If something wrong happens in write endio, running snapshot-aware defragment
can end up with undefined results, maybe a crash, so we should avoid it.
In order to share similar code, this also adds a helper to free the struct for
snapshot-aware defrag.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we get any error while doing a dir index/item lookup in the
log tree, we were always unlinking the corresponding inode in
the subvolume. It makes sense to unlink only if the lookup failed
to find the dir index/item, which corresponds to NULL or -ENOENT,
and not when other errors happen (like a transient -ENOMEM or -EIO).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We were setting the csums search offset and length to the right values if
the extent is compressed, but later on right before doing the csums lookup
we were overriding these two parameters regardless of compression being
set or not for the extent.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We were ignoring the name component of the dir_item. Both the
name and data must fit within BTRFS_MAX_XATTR_SIZE(root).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Originally, we introduced scrub_super_lock to synchronize
tree log code with scrubbing super.
However we can replace scrub_super_lock with device_list_mutex,
because writing super will hold this mutex, this will reduce an extra
lock holding when writing supers in sync log code.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We define a 'int' to get extent's generation by mistake,fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
After running space balance on a new fs, the fs check program outputed the
following warning message:
free space inode generation (0) did not match free space cache generation (20)
Steps to reproduce:
# mkfs.btrfs -f <dev>
# mount <dev> <mnt>
# btrfs balance start <mnt>
# umount <mnt>
# btrfs check <dev>
It was because there was no data space after the space balance, and the free
space write out task didn't try to allocate a new data chunk for the free space
inode when doing the reservation. So the data space reservation failed, and in
order to tell the free space loader that this free space inode could not be
trusted, the generation of the free space inode wasn't updated. Then the check
program found this problem and outputed the above message.
But in fact, it is safe that we try to allocate a new data chunk when we find
the data space is not enough. The patch fixes the above problem by this way.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I noticed with my horrible snapshot excercisor that we were taking forever to
relocate the larger the file system got. This appeared to be because we were
committing the transaction _constantly_. There were a few places where we do
braindead things with metadata reservation, like start a transaction and then
try to refill the block rsv, which not only keeps us from committing a
transaction during the enospc stuff, but keeps us from doing some of the harder
flushing work which will make us more likely to need to commit the transaction.
We also were checking the block rsv and committing the transaction if the block
rsv was below a certain threshold, but we were doing this in a place where we
don't actually keep anything in the block rsv so this was always ending up false
so we always committed the transaction in this case. I tested this to make sure
it didn't break anything, but it takes about 10 hours to get the box to this
state so I don't know how much of an impact it will really make. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When using delalloc workers in a non-waiting way (like for enospc handling) we
can end up not actually waiting for the dirty pages to be started if we have
compression. We need to add an extra filemap flush to make sure any async
extents that have started are actually moved along before returning. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a list corruption warning from btrfs_remove_ordered_extent, it
is because we aren't taking the ordered_root_lock when we remove the inode from
the ordered operations list. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This is just the write path, the only reason we start a transaction is so we can
check cross references, we don't make any actual changes, so there is no reason
to abort the transaction if we fail. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We can just return an error and we'll bail out properly. We still want to catch
this case to make sure we don't have a bug somewhere, so just warn if this pops
up. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I noticed that if the free space cache has an error writing out it's data it
won't actually error out, it will just carry on. This is because it doesn't
check the return value of btrfs_wait_ordered_range, which didn't actually return
anything. So fix this in order to keep us from making free space cache look
valid when it really isnt. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Apparently we don't actually close the files until we return to userspace, so
stop using vfs_read in send. This is actually better for us since we can avoid
all the extra logic of holding the file we're sending open and making sure to
clean it up. This will fix people who have been hitting too many files open
errors when trying to send. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In mixed-mode, when a data-block was later reused for metadata, a
warning was printed. This condition is now filtered out and the
warning is eliminated in this case.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Yet another cleanup patch broke code for which no xfstest exists.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Instead of doing another extent tree search if the first search failed
to find a metadata item, check if the previous item in the leaf is an
extent item and use it if it is, otherwise do the second tree search
for an extent item.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When debugging ENOSPC issues, it's nice to be able to see which
reservations failed as well as the ones which succeeded.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
fs/btrfs/compat.h only contained trivial macro wrappers of drop_nlink()
and inc_nlink(). This doesn't belong in mainline.
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
move_pages() has an inefficient backwards byte copy of regions of two
different pages. They're different pages so the regions won't overlap
and it could use memcpy().
At that point, though, move_pages() would be a slightly dimmer
re-implementation of copy_pages() that lacked the test for overlapping
page regions.
So remove move_pages() and just call copy_pages().
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When a directory has a default ACL and a subdirectory is created
under that directory, btrfs_init_acl() is called when the
subdirectory's inode is created to initialize the inode's ACL
(inherited from the parent directory) but it was clearing the ACL
from the inode after setting it if posix_acl_create() returned
success, instead of clearing it only if it returned an error.
To reproduce this issue:
$ mkfs.btrfs -f /dev/loop0
$ mount /dev/loop0 /mnt
$ mkdir /mnt/acl
$ setfacl -d --set u::rwx,g::rwx,o::- /mnt/acl
$ getfacl /mnt/acl
user::rwx
group::rwx
other::r-x
default:user::rwx
default:group::rwx
default:other::---
$ mkdir /mnt/acl/dir1
$ getfacl /mnt/acl/dir1
user::rwx
group::rwx
other::---
After unmounting and mounting again the filesystem, fgetacl returned the
expected ACL:
$ umount /mnt/acl
$ mount /dev/loop0 /mnt
$ getfacl /mnt/acl/dir1
user::rwx
group::rwx
other::---
default:user::rwx
default:group::rwx
default:other::---
Meaning that the underlying xattr was persisted.
