This tag contains the patches I'd like to target for 5.7. It has a handful of
new features:
* Partial support for the Kendryte K210. There are still a few outstanding
issues that I have patches for, but I don't actually have a board to test
them so they're not included yet.
* SBI v0.2 support.
* Fixes to support for building with LLVM-based toolchains. The resulting
images are known not to boot yet.
This builds and boots for me. There is one merge conflict, it's just a Kconfig
merge issue. I can publish a resolved branch if you'd like.
I don't anticipate a part two, but I'll probably have something early in the
RCs to finish up the K210 support.
-----BEGIN PGP SIGNATURE-----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=P1DO
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of new features:
- Partial support for the Kendryte K210.
There are still a few outstanding issues that I have patches for,
but I don't actually have a board to test them so they're not
included yet.
- SBI v0.2 support.
- Fixes to support for building with LLVM-based toolchains. The
resulting images are known not to boot yet.
I don't anticipate a part two, but I'll probably have something early
in the RCs to finish up the K210 support"
* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
riscv: create a loader.bin boot image for Kendryte SoC
riscv: Kendryte K210 default config
riscv: Add Kendryte K210 device tree
riscv: Select required drivers for Kendryte SOC
riscv: Add Kendryte K210 SoC support
riscv: Add SOC early init support
riscv: Unaligned load/store handling for M_MODE
RISC-V: Support cpu hotplug
RISC-V: Add supported for ordered booting method using HSM
RISC-V: Add SBI HSM extension definitions
RISC-V: Export SBI error to linux error mapping function
RISC-V: Add cpu_ops and modify default booting method
RISC-V: Move relocate and few other functions out of __init
RISC-V: Implement new SBI v0.2 extensions
RISC-V: Introduce a new config for SBI v0.1
RISC-V: Add SBI v0.2 extension definitions
RISC-V: Add basic support for SBI v0.2
RISC-V: Mark existing SBI as 0.1 SBI.
riscv: Use macro definition instead of magic number
riscv: Add support to dump the kernel page tables
...
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Add a mechanism for early SoC initialization for platforms that need
additional hardware initialization not possible through the regular
device tree and drivers mechanism. With this, a SoC specific
initialization function can be called very early, before DTB parsing
is done by parse_dtb() in Linux RISC-V kernel setup code.
This can be very useful for early hardware initialization for No-MMU
kernels booted directly in M-mode because it is quite likely that no
other booting stage exist prior to the No-MMU kernel.
Example use of a SoC early initialization is as follows:
static void vendor_abc_early_init(const void *fdt)
{
/*
* some early init code here that can use simple matches
* against the flat device tree file.
*/
}
SOC_EARLY_INIT_DECLARE("vendor,abc", abc_early_init);
This early initialization function is executed only if the flat device
tree for the board has a 'compatible = "vendor,abc"' entry;
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add handlers for unaligned load and store traps that may be generated
by applications. Code heavily inspired from the OpenSBI project.
Handling of the unaligned access traps is suitable for applications
compiled with or without compressed instructions and is independent of
the kernel CONFIG_RISCV_ISA_C option value.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, all harts have to jump Linux in RISC-V. This complicates the
multi-stage boot process as every transient stage also has to ensure all
harts enter to that stage and jump to Linux afterwards. It also obstructs
a clean Kexec implementation.
SBI HSM extension provides alternate solutions where only a single hart
need to boot and enter Linux. The booting hart can bring up secondary
harts one by one afterwards.
Add SBI HSM based cpu_ops that implements an ordered booting method in
RISC-V. This change is also backward compatible with older firmware not
implementing HSM extension. If a latest kernel is used with older
firmware, it will continue to use the default spinning booting method.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
All SBI related extensions will not be implemented in sbi.c to avoid
bloating. Thus, sbi_err_map_linux_errno() will be used in other files
implementing that specific extension.
Export the function so that it can be used later.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, all non-booting harts start booting after the booting hart
updates the per-hart stack pointer. This is done in a way that, it's
difficult to implement any other booting method without breaking the
backward compatibility.
Define a cpu_ops method that allows to introduce other booting methods
in future. Modify the current booting method to be compatible with
cpu_ops.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The secondary hart booting and relocation code are under .init section.
As a result, it will be freed once kernel booting is done. However,
ordered booting protocol and CPU hotplug always requires these functions
to be present to bringup harts after initial kernel boot.
