Commit Graph

6269 Commits

Author SHA1 Message Date
Greg Kroah-Hartman c88b94a9f4 Merge 4.18-rc7 into staging-next
We want the staging changes in here for testing and merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-30 10:13:15 +02:00
Geert Uytterhoeven dae0c332b6 Input: hilkbd - Add casts to HP9000/300 I/O accessors
Internally, hilkbd uses "unsigned long" I/O addresses everywhere.
This works fine as:
  - On PA-RISC, hilkbd uses the gsc_{read,write}b() I/O accessors, which
    take "unsigned long" addresses,
  - On m68k, hilkbd uses {read,write}b(), which are currently mapped to
    {in,out}_8(), and convert the passed addresses to pointers
    internally.

However, the asm-generic version of {read,write}b() does not perform
such conversions, and requires passing pointers instead.  Hence add
casts to prepare for switching m68k to the asm-generic version.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-29 10:48:18 +02:00
Tim Schumacher 0b64fa0a0e Input: iforce - reorganize joystick configuration lists
* btn_avb_pegasus and btn_avb_tw are the same. Unify them
  into btn_joystick_avb.

* btn_wheel is an exact copy of btn_joystick, so remove it.
  Rename btn_avb_wheel into btn_wheel since it is the only
  sane configuration for a wheel.

* Assign the (new) btn_wheel configuration to the "AVB Top
  Shot Force Feedback Racing Wheel", because the previous
  configuration was meant for a joystick.

Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 15:24:35 -07:00
Nick Dyer 19a7121e5e Input: atmel_mxt_ts - move completion to after config crc is updated
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:34 -07:00
Nick Dyer 2ca3ba0ae4 Input: atmel_mxt_ts - don't report zero pressure from T9
If T9.CTRL DISAMP is set, then pressure is reported as zero. This means
some app layers (eg tslib) will ignore the contact.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:33 -07:00
Nick Dyer a4891f1058 Input: atmel_mxt_ts - zero terminate config firmware file
We use sscanf to parse the configuration file, so it's necessary to zero
terminate the configuration otherwise a truncated file can cause the
parser to run off into uninitialised memory.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:32 -07:00
Nick Dyer f865df7364 Input: atmel_mxt_ts - refactor config update code to add context struct
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:32 -07:00
Nick Dyer 15082bdbd9 Input: atmel_mxt_ts - config CRC may start at T71
On devices with the T71 object, the config CRC will start there, rather
than at T7.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:31 -07:00
Nick Dyer 01cc75f93e Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:30 -07:00
Nick Dyer e9326857f4 Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:30 -07:00
Nick Dyer 204b4eae0c Input: atmel_mxt_ts - use BIT() macro everywhere
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:29 -07:00
Nick Dyer 36f5d9ef26 Input: atmel_mxt_ts - only use first T9 instance
The driver only registers one input device, which uses the screen
parameters from the first T9 instance. The first T63 instance also uses
those parameters.

It is incorrect to send input reports from the second instances of these
objects if they are enabled: the input scaling will be wrong and the
positions will be mashed together.

This also causes problems on Android if the number of slots exceeds 32.

In the future, this could be handled by looking for enabled touch object
instances and creating an input device for each one.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:28 -07:00
Jia-Ju Bai 53fddb6618 Input: aiptek - replace GFP_ATOMIC with GFP_KERNEL in aiptek_probe()
aiptek_probe() is never called in atomic context. It calls
usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC
can be replaced with GFP_KERNEL.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:10 -07:00
Jia-Ju Bai 7a082a24cf Input: appletouch - replace GFP_ATOMIC with GFP_KERNEL
atp_open(), atp_recover() and atp_resume() are never called in atomic
context. They call usb_submit_urb() with GFP_ATOMIC, which is not
necessary. GFP_ATOMIC can be replaced with GFP_KERNEL.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:09 -07:00
Jia-Ju Bai 434ca100cf Input: yealink - replace GFP_ATOMIC with GFP_KERNEL in usb_probe()
usb_probe() is never called in atomic context.  It calls
usb_alloc_coherent() with GFP_ATOMIC, which is not necessary.  GFP_ATOMIC
can be replaced with GFP_KERNEL.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:09 -07:00
Jia-Ju Bai 1f25d9c60c Input: powermate - replace GFP_ATOMIC with GFP_KERNEL in powermate_alloc_buffers()
powermate_alloc_buffers() is never called in atomic context. It calls
usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC
can be replaced with GFP_KERNEL.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:07 -07:00
Jia-Ju Bai 673831da64 Input: keyspan_remote - replace GFP_ATOMIC with GFP_KERNEL in keyspan_probe()
keyspan_probe() is never called in atomic context. It calls
usb_alloc_coherent() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC
can be replaced with GFP_KERNEL.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:06 -07:00
Jia-Ju Bai e58650b57e Input: wdt87xx_i2c - replace mdelay() with msleep() in wdt87xx_resume()
wdt87xx_resume() is never called in atomic context.  It calls mdelay() to
busily wait, which is not necessary.  mdelay() can be replaced with
msleep().

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:05 -07:00
Tim Schumacher 6c6212aa22 Input: iforce - assign BTN_DEAD only for specific devices
Move BTN_DEAD into the arrays with the specific button sets
instead of assigning it for every iforce device.

BTN_DEAD represents an optical sensor which detects if the
user is interacting with the device. On devices without that
optical sensor BTN_DEAD is repeatedly causing false inputs
on every status update of the joystick.

Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-27 11:59:04 -07:00
Linus Torvalds 49b1622bdb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:

 - a couple of new device IDs added to Elan i2c touchpad controller
   driver

 - another entry in i8042 reset quirk list

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Lenovo LaVie Z to the i8042 reset list
  Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST
  MAINTAINERS: Add file patterns for serio device tree bindings
  Input: elan_i2c - add ACPI ID for lenovo ideapad 330
2018-07-27 09:53:45 -07:00
Tim Schumacher 305180bc05 Input: iforce - reformat the packet dump output
Previously, packets that have been dumped are shown in the
kernel log like this:

drivers/input/joystick/iforce/iforce-packets.c: info cmd = ff04, data =
56
02
04
00

Use dev_dbg to dump the packages only when requested and to list
the parent device as well. Use printf logic to generate the hexdump
instead of looping through every char that needs to be printed (which
in turn fixes the unnecessary newlines and looks more clean in general).

The resulting package dump output does now look like this:

usb 2-8: iforce_dump_packet info cmd = ff04, data = 56 02 04 00

Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-26 17:04:46 -07:00
Dmitry Torokhov 179909ecaf Input: stop telling users to snail-mail Vojtech
I do not think Vojtech wants snail mail these days (and he mentioned that
nobody has ever sent him snail mail), and the address is not even valid
anymore, so let's remove snail-mail instructions from the sources.

Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-26 17:04:37 -07:00
Dmitry Torokhov 76336b41bd Input: pxrc - flatten probe code
Instead of splitting probe code into separate USB and input setup, flatten it.
This allows for easier inspection of order of set up steps, since the probe code
is reasonably small.

Move input-related initialization (phys) from USB block to input block.

Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25 19:04:19 +00:00
Dmitry Torokhov c8783d3930 Input: pxrc - do not store unneeded data in driver structure
There is no need to store data buffer size, pointer to the buffer, or endpoint
address in pxrc structure, as they are either only needed during setup, or are
available from elsewhere.

Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25 19:04:18 +00:00
Dmitry Torokhov ce55f75f03 Input: pxrc - move module device table closer to where it is used
There is no need to have the device table first in the file.

Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25 19:04:16 +00:00
Dmitry Torokhov 34dad2cf11 Input: pxrc - fix freeing URB on device teardown
URB is the only resource that is not managed, and thus is destroyed too early,
before we unregister input device and stop URB in pxrc_close(). To fix it let's
install custom devm handler to free the URB at the right time in devm unwind
sequence.

Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Tested-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25 19:04:15 +00:00
Marcus Folkesson 9730f60888 Input: pxrc - do not store USB device in private struct
The USB device is only needed during setup, so put it back after
initialization and do not store it in our private struct.

Also, the USB device is a parent of USB interface so our driver
model rules ensure that USB device should not disappear while
interface device is still there; there is no need to take reference
to the USB device.

Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-25 19:04:13 +00:00
Chen-Yu Tsai 384cf4285b Input: i8042 - add Lenovo LaVie Z to the i8042 reset list
The Lenovo LaVie Z laptop requires i8042 to be reset in order to
consistently detect its Elantech touchpad. The nomux and kbdreset
quirks are not sufficient.

It's possible the other LaVie Z models from NEC require this as well.

Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-18 17:25:52 +00:00
Fabio Estevam a150c1fe38 Input: egalax_ts - switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-18 16:10:10 +00:00
KT Liao 6f88a6439d Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST
Add ELAN0622 to ACPI mapping table to support Elan touchpad found in
Ideapad 330-15AST.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Reported-by: Anant Shende <anantshende@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-16 12:14:48 +00:00
Greg Kroah-Hartman 83cf9cd6d5 Merge 4.18-rc5 into char-misc-next
We want the char-misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 09:04:54 +02:00
Olof Johansson 5306c6ad0e SoC updates for omap1 for v4.19 merge window
Mostly a series by Janusz Krzysztofik to clean up the
 GPIO and input handling for ams-delta. Because of the
 platform data changes, we decided that it's best to
 merge the related input changes also via the arm-soc
 tree so Dmitry Torokhov has acked the input changes.
 
 Also included is a change to constify gpio_leds from
 Arvind Yadav.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAltF9PcRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXN6Lg//ccr44ovAE3GWfS3JnnpbgxqcU5SJlleI
 vuy9vJ78okuq/bWXp87TgIpvR+Mikd7/dk1+W1JccefNsIfzG9QZY+ongUWORdhL
 KcwcTcNEL6sTFhhbSnyFWcL3mBrD/3TB8a8fm611tjYl87DYQ4PiD1Wnu+1EMsD7
 95FjzMQ6ASj2ulzoybSaTg33qpyoyUAzn78+qmSTV+2jz9lg8JBc+9kGI9x8lMnr
 3QWQYBJWSJCjkMTPNbltBY1jNdmfhyilqWbxXFr3FcifCRBCivbZblk+aPUsmLy6
 Pk5pdpQCnZd5hpsoAx2U+7o+/FKTq1UtGlDdfN4yQxiy1wT87uWkidfm1HxuLFTC
 rEBFfIOe3aXbJNbHgIV+l45CYnfNJb9ZyFqXmmunia1xqhZWq3MvDBIPK57NmNWV
 gGMDPq18eOBCBcnCrmDC5RwSssDyE1Qm4BuNeMSJr1qU01aB2pnHkJxG6s3OnmB2
 uOnCdLOpi4YNxnFrYhzCv7ZpAYOVDvdLMCSIjCgAVB3x/5B6YPlLFhMjj043gMgV
 6y+Mim/bmOklOA5i1MbVSZG7YCOk4ZvyRUacZ9juJwmW1eGMfvlJWOKr14K2pSer
 VEXCJ59CwrtlGzNMMUlPCZIHhGMgWwsJXZwG0tyIwyCNA2SaR/Z74t0xgE36YKVw
 vG+hw3FVrAk=
 =0NZG
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.19/omap1-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

SoC updates for omap1 for v4.19 merge window

Mostly a series by Janusz Krzysztofik to clean up the
GPIO and input handling for ams-delta. Because of the
platform data changes, we decided that it's best to
merge the related input changes also via the arm-soc
tree so Dmitry Torokhov has acked the input changes.

Also included is a change to constify gpio_leds from
Arvind Yadav.

* tag 'omap-for-v4.19/omap1-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: ams-delta: move late devices back to init_machine
  Input: ams_delta_serio: Get FIQ buffer from platform_data
  Input: ams_delta_serio: use IRQ resource
  ARM: OMAP1: Get rid of <mach/ams-delta-fiq.h>
  ARM: OMAP1: ams-delta FIQ: Keep serio input GPIOs requested
  ARM: OMAP1: ams-delta FIQ: don't use static GPIO numbers
  ARM: OMAP1: ams-delta: Hog "keybrd_dataout" GPIO pin
  Input: ams_delta_serio: Replace power GPIO with regulator
  Input: ams_delta_serio: use private structure
  Input: ams_delta_serio: convert to platform driver
  ARM: OMAP1: ams-delta: drop GPIO lookup table for serio device
  ARM: OMAP1: ams-delta: assign LED GPIO numbers from descriptors
  ARM: OMAP1: ams-delta: refactor late_init()
  ARM: OMAP1: constify gpio_led

Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-14 14:44:34 -07:00
Peter Rosin 193c2a07cf input: rohm_bu21023: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
Locking the root adapter for __i2c_transfer will deadlock if the
device sits behind a mux-locked I2C mux. Switch to the finer-grained
i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not
sit behind a mux-locked mux, the two locking variants are equivalent.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-13 00:08:14 +02:00
Sebastian Andrzej Siewior 381a2c6fb9 Input: iforce - use GFP_KERNEL in iforce_get_id_packet()
iforce_get_id_packet() invokes wait_event_interruptible_timeout() which
means it has to be in non-atomic context at that point, thus we can use
GFP_KERNEL instead of GFP_ATOMIC.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04 16:08:59 +00:00
Colin Ian King 4f0794c0ac Input: cros_ec_keyb - remove redundant variable num_cols
Variable num_cols is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable ‘num_cols’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04 16:08:12 +00:00
Daniel Mack fd8135b6f8 Input: eeti - fix link to documentation and email address in header
Keep the documentation link up-to-date in case anybody need to dive into it
again, and update email address while at it.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04 16:08:05 +00:00
Daniel Mack a114cbd00a Input: eeti - drop module parameters, parse DT properties
The only user of this driver in mainline does not make use of the module
parameters, so let's remove them. All properties for this driver should be
set through DT or pdata.

Use touchscreen_parse_properties() to automatically set some of the common
touchscreen properties and derive the axis inversion through that.

And finally, use touchscreen_report_pos() to handle the DT properties
automatically instead of doing the inversion ourselves.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04 16:08:01 +00:00
Daniel Mack e32d7f1b24 Input: eeti - add device tree matching table
Provide a match table so that the driver can be used in devicetree setups.
More properties are added in a later patch.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04 16:07:56 +00:00
Donald Shanty III 938f45008d Input: elan_i2c - add ACPI ID for lenovo ideapad 330
This allows Elan driver to bind to the touchpad found in Lenovo Ideapad 330
series laptops.

Signed-off-by: Donald Shanty III <dshanty@protonmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-04 15:58:47 +00:00
Enric Balletbo i Serra 413c94469a
Input: keyboard: Fix ChromeOS EC keyboard help message.
The cros-ec I2C and SPI transport drivers have been moved from MFD
subsystem to platform/chrome, at the same time, the config symbol
has been renamed and lost the MFD_ prefix So, update the help message
accordingly.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-07-03 12:40:44 -07:00
Arjan van de Ven af0a5646cb use the new async probing feature for the hyperv drivers
Recent kernels support asynchronous probing; most hyperv drivers
can be probed async easily so set the required flag for this.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03 13:02:28 +02:00
Janusz Krzysztofik 5f73861fae Input: ams_delta_serio: Get FIQ buffer from platform_data
Instead of exporting the FIQ buffer symbol to be used in
ams-delta-serio driver, pass it to the driver as platform_data.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 23:05:14 -07:00
Janusz Krzysztofik a617b36bbc Input: ams_delta_serio: use IRQ resource
The driver still obtains IRQ number from a hardcoded GPIO.  Use IRQ
resource instead.

For this to work on Amstrad Delta, add the IRQ resource to
ams-delta-serio platform device structure.  Obtain the IRQ number
assigned to "keybrd_clk" GPIO pin from FIQ initialization routine.

As a benefit, the driver no longer needs to include
<mach/board-ams-delta.h>.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 23:05:14 -07:00
Janusz Krzysztofik dc8fbeb0ff ARM: OMAP1: Get rid of <mach/ams-delta-fiq.h>
Split the header file into two parts and move them to directories where
they belong.

Information on internal structure of FIQ buffer is moved to
<linux/platform_data/ams-delta-fiq.h> for ams-delta-serio driver use.

Other information used by ams-delta board init file and FIQ code is
made local to mach-omap1 root directory.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 23:05:14 -07:00
Janusz Krzysztofik a32d5ce1db ARM: OMAP1: ams-delta FIQ: Keep serio input GPIOs requested
From the very beginning, input GPIO pins of ams-delta serio port have
been used by FIQ handler, not serio driver.

Don't request those pins from the ams-delta-serio driver any longer,
instead keep them requested and initialized by the FIQ initialization
routine which already requests them and releases while identifying GPIO
IRQs.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 23:05:14 -07:00
Janusz Krzysztofik 41f8fee385 ARM: OMAP1: ams-delta: Hog "keybrd_dataout" GPIO pin
"keybrd_dataout" GPIO pin used to be initialized by ams-delta-serio
driver to a state safe for ams-delta-serio device function and not
changed thereafter.  As such, it may be assumed not under the driver
control and responsibility for its initialization handed over to board
init file.

Introduce a GPIO hog table and take over control of the
"keybrd_dataout" GPIO pin from the ams-delta-serio driver.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 05:30:47 -07:00
Janusz Krzysztofik 2bcb1be092 Input: ams_delta_serio: Replace power GPIO with regulator
Modify the driver so it no longer requests and manipulates the
"keybrd_pwr" GPIO pin but a "vcc" regulator supply instead.

For this to work with Amstrad Delta, define a regulator over the
"keybrd_pwr" GPIO pin with the "vcc" supply for ams-delta-serio device
and register it from the board file.  Both assign an absulute GPIO
number to the soon depreciated .gpio member of the regulator config
structure, and also build and register a GPIO lookup table so it is
ready for use by the regulator driver as soon as its upcoming update
is applied.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 05:29:54 -07:00
Janusz Krzysztofik 56de7570b3 Input: ams_delta_serio: use private structure
Introduce a driver private structure and allocate it on device probe.
For now, use it instead of a static variable for storing a pointer to
serio structure.  Subsequent patches will populate it with more members
as needed.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 05:28:55 -07:00
Janusz Krzysztofik df88c57689 Input: ams_delta_serio: convert to platform driver
Convert the driver to an "ams-delta-serio" platform driver.  For it to
be used with Amstrad Delta, register an "ams-delta-serio" platform
device from the board init file.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02 05:28:27 -07:00
Greg Kroah-Hartman 7f5d8f7116 Merge 4.18-rc3 into staging-next
We want the staging/iio fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02 08:21:54 +02:00
Linus Torvalds c92067ae06 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - the main change is a fix for my brain-dead patch to PS/2 button
   reporting for some protocols that made it in 4.17

 - there is a new driver for Spreadtum vibrator that I intended to send
   during merge window but ended up not sending the 2nd pull request.
   Given that this is a brand new driver we should not see regressions
   here

 - a fixup to Elantech PS/2 driver to avoid decoding errors on Thinkpad
   P52

 - addition of few more ACPI IDs for Silead and Elan drivers

 - RMI4 is switched to using IRQ domain code instead of rolling its own
   implementation

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - fix button reporting for basic protocols
  Input: xpad - fix GPD Win 2 controller name
  Input: elan_i2c_smbus - fix more potential stack buffer overflows
  Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID
  Input: elantech - fix V4 report decoding for module with middle key
  Input: elantech - enable middle button of touchpads on ThinkPad P52
  Input: do not assign new tracking ID when changing tool type
  Input: make input_report_slot_state() return boolean
  Input: synaptics-rmi4 - fix axis-swap behavior
  Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts()
  Input: synaptics-rmi4 - convert irq distribution to irq_domain
  Input: silead - add MSSL0002 ACPI HID
  Input: goldfish_events - fix checkpatch warnings
  Input: add Spreadtrum vibrator driver
2018-06-27 09:16:53 -07:00
Dmitry Torokhov 03ae3a9caf Input: psmouse - fix button reporting for basic protocols
The commit ba667650c5 ("Input: psmouse - clean up code") was pretty
brain-dead and broke extra buttons reporting for variety of PS/2 mice:
Genius, Thinkmouse and Intellimouse Explorer. We need to actually inspect
the data coming from the device when reporting events.

Fixes: ba667650c5 ("Input: psmouse - clean up code")
Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-26 16:21:45 -07:00
Greg Kroah-Hartman f62252bf39 First set of IIO new device support, features and cleanups in the 4.19 cycle
The usual mixed bunch.  Particular good to see is the generic
 touch screen driver.  Will be interesting to see if this works
 for other ADCs without major changes.
 
 Core features
 * Channel types
   - New position relative channel type primarily for touch screen
     sensors to feed the generic touchscreen driver.
 
 New device support
 * ad5586
   - Add support for the AD5311R DAC.
 
 * Generic touch screen driver as an IIO consumer.
   - Note this is in input, but due to dependencies is coming through
     the IIO tree.
   - Specific support for this added to the at91-sama5d2 ADC.
   - Various necessary DT bindings added.
 
 Staging Drops
 * ADIS16060 gyro
   - A device with a very odd interface that was never cleanly supported.
     It's now very difficult to get, so unlikely it'll ever be fixed up.
 
 Cleanups and minor features and fixes
 * core
   - Fix y2038 timestamp issues now the core support is in place.
 * 104-quad-8
   - Provide some defines for magic numbers to help readability.
   - Fix an off by one error in register selection
 * ad7606
   - Put in a missing function parameter name in a prototype.
 * adis16023
   - Use generic sign_extend function rather than local version.
 * adis16240
   - Use generic sign_extend funciton rather than local version.
 * at91-sama5d2
   - Drop dependency on HAS_DMA now this is handled elsewhere.  Will
     improve build test coverage.
   - Add oversampling ratio control.  Note there is a minor ABI change
     here to increase the apparent depth to 14 bits so as to allow
     for transparent provision of different oversampling ratios that
     drop the actual bit depth to 13 or 12 bits.
 * hx711
   - Add a MAINTAINERS entry for this device.
 * inv_mpu6050
   - Replace the timestamp fifo 'special' code with generic timestamp
     handling.
   - Switch to using local store of timestamp divider rather than rate
     as that is more helpful for accurate time measurement.
   - Fix an unaligned access that didn't seem to be causing any trouble.
   - Use the fifo overflow bit to track the overflow status rather than
     a software counter.
   - New timestamping mechanism to deal with missed sample interrupts.
 * stm32-adc
   - Drop HAS_DMA build dependency.
 * sun4i-gpadc
   - Select REGMAP_IRQ a very rarely hit build issue fix.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlsxT24RHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogOHRAAllFPJBoq+nVqGAqe6CjSmWhAFdyv/Ey0
 4iDBsdBHrzhxnDuatqzbFhvu9TgqQxMBSbcRfqrGnJrnCFDNcvo1eJcxq13YFPCy
 EitRhu5kUdZ6Ez+OQOjX77wGlPyh8idZnaUkWjowOjnXztkHQjy6IWTbDKFk9bPY
 9fGBpmPDn1xaVPPWh7lZVAdTwCt2i+efG4sGyZyMQODjtM0q2G1MoHm9ioqgg8lN
 hzO7YIrZmLlXRUhapQ2/61uwa/2WMrcGK5v8eCGphEZnPN5lUWrT//w91+BCQpBC
 A9gRFpWblz5qHaRpNhzNbQjUrGvTAeIhF+bdOV2W+oI8CJhTJ0AlNqtUXs2pbaJn
 FO6jGwkC+jOA3XdE4tbiqenuMSZNggXBCgyRMfIK5WuIeBF02w57KHxgefkGTnQe
 Iqc9QDLLfkGDsOoh1l/+TMWjAxfXJLd7d04wYcRIDy6wumTi6GJxUesiQAnyq5eo
 Rg+o8gbfZcnbgzphBRoQjjftFMPeYdr48bCGCmjFjNnIPnemmUZg988gTggl6NST
 mzbFBsAnejmYpT393FPL0K9dLVUq5cRngQMuLVDjR4VnlQEVMyV0O+CsW83iSM36
 3nqpaUOapqsKJT74n62k1YtzJgxr1uoyMS0LGjldAPLDiTgMf9YiPCCihCpiCY89
 K9gE6lzS70A=
 =SvKj
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of IIO new device support, features and cleanups in the 4.19 cycle

The usual mixed bunch.  Particular good to see is the generic
touch screen driver.  Will be interesting to see if this works
for other ADCs without major changes.

Core features
* Channel types
  - New position relative channel type primarily for touch screen
    sensors to feed the generic touchscreen driver.

New device support
* ad5586
  - Add support for the AD5311R DAC.

