mirror of https://gitee.com/openkylin/linux.git
7192 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
42dec9a936 |
Perf events changes in this cycle were:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability enumeration method
introduced on the latest Intel platforms. This table is in a well-defined PCI
namespace location and is read via MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter blocks, but
fancier counters still need to be enumerated explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of 'hybrid' CPUs
and PMUs. Alder Lake is a mix of Golden Cove ('big') and Gracemont ('small' - Atom derived)
cores.
The CPU-side feature set is entirely symmetrical - but on the PMU side there's
core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX profiling, by
fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The immediate motivation
is to support low-overhead sampling-based race detection for user-space code. The
feature consists of the following main changes:
- Add thread-only event inheritance via perf_event_attr::inherit_thread, which limits
inheritance of events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap, extend siginfo with an u64
::si_perf, and add the breakpoint information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the new field can be used
to introduce support for other types of metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NhQ7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability
enumeration method introduced on the latest Intel platforms. This
table is in a well-defined PCI namespace location and is read via
MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter
blocks, but fancier counters still need to be enumerated
explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of
'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
and Gracemont ('small' - Atom derived) cores.
The CPU-side feature set is entirely symmetrical - but on the PMU
side there's core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX
profiling, by fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The
immediate motivation is to support low-overhead sampling-based race
detection for user-space code. The feature consists of the following
main changes:
- Add thread-only event inheritance via
perf_event_attr::inherit_thread, which limits inheritance of
events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via
perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
extend siginfo with an u64 ::si_perf, and add the breakpoint
information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the
new field can be used to introduce support for other types of
metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
signal, perf: Add missing TRAP_PERF case in siginfo_layout()
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
perf/x86: Allow for 8<num_fixed_counters<16
perf/x86/rapl: Add support for Intel Alder Lake
perf/x86/cstate: Add Alder Lake CPU support
perf/x86/msr: Add Alder Lake CPU support
perf/x86/intel/uncore: Add Alder Lake support
perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
perf/x86/intel: Add Alder Lake Hybrid support
perf/x86: Support filter_match callback
perf/x86/intel: Add attr_update for Hybrid PMUs
perf/x86: Add structures for the attributes of Hybrid PMUs
perf/x86: Register hybrid PMUs
perf/x86: Factor out x86_pmu_show_pmu_cap
perf/x86: Remove temporary pmu assignment in event_init
perf/x86/intel: Factor out intel_pmu_check_extra_regs
perf/x86/intel: Factor out intel_pmu_check_event_constraints
perf/x86/intel: Factor out intel_pmu_check_num_counters
perf/x86: Hybrid PMU support for extra_regs
perf/x86: Hybrid PMU support for event constraints
...
|
|
|
Linus Torvalds
|
9a45da9270 |
RCU changes for this cycle were:
- Bitmap support for "N" as alias for last bit - kvfree_rcu updates - mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.) - RCU callback offloading update - Polling RCU grace-period interfaces - Realtime-related RCU updates - Tasks-RCU updates - Torture-test updates - Torture-test scripting updates - Miscellaneous fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmCJCZERHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1hRjw/+Jkb9KvR9odPt/zqN/KPtIlburCUWgsFb 2zAlWN4uMocPAiXT2Xq58/8gqMkpyn7ZVZtL1tD8fZSvlwEr0U8Z74+/NdoQvYE+ kMXIYIuhIAGRyAupmzkriqN33iY+BSZPacX3u6ziPj57/0OZzbWVN/DAhbuvyLqG J/oL4PHCa7XAqXbf95rd5Zjs680QJ3CbTRh4nA8uHArzJmKZOaaHJ05Pxd1LpULe SJ+5p1GQnnwxd1HqmlHMDu/dW+2hE35BGykF8zi78je9OJXualDoM/6JpIYGhMNY 5qlhU55QYP1jzjuNGVZZUS4L77eS2/W7SpPAaTmMEy/SsVB59G8Kf22oNDpVaEqQ m+2ErqwaHvlkMjqnsx+JQbsOP0yCi2NZBoEPFdfk1H23E2deVlSDbxPso4Zb1oUD E12769kN+SWDytuLSOAe1PY/KXqmNUKjPZl1GDCGXL7HlCnWyggUDschTsKJa19O XXl+yCTGMUH4XAPSqavAKQbBjurqpT6i4zfooSH4TBtOHm1ExgZOUS8gglZ1JuJd q+uJdZIgS8BcGkGw/k1bYDWY5TA4Rjv3sAOKQL1PgYBl1t/yLK441mE7LI9gWOwz Crz7vlSxD6Jc2cYQeUVW0KPGt5aVd63Gd9HjpXxGkqYQSDRqYMCebHEAGagz+jj7 Nv/nOnf34Uc= =mpNt -----END PGP SIGNATURE----- Merge tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: - Support for "N" as alias for last bit in bitmap parsing library (eg using syntax like "nohz_full=2-N") - kvfree_rcu updates - mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.) - RCU callback offloading update - Polling RCU grace-period interfaces - Realtime-related RCU updates - Tasks-RCU updates - Torture-test updates - Torture-test scripting updates - Miscellaneous fixes * tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu() rcu: Provide polling interfaces for Tiny RCU grace periods torture: Fix kvm.sh --datestamp regex check torture: Consolidate qemu-cmd duration editing into kvm-transform.sh torture: Print proper vmlinux path for kvm-again.sh runs torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment torture: Make kvm-transform.sh update jitter commands torture: Add --duration argument to kvm-again.sh torture: Add kvm-again.sh to rerun a previous torture-test torture: Create a "batches" file for build reuse torture: De-capitalize TORTURE_SUITE torture: Make upper-case-only no-dot no-slash scenario names official torture: Rename SRCU-t and SRCU-u to avoid lowercase characters torture: Remove no-mpstat error message torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs torture: Record jitter start/stop commands torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd torture: Abstract jitter.sh start/stop into scripts rcu: Provide polling interfaces for Tree RCU grace periods ... |
|
|
Linus Torvalds
|
1e9599dfc4 |
linux-kselftest-kunit-5.13-rc1
This KUnit update for Linux 5.13-rc1 consists of several fixes and
new feature to support failure from dynamic analysis tools such as
UBSAN and fake ops for testing.
- a fake ops struct for testing a "free" function to complain if it
was called with an invalid argument, or caught a double-free. Most
return void and have no normal means of signalling failure
(e.g. super_operations, iommu_ops, etc.).
-----BEGIN PGP SIGNATURE-----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=aP5e
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes and a new feature to support failure from dynamic
analysis tools such as UBSAN and fake ops for testing.
