The ENABLE_DEV_COREDUMP option is misleading as it implies that
it gets the framework enabled, this isn't true it just allows it
to get enabled if a driver needs it.
Rename it to ALLOW_DEV_COREDUMP to better capture its semantics.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's desirable for allnconfig and tinyconfig targets to result in the
least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to
switch off DEV_COREDUMP regardless if any drivers select
WANT_DEV_COREDUMP.
This patch renames the option to ENABLE_DEV_COREDUMP and setting it to
'n' (as in allnconfig or tinyconfig) will effectively disable device
coredump.
Cc: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It isn't obvious that CMA can be disabled on the kernel's command line, so
document it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many devices run firmware and/or complex hardware, and most of that
can have bugs. When it misbehaves, however, it is often much harder
to debug than software running on the host.
Introduce a "device coredump" mechanism to allow dumping internal
device/firmware state through a generalized mechanism. As devices
are different and information needed can vary accordingly, this
doesn't prescribe a file format - it just provides mechanism to
get data to be able to capture it in a generalized way (e.g. in
distributions.)
The dumped data will be readable in sysfs in the virtual device's
data file under /sys/class/devcoredump/devcd*/. Writing to it will
free the data and remove the device, as does a 5-minute timeout.
Note that generalized capturing of such data may result in privacy
issues, so users generally need to be involved. In order to allow
certain users/system integrators/... to disable the feature at all,
introduce a Kconfig option to override the drivers that would like
to have the feature.
For now, this provides two ways of dumping data:
1) with a vmalloc'ed area, that is then given to the subsystem
and freed after retrieval or timeout
2) with a generalized reader/free function method
We could/should add more options, e.g. a list of pages, since the
vmalloc area is very limited on some architectures.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, there are two users on CMA functionality, one is the DMA
subsystem and the other is the KVM on powerpc. They have their own code
to manage CMA reserved area even if they looks really similar. From my
guess, it is caused by some needs on bitmap management. KVM side wants
to maintain bitmap not for 1 page, but for more size. Eventually it use
bitmap where one bit represents 64 pages.
When I implement CMA related patches, I should change those two places
to apply my change and it seem to be painful to me. I want to change
this situation and reduce future code management overhead through this
patch.
This change could also help developer who want to use CMA in their new
feature development, since they can use CMA easily without copying &
pasting this reserved area management code.
In previous patches, we have prepared some features to generalize CMA
reserved area management and now it's time to do it. This patch moves
core functions to mm/cma.c and change DMA APIs to use these functions.
There is no functional change in DMA APIs.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[The patch was originally proposed by Tom Gundersen, and rewritten
afterwards by me; most of changelogs below borrowed from Tom's
original patch -- tiwai]
Currently (at least) the dell-rbu driver selects FW_LOADER_USER_HELPER,
which means that distros can't really stop loading firmware through
udev without breaking other users (though some have).
Ideally we would remove/disable the udev firmware helper in both the
kernel and in udev, but if we were to disable it in udev and not the
kernel, the result would be (seemingly) hung kernels as no one would
be around to cancel firmware requests.
This patch allows udev firmware loading to be disabled while still
allowing non-udev firmware loading, as done by the dell-rbu driver, to
continue working. This is achieved by only using the fallback
mechanism when the uevent is suppressed.
The patch renames the user-selectable Kconfig from FW_LOADER_USER_HELPER
to FW_LOADER_USER_HELPER_FALLBACK, and the former is reverse-selected
by the latter or the drivers that need userhelper like dell-rbu.
Also, the "default y" is removed together with this change, since it's
been deprecated in udev upstream, thus rather better to disable it
nowadays.
Tested with
FW_LOADER_USER_HELPER=n
LATTICE_ECP3_CONFIG=y
DELL_RBU=y
and udev without the firmware loading support, but I don't have the
hardware to test the lattice/dell drivers, so additional testing would
be appreciated.
Reviewed-by: Tom Gundersen <teg@jklm.no>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Abhay Salunke <Abhay_Salunke@dell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kay Sievers <kay@vrfy.org>
Tested-by: Balaji Singh <B_B_Singh@DELL.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A fence can be attached to a buffer which is being filled or consumed
by hw, to allow userspace to pass the buffer without waiting to another
device. For example, userspace can call page_flip ioctl to display the
next frame of graphics after kicking the GPU but while the GPU is still
rendering. The display device sharing the buffer with the GPU would
attach a callback to get notified when the GPU's rendering-complete IRQ
fires, to update the scan-out address of the display, without having to
wake up userspace.
