When switchdev drivers process FDB notifications from the underlying
device they resolve the netdev to which the entry points to and notify
the bridge using the switchdev notifier.
However, since the RTNL mutex is not held there is nothing preventing
the netdev from disappearing in the middle, which will cause
br_switchdev_event() to dereference a non-existing netdev.
Make switchdev drivers hold the lock at the beginning of the
notification processing session and release it once it ends, after
notifying the bridge.
Also, remove switchdev_mutex and fdb_lock, as they are no longer needed
when RTNL mutex is held.
Fixes: 03bf0c2812 ("switchdev: introduce switchdev notifier")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trying to batch Tx response events results in poor performance because
this delays freeing the transmitted skbs.
Instead use the standard RING_FINAL_CHECK_FOR_RESPONSES() macro to be
notified once the next Tx response is placed on the ring.
Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code in txq_put_data() would use txq->tx_curr_desc to index the
tso_hdrs/tso_hdrs_dma buffers, for less than 8 bytes unaligned
fragments, which is already moved to the next descriptor at the
beginning of the function.
If that fragment was the last of the the skb, the next skb would use
that same space to place the ip headers, overwritting that small
fragment data.
Fixes: 91986fd3d3 (net: mv643xx_eth: Ensure proper data alignment in TSO TX path)
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Reviewed-by: Philipp Kirchhofer <philipp@familie-kirchhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_phy_find_device() is used to find the phy device associated with a
device node. It is expected the node is for a PHY device, but in fact
it could of been probed as a generic MDIO device. Ensure the device is
a PHY before returning it.
Fixes: a9049e0c51 ("mdio: Add support for mdio drivers.")
Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* make regulatory messages much less verbose by default
* various remain-on-channel fixes
* scheduled scanning fixes with hardware restart
* a PS-Poll handling fix; was broken just recently
* bugfix to avoid buffering non-bufferable MMPDUs
* world regulatory domain data fix
* a fix for scanning causing other work to get stuck
* hwsim: revert an older problematic patch that caused some
userspace tools to have issues - not that big a deal as
it's a debug only driver though
-----BEGIN PGP SIGNATURE-----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=6M7a
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2016-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Here's a first set of fixes for the 4.5-rc cycle:
* make regulatory messages much less verbose by default
* various remain-on-channel fixes
* scheduled scanning fixes with hardware restart
* a PS-Poll handling fix; was broken just recently
* bugfix to avoid buffering non-bufferable MMPDUs
* world regulatory domain data fix
* a fix for scanning causing other work to get stuck
* hwsim: revert an older problematic patch that caused some
userspace tools to have issues - not that big a deal as
it's a debug only driver though
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are some fixes for drm/rockchip, these fixes base on drm-next.
These fixes works on my popmetal(rk3288) board.
About patch: drm/atomic-helper: Export framebuffer_changed()
Daniel Vetter ack for merging it through rockchip git trees, so framebuffer_changed() can be reused by drm/rockchip.
All others looks good, so I'd like you can land them.
* 'drm-rockchip-next-fixes-2016-01-22' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: respect CONFIG_DRM_FBDEV_EMULATION
drm/rockchip: fix wrong pitch/size using on gem
drm/rockchip: explain why we can't wait_for_vblanks
drm/rockchip: don't wait for vblank if fb hasn't changed
drm/atomic-helper: Export framebuffer_changed()
drm/rockchip/dsi: fix handling mipi_dsi_pixel_format_to_bpp result
drm/rockchip: vop: fix mask when updating interrupts
drm/rockchip: cleanup unnecessary export symbol
drm/rockchip: Don't build rockchip_drm_vop as modules
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit fixes a corner case in tcp_mark_head_lost() which was
causing the WARN_ON(len > skb->len) in tcp_fragment() to fire.
tcp_mark_head_lost() was assuming that if a packet has
tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of
M*mss bytes, for any M < N. But with the tricky way TCP pcounts are
maintained, this is not always true.
