Tejun's "block: set rq->resid_len to blk_rq_bytes() on issue" patch
seems to be incomplete; It doesn't set rq->resid_len to blk_rq_bytes()
for a bidi request (req->next_rq). As a result, all bidi users are
broken.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
blk_queue_bounce_limit() is more than a wrapper about the request queue
limits.bounce_pfn variable. Introduce blk_queue_bounce_pfn() which can
be called by stacking drivers that wish to set the bounce limit
explicitly.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
I found one more mis-conversion to the 'request is always dequeued
when completing' model in elv_abort_queue() during code inspection.
Although I haven't hit any problem caused by this mis-conversion yet
and just done compile/boot test, please apply if you have no problem.
Request must be dequeued when it completes.
However, elv_abort_queue() completes requests without dequeueing.
This will cause oops in the __blk_end_request_all().
This patch fixes the oops.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Doing a bit of torture testing, I ran across a BUG in the block
subsystem (at blk-core.c:2048): the test for if the request is queued.
It turns out the trigger was a BLKPREP_KILL coming out of the SCSI prep
function. Currently for BLKPREP_KILL requests, we send them straight
into __blk_end_request_all() with an error, but they've never been
dequeued, so they trip the bug. Fix this by starting requests before
killing them.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
DM needs to use blk_stack_limits(), so it needs to be exported.
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The commit below in 2.6-block/for-2.6.31 causes no diskstat problem
because the blk_discard_rq() check was added with '&&'.
It should be 'blk_fs_request() || blk_discard_rq()'.
This patch does it and fixes the no diskstat problem.
Please review and apply.
------ /proc/diskstat without this patch -------------------------------------
8 0 sda 0 0 0 0 0 0 0 0 0 0 0
------------------------------------------------------------------------------
----- /proc/diskstat with this patch applied ---------------------------------
8 0 sda 4186 303 373621 61600 9578 3859 107468 169479 2 89755 231059
------------------------------------------------------------------------------
--------------------------------------------------------------------------
commit c69d48540c
Author: Jens Axboe <jens.axboe@oracle.com>
Date: Fri Apr 24 08:12:19 2009 +0200
block: include discard requests in IO accounting
We currently don't do merging on discard requests, but we potentially
could. If we do, then we need to include discard requests in the IO
accounting, or merging would end up decrementing in_flight IO counters
for an IO which never incremented them.
So enable accounting for discard requests.
<snip>
static inline int blk_do_io_stat(struct request *rq)
{
- return rq->rq_disk && blk_rq_io_stat(rq) && blk_fs_request(rq);
+ return rq->rq_disk && blk_rq_io_stat(rq) && blk_fs_request(rq) &&
+ blk_discard_rq(rq);
}
--------------------------------------------------------------------------
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
commit e8939a50466fd963eb1ba9118c34b9ffb7ff6aa6
Author: Tejun Heo <tj@kernel.org>
Date: Fri May 8 11:54:16 2009 +0900
block: implement and enforce request peek/start/fetch
Added a BUG_ON(blk_queued_rq(req)) to the top of blk_finish_req().
Unfortunately, this checks whether req->queuelist is empty. This list
is doing double duty both as the queue list and the tag list, so tagged
requests come in here with this not empty and boom (the tag list is
emptied by blk_queue_end_tag() lower down).
Fix this by moving the BUG_ON to below the end tag we also seem
vulnerable to this in blk_requeue_request() as well. I think all uses
of blk_queued_rq() need auditing because the check is clearly wrong in
the tagged case.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
To support devices with physical block sizes bigger than 512 bytes we
need to ensure proper alignment. This patch adds support for exposing
I/O topology characteristics as devices are stacked.
logical_block_size is the smallest unit the device can address.
physical_block_size indicates the smallest I/O the device can write
without incurring a read-modify-write penalty.
The io_min parameter is the smallest preferred I/O size reported by
the device. In many cases this is the same as the physical block
size. However, the io_min parameter can be scaled up when stacking
(RAID5 chunk size > physical block size).
The io_opt characteristic indicates the optimal I/O size reported by
the device. This is usually the stripe width for arrays.
The alignment_offset parameter indicates the number of bytes the start
of the device/partition is offset from the device's natural alignment.
Partition tools and MD/DM utilities can use this to pad their offsets
so filesystems start on proper boundaries.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Currently stacking devices do not have a queue directory in sysfs.
However, many of the I/O characteristics like sector size, maximum
request size, etc. are queue properties.
This patch enables the queue directory for MD/DM devices. The elevator
code has been modified to deal with queues that do not have an I/O
scheduler.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
To accommodate stacking drivers that do not have an associated request
queue we're moving the limits to a separate, embedded structure.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Convert all external users of queue limits to using wrapper functions
instead of poking the request queue variables directly.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case. The
sector size will be 4KB but the logical block size will remain
512-bytes. Hence we need to distinguish between the physical block size
and the logical ditto.
This patch renames hardsect_size to logical_block_size.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Add a note about how one needs to be careful when setting up these bio
chains.
Extracted from Boaz's updated patch.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
OSD was the last in-tree user of blk_rq_append_bio(). Now
that it is fixed blk_rq_append_bio is un-exported and
is only used internally by block layer.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
New block API:
given a struct bio allocates a new request. This is the parallel of
generic_make_request for BLOCK_PC commands users.
The passed bio may be a chained-bio. The bio is bounced if needed
inside the call to this member.
This is in the effort of un-exporting blk_rq_append_bio().
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
CC: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Use blk_rq_append_bio() internally instead of blk_rq_bio_prep()
so blk_rq_map_kern can be called multiple times, to map multiple
buffers.