* Generic touch screen driver as an IIO consumer.
  - Note this is in input, but due to dependencies is coming through
    the IIO tree.
  - Specific support for this added to the at91-sama5d2 ADC.
  - Various necessary DT bindings added.

Staging Drops
* ADIS16060 gyro
  - A device with a very odd interface that was never cleanly supported.
    It's now very difficult to get, so unlikely it'll ever be fixed up.

Cleanups and minor features and fixes
* core
  - Fix y2038 timestamp issues now the core support is in place.
* 104-quad-8
  - Provide some defines for magic numbers to help readability.
  - Fix an off by one error in register selection
* ad7606
  - Put in a missing function parameter name in a prototype.
* adis16023
  - Use generic sign_extend function rather than local version.
* adis16240
  - Use generic sign_extend funciton rather than local version.
* at91-sama5d2
  - Drop dependency on HAS_DMA now this is handled elsewhere.  Will
    improve build test coverage.
  - Add oversampling ratio control.  Note there is a minor ABI change
    here to increase the apparent depth to 14 bits so as to allow
    for transparent provision of different oversampling ratios that
    drop the actual bit depth to 13 or 12 bits.
* hx711
  - Add a MAINTAINERS entry for this device.
* inv_mpu6050
  - Replace the timestamp fifo 'special' code with generic timestamp
    handling.
  - Switch to using local store of timestamp divider rather than rate
    as that is more helpful for accurate time measurement.
  - Fix an unaligned access that didn't seem to be causing any trouble.
  - Use the fifo overflow bit to track the overflow status rather than
    a software counter.
  - New timestamping mechanism to deal with missed sample interrupts.
* stm32-adc
  - Drop HAS_DMA build dependency.
* sun4i-gpadc
  - Select REGMAP_IRQ a very rarely hit build issue fix.
2018-06-26 07:47:37 +08:00
Zhu Yi 3a658f23fb Input: add bu21029 touch driver
Add Rohm BU21029 resistive touch panel controller support with I2C
interface.

Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-24 15:20:12 -07:00
Fabio Estevam 5ae3769917 Input: imx6ul_tsc - switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:22:08 -07:00
Fabio Estevam e516359682 Input: fsl-imx25-tcq - switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:22:07 -07:00
Fabio Estevam a9faa462b6 Input: snvs_pwrkey - switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:22:06 -07:00
Fabio Estevam 0eb7090454 Input: imx_keypad - switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:22:06 -07:00
Enno Boland dd6bee81c9 Input: xpad - fix GPD Win 2 controller name
This fixes using the controller with SDL2.

SDL2 has a naive algorithm to apply the correct settings to a controller.
For X-Box compatible controllers it expects that the controller name
contains a variation of a 'XBOX'-string.

This patch changes the identifier to contain "X-Box" as substring.  Tested
with Steam and C-Dogs-SDL which both detect the controller properly after
adding this patch.

Fixes: c1ba08390a ("Input: xpad - add GPD Win 2 Controller USB IDs")
Cc: stable@vger.kernel.org
Signed-off-by: Enno Boland <gottox@voidlinux.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:21:18 -07:00
Ben Hutchings 50fc7b6195 Input: elan_i2c_smbus - fix more potential stack buffer overflows
Commit 40f7090bb1 ("Input: elan_i2c_smbus - fix corrupted stack")
fixed most of the functions using i2c_smbus_read_block_data() to
allocate a buffer with the maximum block size.  However three
functions were left unchanged:

* In elan_smbus_initialize(), increase the buffer size in the same
  way.
* In elan_smbus_calibrate_result(), the buffer is provided by the
  caller (calibrate_store()), so introduce a bounce buffer.  Also
  name the result buffer size.
* In elan_smbus_get_report(), the buffer is provided by the caller
  but happens to be the right length.  Add a compile-time assertion
  to ensure this remains the case.

Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:20:41 -07:00
Alexandr Savca 8938fc7b8f Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID
Add ELAN0618 to the list of supported touchpads; this ID is used in
Lenovo v330 15IKB devices.

Signed-off-by: Alexandr Savca <alexandr.savca@saltedge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:20:41 -07:00
??? e0ae2519ca Input: elantech - fix V4 report decoding for module with middle key
Some touchpad has middle key and it will be indicated in bit 2 of packet[0].
We need to fix V4 formation's byte mask to prevent error decoding.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:20:11 -07:00
Aaron Ma 24bb555e6e Input: elantech - enable middle button of touchpads on ThinkPad P52
PNPID is better way to identify the type of touchpads.
Enable middle button support on 2 types of touchpads on Lenovo P52.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-21 17:19:56 -07:00
Mauro Carvalho Chehab 5fb94e9ca3 docs: Fix some broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Mauro Carvalho Chehab ec15872daa docs: fix broken references with multiple hints
The script:
	./scripts/documentation-file-ref-check --fix

Gives multiple hints for broken references on some files.
Manually use the one that applies for some files.

Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15 18:10:01 -03:00
Dmitry Torokhov 5aff29efbe Merge branch 'ib/4.17-xen-kbdfront-runtime-config' into next
Bring in xen-kbdfront changes.
2018-06-12 16:38:35 -07:00
Ravi Chandra Sadineni 9bd0342253 Input: i8042 - increment wakeup_count for the respective port
Call pm_wakeup_event on every interrupt. This should help us in identifying
if keyboard was a potential wake reason for the last resume.

Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12 16:38:23 -07:00
Ravi Chandra Sadineni 925ffff2ea Input: cros_ec_keyb - remove check before calling pm_wakeup_event
Remove the unnecessary check before calling pm_wakeup_event. If the
device is not wake enabled, this call is no-op anyway.

Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12 16:38:22 -07:00
Enric Balletbo i Serra 27fff22168 Input: cros_ec_keyb - switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12 16:29:25 -07:00
Enric Balletbo i Serra e7a35f124a Input: cros_ec_keyb - make license text and MODULE_LICENSE match
The license text is specifying "GPLv2" but the MODULE_LICENSE is set to
GPL which means GNU Public License v2 or later. When MODULE_LICENSE and
boiler plate does not match, go for boiler plate license.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12 16:29:19 -07:00
Dmitry Torokhov 01f7e67a05 Merge branch 'next' into for-linus
Prepare second round of input updates for 4.18 merge window.
2018-06-12 16:24:36 -07:00
Kees Cook a86854d0c5 treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:

        devm_kzalloc(handle, a * b, gfp)

with:
        devm_kcalloc(handle, a * b, gfp)

as well as handling cases of:

        devm_kzalloc(handle, a * b * c, gfp)

with:

        devm_kzalloc(handle, array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        devm_kcalloc(handle, array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        devm_kzalloc(handle, 4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@

(
  devm_kzalloc(HANDLE,
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  devm_kzalloc(HANDLE,
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@

- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@

(
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
  devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * E2
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Kees Cook 6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Kees Cook 6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Oleksandr Andrushchenko 3ef8a2eeb6 Input: xen-kbdfront - allow better run-time configuration
It is now only possible to control if multi-touch virtual device
is created or not (via the corresponding XenStore entries),
but keyboard and pointer devices are always created.
In some cases this is not desirable. For example, if virtual
keyboard device is exposed to Android then the latter won't
automatically show on-screen keyboard as it expects that a
physical keyboard device can be used for typing.

Utilize keyboard and pointer device XenStore feature fields to
configure which virtual devices are created:
 - set "feature-disable-keyboard" to 1 if no keyboard device
   needs to be created
 - set "feature-disable-pointer" to 1 if no pointer device
   needs to be created
Keep old behavior by default.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Suggested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Tested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12 15:11:00 -07:00
Oleksandr Andrushchenko ce6f7d087e Input: xen-kbdfront - fix multi-touch XenStore node's locations
kbdif protocol describes multi-touch device parameters as a
part of frontend's XenBus configuration nodes while they
belong to backend's configuration. Fix this by reading the
parameters as defined by the protocol.

Fixes: 49aac8204d ("Input: xen-kbdfront - add multi-touch support")

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-12 15:10:59 -07:00
Dmitry Torokhov c258e84b18 Input: do not assign new tracking ID when changing tool type
We allow changing tool type (from MT_TOOL_FINGER to MT_TOOL_PALM) so we
should not be forcing new tracking ID for the slot.

Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11 10:23:39 -07:00
Dmitry Torokhov bf6247a70f Input: make input_report_slot_state() return boolean
Let's make input_report_slot_state() return boolean representing whether
the contact is active or not. This will allow writing code like:

	if (input_mt_report_slot_state(input, obj->mt_tool,
					obj->type != RMI_2D_OBJECT_NONE) {

		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x);
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y);
		...
	}

instead of:

	input_mt_report_slot_state(input, obj->mt_tool,
				   obj->type != RMI_2D_OBJECT_NONE);
	if (obj->type != RMI_2D_OBJECT_NONE) {
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x);
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y);
		...
	}

Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redaht.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11 10:21:06 -07:00
Lucas Stach 645a397d32 Input: synaptics-rmi4 - fix axis-swap behavior
The documentation for the touchscreen-swapped-x-y property states that
swapping is done after inverting if both are used. RMI4 did it the other
way around, leading to inconsistent behavior with regard to other
touchscreens.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11 10:20:16 -07:00
Wei Yongjun fd62929475 Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts()
The error return code PTR_ERR(data->irqdomain) is always 0 since
data->irqdomain is equal to NULL in this error handling case.

Fixes: 24d28e4f12 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-11 10:19:08 -07:00
Linus Torvalds 883cad5ba8 - New Device Support
- Add support for AXP813 ADC to AXP20x
    - Add support for PM8005, PM8998 and PMI8998
 
  - New Functionality
    - Add support for Battery Power Supply to AXP813
    - Add support for SYSCON to SPARD SC27XX SPI
    - Add support for RTC to ChromeOS Embedded-Controller
 
  - Fix-ups
    - Remove unused code; exynos{4,5}-pmu, cros_ec, cros_ec_acpi_gpe
    - Remove duplicate error messages (-ENOMEM, etc); htc-i2cpld, janz-cmodio,
 		max8997, rc5t583, sm501, smsc-ece1099, abx500-core, si476x-i2c,
 		ti_am335x_tscadc, tps65090, tps6586x, tps65910, tps80031,
 		twl6030-irq, viperboard
    - Succinctly use ptr to struct in sizeof(); rc5t583, abx500-core, sm501,
 		smsc-ece1099
    - Simplify syntax for NULL ptr checking; abx500-core, sm501
    - No not unnecessarily initialise variables; tps65910, tps65910
    - Reorganise and simplify driver data; omap-usb-tll
    - Move to SPDX license statement; tps68470
    - Probe ADCs via DT; axp20x
    - Use new GPIOD API; arizona-core
    - Constify things; axp20x
    - Reduce code-size (use MACROS, etc); axp20x, omap-usb-host
    - Add DT support/docs; motorola-cpcap
    - Remove VLAs; rave-sp
    - Use devm_* managed resources; cros_ec
    - Interrogate HW for firmware version; rave-sp
    - Provide ACPI support for ChromeOS Embedded-Controller
 
  - Bug Fixes
    - Reorder ordered (enum) device list; tps65218
    - Only accept valid data from the offset; rave-sp
    - Refrain from copying junk from failed SPI read; cros_ec_dev
    - Fix potential memory leaks; pcf50633-core
    - Fix clock initialisation; twl-core
    - Fix build-issue; tps65911
    - Fix off-by-one error; tps65911
    - Fix code ordering issues; intel-lpss
    - Fix COMPILE_TEST related issues; pwm-stm32
    - Fix broken MMC card detection; asic3
    - Fix clocking related issues; intel-lpss-pci
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlsea+sACgkQUa+KL4f8
 d2Fc+A//aaFlfHfJh337tvmJ6wC8w13jjXn0f2M2NrCvRS1CoMF/WqSmJbFGguET
 gwv4v8Yf5mWe9crJfSLR4b6hlNWfvzK9Rxwy1WJ8sfnN7a71SIS6LlapxQwZ0S5o
 3tQ8n2YKdIyy6feATKnxzRi6IvTjTsIe6BRYev2+m23cEqxoI7b6xo0H1CApVXez
 vEnPaT08421qZ2vuPx3UW3JgwWMTYe4iazq1BRkveZZBdyQC+GLpdpoJIO5/OziF
 Wgn01Hluu11YuAPidxtmLCAI23RcqLNcPB0zu6//CG5+ut71qnQRs6ua4R352nME
 G6aMRVCTR1b0XY48MK+IOLb7mPCCUByHdvdaonzBd48dIrX6k//kVzYxNKY1vlmk
 //l/cYhnHBZxGvJAvCmtyi+4AjGz0aLcabY6S7qHMvpNMQ7oNU9FDomJXxynjXg9
 ulDkA4EJy6jlWDS6h0u99xycyLuQ4wKo997/Sl5SU+9FBFrdOor2q7R4KfIXQsG9
 VGZXi2kWBO9V9oFbbo1oyZ52hDiCy2TKz6fk0rdRltOpVMd4PYluETc4nmnWDo5W
 hvjP3rIJSSSIcpggOoQMp5L03cONPGP4MdiuCXOREc6q476CFtpEgJMWApgaEUjw
 e1SE8HMKounqw0JYLVz3Lf0RbcHPuR1PN5HDbrchDb8LaAAyCcA=
 =NF/E
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for AXP813 ADC to AXP20x
   - Add support for PM8005, PM8998 and PMI8998

  New Functionality:
   - Add support for Battery Power Supply to AXP813
   - Add support for SYSCON to SPARD SC27XX SPI
   - Add support for RTC to ChromeOS Embedded-Controller

  Fix-ups:
   - Remove unused code; exynos{4,5}-pmu, cros_ec, cros_ec_acpi_gpe
   - Remove duplicate error messages (-ENOMEM, etc); htc-i2cpld,
        janz-cmodio, max8997, rc5t583, sm501, smsc-ece1099, abx500-core,
        si476x-i2c, ti_am335x_tscadc, tps65090, tps6586x, tps65910,
        tps80031, twl6030-irq, viperboard
   - Succinctly use ptr to struct in sizeof(); rc5t583, abx500-core,
        sm501, smsc-ece1099
   - Simplify syntax for NULL ptr checking; abx500-core, sm501
   - No not unnecessarily initialise variables; tps65910, tps65910
   - Reorganise and simplify driver data; omap-usb-tll
   - Move to SPDX license statement; tps68470
   - Probe ADCs via DT; axp20x
   - Use new GPIOD API; arizona-core
   - Constify things; axp20x
   - Reduce code-size (use MACROS, etc); axp20x, omap-usb-host
   - Add DT support/docs; motorola-cpcap
   - Remove VLAs; rave-sp
   - Use devm_* managed resources; cros_ec
   - Interrogate HW for firmware version; rave-sp
   - Provide ACPI support for ChromeOS Embedded-Controller

  Bug Fixes:
   - Reorder ordered (enum) device list; tps65218
   - Only accept valid data from the offset; rave-sp
   - Refrain from copying junk from failed SPI read; cros_ec_dev
   - Fix potential memory leaks; pcf50633-core
   - Fix clock initialisation; twl-core
   - Fix build-issue; tps65911
   - Fix off-by-one error; tps65911
   - Fix code ordering issues; intel-lpss
   - Fix COMPILE_TEST related issues; pwm-stm32
   - Fix broken MMC card detection; asic3
   - Fix clocking related issues; intel-lpss-pci"

* tag 'mfd-next-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
  mfd: cros_ec: Remove unused __remove function
  mfd: wm97xx-core: Platform data can be NULL
  mfd: cros_ec_dev: Don't advertise junk features on failure
  mfd: cros_ec: Use devm_kzalloc for private data
  mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock
  mfd: asic3: Fix broken MMC card detection
  mfd: timberdale: Fix spelling mistake "Uknown" -> "Unknown"
  mfd: omap-usb-host: Use match_string() helper
  mfd: stm32-timers: Fix pwm-stm32 linker issue with COMPILE_TEST
  pwm: stm32: Initialize raw local variables
  mfd: arizona: Update DT doc to support more standard Reset binding
  dt-bindings: mfd: Add bindings for DA9063L
  mfd: intel-lpss: Correct names of RESETS register bits
  mfd: qcom-spmi-pmic: Add support for pm8005, pm8998 and pmi8998
  mfd: intel-lpss: Program REMAP register in PIO mode
  mfd: cros_ec_i2c: Moving the system sleep pm ops to late
  mfd: cros_ec_i2c: Add ACPI module device table
  mfd: cros_ec_dev: Register shutdown function for debugfs
  mfd: cros_ec_dev: Register cros-ec-rtc driver as a subdevice
  mfd: cros_ec: Don't try to grab log when suspended
  ...
2018-06-11 07:20:17 -07:00
Eugen Hristev aa132ffb6b input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen
This adds a generic resistive touchscreen (GRTS) driver, which is based
on an IIO device (an ADC). It must be connected to the channels of an ADC
to receive touch data. Then it will feed the data into the input subsystem
where it registers an input device.
It uses an IIO callback buffer to register to the IIO device

Some parts of this patch are based on initial original work by
Mohamed Jamsheeth Hajanajubudeen and Bandaru Venkateswara Swamy

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-10 13:26:40 +01:00
Linus Torvalds 2857676045 - Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
 - Introduce overflow test module (Rasmus, Kees)
 - Introduce saturating size helper functions (Matthew, Kees)
 - Treewide use of struct_size() for allocators (Kees)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlsYJ1gWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJlCTEACwdEeriAd2VwxknnsstojGD/3g
 8TTFA19vSu4Gxa6WiDkjGoSmIlfhXTlZo1Nlmencv16ytSvIVDNLUIB3uDxUIv1J
 2+dyHML9JpXYHHR7zLXXnGFJL0wazqjbsD3NYQgXqmun7EVVYnOsAlBZ7h/Lwiej
 jzEJd8DaHT3TA586uD3uggiFvQU0yVyvkDCDONIytmQx+BdtGdg9TYCzkBJaXuDZ
 YIthyKDvxIw5nh/UaG3L+SKo73tUr371uAWgAfqoaGQQCWe+mxnWL4HkCKsjFzZL
 u9ouxxF/n6pij3E8n6rb0i2fCzlsTDdDF+aqV1rQ4I4hVXCFPpHUZgjDPvBWbj7A
 m6AfRHVNnOgI8HGKqBGOfViV+2kCHlYeQh3pPW33dWzy/4d/uq9NIHKxE63LH+S4
 bY3oO2ela8oxRyvEgXLjqmRYGW1LB/ZU7FS6Rkx2gRzo4k8Rv+8K/KzUHfFVRX61
 jEbiPLzko0xL9D53kcEn0c+BhofK5jgeSWxItdmfuKjLTW4jWhLRlU+bcUXb6kSS
 S3G6aF+L+foSUwoq63AS8QxCuabuhreJSB+BmcGUyjthCbK/0WjXYC6W/IJiRfBa
 3ZTxBC/2vP3uq/AGRNh5YZoxHL8mSxDfn62F+2cqlJTTKR/O+KyDb1cusyvk3H04
 KCDVLYPxwQQqK1Mqig==
 =/3L8
 -----END PGP SIGNATURE-----

Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull overflow updates from Kees Cook:
 "This adds the new overflow checking helpers and adds them to the
  2-factor argument allocators. And this adds the saturating size
  helpers and does a treewide replacement for the struct_size() usage.
  Additionally this adds the overflow testing modules to make sure
  everything works.

  I'm still working on the treewide replacements for allocators with
  "simple" multiplied arguments:

     *alloc(a * b, ...) -> *alloc_array(a, b, ...)

  and

     *zalloc(a * b, ...) -> *calloc(a, b, ...)

  as well as the more complex cases, but that's separable from this
  portion of the series. I expect to have the rest sent before -rc1
  closes; there are a lot of messy cases to clean up.

  Summary:

   - Introduce arithmetic overflow test helper functions (Rasmus)

   - Use overflow helpers in 2-factor allocators (Kees, Rasmus)

   - Introduce overflow test module (Rasmus, Kees)

   - Introduce saturating size helper functions (Matthew, Kees)

   - Treewide use of struct_size() for allocators (Kees)"

* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  treewide: Use struct_size() for devm_kmalloc() and friends
  treewide: Use struct_size() for vmalloc()-family
  treewide: Use struct_size() for kmalloc()-family
  device: Use overflow helpers for devm_kmalloc()
  mm: Use overflow helpers in kvmalloc()
  mm: Use overflow helpers in kmalloc_array*()
  test_overflow: Add memory allocation overflow tests
  overflow.h: Add allocation size calculation helpers
  test_overflow: Report test failures
  test_overflow: macrofy some more, do more tests for free
  lib: add runtime test of check_*_overflow functions
  compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06 17:27:14 -07:00
Kees Cook 0ed2dd03b9 treewide: Use struct_size() for devm_kmalloc() and friends
Replaces open-coded struct size calculations with struct_size() for
devm_*, f2fs_*, and sock_* allocations. Automatically generated (and
manually adjusted) from the following Coccinelle script:

// Direct reference to struct field.
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06 11:15:43 -07:00
Kees Cook acafe7e302 treewide: Use struct_size() for kmalloc()-family
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:

// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
//                      sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06 11:15:43 -07:00
Linus Torvalds 2158091d9c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - a new driver to ChipOne icn8505 based touchscreens

 - on certain systems with Elan touch controllers they will be switched
   away form PS/2 emulation and over to native SMbus mode

 - assorted driver fixups and improvements

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID
  Input: goodix - add new ACPI id for GPD Win 2 touch screen
  Input: xpad - add GPD Win 2 Controller USB IDs
  Input: ti_am335x_tsc - prevent system suspend when TSC is in use
  Input: ti_am335x_tsc - ack pending IRQs at probe and before suspend
  Input: cros_ec_keyb - mark cros_ec_keyb driver as wake enabled device.
  Input: mk712 - update documentation web link
  Input: atmel_mxt_ts - fix reset-gpio for level based irqs
  Input: atmel_mxt_ts - require device properties present when probing
  Input: psmouse-smbus - allow to control psmouse_deactivate
  Input: elantech - detect new ICs and setup Host Notify for them
  Input: elantech - add support for SMBus devices
  Input: elantech - query the resolution in query_info
  Input: elantech - split device info into a separate structure
  Input: elan_i2c - add trackstick report
  Input: usbtouchscreen - add sysfs attribute for 3M MTouch firmware rev
  Input: ati_remote2 - fix typo 'can by' to 'can be'
  Input: replace hard coded string with __func__ in pr_err()
  Input: add support for ChipOne icn8505 based touchscreens
  Input: gamecon - avoid using __set_bit() for capabilities
  ...
2018-06-05 16:05:14 -07:00
Nick Dyer 24d28e4f12 Input: synaptics-rmi4 - convert irq distribution to irq_domain
Convert the RMI driver to use the standard mechanism for
distributing IRQs to the various functions.

Tested on:
* S7300 (F11, F34, F54)
* S7817 (F12, F34, F54)

Signed-off-by: Nick Dyer <nick@shmanahar.org>
Acked-by: Christopher Heiny <cheiny@synaptics.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-05 10:33:35 -07:00
Hans de Goede fc573af632 Input: silead - add MSSL0002 ACPI HID
The Silead touchscreen on the Chuwi Vi8 tablet uses MSSL0002 as ACPI HID,
rather then the usual MSSL1680 id.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-05 10:29:38 -07:00
Johannes Wienke e6e7e9cd8e Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID
Add ELAN0612 to the list of supported touchpads; this ID is used in Lenovo
v330 14IKB devices.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199253
Signed-off-by: Johannes Wienke <languitar@semipol.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04 13:41:49 -07:00
Roman Kiryanov 8f6a652a8c Input: goldfish_events - fix checkpatch warnings
Address issues pointed by checkpatch.pl

Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04 13:36:26 -07:00
Xiaotong Lu 45615a9baf Input: add Spreadtrum vibrator driver
This patch adds the Spreadtrum vibrator driver, which embedded in the
Spreadtrum SC27xx series PMICs.

Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04 13:36:11 -07:00
Dmitry Torokhov c13aca79ff Merge branch 'next' into for-linus
Prepare input updates for 4.18 merge window.
2018-06-04 13:33:12 -07:00
Ethan Lee 5ca4d1ae9b Input: goodix - add new ACPI id for GPD Win 2 touch screen
GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp

Tested on a unit from the first production run sent to Indiegogo backers

Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04 13:31:48 -07:00
Ethan Lee c1ba08390a Input: xpad - add GPD Win 2 Controller USB IDs
GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp

Tested on a unit from the first production run sent to Indiegogo backers

Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-06-04 13:31:22 -07:00
Linus Torvalds cf626b0da7 Merge branch 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull procfs updates from Al Viro:
 "Christoph's proc_create_... cleanups series"

* 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits)
  xfs, proc: hide unused xfs procfs helpers
  isdn/gigaset: add back gigaset_procinfo assignment
  proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields
  tty: replace ->proc_fops with ->proc_show
  ide: replace ->proc_fops with ->proc_show
  ide: remove ide_driver_proc_write
  isdn: replace ->proc_fops with ->proc_show
  atm: switch to proc_create_seq_private
  atm: simplify procfs code
  bluetooth: switch to proc_create_seq_data
  netfilter/x_tables: switch to proc_create_seq_private
  netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data
  neigh: switch to proc_create_seq_data
  hostap: switch to proc_create_{seq,single}_data
  bonding: switch to proc_create_seq_data
  rtc/proc: switch to proc_create_single_data
  drbd: switch to proc_create_single
  resource: switch to proc_create_seq_data
  staging/rtl8192u: simplify procfs code
  jfs: simplify procfs code
  ...
2018-06-04 10:00:01 -07:00
Grygorii Strashko 22a844b853 Input: ti_am335x_tsc - prevent system suspend when TSC is in use
Prevent system suspend while user has finger on touch screen,
because TSC is wakeup source and suspending device while in use will
result in failure to disable the module.
This patch uses pm_stay_awake() and pm_relax() APIs to prevent and
resume system suspend as required.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-30 16:42:12 -07:00
Grygorii Strashko 46850420e5 Input: ti_am335x_tsc - ack pending IRQs at probe and before suspend
It is seen that just enabling the TSC module triggers a HW_PEN IRQ
without any interaction with touchscreen by user. This results in first
suspend/resume sequence to fail as system immediately wakes up from
suspend as soon as HW_PEN IRQ is enabled in suspend handler due to the
pending IRQ. Therefore clear all IRQs at probe and also in suspend
callback for sanity.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-30 16:42:12 -07:00
Ravi Chandra Sadineni 38ba34a43d Input: cros_ec_keyb - mark cros_ec_keyb driver as wake enabled device.
Mark cros_ec_keyb has wake enabled by default. If we see a MKBP event
related to keyboard,  call pm_wakeup_event() to make sure wakeup
triggers are accounted to keyb during suspend resume path.

Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-30 16:42:12 -07:00
Linus Torvalds 0044cdeb73 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "We are switching a bunch of Lenovo devices with Synaptics touchpads
  from PS/2 emulation over to native RMI/SMbus.

  Given that all commits are marked for stable there is no point
  delaying them till next release"

[ Also fix a too-small stack array for i2c communication in elan driver ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c_smbus - fix corrupted stack
  Input: synaptics - add Lenovo 80 series ids to SMBus
  Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
  Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
  Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI
2018-05-29 22:22:15 -05:00
Martin Kepplinger cbd606ec9f Input: mk712 - update documentation web link
At the mentioned address there's nothing found. By searching information
on the controller chip still can be found, so update the link to the
resulting page.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-29 16:34:22 -07:00
Sebastian Reichel ca1cd36cef Input: atmel_mxt_ts - fix reset-gpio for level based irqs
The current reset-gpio support triggers an interrupt storm on platforms
using the maxtouch with level based interrupt. The Motorola Droid 4,
which I used for some of the tests is not affected, since it uses a edge
based interrupt.

This change avoids the interrupt storm by enabling the device while its
interrupt is disabled. Afterwards we wait 100ms. This is important for
two reasons: The device is unresponsive for some time (~22ms for
mxt224E) and the CHG (interrupt) line is not working properly for 100ms.
We don't need to wait for any following interrupts, since the following
mxt_initialize() checks for bootloader mode anyways.

This fixes a boot issue on GE PPD (watchdog kills device due to
interrupt storm) and does not cause regression on Motorola Droid 4.

Fixes: f657b00df2 ("Input: atmel_mxt_ts - add support for reset line")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24 09:56:47 -07:00
Dmitry Torokhov 7cf432bf05 Input: atmel_mxt_ts - require device properties present when probing
The driver needs help determining whether it is dealing with a touchscreen
or a touchpad, and with button mapping. Previously we supported passing
this data via device properties, and also had DMI lists for Chromebooks
that specified Atmel devices in ACPI, but did not provide enough data
there. Now that chromeos_laptop driver is adjusted to supply necessary
device properties even for ACPI devices, we can drop the DMI tables and
refuse to probe if device properties are not attached to the device.

We use presence of "compatible" property to determine if device properties
are attached to the device or not and rely on chromeos_laptop to re-probe
the device after attaching missing device properties to it.

Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-24 09:31:39 -07:00
Dmitry Torokhov 754451342f Linux 4.17-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlsB91MeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGqLYH+gPrmb8gvH6CmckN
 5U+RKRjzvs6oDqXf5yFUJ7NqW1Ex8qMuAqv1Kx2LpuN8sDD42fPB0A5OxijNgk81
 omJIxqANbFPUQCt+epR1P5dp0XqbXCcIvmo9Dd2TM4EP0mcQqr+c61d7JXtVATMu
 JrR5X7pgepatgH7JYI7fm1yIh/6RIhYZXjU2HxwiRHIzsLfW/sTmM4HZksv8nJjl
 m+bT8XzEUCBhWCLT8z0TbbVug1N2qdyMzkMIS2JmDVJE4FZ9YOEnZzaCHGNZrkVV
 OYzr94Bv2Z2PO3KIrsEsNA/szhr9/8f5Si9mk9nOi2kTuvaF9hhjKxcCozVB+ses
 fm8wpmM=
 =FiAO
 -----END PGP SIGNATURE-----

Merge tag 'v4.17-rc6' into next

Sync up with mainline to bring in Atmel controller changes for Caroline.
2018-05-24 09:30:15 -07:00
Benjamin Tissoires bf232e460a Input: psmouse-smbus - allow to control psmouse_deactivate
This seems to be Synaptics specific, as some Elan touchpads are not
correctly switching to SMBus if we call deactivate before switching to
SMBus on cold boot and on resume.

Tested with the T480s

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 16:49:22 -07:00
Benjamin Tissoires df077237cf Input: elantech - detect new ICs and setup Host Notify for them
New ICs are using a different scheme for the alternate bus parameter.
Given that they are new and are only using either PS2 only or PS2 + SMBus
Host Notify, we force those new ICs to use the SMBus solution for enhanced
reporting.

This allows the touchpad found on the Lenovo T480s to report 5 fingers
every 8 ms, instead of having a limit of 2 every 8 ms.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 16:49:22 -07:00
Benjamin Tissoires 21c48dbde0 Input: elantech - add support for SMBus devices
Many of the Elantech devices are connected through PS/2 and a different
bus (SMBus or plain I2C).

To not break any existing device, we only enable SMBus based
on a module parameter. If some laptops require the quirk to
be set, we will have to rely on a list of PNPIds or MDI matching
to individually expose those hardware over SMBus.
the parameter mentioned above is elantech_smbus from the psmouse
module.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 16:49:22 -07:00
Benjamin Tissoires 80212ed743 Input: elantech - query the resolution in query_info
The command ETP_RESOLUTION_QUERY also contains the bus information.
It is better to fetch it once, while we are querying for device
information.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 16:49:22 -07:00
Benjamin Tissoires f078759201 Input: elantech - split device info into a separate structure
In preparation for SMBus device support, move static device
information that we query form the touchpad upon initialization into
separate structure. This will allow us to query the device without
allocating memory first.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 16:48:49 -07:00
Benjamin Tissoires 559b3df76f Input: elan_i2c - add trackstick report
The Elan touchpads over I2C/SMBus also can handle a trackstick.
Unfortunately, nothing tells us if the device supports trackstick (the
information lies in the PS/2 node), so rely on device properties to
determine whether to enable the trackstick node.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1313939

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 16:46:36 -07:00
Benjamin Tissoires 40f7090bb1 Input: elan_i2c_smbus - fix corrupted stack
New ICs (like the one on the Lenovo T480s) answer to
ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack
as i2c_smbus_read_block_data() uses the values returned by the i2c
device to know how many data it need to return.

i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX)
and there is no safeguard on how many bytes are provided in the return
value. Ensure we always have enough space for any future firmware.
Also 0-initialize the values to prevent any access to uninitialized memory.

Cc: <stable@vger.kernel.org> # v4.4.x, v4.9.x, v4.14.x, v4.15.x, v4.16.x
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 11:48:59 -07:00
Benjamin Tissoires ad8fb554f0 Input: synaptics - add Lenovo 80 series ids to SMBus
This time, Lenovo decided to go with different pieces in its latest
series of Thinkpads.

For those we have been able to test:
- the T480 is using Synaptics with an IBM trackpoint
   -> it behaves properly with or without intertouch, there is no point
      not using RMI4
- the X1 Carbon 6th gen is using Synaptics with an IBM trackpoint
   -> the touchpad doesn't behave properly under PS/2 so we have to
      switch it to RMI4 if we do not want to have disappointed users
- the X280 is using Synaptics with an ALPS trackpoint
   -> the recent fixes in the trackpoint handling fixed it so upstream
      now works fine with or without RMI4, and there is no point not
      using RMI4
- the T480s is using an Elan touchpad, so that's a different story

Cc: <stable@vger.kernel.org> # v4.14.x, v4.15.x, v4.16.x
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 11:47:04 -07:00
Aaron Ma 5717a09aea Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
Synaptics devices reported it has Intertouch support,
and it fails via PS/2 as following logs:

psmouse serio2: Failed to reset mouse on synaptics-pt/serio0
psmouse serio2: Failed to enable mouse on synaptics-pt/serio0

Set these new devices to use SMBus to fix this issue, then they report
SMBus version 3 is using, patch:
https://patchwork.kernel.org/patch/9989547/ enabled SMBus ver 3 and
makes synaptics devices work fine on SMBus mode.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 11:46:42 -07:00
Edvard Holst 15e2cffec3 Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
Lenovo use two different trackpoints in the fifth generation Thinkpad X1
Carbon. Both are accessible over SMBUS/RMI but the pnpIDs are missing.
This patch is for the Elantech trackpoint specifically which also
reports SMB version 3 so rmi_smbus needs to be updated in order to
handle it.

For the record, I was not the first one to come up with this patch as it
has been floating around the internet for a while now. However, I have
spent significant time with testing and my efforts to find the original
author of the patch have been unsuccessful.

Signed-off-by: Edvard Holst <edvard.holst@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 11:45:50 -07:00
Dmitry Torokhov 9b2071028f Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI
The touchpad on Lenovo Carbon X1 Gen 5 (2017 - Kabylake) is accessible over
SMBUS/RMI, so let's activate it by default.

Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-23 11:44:35 -07:00
Christoph Hellwig 3f3942aca6 proc: introduce proc_create_single{,_data}
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.

All trivial callers converted over.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16 07:23:35 +02:00
Nick Dyer 89f84b84d3 Input: usbtouchscreen - add sysfs attribute for 3M MTouch firmware rev
Allow querying of the firmware revision of the device

example:

4.10

Tested on ZII RDU2 platform and on Intel x86_64 PC.

Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-15 12:14:16 -07:00
Wolfram Sang ff7242ab02 Input: ati_remote2 - fix typo 'can by' to 'can be'
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-15 12:01:09 -07:00
Nick Simonov 67043f41dd Input: replace hard coded string with __func__ in pr_err()
Change hardcoded string "input_set_capability" in pr_err() function call,
replace it with "%s" __func__ instead.

Signed-off-by: Nick Simonov <nicksimonovv@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-15 12:00:53 -07:00
Hans de Goede e7330fa032 Input: add support for ChipOne icn8505 based touchscreens
The ChipOne icn8505 is an i2c capacitive touchscreen controller typically
used in cheap x86 tablets, this commit adds a driver for it.

Note the icn8505 is somewhat similar to the icn8318 and I started with
modifying that driver to support both, but in the end the differences were
too large and I decided to write a new driver instead.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-09 13:29:35 -07:00
Marcus Folkesson a5a45b7fcd Input: gamecon - avoid using __set_bit() for capabilities
input_set_capability() and input_set_abs_param() will do it for you.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08 15:39:04 -07:00
Marcus Folkesson 89223a2b03 Input: as5011 - avoid using __set_bit() for capabilities
input_set_capability() and input_set_abs_param() will do it for you.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08 15:36:02 -07:00
Marcus Folkesson a01308031c Input: xpad - avoid using __set_bit() for capabilities
input_set_capability() and input_set_abs_param() will do it for you.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08 15:35:47 -07:00
Leo Sperling 68c78d0155 Input: xpad - fix some coding style issues
Fix some coding style issues reported by checkpatch.pl. Mostly brackets
in macros, spacing and comment style.

Signed-off-by: Leo Sperling <leosperling97@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08 15:35:25 -07:00
Linus Torvalds ecd649b340 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "Just a few driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: atmel_mxt_ts - add missing compatible strings to OF device table
  Input: atmel_mxt_ts - fix the firmware update
  Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro
  MAINTAINERS: Rakesh Iyer can't be reached anymore
  Input: hideep_ts - fix a typo in Kconfig
  Input: alps - fix reporting pressure of v3 trackstick
  Input: leds - fix out of bound access
  Input: synaptics-rmi4 - fix an unchecked out of memory error path
2018-05-02 17:34:42 -10:00
Javier Martinez Canillas f6eeb9e548 Input: atmel_mxt_ts - add missing compatible strings to OF device table
Commit af503716ac ("i2c: core: report OF style module alias for devices
registered via OF") fixed how the I2C core reports the module alias when
devices are registered via OF.

But the atmel_mxt_ts driver only has an "atmel,maxtouch" compatible in its
OF device ID table, so if a Device Tree is using a different one, autoload
won't be working for the module (the matching works because the I2C device
ID table is used as a fallback).

So add compatible strings for each of the entries in the I2C device table.

Fixes: af503716ac ("i2c: core: report OF style module alias for devices registered via OF")
Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[dtor: document which compatibles are deprecated and should not be used]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-01 15:51:15 -07:00
Nick Dyer 068bdb67ef Input: atmel_mxt_ts - fix the firmware update
The automatic update mechanism will trigger an update if the
info block CRCs are different between maxtouch configuration
file (maxtouch.cfg) and chip.

The driver compared the CRCs without retrieving the chip CRC,
resulting always in a failure and firmware flashing action
triggered. Fix this issue by retrieving the chip info block
CRC before the check.

Note that this solution has the benefit that by reading the
information block and the object table into a contiguous region
of memory, we can verify the checksum at probe time. This means
we make sure that we are indeed talking to a chip that supports
object protocol correctly.

Using this patch on a kevin chromebook, the touchscreen and
touchpad drivers are able to match the CRC:

  atmel_mxt_ts 3-004b: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40
  atmel_mxt_ts 5-004a: Family: 164 Variant: 17 Firmware V2.0.AA Objects: 31
  atmel_mxt_ts 3-004b: Resetting device
  atmel_mxt_ts 5-004a: Resetting device
  atmel_mxt_ts 3-004b: Config CRC 0x573E89: OK
  atmel_mxt_ts 3-004b: Touchscreen size X4095Y2729
  input: Atmel maXTouch Touchscreen as /devices/platform/ff130000.i2c/i2c-3/3-004b/input/input5
  atmel_mxt_ts 5-004a: Config CRC 0x0AF6BA: OK
  atmel_mxt_ts 5-004a: Touchscreen size X1920Y1080
  input: Atmel maXTouch Touchpad as /devices/platform/ff140000.i2c/i2c-5/5-004a/input/input6

Signed-off-by: Nick Dyer <nick.dyer@shmanahar.org>
Acked-by: Benson Leung <bleung@chromium.org>
[Ezequiel: minor patch massage]
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-01 11:54:51 -07:00
Vittorio Gambaletta (VittGam) f372b81101 Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro
This patch adds the correct platform data information for the Caroline
Chromebook, so that the mouse button does not get stuck in pressed state
after the first click.

The Samus button keymap and platform data definition are the correct
ones for Caroline, so they have been reused here.

Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Salvatore Bellizzi <lkml@seppia.net>
Tested-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
[dtor: adjusted vendor spelling to match shipping firmware]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-01 11:35:33 -07:00
Thomas Gleixner a3ed0e4393 Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
Revert commits

92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")

As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.

As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:

* systemd kills daemons on resume, after >WatchdogSec seconds
  of suspending (Genki Sky).  [Verified that that's because systemd uses
  CLOCK_MONOTONIC and expects it to not include the suspend time.]

* systemd-journald misbehaves after resume:
  systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
  (Mike Galbraith).

* NetworkManager reports "networking disabled" and networking is broken
  after resume 50% of the time (Pavel).  [May be because of systemd.]

* MATE desktop dims the display and starts the screensaver right after
  system resume (Pavel).

* Full system hang during resume (me).  [May be due to systemd or NM or both.]

That happens on debian and open suse systems.

It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.

Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2018-04-26 14:53:32 +02:00
Masanari Iida 6f226cff7a Input: hideep_ts - fix a typo in Kconfig
This patch fixes a spelling error found in Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:38:16 -07:00
Pali Rohár 9c71b2c53b Input: alps - fix reporting pressure of v3 trackstick
According to documentation, all 7 lower bits represents trackpoint pressure.

Fixes: 4621c96604 ("Input: alps - report pressure of v3 and v7 trackstick")
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:38:16 -07:00
Pali Rohár d91abc21e1 Input: alps - demystify trackstick initialization for v3 and v6 protocols
Remove cite "Not sure what this does, but it is absolutely essential".

Extract initialization of trackstick part when touchpad is in passthrough
mode for v3 and v6 protocols into own function. Initialization for v3 is:
setscale11, setscale11, setscale11, nibble 0x9, nibble 0x4. Initialization
for v6 is: setscale11, setscale11, setscale11, setrate 0xC8, setrate 0x14.
Nibbles 0x9 and 0x4 for v3 protocol correspond to setrate 0xC8 and 0x14,
therefore these sequences are same.

When touchpad is in passthrough mode, then OS communicates with trackstick
and this sequence is some magic vendor PS/2 command to put trackstick into
"extended" mode. After that sequence trackstick starts reporting packets in
some vendor 4 bytes format (first byte is always 0xE8).

Next step after configuring trackstick to be in "extended" mode, is to
configure touchpad for v3 protocol to expect that trackstick reports data
in "extended" mode. For v3 protocol this is done by setting bit 1 in
register 0xC2C8 (offset 0x08 from base address 0xC2C0).

When both touchpad and trackstick are not configured for "extended" mode
then touchpad reports trackstick packets in different format, which is not
supported by psmouse/alps driver (yet).

In Cirque documentation GP-AN- 130823 INTERFACING TO GEN4 OVER I2C (PDF)
available at http://www.cirque.com/gen4-dev-resources is Logical Address
0xC2C8 named as PS2AuxControl and Bit Number 1 as ProcessAuxExtendedData
with description: Auxiliary device data is assumed to be extended data when
set.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-23 16:37:54 -07:00
Dmitry Torokhov 57eb13a9e8 Merge branch 'ib-chrome-platform-input-atmel-mx-ts-platform-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform into next
Sync up with chrome-platform to bring in changes to Atmel touch
controller.
2018-04-23 16:07:15 -07:00
Chen Zhong 3e9f0b3e2b input: Add MediaTek PMIC keys support
This patch add support to handle MediaTek PMIC MT6397/MT6323 key
interrupts including pwrkey and homekey, also add setting for
long press key shutdown behavior.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-16 15:16:11 +01:00
Linus Torvalds f6811370b9 Changes to chrome-platform for v4.17
Incorporates a series from Dmitry to remove platform data from
 chromeos_laptop.c, which was the only user of platform data
 for the atmel_mxt_ts driver.
 
 Includes a series to clean up sysfs and debugfs for cros_ec.
 
 Other misc. cleanups.
 
 Thanks,
 Benson
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlrP2NkACgkQHwn1ewov
 5lhd7RAAgueLytizaj9QlWgiq5mqN6OJ9z+QoipmCQlB2oqSAJZhWJ17BT91t+dW
 0V/xaV0qJ6k8ttcC2UiDAiyFrLk9T/7tYjcvqsNQPz4zMqRcKO73m92+hBcIWIFV
 X0DUyNvck1sE0lKgmvuKo+m8Rhtrf13gkYVeYp3RV21PiEaUmhn8hr88L83arnPu
 SHsk/PUS4cQo/Pwfgxc7Zh6jXDMByCw3oIBdmxbbNtZOnWBatmO2N20rn2yQC77d
 I/+n6zHgkTpZ2TpjtzYRxb9iW2NdgDwEDaJt/r57Nk+z0XEgYfvS8U+R/vYC4Lb8
 C6sIgAGP5gCv9wh9UJOC1+XlZRGeKHSLZkQRHqESV7K38aOLX7lQopwGR5USYimY
 KtUIknRJSZD/jiGyH8NW94u6RlxeoqLWP7GKERm8gGhOkTAqjvFfD5uBLZbEl9Ub
 Bk9HPIZ/Nq1mg0srGQjSuhgRFoub1MWriD6xthy9PfV0i72pxtRfIZuvhieCBvQ/
 Bi3HW05uMfXasuGOjsDJbCbTiKmISMtBC7B1XXE0ioUcZE2bnFyYBmL92E+Vck6q
 mxFmmdwHmbDrShaEmzWTnXRCA/06QABxWZK0S2IZWu/qy8+UP4OwxFFNvC+6vKNN
 utUBvmCYjt46CZ0q6JD9eeQ8E7lf0HMJh4DMManrB2fa7BAhLQQ=
 =mDkk
 -----END PGP SIGNATURE-----

Merge tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung:

 - a series from Dmitry to remove platform data from chromeos_laptop.c,
   which was the only user of platform data for the atmel_mxt_ts driver.

 - a series to clean up sysfs and debugfs for cros_ec

 - other misc cleanups

* tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: (22 commits)
  platform/chrome: mfd/cros_ec_dev: Add sysfs entry to set keyboard wake lid angle
  platform/chrome: cros_ec_debugfs: Add PD port info to debugfs
  platform/chrome: cros_ec_debugfs: Use octal permissions '0444'
  platform/chrome: cros_ec_sysfs: use permission-specific DEVICE_ATTR variants
  platform/chrome: cros_ec_sysfs: introduce to_cros_ec_dev define.
  platform/chrome: cros_ec_sysfs: Modify error handling
  platform/chrome: cros_ec_lpc: Add support for Google devices using custom coreboot firmware
  platform/chrome: cros_ec_lpc: wake up from s2idle on Chrome EC
  Input: atmel_mxt_ts - remove platform data support
  platform/chrome: chromeos_laptop - discard data for unneeded boards
  platform/chrome: chromeos_laptop - use device properties for Pixel
  platform/chrome: chromeos_laptop - rely on I2C to set up interrupt trigger
  platform/chrome: chromeos_laptop - use I2C notifier to create devices
  platform/chrome: chromeos_laptop - parse DMI IRQ data once
  platform/chrome: chromeos_laptop - rework i2c peripherals initialization
  platform/chrome: chromeos_laptop - factor out getting IRQ from DMI
  platform/chrome: chromeos_laptop - introduce pr_fmt()
  platform/chrome: chromeos_laptop - stop setting suspend mode for Atmel devices
  platform/chrome: chromeos_laptop - add SPDX identifier
  Input: atmel_mxt_ts - switch ChromeOS ACPI devices to generic props
  ...
2018-04-13 16:20:36 -07:00
Dmitry Torokhov 6bd6ae6396 Input: leds - fix out of bound access
UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with
led > LED_CHARGING:

[ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds]
[ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128

This happens because we were writing to the led structure before making
sure that it exists.

Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-11 14:52:59 -07:00
Dmitry Torokhov 96a938aa21 Input: atmel_mxt_ts - remove platform data support
Now that there are no users of custom Atmel platform data, and everyone
has switched to the generic device properties, we can remove support for
the platform data.

Acked-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-04-09 22:55:16 -07:00
Dmitry Torokhov d3f810ce08 Input: atmel_mxt_ts - switch ChromeOS ACPI devices to generic props
Move older ChromeOS devices describing Atmel controllers in ACPI, but not
providing enough details to configure the controllers properly, from
platform data over to generic device properties. This will allow us
remove support for platform data later on, leaving only generic device
properties in place.