- a fake ops struct for testing a "free" function to complain if it
was called with an invalid argument, or caught a double-free. Most
return void and have no normal means of signalling failure (e.g.
super_operations, iommu_ops, etc.)"
* tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: add tips for using current->kunit_test
kunit: fix -Wunused-function warning for __kunit_fail_current_test
kunit: support failure from dynamic analysis tools
kunit: tool: make --kunitconfig accept dirs, add lib/kunit fragment
kunit: make KUNIT_EXPECT_STREQ() quote values, don't print literals
kunit: Match parenthesis alignment to improve code readability
|
|
|
Linus Torvalds
|
2a68c268a1 |
linux-kselftest-next-5.13-rc1
This Kselftest update for Linux 5.13-rc1 consists of: - fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre - fixes to Kselftest documentation, framework - minor spelling correction in timers test -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmCIls8ACgkQCwJExA0N QxzrDg/9E2+KrNsqT/bVZIDZgPsLOPtkIaNd+94wsGKgHUSekoHRYKcmeRZLLA3x m6s4Jc8o84rztRgjjttWCOQD3ICsFC5Dp4eu2f8YowlPqPRn0MMJEUwQAPhxnFq0 44KQ2v7bJhXYZRwhZXcv1Gu1o3o6cx59X9pLFo/Yf/OeTHj7ulegWtjCvBcS2uuT bhI0YbiCKDE4gIXYLPWKD96JjLRVo5zYnMIRqDJrgf7xSr+xoKmsZKSgkt6ca+My KSYtkaXDEB1DFNoovDQyhmAwImeqWgEKPMZIblLyfoUJNRyBQg9flRvguBzgR3TM J1lvavNZSC7qgx9xQI4DjsHtpn9y9C5/k9vXauhVtdMpMGY6zrz2zN5/xOohXjzN vlonhp6G/wkfxuo0Dcr++Oqlw5wWt55hxFJm84rIQ/2IYUfRBKWV5c2mUKRUJzrr pT3fcIpN1WTEBaxvC4/aL5oLvF/RSArSKs7StX1uzkedy7IwPsiCJa5OgT2iNSbH tpDS9KNOiLIkwpr8dBF9O9WRBo8ZtUoB1OPqQWuc0PMa0RDT4i/oTwe0ulu5rWma 5G3yQIilTsRAxpFWihklBiV0pB9bT8O/d8kMlagj/znl8GmKyiXEMDwrCPfVmp16 zNMskcarXWgL+BdhnSX5j53tLL6MEAWS1RzweR62U20eyPJF34Y= =0VC+ -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: - fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre - fixes to Kselftest documentation, framework - minor spelling correction in timers test * tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits) selftests/resctrl: Change a few printed messages Documentation: kselftest: fix path to test module files selftests/resctrl: Create .gitignore to include resctrl_tests selftests/resctrl: Fix checking for < 0 for unsigned values selftests/resctrl: Fix incorrect parsing of iMC counters selftests/resctrl: Fix unmount resctrl FS selftests/resctrl: Skip the test if requested resctrl feature is not supported selftests/resctrl: Modularize resctrl test suite main() function selftests/resctrl: Don't hard code value of "no_of_bits" variable selftests/resctrl: Fix MBA/MBM results reporting format selftests/resctrl: Use resctrl/info for feature detection selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported selftests/resctrl: Add config dependencies selftests/resctrl: Fix a printed message selftests/resctrl: Share show_cache_info() by CAT and CMT tests selftests/resctrl: Call kselftest APIs to log test results selftests/resctrl: Rename CQM test as CMT test selftests/resctrl: Fix missing options "-n" and "-p" selftests/resctrl: Ensure sibling CPU is not same as original CPU selftests/resctrl: Clean up resctrl features check ... |
|
|
Linus Torvalds
|
c01c0716cc |
Driver core changes for 5.13-rc1
Here is the "big" set of driver core changes for 5.13-rc1.
Nothing major, just lots of little core changes and cleanups, notable
things are:
- finally set fw_devlink=on by default. All reported issues
with this have been shaken out over the past 9 months or so,
but we will be paying attention to any fallout here in case we
need to revert this as the default boot value (symptoms of
problems are a simple lack of booting)
- fixes found to be needed by fw_devlink=on value in some
subsystems (like clock).
- delayed work initialization cleanup
- driver core cleanups and minor updates
- software node cleanups and tweaks
- devtmpfs cleanups
- minor debugfs cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYIazPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylzUwCguQ+VUs1d0voq/oKiqR+lbXnQf3kAn0jf/eom
ucRSdeIc21eEE83Ei9aZ
=pchl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.13-rc1.
Nothing major, just lots of little core changes and cleanups, notable
things are:
- finally set 'fw_devlink=on' by default.
All reported issues with this have been shaken out over the past 9
months or so, but we will be paying attention to any fallout here
in case we need to revert this as the default boot value (symptoms
of problems are a simple lack of booting)
- fixes found to be needed by fw_devlink=on value in some subsystems
(like clock).
- delayed work initialization cleanup
- driver core cleanups and minor updates
- software node cleanups and tweaks
- devtmpfs cleanups
- minor debugfs cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (53 commits)
devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc
PM / wakeup: use dev_set_name() directly
software node: Allow node addition to already existing device
kunit: software node: adhear to KUNIT formatting standard
node: fix device cleanups in error handling code
kobject_uevent: remove warning in init_uevent_argv()
debugfs: Make debugfs_allow RO after init
Revert "driver core: platform: Make platform_get_irq_optional() optional"
media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE()
software node: Introduce SOFTWARE_NODE_REFERENCE() helper macro
software node: Imply kobj_to_swnode() to be no-op
software node: Deduplicate code in fwnode_create_software_node()
software node: Introduce software_node_alloc()/software_node_free()
software node: Free resources explicitly when swnode_register() fails
debugfs: drop pointless nul-termination in debugfs_read_file_bool()
driver core: add helper for deferred probe reason setting
driver core: Improve fw_devlink & deferred_probe_timeout interaction
of: property: fw_devlink: Add support for remote-endpoint
driver core: platform: Make platform_get_irq_optional() optional
driver core: Replace printf() specifier and drop unneeded casting
...
|
|
|
Linus Torvalds
|
31a24ae89c |
arm64 updates for 5.13:
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not allow
precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON in
softirq context for crypto performance improvements. The conditional
yield support is modified to take softirqs into account and reduce the
latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers, new
functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
-----BEGIN PGP SIGNATURE-----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=6NGI
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not
allow precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON
in softirq context for crypto performance improvements. The
conditional yield support is modified to take softirqs into account
and reduce the latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
new functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64: pac: Optimize kernel entry/exit key installation code paths
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
arm64/sve: Remove redundant system_supports_sve() tests
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
kasan, arm64: tests supports for HW_TAGS async mode
arm64: mte: Report async tag faults before suspend
arm64: mte: Enable async tag check fault
arm64: mte: Conditionally compile mte_enable_kernel_*()
arm64: mte: Enable TCO in functions that can read beyond buffer limits
kasan: Add report for async mode
arm64: mte: Drop arch_enable_tagging()
kasan: Add KASAN mode kernel parameter
arm64: mte: Add asynchronous mode support
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
...