This is in the effort to un-export blk_rq_append_bio()
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
In commit c3a4d78c58, while introducing
rq->resid_len, the default value of residue count was changed from
full count to zero. The conversion was done under the assumption that
when a request fails residue count wasn't defined. However, Boaz and
James pointed out that this wasn't true and the residue count should
be preserved for failed requests too.
This patchset restores the original behavior by setting rq->resid_len
to blk_rq_bytes(rq) on request start and restoring explicit clearing
in affected drivers. While at it, take advantage of the fact that
rq->resid_len is set to full count where applicable.
* ide-cd: rq->resid_len cleared on pc success
* mptsas: req->resid_len cleared on success
* sas_expander: rsp/req->resid_len cleared on success
* mpt2sas_transport: req->resid_len cleared on success
* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take
advantage of initial full count to simplify code
Boaz Harrosh spotted bug in resid_len initialization. Fixed as
suggested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Borislav Petkov <petkovbb@googlemail.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Current bio_vec array index out-of-bounds test within
__end_that_request_first() does not seem correct.
It checks bio->bi_idx against bio->bi_vcnt, but the subsequent code
uses idx (which is, bio->bi_idx + next_idx) as the array index into
bio_vec array. This means that the test really make sense only at
the first iteration of !(nr_bytes >=bio->bi_size) case (when next_idx
== zero). Fix this by replacing bio->bi_idx with idx.
(This patch applies to 2.6.30-rc4.)
Signed-off-by: Kazuhisa Ichikawa <ki@epsilou.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Let's put the completion related functions back to block/blk-core.c
where they have lived. We can also unexport blk_end_bidi_request() and
__blk_end_bidi_request(), which nobody uses.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Till now block layer allowed two separate modes of request execution.
A request is always acquired from the request queue via
elv_next_request(). After that, drivers are free to either dequeue it
or process it without dequeueing. Dequeue allows elv_next_request()
to return the next request so that multiple requests can be in flight.
Executing requests without dequeueing has its merits mostly in
allowing drivers for simpler devices which can't do sg to deal with
segments only without considering request boundary. However, the
benefit this brings is dubious and declining while the cost of the API
ambiguity is increasing. Segment based drivers are usually for very
old or limited devices and as converting to dequeueing model isn't
difficult, it doesn't justify the API overhead it puts on block layer
and its more modern users.
Previous patches converted all block low level drivers to dequeueing
model. This patch completes the API transition by...
* renaming elv_next_request() to blk_peek_request()
* renaming blkdev_dequeue_request() to blk_start_request()
* adding blk_fetch_request() which is combination of peek and start
* disallowing completion of queued (not started) requests
* applying new API to all LLDs
Renamings are for consistency and to break out of tree code so that
it's apparent that out of tree drivers need updating.
[ Impact: block request issue API cleanup, no functional change ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: unsik Kim <donari75@gmail.com>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Laurent Vivier <Laurent@lvivier.info>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Block low level drivers for some reason have been pretty good at
abusing block layer API. Especially struct request's fields tend to
get violated in all possible ways. Make it clear that low level
drivers MUST NOT access or manipulate rq->sector and rq->data_len
directly by prefixing them with double underscores.
This change is also necessary to break build of out-of-tree codes
which assume the previous block API where internal fields can be
manipulated and rq->data_len carries residual count on completion.
[ Impact: hide internal fields, block API change ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
struct request has had a few different ways to represent some
properties of a request. ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers. The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion. In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.
Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size. This is more convoluted than the hard_ case.
rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests. rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests. This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.
rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front. This is mainly used by drivers
which transfers data by walking request segment-by-segment. This
value always equals rq->bio->bi_size >> 9. However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.
In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs. With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly. Drop all the duplicates. Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length. Everything else is
defined in terms of these three and available only through accessors.
* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
now handles pc and fs requests equally other than rq->sector update.
This means that now pc requests can use partial completion too (no
in-kernel user yet tho).
* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
now uses byte count as the primary data length.
* blk_rq_pos() is now guranteed to be always correct. In-block users
converted.
* blk_rq_bytes() is now guaranteed to be always valid as is
blk_rq_sectors(). In-block users converted.
* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
More convenient one is used.
* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
pointer to request.
[ Impact: API cleanup, single way to represent one property of a request ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
With recent cleanups, there is no place where low level driver
directly manipulates request fields. This means that the 'hard'
request fields always equal the !hard fields. Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.
While at it, drop superflous blk_rq_pos() < 0 test in swim.c.
[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.
This is in preparation of request data length handling cleanup.
Geert : suggested adding const to struct request * parameter to accessors
Sergei : spotted error in patch description
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion. This duality creates some
headaches.
First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing. It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count. This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.
Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred. The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all. This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.
This patch adds rq->resid_len which is used only for residual count.
While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.
Boaz : spotted missing conversion in osd
Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape
[ Impact: cleanup residual count handling, report 0 resid by default ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
on a handful of tracing fixes present in .30-rc5-almost.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We currently don't do merging on discard requests, but we potentially
could. If we do, then we need to include discard requests in the IO
accounting, or merging would end up decrementing in_flight IO counters
for an IO which never incremented them.
So enable accounting for discard requests.
Problem found by Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We currently check for file system requests outside of blk_do_io_stat(rq),
but we may as well just include it.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Now that all block request data transfer is done via bio, rq->data
isn't used. Kill it.
While at it, make the roles of rq->special and buffer clear.
[ Impact: drop now unncessary field from struct request ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
There are many [__]blk_end_request() call sites which call it with
full request length and expect full completion. Many of them ensure
that the request actually completes by doing BUG_ON() the return
value, which is awkward and error-prone.