Reported-by: Giuseppe Fierro <giuseppe@fierro.org>
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Due to an off-by-one error, it is possible to reproduce a bug
when the inode cache is used.
The same inode number is assigned twice, the second time this
leads to an EEXIST in btrfs_insert_empty_items().
The issue can happen when a file is removed right after a subvolume
is created and then a new inode number is created before the
inodes in free_inode_pinned are processed.
unlink() calls btrfs_return_ino() which calls start_caching() in this
case which adds [highest_ino + 1, BTRFS_LAST_FREE_OBJECTID] by
searching for the highest inode (which already cannot find the
unlinked one anymore in btrfs_find_free_objectid()). So if this
unlinked inode's number is equal to the highest_ino + 1 (or >= this value
instead of > this value which was the off-by-one error), we mustn't add
the inode number to free_ino_pinned (caching_thread() does it right).
In this case we need to try directly to add the number to the inode_cache
which will fail in this case.
When this inode number is allocated while it is still in free_ino_pinned,
it is allocated and still added to the free inode cache when the
pinned inodes are processed, thus one of the following inode number
allocations will get an inode that is already in use and fail with EEXIST
in btrfs_insert_empty_items().
One example which was created with the reproducer below:
Create a snapshot, work in the newly created snapshot for the rest.
In unlink(inode 34284) call btrfs_return_ino() which calls start_caching().
start_caching() calls add_free_space [34284, 18446744073709517077].
In btrfs_return_ino(), call start_caching pinned [34284, 1] which is wrong.
mkdir() call btrfs_find_ino_for_alloc() which returns the number 34284.
btrfs_unpin_free_ino calls add_free_space [34284, 1].
mkdir() call btrfs_find_ino_for_alloc() which returns the number 34284.
EEXIST when the new inode is inserted.
One possible reproducer is this one:
#!/bin/sh
# preparation
TEST_DEV=/dev/sdc1
TEST_MNT=/mnt
umount ${TEST_MNT} 2>/dev/null || true
mkfs.btrfs -f ${TEST_DEV}
mount ${TEST_DEV} ${TEST_MNT} -o \
rw,relatime,compress=lzo,space_cache,inode_cache
btrfs subv create ${TEST_MNT}/s1
for i in `seq 34027`; do touch ${TEST_MNT}/s1/${i}; done
btrfs subv snap ${TEST_MNT}/s1 ${TEST_MNT}/s2
FILENAME=`find ${TEST_MNT}/s1/ -inum 4085 | sed 's|^.*/\([^/]*\)$|\1|'`
rm ${TEST_MNT}/s2/$FILENAME
touch ${TEST_MNT}/s2/$FILENAME
# the following steps can be repeated to reproduce the issue again and again
[ -e ${TEST_MNT}/s3 ] && btrfs subv del ${TEST_MNT}/s3
btrfs subv snap ${TEST_MNT}/s2 ${TEST_MNT}/s3
rm ${TEST_MNT}/s3/$FILENAME
touch ${TEST_MNT}/s3/$FILENAME
ls -alFi ${TEST_MNT}/s?/$FILENAME
touch ${TEST_MNT}/s3/_1 || logger FAILED
ls -alFi ${TEST_MNT}/s?/_1
touch ${TEST_MNT}/s3/_2 || logger FAILED
ls -alFi ${TEST_MNT}/s?/_2
touch ${TEST_MNT}/s3/__1 || logger FAILED
ls -alFi ${TEST_MNT}/s?/__1
touch ${TEST_MNT}/s3/__2 || logger FAILED
ls -alFi ${TEST_MNT}/s?/__2
# if the above is not enough, add the following loop:
for i in `seq 3 9`; do touch ${TEST_MNT}/s3/__${i} || logger FAILED; done
#for i in `seq 3 34027`; do touch ${TEST_MNT}/s3/__${i} || logger FAILED; done
# one of the touch(1) calls in s3 fail due to EEXIST because the inode is
# already in use that btrfs_find_ino_for_alloc() returns.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we decrement the key type, we must reset its offset to the largest
possible offset (u64)-1. If we decrement the key's objectid, then we
must reset the key's type and offset to their largest possible values,
(u8)-1 and (u64)-1 respectively. Not doing so can make us miss an
items in the tree.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Avoid repeated tree searches by processing all inode ref items in
a leaf at once instead of processing one at a time, followed by a
path release and a tree search for a key with a decremented offset.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Use memdup_user rather than duplicating its implementation
This is a little bit restricted to reduce false positives
The semantic patch that makes this report is available
in scripts/coccinelle/api/memdup_user.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Comparison of an inode's last modified transaction with the last committed
transaction is incorrect. Fix it.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If the path allocation failed, we would return without decrementing
the reference count in the delayed node we got before, resulting
in a leak.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If the user remounts the filesystem read-only while the uuid-tree
scan and rebuild task is still running (this happens once after the
filesystem was mounted with an old kernel, or when forced with the
mount options), the remount should wait on the tasks completion
before setting the filesystem read-only. Otherwise the background
task continues to write to the filesystem which is apparently not
what users expect.
The reproducer:
TEST_DEV=/dev/sdzzzzz1
TEST_MNT=/mnt
mkfs.btrfs -f $TEST_DEV
mount $TEST_DEV $TEST_MNT
for i in `seq 50000`; do btrfs subvolume create ${TEST_MNT}/$i; done
umount $TEST_MNT
mount $TEST_DEV $TEST_MNT -o rescan_uuid_tree
sleep 1
ps -elf | fgrep '[btrfs-uuid]' | grep -v grep
mount $TEST_DEV $TEST_MNT -o ro,remount
ps -elf | fgrep '[btrfs-uuid]' | grep -v grep
sleep 1
umount $TEST_MNT
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Device stats are only initialized (read from tree items) on mount.