Move the required functions to a different section and make sure that
they are in memory within first 2MB offset as trampoline page directory
only maps first 2MB.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Few v0.1 SBI calls are being replaced by new SBI calls that follows v0.2
calling convention.
Implement the replacement extensions and few additional new SBI function calls
that makes way for a better SBI interface in future.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We now have SBI v0.2 which is more scalable and extendable to handle
future needs for RISC-V supervisor interfaces.
Introduce a new config and move all SBI v0.1 code under that config.
This allows to implement the new replacement SBI extensions cleanly
and remove v0.1 extensions easily in future. Currently, the config
is enabled by default. Once all M-mode software, with v0.1, is no
longer in use, this config option and all relevant code can be easily
removed.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The SBI v0.2 introduces a base extension which is backward compatible
with v0.1. Implement all helper functions and minimum required SBI
calls from v0.2 for now. All other base extension function will be
added later as per need.
As v0.2 calling convention is backward compatible with v0.1, remove
the v0.1 helper functions and just use v0.2 calling convention.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Treewide:
- Cleanup of setup_irq() which is not longer required because the
memory allocator is available early. Most cleanup changes come
through the various maintainer trees, so the final removal of
setup_irq() is postponed towards the end of the merge window.
Core:
- Protection against unsafe invocation of interrupt handlers and unsafe
interrupt injection including a fixup of the offending PCI/AER error
injection mechanism.
Invoking interrupt handlers from arbitrary contexts, i.e. outside of
an actual interrupt, can cause inconsistent state on the fragile
x86 interrupt affinity changing hardware trainwreck.
Drivers:
- Second wave of support for the new ARM GICv4.1
- Multi-instance support for Xilinx and PLIC interrupt controllers
- CPU-Hotplug support for PLIC
- The obligatory new driver for X1000 TCU
- Enhancements, cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=DZ/G
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Treewide:
- Cleanup of setup_irq() which is not longer required because the
memory allocator is available early.
Most cleanup changes come through the various maintainer trees, so
the final removal of setup_irq() is postponed towards the end of
the merge window.
Core:
- Protection against unsafe invocation of interrupt handlers and
unsafe interrupt injection including a fixup of the offending
PCI/AER error injection mechanism.
Invoking interrupt handlers from arbitrary contexts, i.e. outside
of an actual interrupt, can cause inconsistent state on the
fragile x86 interrupt affinity changing hardware trainwreck.
Drivers:
- Second wave of support for the new ARM GICv4.1
- Multi-instance support for Xilinx and PLIC interrupt controllers
- CPU-Hotplug support for PLIC
- The obligatory new driver for X1000 TCU
- Enhancements, cleanups and fixes all over the place"
* tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
unicore32: Replace setup_irq() by request_irq()
sh: Replace setup_irq() by request_irq()
hexagon: Replace setup_irq() by request_irq()
c6x: Replace setup_irq() by request_irq()
alpha: Replace setup_irq() by request_irq()
irqchip/gic-v4.1: Eagerly vmap vPEs
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/stm32: Retrigger both in eoi and unmask callbacks
irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain
irqchip/xilinx: Do not call irq_set_default_host()
irqchip/xilinx: Enable generic irq multi handler
irqchip/xilinx: Fill error code when irq domain registration fails
irqchip/xilinx: Add support for multiple instances
...
On strict kernel memory permission, the ftrace have to change the
permission of text for dynamic patching the intructions. Use
riscv_patch_text_nosync() to patch code instead of probe_kernel_write.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
On strict kernel memory permission, we couldn't patch code without
writable permission. Preserve two holes in fixmap area, so we can map
the kernel code temporarily to fixmap area, then patch the instructions.
We need two pages here because we support the compressed instruction, so
the instruction might be align to 2 bytes. When patching the 32-bit
length instruction which is 2 bytes alignment, it will across two pages.
Introduce two interfaces to patch kernel code:
riscv_patch_text_nosync:
- patch code without synchronization, it's caller's responsibility to
synchronize all CPUs if needed.
riscv_patch_text:
- patch code and always synchronize with stop_machine()
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Extract the calculation of instruction length for common use.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The kernel mapping will tried to optimize its mapping by using bigger
size. In rv64, it tries to use PMD_SIZE, and tryies to use PGDIR_SIZE in
rv32. To ensure that the start address of these sections could fit the
mapping entry size, make them align to the biggest alignment.
Define a macro SECTION_ALIGN because the HPAGE_SIZE or PMD_SIZE, etc.,
are invisible in linker script.