This patch adds [__]blk_end_request_all() which takes @rq and @error
and fully completes the request. BUG_ON() is added to to ensure that
this actually happens.
Most conversions are simple but there are a few noteworthy ones.
* cdrom/viocd: viocd_end_request() replaced with direct calls to
__blk_end_request_all().
* s390/block/dasd: dasd_end_request() replaced with direct calls to
__blk_end_request_all().
* s390/char/tape_block: tapeblock_end_request() replaced with direct
calls to blk_end_request_all().
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
rq->start_time was initialized in init_request_from_bio() so special
requests didn't have start_time set. This has been okay as start_time
has been used only for fs requests; however, there is no indication of
this actually is the case or not. Set rq->start_time in blk_rq_init()
and guarantee that all initialized rq's have its start_time set. This
improves consistency at virtually no cost and future changes will make
use of the timestamp for !bio requests.
[ Impact: rq->start_time is valid for all requests ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Request completion has gone through several changes and became a bit
messy over the time. Clean it up.
1. end_that_request_data() is a thin wrapper around
end_that_request_data_first() which checks whether bio is NULL
before doing anything and handles bidi completion.
blk_update_request() is a thin wrapper around
end_that_request_data() which clears nr_sectors on the last
iteration but doesn't use the bidi completion.
Clean it up by moving the initial bio NULL check and nr_sectors
clearing on the last iteration into end_that_request_data() and
renaming it to blk_update_request(), which makes blk_end_io() the
only user of end_that_request_data(). Collapse
end_that_request_data() into blk_end_io().
2. There are four visible completion variants - blk_end_request(),
__blk_end_request(), blk_end_bidi_request() and end_request().
blk_end_request() and blk_end_bidi_request() uses blk_end_request()
as the backend but __blk_end_request() and end_request() use
separate implementation in __blk_end_request() due to different
locking rules.
blk_end_bidi_request() is identical to blk_end_io(). Collapse
blk_end_io() into blk_end_bidi_request(), separate out request
update into internal helper blk_update_bidi_request() and add
__blk_end_bidi_request(). Redefine [__]blk_end_request() as thin
inline wrappers around [__]blk_end_bidi_request().
3. As the whole request issue/completion usages are about to be
modified and audited, it's a good chance to convert completion
functions return bool which better indicates the intended meaning
of return values.
4. The function name end_that_request_last() is from the days when it
was a public interface and slighly confusing. Give it a proper
internal name - blk_finish_request().
5. Add description explaning that blk_end_bidi_request() can be safely
used for uni requests as suggested by Boaz Harrosh.
The only visible behavior change is from #1. nr_sectors counts are
cleared after the final iteration no matter which function is used to
complete the request. I couldn't find any place where the code
assumes those nr_sectors counters contain the values for the last
segment and this change is good as it makes the API much more
consistent as the end result is now same whether a request is
completed using [__]blk_end_request() alone or in combination with
blk_update_request().
API further cleaned up per Christoph's suggestion.
[ Impact: cleanup, rq->*nr_sectors always updated after req completion ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>
With recent IDE updates, blk_end_request_callback() doesn't have any
user now. Kill it.
[ Impact: removal of unused convoluted interface ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Impact: code reorganization
elv_next_request() and elv_dequeue_request() are public block layer
interface than actual elevator implementation. They mostly deal with
how requests interact with block layer and low level drivers at the
beginning of rqeuest processing whereas __elv_next_request() is the
actual eleveator request fetching interface.
Move the two functions to blk-core.c. This prepares for further
interface cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reorder request completion functions such that
* All request completion functions are located together.
* Functions which are used by only one caller is put right above the
caller.
* end_request() is put after other completion functions but before
blk_update_request().
This change is for completion function cleanup which will follow.
[ Impact: cleanup, code reorganization ]
Signed-off-by: Tejun Heo <tj@kernel.org>
* In blk_rq_timed_out_timer(), else { if } to else if
* In blk_add_timer(), simplify if/else block
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
blk_insert_request() doesn't need to worry about REQ_SOFTBARRIER.
Don't set it. Combined with recent ide updates, REQ_SOFTBARRIER is
now only used in elevator proper and for discard requests.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
RQ_NOMERGE_FLAGS already clears defines which REQ flags aren't
mergeable. There is no reason to specify it superflously. It only
adds to confusion. Don't set REQ_NOMERGE for barriers and requests
with specific queueing directive. REQ_NOMERGE is now exclusively used
by the merging code.
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
blk_start_queueing() is identical to __blk_run_queue() except that it
doesn't check for recursion. None of the current users depends on
blk_start_queueing() running request_fn directly. Replace usages of
blk_start_queueing() with [__]blk_run_queue() and kill it.
[ Impact: removal of mostly duplicate interface function ]
Signed-off-by: Tejun Heo <tj@kernel.org>
__blk_run_queue wraps blk_invoke_request_fn() such that it
additionally removes plug and bails out early if the queue is empty.
Both extra operations have their own pending mechanisms and don't
cause any harm correctness-wise when they are done superflously.
The only user of blk_invoke_request_fn() being blk_start_queue(),
there isn't much reason to keep both functions around. Merge
blk_invoke_request_fn() into __blk_run_queue() and make
blk_start_queue() use __blk_run_queue() instead.
[ Impact: merge two subtly different internal functions ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Enable by default support for large devices and files (CONFIG_LBD):
- With 1TB disks being a commodity hardware it is quite easy to hit 2TB
limitation while building RAIDs etc. and many distros have been using
CONFIG_LBD=y by default already (at least Fedora 10 and openSUSE 11.1).