|
|
|
Linus Torvalds
|
eea2647e74 |
Entry code update:
Provide support for randomized stack offsets per syscall to make stack-based attacks harder which rely on the deterministic stack layout. The feature is based on the original idea of PaX's RANDSTACK feature, but uses a significantly different implementation. The offset does not affect the pt_regs location on the task stack as this was agreed on to be of dubious value. The offset is applied before the actual syscall is invoked. The offset is stored per cpu and the randomization happens at the end of the syscall which is less predictable than on syscall entry. The mechanism to apply the offset is via alloca(), i.e. abusing the dispised VLAs. This comes with the drawback that stack-clash-protection has to be disabled for the affected compilation units and there is also a negative interaction with stack-protector. Those downsides are traded with the advantage that this approach does not require any intrusive changes to the low level assembly entry code, does not affect the unwinder and the correct stack alignment is handled automatically by the compiler. The feature is guarded with a static branch which avoids the overhead when disabled. Currently this is supported for X86 and ARM64. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmCGjz8THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoWsvD/4tGnPAurd6lbzxWzRjW7jOOVyzkODM UXtIxxICaj7o6MNcloaGe1QtJ8+QOCw3yPQfLG/SoWHse5+oUKQRL9dmWVeJyRSt JZ1pirkKqWrB+OmPbJKUiO3/TsZ2Z/vO41JVgVTL5/HWhOECSDzZsJkuvF/H+qYD ReDzd7FUNd76pwVOsXq/cxXclRa81/wMNZRVwmyAwFYE2XoPtQyTERTLrfj6aQKF P0txr9fEjYlPPwYOk1kjBAoJfDltNm48BBL7CGZtRlsqpNpdsJ1MkeGffhodb6F0 pJYQMlQJHXABZb5GF+v93+iASDpRFn0EvPmLkCxQUfZYLOkRsnuEF2S/fsYX/WPo uin/wQKwLVdeQq9d9BwlZUKEgsQuV7Q0GVN+JnEQerwD6cWTxv4a1RIUH+K/4Wo5 nTeJVRKcs6m7UkGQRm8JbqnUP0vCV+PSiWWB8J9CmjYeCPbkGjt6mBIsmPaDZ9VL 4i+UX5DJayoREF/rspOBcJftUmExize49p9860UI9N6fd7DsDt7Dq9Ai+ADtZa4C 9BPbF4NWzJq8IWLqBi+PpKBAT3JMX9qQi7s9sbrRxpxtew9Keu5qggKZJYumX71V qgUMk+xB86HZOrtF6F3oY0zxYv3haPvDydsDgqojtqNGk4PdAdgDYJQwMlb8QSly SwIWPHIfvP4R9w== =GMlJ -----END PGP SIGNATURE----- Merge tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull entry code update from Thomas Gleixner: "Provide support for randomized stack offsets per syscall to make stack-based attacks harder which rely on the deterministic stack layout. The feature is based on the original idea of PaX's RANDSTACK feature, but uses a significantly different implementation. The offset does not affect the pt_regs location on the task stack as this was agreed on to be of dubious value. The offset is applied before the actual syscall is invoked. The offset is stored per cpu and the randomization happens at the end of the syscall which is less predictable than on syscall entry. The mechanism to apply the offset is via alloca(), i.e. abusing the dispised VLAs. This comes with the drawback that stack-clash-protection has to be disabled for the affected compilation units and there is also a negative interaction with stack-protector. Those downsides are traded with the advantage that this approach does not require any intrusive changes to the low level assembly entry code, does not affect the unwinder and the correct stack alignment is handled automatically by the compiler. The feature is guarded with a static branch which avoids the overhead when disabled. Currently this is supported for X86 and ARM64" * tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64: entry: Enable random_kstack_offset support lkdtm: Add REPORT_STACK for checking stack offsets x86/entry: Enable random_kstack_offset support stack: Optionally randomize kernel stack offset each syscall init_on_alloc: Optimize static branches jump_label: Provide CONFIG-driven build state defaults |
|
|
Linus Torvalds
|
87dcebff92 |
The time and timers updates contain:
Core changes:
- Allow runtime power management when the clocksource is changed.
- A correctness fix for clock_adjtime32() so that the return value
on success is not overwritten by the result of the copy to user.
- Allow late installment of broadcast clockevent devices which was
broken because nothing switched them over to oneshot mode. This went
unnoticed so far because clockevent devices used to be built in, but
now people started to make them modular.
- Debugfs related simplifications
- Small cleanups and improvements here and there
Driver changes:
- The usual set of device tree binding updates for a wide range
of drivers/devices.
- The usual updates and improvements for drivers all over the place but
nothing outstanding.
- No new clocksource/event drivers. They'll come back next time.
-----BEGIN PGP SIGNATURE-----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=F6Du
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The time and timers updates contain:
Core changes:
- Allow runtime power management when the clocksource is changed.
- A correctness fix for clock_adjtime32() so that the return value on
success is not overwritten by the result of the copy to user.
- Allow late installment of broadcast clockevent devices which was
broken because nothing switched them over to oneshot mode. This
went unnoticed so far because clockevent devices used to be built
in, but now people started to make them modular.
- Debugfs related simplifications
- Small cleanups and improvements here and there
Driver changes:
- The usual set of device tree binding updates for a wide range of
drivers/devices.
- The usual updates and improvements for drivers all over the place
but nothing outstanding.