Trying to read device stats after adding or replacing new devices will
return errors.
btrfs_init_new_device() and btrfs_init_dev_replace_tgtdev() are the two
functions that allocate and initialize new btrfs_device structures after
a filesystem is mounted. They set the device stats to zero by using
kzalloc() which is correct for new devices. The only missing thing was
to declare these stats as being valid (device->dev_stats_valid = 1) and
this patch adds this missing code.
This is the reproducer:
TEST_DEV1=/dev/sdzzzzz1
TEST_DEV2=/dev/sdzzzzz2
TEST_DEV3=/dev/sdzzzzz3
TEST_MNT=/mnt
mkfs.btrfs $TEST_DEV1
mount $TEST_DEV1 $TEST_MNT
btrfs device add $TEST_DEV2 $TEST_MNT
btrfs device stat $TEST_MNT
btrfs replace start -B $TEST_DEV2 $TEST_DEV3 $TEST_MNT
btrfs device stat $TEST_MNT
umount $TEST_MNT
Reported-by: Ondrej Kunc <kunc88@gmail.com>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When we fail to add a reference after a non-inline insertion by some reasons,
eg. ENOSPC, we'll abort the transaction, but we don't return this error to
the caller who has to walk around again to find something wrong, that's
unnecessary.
Also fixup other error paths to keep it simple.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
For both balance and replace, cancelling involves changing the on-disk
state and committing a transaction, which is not a good thing to do on
read-only filesystems.
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
struct btrfs_ioctl_dev_replace_args memory is leaked if replace is
requested on a read-only filesystem. Fix it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
On mount failures, __btrfs_close_devices can be called well before
dev-replace state is read and ->is_tgtdev_for_dev_replace is set. This
leads to a bogus decrement of ->rw_devices and sets off a WARN_ON in
__btrfs_close_devices if replace target device happens to be on the
lists and we fail early in the mount sequence. Fix this by checking
the devid instead of ->is_tgtdev_for_dev_replace before the decrement:
for replace targets devid is always equal to BTRFS_DEV_REPLACE_DEVID.
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In add_inode_ref() function:
Initializes local pointers.
Reduces the logical condition with the __add_inode_ref() return
value by using only one 'goto out'.
Centralizes the exiting, ensuring the freeing of all used memory.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
After commit de78b51a28
(btrfs: remove cache only arguments from defrag path), @blockptr is no more
used.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
@is_extent is no more needed since we don't defrag extent root.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The btrfs_insert_empty_item() function doesn't modify its
key argument.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
alloc_extent_buffer() uses radix_tree_lookup() when radix_tree_insert()
fails with EEXIST. That part of the code is very similar to the code in
find_extent_buffer(). This patch replaces radix_tree_lookup() and
surrounding code in alloc_extent_buffer() with find_extent_buffer().
Note that radix_tree_lookup() does not need to be protected by
tree->buffer_lock. It is protected by eb->refs.
While at it, this patch
- changes the other usage of radix_tree_lookup() in alloc_extent_buffer()
with find_extent_buffer() to reduce redundancy.
- removes the unused argument 'len' to find_extent_buffer().
Signed-Off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Zach Brown <zab@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Whoever wrote this was braindead. Also it doesn't work right if you have
VACANCY's since we assumed you would only have that at the end of the file,
which won't be the case in the near future. I tested this with generic/285 and
generic/286 as well as the btrfs tests that use fssum since it uses
seek_hole/seek_data to verify things are ok. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I was hitting weird issues when trying to remove hole extents and it turned out
it was because I was sending non-aligned offsets down to
btrfs_lookup_csums_range. So add an assert for this in case somebody trips over
this in the future. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I added an assert to make sure we were looking up aligned offsets for csums and
I tripped it when running xfstests. This is because log_one_extent was checking
if block_start == 0 for a hole instead of EXTENT_MAP_HOLE. This worked out fine
in practice it seems, but it adds a lot of extra work that is uneeded. With
this fix I'm no longer tripping my assert. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Btrfs_get_extent was not handling this case properly, add a test to make sure we
don't regress. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
While trying to kill our hole extents I noticed I was seeing problems where we
seek into a file and then start writing and then try to fiemap that file later.
This is because we search for offset 0, don't find anything and so back up one
slot, which puts us at the inode ref or something like that, which means we goto
not_found and create an extent map for our entire search area. This isn't quite
what we want, we want to move forward one slot and see if there is an extent
there so we can limit our hole extent. This patch fixes this problem, I will
add a testcase for this as well. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Stefan was hitting a panic in the async worker stuff because we had outstanding
read bios while we were stopping the worker threads. You could reproduce this
easily if you mount -o nospace_cache and ran generic/273. This is because the
caching thread stuff is still going and we were stopping all the worker threads.
We need to stop the workers after this work is done, and the free block groups
code will wait for all the caching threads to stop first so we don't run into
this problem. With this patch we no longer panic. Thanks,
Cc: stable@vger.kernel.org
Reported-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I'm going to be removing hole extents in the near future so I wanted to make a
sanity test for btrfs_get_extent to make sure I don't break anything in the
meantime. This patch just puts btrfs_get_extent through its paces by giving it
a completely unreasonable mapping to look at and make sure it is giving us back
maps that make sense. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
So both Liu and I made huge messes of find_lock_delalloc_range trying to fix
stuff, me first by fixing extent size, then him by fixing something I broke and
then me again telling him to fix it a different way. So this is obviously a
candidate for some testing. This patch adds a pseudo fs so we can allocate fake
inodes for tests that need an inode or pages. Then it addes a bunch of tests to
make sure find_lock_delalloc_range is acting the way it is supposed to. With
this patch and all of our previous patches to find_lock_delalloc_range I am sure
it is working as expected now. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
While trying to track down a reserved space leak I noticed a few places where we
won't properly clean up reserved space if we have an error, this patch fixes
those up. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In trying to track down where we were leaking reserved space I noticed our
reserve extent tracepoints are a little off. First we were saying that the
reserved space had been alloced in btrfs_reserve_extent, which isn't the case,
this needs to be triggered when we actually allocate the space when we run the
delayed ref. We were also missing a few places where we should have been
tracing the btrfs_reserve_extent_free tracepoint. With these in place I was
able to put together where we were leaking reserved space. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we abort a transaction we will do the tree log cleanup at unmount, but this
happens after we free up the block groups. This makes all the leak detection
warnings go off because we think we've leaked space but in reality we just
haven't cleaned it up yet. So instead do the block group cleanup stuff after
free'ing the fs roots so we don't get these warnings. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
On error we will wait and free the tree log at unmount without a transaction.