For example, suppose the sender sends 4 1-byte packets and have the
last 3 packet sacked. It will merge the last 3 packets in the write
queue into an skb with pcount = 3 and len = 3 bytes. If another
recovery happens after a sack reneging event, tcp_mark_head_lost()
may attempt to split the skb assuming it has more than 2*MSS bytes.
This sounds very counterintuitive, but as the commit description for
the related commit c0638c247f ("tcp: don't fragment SACKed skbs in
tcp_mark_head_lost()") notes, this is because tcp_shifted_skb()
coalesces adjacent regions of SACKed skbs, and when doing this it
preserves the sum of their packet counts in order to reflect the
real-world dynamics on the wire. The c0638c247f commit tried to
avoid problems by not fragmenting SACKed skbs, since SACKed skbs are
where the non-proportionality between pcount and skb->len/mss is known
to be possible. However, that commit did not handle the case where
during a reneging event one of these weird SACKed skbs becomes an
un-SACKed skb, which tcp_mark_head_lost() can then try to fragment.
The fix is to simply mark the entire skb lost when this happens.
This makes the recovery slightly more aggressive in such corner
cases before we detect reordering. But once we detect reordering
this code path is by-passed because FACK is disabled.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vc4.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCgAGBQJWnqxfAAoJELXWKTbR/J7oIUQQAIswWnwRLqsNU+2gX6+rG20i
SA5KsUidfi644MPMzR5t5js57EkV8r70mtMhoZ3cU5VYXOdk6WdnN0OQVIrd5inb
wQILCb2e0kWUZ39+TLeIGEmQ482+bp6yM1jVijxTrvvv/tpyI5cDIezVVzdDjWW4
Ah1vXpfppTFlTWwe9ZNrNjcmqIw4oQ2mQMnEFhTUbZnUPOqPnSC6/ZCOvybgV1E9
xsn6Gk+eLPxjKmNucFMtnjdlE6hGNlL+N0IZmPRzc0imoGgzUFQoQiSKROkMbJE0
NGNvPzTux82B4PR0q9yQHu4PrhNiBG2GT2HibrT5QrliwK489bKXcGG0Kh6hHGCl
RUUkB1fk1daxf8XTE9aBv4s+XnWzeeGOiqsVPG+BNCfc6IoYKPTN0a0jzfy0tk+g
sZMjB3r1xY1lS2IHyJ9fAGH86SmSpQPqjap8t0KRnFqORj03ch67GJLOYlVHVqu2
avngB/ByGVcFMElC8ccp2d3rbxKjDwDdBsFFn685hOSYE+ZkGQRpF2FRA6JplcHf
xKzfbyhjzwURhJMVjz2F5ZNl+qGC1SAaI9BMFaw+PmW2PPtffHHITO1PwRpbQA7K
UM5Z3GTB6JFOqTbMutltjUVKUsH48HLQMoQMBvAE8xg5o/GPaUXRn1FKQH1lBeuT
zucC/MZBqHffFSlbqpuj
=Qvir
-----END PGP SIGNATURE-----
Merge tag 'drm-vc4-fixes-2015-01-19' of http://github.com/anholt/linux into drm-fixes
This pull request just includes the !CONFIG_PM_SLEEP build fix for
vc4.
* tag 'drm-vc4-fixes-2015-01-19' of http://github.com/anholt/linux:
drm/vc4: Remove broken attempt at GPU reset using genpd.
A bunch of etnaviv fixes for 4.5-rc. Most of them are fixing
things in code paths that will only be hit if something goes
wrong, which have been unearthed by more extensive testing.
The only thing that doesn't really qualify as fixes is an UAPI
extension that userspace wants to rely on being present, so
I want to fast-track this into 4.5 before etnaviv ends up in a
released kernel.