This patch is prepared for STRICT_KERNEL_RWX support.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Move EXCEPTION_TABLE immediately after RO_DATA. Make it easy to set the
attribution of the sections which should be read-only at a time.
Add _data to specify the start of data section with write permission.
This patch is prepared for STRICT_KERNEL_RWX support.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch fixes the IPI(inner processor interrupt) missing issue. It
failed because it used hartid_mask to iterate for_each_cpu(), however the
cpu_mask and hartid_mask may not be always the same. It will never send the
IPI to hartid 4 because it will be skipped in for_each_cpu loop in my case.
We can reproduce this case in Qemu sifive_u machine by this command.
qemu-system-riscv64 -nographic -smp 5 -m 1G -M sifive_u -kernel \
arch/riscv/boot/loader
It will hang in csd_lock_wait(csd) because the csd_unlock(csd) is not
called. It is not called because hartid 4 doesn't receive the IPI to
release this lock. The caller hart doesn't send the IPI to hartid 4 is
because of hartid 4 is skipped in for_each_cpu(). It will be skipped is
because "(cpu) < nr_cpu_ids" is not true. The hartid is 4 and nr_cpu_ids
is 4. Therefore it should use cpumask in for_each_cpu() instead of
hartid_mask.
/* Send a message to all CPUs in the map */
arch_send_call_function_ipi_mask(cfd->cpumask_ipi);
if (wait) {
for_each_cpu(cpu, cfd->cpumask) {
call_single_data_t *csd;
csd = per_cpu_ptr(cfd->csd, cpu);
csd_lock_wait(csd);
}
}
for ((cpu) = -1; \
(cpu) = cpumask_next((cpu), (mask)), \
(cpu) < nr_cpu_ids;)
It could boot to login console after this patch applied.
Fixes: b2d36b5668f6 ("riscv: provide native clint access for M-mode")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, PLIC threshold is only initialized once in the beginning.
However, threshold can be set to disabled if a CPU is marked offline with
CPU hotplug feature. This will not allow to change the irq affinity to a
CPU that just came online.
Add PLIC specific CPU hotplug callbacks and enable the threshold when a CPU
comes online. Take this opportunity to move the external interrupt enable
code from trap init to PLIC driver as well. On cpu offline path, the driver
performs the exact opposite operations i.e. disable the interrupt and
the threshold.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20200302231146.15530-2-atish.patra@wdc.com
If secure_computing() rejected a system call, we were previously setting
the system call number to -1, to indicate to later code that the syscall
failed. However, if something (e.g. a user notification) was sleeping, and
received a signal, we may set a0 to -ERESTARTSYS and re-try the system call
again.
In this case, seccomp "denies" the syscall (because of the signal), and we
would set a7 to -1, thus losing the value of the system call we want to
restart.
Instead, let's return -1 from do_syscall_trace_enter() to indicate that the
syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS
or whatever.
This commit fixes the user_notification_signal seccomp selftest on riscv to
no longer hang. That test expects the system call to be re-issued after the
signal, and it wasn't due to the above bug. Now that it is, everything
works normally.
Note that in the ptrace (tracer) case, the tracer can set the register
values to whatever they want, so we still need to keep the code that
handles out-of-bounds syscalls. However, we can drop the comment.
We can also drop syscall_set_nr(), since it is no longer used anywhere, and
the code that re-loads the value in a7 because of it.
Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
These are only used once, and when reading the code I've always found them to
be more of a headache than a benefit. While they were never worth removing
before, LLVM's integrated assembler doesn't support LOCAL so rather that trying
to figure out how to refactor the macros it seems saner to just inline them.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
GCC allows users to hint to the register allocation that a variable should be
placed in a register by using a syntax along the lines of
function(...) {
register long in_REG __asm__("REG");
}
We've abused this a bit throughout the RISC-V port to access fixed registers
directly as C variables. In practice it's never going to blow up because GCC
isn't going to allocate these registers, but it's not a well defined syntax so
we really shouldn't be relying upon this. Luckily there is a very similar but
well defined syntax that allows us to still access these registers directly as
C variables, which is to simply declare the register variables globally. For
fixed variables this doesn't change the ABI.
LLVM disallows this ambiguous syntax, so this isn't just strictly a formatting
change.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
I don't know why we were doing this, as it's been there since the beginning.
After d841f729e655 ("riscv: force hart_lottery to put in .sdata section") my
guess would be that it made the kernel boot and we forgot to fix it more
cleanly.
The default .bss segment already contains the .sbss section, so we don't need
to do anything additional to ensure the symbols in .sbss continue to work.