This means that the actual freeing of the blocks doesn't happen which means we
complain about space leaks on unmount. So to fix this just skip the transaction
specific cleanup part of the tree log free'ing if we don't have a transaction
and that way we can free up our reserved space and our counters stay happy.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The transactions should be cleaning up their reservations on failure, this just
causes us to have warnings on unmount because we go negative by free'ing
reservations that have already been free'ed. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Replace progresses strictly from lower to higher offsets, and the
progress is tracked in chunks, by storing the physical offset of the
dev_extent which is being copied in the cursor_left field of
btrfs_dev_replace_item. When we are done copying the chunk,
left_cursor is updated to point one byte past the dev_extent, so that
on resume we can skip the dev_extents that have already been copied.
There is a major bug (which goes all the way back to the inception of
dev-replace in 3.8) in the way left_cursor is bumped: the bump is done
unconditionally, without any regard to the scrub_chunk return value.
On suspend (and also on any kind of error) scrub_chunk returns early,
i.e. without completing the copy. This leads to us skipping the chunk
that hasn't been fully copied yet when resuming.
Fix this by doing the cursor_left update only if scrub_chunk ret is 0.
(On suspend scrub_chunk returns with -ECANCELED, so this fix covers
both suspend and error cases.)
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Currently the hash value used for adding an inode to the VFS's inode
hash table consists of the plain inode number, which is a 64 bits
integer. This results in hash table buckets (hlist_head lists) with
too many elements for at least 2 important scenarios:
1) When we have many subvolumes. Each subvolume has its own btree
where its files and directories are added to, and each has its
own objectid (inode number) namespace. This means that if we have
N subvolumes, and all have inode number X associated to a file or
directory, the corresponding inodes all map to the same hash table
entry, resulting in a bucket (hlist_head list) with N elements;
2) On 32 bits machines. Th VFS hash values are unsigned longs, which
are 32 bits wide on 32 bits machines, and the inode (objectid)
numbers are 64 bits unsigned integers. We simply cast the inode
numbers to hash values, which means that for all inodes with the
same 32 bits lower half, the same hash bucket is used for all of
them. For example, all inodes with a number (objectid) between
0x0000_0000_ffff_ffff and 0xffff_ffff_ffff_ffff will end up in
the same hash table bucket.
This change ensures the inode's hash value depends both on the
objectid (inode number) and its subvolume's (btree root) objectid.
For 32 bits machines, this change gives better entropy by making
the hash value depend on both the upper and lower 32 bits of the
64 bits hash previously computed.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In tree-log.c:btrfs_log_inode(), we keep calling btrfs_search_forward()
until it returns a key whose objectid is higher than our inode or until
the key's type is higher than our maximum allowed type.
At the end of the loop, we increment our mininum search key's objectid
and type regardless of our desired target objectid and maximum desired
type, which causes another loop iteration that will call again
btrfs_search_forward() just to figure out we've gone beyond our maximum
key and exit the loop. Therefore while incrementing our minimum key,
don't do it blindly and exit the loop immiediately if the next search
key's objectid or type is beyond what we seek.
Also after incrementing the type, set the key's offset to 0, which was
missing and could make us loose some of the inode's items.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is not used for anything.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
As we're hold a ref on looking up the extent map, we need to drop the ref
before returning to callers.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The performance was slowed down sometimes when we ran sysbench to measure
the performance of the sequential buffered write by 2 or more threads.
It was because the write order of the test threads might be confused
by the task scheduler, and the coming write would be beyond the end of
the file, in this case, we need insert dummy file extents and create
a hole for the area we skip. But in order to avoid the ongoing ordered
extents which are in the area, we need wait for them. Unfortunately,
the current code doesn't check if there are ordered extents in the area
or not, try to find and flush the dirty pages directly, but in fact,
there is no dirty page in that area, this step of the current code is
unnecessary, and just wastes time. Sometimes, it would increase
the contention of some locks, and makes the performance slow down suddenly.
So we remove the ordered extent flush function before the check, and flush
the dirty pages and wait for the ordered extents only when we find them.
According to my test, we got 1-2 times of the performance regression when
we ran the test by 10 times before applying this patch. After applying
this patch, the regression went away.
Test Environment:
CPU: 1CPU * 4Cores
Memory: 6GB
Partition: 20GB
Test Command:
# sysbench --test=fileio --file-total-size=16G --file-test-mode=seqwr \
> --num-threads=512 --file-block-size=16384 --max-time=60 --max-requests=0 run
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
When we did space balance and snapshot creation at the same time, we might
meet the following oops:
kernel BUG at fs/btrfs/inode.c:3038!
[SNIP]
Call Trace:
[<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs]
[<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs]
[<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs]
[<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs]
[<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs]
[<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379
[<ffffffff811215a9>] vfs_ioctl+0x1d/0x39
[<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2
[<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8
[<ffffffff81121e88>] SyS_ioctl+0x57/0x83
[<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14
[<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs]
The reason of the problem is that the relocation root creation stole
the reserved space, which was reserved for orphan item deletion.