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
drm/etnaviv: call correct function when trying to vmap a DMABUF
drm/etnaviv: rename etnaviv_gem_vaddr to etnaviv_gem_vmap
drm/etnaviv: fix get pages error path in etnaviv_gem_vaddr
drm/etnaviv: fix memory leak in IOMMU init path
drm/etnaviv: add further minor features and varyings count
drm/etnaviv: add helper for comparing model/revision IDs
drm/etnaviv: add helper to extract bitfields
drm/etnaviv: use defined constants for the chip model
drm/etnaviv: update common and state_hi xml.h files
drm/etnaviv: ignore VG GPUs with FE2.0
drm/etnaviv: fix failure path if model is zero
drm/etnaviv: hold object lock while getting pages for coredump
drm/etnaviv: remove owner assignment from platform_driver
Misc radeon and amdgpu fixes:
- SMU firmware loading fix for Stoney
- DP audio fixes for DCE4.1
- Don't expose fbdev device if no connectors
- fix page table LRU list update handling
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: only move pt bos in LRU list on success
drm/radeon: fix DP audio support for APU with DCE4.1 display engine
drm/radeon: Add a common function for DFS handling
drm/radeon: cleaned up VCO output settings for DP audio
drm/amd/powerplay: Update SMU firmware loading for Stoney
drm/amdgpu: don't init fbdev if we don't have any connectors
drm/radeon: only init fbdev if we have connectors
drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl
drm/amdgpu: fix next_rptr handling for debugfs
drm/radeon: properly byte swap vce firmware setup
drm/amdgpu: add a message to indicate when powerplay is enabled (v2)
drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2
drm/amd/amdgpu: Improve amdgpu_dpm* macros to avoid unexpected result (v2)
drm/amdgpu: Allow the driver to load if amdgpu.powerplay=1 on asics without powerplay support
drm/amdgpu: Use drm_calloc_large for VM page_tables array
drm/amdgpu: Add some tweaks to gfx 8 soft reset
drm/amdgpu: fix tonga smu resume
Xin Long says:
====================
fix the transport dead race check by using atomic_add_unless on refcnt
sctp: fix the transport dead race check by using atomic_add_unless on
refcnt
sctp: hold transport before we access t->asoc in sctp proc
sctp: remove the dead field of sctp_transport
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After we use refcnt to check if transport is alive, the dead can be
removed from sctp_transport.
The traversal of transport_addr_list in procfs dump is using
list_for_each_entry_rcu, no need to check if it has been freed.
sctp_generate_t3_rtx_event and sctp_generate_heartbeat_event is
protected by sock lock, it's not necessary to check dead, either.
also, the timers are cancelled when sctp_transport_free() is
called, that it doesn't wait for refcnt to reach 0 to cancel them.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, before rhashtable, /proc assoc listing was done by
read-locking the entire hash entry and dumping all assocs at once, so we
were sure that the assoc wasn't freed because it wouldn't be possible to
remove it from the hash meanwhile.
Now we use rhashtable to list transports, and dump entries one by one.
That is, now we have to check if the assoc is still a good one, as the
transport we got may be being freed.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when __sctp_lookup_association is running in BH, it will try to
check if t->dead is set, but meanwhile other CPUs may be freeing this
transport and this assoc and if it happens that
__sctp_lookup_association checked t->dead a bit too early, it may think
that the association is still good while it was already freed.
So we fix this race by using atomic_add_unless in sctp_transport_hold.
After we get one transport from hashtable, we will hold it only when
this transport's refcnt is not 0, so that we can make sure t->asoc
cannot be freed before we hold the asoc again.
Note that sctp association is not freed using RCU so we can't use
atomic_add_unless() with it as it may just be too late for that either.
Fixes: 4f00878126 ("sctp: apply rhashtable api to send/recv path")
Reported-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
mlxsw: driver fixes
Couple of various mlxsw driver fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The rx_lane, tx_lane and module fields in the PMLP register don't have
an additional offset besides the base one (0x04), so set it to 0x00.