A driver must allocate a fence context for each execution ring that can
run in parallel. The function for this takes an argument with how many
contexts to allocate:
+ fence_context_alloc()
A fence is transient, one-shot deal. It is allocated and attached
to one or more dma-buf's. When the one that attached it is done, with
the pending operation, it can signal the fence:
+ fence_signal()
To have a rough approximation whether a fence is fired, call:
+ fence_is_signaled()
The dma-buf-mgr handles tracking, and waiting on, the fences associated
with a dma-buf.
The one pending on the fence can add an async callback:
+ fence_add_callback()
The callback can optionally be cancelled with:
+ fence_remove_callback()
To wait synchronously, optionally with a timeout:
+ fence_wait()
+ fence_wait_timeout()
When emitting a fence, call:
+ trace_fence_emit()
To annotate that a fence is blocking on another fence, call:
+ trace_fence_annotate_wait_on(fence, on_fence)
A default software-only implementation is provided, which can be used
by drivers attaching a fence to a buffer when they have no other means
for hw sync. But a memory backed fence is also envisioned, because it
is common that GPU's can write to, or poll on some memory location for
synchronization. For example:
fence = custom_get_fence(...);
if ((seqno_fence = to_seqno_fence(fence)) != NULL) {
dma_buf *fence_buf = seqno_fence->sync_buf;
get_dma_buf(fence_buf);
... tell the hw the memory location to wait ...
custom_wait_on(fence_buf, seqno_fence->seqno_ofs, fence->seqno);
} else {
/* fall-back to sw sync * /
fence_add_callback(fence, my_cb);
}
On SoC platforms, if some other hw mechanism is provided for synchronizing
between IP blocks, it could be supported as an alternate implementation
with it's own fence ops in a similar way.
enable_signaling callback is used to provide sw signaling in case a cpu
waiter is requested or no compatible hardware signaling could be used.
The intention is to provide a userspace interface (presumably via eventfd)
later, to be used in conjunction with dma-buf's mmap support for sw access
to buffers (or for userspace apps that would prefer to do their own
synchronization).
v1: Original
v2: After discussion w/ danvet and mlankhorst on #dri-devel, we decided
that dma-fence didn't need to care about the sw->hw signaling path
(it can be handled same as sw->sw case), and therefore the fence->ops
can be simplified and more handled in the core. So remove the signal,
add_callback, cancel_callback, and wait ops, and replace with a simple
enable_signaling() op which can be used to inform a fence supporting
hw->hw signaling that one or more devices which do not support hw
signaling are waiting (and therefore it should enable an irq or do
whatever is necessary in order that the CPU is notified when the
fence is passed).
v3: Fix locking fail in attach_fence() and get_fence()
v4: Remove tie-in w/ dma-buf.. after discussion w/ danvet and mlankorst
we decided that we need to be able to attach one fence to N dma-buf's,
so using the list_head in dma-fence struct would be problematic.
v5: [ Maarten Lankhorst ] Updated for dma-bikeshed-fence and dma-buf-manager.
v6: [ Maarten Lankhorst ] I removed dma_fence_cancel_callback and some comments
about checking if fence fired or not. This is broken by design.
waitqueue_active during destruction is now fatal, since the signaller
should be holding a reference in enable_signalling until it signalled
the fence. Pass the original dma_fence_cb along, and call __remove_wait
in the dma_fence_callback handler, so that no cleanup needs to be
performed.
v7: [ Maarten Lankhorst ] Set cb->func and only enable sw signaling if
fence wasn't signaled yet, for example for hardware fences that may
choose to signal blindly.
v8: [ Maarten Lankhorst ] Tons of tiny fixes, moved __dma_fence_init to
header and fixed include mess. dma-fence.h now includes dma-buf.h
All members are now initialized, so kmalloc can be used for
allocating a dma-fence. More documentation added.
v9: Change compiler bitfields to flags, change return type of
enable_signaling to bool. Rework dma_fence_wait. Added
dma_fence_is_signaled and dma_fence_wait_timeout.
s/dma// and change exports to non GPL. Added fence_is_signaled and
fence_enable_sw_signaling calls, add ability to override default
wait operation.
v10: remove event_queue, use a custom list, export try_to_wake_up from
scheduler. Remove fence lock and use a global spinlock instead,
this should hopefully remove all the locking headaches I was having
on trying to implement this. enable_signaling is called with this
lock held.
v11:
Use atomic ops for flags, lifting the need for some spin_lock_irqsaves.