- This should also prevent a subtle ext4 filesystem compatibility issue:
mke2fs.ext4 defaults to creating filesystems with huge_files feature
enabled and such filesystems cannot be later mounted read-write on
machines with CONFIG_LBD=n (it should be quite easy to hit this issue
when trying to use filesystem created using distro kernel on system
running the self-build kernel, think about USB disk enclosures & co.).
While at it:
- Clarify config option help text w.r.t. mounting ext4 filesystems
(they can be mounted with CONFIG_LBD=n but in the read-only mode).
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Impact: subtle behavior change
For fs requests, rq is only carrier of bios and rq error status as a
whole doesn't mean much. This is the reason why rq->errors is being
cleared on each partial completion of a request as on each partial
completion the error status is transferred to the respective bios.
For pc requests, rq->errors is used to carry error status to the
issuer and thus __end_that_request_first() doesn't clear it on such
cases.
The condition was fine till now as only fs and pc requests have used
bio and thus the bio completion path. However, future changes will
unify data accesses to bio and all non fs users care about rq error
status. Clear rq->errors on bio completion only for fs requests.
In general, the implicit clearing is a bit too subtle especially as
the meaning of rq->errors is completely dependent on low level
drivers. Unifying / cleaning up rq->errors usage and letting llds
manage it would be better. TODO comment added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.
Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
cfq_prio_tree_lookup() should return the direct match, yet it always
returns zero. Fix that.
cfq_prio_tree_add() assumes that we don't get a direct match, while
it is very possible that we do. Using O_DIRECT, you can have different
cfqq with matching requests, since you don't have the page cache
to serialize things for you. Fix this bug by only adding the cfqq if
there isn't an existing match.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Very rarely under stress testing of dm, oopses are occuring as
something tampers with an old stack frame. This has been traced back
to blk_abort_queue() leaving a timeout_list pointing to the stack.
The reason is that sometimes blk_abort_request() won't delete the
timer (if the request is marked as complete but before the timer has
been removed, a small race window). Fix this by splicing back from
the ususally empty list to the q->timeout_list.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.
Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
If the cfq io context doesn't have enough samples yet to provide a mean
seek distance, then use the default threshold we have for seeky IO instead
of defaulting to 0.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Right now, depending on the first sector to which a process issues I/O,
the seek time may start out way out of whack. So make sure we start
with 0 sectors in seek, instead of the offset of the first request
issued.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
/proc/diskstats used to show stats for all disks whether they're
zero-sized or not and their non-zero partitions. Commit
074a7aca7a accidentally changed the
behavior such that it doesn't print out zero sized disks. This patch
implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and
uses it in diskstats_show() such that empty part0 is shown in
/proc/diskstats.
Reported and bisectd by Dianel Collins.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Collins <solemnwarning@solemnwarning.no-ip.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily
All DMA address limits are expressed in terms of the last addressable
unit (byte or page) instead of one plus that. However, when
determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(),
it compares the specified limit against 0x100000000UL to determine
whether it's below 4G ending up falsely setting GFP_DMA in
q->bounce_gfp.
As DMA zone is very small on x86_64, this makes larger SG_IO transfers
very eager to trigger OOM killer. Fix it. While at it, rename the
parameter to @dma_mask for clarity and convert comment to proper
winged style.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Impact: fix SG_IO behavior such that it matches the documentation
SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the
shorter one wins. However, the current implementation returns -EINVAL
for such cases. Trim iovc if it's longer than ->dxfer_len.
This patch uses iov_*() helpers which take struct iovec * by casting
struct sg_iovec * to it. sg_iovec is always identical to iovec and
this will be further cleaned up with later patches.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Impact: subtle behavior change
For fs requests, rq is only carrier of bios and rq error status as a
whole doesn't mean much. This is the reason why rq->errors is being
cleared on each partial completion of a request as on each partial
completion the error status is transferred to the respective bios.
For pc requests, rq->errors is used to carry error status to the
issuer and thus __end_that_request_first() doesn't clear it on such
cases.
The condition was fine till now as only fs and pc requests have used
bio and thus the bio completion path. However, future changes will
unify data accesses to bio and all non fs users care about rq error
status. Clear rq->errors on bio completion only for fs requests.
In general, the implicit clearing is a bit too subtle especially as
the meaning of rq->errors is completely dependent on low level
drivers. Unifying / cleaning up rq->errors usage and letting llds
manage it would be better. TODO comment added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Though one can specify '-d /dev/sda1' when using blktrace, it still
traces the whole sda.
To support per-partition tracing, when we start tracing, we initialize
bt->start_lba and bt->end_lba to the start and end sector of that
partition.
Note some actions are per device, thus we don't filter 0-sector events.
The original patch and discussion can be found here:
http://marc.info/?l=linux-btrace&m=122949374214540&w=2
Signed-off-by: Shawn Du <duyuyang@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
LKML-Reference: <49E42620.4050701@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we have processes that are working in close proximity to each
other on disk, we don't want to idle wait. Instead allow the close
process to issue a request, getting better aggregate bandwidth.
The anticipatory scheduler has similar checks, noop and deadline do
not need it since they don't care about process <-> io mappings.
The code for CFQ is a little more involved though, since we split
request queues into per-process contexts.
This fixes a performance problem with eg dump(8), since it uses
several processes in some silly attempt to speed IO up. Even if
dump(8) isn't really a valid case (it should be fixed by using
CLONE_IO), there are other cases where we see close processes
and where idling ends up hurting performance.