Fixes: 4ec14b7634 ("mlxsw: Add interface to access registers and process events")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When dumping the FDB we can't compare the actual pointers of the ports
structs, as it's possible the struct represents a vPort instead of the
underlying physical port.
Solve this by comparing the local port number instead, as it's shared
between the physical ports and all the vPorts on top of him.
Fixes: 54a732018d ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LAG FDB records can only point to LAG devices or VLAN devices configured
on top of them. Therefore, when dumping the FDB we shouldn't associate
these records with the underlying physical ports.
Fixes: 8a1ab5d766 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LAG FDB entries pointing to VLAN devices should be reported to the
bridge with the matching VLAN device and not the underlying LAG device.
Fixes: aac78a4408 ("mlxsw: spectrum: Adjust FDB notifications for VLAN devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When dumping the hardware FDB we should report entries pointing to VLAN
devices with VLAN 0, as packets coming into the bridge are untagged.
Likewise, pass FDB_{ADD,DEL} notifications with VLAN 0 for these
devices.
Fixes: 54a732018d ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we disable learning on bridge port we should still update the
software bridge's FDB when entry pointing to this bridge port is
aged-out. We can otherwise have an inconsistency between software and
hardware tables.
Fixes: 8a1ab5d766 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When port is put into LISTENING state it shouldn't populate the FDB, so
set the port's STP state in hardware to DISCARDING instead of LEARNING.
It will therefore keep listening to BPDU packets, but discard other
non-control packets and won't perform any learning.
Fixes: 56ade8fe3f ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When STP state is set to DISABLED the port is assumed to be inactive, but
currently we forward packets ingressing through it.
Instead, set the port's STP state in hardware to DISCARDING, which means
it doesn't forward packets or perform any learning, but it does trap
control packets. However, these packets will be dropped by bridge code,
which results in the expected behavior.
Fixes: 56ade8fe3f ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in previous commit, we should always take care of flushing
the FDB in the driver and not rely on bridge code.
We need to distinguish between two cases with regards to LAG:
1) Port is leaving LAG while LAG is bridged (or VLAN devices on top of
it). In this case don't flush the FDB entries pointing to the LAG ID, as
this will affect other ports still member in the LAG. Only flush the FDB
when the last port in the LAG is leaving the bridge.
2) LAG device is leaving the bridge. In this case the CHANGEUPPER event
is simply propagated to each member port, so make each port flush the
FDB in its turn.
Note that emptying a bridged LAG from ports creates an inconsistency
between hardware and software. A user who later (< ageing_time)
re-populates the LAG won't have any FDB entries pointing to the LAG ID
in hardware, but they will be present in the software bridge's FDB.
Currently there is no good solution to this problem, but this will be
addressed by us in the future.
In order to optimize the flushing process, flush by port or LAG ID if
there are no VLAN interfaces on top of the port. Otherwise, flush using
(Port / LAG ID, FID=VID} for each of the lower 4K FIDs. In the case of
VLAN device simply flush using {Port / LAG ID, vFID} with the vFID to
which the VLAN device is mapped to.
Fixes: 56ade8fe3f ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When removing a net device from a bridge we should flush the FDB entries
associated with this net device. Up until now, we relied upon bridge
code to do that for us, but it is possible for user to prevent hardware
from syncing with the software bridge (learning_sync=0), so we need to
flush overselves.
Add the Switch Filtering DB Flush (SFDF) register that is used to flush
FDB entries according to different parameters (per-port, per-FID etc).
Fixes: 56ade8fe3f ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible for a user to remove a port from a LAG device, while the
LAG device or VLAN devices on top of it are bridged. In these cases,
bridge's teardown sequence is never issued, so we need to take care of
it ourselves.
When LAG's unlinking event is received by port netdev:
1) Traverse its vPorts list and make those member in a bridge leave it.
They will be deleted later by LAG code.