However I kept the guarantee that after fence_signal returns, it is
guaranteed that enable_signaling has either been called to completion,
or will not be called any more.
Add contexts and seqno to base fence implementation. This allows you
to wait for less fences, by testing for seqno + signaled, and then only
wait on the later fence.
Add FENCE_TRACE, FENCE_WARN, and FENCE_ERR. This makes debugging easier.
An CONFIG_DEBUG_FENCE will be added to turn off the FENCE_TRACE
spam, and another runtime option can turn it off at runtime.
v12:
Add CONFIG_FENCE_TRACE. Add missing documentation for the fence->context
and fence->seqno members.
v13:
Fixup CONFIG_FENCE_TRACE kconfig description.
Move fence_context_alloc to fence.
Simplify fence_later.
Kill priv member to fence_cb.
v14:
Remove priv argument from fence_add_callback, oops!
v15:
Remove priv from documentation.
Explicitly include linux/atomic.h.
v16:
Add trace events.
Import changes required by android syncpoints.
v17:
Use wake_up_state instead of try_to_wake_up. (Colin Cross)
Fix up commit description for seqno_fence. (Rob Clark)
v18:
Rename release_fence to fence_release.
Move to drivers/dma-buf/.
Rename __fence_is_signaled and __fence_signal to *_locked.
Rename __fence_init to fence_init.
Make fence_default_wait return a signed long, and fix wait ops too.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com> #use smp_mb__before_atomic()
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some systems require a larger maximum PAGE_SIZE order for CMA allocations.
To accommodate such systems, increase the upper-bound of the
CMA_ALIGNMENT range to 12 (which ends up being 16MB on systems with 4K
pages).
Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support for uevent_helper, aka hotplug, is not required on many systems
these days but it can still be enabled via sysfs or sysctl.
Reported-by: Darren Shepherd <darren.s.shepherd@gmail.com>
Signed-off-by: Michael Marineau <mike@marineau.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The x86 CPU feature modalias handling existed before it was reimplemented
generically. This patch aligns the x86 handling so that it
(a) reuses some more code that is now generic;
(b) uses the generic format for the modalias module metadata entry, i.e., it
now uses 'cpu:type:x86,venVVVVfamFFFFmodMMMM:feature:,XXXX,YYYY' instead of
the 'x86cpu:vendor:VVVV👪FFFF:model:MMMM:feature:,XXXX,YYYY' that was
used before.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for advertising optional CPU features over udev
using the modalias, and for declaring compatibility with/dependency upon
such a feature in a module.
The mapping between feature numbers and actual features should be provided
by the architecture in a file called <asm/cpufeature.h> which exports the
following functions/macros:
- cpu_feature(FEAT), a preprocessor macro that maps token FEAT to a
numeric index;
- bool cpu_have_feature(n), returning whether this CPU has support for
feature #n;
- MAX_CPU_FEATURES, an upper bound for 'n' in the previous function.
The feature can then be enabled by setting CONFIG_GENERIC_CPU_AUTOPROBE
for the architecture.
For instance, a module that registers its module init function using
module_cpu_feature_match(FEAT_X, module_init_function)
will be probed automatically when the CPU's support for the 'FEAT_X'
feature is advertised over udev, and will only allow the module to be
loaded by hand if the 'FEAT_X' feature is supported.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want to use CMA for allocating hash page table and real mode area for
PPC64. Hence move DMA contiguous related changes into a seperate config
so that ppc64 can enable CMA without requiring DMA contiguous.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[removed defconfig changes]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off. Remove all the remaining references to it.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a new kconfig, CONFIG_FW_LOADER_USER_HELPER, and
guards the user-helper codes in firmware_class.c with ifdefs.
Yeah, yeah, there are lots of ifdefs in this patch. The further
clean-up with code shuffling follows in the next.