- No new clocksource/event drivers. They'll come back next time"
* tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
posix-timers: Preserve return value in clock_adjtime32()
tick/broadcast: Allow late registered device to enter oneshot mode
tick: Use tick_check_replacement() instead of open coding it
time/timecounter: Mark 1st argument of timecounter_cyc2time() as const
dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer
clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init
clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak
clocksource/drivers/npcm: Add support for WPCM450
clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3
clocksource/drivers/pistachio: Fix trivial typo
clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
clocksource/drivers/timer-ti-dm: Fix posted mode status check order
dt-bindings: timer: renesas,cmt: Document R8A77961
dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support
clocksource/drivers/ingenic-ost: Add support for the JZ4760B
clocksource/drivers/ingenic: Add support for the JZ4760
dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B)
...
|
|
|
Linus Torvalds
|
81a489790a |
Add the guest side of SGX support in KVM guests. Work by Sean
Christopherson, Kai Huang and Jarkko Sakkinen. Along with the usual fixes, cleanups and improvements. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGlgYACgkQEsHwGGHe VUqbYA/+IgX7uBkATndzTBL6l/D3QQaMRUkOk5nO9sOzQaYJ/Qwarfakax61CZrl dZFdF07T/kSpMXQ6HIjzEaRx6j12xMYksrm8xBBSfXjtkIYu4auVloX2ldKhHwaK OyiKS+R0O/Q7XvozEiPsQCf7XwraZFO+iMJ0jMxbPO7ZvxDXDBv0Fx3d9yzPx9Qg BbJuIEKMoFPR3P39CWw0cOXr12Z9mmFReBKoSV4dZbZMRmv7FrA/Qlc+uS+RNZFK /5sCn7x27qVx8Ha/Lh42kQf+yqv1l3437aqmG2vAbHQPmnbDmBeApZ6jhaoX3jhD 9ylkcpWFFf26oSbYAdmztZENLXRWLH6OIPxtmbf2HMsROiNR/cV0s4d2aduN/dHz s1VnaDFayoub9CPWtiv0RJJnwmB6d+wF2JbQGh+kPZMX3VaxVPwTVLWQdsAVaB8Y y7A2vZeWWHvP1a7ATbTFRDlTKKV3qDpMTD1B+hFELLNjMvyDU5c/1GhrIh0o1Jo3 jGrauylSInMxDkpDTDhQqU+/CSnV03zdzq1DSzxgig2Q0Es6pKxQHbL0honTf0GJ l+8nefsQqRguZ1rVeuuSYvGPF++eqfyOiTZgN4fWdtZWJKMabsPNUbc4U3sP0/Sn oe3Ixo2F41E9++MODF1G80DKLD/mVLYxdzC91suOmgfB2gbRhSg= =KFYo -----END PGP SIGNATURE----- Merge tag 'x86_sgx_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX updates from Borislav Petkov: "Add the guest side of SGX support in KVM guests. Work by Sean Christopherson, Kai Huang and Jarkko Sakkinen. Along with the usual fixes, cleanups and improvements" * tag 'x86_sgx_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/sgx: Mark sgx_vepc_vm_ops static x86/sgx: Do not update sgx_nr_free_pages in sgx_setup_epc_section() x86/sgx: Move provisioning device creation out of SGX driver x86/sgx: Add helpers to expose ECREATE and EINIT to KVM x86/sgx: Add helper to update SGX_LEPUBKEYHASHn MSRs x86/sgx: Add encls_faulted() helper x86/sgx: Add SGX2 ENCLS leaf definitions (EAUG, EMODPR and EMODT) x86/sgx: Move ENCLS leaf definitions to sgx.h x86/sgx: Expose SGX architectural definitions to the kernel x86/sgx: Initialize virtual EPC driver even when SGX driver is disabled x86/cpu/intel: Allow SGX virtualization without Launch Control support x86/sgx: Introduce virtual EPC for use by KVM guests x86/sgx: Add SGX_CHILD_PRESENT hardware error code x86/sgx: Wipe out EREMOVE from sgx_free_epc_page() x86/cpufeatures: Add SGX1 and SGX2 sub-features x86/cpufeatures: Make SGX_LC feature bit depend on SGX bit x86/sgx: Remove unnecessary kmap() from sgx_ioc_enclave_init() selftests/sgx: Use getauxval() to simplify test code selftests/sgx: Improve error detection and messages x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page() ... |
|
|
Linus Torvalds
|
98ee795b21 |
A new kcpuid tool to dump the raw CPUID leafs of a CPU. It has the CPUID
bit definitions in a separate csv file which allows for adding support for new CPUID leafs and bits without having to update the tool. The main use case for the tool is hw enablement on preproduction x86 hw. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmCGjgsACgkQEsHwGGHe VUo7Ng//YbZgJk2RfRKLKnYbp0eZdzodyynxGZ101p81atsW7gsNeepKIwbWJ7Jb +gv34bolO8QB3wBmY5YTZgedEguiqcrNQ4DaT/DLlE0C96kY6k/+wYFAokYVlsSH ZffPymnEE9ZhWwg7sgN+oBEyxj/Fz3hY4nnjX2+qcIYg77pkt85fobQ5+pqfbbDB uemKQsaCHI5AH8R3u8PGVDR2wNvtYjofAjywFWl6qNpp+MEoeOGFVj4W6c6N+XNc Mq7Bli5Hb9jd0VrI0UhOr3em/2V3YWrlFBn+rnhmzYlpLHC9+5dvaiCugC8K5G0A U/iXPNyFjib6G1D38MDR0HfJtfgUK/xwqMZ61pQye9EspqCnMrMhnIMiS5mqNjFw JvpKHioQncIWO2MJEDVCfIvDmLjQ3Ms7VWeW8VgxPD7Vg/Gj9ZAzuMawEKi/w57C bRnWnQAlyopycIDdN/8R0saVVlWK3a1vZ5RlWM3GnuE83RUJ7Du0S28KRWP1pMy5 ac6qJUn0eVYsJzul6MGliTxU4THJpBut6vSMQnf2I3j4jSKq2Fx73MaypEEKuHck bB8EC6HgUWSfI2HIcUDAwJSaMhp/SkEKlg9OiatyTsWWJYUwilLOdBeN3By3skb9 y7hZdIwuyICiYg7T4Et0doa7IkBYJEJ+G3/wSw+IlstoMzado6g= =G/Um -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 tool update from Borislav Petkov: "A new kcpuid tool to dump the raw CPUID leafs of a CPU. It has the CPUID bit definitions in a separate csv file which allows for adding support for new CPUID leafs and bits without having to update the tool. The main use case for the tool is hw enablement on preproduction x86 hardware" * tag 'x86_misc_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/x86/kcpuid: Add AMD leaf 0x8000001E tools/x86/kcpuid: Check last token too selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S tools/x86/kcpuid: Add AMD Secure Encryption leaf tools/x86: Add a kcpuid tool to show raw CPU features |
|
|
Marco Elver
|
3ddb3fd8cd |
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
The alignment of a structure is that of its largest member. On
architectures like 32-bit Arm (but not e.g. 32-bit x86) 64-bit integers
will require 64-bit alignment and not its natural word size.
This means that there is no portable way to add 64-bit integers to
siginfo_t on 32-bit architectures without breaking the ABI, because
siginfo_t does not yet (and therefore likely never will) contain 64-bit
fields on 32-bit architectures. Adding a 64-bit integer could change the
alignment of the union after the 3 initial int si_signo, si_errno,
si_code, thus introducing 4 bytes of padding shifting the entire union,
which would break the ABI.