Acked-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-04-09 22:39:42 -07:00
Dmitry Torokhov 93afb1d6e7 Input: atmel_mxt_ts - switch from OF to generic device properties
Instead of using OF-specific APIs to fecth device properties, let's switch
to generic device properties API. This will allow us to use device
properties on legacy ChromeOS devices and get rid of platform data down
the road.

Acked-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-04-09 22:39:33 -07:00
Dmitry Torokhov d80808e1eb Input: atmel_mxt_ts - do not pass suspend mode in platform data
The way we are supposed to put controller to sleep and wake it up does not
depend on the platform, but rather on controller itself, so we want to get
rid of suspend mode in platform data (and eventually get rid of platform
data completely). Unfortunately some early chromebooks (the original Pixel,
Acer C720) were shipped with config that requires manually re-enabling
touch reporting in T9. We will sort it out, but in the meantime let's
switch to a simple DMI quirk.

We'll keep pdata->suspend_mode for now and remove it when we rework
chromeos-laptop driver.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
2018-04-09 22:38:04 -07:00
Christophe JAILLET 839c422736 Input: synaptics-rmi4 - fix an unchecked out of memory error path
When extending the rmi_spi buffers, we must check that no out of memory
error occurs, otherwise we may access data above the currently allocated
memory.

Propagate the error code returned by 'rmi_spi_manage_pools()' instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-06 15:39:18 -07:00
Linus Torvalds 5414ab31b1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - new driver for PhoenixRC Flight Controller Adapter

 - new driver for RAVE SP Power button

 - fixes for autosuspend-related deadlocks in a few unput USB dirvers

 - support for 2nd wheel in ATech PS/2 mouse

 - fix for ALPS trackpoint detection on Thinkpad L570 and Latitude 7370

 - bunch of cleanups in various in PS/2 protocols

 - other assorted changes and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
  Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
  Input: stmfts, s6sy761 - update my e-mail
  Input: stmfts - use async probe & suspend/resume to avoid 2s delay
  Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
  Input: xpad - add PDP device id 0x02a4
  Input: alps - report pressure of v3 and v7 trackstick
  Input: pxrc - new driver for PhoenixRC Flight Controller Adapter
  Input: usbtouchscreen - do not rely on input_dev->users
  Input: usbtouchscreen - fix deadlock in autosuspend
  Input: pegasus_notetaker - do not rely on input_dev->users
  Input: pagasus_notetaker - fix deadlock in autosuspend
  Input: synaptics_usb - do not rely on input_dev->users
  Input: synaptics_usb - fix deadlock in autosuspend
  Input: gpio-keys - add support for wakeup event action
  Input: appletouch - use true and false for boolean values
  Input: silead - add Chuwi Hi8 support
  Input: analog - use get_cycles() on PPC
  Input: stmpe-keypad - remove VLA usage
  Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
  Input: add RAVE SP Powerbutton driver
  ...
2018-04-05 13:21:57 -07:00
Dmitry Torokhov 664b0bae0b Merge branch 'next' into for-linus
Prepare input updates for 4.17 merge window.
2018-04-04 16:11:49 -07:00
Ondrej Zary 04bb1719c4 Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g.
VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all
VAIO machines by the nomux blacklist, the data from touch sensor
buttons and touchpad are combined. The protocol used by the buttons is
probably similar to the touchpad protocol (both are Synaptics) so both
devices get enabled. The controller combines the data, creating a mess
which results in random button clicks, touchpad stopping working and
lost sync error messages:
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request

Add a new i8042_dmi_forcemux_table whitelist with VGN-CS.
With MUX enabled, touch sensor buttons are detected as separate device
(and left disabled as there's currently no driver), fixing all touchpad
problems.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-04-04 16:10:51 -07:00
Linus Torvalds 680014d6d1 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time(r) updates from Thomas Gleixner:
 "A small set of updates for timers and timekeeping:

   - The most interesting change is the consolidation of clock MONOTONIC
     and clock BOOTTIME.

     Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
     not longer ignore the time spent in suspend. A new clock
     MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
     kernels before this change. This allows applications to
     programmatically check for the clock MONOTONIC behaviour.

     As discussed in the review thread, this has the potential of
     breaking user space and we might have to revert this. Knock on wood
     that we can avoid that exercise.

   - Updates to the NTP mechanism to improve accuracy

   - A new kernel internal data structure to aid the ongoing Y2038 work.

   - Cleanups and simplifications of the clocksource code.

   - Make the alarmtimer code play nicely with debugobjects"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Init nanosleep alarm timer on stack
  y2038: Introduce struct __kernel_old_timeval
  tracing: Unify the "boot" and "mono" tracing clocks
  hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
  posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Remove boot time specific code
  Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
  timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
  timekeeping/ntp: Determine the multiplier directly from NTP tick length
  timekeeping/ntp: Don't align NTP frequency adjustments to ticks
  clocksource: Use ATTRIBUTE_GROUPS
  clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
  clocksource: Don't walk the clocksource list for empty override
2018-04-04 14:50:29 -07:00
Linus Torvalds ef1c4a6fa9 media updates for v4.17-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaw1yeAAoJEAhfPr2O5OEVDDgQAIYpin6obedJOm7zIm741Q0S
 fS2FL2pygyvHlVtU20ERHgvM6aD5tujekpDM4+GNgnq0aAabxvqBvdohmHQjyVSw
 FgszgY6kQSnI8S4Oy9RB8H/MFRq7Wz9Qf+KmJh0SfuUoMzBe2A40yLjYQ+sAMJr9
 mm0ijxxRpFYikVtIBgKDbjnx6wdkOs12M7YlJuI8N/tMBHMt+p2EfvqcX6GF725i
 sgLGcMsTJr1sUSyY8vnM2pAlKfZL2tZqigx5f9sB4UM7uHSw/oL/a/8I+t6Mju1X
 J1BD3L7UtTpwqO9sAR5BsJQ+0pAkXNOF+eLGs2p9rx4sO0DOLKoUptMI+YryvE86
 /SOlTskSSAeX/rBFyZJw1zv0/9mdGrHoyCy0q/lfDkD/mQkrUJDDZ7GPLqZ9rLUe
 2cXn1xMWB/soeR70oTyew0D2SZkp6y4DQr0Rwje7V8/SOWMmJvhaVIWhVIP9ZrS6
 AvCS7WUYTTVIX+td2glnLkJ5SaXXJyRYv8Utp/TUrYvCFOX7wsk7F0pRY4PE4PeZ
 BL7Bl8H9l3HGWWhdqPvw+ETdJgcbq/IwVUcpuuEPjkhDZEqHz//vzwoPt1nT4v6M
 gfqfaW5LaYuj0MYYqyxZMDwP3FWk4SsQ0NZzmaFs+yfE17bcWUMuf3ZVJtjmLxzk
 RUo0E/7RZsrw7LkCy0KF
 =bzhS
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - new CEC pin injection code for testing purposes

 - DVB frontend cxd2099 promoted from staging

 - new platform driver for Sony cxd2880 DVB devices

 - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x,
   tw9910.c

 - removal of unused cx18 and ivtv alsa mixers

 - the reneseas-ceu driver doesn't depend on soc_camera anymore and
   moved from staging

 - removed the mantis_vp3028 driver, unused since 2009

 - s5p-mfc: add support for version 10 of the MSP

 - added a decoder for imon protocol

 - atomisp: lots of cleanups

 - imx074 and mt9t031: don't depend on soc_camera anymore, being
   promoted from staging

 - added helper functions to better support DVB I2C binding

 - lots of driver improvements and cleanups

* tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits)
  media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd)
  media: fimc-capture: get rid of two warnings
  media: dvb-usb-v2: fix a missing dependency of I2C_MUX
  media: uvc: to the right check at uvc_ioctl_enum_framesizes()
  media: cec-core: fix a bug at cec_error_inj_write()
  media: tda9840: cleanup a warning
  media: tm6000:  avoid casting just to print pointer address
  media: em28xx-input: improve error handling code
  media: zr364xx: avoid casting just to print pointer address
  media: vivid-radio-rx: add a cast to avoid a warning
  media: saa7134-alsa: don't use casts to print a buffer address
  media: solo6x10: get rid of an address space warning
  media: zoran: don't cast pointers to print them
  media: ir-kbd-i2c: change the if logic to avoid a warning
  media: ir-kbd-i2c: improve error handling code
  media: saa7134-input: improve error handling
  media: s2255drv: fix a casting warning
  media: ivtvfb: Cleanup some warnings
  media: videobuf-dma-sg: Fix a weird cast
  soc_camera: fix a weird cast on printk
  ...
2018-04-03 17:16:59 -07:00
Linus Torvalds 0734e00ef9 Merge branch 'parisc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
 "Lots of small enhancements and fixes in this patchset:

   - improved the x86-64 compatibility for PCI cards by returning -1UL
     for timed out MMIO transactions (instead of crashing)

   - fixed HPMC handler for PAT machines: size needs to be multiple of 16

   - prepare machine_power_off() to be able to turn rp3410 and c8000
     machines off via IMPI

   - added code to extract machine info for usage with qemu

   - some init sections fixes

   - lots of fixes for sparse-, ubsan- and uninitalized variables
     warnings"

* 'parisc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix out of array access in match_pci_device()
  parisc: Add code generator for Qemu/SeaBIOS machine info
  parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
  parisc: Fix HPMC handler by increasing size to multiple of 16 bytes
  parisc: Directly call machine_power_off() in power button driver
  parisc: machine_power_off() should call pm_power_off()
  parisc/Kconfig: SMP kernels boot on all machines
  parisc: Silence uninitialized variable warning in dbl_to_sgl_fcnvff()
  parisc: Move various functions and strings to init section
  parisc: Convert MAP_TYPE to cover 4 bits on parisc
  parisc: Force to various endian types for sparse
  parisc/gscps2: Fix sparse warnings
  parisc/led: Fix sparse warnings
  parisc/parport_gsc: Use NULL to avoid sparse warning
  parisc/stifb: Use fb_memset() to avoid sparse warning
2018-04-03 15:48:04 -07:00
Linus Torvalds f5a8eb632b arch: remove obsolete architecture ports
This removes the entire architecture code for blackfin, cris, frv, m32r,
 metag, mn10300, score, and tile, including the associated device drivers.
 
 I have been working with the (former) maintainers for each one to ensure
 that my interpretation was right and the code is definitely unused in
 mainline kernels. Many had fond memories of working on the respective
 ports to start with and getting them included in upstream, but also saw
 no point in keeping the port alive without any users.
 
 In the end, it seems that while the eight architectures are extremely
 different, they all suffered the same fate: There was one company
 in charge of an SoC line, a CPU microarchitecture and a software
 ecosystem, which was more costly than licensing newer off-the-shelf
 CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
 that all the SoC product lines are still around, but have not used the
 custom CPU architectures for several years at this point. In contrast,
 CPU instruction sets that remain popular and have actively maintained
 kernel ports tend to all be used across multiple licensees.
 
 The removal came out of a discussion that is now documented at
 https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
 marking any ports as deprecated but remove them all at once after I made
 sure that they are all unused. Some architectures (notably tile, mn10300,
 and blackfin) are still being shipped in products with old kernels,
 but those products will never be updated to newer kernel releases.
 
 After this series, we still have a few architectures without mainline
 gcc support:
 
 - unicore32 and hexagon both have very outdated gcc releases, but the
   maintainers promised to work on providing something newer. At least
   in case of hexagon, this will only be llvm, not gcc.
 
 - openrisc, risc-v and nds32 are still in the process of finishing their
   support or getting it added to mainline gcc in the first place.
   They all have patched gcc-7.3 ports that work to some degree, but
   complete upstream support won't happen before gcc-8.1. Csky posted
   their first kernel patch set last week, their situation will be similar.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo
 PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb
 Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en
 yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV
 FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI
 sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG
 ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs
 cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76
 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e
 X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r
 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s
 3iIVHovno/JuJnTOE8LY
 =fQ8z
 -----END PGP SIGNATURE-----

Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...
2018-04-02 20:20:12 -07:00
Andi Shyti adf313f41a Input: stmfts, s6sy761 - update my e-mail
Because I will be leaving Samsung soon, for reachability update
my reference e-mail to etezian.org.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-30 15:31:41 -07:00
Marek Szyprowski 1d96000360 Input: stmfts - use async probe & suspend/resume to avoid 2s delay
Executing stmfts_power_on() function lasts over 2 seconds, what
significantly slows down the boot and resume processes if driver is
compiled in. Avoid this delay by forcing this driver to be probed
and suspended/resumed asynchronously.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-30 15:31:41 -07:00
Masaki Ota 567b9b549c Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
The primary interface for the touchpad device in Thinkpad L570 is SMBus,
so ALPS overlooked PS2 interface Firmware setting of TrackStick, and
shipped with TrackStick otp bit is disabled.

The address 0xD7 contains device number information, so we can identify
the device by checking this value, but to access it we need to enable
Command mode, and then re-enable the device. Devices shipped in Thinkpad
L570 report either 0x0C or 0x1D as device numbers, if we see them we assume
that the devices are DualPoints.

The same issue exists on Dell Latitude 7370.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929
Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads")
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Tested-by: Jaak Ristioja <jaak@ristioja.ee>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-30 15:30:25 -07:00
Helge Deller 3a67ca192c parisc/gscps2: Fix sparse warnings
Signed-off-by: Helge Deller <deller@gmx.de>
2018-03-27 18:52:21 +02:00
Francis Therien c6c848572f Input: xpad - add PDP device id 0x02a4
Adds support for a PDP Xbox One controller with device ID
(0x06ef:0x02a4). The Product string for this device is "PDP Wired
Controller for Xbox One - Stealth Series | Phantom Black".

Signed-off-by: Francis Therien <frtherien@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26 17:06:08 -07:00
Pali Rohár 4621c96604 Input: alps - report pressure of v3 and v7 trackstick
ALPS v3 and v7 packet formats reports trackstick pressure. This information
is already parsed in unused "z" variable.

ALPS SS4 S2 devices already reports trackstick pressure as ABS_PRESSURE
attribute, therefore reports pressure in the same way also for v3 and v7.

This patch also updates parsing v3 pressure information, it is also stored
in 7 bits.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26 17:03:05 -07:00
Marcus Folkesson 68ef4836cd Input: pxrc - new driver for PhoenixRC Flight Controller Adapter
This driver let you plug in your RC controller to the adapter and
use it as input device in various RC simulators.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26 15:22:20 -07:00
Marcus Folkesson 85f46fbf5e Input: usbtouchscreen - do not rely on input_dev->users
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().

input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:

	if (input->users || usbtouch->type->irq_always)
		result = usb_submit_urb(usbtouch->irq, GFP_NOIO);

The same URB will then be fail when resubmitted in usbtouch_open().

Introduce usbtouch->is_open to keep track of the state instead.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26 15:22:16 -07:00
Marcus Folkesson 12e510dbc5 Input: usbtouchscreen - fix deadlock in autosuspend
usb_autopm_get_interface() that is called in usbtouch_open() does an
autoresume if the device is suspended.

input_dev->mutex used in usbtouch_resume() is in this case already
taken by the input subsystem and will cause a deadlock.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-26 15:21:24 -07:00
Arnd Bergmann c957ea5c79 input: misc: remove blackfin rotary driver
The blackfin architecture is getting removed, so this
one is obsolete as well.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:56:59 +02:00
Arnd Bergmann 01b7649598 input: keyboard: remove bf54x driver
The blackfin architecture is getting removed, so this
driver is now obsolete.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:56:58 +02:00
Arnd Bergmann a687a53370 treewide: simplify Kconfig dependencies for removed archs
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.

Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:55:57 +02:00
Marcus Folkesson 553d16af23 Input: pegasus_notetaker - do not rely on input_dev->users
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().

input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:

	if (pegasus->dev->users && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0)
		retval = -EIO;

The same URB will then be fail when resubmitted in pegasus_open().

Introduce pegasus->is_open to keep track of the state instead.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-17 11:05:18 -07:00
Marcus Folkesson 1f701f6d10 Input: pagasus_notetaker - fix deadlock in autosuspend
usb_autopm_get_interface() that is called in pegasus_open() does an
autoresume if the device is suspended.

input_dev->mutex used in pegasus_resume() is in this case already
taken by the input subsystem and will cause a deadlock.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-17 11:05:18 -07:00
Marcus Folkesson ff0d2cba64 Input: synaptics_usb - do not rely on input_dev->users
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().

input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:

	if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) &&
	    usb_submit_urb(synusb->urb, GFP_NOIO) < 0) {
		retval = -EIO;
	}

The same URB will then be fail when resubmitted in synusb_open().

Introduce synusb->is_open to keep track of the state instead.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-17 11:05:18 -07:00
Marcus Folkesson b8a7cc4b5e Input: synaptics_usb - fix deadlock in autosuspend
usb_autopm_get_interface() that is called in synusb_open() does an
autoresume if the device is suspended.

input_dev->mutex used in synusb_resume() is in this case already
taken by the input subsystem and will cause a deadlock.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-17 11:05:18 -07:00
Dmitry Torokhov ba521f1bd2 Merge branch 'psmouse' into next
Merge various PS/2 handling improvements.
2018-03-17 10:58:05 -07:00
Jeffy Chen 83fc580dcc Input: gpio-keys - add support for wakeup event action
Add support for specifying event actions to trigger wakeup when using
the gpio-keys input device as a wakeup source.

This would allow the device to configure when to wakeup the system. For
example a gpio-keys input device for pen insert, may only want to wakeup
the system when ejecting the pen.

Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-14 10:13:22 -07:00
Gustavo A. R. Silva 7085123333 Input: appletouch - use true and false for boolean values
Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-14 10:13:08 -07:00
Maruyama Shohei 3993a16309 Input: silead - add Chuwi Hi8 support
This commit add ACPI support for Chuwi Hi8 tablet. On the ACPI table of
the tablet, GSL1680 is registered as MSSL0001, so the driver does not
recognize the device. This commit resolve it.

Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-14 09:56:31 -07:00
Michael Ellerman c9ab800167 Input: analog - use get_cycles() on PPC
The analog joystick driver spits a warning at us:

  drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer
  not defined for this architecture.

PPC has get_cycles() so use that.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-14 09:40:06 -07:00
Thomas Gleixner f2d6fdbfd2 Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
Now that the MONOTONIC and BOOTTIME clocks are indentical, remove all the
special casing.

The user space visible interfaces still support both clocks, but their behavior
is identical.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-input@vger.kernel.org
Link: http://lkml.kernel.org/r/20180301165150.155899327@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-13 07:34:22 +01:00
Gustavo A. R. Silva 1c4bfce1c6 Input: stmpe-keypad - remove VLA usage
In preparation to enabling -Wvla, remove VLA and replace it with a
fixed-length array instead.

Fixed as part of the directive to remove all VLAs from the kernel:
https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-10 10:18:33 -08:00
David Howells 739d875dd6 mn10300: Remove the architecture
Remove the MN10300 arch as the hardware is defunct.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Masahiro Yamada <yamada.masahiro@socionext.com>
cc: linux-am33-list@redhat.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-09 23:19:56 +01:00
Dennis Wassenberg b56af54ac7 Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
Reset i8042 before probing because of insufficient BIOS initialisation of
the i8042 serial controller. This makes Synaptics touchpad detection
possible. Without resetting the Synaptics touchpad is not detected because
there are always NACK messages from AUX port.

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-08 15:35:30 -08:00
Andrey Smirnov 62f0f079b9 Input: add RAVE SP Powerbutton driver
Add driver that properly handles input event emitted by RAVE SP
devices.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-08 15:34:45 -08:00
Dmitry Torokhov c6380ecd8e Linux 4.16-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlqceRweHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG59gH/0CVX4x6EobO/PQu
 CzLVtAoRGFuIghB6Gmbx3Q1Ck4sn4q2SqUKTtkf03yauRGvnJsEmd6wEZ8f2IOHy
 f30nX9s+4irzpQUIum4rH9KP6SMVJfNXlSVSisnamA6MbhPre3/NRcAIBUxdE4cK
 lP81TaT6Nvp5cOySlPjPdWSbN4B1froFQ6rZ/lvG406QzqCvKvlS39h6IYjOF7Ds
 zB/h3RkyuK9YyxFUO338RTEQ583esc0jTiTN4Pzb6nH3x8aTawDqGrwI2B4mkTLw
 vNSPPE2VW9to0cZX+J7TH+uusPNXIlHZCD9tXwqWe5M+sCrE2FuydnmpZIf1A2LY
 aWs0KQs=
 =4nyn
 -----END PGP SIGNATURE-----

Merge tag 'v4.16-rc4' into next

Sync up with mainline to bring in RAVE MFD device core.
2018-03-08 11:07:30 -08:00
Linus Torvalds 851710a809 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:

 - we are reverting patch that was switched touchpad on Lenovo T460P
   over to native RMI because on these boxes BIOS messes up with SMBus
   controller state. We might re-enable it later once SMBus issue is
   resolved

 - disabling interrupts in matrix_keypad driver was racy

 - mms114 now has SPDX header and matching MODULE_LICENSE

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"
  Input: matrix_keypad - fix race when disabling interrupts
  Input: mms114 - add SPDX identifier
  Input: mms114 - fix license module information
2018-03-07 17:37:32 -08:00
Arkadiusz Hiler 5444a992b4 Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"
This reverts commit 4828296982 which
caused the following issues:

1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working
after suspend-resume cycle. Due to strange state of the device another
suspend is impossible.

The following dmesg errors can be observed:
thinkpad_acpi: EC reports that Thermal Table has changed
rmi4_smbus 7-002c: failed to get SMBus version number!
rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16.
rmi4_f01 rmi4-00.fn01: Resume failed with code -16.
rmi4_physical rmi4-00: Failed to suspend functions: -16
rmi4_smbus 7-002c: Failed to resume device: -16
PM: resume devices took 0.640 seconds
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16).
rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
psmouse: probe of serio3 failed with error -1

2. On another T460p with BIOS version 2.15 two finger scrolling gesture
on the touchpad stops working after suspend-resume cycle (about 75%
reproducibility, when it still works, the scrolling gesture becomes
laggy). Nothing suspicious appears in the dmesg.

Analysis form Richard Schütz:

"RMI is unreliable on the ThinkPad T460p because the device is affected
by the firmware behavior addressed in a7ae81952c ("i2c: i801: Allow
ACPI SystemIO OpRegion to conflict with PCI BAR")."

The affected devices often show:

i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited

Reported-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Tested-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-07 15:50:29 -08:00
Florian Echtler cee1e3e2ef media: add video control handlers using V4L2 control framework
This patch registers four standard control handlers using the corresponding
V4L2 framework.

Signed-off-by: Florian Echtler <floe@butterbrot.org>
[hans.verkuil@cisco.com: lower-cased 0x0F and 0xF0]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:29:55 -05:00
Florian Echtler bbc0c4eb6b media: add panel register access functions
These functions provide write access to the internal LCD panel registers
which also control the sensor. They can be used to disable the
preprocessor, set the illumination brightness, and adjust gain/contrast
(which are stored together in one register internally called "vsvideo").

Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:29:14 -05:00
Florian Echtler 4e6c558148 media: add default settings and module parameters for video controls
This patch adds parameter definitions and module parameters for the four
userspace controls that the SUR40 can currently provide.

Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:28:45 -05:00
Florian Echtler 0a90448ead media: add missing blob structure field for tag id
The SUR40 can recognize specific printed patterns directly in hardware;
this information (i.e. the pattern id) is present but currently unused
in the blob structure.

Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-14 13:27:52 -05:00
Linus Torvalds a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Zhang Bo ea4f7bd2ac Input: matrix_keypad - fix race when disabling interrupts
If matrix_keypad_stop() is executing and the keypad interrupt is triggered,
disable_row_irqs() may be called by both matrix_keypad_interrupt() and
matrix_keypad_stop() at the same time, causing interrupts to be disabled
twice and the keypad being "stuck" after resuming.

Take lock when setting keypad->stopped to ensure that ISR will not race
with matrix_keypad_stop() disabling interrupts.

Signed-off-by: Zhang Bo <zbsdta@126.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-09 16:15:45 -08:00
Dmitry Torokhov cdc2466df4 Input: synaptics - handle errors from input_mt_init_slots()
input_mt_init_slots() may fail, we need to handle this condition.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 17:04:08 -08:00
Dmitry Torokhov 29aa619408 Input: synaptics - switch to using input_set_capability
Instead of manipulating capability bits directly, use
input_set_capability().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 17:04:08 -08:00
Dmitry Torokhov 3aceaa34d7 Input: trackpoint - combine calls to ps2_command()
We do not need to call ps2_command() several times in a row, transmitting
every byte as it were a command byte, we can often pack it all in a single
command.