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This pulls in the various driver core changes that were in 3.7-rc3 into the
driver-core-next branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kconfig lists CMA_SIZE_SEL_ABSOLUTE as the default value fo the CMA
selected region size, but that option isn't available in the defined
choices. Set the default to CMA_SIZE_SEL_MBYTES instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
mm/page_alloc.c has some memory isolation functions but they are used only
when we enable CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}. So let's make
it configurable by new CONFIG_MEMORY_ISOLATION so that it can reduce
binary size and we can check it simple by CONFIG_MEMORY_ISOLATION, not if
defined CONFIG_{CMA|MEMORY_HOTPLUG|MEMORY_FAILURE}.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Contiguous Memory Allocator is a set of helper functions for DMA
mapping framework that improves allocations of contiguous memory chunks.
CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type
and gives back to the system. Kernel is allowed to allocate only movable
pages within CMA's managed memory so that it can be used for example for
page cache when DMA mapping do not use it. On
dma_alloc_from_contiguous() request such pages are migrated out of CMA
area to free required contiguous block and fulfill the request. This
allows to allocate large contiguous chunks of memory at any time
assuming that there is enough free memory available in the system.
This code is heavily based on earlier works by Michal Nazarewicz.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
Traditionally, any System-on-Chip based platform creates a flat list
of platform_devices directly under /sys/devices/platform.
In order to give these some better structure, this introduces a new
bus type for soc_devices that are registered with the new
soc_device_register() function. All devices that are on the same
chip should then be registered as child devices of the soc device.
The soc bus also exports a few standardised device attributes which
allow user space to query the specific type of soc.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
do not register a CPU device. Add the config option GENERIC_CPU_DEVICES
which causes a generic CPU device to be registered for each present CPU,
and make all these architectures select it.
Richard Weinberger <richard@nod.at> covered UML and suggested using
per_cpu.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark dma-buf buffer sharing API as EXPERIMENTAL for first release.
We will remove this in later versions, once it gets smoothed out
and has more users.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is the first step in defining a dma buffer sharing mechanism.
A new buffer object dma_buf is added, with operations and API to allow easy
sharing of this buffer object across devices.
The framework allows:
- creation of a buffer object, its association with a file pointer, and
associated allocator-defined operations on that buffer. This operation is
called the 'export' operation.
- different devices to 'attach' themselves to this exported buffer object, to
facilitate backing storage negotiation, using dma_buf_attach() API.
- the exported buffer object to be shared with the other entity by asking for
its 'file-descriptor (fd)', and sharing the fd across.
- a received fd to get the buffer object back, where it can be accessed using
the associated exporter-defined operations.
- the exporter and user to share the scatterlist associated with this buffer
object using map_dma_buf and unmap_dma_buf operations.
Atleast one 'attach()' call is required to be made prior to calling the
map_dma_buf() operation.
Couple of building blocks in map_dma_buf() are added to ease introduction
of sync'ing across exporter and users, and late allocation by the exporter.
For this first version, this framework will work with certain conditions:
- *ONLY* exporter will be allowed to mmap to userspace (outside of this
framework - mmap is not a buffer object operation),
- currently, *ONLY* users that do not need CPU access to the buffer are
allowed.
More details are there in the documentation patch.
This is based on design suggestions from many people at the mini-summits[1],
most notably from Arnd Bergmann <arnd@arndb.de>, Rob Clark <rob@ti.com> and
Daniel Vetter <daniel@ffwll.ch>.
The implementation is inspired from proof-of-concept patch-set from
Tomasz Stanislawski <t.stanislaws@samsung.com>, who demonstrated buffer sharing
between two v4l2 devices. [2]
[1]: https://wiki.linaro.org/OfficeofCTO/MemoryManagement
[2]: http://lwn.net/Articles/454389
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-and-Tested-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
updated Documentation/ja_JP/SubmittingPatches
debugfs: add documentation for debugfs_create_x64
uio: uio_pdrv_genirq: Add OF support
firmware: gsmi: remove sysfs entries when unload the module
Documentation/zh_CN: Fix messy code file email-clients.txt
driver core: add more help description for "path to uevent helper"
driver-core: modify FIRMWARE_IN_KERNEL help message
driver-core: Kconfig grammar corrections in firmware configuration
DOCUMENTATION: Replace create_device() with device_create().
DOCUMENTATION: Update overview.txt in Doc/driver-model.
pti: pti_tty_install documentation mispelling.