2) Make the port netdev itself leave its bridge if member in one.
Fixes: 0d65fc1304 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a race between perf_event_exit_task_context() and
orphans_remove_work() which results in a use-after-free.
We mark ctx->task with TASK_TOMBSTONE to indicate a context is
'dead', under ctx->lock. After which point event_function_call()
on any event of that context will NOP
A concurrent orphans_remove_work() will only hold ctx->mutex for
the list iteration and not serialize against this. Therefore its
possible that orphans_remove_work()'s perf_remove_from_context()
call will fail, but we'll continue to free the event, with the
result of free'd memory still being on lists and everything.
Once perf_event_exit_task_context() gets around to acquiring
ctx->mutex it too will iterate the event list, encounter the
already free'd event and proceed to free it _again_. This fails
with the WARN in free_event().
Plug the race by having perf_event_exit_task_context() hold
ctx::mutex over the whole tear-down, thereby 'naturally'
serializing against all other sites, including the orphan work.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: alexander.shishkin@linux.intel.com
Cc: dsahern@gmail.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/20160125130954.GY6357@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should set event->owner before we install the event,
otherwise there is a hole where the target task can fork() and
we'll not inherit the event because it thinks the event is
orphaned.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes a race condition in the error case: since the pt bos have not
necessarily been reserved in case of an error, we could move a pt bo that
is currently in the middle of being evicted/moved by another process,
which then resulted in a BUG_ON in ttm_bo_add_to_lru.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here are two fixes of crashes in the visor driver that could be
triggered using bad (malicious) descriptors, a fix for two memory leaks
in the new mxu11x0 driver, and an interface-blacklist fix for the option
driver.
Included are also some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=SxKT
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.5-rc2
Here are two fixes of crashes in the visor driver that could be
triggered using bad (malicious) descriptors, a fix for two memory leaks
in the new mxu11x0 driver, and an interface-blacklist fix for the option
driver.
Included are also some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
This was wrongly updated by commit 7aa9a23c69 ("powerpc, thp: remove
infrastructure for handling splitting PMDs") during the last merge
window. Fix it up.
This could lead to incorrect behaviour in THP and/or mprotect(), at a
minimum.
Fixes: 7aa9a23c69 ("powerpc, thp: remove infrastructure for handling splitting PMDs")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 7a7868326d ("powerpc/perf: Add an explict flag indicating
presence of SLOT field") introduced the PPMU_HAS_SSLOT flag to remove
the assumption that MMCRA[SLOT] was present when PPMU_ALT_SIPR was not
set.
That commit's changelog also mentions that Power8 does not support
MMCRA[SLOT]. However when the Power8 PMU support was merged, it
errnoeously included the PPMU_HAS_SSLOT flag.
So remove PPMU_HAS_SSLOT from the Power8 flags.
mpe: On systems where MMCRA[SLOT] exists, the field occupies bits 37:39
(IBM numbering). On Power8 bit 37 is reserved, and 38:39 overlap with
the high bits of the Threshold Event Counter Mantissa. I am not aware of
any published events which use the threshold counting mechanism, which
would cause the mantissa bits to be set. So in practice this bug is
unlikely to trigger.
Fixes: e05b9b9e5c ("powerpc/perf: Power8 PMU support")
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove an unnecassary cast in the argument to kfree.
Found using Coccinelle. The semantic patch used to find this is as follows:
//<smpl>
@@
type T;
expression *f;
@@
- kfree((T *)(f));
+ kfree(f);
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
amdgpu_amdkfd_gfx_7_get_functions and amdgpu_amdkfd_gfx_8_0_get_functions
have no parameters, so use the normal void parameter convention to make
them match their prototypes in the header file
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We dereference "eaction->event" inside the call to drm_send_event_locked()
so should hold off on setting it to NULL until afterward.