Credit goes to Jeff Moyer <jmoyer@redhat.com> for writing the
initial implementation.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We only kick the dispatch for an idling queue, if we think it's a
(somewhat) fully merged request. Also allow a kick if we have other
busy queues in the system, since we don't want to risk waiting for
a potential merge in that case. It's better to get some work done and
proceed.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
It's called from the workqueue handlers from process context, so
we always have irqs enabled when entered.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
blk_rq_unmap_user() returns -EFAULT if a program passes an invalid
address to kernel. SG_IO path needs to pass the returned value to user
space instead of ignoring it.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
"Zhang, Yanmin" <yanmin_zhang@linux.intel.com> reports that commit
b029195dda introduced a regression
of about 50% with sequential threaded read workloads. The test
case is:
tiotest -k0 -k1 -k3 -f 80 -t 32
which starts 32 threads each reading a 80MB file. Twiddle the kick
queue logic so that we do start IO immediately, if it appears to be
a fully merged request. We can't really detect that, so just check
if the request is bigger than a page or not. The assumption is that
since single bio issues will first queue a single request with just
one page attached and then later do merges on that, if we already
have more than a page worth of data in the request, then the request
is most likely good to go.
Verified that this doesn't cause a regression with the test case that
commit b029195dda was fixing. It does not,
we still see maximum sized requests for the queue-then-merge cases.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y
branch tracer: Fix for enabling branch profiling makes sparse unusable
ftrace: Correct a text align for event format output
Update /debug/tracing/README
tracing/ftrace: alloc the started cpumask for the trace file
tracing, x86: remove duplicated #include
ftrace: Add check of sched_stopped for probe_sched_wakeup
function-graph: add proper initialization for init task
tracing/ftrace: fix missing include string.h
tracing: fix incorrect return type of ns2usecs()
tracing: remove CALLER_ADDR2 from wakeup tracer
blktrace: fix pdu_len when tracing packet command requests
blktrace: small cleanup in blk_msg_write()
blktrace: NUL-terminate user space messages
tracing: move scripts/trace/power.pl to scripts/tracing/power.pl
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
loop: mutex already unlocked in loop_clr_fd()
cfq-iosched: don't let idling interfere with plugging
block: remove unused REQ_UNPLUG
cfq-iosched: kill two unused cfqq flags
cfq-iosched: change dispatch logic to deal with single requests at the time
mflash: initial support
cciss: change to discover first memory BAR
cciss: kernel scan thread for MSA2012
cciss: fix residual count for block pc requests
block: fix inconsistency in I/O stat accounting code
block: elevator quiescing helpers
When CFQ is waiting for a new request from a process, currently it'll
immediately restart queuing when it sees such a request. This doesn't
work very well with streamed IO, since we then end up splitting IO
that would otherwise have been merged nicely. For a simple dd test,
this causes 10x as many requests to be issued as we should have.
Normally this goes unnoticed due to the low overhead of requests
at the device side, but some hardware is very sensitive to request
sizes and there it can cause big slow downs.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The request inherits the unplug flag from the bio, but it isn't actually
used. The bio flag stops at __make_request(), which tells it to unplug
after submission. Passing it on to the request doesn't make any sense.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We only manipulate the must_dispatch and queue_new flags, they are not
tested anymore. So get rid of them.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The IO scheduler core calls into the IO scheduler dispatch_request hook
to move requests from the IO scheduler and into the driver dispatch
list. It only does so when the dispatch list is empty. CFQ moves several
requests to the dispatch list, which can cause higher latencies if we
suddenly have to switch to some important sync IO. Change the logic to
move one request at the time instead.
This should almost be functionally equivalent to what we did before,
except that we now honor 'quantum' as the maximum queue depth at the
device side from any single cfqq. If there's just a single active
cfqq, we allow up to 4 times the normal quantum.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This forces in_flight to be zero when turning off or on the I/O stat
accounting and stops updating I/O stats in attempt_merge() when
accounting is turned off.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Simple helper functions to quiesce the request queue. These are
currently only used for switching IO schedulers on-the-fly, but
we can use them to properly switch IO accounting on and off as well.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Fix a typo (this was in the original patch but was not merged when the code
fixes were for some reason)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
By default, CFQ will anticipate more IO from a given io context if the
previously completed IO was sync. This used to be fine, since the only
sync IO was reads and O_DIRECT writes. But with more "normal" sync writes
being used now, we don't want to anticipate for those.
Add a bio/request flag that informs the IO scheduler that this is a sync
request that we should not idle for. Introduce WRITE_ODIRECT specifically
for O_DIRECT writes, and make sure that the other sync writes set this
flag.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For the older SSD devices that don't do command queuing, we do want to
enable plugging to get better merging.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes sure that we never wait on async IO for sync requests, instead
of doing the split on writes vs reads.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
tracing, net: fix net tree and tracing tree merge interaction
tracing, powerpc: fix powerpc tree and tracing tree interaction
ring-buffer: do not remove reader page from list on ring buffer free
function-graph: allow unregistering twice
trace: make argument 'mem' of trace_seq_putmem() const
tracing: add missing 'extern' keywords to trace_output.h
tracing: provide trace_seq_reserve()
blktrace: print out BLK_TN_MESSAGE properly
blktrace: extract duplidate code
blktrace: fix memory leak when freeing struct blk_io_trace
blktrace: fix blk_probes_ref chaos
blktrace: make classic output more classic
blktrace: fix off-by-one bug
blktrace: fix the original blktrace
blktrace: fix a race when creating blk_tree_root in debugfs
blktrace: fix timestamp in binary output
tracing, Text Edit Lock: cleanup
tracing: filter fix for TRACE_EVENT_FORMAT events
ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
x86: kretprobe-booster interrupt emulation code fix
...