One alternative would be to use the __packed attribute, however, it is
non-standard C. Given siginfo_t has definitions outside the Linux kernel
in various standard libraries that can be compiled with any number of
different compilers (not just those we rely on), using non-standard
attributes on siginfo_t should be avoided to ensure portability.
In the case of the si_perf field, word size is sufficient since there is
no exact requirement on size, given the data it contains is user-defined
via perf_event_attr::sig_data. On 32-bit architectures, any excess bits
of perf_event_attr::sig_data will therefore be truncated when copying
into si_perf.
Since si_perf is intended to disambiguate events (e.g. encoding relevant
information if there are more events of the same type), 32 bits should
provide enough entropy to do so on 32-bit architectures.
For 64-bit architectures, no change is intended.
Fixes:
|
|
|
David S. Miller
|
b022654296 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2021-04-17 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 9 day(s) which contain a total of 8 files changed, 175 insertions(+), 111 deletions(-). The main changes are: 1) Fix a potential NULL pointer dereference in libbpf's xsk umem handling, from Ciara Loftus. 2) Mitigate a speculative oob read of up to map value size by tightening the masking window, from Daniel Borkmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Daniel Borkmann
|
d7a5091351 |
bpf: Update selftests to reflect new error states
Update various selftest error messages: * The 'Rx tried to sub from different maps, paths, or prohibited types' is reworked into more specific/differentiated error messages for better guidance. * The change into 'value -4294967168 makes map_value pointer be out of bounds' is due to moving the mixed bounds check into the speculation handling and thus occuring slightly later than above mentioned sanity check. * The change into 'math between map_value pointer and register with unbounded min value' is similarly due to register sanity check coming before the mixed bounds check. * The case of 'map access: known scalar += value_ptr from different maps' now loads fine given masks are the same from the different paths (despite max map value size being different). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Marco Elver
|
6216798bf9 |
selftests/perf_events: Add kselftest for remove_on_exec
Add kselftest to test that remove_on_exec removes inherited events from child tasks. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210408103605.1676875-9-elver@google.com |
|
|
Marco Elver
|
f2c3c32f45 |
selftests/perf_events: Add kselftest for process-wide sigtrap handling
Add a kselftest for testing process-wide perf events with synchronous SIGTRAP on events (using breakpoints). In particular, we want to test that changes to the event propagate to all children, and the SIGTRAPs are in fact synchronously sent to the thread where the event occurred. Note: The "signal_stress" test case is also added later in the series to perf tool's built-in tests. The test here is more elaborate in that respect, which on one hand avoids bloating the perf tool unnecessarily, but we also benefit from structured tests with TAP-compliant output that the kselftest framework provides. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210408103605.1676875-8-elver@google.com |
|
|
Greg Kroah-Hartman
|
a00fcbc115 |
Linux 5.12-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBzdS0eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDdAIAIpKH/tAHhH7s7QH m5ewgE8foP7M5Ue9fp3+JmbtaYSzhCAMcKhqGtat/zk5PvA9AoYCDXrTetfYtBHh LUOmhL9hcKItNobfkYBok6BiFjGUEL3HMqz5w+MUsMwnXIc4RXqfJmsQ932z9Kxf yDwe6ehIzJVrQLI/C0mTamYRHu2aiZ1VWzhKuT493rLeg0R2odCCIClPN+/QvCwb 8/sk6l1c8eOUYYMUzKFZifaZGb12qDjRt4pZmk51aMTzg0WCpElJG+7Uqr4QQhZP p6xeNuUQq6WwxtlDkmo79Uzkrurb5tN2/hZ1RcJhs3EdHfpR0MjIyH3Znnb31gnu 39VjHhg= =4KP/ -----END PGP SIGNATURE----- Merge tag 'v5.12-rc7' into driver-core-next We need the driver core fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Ingo Molnar
|
120b566d1d |
Merge branch 'for-mingo-rcu' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney: - Bitmap support for "N" as alias for last bit - kvfree_rcu updates - mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.) - RCU callback offloading update - Polling RCU grace-period interfaces - Realtime-related RCU updates - Tasks-RCU updates - Torture-test updates - Torture-test scripting updates - Miscellaneous fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Linus Torvalds
|
4e04e7513b |
Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees. No scary regressions here
or in the works, but small fixes for 5.12 changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params
from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding
the rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related
tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool
memory model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SHL0
-----END PGP SIGNATURE-----
Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees.
No scary regressions here or in the works, but small fixes for 5.12
changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt"
* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
net: fix hangup on napi_disable for threaded napi
net: hns3: Trivial spell fix in hns3 driver
lan743x: fix ethernet frame cutoff issue
net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
net: dsa: lantiq_gswip: Don't use PHY auto polling
net: sched: sch_teql: fix null-pointer dereference
ipv6: report errors for iftoken via netlink extack
net: sched: fix err handler in tcf_action_init()
net: sched: fix action overwrite reference counting
Revert "net: sched: bump refcount for new action in ACT replace mode"
ice: fix memory leak of aRFS after resuming from suspend
i40e: Fix sparse warning: missing error code 'err'
i40e: Fix sparse error: 'vsi->netdev' could be null
i40e: Fix sparse error: uninitialized symbol 'ring'
i40e: Fix sparse errors in i40e_txrx.c
i40e: Fix parameters in aq_get_phy_register()
nl80211: fix beacon head validation
bpf, x86: Validate computation of branch displacements for x86-32
bpf, x86: Validate computation of branch displacements for x86-64
...