Fixes: fb740cf249 ("drm: Create drm_send_event helpers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160128090646.GA5824@mwanda
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ALSA dummy driver can switch the timer backend between system timer
and hrtimer via its hrtimer module option. This can be also switched
dynamically via sysfs, but it may lead to a memory corruption when
switching is done while a PCM stream is running; the stream instance
for the newly switched timer method tries to access the memory that
was allocated by another timer method although the sizes differ.
As the simplest fix, this patch just disables the switch via sysfs by
dropping the writable bit.
BugLink: http://lkml.kernel.org/r/CACT4Y+ZGEeEBntHW5WHn2GoeE0G_kRrCmUh6=dWyy-wfzvuJLg@mail.gmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
NFS_LAYOUT_RETURN_BEFORE_CLOSE is being used to signal that a
layoutreturn is needed, either due to a layout recall or to a
layout error. Rename it to NFS_LAYOUT_RETURN_REQUESTED in order
to clarify its purpose.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
KEY_FLAG_KEEP should only be applied to a key if the keyring it is being
linked into has KEY_FLAG_KEEP set.
To this end, partially revert the following patch:
commit 1d6d167c2e
Author: Mimi Zohar <zohar@linux.vnet.ibm.com>
Date: Thu Jan 7 07:46:36 2016 -0500
KEYS: refcount bug fix
to undo the change that made it unconditional (Mimi got it right the first
time).
Without undoing this change, it becomes impossible to delete, revoke or
invalidate keys added to keyrings through __key_instantiate_and_link()
where the keyring has itself been linked to. To test this, run the
following command sequence:
keyctl newring foo @s
keyctl add user a a %:foo
keyctl unlink %user:a %:foo
keyctl clear %:foo
With the commit mentioned above the third and fourth commands fail with
EPERM when they should succeed.
Reported-by: Stephen Gallager <sgallagh@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
cc: keyrings@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
gcc warns quite a bit about values returned from allocate_resources()
in cpufreq-dt.c:
cpufreq-dt.c: In function 'cpufreq_init':
cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here
cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here
cpufreq-dt.c: In function 'dt_cpufreq_probe':
cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here
The problem is that it's slightly hard for gcc to follow return
codes across PTR_ERR() calls.
This patch uses explicit assignments to the "ret" variable to make
it easier for gcc to verify that the code is actually correct,
without the need to add a bogus initialization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two definitions of pxa_cpufreq_change_voltage, with slightly
different prototypes after one of them had its argument marked 'const'.
Now the other one (for !CONFIG_REGULATOR) produces a harmless warning:
drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target':
drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argument 1 of 'pxa_cpufreq_change_voltage' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
^
drivers/cpufreq/pxa2xx-cpufreq.c:205:12: note: expected 'struct pxa_freqs *' but argument is of type 'const struct pxa_freqs *'
static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq)
^
This changes the prototype in the same way as the other, which
avoids the warning.
Fixes: 03c2299063 (cpufreq: pxa: make pxa_freqs arrays const)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.2+ <stable@vger.kernel.org> # 4.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The APM emulation code does multiple things, and some of them depend on
PM_SLEEP, while the battery management does not. However, selecting
the symbol like SHARPSL_PM does causes a Kconfig warning:
warning: (SHARPSL_PM && PMAC_APM_EMU) selects APM_EMULATION which has unmet direct dependencies (PM && SYS_SUPPORTS_APM_EMULATION)
From all I can tell, this is completely harmless, and we can simply allow
APM_EMULATION to be enabled here, even if PM is not.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently next_policy() explicitly checks if a policy is the last
policy in the cpufreq_policy_list. Use the standard list_is_last
primitive instead.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This was found with the -RT patch enabled, but the fix should apply to
non-RT also.
Used multi_v7_defconfig+PREEMPT_RT_FULL=y and this caused a compilation
warning without this fix:
../drivers/cpuidle/coupled.c:122:21: warning: 'cpuidle_coupled_lock'
defined but not used [-Wunused-variable]
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ido Schimmel