There are many places in the tree where we implement register access for
devices on non-memory mapped buses, especially I2C and SPI. Since hardware
designers seem to have settled on a relatively consistent set of register
interfaces this can be effectively factored out into shared code. There
are a standard set of formats for marshalling data for exchange with the
device, with the actual I/O mechanisms generally being simple byte
streams.
We create an abstraction for marshaling data into formats which can be
sent on the control interfaces, and create a standard method for
plugging in actual transport underneath that.
This is mostly a refactoring and renaming of the bottom level of the
existing code for sharing register I/O which we have in ASoC. A
subsequent patch in this series converts ASoC to use this. The main
difference in interface is that reads return values by writing to a
location provided by a pointer rather than in the return value, ensuring
we can use the full range of the type for register data. We also use
unsigned types rather than ints for the same reason.
As some of the devices can have very large register maps the existing
ASoC code also contains infrastructure for managing register caches.
This cache work will be moved over in a future stage to allow for
separate review, the current patch only deals with the physical I/O.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
The kernel configuration UEVENT_HELPER_PATH is a string to
the uevent helper program. Add more description about how
to disable this feature and how to enable it again during
runtime.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The help message for the configuration variable was inconsistent
with the way "make firmware_install" really works.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix some grammatical errors and reword a few sentences.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since suspend, resume and shutdown operations in struct sysdev_class
and struct sysdev_driver are not used any more, remove them. Also
drop sysdev_suspend(), sysdev_resume() and sysdev_shutdown() used
for executing those operations and modify all of their users
accordingly. This reduces kernel code size quite a bit and reduces
its complexity.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Introduce Kconfig option allowing architectures where sysdev
operations used during system suspend, resume and shutdown have been
completely replaced with struct sycore_ops operations to avoid
building sysdev code that will never be used.
Make callbacks in struct sys_device and struct sysdev_driver depend
on ARCH_NO_SYSDEV_OPS to allows us to verify if all of the references
have been actually removed from the code the given architecture
depends on.
Make x86 select ARCH_NO_SYSDEV_OPS.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.
This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel. A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).
Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kconfig dependency warning for FW_LOADER.
Lots of drivers select FW_LOADER without bothering to depend on
HOTPLUG and/or without selecting HOTPLUG. A kernel builds fine
when FW_LOADER is enabled, whether HOTPLUG is enabled or not, and
a kernel config file (make oldconfig) is not changed by this patch.
(Yes, drivers/base/firmware_class.c uses interfaces from linux/kobject.h,
which does have some CONFIG_HOTPLUG dependencies, but this patch does
not change that.)
warning: (MICROCODE || MICROCODE_INTEL && MICROCODE || MICROCODE_AMD && MICROCODE || PCMCIA_LOAD_CIS && PCCARD && PCMCIA && EXPERIMENTAL || USB_IRDA && NET && IRDA && USB || BT_HCIBCM203X && NET && BT && USB || BT_HCIBFUSB && NET && BT && USB || BT_HCIBT3C && NET && BT && PCMCIA || BT_MRVL_SDIO && NET
...
!STAGING_EXCLUDE_BUILD && USB && (X86 || ARM) && WLAN || DRM_NOUVEAU && STAGING && !STAGING_EXCLUDE_BUILD && DRM && PCI || TI_ST && STAGING && !STAGING_EXCLUDE_BUILD && RFKILL || DELL_RBU && X86) selects FW_LOADER which has unmet direct dependencies (HOTPLUG)
(5200 byte line reduced a lot)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make devtmpfs available on (embedded) configurations without SHMEM/TMPFS,
using ramfs instead.
Saves ~15KB.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No recent mainstream system uses the /sbin/hotplug fork-bomb any more.
Disable it by default to reflect how it is used these days.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All major distros enable devtmpfs on recent systems, so remove
the EXPERIMENTAL flag, and make the description a bit more instructive.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Devtmpfs lets the kernel create a tmpfs instance called devtmpfs
very early at kernel initialization, before any driver-core device
is registered. Every device with a major/minor will provide a
device node in devtmpfs.
Devtmpfs can be changed and altered by userspace at any time,
and in any way needed - just like today's udev-mounted tmpfs.
Unmodified udev versions will run just fine on top of it, and will
recognize an already existing kernel-created device node and use it.
