed-off-by: Vimalkumar <j.vimal@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11 17:16:22 -04:00
Jesper Dangaard Brouer 8a8e3d84b1 net_sched: restore "linklayer atm" handling
commit 56b765b79 ("htb: improved accuracy at high rates")
broke the "linklayer atm" handling.

 tc class add ... htb rate X ceil Y linklayer atm

The linklayer setting is implemented by modifying the rate table
which is send to the kernel.  No direct parameter were
transferred to the kernel indicating the linklayer setting.

The commit 56b765b79 ("htb: improved accuracy at high rates")
removed the use of the rate table system.

To keep compatible with older iproute2 utils, this patch detects
the linklayer by parsing the rate table.  It also supports future
versions of iproute2 to send this linklayer parameter to the
kernel directly. This is done by using the __reserved field in
struct tc_ratespec, to convey the choosen linklayer option, but
only using the lower 4 bits of this field.

Linklayer detection is limited to speeds below 100Mbit/s, because
at high rates the rtab is gets too inaccurate, so bad that
several fields contain the same values, this resembling the ATM
detect.  Fields even start to contain "0" time to send, e.g. at
1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have
been more broken than we first realized.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15 01:43:08 -07:00
stephen hemminger cbd375567f htb: fix sign extension bug
When userspace passes a large priority value
the assignment of the unsigned value hopt->prio
to  signed int cl->prio causes cl->prio to become negative and the
comparison is with TC_HTB_NUMPRIO is always false.

The result is that HTB crashes by referencing outside
the array when processing packets. With this patch the large value
wraps around like other values outside the normal range.

See: https://bugzilla.kernel.org/show_bug.cgi?id=60669

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02 14:52:20 -07:00
Eric Dumazet c9364636dc htb: refactor struct htb_sched fields for performance
htb_sched structures are big, and source of false sharing on SMP.

Every time a packet is queued or dequeue, many cache lines must be
touched because structures are not lay out properly.

By carefully splitting htb_sched in two parts, and define sub structures
to increase data locality, we can improve performance dramatically on
SMP.

New htb_prio structure can also be used in htb_class to increase data
locality.

I got 26 % performance increase on a 24 threads machine, with 200
concurrent netperf in TCP_RR mode, using a HTB hierarchy of 4 classes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 23:06:52 -07:00
Eric Dumazet ca4ec90b31 htb: reorder struct htb_class fields for performance
htb_class structures are big, and source of false sharing on SMP.

By carefully splitting them in two parts, we can improve performance.

I got 9 % performance increase on a 24 threads machine, with 200
concurrent netperf in TCP_RR mode, using a HTB hierarchy of 4 classes.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13 17:17:02 -07:00
Eric Dumazet 64153ce0a7 net_sched: htb: do not setup default rate estimators
With a thousand htb classes, est_timer() spends ~5 million cpu cycles
and throws out cpu cache, because each htb class has a default
rate estimator (est 4sec 16sec).

Most users do not use default rate estimators, so switch htb
to not setup ones.

Add a module parameter (htb_rate_est) so that users relying
on this default rate estimator can revert the behavior.

echo 1 >/sys/module/sch_htb/parameters/htb_rate_est

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 00:14:21 -07:00
Eric Dumazet 45203a3b38 net_sched: add 64bit rate estimators
struct gnet_stats_rate_est contains u32 fields, so the bytes per second
field can wrap at 34360Mbit.

Add a new gnet_stats_rate_est64 structure to get 64bit bps/pps fields,
and switch the kernel to use this structure natively.

This structure is dumped to user space as a new attribute :

TCA_STATS_RATE_EST64

Old tc command will now display the capped bps (to 34360Mbit), instead
of wrapped values, and updated tc command will display correct
information.

Old tc command output, after patch :

eric:~# tc -s -d qd sh dev lo
qdisc pfifo 8001: root refcnt 2 limit 1000p
 Sent 80868245400 bytes 1978837 pkt (dropped 0, overlimits 0 requeues 0)
 rate 34360Mbit 189696pps backlog 0b 0p requeues 0

This patch carefully reorganizes "struct Qdisc" layout to get optimal
performance on SMP.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11 02:51:03 -07:00
Eric Dumazet 5343a7f8be net_sched: htb: do not mix 1ns and 64ns time units
commit 56b765b79 ("htb: improved accuracy at high rates") added another
regression for low rates, because it mixes 1ns and 64ns time units.

So the maximum delay (mbuffer) was not 60 second, but 937 ms.

Lets convert all time fields to 1ns as 64bit arches are becoming the
norm.

Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-04 17:44:07 -07:00
Eric Dumazet 01cb71d2d4 net_sched: restore "overhead xxx" handling
commit 56b765b79 ("htb: improved accuracy at high rates")
broke the "overhead xxx" handling, as well as the "linklayer atm"
attribute.

tc class add ... htb rate X ceil Y linklayer atm overhead 10

This patch restores the "overhead xxx" handling, for htb, tbf
and act_police

The "linklayer atm" thing needs a separate fix.

Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vimalkumar <j.vimal@gmail.com>
Cc: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-02 22:22:35 -07:00
Eric Dumazet 6906f4ed6f htb: add HTB_DIRECT_QLEN attribute
HTB uses an internal pfifo queue, which limit is not reported
to userland tools (tc), and value inherited from device tx_queue_len
at setup time.

Introduce TCA_HTB_DIRECT_QLEN attribute to allow finer control.

Remove two obsolete pr_err() calls as well.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06 15:40:53 -05:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Jiri Pirko 292f1c7ff6 sch: make htb_rate_cfg and functions around that generic
As it is going to be used in tbf as well, push these to generic code.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12 18:59:45 -05:00
Jiri Pirko b9a7afdefd htb: initialize cl->tokens and cl->ctokens correctly
These are in ns so convert from ticks to ns.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12 18:59:44 -05:00