Fix up trivial conflicts in
arch/parisc/include/asm/ftrace.h
include/linux/memory.h
kernel/extable.c
kernel/module.c
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
cpumask: remove cpumask allocation from idle_balance, fix
numa, cpumask: move numa_node_id default implementation to topology.h, fix
cpumask: remove cpumask allocation from idle_balance
x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
x86: microcode: cleanup
x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
numa, cpumask: move numa_node_id default implementation to topology.h
cpumask: convert node_to_cpumask_map[] to cpumask_var_t
cpumask: remove x86 cpumask_t uses.
cpumask: use cpumask_var_t in uv_flush_tlb_others.
cpumask: remove cpumask_t assignment from vector_allocation_domain()
cpumask: make Xen use the new operators.
cpumask: clean up summit's send_IPI functions
cpumask: use new cpumask functions throughout x86
x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
cpumask: convert node_to_cpumask_map[] to cpumask_var_t
x86: unify 32 and 64-bit node_to_cpumask_map
...
* 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
s390: remove arch specific smp_send_stop()
panic: clean up kernel/panic.c
panic, smp: provide smp_send_stop() wrapper on UP too
panic: decrease oops_in_progress only after having done the panic
generic-ipi: eliminate WARN_ON()s during oops/panic
generic-ipi: cleanups
generic-ipi: remove CSD_FLAG_WAIT
generic-ipi: remove kmalloc()
generic IPI: simplify barriers and locking
Impact: output all of packet commands - not just the first 4 / 8 bytes
Since commit d7e3c3249e ("block: add
large command support"), struct request->cmd has been changed from
unsinged char cmd[BLK_MAX_CDB] to unsigned char *cmd.
v1 -> v2: by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
- make sure rq->cmd_len is always intialized, and then we can use
rq->cmd_len instead of BLK_MAX_CDB.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
LKML-Reference: <49D4507E.2060602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits)
percpu: fix spurious alignment WARN in legacy SMP percpu allocator
percpu: generalize embedding first chunk setup helper
percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk()
percpu: make x86 addr <-> pcpu ptr conversion macros generic
linker script: define __per_cpu_load on all SMP capable archs
x86: UV: remove uv_flush_tlb_others() WARN_ON
percpu: finer grained locking to break deadlock and allow atomic free
percpu: move fully free chunk reclamation into a work
percpu: move chunk area map extension out of area allocation
percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free()
x86, percpu: setup reserved percpu area for x86_64
percpu, module: implement reserved allocation and use it for module percpu variables
percpu: add an indirection ptr for chunk page map access
x86: make embedding percpu allocator return excessive free space
percpu: use negative for auto for pcpu_setup_first_chunk() arguments
percpu: improve first chunk initial area map handling
percpu: cosmetic renames in pcpu_setup_first_chunk()
percpu: clean up percpu constants
x86: un-__init fill_pud/pmd/pte
x86: remove vestigial fix_ioremap prototypes
...
Manually merge conflicts in arch/ia64/kernel/irq_ia64.c
bsg submits REQ_TYPE_BLOCK_PC so the right check is max_hw_sectors.
But I've removed this check because right after, bsg proceeds with
calling blk_rq_map_user() which does all the right checks.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Put a WARN_ON in __blk_put_request if it is about to
leak bio(s). This is a serious bug that can happen in error
handling code paths.
For this to work I have fixed a couple of places in block/ where
request->bio != NULL ownership was not honored. And a small cleanup
at sg_io() while at it.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Currently inherited from sg.c bsg will submit asynchronous request
at the head-of-the-queue, (using "at_head" set in the call to
blk_execute_rq_nowait()). This is bad in situation where the queues
are full, requests will execute out of order, and can cause
starvation of the first submitted requests.
The sg_io_v4->flags member is used and a bit is allocated to denote the
Q_AT_TAIL. Zero is to queue at_head as before, to be compatible with old
code at the write/read path. SG_IO code path behavior was changed so to
be the same as write/read behavior. SG_IO was very rarely used and breaking
compatibility with it is OK at this stage.
sg_io_hdr at sg.h also has a flags member and uses 3 bits from the first
nibble and one bit from the last nibble. Even though none of these bits
are supported by bsg, The second nibble is allocated for use by bsg. Just
in case.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
CC: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Impact: cleanup
This is presumably what those definitions are for, and while all archs
define cpu_core_map/cpu_sibling map, that's changing (eg. x86 wants to
change it to a pointer).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows it to compile and be used on the ps3 platform that wants
to use the #define values in scsi.h without actually having
CONFIG_SCSI set.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Commit 1e42807918 introduced a bug where we
don't get front/back segment sizes in the bio in blk_recount_segments().
Fix this by tracking the back bio as well as the front bio in
__blk_recalc_rq_segments(), this also cleans up the interface by getting
rid of the segment size pointer passing.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Add documentation for register_blkdev() function and for the parameters.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Oleg noticed that we don't strictly need CSD_FLAG_WAIT, rework
the code so that we can use CSD_FLAG_LOCK for both purposes.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This prepares for a real __alloc_percpu, by adding an alignment argument.
Only one place uses __alloc_percpu directly, and that's for a string.
tj: af_inet also uses __alloc_percpu(), update it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
blk_abort_queue() iterates the timeout list and aborts each request on the
list, but if the driver error handling readds a request to the timeout list
during this processing, we could be looping forever. Fix this by splicing
current entries to a local list and run over that list instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Hi Tejun,
it looks like your commit:
block: don't depend on consecutive minor space
f331c0296f
broke a particular case for booting from partitioned md/raid devices.