Also, now that ps2_command() handles retransmission, we do not need to do
it ourselves in trackpoint_power_on_reset().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:51:32 -08:00
Dmitry Torokhov 29acc42e8e Input: libps2 - relax command byte ACK handling
When we probe PS/2 devices we first issue "Get ID" command and only if we
receive what we consider a valid keyboard or mouse ID we disable the device
and continue with protocol detection. That means that the device may be
transmitting motion or keystroke data, while we expect ACK response.

Instead of signaling failure if we see anything but ACK/NAK let's ignore
"garbage" response until we see ACK for the command byte (first byte). The
checks for subsequent ACKs of command parameters will continue be strict.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:50:28 -08:00
Dmitry Torokhov b99e1f2a1a Input: libps2 - support retransmission of command data
The devices are allowed to respond to either command byte or command
parameter with a NAK (0xfe), and the host is supposed to resend the
"correct" byte. The device then will either respond with ACK or ERR (0xfc).
Let's teach libps2 to handle the NAK responses properly, so that individual
drivers do not need to handle them.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:50:27 -08:00
Dmitry Torokhov 147b903da6 Input: libps2 - add debugging statements
Debugging via i8042.debug and analyzing raw PS/2 data stream may be
cumbersome as you need to locate the boundaries of commands, decipher the
sliced commands, etc, etc. Let's add a bit more high level debug statements
for ps2_sendbyte(), ps2_command(), and ps2_sliced_command().

We do not introduce a new module parameter, but rater rely on the kernel
having dynamic debug facility enabled (which most everyone has nowadays).
Enable with:

echo "file libps2.c +pf" > /sys/kernel/debug/dynamic_debug/control

or add "libps2.dyndbg=+pf" to the kernel command line.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:50:25 -08:00
Dmitry Torokhov 08be954b7a Input: psmouse - move sliced command implementation to libps2
In preparation to adding some debugging statements to PS/2 control
sequences let's move psmouse_sliced_command() into libps2 and rename it
to ps2_sliced_command().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:50:24 -08:00
Dmitry Torokhov b28bad65c1 Input: libps2 - use u8 for byte data
Instead of using unsigned char for the byte data switch to using u8. Also
use unsigned int for the command codes and timeouts, and have
ps2_handle_ack() and ps2_handle_response() return bool instead of int, as
they do not return error codes but rather signal whether a byte was handled
or not handled. ps2_is_keyboard_id() now returns bool as well.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:50:21 -08:00
Dmitry Torokhov d5e0d9187a Input: libps2 - fix switch statement formatting
Individual labels of switch statements should have the same indentation
level as the switch statement itself.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:50:18 -08:00
Stephen Lyons 4c711ef628 Input: psmouse - add support for 2nd wheel on A4Tech Dual-Scroll wheel mice
This Far-Eastern company's PS/2 mice use a deviant format for the data
relating to movement of the scroll wheels for, at least, their dual wheel
mice, such as their "Optical GreatEye Wheelmouse" model "WOP-35".  This
product has five "buttons" (one of which is the click action on the first
wheel) and TWO scroll wheels.  However for a byte comprising d0-d7 instead
of setting one of d6-7 in the forth byte of the mouse data packet and a
twos complement number of scroll steps in the remaining d5-d0 (or d3-d0
should there be a fourth (BTN_SIDE - d4) or fifth (BTN_EXTRA - d5) button
to report; they only report a single +/- event for each wheel and use a bit
pattern that corresponds to +/-1 for the first wheel and +/- 2 for the
second in the lower nibble of the fourth byte.

The effect with existing code is that the second mouse wheel merely repeats
the effect of the first but providing two steps per click rather than the
one of the first wheel - so there is no HORIZONTAL scroll wheel movement
detected from the device as far as the rest of the kernel sees it.

This patch, if enabled by the "a4tech_workaround" module parameter modifies
the handling just for mice of type PSMOUSE_IMEX so that the second scroll
wheel movement gets correctly reported as REL_HWHEEL events.  Should this
module parameter be activated for other mice of the same PSMOUSE_IMEX type
then it is possible that at the point where the mouse reports more than a
single movement step the user may start seeing horizontal rather than
vertical wheel events, but should the movement steps get to be more than
two at a time the hack will get immediately deactivated and the behaviour
will revert to the past code.

This was discussed around *fifteen* *years* *ago* on the LKML and the best
summary is in post https://lkml.org/lkml/2002/7/18/111 "Re: PS2 Input Core
Support" by Vojtech Pavlik. I was not able to locate any discussion later
than this on this topic.

Given that most users of the "psmouse" module will NOT want this additional
feature enabled I have taken the apparently erroneous step of defaulting
the module parameter that enables it to be "disabled" - this functionality
may interfere with the operation of "normal" mice of this type (until a
large enough scroll wheel movement is detected) so I cannot see how it
would want to be enabled for "normal" users - i.e.  everyone without this
brand of mouse.

I am using this patch at the moment and I can confirm that it is working
for me as both a module and compiled into the kernel for my mouse that is
of the type (WOP-35) described - I note that it is still available from
certain on-line retailers and that the manufacturers site does not list
GNU/Linux as being supported on the product page - this patch however does
enable full use of this product:
http://www.a4tech.com/product.asp?cid=3D1&scid=3D8&id=3D22

Signed-off-by: Stephen Lyons <slysven@virginmedia.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:49:35 -08:00
Dmitry Torokhov c13b418685 Input: lifebook - clean up code
- use u8 instead of unsigned char for byte data
- use input_set_capability() instead of manipulating capabilities bits
  directly
- do not abuse -1 as error code, propagate errors from various calls.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:49:17 -08:00
Dmitry Torokhov 592c352b95 Input: logips2pp - clean up code
- switch to using BIT() macros
- use u8 instead of unsigned char for byte data
- use input_set_capability() instead of manipulating capabilities bits
  directly
- use sign_extend32() when extracting wheel data.
- do not abuse -1 as error code, propagate errors from various calls.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:49:01 -08:00
Dmitry Torokhov ba667650c5 Input: psmouse - clean up code
- switch to using BIT() macros
- use u8 instead of unsigned char for byte data
- use input_set_capability() instead of manipulating capabilities bits
  directly
- use sign_extend32() when extracting wheel data.
- do not abuse -1 as error code, propagate errors from various calls.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:48:58 -08:00
Dmitry Torokhov 1ef8580539 Input: psmouse - create helper for reporting standard buttons/motion
Many protocol driver re-implement code to parse buttons or motion data from
the standard PS/2 protocol. Let's split the parsing into separate
functions and reuse them in protocol drivers.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:48:56 -08:00
Andi Shyti 0004520af3 Input: mms114 - add SPDX identifier
Replace the original license statement with the SPDX identifier.
Add also one line of description as recommended by the COPYING
file.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:04:10 -08:00
Andi Shyti 498e7e7ed1 Input: mms114 - fix license module information
The driver has been released with GNU Public License v2 as stated
in the header, but the module license information has been tagged
as "GPL" (GNU Public License v2 or later).

Fix the module license information so that it matches the one in
the header as "GPL v2".

Fixes: 07b8481d4a ("Input: add MELFAS mms114 touchscreen driver")
Reported-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02 16:03:56 -08:00
Linus Torvalds eea43ed86f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov:

 - evdev interface has been adjusted to extend the life of timestamps on
   32 bit systems to the year of 2108

 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
   improve chances of detecting trackpoints on the pass-through port

 - mms114 touchcsreen controller driver has been updated to support
   generic device properties and work with mms152 cntrollers

 - Goodix driver now supports generic touchscreen properties

 - couple of drivers for AVR32 architecture are gone as the architecture
   support has been removed from the kernel

 - gpio-tilt driver has been removed as there are no mainline users and
   the driver itself is using legacy APIs and relies on platform data

 - MODULE_LINECSE/MODULE_VERSION cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: goodix - use generic touchscreen_properties
  Input: mms114 - fix typo in definition
  Input: mms114 - use BIT() macro instead of explicit shifting
  Input: mms114 - replace mdelay with msleep
  Input: mms114 - add support for mms152
  Input: mms114 - drop platform data and use generic APIs
  Input: mms114 - mark as direct input device
  Input: mms114 - do not clobber interrupt trigger
  Input: edt-ft5x06 - fix error handling for factory mode on non-M06
  Input: stmfts - set IRQ_NOAUTOEN to the irq flag
  Input: auo-pixcir-ts - delete an unnecessary return statement
  Input: auo-pixcir-ts - remove custom log for a failed memory allocation
  Input: da9052_tsi - remove unused mutex
  Input: docs - use PROPERTY_ENTRY_U32() directly
  Input: synaptics-rmi4 - log when we create a guest serio port
  Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
  Input: synaptics-rmi4 - do not delete interrupt memory too early
  Input: ad7877 - use managed resource allocations
  Input: stmfts,s6sy671 - add SPDX identifier
  Input: remove atmel-wm97xx touchscreen driver
  ...
2018-02-01 10:49:58 -08:00
Linus Torvalds 47fcc0360c Driver Core updates for 4.16-rc1
Here is the set of "big" driver core patches for 4.16-rc1.
 
 The majority of the work here is in the firmware subsystem, with reworks
 to try to attempt to make the code easier to handle in the long run, but
 no functional change.  There's also some tree-wide sysfs attribute
 fixups with lots of acks from the various subsystem maintainers, as well
 as a handful of other normal fixes and changes.
 
 And finally, some license cleanups for the driver core and sysfs code.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
 s6ygQPQhZIjKk2Lxa2hC
 =Zihy
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of "big" driver core patches for 4.16-rc1.

  The majority of the work here is in the firmware subsystem, with
  reworks to try to attempt to make the code easier to handle in the
  long run, but no functional change. There's also some tree-wide sysfs
  attribute fixups with lots of acks from the various subsystem
  maintainers, as well as a handful of other normal fixes and changes.

  And finally, some license cleanups for the driver core and sysfs code.

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
  device property: Define type of PROPERTY_ENRTY_*() macros
  device property: Reuse property_entry_free_data()
  device property: Move property_entry_free_data() upper
  firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
  firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
  USB: serial: keyspan: Drop firmware Kconfig options
  sysfs: remove DEBUG defines
  sysfs: use SPDX identifiers
  drivers: base: add coredump driver ops
  sysfs: add attribute specification for /sysfs/devices/.../coredump
  test_firmware: fix missing unlock on error in config_num_requests_store()
  test_firmware: make local symbol test_fw_config static
  sysfs: turn WARN() into pr_warn()
  firmware: Fix a typo in fallback-mechanisms.rst
  treewide: Use DEVICE_ATTR_WO
  treewide: Use DEVICE_ATTR_RO
  treewide: Use DEVICE_ATTR_RW
  sysfs.h: Use octal permissions
  component: add debugfs support
  bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
  ...
2018-02-01 10:00:28 -08:00
Dmitry Torokhov 10a558374f Linux 4.15
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJabj6pAAoJEHm+PkMAQRiGs8cIAJQFkCWnbz86e3vG4DuWhyA8
 CMGHCQdUOxxFGa/ixhIiuetbC0x+JVHAjV2FwVYbAQfaZB3pfw2iR1ncQxpAP1AI
 oLU9vBEqTmwKMPc9CM5rRfnLFWpGcGwUNzgPdxD5yYqGDtcM8K840mF6NdkYe5AN
 xU8rv1wlcFPF4A5pvHCH0pvVmK4VxlVFk/2H67TFdxBs4PyJOnSBnf+bcGWgsKO6
 hC8XIVtcKCH2GfFxt5d0Vgc5QXJEpX1zn2mtCa1MwYRjN2plgYfD84ha0xE7J0B0
 oqV/wnjKXDsmrgVpncr3txd4+zKJFNkdNRE4eLAIupHo2XHTG4HvDJ5dBY2NhGU=
 =sOml
 -----END PGP SIGNATURE-----

Merge tag 'v4.15' into next

Sync with mainline to get in trackpoint updates and other changes.
2018-02-01 00:41:33 -08:00
Dmitry Torokhov d67ad78e09 Merge branch 'next' into for-linus
Prepare input updates for 4.16 merge window.
2018-02-01 00:37:30 -08:00
Marcin Niestroj fafef982c7 Input: goodix - use generic touchscreen_properties
Use touchscreen_properties structure instead of implementing all
properties by our own. It allows us to reuse generic code for parsing
device-tree properties (which was implemented manually in the driver for
now). Additionally, it allows us to report events using generic
touchscreen_report_pos(), which automatically handles inverted and
swapped axes.

This fixes the issue with the custom code incorrectly handling case where
ts->inverted_x and ts->swapped_x_y were true, but ts->inverted_y was
false. Assuming we have 720x1280 touch panel, ts->abs_x_max == 1279 and
ts->abs_y_max == 719 (because we inverted that in goodix_read_config()).
Now let's assume that we received event from (0:0) position (in touch
panel original coordinates). In function goodix_ts_report_touch() we
calculate input_x as 1279, but after swapping input_y takes that value
(which is more that maximum 719 value reported during initialization).

Note that since touchscreen coordinates are 0-indexed, we now report
touchscreen range as (0:size-1).

Developed and tested on custom DT-based device with gt1151 touch
panel.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[dtor: fix endianness annotation reported by sparse, handle errors when
 initializing MT slots]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-31 14:44:40 -08:00
Andi Shyti 13e945401a Input: mms114 - fix typo in definition
It's 'MMS114_INFORMATION', not 'MMS114_INFOMATION'

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-31 14:44:40 -08:00
Linus Torvalds 168fe32a07 Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull poll annotations from Al Viro:
 "This introduces a __bitwise type for POLL### bitmap, and propagates
  the annotations through the tree. Most of that stuff is as simple as
  'make ->poll() instances return __poll_t and do the same to local
  variables used to hold the future return value'.

  Some of the obvious brainos found in process are fixed (e.g. POLLIN
  misspelled as POLL_IN). At that point the amount of sparse warnings is
  low and most of them are for genuine bugs - e.g. ->poll() instance
  deciding to return -EINVAL instead of a bitmap. I hadn't touched those
  in this series - it's large enough as it is.

  Another problem it has caught was eventpoll() ABI mess; select.c and
  eventpoll.c assumed that corresponding POLL### and EPOLL### were
  equal. That's true for some, but not all of them - EPOLL### are
  arch-independent, but POLL### are not.

  The last commit in this series separates userland POLL### values from
  the (now arch-independent) kernel-side ones, converting between them
  in the few places where they are copied to/from userland. AFAICS, this
  is the least disruptive fix preserving poll(2) ABI and making epoll()
  work on all architectures.

  As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
  it will trigger only on what would've triggered EPOLLWRBAND on other
  architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
  at all on sparc. With this patch they should work consistently on all
  architectures"

* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
  make kernel-side POLL... arch-independent
  eventpoll: no need to mask the result of epi_item_poll() again
  eventpoll: constify struct epoll_event pointers
  debugging printk in sg_poll() uses %x to print POLL... bitmap
  annotate poll(2) guts
  9p: untangle ->poll() mess
  ->si_band gets POLL... bitmap stored into a user-visible long field
  ring_buffer_poll_wait() return value used as return value of ->poll()
  the rest of drivers/*: annotate ->poll() instances
  media: annotate ->poll() instances
  fs: annotate ->poll() instances
  ipc, kernel, mm: annotate ->poll() instances
  net: annotate ->poll() instances
  apparmor: annotate ->poll() instances
  tomoyo: annotate ->poll() instances
  sound: annotate ->poll() instances
  acpi: annotate ->poll() instances
  crypto: annotate ->poll() instances
  block: annotate ->poll() instances
  x86: annotate ->poll() instances
  ...
2018-01-30 17:58:07 -08:00
Andi Shyti 7546db025f Input: mms114 - use BIT() macro instead of explicit shifting
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-30 10:08:16 -08:00
Andi Shyti a22e88fd7d Input: mms114 - replace mdelay with msleep
200 milliseconds is a very long time to keep the CPU busy looping.
Use msleep instead.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-30 10:08:12 -08:00
Simon Shields 72b0c0cf97 Input: mms114 - add support for mms152
MMS152 has no configuration registers, but the packet format used in
interrupts is identical to mms114.

Signed-off-by: Simon Shields <simon@lineageos.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-26 11:27:45 -08:00
Simon Shields 5b0d0033f3 Input: mms114 - drop platform data and use generic APIs
The MMS114 platform data has no in-tree users, so drop it.

Switch to using the standard touchscreen properties via
touchscreen_parse_properties(), and move the old DT parsing code
to use device_property_*() APIs.

Finally, use touchscreen_report_pos to report x/y coordinates
and drop the custom x/y inversion code.

Signed-off-by: Simon Shields <simon@lineageos.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-26 11:27:23 -08:00
Dmitry Torokhov 477baf7e9a Input: mms114 - mark as direct input device
mms14 is a touchscreen and thus a direct input device; let's mark it
as such. This also allows us to drop some initialization code as
input_init_mt_slots() will do that for us.

Also add error handling for input_mt_init_slots().

Reviewed-by: Simon Shields <simon@lineageos.org>
Tested-by: Simon Shields <simon@lineageos.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-26 11:27:18 -08:00
Dmitry Torokhov 5e703b8834 Input: mms114 - do not clobber interrupt trigger
Rely on the platform (device tree, ACPI, etc) to properly configure
interrupt trigger/polarity instead of hardcoding the falling edge.

Reviewed-by: Simon Shields <simon@lineageos.org>
Tested-by: Simon Shields <simon@lineageos.org>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-26 11:27:14 -08:00
Linus Torvalds 993ca2068b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "The main item is that we try to better handle the newer trackpoints on
  Lenovo devices that are now being produced by Elan/ALPS/NXP and only
  implement a small subset of the original IBM trackpoint controls"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"
  Input: trackpoint - only expose supported controls for Elan, ALPS and NXP
  Input: trackpoint - force 3 buttons if 0 button is reported
  Input: xpad - add support for PDP Xbox One controllers
  Input: stmfts,s6sy671 - add SPDX identifier
2018-01-25 17:30:47 -08:00
Nick Dyer 060403f340 Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"
Since the sysfs attribute hangs off the RMI bus, which doesn't go away during
firmware flash, it needs to be explicitly removed, otherwise we would try and
register the same attribute twice.

This reverts commit 36a44af5c1.

Signed-off-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-24 14:44:05 -08:00
Dmitry Torokhov 4b3e910d7f Input: edt-ft5x06 - fix error handling for factory mode on non-M06
When attempting enter factory mode on firmware that does not support it,
we'd error out, but leave the device with interrupts disabled, and thus
touch not working. Fix it by moving the check before we disable
interrupts/allocate memory for debug buffers.

Fixes: fd335ab04b ("Input: edt-ft5x06 - add support for M09 firmware version")
Reviewed-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-24 14:43:10 -08:00
Andi Shyti cba04cdf43 Input: stmfts - set IRQ_NOAUTOEN to the irq flag
The interrupt is requested before the device is powered on and
it's value in some cases cannot be reliable. It happens on some
devices that an interrupt is generated as soon as requested
before having the chance to disable the irq.

Set the irq flag as IRQ_NOAUTOEN before requesting it.

This patch mutes the error:

  stmfts 2-0049: failed to read events: -11

received sometimes during boot time.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 17:35:16 -08:00
Markus Elfring 2cdc874961 Input: auo-pixcir-ts - delete an unnecessary return statement
The script "checkpatch.pl" pointed information out like the following:

WARNING: void function return statements are not generally useful

Thus remove such a statement in the affected function.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:28:59 -08:00
Markus Elfring eae7d90c92 Input: auo-pixcir-ts - remove custom log for a failed memory allocation
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:28:24 -08:00
Marcus Folkesson aac21bbbf7 Input: da9052_tsi - remove unused mutex
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:28:03 -08:00
Dmitry Torokhov 9f87b9fc36 Input: synaptics-rmi4 - log when we create a guest serio port
To ease analyzing boot behavior from logs, let's log when we are about to
register the pass-through serio port.

Also, let's drop "Synaptics" prefix from the port name, as RMI4 is good
enough indicator already, and having the prefix means that the name does
not fit into serio->name field. While at it move from hard-coded seio->phys
to one mentioning the sensor ID (such as "rmi4-00.fn03/serio0").

Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:27:40 -08:00
Dmitry Torokhov 6abe534f07 Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
Currently we register the pass-through serio port when we probe the F03 RMI
function, and then, in sensor configure phase, we unmask interrupts.
Unfortunately this is too late, as other drivers are free probe devices
attached to the serio port as soon as it is probed. Because interrupts are
masked, the IO times out, which may result in not being able to detect
trackpoints on the pass-through port.

To fix the issue we implement open() and close() methods for the
pass-through serio port and unmask interrupts from there. We also move
creation of the pass-through port form probe to configure stage, as RMI
driver does not enable transport interrupt until all functions are probed
(we should change this, but this is a separate topic).

We also try to clear the pending data before unmasking interrupts, because
some devices like to spam the system with multiple 0xaa 0x00 announcements,
which may interfere with us trying to query ID of the device.

Fixes: c5e8848fc9 ("Input: synaptics-rmi4 - add support for F03")
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:27:31 -08:00
Dmitry Torokhov a1ab69021a Input: synaptics-rmi4 - do not delete interrupt memory too early
We want to free memory reserved for interrupt mask handling only after we
free functions, as function drivers might want to mask interrupts. This is
needed for the followup patch to the F03 that would implement unmasking and
masking interrupts from the serio pass-through port open() and close()
methods.

Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:27:22 -08:00
Andi Shyti fbe6a536cf Input: ad7877 - use managed resource allocations
Use managed resource allocations to simplify error handling during
probing failure and module exiting.

With this all the goto labels in the probe function together with
the cleanups in the remove function are unnecessary, therefore
removed.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:25:53 -08:00
Andi Shyti f8c5938f69 Input: stmfts,s6sy671 - add SPDX identifier
Replace the original license statement with the SPDX identifier.

Update also the copyright owner adding myself as co-owner of the
copyright.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:25:48 -08:00
Dmitry Torokhov 2a924d7179 Input: trackpoint - only expose supported controls for Elan, ALPS and NXP
The newer trackpoints from ALPS, Elan and NXP implement a very limited
subset of extended commands and controls that the original trackpoints
implemented, so we should not be exposing not working controls in sysfs.
The newer trackpoints also do not implement "Power On Reset" or "Read
Extended Button Status", so we should not be using these commands during
initialization.

While we are at it, let's change "unsigned char" to u8 for byte data or
bool for booleans and use better suited error codes instead of -1.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:24:36 -08:00
Aaron Ma f5d07b9e98 Input: trackpoint - force 3 buttons if 0 button is reported
Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands.
They supposed to reply with 0x02, 0x03, or 0x04 in response to the
"Read Extended ID" command, so we would know not to try certain extended
commands. Unfortunately even some trackpoints reporting the original IBM
version (0x01 firmware 0x0e) now respond with incorrect data to the "Get
Extended Buttons" command:

 thinkpad_acpi: ThinkPad BIOS R0DET87W (1.87 ), EC unknown
 thinkpad_acpi: Lenovo ThinkPad E470, model 20H1004SGE

 psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 0/0

Since there are no trackpoints without buttons, let's assume the trackpoint
has 3 buttons when we get 0 response to the extended buttons query.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196253
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 16:23:17 -08:00
Mark Furneaux e5c9c6a885 Input: xpad - add support for PDP Xbox One controllers
Adds support for the current lineup of Xbox One controllers from PDP
(Performance Designed Products). These controllers are very picky with
their initialization sequence and require an additional 2 packets before
they send any input reports.

Signed-off-by: Mark Furneaux <mark@furneaux.ca>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 11:33:40 -08:00
Andi Shyti f30fefd894 Input: stmfts,s6sy671 - add SPDX identifier
Replace the original license statement with the SPDX identifier.

Update also the copyright owner adding myself as co-owner of the
copyright.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-22 11:32:16 -08:00
Linus Torvalds 672bb0fa9a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:

 - a fix for use-after-free in Synaptics RMI4 driver

 - correction to multitouch contact tracking on certain ALPS touchpads
   (which got broken when we tried to fix the 2-finger scrolling)

 - touchpad on Lenovo T640p is switched over to SMbus/RMI

 - a few device node refcount fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - prevent UAF reported by KASAN
  Input: ALPS - fix multi-touch decoding on SS4 plus touchpads
  Input: synaptics - Lenovo Thinkpad T460p devices should use RMI
  Input: of_touchscreen - add MODULE_LICENSE
  Input: 88pm860x-ts - fix child-node lookup
  Input: twl6040-vibra - fix child-node lookup
  Input: twl4030-vibra - fix sibling-node lookup
2018-01-19 11:36:09 -08:00
Corentin Labbe 082dc4dcc3 Input: remove atmel-wm97xx touchscreen driver
Since AVR32 arch is gone, atmel-wm97xx driver is useless. In theory it
could have been rewritten to work with AT91 devices, but the driver is from
the platform data era, and a bit hard coded to work on AVR32 hardware
variant of the AC97C peripheral, so let's remove it.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-19 09:35:24 -08:00
Nick Desaulniers 55edde9fff Input: synaptics-rmi4 - prevent UAF reported by KASAN
KASAN found a UAF due to dangling pointer. As the report below says,
rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in
rmi_irq_fn.