Tested-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
In PIC code model, the zero initialized data always be put in .bss
section, so when building kernel as PIE, the hart_lottery won't present
in small data section, and it causes more than one harts to get the
lottery, because the main hart clears the content of .bss section
immediately after it getting the lottery.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: added a comment]
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The compiler uses the PIC-relative method to access static variables
instead of GOT when the code model is PIC. Therefore, the limitation of
the access range from the instruction to the symbol address is +-2GB.
Under this circumstance, the kernel cannot load a kernel module if this
module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason
is that kernel relocates the .data..percpu section of the kernel module to
the end of kernel's .data..percpu. Hence, the distance between the per-CPU
symbols and the instruction will exceed the 2GB limits. To solve this
problem, the kernel should place the loaded module in the memory area
[&_end-2G, VMALLOC_END].
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Suggested-by: Alexandre Ghiti <alex@ghiti.fr>
Suggested-by: Anup Patel <anup@brainfault.org>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Carlos de Paula <me@carlosedp.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Historically, we have been enabling all interrupts for each
HART in trap_init(). Ideally, we should only enable M-mode
interrupts for M-mode kernel and S-mode interrupts for S-mode
kernel in trap_init().
Currently, we get suprious S-mode interrupts on Kendryte K210
board running M-mode NO-MMU kernel because we are enabling all
interrupts in trap_init(). To fix this, we only enable software
and external interrupt in trap_init(). In future, trap_init()
will only enable software interrupt and PLIC driver will enable
external interrupt using CPU notifiers.
Fixes: a4c3733d32 ("riscv: abstract out CSR names for supervisor vs machine mode")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Palmer Dabbelt <palmerdabbelt@google.com> [QMEU virt machine with SMP]
[Palmer: Move the Fixes up to a newer commit]
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When the kernel is running in S-mode, the expectation is that the
bootloader or SBI layer will configure the PMP to allow the kernel to
access physical memory. But, when the kernel is running in M-mode and is
started with the ELF "loader", there's probably no bootloader or SBI layer
involved to configure the PMP. Thus, we need to configure the PMP
ourselves to enable the kernel to access all regions.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This tag contains a handful of patches that I'd like to target for this merge
window:
* Support for kasan.
* 32-bit physical addresses on rv32i-based systems.
* Support for CONFIG_DEBUG_VIRTUAL
* DT entry for the FU540 GPIO controller, which has recently had a device
driver merged.
These boot a buildroot-based system on QEMU's virt board for me.
-----BEGIN PGP SIGNATURE-----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=W7f7
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of patches for this merge window:
- Support for kasan
- 32-bit physical addresses on rv32i-based systems
- Support for CONFIG_DEBUG_VIRTUAL
- DT entry for the FU540 GPIO controller, which has recently had a
device driver merged
These boot a buildroot-based system on QEMU's virt board for me"
* tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT support for SiFive FU540 GPIO driver
riscv: mm: add support for CONFIG_DEBUG_VIRTUAL
riscv: keep 32-bit kernel to 32-bit phys_addr_t
kasan: Add riscv to KASAN documentation.
riscv: Add KASAN support
kasan: No KASAN's memmove check if archs don't have it.
Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFRBg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2VACgkge7vTeUNeZFc+6F4NWphAQ5tCQAoK/MMbU6
0O8ef7PjFwCU4s227UTv
=6m40
-----END PGP SIGNATURE-----
Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: n_hdlc: Use flexible-array member and struct_size() helper
tty: baudrate: SPARC supports few more baud rates
tty: baudrate: Synchronise baud_table[] and baud_bits[]
tty: serial: meson_uart: Add support for kernel debugger
serial: imx: fix a race condition in receive path
serial: 8250_bcm2835aux: Document struct bcm2835aux_data
serial: 8250_bcm2835aux: Use generic remapping code
serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
serial_core: Remove unused member in uart_port
vt: Correct comment documenting do_take_over_console()
vt: Delete comment referencing non-existent unbind_con_driver()
arch/xtensa/setup: Drop dummy_con initialization
arch/x86/setup: Drop dummy_con initialization
arch/unicore32/setup: Drop dummy_con initialization
arch/sparc/setup: Drop dummy_con initialization
arch/sh/setup: Drop dummy_con initialization
arch/s390/setup: Drop dummy_con initialization
...
Pull scheduler updates from Ingo Molnar:
"These were the main changes in this cycle:
- More -rt motivated separation of CONFIG_PREEMPT and
CONFIG_PREEMPTION.