That is the second time this has been broken recently. The previous
time was fixed by
block: do_mounts - accept root=<non-existant partition>
30f2f0eb4b
Because the data isn't available when an md device is first created
(we add disks and set it up after creation), the initial partition
scan finds nothing. It is not until the device is opened that
another partition scan happens and finds something.
So at the point where the kernel parameter "root=/dev/md_d0p1" is
being parsed, md_d0 exists, but md_d0p1 does not.
However if we let blk_lookup_devt return the correct device number
even though the device doesn't exist, then the attempt to mount it
will successfully find the partition.
I have tried in the past to find a way to get the partition table to
be read as soon as the array is assembled but that proved impossible
(at the time). I don't remember the details, and could possibly
revisit it. However it would be really nice if blk_lookup_devt
could be adjusted to again accept non existant partitions.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO
and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before
213d9417fe.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
When submitting requests via SG_IO, which does a sync io, a
bsg_command is not allocated. So an in-Kernel sense_buffer was not
set. However when calling blk_execute_rq() with no sense buffer
one is provided from the stack. Now bsg at blk_complete_sgv4_hdr_rq()
would check if rq->sense_len and a sense was requested by sg_io_v4
the rq->sense was copy_user() back, but by now it is already mangled
stack memory.
I have fixed that by forcing a sense_buffer when calling bsg_map_hdr().
The bsg_command->sense is provided in the write/read path like before,
and on-the-stack buffer is provided when doing SG_IO.
I have also fixed a dprintk message to print rq->errors in hex because
of the scsi bit-field use of this member. For other block devices it
does not matter anyway.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Impact: cleanup
To make it easy for ftrace plugin writers, as this was open coded in
the existing plugins
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new API
These new functions do what previously was being open coded, reducing
the number of details ftrace plugin writers have to worry about.
It also standardizes the handling of stacktrace, userstacktrace and
other trace options we may introduce in the future.
With this patch, for instance, the blk tracer (and some others already
in the tree) can use the "userstacktrace" /d/tracing/trace_options
facility.
$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
trace_vprintk | -5
trace_graph_return | -22
trace_graph_entry | -26
trace_function | -45
__ftrace_trace_stack | -27
ftrace_trace_userstack | -29
tracing_sched_switch_trace | -66
tracing_stop | +1
trace_seq_to_user | -1
ftrace_trace_special | -63
ftrace_special | +1
tracing_sched_wakeup_trace | -70
tracing_reset_online_cpus | -1
13 functions changed, 2 bytes added, 355 bytes removed, diff: -353
linux-2.6-tip/block/blktrace.c:
__blk_add_trace | -58
1 function changed, 58 bytes removed, diff: -58
linux-2.6-tip/kernel/trace/trace.c:
trace_buffer_lock_reserve | +88
trace_buffer_unlock_commit | +86
2 functions changed, 174 bytes added, diff: +174
/tmp/vmlinux.after:
16 functions changed, 176 bytes added, 413 bytes removed, diff: -237
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: simplification of tracers
As all tracers are doing this we might as well do it in
register_ftrace_event and save one branch each time we call these
callbacks.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As they actually all return these enumerators.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: bugfix and cleanup
Some callsites were returning either TRACE_ITER_PARTIAL_LINE if the
trace_seq routines (trace_seq_printf, etc) returned 0 meaning its buffer
was full, or zero otherwise.
But...
/* Return values for print_line callback */
enum print_line_t {
TRACE_TYPE_PARTIAL_LINE = 0, /* Retry after flushing the seq */
TRACE_TYPE_HANDLED = 1,
TRACE_TYPE_UNHANDLED = 2 /* Relay to other output functions */
};
In other cases the return value was not being relayed at all.
Most of the time it didn't hurt because the page wasn't get filled, but
for correctness sake, handle the return values everywhere.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new feature
With this and a blkrawverify modified not to verify the sequence numbers
we can start using the userspace tools to verify that the data produced
with the ftrace plugin works as expected.
Example:
[root@f10-1 ~]# echo 1 > /sys/block/sda/sda1/trace/enable
[root@f10-1 ~]# echo bin > /d/tracing/trace_options
[root@f10-1 ~]# echo blk > /d/tracing/current_tracer
[root@f10-1 ~]# cat /d/tracing/trace_pipe > sda1.blktrace.0
^C
[root@f10-1 ~]# ./blkrawverify --noseq sda1
Verifying sda1
CPU 0
Wrote output to sda1.verify.out
[root@f10-1 ~]# cat sda1.verify.out
---------------
Verifying sda1
---------------------
Summary for cpu 0:
1349 valid + 0 invalid (100.0%) processed
[root@f10-1 ~]#
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: API change
The trace_seq and trace_entry are in trace_iterator, where there are
more fields that may be needed by tracers, so just pass the
tracer_iterator as is already the case for struct tracer->print_line.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some initial probe requests don't have disk->queue mapped yet, so we
can't rely on a non-NULL queue in blk_queue_io_stat(). Wrap it in
blk_do_io_stat().
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch adds the ability to pre-empt an ongoing BE timeslice when a RT
request is waiting for the current timeslice to complete. This reduces the
wait time to disk for RT requests from an upper bound of 4 (current value
of cfq_quantum) to 1 disk request.
Applied Jens' suggeested changes to avoid the rb lookup and use !cfq_class_rt()
and retested.
Latency(secs) for the RT task when doing sequential reads from 10G file.
| only RT | RT + BE | RT + BE + this patch
small (512 byte) reads | 143 | 163 | 145
large (1Mb) reads | 142 | 158 | 146
Signed-off-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This allows us to turn off disk stat accounting completely, for the cases
where the 0.5-1% reduction in system time is important.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This fixes a "regression" from 2.6.28, where the barrier probes that file
systems may do would trigger additional end request warnings in dmesg.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
For some devices (i.e. CFA ATA) we can't reliably detect whether
the device is of rotational or non-rotational type so we need to
leave the final decision about this setting to the user-space.