[  311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core]
[  311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162
[  311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2
[  311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017
[  311.424078] Call Trace:
[  311.424086]  dump_stack+0xae/0x12d
[  311.424090]  ? _atomic_dec_and_lock+0x103/0x103
[  311.424094]  ? show_regs_print_info+0xa/0xa
[  311.424099]  ? input_handle_event+0x10b/0x810
[  311.424104]  print_address_description+0x65/0x229
[  311.424108]  kasan_report.cold.5+0xa7/0x281
[  311.424117]  rmi_f11_attention+0x526/0x5e0 [rmi_core]
[  311.424123]  ? memcpy+0x1f/0x50
[  311.424132]  ? rmi_f11_attention+0x526/0x5e0 [rmi_core]
[  311.424143]  ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core]
[  311.424153]  ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core]
[  311.424163]  ? rmi_irq_fn+0x22c/0x270 [rmi_core]
[  311.424173]  ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[  311.424177]  ? free_irq+0xa0/0xa0
[  311.424180]  ? irq_finalize_oneshot.part.39+0xeb/0x180
[  311.424190]  ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[  311.424193]  ? irq_thread_fn+0x3d/0x80
[  311.424197]  ? irq_finalize_oneshot.part.39+0x180/0x180
[  311.424200]  ? irq_thread+0x21d/0x290
[  311.424203]  ? irq_thread_check_affinity+0x170/0x170
[  311.424207]  ? remove_wait_queue+0x150/0x150
[  311.424212]  ? kasan_unpoison_shadow+0x30/0x40
[  311.424214]  ? __init_waitqueue_head+0xa0/0xd0
[  311.424218]  ? task_non_contending.cold.55+0x18/0x18
[  311.424221]  ? irq_forced_thread_fn+0xa0/0xa0
[  311.424226]  ? irq_thread_check_affinity+0x170/0x170
[  311.424230]  ? kthread+0x19e/0x1c0
[  311.424233]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[  311.424237]  ? ret_from_fork+0x32/0x40

[  311.424244] Allocated by task 899:
[  311.424249]  kasan_kmalloc+0xbf/0xe0
[  311.424252]  __kmalloc_track_caller+0xd9/0x1f0
[  311.424255]  kmemdup+0x17/0x40
[  311.424264]  rmi_set_attn_data+0xa4/0x1b0 [rmi_core]
[  311.424269]  rmi_raw_event+0x10b/0x1f0 [hid_rmi]
[  311.424278]  hid_input_report+0x1a8/0x2c0 [hid]
[  311.424283]  i2c_hid_irq+0x146/0x1d0 [i2c_hid]
[  311.424286]  irq_thread_fn+0x3d/0x80
[  311.424288]  irq_thread+0x21d/0x290
[  311.424291]  kthread+0x19e/0x1c0
[  311.424293]  ret_from_fork+0x32/0x40

[  311.424296] Freed by task 1162:
[  311.424300]  kasan_slab_free+0x71/0xc0
[  311.424303]  kfree+0x90/0x190
[  311.424311]  rmi_irq_fn+0x1b2/0x270 [rmi_core]
[  311.424319]  rmi_irq_fn+0x257/0x270 [rmi_core]
[  311.424322]  irq_thread_fn+0x3d/0x80
[  311.424324]  irq_thread+0x21d/0x290
[  311.424327]  kthread+0x19e/0x1c0
[  311.424330]  ret_from_fork+0x32/0x40

[  311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64
[  311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100)
[  311.424344] The buggy address belongs to the page:
[  311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0
[  311.424353] flags: 0x17ffffc0000100(slab)
[  311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a
[  311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000
[  311.424366] page dumped because: kasan: bad access detected

[  311.424369] Memory state around the buggy address:
[  311.424373]  ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  311.424377]  ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb
[  311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb
[  311.424384]                                                     ^
[  311.424387]  ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[  311.424391]  ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb

Cc: stable@vger.kernel.org
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-18 11:40:13 -08:00
Colin Ian King deb106beb7 Input: cyapa - remove redundant assignment to 'pwr_cmd'
The variable pwr_cmd is being assigned to cyapa->suspend_power_mode
twice, once during the declaration and once after taking an
interruptible mutex lock.  Remove the redundant first assignment
since the value is never read and it is outside the mutex lock.

Cleans up clang warning:
drivers/input/mouse/cyapa.c:743:5: warning: Value stored to 'pwr_cmd'
during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-18 11:39:49 -08:00
Corentin Labbe 0de4502725 Input: remove at32psif
Since AVR32 arch is gone, at32psif driver is useless.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-18 11:39:48 -08:00
Julia Lawall 698c03b474 Input: inline macros for MODULE_LICENSE, etc
Inline macro for MODULE_LICENSE to make the license information easy to
find, eg with grep.  Inline the other module-related macros at the same
time.

A simplified version of the semantic patch for the MODULE_LICENSE
case is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@s@
identifier i; expression e;
@@

@@
declarer name MODULE_LICENSE;
identifier s.i;
expression s.e;
@@
MODULE_LICENSE(
- i
+ e
 );
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
[dtor: added a couple of drivers missed by the script, removed a few unused
 DRIVER_VERSION macros]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-17 09:52:22 -08:00
Greg Kroah-Hartman 77ecf14e9e Input: remove remaining unneeded MODULE_VERSION() usage
MODULE_VERSION is useless for in-kernel drivers, so just remove all
usage of it in the remaining few input drivers that still used it
(input-polldev and sparse-keymap).

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 16:48:25 -08:00
Greg Kroah-Hartman 141fc3fcfd Input: remove unneeded MODULE_VERSION() usage in misc input drivers
MODULE_VERSION is useless for in-kernel drivers, so just remove all
usage of it in the misc input drivers.  Along with this, some
DRIVER_VERSION macros were removed as they are also pointless.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 16:48:24 -08:00
Greg Kroah-Hartman 4f7fc9b561 Input: remove unneeded MODULE_VERSION() usage in touchscreen drivers
MODULE_VERSION is useless for in-kernel drivers, so just remove all
usage of it in the touchscreen drivers.  Along with this, some
DRV_VERSION macros were removed as they are also pointless.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 16:48:23 -08:00
Greg Kroah-Hartman 98c6a3aa41 Input: elan_i2c - remove unneeded MODULE_VERSION() usage
MODULE_VERSION is useless for in-kernel drivers, so just remove all
usage of it in the elan_i2c mouse driver.  Now that this is gone, the
ELAN_DRIVER_VERSION define was also removed as it was pointless.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 16:48:22 -08:00
Greg Kroah-Hartman 932553c414 Input: pmic8xxx-keypad - remove unneeded MODULE_VERSION() usage
MODULE_VERSION is useless for in-kernel drivers, so remove the use of it
in the pmic8xxx-keyboard driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 16:48:21 -08:00
Greg Kroah-Hartman b6492b0917 Input: synaptics_rmi4 - remove unneeded MODULE_VERSION() usage
MODULE_VERSION is useless for in-kernel drivers, so just remove all
usage of it in the rmi4 drivers.  Now that this is gone, the
RMI_DRIVER_VERSION macro was also removed as it was pointless.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 16:48:20 -08:00
Greg Kroah-Hartman 9f1d1ea3e0 Input: remove unneeded DRIVER_LICENSE #defines
There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.

This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference.  For some of these drivers, the #define is just a
few lines above the MODULE_LICENSE() line, which is extra pointless.

Reported-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 16:47:33 -08:00
Peter Hutterer 19eb4ed114 Input: synaptics - reset the ABS_X/Y fuzz after initializing MT axes
input_mt_init_slots() resets the ABS_X/Y fuzz to 0 and expects the driver
to call input_mt_report_pointer_emulation(). That is based on the MT
position bits which are already defuzzed - hence a fuzz of 0.

In the case of synaptics semi-mt devices, we report the ABS_X/Y axes
manually.  This results in the MT position being defuzzed but the
single-touch emulation missing that defuzzing.

Work around this by re-initializing the ABS_X/Y axes after the MT axis to
get the same fuzz value back.

https://bugs.freedesktop.org/show_bug.cgi?id=104533

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 16:26:25 -08:00
Dmitry Torokhov 2bc4298f59 Input: psmouse - fix Synaptics detection when protocol is disabled
When Synaptics protocol is disabled, we still need to try and detect the
hardware, so we can switch to SMBus device if SMbus is detected, or we know
that it is Synaptics device and reset it properly for the bare PS/2
protocol.

Fixes: c378b5119e ("Input: psmouse - factor out common protocol probing code")
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-16 13:30:51 -08:00
Hans de Goede faec44b683 Input: goodix - disable IRQs while suspended
We should not try to do any i2c transfers before the controller is
resumed (which happens before our resume method gets called).

So we need to disable our IRQ while suspended to enforce this. The
code paths for devices with GPIOs for the int and reset pins already
disable the IRQ the through goodix_free_irq().

This commit also disables the IRQ while suspended for devices without
GPIOs for the int and reset pins.

This fixes the i2c bus sometimes getting stuck after a suspend/resume
causing the touchscreen to sometimes not work after a suspend/resume.
This has been tested on a GPD pocked device.

BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10
BugLink: https://www.reddit.com/r/GPDPocket/comments/7niut2/fix_for_broken_touch_after_resume_all_linux/
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-12 00:42:47 -08:00
Nir Perry 4d94e776bd Input: ALPS - fix multi-touch decoding on SS4 plus touchpads
The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS -
fix two-finger scroll breakage in right side on ALPS touchpad")
introduced a minor "typo" that broke decoding of multi-touch events are
decoded on some ALPS touchpads.  For example, tapping with three-fingers
can no longer be used to emulate middle-mouse-button (the kernel doesn't
recognize this as the proper event, and doesn't report it correctly to
userspace).  This affects touchpads that use SS4 "plus" protocol
variant, like those found on Dell E7270 & E7470 laptops (tested on
E7270).

First, probably the code in alps_decode_ss4_v2() for case
SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see
0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part.

Second, in the previous patch, new macros were introduced to decode X
coordinates specific to the SS4 "plus" variant, but the macro to
define the maximum X value wasn't changed accordingly. The macros to
decode X values for "plus" variant are effectively shifted right by 1
bit, but the max wasn't shifted too. This causes the driver to
incorrectly handle "no data" cases, which also interfered with how
multi-touch was handled.

Fixes: 4a646580f7 ("Input: ALPS - fix two-finger scroll breakage...")
Signed-off-by: Nir Perry <nirperry@gmail.com>
Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-12 00:41:36 -08:00
王振杰 4828296982 Input: synaptics - Lenovo Thinkpad T460p devices should use RMI
The tpouchpad/trackpoint on Lenovo Thinkpad T460p work with smbus/RMI.

Signed-off-by: Zhenjie Wang <zhenjie.wang@sjtu.edu.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-10 16:38:41 -08:00
Arnd Bergmann 43173a0ecc Input: of_touchscreen - add MODULE_LICENSE
The lack of the MODULE_LICENSE tag can lead to a warning here:

WARNING: modpost: missing MODULE_LICENSE() in drivers/input/touchscreen/of_touchscreen.o

I'm adding a license and description tag, but no MODULE_AUTHOR()
as this file is a collection of standalone helper functions that
were all added by different developers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-10 16:38:12 -08:00
Deepa Dinamani 152194fe9c Input: extend usable life of event timestamps to 2106 on 32 bit systems
The input events use struct timeval to store event time, unfortunately
this structure is not y2038 safe and is being replaced in kernel with
y2038 safe structures.

Because of ABI concerns we can not change the size or the layout of
structure input_event, so we opt to re-interpreting the 'seconds' part
of timestamp as an unsigned value, effectively doubling the range of
values, to year 2106.

Newer glibc that has support for 32 bit applications to use 64 bit
time_t supplies __USE_TIME_BITS64 define [1], that we can use to present
the userspace with updated input_event layout. The updated layout will
cause the compile time breakage, alerting applications and distributions
maintainers to the issue. Existing 32 binaries will continue working
without any changes until 2038.

Ultimately userspace applications should switch to using monotonic or
boot time clocks, as realtime clock is not very well suited for input
event timestamps as it can go backwards (see a80b83b7b8 "Input: evdev -
add CLOCK_BOOTTIME support" by by John Stultz). With monotonic clock the
practical range of reported times will always fit into the pair of 32
bit values, as we do not expect any system to stay up for a hundred
years without a single reboot.

[1] https://sourceware.org/glibc/wiki/Y2038ProofnessDesign

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Patchwork-Id: 10148083
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-09 16:40:30 -08:00
Hans de Goede eca3be9b95 Input: silead - add support for capactive home button found on some x86 tablets
On some x86 tablets with a silead touchscreen the windows logo on the
front is a capacitive home button. Touching this button results in a touch
with bits 12-15 of the Y coordinates set, while normally only the lower 12
are used.

Detect this and report a KEY_LEFTMETA press when this happens. Note for
now we only respond to the Y coordinate bits 12-15 containing 0x01, on some
tablets *without* a capacative button I've noticed these bits containing
0x04 when crossing the edges of the screen.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-09 16:38:06 -08:00
Joe Perches 6cbaefb4bf treewide: Use DEVICE_ATTR_WO
Convert DEVICE_ATTR uses to DEVICE_ATTR_WO where possible.

Done with perl script:

$ git grep -w --name-only DEVICE_ATTR | \
  xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IWUSR\s*|\s*0200\s*)\)?\s*,\s*NULL\s*,\s*\s_store\s*\)/DEVICE_ATTR_WO(\1)/g; print;}'

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09 16:34:35 +01:00
Rasmus Villemoes da7bdec455 Input: cyapa - remove duplicated macro definitions
Apart from whitespace differences, this block of macros is repeated
twice:

$ x=./drivers/input/mouse/cyapa_gen3.c; diff -w -u <(sed -n '139,181p' $x) <(sed -n '182,224p' $x)
$

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-08 17:42:00 -08:00
Johan Hovold 906bf7daa0 Input: 88pm860x-ts - fix child-node lookup
Fix child node-lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.

To make things worse, the parent node was prematurely freed, while the
child node was leaked.

Fixes: 2e57d56747 ("mfd: 88pm860x: Device tree support")
Cc: stable <stable@vger.kernel.org>     # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-08 17:40:59 -08:00
Johan Hovold dcaf12a8b0 Input: twl6040-vibra - fix child-node lookup
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.

Later sanity checks on node properties (which would likely be missing)
should prevent this from causing much trouble however, especially as the
original premature free of the parent node has already been fixed
separately (but that "fix" was apparently never backported to stable).

Fixes: e7ec014a47 ("Input: twl6040-vibra - update for device tree support")
Fixes: c52c545ead ("Input: twl6040-vibra - fix DT node memory management")
Cc: stable <stable@vger.kernel.org>     # 3.6
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> (on Pyra OMAP5 hardware)
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-08 17:40:55 -08:00
Johan Hovold 5b18920199 Input: twl4030-vibra - fix sibling-node lookup
A helper purported to look up a child node based on its name was using
the wrong of-helper and ended up prematurely freeing the parent of-node
while searching the whole device tree depth-first starting at the parent
node.

Fixes: 64b9e4d803 ("input: twl4030-vibra: Support for DT booted kernel")
Fixes: e661d0a044 ("Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning")
Cc: stable <stable@vger.kernel.org>     # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-08 17:40:52 -08:00
Linus Torvalds 65c64d1845 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Just a few driver fixups, nothing exciting"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xen-kbdfront - do not advertise multi-touch pressure support
  Input: hideep - fix compile error due to missing include file
  Input: elants_i2c - do not clobber interrupt trigger on x86
  Input: joystick/analog - riscv has get_cycles()
  Input: elantech - add new icbody type 15
  Input: ims-pcu - fix typo in the error message
2018-01-05 16:45:06 -08:00
Pravin Shedge 28f9fe57dd Input: synaptic_rmi4 - remove duplicate include in F34
This duplicate include has been found with scripts/checkincludes.pl but
it has been removed manually to avoid removing false positives.

Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Patchwork-Id: 10092051
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-05 09:29:09 -08:00
Jeffrey Lin 92a37438ce Input: raydium_i2c_ts - include hardware version in firmware name
Add hardware version to the firmware file name to handle scenarios where
single system image supports variety of devices.

Signed-off-by: Jeffrey Lin <jeffrey.lin@rad-ic.com>
Patchwork-Id: 10127677
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-05 09:28:39 -08:00
Oleksandr Andrushchenko 02a0d9216d Input: xen-kbdfront - do not advertise multi-touch pressure support
Some user-space applications expect multi-touch pressure
on contact to be reported if it is advertised in device
properties. Otherwise, such applications may treat reports
not as actual touches, but hovering. Currently this is
only advertised, but not reported.
Fix this by not advertising that ABS_MT_PRESSURE is supported.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Patchwork-Id: 10140017
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-02 09:41:47 -08:00
Zhuohua Li b8af0b5b92 Input: tps65218-pwrbutton - fix a spelling mistake in Kconfig
Fix a spelling mistake: buttong -> button

Signed-off-by: Zhuohua Li <lizhuohua1994@gmail.com>
Patchwork-Id: 10134469
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-01 22:54:42 -08:00
Linus Walleij 3c8a23c29d Input: gpio_tilt - delete driver
This driver was merged in 2011 as a tool for detecting the orientation
of a screen. The device driver assumes board file setup using the
platform data from <linux/input/gpio_tilt.h>. But no boards in the
kernel tree defines this platform data.

As I am faced with refactoring drivers to use GPIO descriptors and
pass decriptor tables from boards, or use the device tree device
drivers like these creates a serious problem: I cannot fix them and
cannot test them, not even compile-test them with a system actually
using it (no in-tree boardfile).

I suggest to delete this driver and rewrite it using device tree if
it is still in use on actively maintained systems.

I can also offer to rewrite it out of the blue using device tree if
someone promise to test it and help me iterate it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Patchwork-Id: 10133609
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-01 22:54:42 -08:00
Deepa Dinamani b3495cecb2 Input: uinput - use monotonic times for timestamps
struct timeval which is part of struct input_event to maintain the event
times is not y2038 safe.

Real time timestamps are also not ideal for input_event as this time can go
backwards as noted in the patch a80b83b7b8 by John Stultz.

The patch switches the timestamps to use monotonic time from realtime time.
This is assuming no one is using absolute times from these timestamps.

The structure to maintain input events will be changed in a different
patch.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Patchwork-Id: 10118255
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-01 22:54:42 -08:00
Arnd Bergmann d09ac610ea Input: hp_sdc - convert to ktime_get()
This gets rid of the deprecated do_gettimeofday() call in favor
of ktime_get(), which is also more reliable as it uses monotonic
times. The code now gets a bit simpler.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patchwork-Id: 10076621
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-01 21:39:12 -08:00
WEN Pingbo 59d805af41 Input: hil_mlc - convert timeval to jiffies
struct timeval is not y2038 safe, and what mlc->instart do is
scheduling a task in a fixed timeout, so jiffies is the
simplest choice here.

In hilse_donode(), the expires in mod_timer equals

	jiffies + intimeout - (now - instart)

If we use jiffies in 'now', the expires equals

	instart + intimeout

So, all we need to do is that making sure expires is a future
timestamp before passed it to mod_timer.

[arnd: slightly simplified patch further]

Link: https://lists.linaro.org/pipermail/y2038/2015-October/000937.html
Signed-off-by: WEN Pingbo <pingbo.wen@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patchwork-Id: 10076615
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-01 21:39:12 -08:00
WEN Pingbo ac45e6293f Input: hil_mlc - convert timeval to time64_t
Since mlc->lcv_t is only interested in seconds, directly using time64_t
here.

This gets rid of the deprecated do_gettimeofday() and avoids problems
with time going backwards since we now use the monotonic clocksource.

Signed-off-by: WEN Pingbo <pingbo.wen@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patchwork-Id: 10076611
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-01-01 21:39:12 -08:00
Anthony Kim 8b7e9d9e2d Input: hideep - fix compile error due to missing include file
gpiod_() API requires including "linux/gpio/consumer.h". Also, we are not
using the legacy API nor the static board files descriptions, so no need to
include gpio.h nor gpio/machine.h.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Anthony Kim <anthony.kim@hideep.com>
Patchwork-Id: 10094831
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-12-18 13:40:15 -08:00
Dmitry Torokhov 4c83c071b7 Input: elants_i2c - do not clobber interrupt trigger on x86
This is similar to commit a4b0a58bb1 ("Input: elan_i2c - do not
clobber interrupt trigger on x86")

On x86 we historically used falling edge interrupts in the driver
because that's how first Chrome devices were configured. They also
did not use ACPI to enumerate I2C devices (because back then there
was no kernel support for that), so trigger was hard-coded in the
driver. However the controller behavior is much more reliable if
we use level triggers, and that is how we configured ARM devices,
and how want to configure newer x86 devices as well. All newer
x86 boxes have their I2C devices enumerated in ACPI.

Let's see if platform code (ACPI, DT) described interrupt and
specified particular trigger type, and if so, let's use it instead
of always clobbering trigger with IRQF_TRIGGER_FALLING. We will
still use this trigger type as a fallback if platform code left
interrupt trigger unconfigured.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-29 22:52:51 -08:00
Olof Johansson da8df83957 Input: joystick/analog - riscv has get_cycles()
Fixes:

drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp]

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-29 22:52:02 -08:00
Al Viro afc9a42b74 the rest of drivers/*: annotate ->poll() instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28 11:06:58 -05:00
Aaron Ma 10d900303f Input: elantech - add new icbody type 15
The touchpad of Lenovo Thinkpad L480 reports it's version as 15.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-26 16:16:43 -08:00
Zhen Lei 5ddc3c656b Input: ims-pcu - fix typo in the error message
1. change "to" to "too".
2. move ")" to the front of "\n", which discovered by Joe Perches.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-26 16:16:31 -08:00
Kees Cook 841b86f328 treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:

    perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
        $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)

    perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
        $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)

The now unused macros are also dropped from include/linux/timer.h.

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 16:35:54 -08:00
Kees Cook e99e88a9d2 treewide: setup_timer() -> timer_setup()
This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

    void my_callback(struct something *ptr)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

    void my_callback(unsigned long data)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

    void my_callback(struct timer_list *unused)
    {
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
	-I ./arch/x86/include -I ./arch/x86/include/generated \
	-I ./include -I ./arch/x86/include/uapi \
	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
	--dir . \
	--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
 _E->_timer@_stl.function = _callback;
|
 _E->_timer@_stl.function = &_callback;
|
 _E->_timer@_stl.function = (_cast_func)_callback;
|
 _E->_timer@_stl.function = (_cast_func)&_callback;
|
 _E._timer@_stl.function = _callback;
|
 _E._timer@_stl.function = &_callback;
|
 _E._timer@_stl.function = (_cast_func)_callback;
|
 _E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
	... when != _origarg
	_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+	_handletype *_origarg = from_timer(_origarg, t, _timer);
+
	... when != _origarg
-	(_handletype *)_origarg
+	_origarg
	... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
	    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
	    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+	_handletype *_handle = from_timer(_handle, t, _timer);
	...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
	    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
-	_handletype *_handle = from_timer(_handle, t, _timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
	    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
	... when != _origarg
 }

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 15:57:07 -08:00
Kees Cook 24ed960abf treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".