There are several ways to fix this problem, one is to increasing
the reserved space size of the space balace, and then we can use
that space to create the relocation tree for each fs/file trees.
But it is hard to calculate the suitable size because we doesn't
know how many fs/file trees we need relocate.
We fixed this problem by reserving the space for relocation root creation
actively since the space it need is very small (one tree block, used for
root node copy), then we use that reserved space to create the
relocation tree. If we don't reserve space for relocation tree creation,
we will use the reserved space of the balance.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove unused parameter, 'eb'. Unused since introduction in
5f39d397df
Updated to be rebased against current upstream and correct diff supplied this time!
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I was noticing the slab redzone stuff going off every once and a while during
transaction aborts. This was caused by two things
1) We would walk the pending snapshots and set their error to -ECANCELED. We
don't need to do this, the snapshot stuff waits for a transaction commit and if
there is a problem we just free our pending snapshot object and exit. Doing
this was causing us to touch the pending snapshot object after the thing had
already been freed.
2) We were freeing the transaction manually with wanton disregard for it's
use_count reference counter. To fix this I cleaned up the transaction freeing
loop to either wait for the transaction commit to finish if it was in the middle
of that (since it will be cleaned and freed up there) or to do the cleanup
oursevles.
I also moved the global "kill all things dirty everywhere" stuff outside of the
transaction cleanup loop since that only needs to be done once. With this patch
I'm no longer seeing slab corruption because of use after frees. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Noticed this when forcing errors to happen during delayed ref running. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
During transaction cleanup after an abort we are just removing roots from the
ordered roots list which is incorrect. We have a BUG_ON() to make sure that the
root is still part of the ordered roots list when we put our ordered extent
which we were tripping in this case. So do like we do everywhere else and just
move it to the tail of the ordered roots list and allow the normal cleanup to
take care of stuff. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we abort not during a transaction commit we won't clean up anything until we
unmount. Unfortunately if we abort in the middle of writing out an ordered
extent we won't clean it up and if somebody is waiting on that ordered extent
they will wait forever. To fix this just make the transaction kthread call the
cleanup transaction stuff if it notices theres an error, and make
btrfs_end_transaction wake up the transaction kthread if there is an error.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I've been testing our error paths and I was tripping the BUG_ON() in
drop_outstanding_extent because our outstanding_extents is 0 for space cache
inodes. This is because we don't reserve metadata space for these inodes since
we depend on the global block reserve for our space. To fix this we need to
make sure the DO_ACCOUNTING stuff doesn't actually call release_metadata for
space cache inodes. With this patch I'm no longer panicing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If we abort a transaction in the middle of a commit we weren't undoing the
intwrite locking. This patch fixes that problem.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a problem where they were getting csum errors when running a
balance and running systemd's journal. This is because systemd is awesome and
fallocate()'s its log space and writes into it. Unfortunately we assume that
when we read in all the csums for an extent that they are sequential starting at
the bytenr we care about. This obviously isn't the case for prealloc extents,
where we could have written to the middle of the prealloc extent only, which
means the csum would be for the bytenr in the middle of our range and not the
front of our range. Fix this by offsetting the new bytenr we are logging to
based on the original bytenr the csum was for. With this patch I no longer see
the csum errors I was seeing. Thanks,
Cc: stable@vger.kernel.org
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In extent-tree.c:btrfs_write_dirty_block_groups(), if the call to
write_one_cache_group() failed, we would return without putting
the block group first.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Currently the fs sync function (super.c:btrfs_sync_fs()) doesn't
wait for delayed work to finish before returning success to the
caller. This change fixes this, ensuring that there's no data loss
if a power failure happens right after fs sync returns success to
the caller and before the next commit happens.
Steps to reproduce the data loss issue:
$ mkfs.btrfs -f /dev/sdb3
$ mount /dev/sdb3 /mnt/btrfs
$ perl -e '$d = ("\x41" x 6001); open($f,">","/mnt/btrfs/foobar"); print $f $d; close($f);' && btrfs fi sync /mnt/btrfs
Right after the btrfs fi sync command (a second or 2 for example), power
off the machine and reboot it. The file will be empty, as it can be verified
after mounting the filesystem and through btrfs-debug-tree:
$ btrfs-debug-tree /dev/sdb3 | egrep '\(257 INODE_ITEM 0\) itemoff' -B 3 -A 8
item 3 key (256 DIR_INDEX 2) itemoff 3751 itemsize 36
location key (257 INODE_ITEM 0) type FILE
namelen 6 datalen 0 name: foobar
item 4 key (257 INODE_ITEM 0) itemoff 3591 itemsize 160
inode generation 7 transid 7 size 0 block group 0 mode 100644 links 1
item 5 key (257 INODE_REF 256) itemoff 3575 itemsize 16
inode ref index 2 namelen 6 name: foobar
checksum tree key (CSUM_TREE ROOT_ITEM 0)
leaf 29429760 items 0 free space 3995 generation 7 owner 7
fs uuid 6192815c-af2a-4b75-b3db-a959ffb6166e
chunk uuid b529c44b-938c-4d3d-910a-013b4700bcae
uuid tree key (UUID_TREE ROOT_ITEM 0)
After this patch, the data loss no longer happens after a power failure and
btrfs-debug-tree shows:
$ btrfs-debug-tree /dev/sdb3 | egrep '\(257 INODE_ITEM 0\) itemoff' -B 3 -A 8
item 3 key (256 DIR_INDEX 2) itemoff 3751 itemsize 36
location key (257 INODE_ITEM 0) type FILE
namelen 6 datalen 0 name: foobar
item 4 key (257 INODE_ITEM 0) itemoff 3591 itemsize 160
inode generation 6 transid 6 size 6001 block group 0 mode 100644 links 1
item 5 key (257 INODE_REF 256) itemoff 3575 itemsize 16
inode ref index 2 namelen 6 name: foobar
item 6 key (257 EXTENT_DATA 0) itemoff 3522 itemsize 53
extent data disk byte 12845056 nr 8192
extent data offset 0 nr 8192 ram 8192
extent compression 0
checksum tree key (CSUM_TREE ROOT_ITEM 0)
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In inode.c:btrfs_orphan_add() if we failed to insert the orphan
item, we would return without decrementing the orphan count that
we just incremented before attempting the insertion, leaving the
orphan inode count wrong.