As a bonus do a minor CodingStyle fixup in queue_nomerges_store().
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Allow a block device to allocate and register an integrity profile
without providing a template. This allows DM to preallocate a profile
to avoid deadlocks during table reconfiguration.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Impact: cleanup
Use tracing_reset_online_cpus instead of open coding it.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
Also mention in the help text that blktrace now can be used using
the ftrace interface.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: New way of using the blktrace infrastructure
This drops the requirement of userspace utilities to use the blktrace
facility.
Configuration is done thru sysfs, adding a "trace" directory to the
partition directory where blktrace can be enabled for the associated
request_queue.
The same filters present in the IOCTL interface are present as sysfs
device attributes.
The /sys/block/sdX/sdXN/trace/enable file allows tracing without any
filters.
The other files in this directory: pid, act_mask, start_lba and end_lba
can be used with the same meaning as with the IOCTL interface.
Using the sysfs interface will only setup the request_queue->blk_trace
fields, tracing will only take place when the "blk" tracer is selected
via the ftrace interface, as in the following example:
To see the trace, one can use the /d/tracing/trace file or the
/d/tracign/trace_pipe file, with semantics defined in the ftrace
documentation in Documentation/ftrace.txt.
[root@f10-1 ~]# cat /t/trace
kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304
kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald]
kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald]
kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald]
kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald]
kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald]
kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1
<idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367]
[root@f10-1 ~]#
The default line context (prefix) format is the one described in the ftrace
documentation, with the blktrace specific bits using its existing format,
described in blkparse(8).
If one wants to have the classic blktrace formatting, this is possible by
using:
[root@f10-1 ~]# echo blk_classic > /t/trace_options
[root@f10-1 ~]# cat /t/trace
8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304
8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald]
8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald]
8,1 0 3046.491239 305 P NS [kjournald]
8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald]
8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald]
8,1 0 3046.491610 305 U WS [kjournald] 1
8,1 0 3046.511914 0 C RS 6367 + 8 [6367]
[root@f10-1 ~]#
Using the ftrace standard format allows more flexibility, such
as the ability of asking for backtraces via trace_options:
[root@f10-1 ~]# echo noblk_classic > /t/trace_options
[root@f10-1 ~]# echo stacktrace > /t/trace_options
[root@f10-1 ~]# cat /t/trace
kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312
kjournald-305 [000] 3318.826782:
<= submit_bio
<= submit_bh
<= sync_dirty_buffer
<= journal_commit_transaction
<= kjournald
<= kthread
<= child_rip
kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald]
kjournald-305 [000] 3318.826837:
<= generic_make_request
<= submit_bio
<= submit_bh
<= sync_dirty_buffer
<= journal_commit_transaction
<= kjournald
<= kthread
Please read the ftrace documentation to use aditional, standardized
tracing filters such as /d/tracing/trace_cpumask, etc.
See also /d/tracing/trace_mark to add comments in the trace stream,
that is equivalent to the /d/block/sdaN/msg interface.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
ext4: Remove "extents" mount option
block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
ext4: Make printk's consistently prefixed with "EXT4-fs: "
ext4: Add sanity checks for the superblock before mounting the filesystem
ext4: Add mount option to set kjournald's I/O priority
jbd2: Submit writes to the journal using WRITE_SYNC
jbd2: Add pid and journal device name to the "kjournald2 starting" message
ext4: Add markers for better debuggability
ext4: Remove code to create the journal inode
ext4: provide function to release metadata pages under memory pressure
ext3: provide function to release metadata pages under memory pressure
add releasepage hooks to block devices which can be used by file systems
ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
ext4: Init the complete page while building buddy cache
ext4: Don't allow new groups to be added during block allocation
ext4: mark the blocks/inode bitmap beyond end of group as used
ext4: Use new buffer_head flag to check uninit group bitmaps initialization
ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
ext4: code cleanup
...
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits)
[SCSI] qla2xxx: Update version number to 8.03.00-k1.
[SCSI] qla2xxx: Add ISP81XX support.
[SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.
[SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump.
[SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.
[SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages.
[SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled.
[SCSI] qla2xxx: Remove support for reading/writing HW-event-log.
[SCSI] cxgb3i: add missing include
[SCSI] scsi_lib: fix DID_RESET status problems
[SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD
[SCSI] aha152x_cs: Fix regression that keeps driver from using shared interrupts
[SCSI] sd: Correctly handle 6-byte commands with DIX
[SCSI] sd: DIF: Fix tagging on platforms with signed char
[SCSI] sd: DIF: Show app tag on error
[SCSI] Fix error handling for DIF/DIX
[SCSI] scsi_lib: don't decrement busy counters when inserting commands
[SCSI] libsas: fix test for negative unsigned and typos
[SCSI] a2091, gvp11: kill warn_unused_result warnings
[SCSI] fusion: Move a dereference below a NULL test
...
Fixed up trivial conflict due to moving the async part of sd_probe
around in the async probes vs using dev_set_name() in naming.
The commit 818827669d (block: make
blk_rq_map_user take a NULL user-space buffer) extended
blk_rq_map_user to accept a NULL user-space buffer with a READ
command. It was necessary to convert sg to use the block layer mapping
API.
This patch extends blk_rq_map_user again for a WRITE command. It is
necessary to convert st and osst drivers to use the block layer
apping API.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Jens Axboe