Done using the following semantic patch:

@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@

 DEFINE_TIMER(_timer, _callback);

@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@

 void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
 { ... }

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 15:57:05 -08:00
Linus Torvalds 9f7a9b1191 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - three new touchscreen drivers: EETI EXC3000, HiDeep, and Samsung
   S6SY761

 - the timer API conversion (setup_timer() -> timer_setup())

 - a few drivers swiytched to using managed API for creating custom
   device attributes

 - other assorted fixed and cleanups.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
  Input: gamecon - mark expected switch fall-throughs
  Input: sidewinder - mark expected switch fall-throughs
  Input: spaceball - mark expected switch fall-throughs
  Input: uinput - unlock on allocation failure in ioctl
  Input: add support for the Samsung S6SY761 touchscreen
  Input: add support for HiDeep touchscreen
  Input: st1232 - remove obsolete platform device support
  Input: convert autorepeat timer to use timer_setup()
  media: ttpci: remove autorepeat handling and use timer_setup
  Input: cyttsp4 - avoid overflows when calculating memory sizes
  Input: mxs-lradc - remove redundant assignment to pointer input
  Input: add I2C attached EETI EXC3000 multi touch driver
  Input: goodix - support gt1151 touchpanel
  Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs
  Input: hil_mlc - convert to using timer_setup()
  Input: hp_sdc - convert to using timer_setup()
  Input: touchsceen - convert timers to use timer_setup()
  Input: keyboard - convert timers to use timer_setup()
  Input: uinput - fold header into the driver proper
  Input: uinput - remove uinput_allocate_device()
  ...
2017-11-14 18:07:18 -08:00
Linus Torvalds 4e4510fec4 sound updates for 4.15-rc1
There are no big surprising changes in this cycle, yet not too
 boring, either.  The biggest change from diffstat POV is the removal
 of the legacy OSS driver codes that have been already disabled for a
 long time.  This will bring a few trivial merge conflicts.
 
 As new features in ASoC side, there are two things: a new AC97 bus
 implementation and AMD Stony platform support.  Both include the
 relevant changes shared with other subsystems, e.g. AC97 MFD changes
 and DRM AMD changes.
 
 Some other highlighted topics are:
 - A bunch of USB-audio drivers got the hardening against the malicious
   device accesses with a new helper code for endpoint sanity check.
 - Lots of cleanups for ASoC Intel platform code, including support for
   their open source audio firmware.
 - Continued ASoC core componentization works.
 - Support for scaling MCLK with sample rate in ASoC simple-card.
 - Stabler PCM hot-unplug capability, especially for ASoC usages.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAloLAk4OHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaSCjw/+LUcMsAtjsdjP/GojqxI3FwK5R5e1vLmg+3lD
 TvWbVH23DqASvMhuar9N1Z+yiBWVuU6qa7eElqgOUUopo0Wlyf/93drqwKhqmFgH
 PVYxa3zKu7otU7SghfBVvpivAtvTlsyUVKnSXfL4DQQwXlqvdToQj3+J4eckiqVP
 u02fxn+h7lviLdRFhB+5JAJIK5nupcol1GIxbHwtELBCeoMAXjTbXTz5QToJizPp
 lMuzYLb1tvp7QrpYI5PgZ6YnAfA2GL7cCPMwdx63d8NYGtiWJd+iCtc/fM1WkElm
 8Py0yNvy1gHrjgQpku6Db1mhXNYYbu1qCKfLLMS4W8VOFkZughLNKLLqPQ+Eev5p
 PoHgGZLrCJk2W+vgF6nvoaw5AkZKKmKxzKYH9/gvvFkWrR1BW21XdLLRBm+TOahF
 Bj/c5t1k5WX4FVxotd78h3JVLY9Te+3re5Ak5cb0eGYE5+LHWX9tbObM7zfeZGv2
 5kw8cGTekcYkrKhh/HrORw8mEUFBRJfXfbUn+pIde6P56nJRa43JpE6JhXqstUpL
 n22DxUSIH8DWGkzWXGOmoOSFBolfcsOqTuws2QcT5oRfLnGikRCMii5UeLoW899i
 zlMmxfYSXOgjyWPXhvNROV5vEYNQZDiypjCoq0qbt+uy/mGne+L5ZFCbdJf4rIS/
 rKW4ILU=
 =BCBK
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are no big surprising changes in this cycle, yet not too boring,
  either. The biggest change from diffstat POV is the removal of the
  legacy OSS driver codes that have been already disabled for a long
  time. This will bring a few trivial merge conflicts.

  As new features in ASoC side, there are two things: a new AC97 bus
  implementation and AMD Stony platform support. Both include the
  relevant changes shared with other subsystems, e.g. AC97 MFD changes
  and DRM AMD changes.

  Some other highlighted topics are:

   - A bunch of USB-audio drivers got the hardening against the
     malicious device accesses with a new helper code for endpoint
     sanity check

   - Lots of cleanups for ASoC Intel platform code, including support
     for their open source audio firmware

   - Continued ASoC core componentization works

   - Support for scaling MCLK with sample rate in ASoC simple-card

   - Stabler PCM hot-unplug capability, especially for ASoC usages"

* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
  Documentation: sound: hd-audio: notes.rst
  ASoC: bcm2835: Support left/right justified and DSP modes
  ASoC: bcm2835: Enforce full symmetry
  ASoC: bcm2835: Support additional samplerates up to 384kHz
  ASoC: bcm2835: Add support for TDM modes
  ASoC: add mclk-fs support to audio graph card
  ASoC: add mclk-fs to audio graph card binding
  ASoC: rt5514: work around link error
  ASoC: rt5514: mark PM functions as __maybe_unused
  ASoC: rt5663: Check the JD status in the button pushing
  ASoC: amd: Modified DMA transfer Mechanism for Playback
  ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
  ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
  ASoC: da7213: add support for DSP modes
  ASoC: sun8i-codec: Add a comment on the LRCK inversion
  ASoC: sun8i-codec: Set the BCLK divider
  ASoC: rt5663: Delay and retry reading rt5663 ID register
  ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
  ASoC: cs42l56: Fix reset GPIO name in example DT binding
  ASoC: rt5514-spi: check irq status to schedule data copy in resume function
  ...
2017-11-14 18:01:46 -08:00
Linus Torvalds 449fcf3ab0 Staging/IIO patches for 4.15-rc1
Here is the "big" staging and IIO driver update for 4.15-rc1.
 
 Lots and lots of little changes, almost all minor code cleanups as the
 Outreachy application process happened during this development cycle.
 Also happened was a lot of IIO driver activity, and the typec USB code
 moving out of staging to drivers/usb (same commits are in the USB tree
 on a persistent branch to not cause merge issues.)
 
 Overall, it's a wash, I think we added a few hundred more lines than
 removed, but really only a few thousand were modified at all.
 
 All of these have been in linux-next for a while.  There might be a
 merge issue with Al's vfs tree in the pi433 driver (take his changes,
 they are always better), and the media tree with some of the odd atomisp
 cleanups (take the media tree's version).
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt
 g3ioPBqmqC/2DSbldr2o
 =/ebw
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...
2017-11-13 20:53:28 -08:00
Linus Torvalds 2bcc673101 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...
2017-11-13 17:56:58 -08:00
Dmitry Torokhov c25141062a Merge branch 'next' into for-linus
Prepare input updates for 4.15 merge window.
2017-11-13 17:10:13 -08:00
Linus Torvalds 43ff2f4db9 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
 "The main changes in this cycle were:

   - a refactoring of the early virt init code by merging 'struct
     x86_hyper' into 'struct x86_platform' and 'struct x86_init', which
     allows simplifications and also the addition of a new
     ->guest_late_init() callback. (Juergen Gross)

   - timer_setup() conversion of the UV code (Kees Cook)"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/virt/xen: Use guest_late_init to detect Xen PVH guest
  x86/virt, x86/platform: Add ->guest_late_init() callback to hypervisor_x86 structure
  x86/virt, x86/acpi: Add test for ACPI_FADT_NO_VGA
  x86/virt: Add enum for hypervisors to replace x86_hyper
  x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init'
  x86/platform/UV: Convert timers to use timer_setup()
2017-11-13 17:04:36 -08:00
Linus Torvalds 8e9a2dba86 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle are:

   - Another attempt at enabling cross-release lockdep dependency
     tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
     with better performance and fewer false positives. (Byungchul Park)

   - Introduce lockdep_assert_irqs_enabled()/disabled() and convert
     open-coded equivalents to lockdep variants. (Frederic Weisbecker)

   - Add down_read_killable() and use it in the VFS's iterate_dir()
     method. (Kirill Tkhai)

   - Convert remaining uses of ACCESS_ONCE() to
     READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
     driven. (Mark Rutland, Paul E. McKenney)

   - Get rid of lockless_dereference(), by strengthening Alpha atomics,
     strengthening READ_ONCE() with smp_read_barrier_depends() and thus
     being able to convert users of lockless_dereference() to
     READ_ONCE(). (Will Deacon)

   - Various micro-optimizations:

        - better PV qspinlocks (Waiman Long),
        - better x86 barriers (Michael S. Tsirkin)
        - better x86 refcounts (Kees Cook)

   - ... plus other fixes and enhancements. (Borislav Petkov, Juergen
     Gross, Miguel Bernal Marin)"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
  rcu: Use lockdep to assert IRQs are disabled/enabled
  netpoll: Use lockdep to assert IRQs are disabled/enabled
  timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
  sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
  irq_work: Use lockdep to assert IRQs are disabled/enabled
  irq/timings: Use lockdep to assert IRQs are disabled/enabled
  perf/core: Use lockdep to assert IRQs are disabled/enabled
  x86: Use lockdep to assert IRQs are disabled/enabled
  smp/core: Use lockdep to assert IRQs are disabled/enabled
  timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
  timers/nohz: Use lockdep to assert IRQs are disabled/enabled
  workqueue: Use lockdep to assert IRQs are disabled/enabled
  irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
  locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
  locking/pvqspinlock: Implement hybrid PV queued/unfair locks
  locking/rwlocks: Fix comments
  x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
  block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
  workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
  ...
2017-11-13 12:38:26 -08:00
Linus Torvalds 60cfc98b24 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov:

 - a new ACPI ID for Elan touchpad found in yet another Ideapad model

 - Synaptics RMI4 will allow binding to controllers reporting SMB
   version 3 (note that we are not adding any new ACPI IDs to the
   Synaptics PS/2 drover so unless user explicitly enables intertouch
   support there is no user-visible change)

 - a fixup to TSC 2004/5 touchscreen driver to mark input devices as
   "direct" to help userspace identify the type of device they are
   dealing with

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3
  Input: tsc200x-core - set INPUT_PROP_DIRECT
  Input: elan_i2c - add ELAN060C to the ACPI table
2017-11-10 14:14:23 -08:00
Mark Brown 242f66c845
Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ac97-mfd', 'asoc/topic/amd' and 'asoc/topic/arizona-mfd' into asoc-next 2017-11-10 21:31:02 +00:00
Gustavo A. R. Silva c1b433e04e Input: gamecon - mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114761
Addresses-Coverity-ID: 114762
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-10 10:29:55 -08:00
Gustavo A. R. Silva 56c78bb32b Input: sidewinder - mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114763
Addresses-Coverity-ID: 114764
Addresses-Coverity-ID: 114765
Addresses-Coverity-ID: 114766
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-10 10:29:55 -08:00
Gustavo A. R. Silva 005161c864 Input: spaceball - mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114767
Addresses-Coverity-ID: 114768
Addresses-Coverity-ID: 114769
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-10 10:29:54 -08:00
Dan Carpenter 781f2dd0a5 Input: uinput - unlock on allocation failure in ioctl
We have to unlock before returning if input_allocate_device() fails.

Fixes: 04ce40a61a ("Input: uinput - remove uinput_allocate_device()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-10 10:29:53 -08:00
Andi Shyti 0145a7141e Input: add support for the Samsung S6SY761 touchscreen
The S6SY761 touchscreen is a capicitive multi-touch controller
for mobile use. It's connected with i2c at the address 0x48.

This commit provides a basic version of the driver which can
handle only initialization, touch events and power states.

The controller is controlled by a firmware which, in the version
I currently have, doesn't provide all the possible
functionalities mentioned in the datasheet.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-10 10:18:23 -08:00
Anthony Kim 842ff28616 Input: add support for HiDeep touchscreen
The HiDeep touchscreen device is a capacitive multi-touch controller
mainly for multi-touch supported devices use. It use I2C interface for
communication to IC and provide axis X, Y, Z locations for ten finger
touch through input event interface to userspace.

It support the Crimson and the Lime two type IC. They are different
the number of channel supported and FW size. But the working protocol
is same.

Signed-off-by: Anthony Kim <anthony.kim@hideep.com>
Acked-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-10 10:18:22 -08:00
Juergen Gross 03b2a320b1 x86/virt: Add enum for hypervisors to replace x86_hyper
The x86_hyper pointer is only used for checking whether a virtual
device is supporting the hypervisor the system is running on.

Use an enum for that purpose instead and drop the x86_hyper pointer.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Xavier Deguillard <xdeguillard@vmware.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: akataria@vmware.com
Cc: arnd@arndb.de
Cc: boris.ostrovsky@oracle.com
Cc: devel@linuxdriverproject.org
Cc: dmitry.torokhov@gmail.com
Cc: gregkh@linuxfoundation.org
Cc: haiyangz@microsoft.com
Cc: kvm@vger.kernel.org
Cc: kys@microsoft.com
Cc: linux-graphics-maintainer@vmware.com
Cc: linux-input@vger.kernel.org
Cc: moltmann@vmware.com
Cc: pbonzini@redhat.com
Cc: pv-drivers@vmware.com
Cc: rkrcmar@redhat.com
Cc: sthemmin@microsoft.com
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20171109132739.23465-3-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-10 10:03:12 +01:00
Geert Uytterhoeven 4a1a57df97 Input: st1232 - remove obsolete platform device support
Commit 1fa59bda21 ("ARM: shmobile: Remove legacy board code for
Armadillo-800 EVA"), removed the last user of st1232_pdata and the
"st1232-ts" platform device.  All remaining users use DT.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-07 18:13:42 -08:00
Dmitry Torokhov 0f1cd81d4a Linux 4.14-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZ/30WAAoJEHm+PkMAQRiG1YkIAIVgcZS9SPzjcH+/NpcNJ4wv
 Bp8xyfj/X6Eswn63ebrV/qij65Esmha7wnSREcFqrfNecRwOAdvYCjj20jqKGws2
 p03sOS4aVSpJSQcqJ9sdF3Xx/P7CcK4IAjr0ihQbqozXiZAgVzTlYJwB+ErBMWFU
 6NFYXg/Xp7FJXJ0o14yHpZ4RqgbLV95CgFIG9hzwvCibsW6ZBvGtYBD99IjeojPg
 rw+B+Osck7XjC6IHqF/u760nTOaP8vVlTrCRqvFityGS9ZFQZDzEKYqxYgk8cVFC
 jzR3fuHiWiomhyP9dLUZn6UuYQTaThhY58LvsEwV0JVJH9mUwcA4u5nO0wDUCO4=
 =hhQa
 -----END PGP SIGNATURE-----

Merge tag 'v4.14-rc8' into next

Merge with mainline to bring in SPDX markings to avoid annoying merge
problems when some header files get deleted.
2017-11-07 18:11:56 -08:00
Yiannis Marangos 26dd633e43 Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3
Some Synaptics devices, such as LEN0073, use SMBUS version 3.

Signed-off-by: Yiannis Marangos <yiannis.marangos@gmail.com>
Acked-by: Benjamin Tissoires <benjamion.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-07 17:45:07 -08:00
Martin Kepplinger eca253912f Input: tsc200x-core - set INPUT_PROP_DIRECT
If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old
ways of identifying touchscreen devices.

In order to identify a touchscreen device, Android for example, seems to
already depend on INPUT_PROP_DIRECT to be present in drivers. udev still
checks for either BTN_TOUCH or INPUT_PROP_DIRECT. Checking for BTN_TOUCH
however can quite easily lead to false positives; it's a code that not only
touchscreen device drivers use.

According to the documentation, touchscreen drivers should have this
property set and in order to make life easy for userspace, let's set it.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-07 17:44:56 -08:00
Kai-Heng Feng cdea6a30c2 Input: elan_i2c - add ELAN060C to the ACPI table
ELAN060C touchpad uses elan_i2c as its driver. It can be
found on Lenovo ideapad 320-14AST.

BugLink: https://bugs.launchpad.net/bugs/1727544
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-07 17:44:40 -08:00
Ingo Molnar 8c5db92a70 Merge branch 'linus' into locking/core, to resolve conflicts
Conflicts:
	include/linux/compiler-clang.h
	include/linux/compiler-gcc.h
	include/linux/compiler-intel.h
	include/uapi/linux/stddef.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:32:44 +01:00
Linus Torvalds e50f82f809 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Just a couple of fixups to the sparse-keymap module and the Microchip
  AR1021 touchscreen driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sparse-keymap - send sync event for KE_SW/KE_VSW
  Input: ar1021_i2c - set INPUT_PROP_DIRECT
2017-11-03 18:10:23 -07:00
Stefan Brüns 6f29c24407 Input: sparse-keymap - send sync event for KE_SW/KE_VSW
Sync events are sent by sparse_keymap_report_entry for normal KEY_*
events, and are generated by several drivers after generating
SW_* events, so sparse_keymap_report_entry should do the same.

Without the sync, events are accumulated in the kernel.

Currently, no driver uses sparse-keymap for SW_* events, but
it is required for the intel-vbtn platform driver to generate
SW_TABLET_MODE events.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-03 12:47:48 -07:00
Martin Kepplinger 53f0b7f0df Input: ar1021_i2c - set INPUT_PROP_DIRECT
If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old
ways of identifying touchscreen devices. Let's add it.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-03 12:47:33 -07:00
Kees Cook 4e974c1200 Input: convert autorepeat timer to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-03 12:45:23 -07:00
Vince Kim a2c714e8cb Input: cyttsp4 - avoid overflows when calculating memory sizes
There are several places to perform subtraction to calculate buffer
size such as:

si->si_ofs.cydata_size = si->si_ofs.test_ofs - si->si_ofs.cydata_ofs;
...
p = krealloc(si->si_ptrs.cydata, si->si_ofs.cydata_size, GFP_KERNEL);

Actually, data types of above variables during subtraction are size_t, so
it is unsigned. That means if second operand(si->si_ofs.cydata_ofs) is
greater than the first operand(si->si_ofs.test_ofs), then resulting
si->si_ofs.cydata_size could result in an unsigned integer wrap which is
not desirable.

The proper way to correct this problem is to perform a test of both
operands to avoid having unsigned wrap.

Signed-off-by: Vince Kim <vince.k.kim@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-03 12:45:22 -07:00
Linus Torvalds ead751507d License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds a7d3e63f84 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:

 - fix gtco tablet driver, tightening parsing of HID descriptors

 - add ACPI ID added to Elan driver to be able to handle touchpads found
   in Lenovo Ideapad 320/520

 - fix the Symaptics RMI4 driver to adjust handling of buttons

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - limit the range of what GPIOs are buttons
  Input: gtco - fix potential out-of-bound access
  Input: elan_i2c - add ELAN0611 to the ACPI table
2017-10-28 10:56:13 -07:00
Colin Ian King 11772c9c18 Input: mxs-lradc - remove redundant assignment to pointer input
The pointer 'input' is being initialized with ts->ts_input and this
value is not being read as it is updated a few lines later with the
return value from the call to devm_input_allocate_device. Remove the
redundant initialization assignment.  Cleans up clang warning:

drivers/input/touchscreen/mxs-lradc-ts.c:587:20: warning: Value Xi
stored to 'input' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-27 15:48:00 -07:00
Andrew Duggan 3e64fcbdbd Input: synaptics-rmi4 - limit the range of what GPIOs are buttons
By convention the first 6 bits of F30 Ctrl 2 and 3 are used to signify
GPIOs which are connected to buttons. Additional GPIOs may be used as
input GPIOs to signal the touch controller of some event
(ie disable touchpad). These additional GPIOs may meet the criteria of
a button in rmi_f30_is_valid_button() but should not be considered
buttons. This patch limits the GPIOs which are mapped to buttons to just
the first 6.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Daniel Martin <consume.noise@gmail.com>
Tested-by: Daniel Martin <consume.noise@gmail.com>
Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-27 15:15:59 -07:00
Dmitry Torokhov a50829479f Input: gtco - fix potential out-of-bound access
parse_hid_report_descriptor() has a while (i < length) loop, which
only guarantees that there's at least 1 byte in the buffer, but the
loop body can read multiple bytes which causes out-of-bounds access.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-27 15:14:41 -07:00
Ahmet Inan 7e577a17f2 Input: add I2C attached EETI EXC3000 multi touch driver
The 3000 series have a new protocol which allows to report up to 5 points
in a single 66 byte frame. One must always read in 66 byte frames.
To support up to 10 points, two consecutive frames need to be read:
The first frame says how many points until sync.
The second frame must say zero points or both frames must be discarded.

To be able to work with the higher 400KHz I2C bus rate, one must
successfully send a special package prior _each_ read or the controller
will refuse to cooperate.

This is a minimal implementation based on egalax_i2c.c (which can be found
on the internet) and egalax_ts.c but without the vendor interface and no
power management support.

Signed-off-by: Ahmet Inan <inan@distec.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-25 14:55:33 -07:00
Mark Rutland 6aa7de0591 locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25 11:01:08 +02:00
Marcin Niestroj 25309004c0 Input: goodix - support gt1151 touchpanel
Support was added based on Goodix GitHub repo [1]. There are two major
differences between gt1151 and currently supported devices (gt9x):
 * CONFIG_DATA register has 0x8050 address instead of 0x8047,
 * config data checksum has 16-bit width instead of 8-bit.

Also update goodix_i2c_test() function, so it reads ID register (which
has the same address for all devices) instead of CONFIG_DATA (because
its address is known only after reading ID of the device).

[1] https://github.com/goodix/gt1x_driver_generic

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-24 11:58:19 -07:00
Kai-Heng Feng 57a95b4186 Input: elan_i2c - add ELAN0611 to the ACPI table
ELAN0611 touchpad uses elan_i2c as its driver. It can be found
on Lenovo ideapad 320-15IKB.

So add it to ACPI table to enable the touchpad.

[Ido Adiv <idoad123@gmail.com> reports that the same ACPI ID is used for
Elan touchpad in ideapad 520].

BugLink: https://bugs.launchpad.net/bugs/1723736
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-24 11:54:08 -07:00
Dmitry Torokhov 6a3eafe490 Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs
We've been missing a goto to the unwind path...

Acked-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-24 10:10:11 -07:00
Kees Cook ded489d43f Input: hil_mlc - convert to using timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-24 10:09:51 -07:00
Kees Cook a4f60b5047 Input: hp_sdc - convert to using timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-24 10:09:46 -07:00
Kees Cook ee03e3f005 Input: touchsceen - convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-24 10:09:33 -07:00
Kees Cook 4ea40278eb Input: keyboard - convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-24 10:04:44 -07:00
Dmitry Torokhov a11bc476b9 Input: uinput - fold header into the driver proper
There is nothing in the uinput kernel header that is of use to anyone in
the kernel besides the uinput driver itself, so let's fold it into the
driver code (leaving uapi part intact).