In inode.c:btrfs_orphan_del(), we were decrementing the inode
orphan count if the bit BTRFS_INODE_ORPHAN_META_RESERVED was set,
which is logically wrong because it should be decremented if the
bit BTRFS_INODE_HAS_ORPHAN_ITEM was set - after all we increment
the count when we set the bit BTRFS_INODE_HAS_ORPHAN_ITEM elsewhere.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Similar to ocfs2, btrfs also supports that extents can be shared by
different inodes, and there are some userspace tools requesting
for this kind of 'space shared infomation'.[1]
ocfs2 uses flag FIEMAP_EXTENT_SHARED, so does btrfs.
[1]: http://thr3ads.net/ocfs2-devel/2010/09/489052-PATCH-3-3-shared-du-using-fiemap-to-figure-up-the-shared-extents-per-file-and-the-footprint-in
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Not used for anything, and removing it avoids caller's need to
allocate a path structure.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We're doing a unnecessary extra lookup of the ino cache's
inode when we already have it (and holding a reference)
during the process of saving the ino cache contents to disk.
Therefore remove this extra lookup.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
While running some snashot aware defrag tests I noticed I was panicing every
once and a while in key_search. This is because of the optimization that says
if we find a key at slot 0 it will be at slot 0 all the way down the rest of the
tree. This isn't the case for btrfs_search_old_slot since it will likely replay
changes to a buffer if something has changed since we took our sequence number.
So short circuit this optimization by setting prev_cmp to -1 every time we call
key_search so we will do our normal binary search. With this patch I am no
longer seeing the panics I was seeing before. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
While looking at somebodys corruption I became completely convinced that
btrfs_split_item was broken, so I wrote this test to verify that it was working
as it was supposed to. Thankfully it appears to be working as intended, so just
add this test to make sure nobody breaks it in the future. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove unused eb parameter from btrfs_item_nr
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is not necessary to store the NULL byte in a symlink inline file
extent. There's currently no code that requires the NULL byte to be
present in the extent. This change also doesn't break file format
compatibility nor the send/receive feature.
The VFS also doesn't need the NULL byte to be present in the extent,
as it reads up to inode->i_size bytes (which already excluded the NULL
byte) and sets the NULL byte for us (in fs/namei.c:page_getlink()).
So with this change we save 1 byte per symlink file extent (which is
always inlined in the btree leaf) without losing backward and forward
compatibility.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The fact that btrfs_root_refs() returned 0 for the tree_root caused
bugs in the past, therefore it is set to 1 with this patch and
(hopefully) all affected code is adapted to this change.
I verified this change by temporarily adding WARN_ON() checks
everywhere where btrfs_root_refs() is used, checking whether the
logic of the code is changed by btrfs_root_refs() returning 1
instead of 0 for root->root_key.objectid == BTRFS_ROOT_TREE_OBJECTID.
With these added checks, I ran the xfstests './check -g auto'.
The two roots chunk_root and log_root_tree that are only referenced
by the superblock and the log_roots below the log_root_tree still
have btrfs_root_refs() == 0, only the tree_root is changed.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs fix from Chris Mason:
"Sage hit a deadlock with ceph on btrfs, and Josef tracked it down to a
regression in our initial rc1 pull. When doing nocow writes we were
sometimes starting a transaction with locks held"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: release path before starting transaction in can_nocow_extent
We can't be holding tree locks while we try to start a transaction, we will
deadlock. Thanks,
Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Pull btrfs fixes from Chris Mason:
"We've got more bug fixes in my for-linus branch:
One of these fixes another corner of the compression oops from last
time. Miao nailed down some problems with concurrent snapshot
deletion and drive balancing.
I kept out one of his patches for more testing, but these are all
stable"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix oops caused by the space balance and dead roots
Btrfs: insert orphan roots into fs radix tree
Btrfs: limit delalloc pages outside of find_delalloc_range
Btrfs: use right root when checking for hash collision
When doing space balance and subvolume destroy at the same time, we met
the following oops:
kernel BUG at fs/btrfs/relocation.c:2247!