|
|
|
Kees Cook
|
68ef8735d2 |
lkdtm: Add REPORT_STACK for checking stack offsets
For validating the stack offset behavior, report the offset from a given process's first seen stack address. Add s script to calculate the results to the LKDTM kselftests. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210401232347.2791257-7-keescook@chromium.org |
|
|
Fenghua Yu
|
e75074781f |
selftests/resctrl: Change a few printed messages
Change a few printed messages to report test progress more clearly. Add a missing "\n" at the end of one printed message. Suggested-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Sean Christopherson
|
8ca52cc38d |
x86/sgx: Expose SGX architectural definitions to the kernel
Expose SGX architectural structures, as KVM will use many of the architectural constants and structs to virtualize SGX. Name the new header file as asm/sgx.h, rather than asm/sgx_arch.h, to have single header to provide SGX facilities to share with other kernel componments. Also update MAINTAINERS to include asm/sgx.h. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Co-developed-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Link: https://lkml.kernel.org/r/6bf47acd91ab4d709e66ad1692c7803e4c9063a0.1616136308.git.kai.huang@intel.com |
|
|
Greg Kroah-Hartman
|
b20e829390 |
Merge 5.12-rc6 into driver-core-next
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Daniel Latypov
|
9854781dba |
kunit: tool: make --kunitconfig accept dirs, add lib/kunit fragment
TL;DR $ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit Per suggestion from Ted [1], we can reduce the amount of typing by assuming a convention that these files are named '.kunitconfig'. In the case of [1], we now have $ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4 Also add in such a fragment for kunit itself so we can give that as an example more close to home (and thus less likely to be accidentally broken). [1] https://lore.kernel.org/linux-ext4/YCNF4yP1dB97zzwD@mit.edu/ Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
4808bf209e |
selftests/resctrl: Create .gitignore to include resctrl_tests
Create .gitignore to hold the test file resctrl_tests generated after compiling. Suggested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
1205b688c9 |
selftests/resctrl: Fix checking for < 0 for unsigned values
Dan reported following static checker warnings tools/testing/selftests/resctrl/resctrl_val.c:545 measure_vals() warn: 'bw_imc' unsigned <= 0 tools/testing/selftests/resctrl/resctrl_val.c:549 measure_vals() warn: 'bw_resc_end' unsigned <= 0 These warnings are reported because 1. measure_vals() declares 'bw_imc' and 'bw_resc_end' as unsigned long variables 2. Return value of get_mem_bw_imc() and get_mem_bw_resctrl() are assigned to 'bw_imc' and 'bw_resc_end' respectively 3. The returned values are checked for <= 0 to see if the calls failed Checking for < 0 for an unsigned value doesn't make any sense. Fix this issue by changing the implementation of get_mem_bw_imc() and get_mem_bw_resctrl() such that they now accept reference to a variable and set the variable appropriately upon success and return 0, else return < 0 on error. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
d81343b5ee |
selftests/resctrl: Fix incorrect parsing of iMC counters
iMC (Integrated Memory Controller) counters are usually at "/sys/bus/event_source/devices/" and are named as "uncore_imc_<n>". num_of_imcs() function tries to count number of such iMC counters so that it could appropriately initialize required number of perf_attr structures that could be used to read these iMC counters. num_of_imcs() function assumes that all the directories under this path that start with "uncore_imc" are iMC counters. But, on some systems there could be directories named as "uncore_imc_free_running" which aren't iMC counters. Trying to read from such directories will result in "not found file" errors and MBM/MBA tests will fail. Hence, fix the logic in num_of_imcs() such that it looks at the first character after "uncore_imc_" to check if it's a numerical digit or not. If it's a digit then the directory represents an iMC counter, else, skip the directory. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
4e5cb354c8 |
selftests/resctrl: Fix unmount resctrl FS
umount_resctrlfs() directly attempts to unmount resctrl file system without checking if resctrl FS is already mounted or not. It returns 0 on success and on failure it prints an error message and returns an error status. Calling umount_resctrlfs() when resctrl FS isn't mounted will return an error status. There could be situations where-in the caller might not know if resctrl FS is already mounted or not and the caller might still want to unmount resctrl FS if it's already mounted (For example during teardown). To support above use cases, change umount_resctrlfs() such that it now first checks if resctrl FS is already mounted or not and unmounts resctrl FS only if it's already mounted. unmount resctrl FS upon exit. For example, running only mba test on a Broadwell (BDW) machine (MBA isn't supported on BDW CPU). This happens because validate_resctrl_feature_request() would mount resctrl FS to check if mba is enabled on the platform or not and finds that the H/W doesn't support mba and hence will return false to run_mba_test(). This in turn makes the main() function return without unmounting resctrl FS. Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
f1dd71982d |
selftests/resctrl: Skip the test if requested resctrl feature is not supported
There could be two reasons why a resctrl feature might not be enabled on the platform 1. H/W might not support the feature 2. Even if the H/W supports it, the user might have disabled the feature through kernel command line arguments Hence, any resctrl unit test (like cmt, cat, mbm and mba) before starting the test will first check if the feature is enabled on the platform or not. If the feature isn't enabled, then the test returns with an error status. For example, if MBA isn't supported on a platform and if the user tries to run MBA, the output will look like this ok mounting resctrl to "/sys/fs/resctrl" not ok MBA: schemata change But, not supporting a feature isn't a test failure. So, instead of treating it as an error, use the SKIP directive of the TAP protocol. With the change, the output will look as below ok MBA # SKIP Hardware does not support MBA or MBA is disabled Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
c9fb4e7cee |
selftests/resctrl: Modularize resctrl test suite main() function
Resctrl test suite main() function does the following things 1. Parses command line arguments passed by user 2. Some setup checks 3. Logic that calls into each unit test 4. Print result and clean up after running each unit test Introduce wrapper functions for steps 3 and 4 to modularize the main() function. Adding these wrapper functions makes it easier to add any logic to each individual test. Please note that this is a preparatory patch for the next one and no functional changes are intended. Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
09a6793462 |
selftests/resctrl: Don't hard code value of "no_of_bits" variable
Cache related tests (like CAT and CMT) depend on a variable called no_of_bits to run. no_of_bits defines the number of contiguous bits that should be set in the CBM mask and a user can pass a value for no_of_bits using -n command line argument. If a user hasn't passed any value, it defaults to 5 (randomly chosen value). Hard coding no_of_bits to 5 will make the cache tests fail to run on systems that support maximum cbm mask that is less than or equal to 5 bits. Hence, don't hard code no_of_bits value. If a user passes a value for "no_of_bits" using -n option, use it. Otherwise, no_of_bits is equal to half of the maximum number of bits in the cbm mask. Please note that CMT test is still hard coded to 5 bits. It will change in subsequent patches that change CMT test. Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