- Add more low level scheduling topology sanity checks and warnings
to filter out nonsensical topologies that break scheduling.
- Extend uclamp constraints to influence wakeup CPU placement
- Make the RT scheduler more aware of asymmetric topologies and CPU
capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y
- Make idle CPU selection more consistent
- Various fixes, smaller cleanups, updates and enhancements - please
see the git log for details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
sched/fair: Define sched_idle_cpu() only for SMP configurations
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
idle: fix spelling mistake "iterrupts" -> "interrupts"
sched/fair: Remove redundant call to cpufreq_update_util()
sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
sched/fair: calculate delta runnable load only when it's needed
sched/cputime: move rq parameter in irqtime_account_process_tick
stop_machine: Make stop_cpus() static
sched/debug: Reset watchdog on all CPUs while processing sysrq-t
sched/core: Fix size of rq::uclamp initialization
sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
sched/fair: Load balance aggressively for SCHED_IDLE CPUs
sched/fair : Improve update_sd_pick_busiest for spare capacity case
watchdog: Remove soft_lockup_hrtimer_cnt and related code
sched/rt: Make RT capacity-aware
sched/fair: Make EAS wakeup placement consider uclamp restrictions
sched/fair: Make task_fits_capacity() consider uclamp restrictions
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
sched/uclamp: Make uclamp util helpers use and return UL values
...
This patch ports the feature Kernel Address SANitizer (KASAN).
Note: The start address of shadow memory is at the beginning of kernel
space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is
2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the
shadow memory would not overlap with the fixmap area.
There are currently two limitations in this port,
1. RV64 only: KASAN need large address space for extra shadow memory
region.
2. KASAN can't debug the modules since the modules are allocated in VMALLOC
area. We mapped the shadow memory, which corresponding to VMALLOC area, to
the kasan_early_shadow_page because we don't have enough physical space for
all the shadow memory corresponding to VMALLOC area.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Reported-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.
Delete them once they're no longer needed.
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The code in secondary_park is currently placed in the .init section. The
kernel reclaims and clears this code when it finishes booting. That
causes the cores parked in it to go to somewhere unpredictable, so we
move this function out of init to make sure the cores stay looping there.
The instruction bgeu a0, t0, .Lsecondary_park may have "a relocation
truncated to fit" issue during linking time. It is because that sections
are too far to jump. Let's use tail to jump to the .Lsecondary_park.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup.patel@sifive.com>
Cc: Andreas Schwab <schwab@suse.de>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20191218214506.49252-19-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather than
when they aren't present
- Move the header files associated with the SiFive L2 cache controller
to drivers/soc (where the code was recently moved)
-----BEGIN PGP SIGNATURE-----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=qvPe
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather
than when they aren't present
- Move the header files associated with the SiFive L2 cache
controller to drivers/soc (where the code was recently moved)"
* tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup obvious bug for fp-regs reset
riscv: move sifive_l2_cache.h to include/soc
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine
ISA Register misa. Every bit:1 indicate a feature, so we should beqz
reset_done when there is no F/D bit in csr_misa register.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[paul.walmsley@sifive.com: fix typo in commit message]
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently
generic macro name that it's used by several source files across the
Linux code base. Some of these other files ultimately include the
arch/riscv CSR include file, causing collisions. Fix by prefixing the
RISC-V csr.h IRQ_ macro names with an RV_ prefix.
Fixes: a4c3733d32 ("riscv: abstract out CSR names for supervisor vs machine mode")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The condition should be logical NOT to assign the hook address to parent
address. Because the return value 0 of function_graph_enter upon
success.
Fixes: e949b6db51 (riscv/function_graph: Simplify with function_graph_enter())
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops
with "Unable to handle kernel paging request at virtual address" message. This
happens when enosys stressor starts testing random non-valid syscalls.
I forgot to redirect any syscall below -1 to sys_ni_syscall.
With the patch kernel oops messages are gone while running stress-ng enosys
stressor.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 5340627e3f ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When support for !MMU was added, the declaration of
__asm_copy_to_user() & __asm_copy_from_user() were #ifdefed
out hence their EXPORT_SYMBOL() give an error message like:
.../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here
.../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here
Since these symbols are not defined with !MMU it's wrong to export them.
Same for __clear_user() (even though this one is also declared in
include/asm-generic/uaccess.h and thus doesn't give an error message).