RIP: 0010: [<ffffffffa04cec16>] prepare_to_merge+0x154/0x1f0 [btrfs]
Call Trace:
[<ffffffffa04b5ab7>] relocate_block_group+0x466/0x4e6 [btrfs]
[<ffffffffa04b5c7a>] btrfs_relocate_block_group+0x143/0x275 [btrfs]
[<ffffffffa0495c56>] btrfs_relocate_chunk.isra.27+0x5c/0x5a2 [btrfs]
[<ffffffffa0459871>] ? btrfs_item_key_to_cpu+0x15/0x31 [btrfs]
[<ffffffffa048b46a>] ? btrfs_get_token_64+0x7e/0xcd [btrfs]
[<ffffffffa04a3467>] ? btrfs_tree_read_unlock_blocking+0xb2/0xb7 [btrfs]
[<ffffffffa049907d>] btrfs_balance+0x9c7/0xb6f [btrfs]
[<ffffffffa049ef84>] btrfs_ioctl_balance+0x234/0x2ac [btrfs]
[<ffffffffa04a1e8e>] btrfs_ioctl+0xd87/0x1ef9 [btrfs]
[<ffffffff81122f53>] ? path_openat+0x234/0x4db
[<ffffffff813c3b78>] ? __do_page_fault+0x31d/0x391
[<ffffffff810f8ab6>] ? vma_link+0x74/0x94
[<ffffffff811250f5>] vfs_ioctl+0x1d/0x39
[<ffffffff811258c8>] do_vfs_ioctl+0x32d/0x3e2
[<ffffffff811259d4>] SyS_ioctl+0x57/0x83
[<ffffffff813c3bfa>] ? do_page_fault+0xe/0x10
[<ffffffff813c73c2>] system_call_fastpath+0x16/0x1b
It is because we returned the error number if the reference of the root was 0
when doing space relocation. It was not right here, because though the root
was dead(refs == 0), but the space it held still need be relocated, or we
could not remove the block group. So in this case, we should return the root
no matter it is dead or not.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Now we don't drop all the deleted snapshots/subvolumes before the space
balance. It means we have to relocate the space which is held by the dead
snapshots/subvolumes. So we must into them into fs radix tree, or we would
forget to commit the change of them when doing transaction commit, and it
would corrupt the metadata.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Liu fixed part of this problem and unfortunately I steered him in slightly the
wrong direction and so didn't completely fix the problem. The problem is we
limit the size of the delalloc range we are looking for to max bytes and then we
try to lock that range. If we fail to lock the pages in that range we will
shrink the max bytes to a single page and re loop. However if our first page is
inside of the delalloc range then we will end up limiting the end of the range
to a period before our first page. This is illustrated below
[0 -------- delalloc range --------- 256mb]
[page]
So find_delalloc_range will return with delalloc_start as 0 and end as 128mb,
and then we will notice that delalloc_start < *start and adjust it up, but not
adjust delalloc_end up, so things go sideways. To fix this we need to not limit
the max bytes in find_delalloc_range, but in find_lock_delalloc_range and that
way we don't end up with this confusion. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
btrfs_rename was using the root of the old dir instead of the root of the new
dir when checking for a hash collision, so if you tried to move a file into a
subvol it would freak out because it would see the file you are trying to move
in its current root. This fixes the bug where this would fail
btrfs subvol create test1
btrfs subvol create test2
mv test1 test2.
Thanks to Chris Murphy for catching this,
Cc: stable@vger.kernel.org
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
free_device rcu callback, scheduled from btrfs_rm_dev_replace_srcdev,
can be processed before btrfs_scratch_superblock is called, which would
result in a use-after-free on btrfs_device contents. Fix this by
zeroing the superblock before the rcu callback is registered.
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The current implementation of worker threads in Btrfs has races in
worker stopping code, which cause all kinds of panics and lockups when
running btrfs/011 xfstest in a loop. The problem is that
btrfs_stop_workers is unsynchronized with respect to check_idle_worker,
check_busy_worker and __btrfs_start_workers.
E.g., check_idle_worker race flow:
btrfs_stop_workers(): check_idle_worker(aworker):
- grabs the lock
- splices the idle list into the
working list
- removes the first worker from the
working list
- releases the lock to wait for
its kthread's completion
- grabs the lock
- if aworker is on the working list,
moves aworker from the working list
to the idle list
- releases the lock
- grabs the lock
- puts the worker
- removes the second worker from the
working list
......
btrfs_stop_workers returns, aworker is on the idle list
FS is umounted, memory is freed
......
aworker is waken up, fireworks ensue
With this applied, I wasn't able to trigger the problem in 48 hours,
whereas previously I could reliably reproduce at least one of these
races within an hour.
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The crash[1] is found by xfstests/generic/208 with "-o compress",
it's not reproduced everytime, but it does panic.
The bug is quite interesting, it's actually introduced by a recent commit
(573aecafca,
Btrfs: actually limit the size of delalloc range).
Btrfs implements delay allocation, so during writeback, we
(1) get a page A and lock it
(2) search the state tree for delalloc bytes and lock all pages within the range
(3) process the delalloc range, including find disk space and create
ordered extent and so on.
(4) submit the page A.
It runs well in normal cases, but if we're in a racy case, eg.
buffered compressed writes and aio-dio writes,
sometimes we may fail to lock all pages in the 'delalloc' range,
in which case, we need to fall back to search the state tree again with
a smaller range limit(max_bytes = PAGE_CACHE_SIZE - offset).
The mentioned commit has a side effect, that is, in the fallback case,
we can find delalloc bytes before the index of the page we already have locked,
so we're in the case of (delalloc_end <= *start) and return with (found > 0).
This ends with not locking delalloc pages but making ->writepage still
process them, and the crash happens.
This fixes it by just thinking that we find nothing and returning to caller
as the caller knows how to deal with it properly.
[1]:
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2170!
[...]
CPU: 2 PID: 11755 Comm: btrfs-delalloc- Tainted: G O 3.11.0+ #8
[...]
RIP: 0010:[<ffffffff810f5093>] [<ffffffff810f5093>] clear_page_dirty_for_io+0x1e/0x83
[...]