06bd03a57f |
selftests/resctrl: Fix MBA/MBM results reporting format
MBM unit test starts fill_buf (default built-in benchmark) in a new con_mon group (c1, m1) and records resctrl reported mbm values and iMC (Integrated Memory Controller) values every second. It does this for five seconds (randomly chosen value) in total. It then calculates average of resctrl_mbm values and imc_mbm values and if the difference is greater than 300 MB/sec (randomly chosen value), the test treats it as a failure. MBA unit test is similar to MBM but after every run it changes schemata. Checking for a difference of 300 MB/sec doesn't look very meaningful when the mbm values are changing over a wide range. For example, below are the values running MBA test on SKL with different allocations 1. With 10% as schemata both iMC and resctrl mbm_values are around 2000 MB/sec 2. With 100% as schemata both iMC and resctrl mbm_values are around 10000 MB/sec A 300 MB/sec difference between resctrl_mbm and imc_mbm values is acceptable at 100% schemata but it isn't acceptable at 10% schemata because that's a huge difference. So, fix this by checking for percentage difference instead of absolute difference i.e. check if the difference between resctrl_mbm value and imc_mbm value is within 5% (randomly chosen value) of imc_mbm value. If the difference is greater than 5% of imc_mbm value, treat it is a failure. Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
ee0415681e |
selftests/resctrl: Use resctrl/info for feature detection
Resctrl test suite before running any unit test (like cmt, cat, mbm and mba) should first check if the feature is enabled (by kernel and not just supported by H/W) on the platform or not. validate_resctrl_feature_request() is supposed to do that. This function intends to grep for relevant flags in /proc/cpuinfo but there are several issues here 1. validate_resctrl_feature_request() calls fgrep() to get flags from /proc/cpuinfo. But, fgrep() can only return a string with maximum of 255 characters and hence the complete cpu flags are never returned. 2. The substring search logic is also busted. If strstr() finds requested resctrl feature in the cpu flags, it returns pointer to the first occurrence. But, the logic negates the return value of strstr() and hence validate_resctrl_feature_request() returns false if the feature is present in the cpu flags and returns true if the feature is not present. 3. validate_resctrl_feature_request() checks if a resctrl feature is reported in /proc/cpuinfo flags or not. Having a cpu flag means that the H/W supports the feature, but it doesn't mean that the kernel enabled it. A user could selectively enable only a subset of resctrl features using kernel command line arguments. Hence, /proc/cpuinfo isn't a reliable source to check if a feature is enabled or not. The 3rd issue being the major one and fixing it requires changing the way validate_resctrl_feature_request() works. Since, /proc/cpuinfo isn't the right place to check if a resctrl feature is enabled or not, a more appropriate place is /sys/fs/resctrl/info directory. Change validate_resctrl_feature_request() such that, 1. For cat, check if /sys/fs/resctrl/info/L3 directory is present or not 2. For mba, check if /sys/fs/resctrl/info/MB directory is present or not 3. For cmt, check if /sys/fs/resctrl/info/L3_MON directory is present and check if /sys/fs/resctrl/info/L3_MON/mon_features has llc_occupancy 4. For mbm, check if /sys/fs/resctrl/info/L3_MON directory is present and check if /sys/fs/resctrl/info/L3_MON/mon_features has mbm_<total/local>_bytes Please note that only L3_CAT, L3_CMT, MBA and MBM are supported. CDP and L2 variants can be added later. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
a3611fbc6e |
selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported
check_resctrlfs_support() does the following 1. Checks if the platform supports resctrl file system or not by looking for resctrl in /proc/filesystems 2. Calls opendir() on default resctrl file system path (i.e. /sys/fs/resctrl) 3. Checks if resctrl file system is mounted or not by looking at /proc/mounts Steps 2 and 3 will fail if the platform does not support resctrl file system. So, there is no need to check for them if step 1 fails. Fix this by returning immediately if the platform does not support resctrl file system. Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
b67a7665a9 |
selftests/resctrl: Add config dependencies
Add the config file for test dependencies. Suggested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Reinette Chatre
|
f29838e6fa |
selftests/resctrl: Fix a printed message
Add a missing newline to the printed help text to improve readability. Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
03216ed7bb |
selftests/resctrl: Share show_cache_info() by CAT and CMT tests
show_cache_info() functions are defined separately in CAT and CMT tests. But the functions are same for the tests and unnecessary to be defined separately. Share the function by the tests. Suggested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
ca2f4214f9 |
selftests/resctrl: Call kselftest APIs to log test results
Call kselftest APIs instead of using printf() to log test results for cleaner code and better future extension. Suggested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
2f320911d9 |
selftests/resctrl: Rename CQM test as CMT test
CMT (Cache Monitoring Technology) [1] is a H/W feature that reports cache
occupancy of a process. resctrl selftest suite has a unit test to test CMT
for LLC but the test is named as CQM (Cache Quality Monitoring).
Furthermore, the unit test source file is named as cqm_test.c and several
functions, variables, comments, preprocessors and statements widely use
"cqm" as either suffix or prefix. This rampant misusage of CQM for CMT
might confuse someone who is newly looking at resctrl selftests because
this feature is named CMT in the Intel Software Developer's Manual.
Hence, rename all the occurrences (unit test source file name, functions,
variables, comments and preprocessors) of cqm with cmt.
[1] Please see Intel SDM, Volume 3, chapter 17 and section 18 for more
information on CMT: https://software.intel.com/content/www/us/en/develop/articles/intel-sdm.html
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
|
Fenghua Yu
|
d7af3d0d51 |
selftests/resctrl: Fix missing options "-n" and "-p"
resctrl test suite accepts command line arguments (like -b, -t, -n and -p) as documented in the help. But passing -n and -p throws an invalid option error. This happens because -n and -p are missing in the list of characters that getopt() recognizes as valid arguments. Hence, they are treated as invalid options. Fix this by adding them to the list of characters that getopt() recognizes as valid arguments. Please note that the main() function already has the logic to deal with the values passed as part of these arguments and hence no changes are needed there. Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Reinette Chatre
|
f5f16ae4fa |
selftests/resctrl: Ensure sibling CPU is not same as original CPU
The resctrl tests can accept a CPU on which the tests are run and use default of CPU #1 if it is not provided. In the CAT test a "sibling CPU" is determined that is from the same package where another thread will be run. The current algorithm with which a "sibling CPU" is determined does not take the provided/default CPU into account and when that CPU is the first CPU in a package then the "sibling CPU" will be selected to be the same CPU since it starts by picking the first CPU from core_siblings_list. Fix the "sibling CPU" selection by taking the provided/default CPU into account and ensuring a sibling that is a different CPU is selected. Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
2428673638 |
selftests/resctrl: Clean up resctrl features check