Fix this by doing the EXPORT_SYMBOL() directly where these symbols
are defined: inside lib/uaccess.S itself.
Fixes: 6bd33e1ece ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch fixes that the sscratch register clearing in M-mode. It cleared
sscratch register in M-mode, but it should clear mscratch register. That will
cause kernel trap if the CPU core doesn't support S-mode when trying to access
sscratch.
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the entry code over to use CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20191015191821.11479-17-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
New features:
- SECCOMP support
- nommu support
- SBI-less system support
- M-Mode support
- TLB flush optimizations
Other improvements:
- Pass the complete RISC-V ISA string supported by the CPU cores to
userspace, rather than redacting parts of it in the kernel
- Add platform DMA IP block data to the HiFive Unleashed board DT file
- Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image
compression formats, in line with other architectures
Cleanups:
- Remove unnecessary PTE_PARENT_SIZE macro
- Standardize include guard naming across arch/riscv
-----BEGIN PGP SIGNATURE-----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=nbwY
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"New features:
- SECCOMP support
- nommu support
- SBI-less system support
- M-Mode support
- TLB flush optimizations
Other improvements:
- Pass the complete RISC-V ISA string supported by the CPU cores to
userspace, rather than redacting parts of it in the kernel
- Add platform DMA IP block data to the HiFive Unleashed board DT
file
- Add Makefile support for BZ2, LZ4, LZMA, LZO kernel image
compression formats, in line with other architectures
Cleanups:
- Remove unnecessary PTE_PARENT_SIZE macro
- Standardize include guard naming across arch/riscv"
* tag 'riscv/for-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits)
riscv: provide a flat image loader
riscv: add nommu support
riscv: clear the instruction cache and all registers when booting
riscv: read the hart ID from mhartid on boot
riscv: provide native clint access for M-mode
riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00
riscv: add support for MMIO access to the timer registers
riscv: implement remote sfence.i using IPIs
riscv: cleanup the default power off implementation
riscv: poison SBI calls for M-mode
riscv: don't allow selecting SBI based drivers for M-mode
RISC-V: Add multiple compression image format.
riscv: clean up the macro format in each header file
riscv: Use PMD_SIZE to replace PTE_PARENT_SIZE
riscv: abstract out CSR names for supervisor vs machine mode
riscv: separate MMIO functions into their own header file
riscv: enter WFI in default_power_off() if SBI does not shutdown
RISC-V: Issue a tlb page flush if possible
RISC-V: Issue a local tlbflush if possible.
RISC-V: Do not invoke SBI call if cpumask is empty
...
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- Cross-arch changes to move the linker sections for NOTES and
EXCEPTION_TABLE into the RO_DATA area, where they belong on most
architectures. (Kees Cook)
- Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
trap jumps into the middle of those padding areas instead of
sliding execution. (Kees Cook)
- A thorough cleanup of symbol definitions within x86 assembler code.
The rather randomly named macros got streamlined around a
(hopefully) straightforward naming scheme:
SYM_START(name, linkage, align...)
SYM_END(name, sym_type)
SYM_FUNC_START(name)
SYM_FUNC_END(name)
SYM_CODE_START(name)
SYM_CODE_END(name)
SYM_DATA_START(name)
SYM_DATA_END(name)
etc - with about three times of these basic primitives with some
label, local symbol or attribute variant, expressed via postfixes.
No change in functionality intended. (Jiri Slaby)
- Misc other changes, cleanups and smaller fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
x86/entry/64: Remove pointless jump in paranoid_exit
x86/entry/32: Remove unused resume_userspace label
x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
m68k: Convert missed RODATA to RO_DATA
x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
x86/mm: Report actual image regions in /proc/iomem
x86/mm: Report which part of kernel image is freed
x86/mm: Remove redundant address-of operators on addresses
xtensa: Move EXCEPTION_TABLE to RO_DATA segment
powerpc: Move EXCEPTION_TABLE to RO_DATA segment
parisc: Move EXCEPTION_TABLE to RO_DATA segment
microblaze: Move EXCEPTION_TABLE to RO_DATA segment
ia64: Move EXCEPTION_TABLE to RO_DATA segment
h8300: Move EXCEPTION_TABLE to RO_DATA segment
c6x: Move EXCEPTION_TABLE to RO_DATA segment
arm64: Move EXCEPTION_TABLE to RO_DATA segment
alpha: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Actually use _etext for the end of the text segment
vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
...
-----BEGIN PGP SIGNATURE-----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=QCEy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
Linus Torvalds