The default node permissions are root:root 0600. Proper permissions
and user/group ownership, meaningful symlinks, all other policy still
needs to be applied by userspace.
If a node is created by devtmps, devtmpfs will remove the device node
when the device goes away. If the device node was created by
userspace, or the devtmpfs created node was replaced by userspace, it
will no longer be removed by devtmpfs.
If it is requested to auto-mount it, it makes init=/bin/sh work
without any further userspace support. /dev will be fully populated
and dynamic, and always reflect the current device state of the kernel.
With the commonly used dynamic device numbers, it solves the problem
where static devices nodes may point to the wrong devices.
It is intended to make the initial bootup logic simpler and more robust,
by de-coupling the creation of the inital environment, to reliably run
userspace processes, from a complex userspace bootstrap logic to provide
a working /dev.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Tested-By: Harald Hoyer <harald@redhat.com>
Tested-By: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
James Bottomley recently discovered that we have
{request,release}_firmware() dummies for the case of the actual
functions not being available and has a fix for the bug that was
actually causing build errors for built-in users with
CONFIG_FW_LOADER=m.
But now missing selects on FW_LOADER are no longer visible at
compile-time at all and can become runtime problems.
FW_LOADER is infrastructure with relatively small codesize we can safely
enable for everyone, and only for people who really need small kernels
(and can be expected to know what they are doing) it matters being able
to disable it.
This patch therefore always sets FW_LOADER=y and allows users only to
disable it with EMBEDDED=y.
As a bonus, we can then get rid of all "select FW_LOADER" plus the due
to it required "depends on HOTPLUG" which removes some complexity from
our Kconfig files.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This will control whether we build firmware into the kernel image for
_every_ driver which we convert to request_firmware(), to avoid a
proliferation of 'CONFIG_XXX_FIRMWARE' options for each one.
Default to 'y' for now, which is the wrong thing to do but people seem
to be insisting on it and refusing to even review patches until it's
done. And it does preserve the existing behaviour for built-in drivers.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This allows arbitrary firmware files to be included in the static kernel
where the firmware loader can find them without requiring userspace to
be alive.
(Updated and CONFIG_EXTRA_FIRMWARE_DIR added with lots of help from
Johannes Berg).
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
The kernel creates a process for every event that is send, even when
there is no binary it could execute. We are needlessly creating around
200-300 failing processes during early bootup, until we have the chance
to disable it from userspace.
This change allows us to disable /sbin/hotplug entirely, if you want to,
by setting UEVENT_HELPER_PATH="" in the kernel config.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implement device resource management, in short, devres. A device
driver can allocate arbirary size of devres data which is associated
with a release function. On driver detach, release function is
invoked on the devres data, then, devres data is freed.
devreses are typed by associated release functions. Some devreses are
better represented by single instance of the type while others need
multiple instances sharing the same release function. Both usages are
supported.
devreses can be grouped using devres group such that a device driver
can easily release acquired resources halfway through initialization
or selectively release resources (e.g. resources for port 1 out of 4
ports).
This patch adds devres core including documentation and the following
managed interfaces.
* alloc/free : devm_kzalloc(), devm_kzfree()
* IO region : devm_request_region(), devm_release_region()
* IRQ : devm_request_irq(), devm_free_irq()
* DMA : dmam_alloc_coherent(), dmam_free_coherent(),
dmam_declare_coherent_memory(), dmam_pool_create(),
dmam_pool_destroy()
* PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed()
* iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(),
devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(),
pcim_iomap(), pcim_iounmap()
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Put SYS_HYPERVISOR inside the Generic Driver Config menu where it should
be. Otherwise xconfig displays it as a dangling (lost) menu item under
Device Drivers, all by itself (when all options are displayed).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <holzheu@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's useful to be able to turn off CONFIG_HOTPLUG for compile-coverage testing
and for section-checking coverage. But a few things go and select
CONFIG_HOTPLUG, making it a royal PITA to turn the thing off.
It's only turnable offable if CONFIG_EMBEDDED anyway. So let's make those
things depend on HOTPLUG, not select it.
Cc: Greg KH <greg@kroah.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To have a home for all hypervisors, this patch creates /sys/hypervisor.
A new config option SYS_HYPERVISOR is introduced, which should to be set
by architecture dependent hypervisors (e.g. s390 or Xen).
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>