Checking resctrl features call strcmp() to compare feature strings (e.g. "mba", "cat" etc). The checkings are error prone and don't have good coding style. Define the constant strings in macros and call strncmp() to solve the potential issues. Suggested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
896016d2ad |
selftests/resctrl: Fix compilation issues for other global variables
Reinette reported following compilation issue on Fedora 32, gcc version 10.1.1 /usr/bin/ld: resctrl_tests.o:<src_dir>/resctrl.h:65: multiple definition of `bm_pid'; cache.o:<src_dir>/resctrl.h:65: first defined here Other variables are ppid, tests_run, llc_occup_path, is_amd. Compiler isn't happy because these variables are defined globally in two .c files but are not declared as extern. To fix issues for the global variables, declare them as extern. Chang Log: - Split this patch from v4's patch 1 (Shuah). Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
8236c51d85 |
selftests/resctrl: Fix compilation issues for global variables
Reinette reported following compilation issue on Fedora 32, gcc version 10.1.1 /usr/bin/ld: cqm_test.o:<src_dir>/cqm_test.c:22: multiple definition of `cache_size'; cat_test.o:<src_dir>/cat_test.c:23: first defined here The same issue is reported for long_mask, cbm_mask, count_of_bits etc variables as well. Compiler isn't happy because these variables are defined globally in two .c files namely cqm_test.c and cat_test.c and the compiler during compilation finds that the variable is already defined (multiple definition error). Taking a closer look at the usage of these variables reveals that these variables are used only locally in functions such as cqm_resctrl_val() (defined in cqm_test.c) and cat_perf_miss_val() (defined in cat_test.c). These variables are not shared between those functions. So, there is no need for these variables to be global. Hence, fix this issue by making them static variables. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
Fenghua Yu
|
a9d26a302d |
selftests/resctrl: Enable gcc checks to detect buffer overflows
David reported a buffer overflow error in the check_results() function of the cmt unit test and he suggested enabling _FORTIFY_SOURCE gcc compiler option to automatically detect any such errors. Feature Test Macros man page describes_FORTIFY_SOURCE as below "Defining this macro causes some lightweight checks to be performed to detect some buffer overflow errors when employing various string and memory manipulation functions (for example, memcpy, memset, stpcpy, strcpy, strncpy, strcat, strncat, sprintf, snprintf, vsprintf, vsnprintf, gets, and wide character variants thereof). For some functions, argument consistency is checked; for example, a check is made that open has been supplied with a mode argument when the specified flags include O_CREAT. Not all problems are detected, just some common cases. If _FORTIFY_SOURCE is set to 1, with compiler optimization level 1 (gcc -O1) and above, checks that shouldn't change the behavior of conforming programs are performed. With _FORTIFY_SOURCE set to 2, some more checking is added, but some conforming programs might fail. Some of the checks can be performed at compile time (via macros logic implemented in header files), and result in compiler warnings; other checks take place at run time, and result in a run-time error if the check fails. Use of this macro requires compiler support, available with gcc since version 4.0." Fix the buffer overflow error in the check_results() function of the cmt unit test and enable _FORTIFY_SOURCE gcc check to catch any future buffer overflow errors. Reported-by: David Binderman <dcb314@hotmail.com> Suggested-by: David Binderman <dcb314@hotmail.com> Tested-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
|
|
David S. Miller
|
29684d802e |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says: ==================== pull-request: bpf 2021-04-01 The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 8 day(s) which contain a total of 10 files changed, 151 insertions(+), 26 deletions(-). The main changes are: 1) xsk creation fixes, from Ciara. 2) bpf_get_task_stack fix, from Dave. 3) trampoline in modules fix, from Jiri. 4) bpf_obj_get fix for links and progs, from Lorenz. 5) struct_ops progs must be gpl compatible fix, from Toke. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Linus Torvalds
|
6905b1dc3c |
x86:
* Fixes for missing TLB flushes with TDP MMU
* Fixes for race conditions in nested SVM
* Fixes for lockdep splat with Xen emulation
* Fix for kvmclock underflow
* Fix srcdir != builddir builds
* Other small cleanups
ARM:
* Fix GICv3 MMIO compatibility probing
* Prevent guests from using the ARMv8.4 self-hosted tracing extension
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmBlum4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM5sgf9HmO3FOAhMZg6byK8lVBd5M+voNnx
0oC2EWhcT4uuEJ6MZN8CYGorHBtiMFGya5+USCINM9Te2u92jgBhqVaOsc3SRVfE
GPDbwcaSM2LP8T1Ao2ilaMSbcBEbphBrLbiBw2bToIuqDnFXUwL6psdBHyKKYRv+
LbtjfrapdB8lyll9BOhF4Iq0l74jcJEAkD/y7FlMCEgDLFCVpfbkA1HcdV/1oXsJ
+d6WKlAH9643V8HrMoX7jiXamnJVafkX2Q75Lay6xkkHtdB5wnbRFzfJGXELv9qi
6eJ7Oh5oNmrSUIrtdFkeGMdZZoJJgE9GwCXpeXM49VeqTUKkUEx9v9GAsg==
=5B67
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"It's a bit larger than I (and probably you) would like by the time we
get to -rc6, but perhaps not entirely unexpected since the changes in
the last merge window were larger than usual.
x86:
- Fixes for missing TLB flushes with TDP MMU
- Fixes for race conditions in nested SVM
- Fixes for lockdep splat with Xen emulation
- Fix for kvmclock underflow
- Fix srcdir != builddir builds
- Other small cleanups
ARM:
- Fix GICv3 MMIO compatibility probing
- Prevent guests from using the ARMv8.4 self-hosted tracing
extension"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Check that TSC page value is small after KVM_SET_CLOCK(0)
KVM: x86: Prevent 'hv_clock->system_time' from going negative in kvm_guest_time_update()
KVM: x86: disable interrupts while pvclock_gtod_sync_lock is taken
KVM: x86: reduce pvclock_gtod_sync_lock critical sections
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
KVM: SVM: load control fields from VMCB12 before checking them
KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
KVM: make: Fix out-of-source module builds
selftests: kvm: make hardware_disable_test less verbose
KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
KVM: x86: remove unused declaration of kvm_write_tsc()
KVM: clean up the unused argument
tools/kvm_stat: Add restart delay
KVM: arm64: Fix CPU interface MMIO compatibility detection
KVM: arm64: Disable guest access to trace filter controls
KVM: arm64: Hide system instruction access to Trace registers
|
|
|
Matthew Wilcox (Oracle)
|
2c7e57a027 |
idr test suite: Improve reporting from idr_find_test_1
Instead of just reporting an assertion failure, report enough information that we can start diagnosing exactly went wrong. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
|
|
Matthew Wilcox (Oracle)
|
094ffbd1d8 |
idr test suite: Create anchor before launching throbber
The throbber could race with creation of the anchor entry and cause the IDR to have zero entries in it, which would cause the test to fail. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
|
|
Matthew Wilcox (Oracle)
|
703586410d |
idr test suite: Take RCU read lock in idr_find_test_1
When run on a single CPU, this test would frequently access already-freed memory. Due to timing, this bug never showed up on multi-CPU tests. Reported-by: Chris von Recklinghausen <crecklin@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |
|
|
Matthew Wilcox (Oracle)
|
1bb4bd266c |
radix tree test suite: Register the main thread with the RCU library
Several test runners register individual worker threads with the RCU library, but neglect to register the main thread, which can lead to objects being freed while the main thread is in what appears to be an RCU critical section. Reported-by: Chris von Recklinghausen <crecklin@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> |