[ 4934.248731] Stack:
[ 4934.248731] ffff8801477e5dc8 ffffea00049b9f00 ffff8801869f9ce8 ffffffffa02b841a
[ 4934.248731] 0000000000000000 0000000000000000 0000000000000fff 0000000000000620
[ 4934.248731] ffff88018db59c78 ffffea0005da8d40 ffffffffa02ff860 00000001810016c0
[ 4934.248731] Call Trace:
[ 4934.248731] [<ffffffffa02b841a>] extent_range_clear_dirty_for_io+0xcf/0xf5 [btrfs]
[ 4934.248731] [<ffffffffa02a8889>] compress_file_range+0x1dc/0x4cb [btrfs]
[ 4934.248731] [<ffffffff8104f7af>] ? detach_if_pending+0x22/0x4b
[ 4934.248731] [<ffffffffa02a8bad>] async_cow_start+0x35/0x53 [btrfs]
[ 4934.248731] [<ffffffffa02c694b>] worker_loop+0x14b/0x48c [btrfs]
[ 4934.248731] [<ffffffffa02c6800>] ? btrfs_queue_worker+0x25c/0x25c [btrfs]
[ 4934.248731] [<ffffffff810608f5>] kthread+0x8d/0x95
[ 4934.248731] [<ffffffff81060868>] ? kthread_freezable_should_stop+0x43/0x43
[ 4934.248731] [<ffffffff814fe09c>] ret_from_fork+0x7c/0xb0
[ 4934.248731] [<ffffffff81060868>] ? kthread_freezable_should_stop+0x43/0x43
[ 4934.248731] Code: ff 85 c0 0f 94 c0 0f b6 c0 59 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 41 54 53 48 89 fb e8 2c de 00 00 49 89 c4 48 8b 03 a8 01 75 02 <0f> 0b 4d 85 e4 74 52 49 8b 84 24 80 00 00 00 f6 40 20 01 75 44
[ 4934.248731] RIP [<ffffffff810f5093>] clear_page_dirty_for_io+0x1e/0x83
[ 4934.248731] RSP <ffff8801869f9c48>
[ 4934.280307] ---[ end trace 36f06d3f8750236a ]---
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If we crash with a log, remount and recover that log, and then crash before we
can commit another transaction we will get transid verify errors on the next
mount. This is because we were not zero'ing out the log when we committed the
transaction after recovery. This is ok as long as we commit another transaction
at some point in the future, but if you abort or something else goes wrong you
can end up in this weird state because the recovery stuff says that the tree log
should have a generation+1 of the super generation, which won't be the case of
the transaction that was started for recovery. Fix this by removing the check
and _always_ zero out the log portion of the super when we commit a transaction.
This fixes the transid verify issues I was seeing with my force errors tests.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Pull btrfs fixes from Chris Mason:
"These are mostly bug fixes and a two small performance fixes. The
most important of the bunch are Josef's fix for a snapshotting
regression and Mark's update to fix compile problems on arm"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits)
Btrfs: create the uuid tree on remount rw
btrfs: change extent-same to copy entire argument struct
Btrfs: dir_inode_operations should use btrfs_update_time also
btrfs: Add btrfs: prefix to kernel log output
btrfs: refuse to remount read-write after abort
Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0
Btrfs: don't leak transaction in btrfs_sync_file()
Btrfs: add the missing mutex unlock in write_all_supers()
Btrfs: iput inode on allocation failure
Btrfs: remove space_info->reservation_progress
Btrfs: kill delay_iput arg to the wait_ordered functions
Btrfs: fix worst case calculator for space usage
Revert "Btrfs: rework the overcommit logic to be based on the total size"
Btrfs: improve replacing nocow extents
Btrfs: drop dir i_size when adding new names on replay
Btrfs: replay dir_index items before other items
Btrfs: check roots last log commit when checking if an inode has been logged
Btrfs: actually log directory we are fsync()'ing
Btrfs: actually limit the size of delalloc range
Btrfs: allocate the free space by the existed max extent size when ENOSPC
...
Users have been complaining of the uuid tree stuff warning that there is no uuid
root when trying to do snapshot operations. This is because if you mount -o ro
we will not create the uuid tree. But then if you mount -o rw,remount we will
still not create it and then any subsequent snapshot/subvol operations you try
to do will fail gloriously. Fix this by creating the uuid_root on remount rw if
it was not already there. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data
back to it's argument struct. Unfortunately, not all architectures provide
__put_user_unaligned(), so compiles break on them if btrfs is selected.
Instead, just copy the whole struct in / out at the start and end of
operations, respectively.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Commit 2bc5565286 (Btrfs: don't update atime on
RO subvolumes) ensures that the access time of an inode is not updated when
the inode lives in a read-only subvolume.
However, if a directory on a read-only subvolume is accessed, the atime is
updated. This results in a write operation to a read-only subvolume. I
believe that access times should never be updated on read-only subvolumes.
To reproduce:
# mkfs.btrfs -f /dev/dm-3
(...)
# mount /dev/dm-3 /mnt
# btrfs subvol create /mnt/sub
Create subvolume '/mnt/sub'
# mkdir /mnt/sub/dir
# echo "abc" > /mnt/sub/dir/file
# btrfs subvol snapshot -r /mnt/sub /mnt/rosnap
Create a readonly snapshot of '/mnt/sub' in '/mnt/rosnap'
# stat /mnt/rosnap/dir
File: `/mnt/rosnap/dir'
Size: 8 Blocks: 0 IO Block: 4096 directory
Device: 16h/22d Inode: 257 Links: 1
Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2013-09-11 07:21:49.389157126 -0400
Modify: 2013-09-11 07:22:02.330156079 -0400
Change: 2013-09-11 07:22:02.330156079 -0400
# ls /mnt/rosnap/dir
file
# stat /mnt/rosnap/dir
File: `/mnt/rosnap/dir'
Size: 8 Blocks: 0 IO Block: 4096 directory
Device: 16h/22d Inode: 257 Links: 1
Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2013-09-11 07:22:56.797151670 -0400
Modify: 2013-09-11 07:22:02.330156079 -0400
Change: 2013-09-11 07:22:02.330156079 -0400
Reported-by: Koen De Wit <koen.de.wit@oracle.com>
Signed-off-by: Guangyu Sun <guangyu.sun@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The kernel log entries for device label %s and device fsid %pU
are missing the btrfs: prefix. Add those here.
Signed-off-by: Frank Holton <fholton@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It's still possible to flip the filesystem into RW mode after it's
remounted RO due to an abort. There are lots of places that check for
the superblock error bit and will not write data, but we should not let
the filesystem appear read-write.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default
subvolume by passing a subvolume id of 0.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Liu Bo