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:32:31 -07:00
Dmitry Torokhov 04ce40a61a Input: uinput - remove uinput_allocate_device()
There is no need for this wrapper; let's use input_allocate_device()
directly, and complete initialization in uinput_create_device().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:32:30 -07:00
Dmitry Torokhov c06616528f Input: uinput - fix coding style in uinput_ioctl_handler()
"case"s in switch statement were indented extra level, let's fix that.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:32:30 -07:00
Dmitry Torokhov 8e009118a4 Input: uinput - allow FF requests to time out
Previously uinput force feedback requests waited for the userspace
indefinitely, which caused users to block when uinput server process
become unresponsive. Let's establish a 30 seconds deadline for servicing
upload and erase force feedback effect actions, so that users have a
chance to abort stuck requests.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:32:29 -07:00
stephen lu 8446b32b06 Input: ad7877 - convert to using timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Stephen Lu <lumotuwe@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:31:56 -07:00
stephen lu 82565a1205 Input: gpio-keys - convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Stephen Lu <lumotuwe@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:31:53 -07:00
Kees Cook 34445d4b38 Input: ff_memless - convert to using timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:31:52 -07:00
Kees Cook 17a58edc79 Input: alps - convert to using timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:31:50 -07:00
Kees Cook ce23cbc857 Input: byd - convert to using timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-23 16:31:43 -07:00
Dmitry Torokhov 91de76e661 Linux 4.14-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZ7clWAAoJEHm+PkMAQRiG07AH/iKcej+AsurISHx6i/LUEDC1
 a9wo5HAR5kEj+ohdE3JSkD9BHLcyhcCXaqIk9yOrwi9xv1DrPv8U/nGkKzZJzFi2
 mGWK09Zgi+vgSpA+YSErgl05IVGtgaryQQPqQdawpyRpqTUwP0+2pLnKEnJe0f05
 fpv+S4bDKUCuE8GcVNjF9gxXDg8j60fFa+oAcn7QPS6dCun/H6TbDRue5oeky0Y+
 50ZYjjioy9S9DIm2VF7pktMCP/mK/fgb+Q+4Up09VJGHGhq+891SRJ27yDulxo47
 /gq22SRIGBX2PGNllSwhYslgaCRRlYTMBYOIWrBreanA4NpGD662dp+GgWhD154=
 =TAMw
 -----END PGP SIGNATURE-----

Merge tag 'v4.14-rc6' into next

Merge with mainline to bring in the timer API changes.
2017-10-23 11:43:40 -07:00
Greg Kroah-Hartman 7706abf5a0 Merge 4.14-rc6 into staging-next
We want the IIO and staging driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23 14:29:43 +02:00
Linus Torvalds e5f468b3f2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:

 - joydev now implements a blacklist to avoid creating joystick nodes
   for accelerometers found in composite devices such as PlaStation
   controllers

 - assorted driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ims-psu - check if CDC union descriptor is sane
  Input: joydev - blacklist ds3/ds4/udraw motion sensors
  Input: allow matching device IDs on property bits
  Input: factor out and export input_device_id matching code
  Input: goodix - poll the 'buffer status' bit before reading data
  Input: axp20x-pek - fix module not auto-loading for axp221 pek
  Input: tca8418 - enable interrupt after it has been requested
  Input: stmfts - fix setting ABS_MT_POSITION_* maximum size
  Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen
  Input: synaptics - disable kernel tracking on SMBus devices
2017-10-21 21:46:39 -04:00
Dmitry Torokhov ea04efee76 Input: ims-psu - check if CDC union descriptor is sane
Before trying to use CDC union descriptor, try to validate whether that it
is sane by checking that intf->altsetting->extra is big enough and that
descriptor bLength is not too big and not too small.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:20:06 -07:00
Simon Budig aed5d0ee77 Input: edt-ft5x06 - implement support for the EDT-M12 series
This adds support for the EDT M12 series of touchscreens.

Signed-off-by: Simon Budig <simon.budig@kernelconcepts.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:17:47 -07:00
Simon Budig 169110c364 Input: edt-ft5x06 - make distinction between m06/m09/generic more clear
Since the driver also is useful for some non-EDT touchscreens based on
the focaltec chips introduce the concept of a "generic" focaltec based
touch.

Use a better heuristics for model detection and be more specific in the
source.

Signed-off-by: Simon Budig <simon.budig@kernelconcepts.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:17:46 -07:00
Linus Walleij adb77b3e51 Input: gpio_mouse - add device tree probing
This makes the GPIO mouse probe nicely from the device tree if found in a
tree. As the driver uses device properties it can easily be amended to also
probe from ACPI devices.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:46 -07:00
Linus Walleij 836bd41983 Input: gpio_mouse - convert to use GPIO descriptors
This converts the GPIO mouse to use descriptors and fwnode properties. The
polarity settings go out the window since GPIO descriptor already know
about polarity so this should be configured in device tree or ACPI or
similar.

Set scanning interval by default to 50ms if not found as a property on the
device.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:46 -07:00
Linus Walleij 34cf5a1cad Input: gpio_mouse - rename platform data variables
Use more appropriate names for the "platform data" which is now just a
simple state container for the GPIO mouse.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:44 -07:00
Linus Walleij c5053e695d Input: gpio_mouse - kill off platform data
This is not used much: git grep  gpio_mouse_platform_data shows
that absolutely nothing in the kernel defines this platform
data.

It could be argued that the driver should be deleted. But that
is a bit harsh I think since it seems generally useful. So
this patch starts a series which repurposes it to be used with
hardware nodes from device tree or ACPI.

This first patch simply localize the platform data header and
allocates a dummy platform data.

Yes: this patch leaves the driver in a pretty useless state,
but since nothing is instantiating this driver, it doesn't
make it more useless than it already is. Later patches makes
use of the driver.

Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 17:08:37 -07:00
Roderick Colenbrander 20ac95d52a Input: joydev - blacklist ds3/ds4/udraw motion sensors
Introduce a device table used for blacklisting devices. We currently
blacklist the motion sensor subdevice of THQ Udraw and Sony ds3/ds4.

Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
[dtor: siwtched to blacklist built on input_device_id and using
input_match_device_id()]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:55:39 -07:00
Dmitry Torokhov 8724ecb072 Input: allow matching device IDs on property bits
Let's allow matching input devices on their property bits, both in-kernel
and when generating module aliases.

Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:54:49 -07:00
Dmitry Torokhov 55dfce873d Input: factor out and export input_device_id matching code
Factor out and export input_match_device_id() so that modules may use it.
It will be needed by joydev to blacklist accelerometers in composite
devices.

Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:53:34 -07:00
Paul Cercueil 9b5db7aab4 Input: goodix - poll the 'buffer status' bit before reading data
The Goodix panel triggers an interrupt on touch events. However, its
registers will contain the valid values a short time after the
interrupt, and not when it's raised. At that moment, the 'buffer status'
bit is set.

Previously, if the 'buffer status' bit was not set when the registers
were read, the data was discarded and no input event was emitted,
causing "finger down" or "finger up" events to be missed sometimes.

This went unnoticed until v4.9, as the DesignWare I2C driver commonly
used with this driver had enough latency for that bug to never trigger
until commit 2702ea7dbe ("i2c: designware: wait for disable/enable only
if necessary").

Now, in the IRQ handler we will poll (with a timeout) the 'buffer status'
bit and process the data of the panel as soon as this bit gets set.

Note that the Goodix panel will send a few spurious interrupts after the
'finger up' event, in which the 'buffer status' bit will never be set.

Cc: Bastien Nocera <hadess@hadess.net>
Cc: russianneuromancer@ya.ru
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[hdegoede@redhat.com: Change poll loop to use jiffies,
                      add comment about typical poll time]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[dtor: rearranged control flow a bit to avoid explicit goto and double
check]
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:50:39 -07:00
Hans de Goede 481c209fa0 Input: axp20x-pek - fix module not auto-loading for axp221 pek
Now that we have a platform_device_id table and multiple supported ids
we should be using MODULE_DEVICE_TABLE instead of MODULE_ALIAS.

This fixes a regression on Bay and Cherry Trail devices, where the power
button is now enumerated as an "axp221-pek" and it was impossible to
wakeup these devices from suspend since the module did not load.

Fixes: c3cc94470b ("Input: axp20x-pek - add support for AXP221 PEK")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:50:28 -07:00
Damien Riegel 8f75bc3377 Input: tca8418 - enable interrupt after it has been requested
Currently, enabling keypad interrupts is one of the first operations
done on the keypad, even before the interrupt is requested, so there is
a small time window where the keypad can fire interrupts but the driver
is not yet ready to handle them. It's fine for level interrupts because
they will be handled anyway, but not so much for edge ones.

This commit modifies and moves the function in charge of configuring the
keypad. Enabling interrupts is now the last thing done on the keypad,
and after the interrupt has been requested by the driver.

Writing to the config register was also used to determine if the device
was indeed present on the bus or not, this has been replaced by reading
the lock/event count register to keep the same functionality.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:50:20 -07:00
Chanwoo Choi c9bfb2f003 Input: stmfts - fix setting ABS_MT_POSITION_* maximum size
The commit 78bcac7b2a ("Input: add support for the STMicroelectronics
FingerTip touchscreen) used the 'touchscreen_parse_properties()' helper
function in order to get the value of common properties.

But, commit 78bcac7b2a didn't set the capability of ABS_MT_POSITION_*
before calling touchscreen_parse_properties(). In result, the max_x and
max_y of 'struct touchscreen_properties' were not set.

Fixes: 78bcac7b2a ("Input: add support for the STMicroelectronics FingerTip touchscreen")
Cc: stable@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-18 17:54:13 -07:00
Jeff Lance cf5dd48907 Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen
Step config setting for 5 wire touchscreen is incorrect for Y coordinates.
It was broken while we moved to DT. If you look close at the offending
commit bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made
configurable"), the change was:

- STEPCONFIG_XNP | STEPCONFIG_YPN;
+ ts_dev->bit_xn | ts_dev->bit_yp;

while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the
same.

Fixes: bb76dc09dd ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Signed-off-by: Jeff Lance <j-lance1@ti.com>
[vigneshr@ti.com: Rebase to v4.14-rc1]
Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-18 17:54:12 -07:00
Colin Ian King 60942e674e Input: synaptics-rmi4 - make array rmi_f54_report_type_names static
The array rmi_f54_report_type_names is local to the source and does
not need to be in global scope, so make it static. Also make the array
const char * const.

Cleans up sparse warning:
symbol 'rmi_f54_report_type_names' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-09 20:53:36 -07:00
Andrew Duggan 2b30297d48 Input: synaptics - disable kernel tracking on SMBus devices
In certain situations kernel tracking seems to be getting confused
and incorrectly reporting the slot of a contact. On example is when
the user does a three finger click or tap and then places two fingers
on the touchpad in the same area. The kernel tracking code seems to
continue to think that there are three contacts on the touchpad and
incorrectly alternates the slot of one of the contacts. The result that
is the input subsystem reports a stream of button press and release
events as the reported slot changes.

Kernel tracking was originally enabled to prevent cursor jumps, but it
is unclear how much of an issue kernel jumps actually are. This patch
simply disabled kernel tracking for now.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1482640

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Tested-by: Kamil Páral <kparal@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-09 20:52:39 -07:00
Greg Kroah-Hartman 1236d6bb6e Merge 4.14-rc4 into staging-next
We want the staging/iio fixes in here as well to handle merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-09 09:02:35 +02:00
Kees Cook 1d27e3e225 timer: Remove expires and data arguments from DEFINE_TIMER
Drop the arguments from the macro and adjust all callers with the
following script:

  perl -pi -e 's/DEFINE_TIMER\((.*), 0, 0\);/DEFINE_TIMER($1);/g;' \
    $(git grep DEFINE_TIMER | cut -d: -f1 | sort -u | grep -v timer.h)

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # for m68k parts
Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog parts
Acked-by: David S. Miller <davem@davemloft.net> # for networking parts
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org> # for wireless parts
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: Petr Mladek <pmladek@suse.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: linux1394-devel@lists.sourceforge.net
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-s390@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ursula Braun <ubraun@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Harish Patil <harish.patil@cavium.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Reed <mdr@sgi.com>
Cc: Manish Chopra <manish.chopra@cavium.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-pm@vger.kernel.org
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mark Gross <mark.gross@intel.com>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: netdev@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lkml.kernel.org/r/1507159627-127660-11-git-send-email-keescook@chromium.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-10-05 15:01:20 +02:00
Andi Shyti a8b4aa0c0d Input: ad7879 - use managed devm_device_add_group
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.

Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29 16:51:07 -07:00
Andi Shyti e3adf559a3 Input: edt-ft5x06 - use managed devm_device_add_group
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.

Use devm_device_add_group instead of sysfs_create_group and remove the
relative sysfs_remove_group and goto label.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29 16:51:06 -07:00
Andi Shyti 5f2ae04991 Input: wdt87xx_i2c - use managed devm_device_add_group
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.

Use devm_device_add_group instead of sysfs_create_group and remove the
relative sysfs_remove_group.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29 16:51:05 -07:00
Andi Shyti a71b8b5c4a Input: rohm_bu21023 - use managed devm_device_add_group
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.

Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29 16:51:04 -07:00
Andi Shyti b887df52f8 Input: raydium_i2c_ts - use managed devm_device_add_group
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.

Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29 16:51:04 -07:00
Andi Shyti 4c16f82e23 Input: melfas_mip4 - use managed devm_device_add_group
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.

Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29 16:51:03 -07:00
Andi Shyti 8db69a9a5d Input: elants_i2c - use managed devm_device_add_group
Commit 57b8ff070f ("driver core: add devm_device_add_group() and
friends") has added the managed version for creating sysfs group files.

Use devm_device_add_group instead of sysfs_create_group and remove the
action that cleans the sysfs file when exiting the driver.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29 16:51:02 -07:00
Dmitry Torokhov a4b0a58bb1 Input: elan_i2c - do not clobber interrupt trigger on x86
On x86 we historically used falling edge interrupts in the driver
because that's how first Chrome devices were configured. They also
did not use ACPI to enumerate I2C devices (because back then there
was no kernel support for that), so trigger was hard-coded in the
driver. However the controller behavior is much more reliable if
we use level triggers, and that is how we configured ARM devices,
and how want to configure newer x86 devices as well. All newer
x86 boxes have their I2C devices enumerated in ACPI.

Let's see if platform code (ACPI, DT) described interrupt and
specified particular trigger type, and if so, let's use it instead
of always clobbering trigger with IRQF_TRIGGER_FALLING. We will
still use this trigger type as a fallback if platform code left
interrupt trigger unconfigured.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196761
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-29 16:51:01 -07:00
Randy Dunlap 8d25fee284 Input: usbtouchscreen - use EXPERT instead of EMBEDDED for EasyTouch
Change control of TOUCHSCREEN_USB_EASYTOUCH prompt string from
EMBEDDED to EXPERT to match the rest of this Kconfig file.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-26 11:52:09 -07:00
Russell King 361fa055f1 Input: sa1111ps2 - extend test delay
A 2us delay is too small for the bus to settle after writing to the
register.  Extend to 10us which gives more reliable results.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-26 11:52:08 -07:00
Russell King a12ded48b3 Input: sa1111ps2 - remove special sa1111 mmio accessors
Remove the special SA1111 MMIO accessors from the SA1111 PS/2 driver
as their definition will be removed shortly.  The SA1111 accessors are
barrierless, so use the _relaxed variants.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-26 11:52:07 -07:00
Russell King e6c4436876 Input: sa1111ps2 - use sa1111_get_irq() to obtain IRQ resources
Use the provided sa1111_get_irq() to fetch the IRQ resources for the
SA1111 PS/2 driver.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-26 11:52:00 -07:00
Greg Kroah-Hartman 069f0e0c06 Round one of new device support, features and cleanup for IIO in the 4.15 cycle.
Note there is a misc driver drop in here given we have support
 in IIO and the feeling is no one will care.
 
 A large part of this series is a boiler plate removal series avoiding
 the need to explicitly provide THIS_MODULE in various locations.
 It's very dull but touches all drivers.
 
 New device support
 * ad5446
   - add ids to support compatible parts DAC081S101, DAC101S101,
     DAC121S101.
   - add the dac7512 id and drop the misc driver as feeling is no
     one is using it (was introduced for a board that is long obsolete)
 * mt6577
   - add bindings for mt2712 which is fully compatible with other
     supported parts.
 * st_pressure
   - add support for LPS33HW and LPS35HW with bindings (ids mostly).
 
 New features
 * ccs811
   - Add support for the data ready trigger.
 * mma8452
   - remove artifical restriction on supporting multiple event types
     at the same time.
 * tcs3472
   - support out of threshold events
 
 Core and tree wide cleanup
 * Use macro magic to remove the need to provide THIS_MODULE as part of
   struct iio_info or struct iio_trigger_ops.  This is similar to
   work done in a number of other subsystems (e.g. i2c, spi).
 
   All drivers are fixed and then the fields in these structures are
   removed.
 
   This will cause build failures for out of tree drivers and any
   new drivers that cross with this work going into the kernel.
 
   Note mostly done with a coccinelle patch, included in the series
   on the mailing list but not merged as the fields no longer exist
   in the structures so the any hold outs will cause a build failure.
 
 Cleanups
 * ads1015
   - avoid writing config register when it doesn't change.
   - add 10% to conversion wait time as it seems it is sometimes
     a little small.
 * ade7753
   - replace use of core mlock with a local lock.  This is part of a
     long term effort to make the use of mlock opaque and single
     purpose.
 * ade7759
   - expand the use of buf_lock to cover previous mlock cases.  This
     is a slightly nicer solution to the same issue as in ade7753.
 * cros_ec
   - drop an unused variable
 * inv_mpu6050
   - add a missing break in a switch for consistency - not actual
     bug,
   - make some local arrays static to save on object code size.
 * max5481
   - drop manual setting of the spi module owner as handled by the
     spi core.
 * max5487
   - drop manual setting of the spi module owner as handled by the
     spi core.
 * max9611
   - drop explicit setting of the i2c module owner as handled by
     the i2c core.
 * mcp320x
   - speed up reads on single channel devices,
   - drop unused of_device_id data elements,
   - document the struct mcp320x,
   - improve binding docs to reflect restrictions on spi setup and
     to make it explicit that the reference regulator is needed.
 * mma8452
   - symbolic to octal permissions,
   - unsigned to unsigned int.
 * st_lsm6dsx
   - avoid setting odr values multiple times,
   - drop config of LIR as it is only ever set to the existing
     defaults,
   - drop rounding configuration as it only ever matches the defaults.
 * ti-ads8688
   - drop manual setting of the spi module owner as handled by the
     spi core.
 * tsl2x7x
   - constify the i2c_device_id,
   - cleanup limit checks to avoid static checker warnings (and generally
     have nicer code).
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlnH4XkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Fogkaw//e3z+4TQT2Hn+550lBYUV8pBR5emDiSe3
 0QTG+ZS7Kh+fPYENLCXtW9ttZicmUSqkTQFvlMTjAxHyj9XzL7+BXS9UlNgVLsqX
 pn9KprPj31lrXpJOXMSgcdiqWMZLtCvprAJgnwfZt1GevS3WbCMmnnoaBuJV61jp
 w0VD+forukTGF7b0OMGB0d5mwtYS0bJYqXRRMPD+2bNeM4hqt5YM3+wHSqP35t3l
 MoaqKlbx7ZtKDF4zIa59nKNP7Ky7IByWogLZRlJ/vD/uKrACckPT22+KT8rX2TwA
 NpZb1Oy/KZBTl5D9iRjZADq4NaRJENFXJiG6GkjoGjrQhUqHaCinHWpLioqLGlRq
 qCPL2nRjqm4Qr7E8sxlwR1Ajlg0utBMY7Oflym/XJMMLF/ZE6HSrzyrxuVMG2EjV
 T7SVIncbfg6kyr/r4kKsAT3BUMV+TdO4sXm+JgphZBUqZLp0nFHnmjP7Rm2j2uWq
 +yLrSuF25RijrRj3sp28zg9dFWlRwRvZvcAx8kEGm1kMjMWr+Q10xTK9o/5LlFEw
 57sUm6qgmigPK8sahDtcdLIwaCPVvAYvJ0e4Mfw5UsPSlZmHmM1mLwjpwiXBZ5ig
 oxnJmTXsn5RcOGiW/mg0VCH26NkBx7H0fsRqQeq9wkxHLrm75vXroIn7YqRIg+Ad
 /Itu6x6fOIg=
 =ik5C
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Round one of new device support, features and cleanup for IIO in the 4.15 cycle.

Note there is a misc driver drop in here given we have support
in IIO and the feeling is no one will care.

A large part of this series is a boiler plate removal series avoiding
the need to explicitly provide THIS_MODULE in various locations.
It's very dull but touches all drivers.

New device support
* ad5446
  - add ids to support compatible parts DAC081S101, DAC101S101,
    DAC121S101.
  - add the dac7512 id and drop the misc driver as feeling is no
    one is using it (was introduced for a board that is long obsolete)
* mt6577
  - add bindings for mt2712 which is fully compatible with other
    supported parts.
* st_pressure
  - add support for LPS33HW and LPS35HW with bindings (ids mostly).

New features
* ccs811
  - Add support for the data ready trigger.
* mma8452
  - remove artifical restriction on supporting multiple event types
    at the same time.
* tcs3472
  - support out of threshold events

Core and tree wide cleanup
* Use macro magic to remove the need to provide THIS_MODULE as part of
  struct iio_info or struct iio_trigger_ops.  This is similar to
  work done in a number of other subsystems (e.g. i2c, spi).

  All drivers are fixed and then the fields in these structures are
  removed.

  This will cause build failures for out of tree drivers and any
  new drivers that cross with this work going into the kernel.

  Note mostly done with a coccinelle patch, included in the series
  on the mailing list but not merged as the fields no longer exist
  in the structures so the any hold outs will cause a build failure.

Cleanups
* ads1015
  - avoid writing config register when it doesn't change.
  - add 10% to conversion wait time as it seems it is sometimes
    a little small.
* ade7753
  - replace use of core mlock with a local lock.  This is part of a
    long term effort to make the use of mlock opaque and single
    purpose.
* ade7759
  - expand the use of buf_lock to cover previous mlock cases.  This
    is a slightly nicer solution to the same issue as in ade7753.
* cros_ec
  - drop an unused variable
* inv_mpu6050
  - add a missing break in a switch for consistency - not actual
    bug,
  - make some local arrays static to save on object code size.
* max5481
  - drop manual setting of the spi module owner as handled by the
    spi core.
* max5487
  - drop manual setting of the spi module owner as handled by the
    spi core.
* max9611
  - drop explicit setting of the i2c module owner as handled by
    the i2c core.
* mcp320x
  - speed up reads on single channel devices,
  - drop unused of_device_id data elements,
  - document the struct mcp320x,
  - improve binding docs to reflect restrictions on spi setup and
    to make it explicit that the reference regulator is needed.
* mma8452
  - symbolic to octal permissions,
  - unsigned to unsigned int.
* st_lsm6dsx
  - avoid setting odr values multiple times,
  - drop config of LIR as it is only ever set to the existing
    defaults,
  - drop rounding configuration as it only ever matches the defaults.
* ti-ads8688
  - drop manual setting of the spi module owner as handled by the
    spi core.
* tsl2x7x
  - constify the i2c_device_id,
  - cleanup limit checks to avoid static checker warnings (and generally
    have nicer code).
2017-09-25 12:56:37 +02:00
Linus Torvalds d32e5f44a5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:

 - fixes for two long standing issues (lock up and a crash) in force
   feedback handling in uinput driver

 - tweak to firmware update timing in Elan I2C touchpad driver.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - extend Flash-Write delay
  Input: uinput - avoid crash when sending FF request to device going away
  Input: uinput - avoid FF flush when destroying device
2017-09-22 17:23:41 -10:00
KT Liao 05f5c38576 Input: elan_i2c - extend Flash-Write delay
The original 20ms delay is only marginally enough delay after a block write
operation during firmware update. Let's increase the delay to ensure that
the controller finishes up storing the page to avoid failures in the
firmware updates.

Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-22 10:07:38 -07:00
Andi Shyti c2690bd697 Input: stmfts - use devm_device_add_group
instead of sysfs_create_group.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-22 10:06:58 -07:00
Nik Nyby 7ed802c0c0 Input: elan_i2c - remove duplicate ELAN0605 id
ELAN0605 appears twice here.

Signed-off-by: Nik Nyby <nikolas@gnu.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21 16:42:23 -07:00
Dmitry Torokhov 9c4089e87a Immutable branch between MFD, Input and RTC due for the v3.14 merge window
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZkp3BAAoJEFGvii+H/Hdhtl8QAITZ/6R+aRQC8eFilvo9/9qv
 HTJVvEOZBa5afupmxQlNwuzFW5Zdou21Cl3Y0360hbRE0L3uOFGPBS4iBNIc9FLj
 cMFw4yuSVI98rLXZlmfSrRS/ZZuMbih0uu9/By7WDbgPOv86C8SrLt4DJln0ujjg
 4GmXbEzJlrULDvQQofaXtfVpfjTORjeiscgYVF4wv7rPYu9+4+wn3aXBi51I2gLb
 pkztJ0eAhyIAVxgPGldfa+1y4B1R3edJMfpFztHMVBaIg1aOkqcNC8Cs2MZpqxml
 jI3QpYFDw3q0iQ3UF8G1omcmGOItv2Jr2BGvJuyTApAe0mS47jlI+2djWlEWgHEd
 P3qhInsYX85xL4AYRUxnYxW7qmTq99DffvjHa2YzHMNw1c2q29ops+sVxvrsuHyw
 WBjBzKOXdzbDPdiVuaexP1jP/TPxw+V9l8hgkuqavONKwIN3aLeIRET1fZvO3eTG
 TeQgP37wJSC9uK4mSzcx32K9q1+XCYZCyPU9XZS+08Hq7Lxi3chqdfhRX6AUBCxW
 DiR1lOU1uIK8uZJHOpUDWuOiWIOWeWmkR82CXo88WivWiPW0MHXrfPPZMfxsOAa9
 /PAbobKpSXPZpD3mh1lm7x8f1mhgevZ9jlYVTu5LcVMnNSsLQP0r3p5ytGj7sMuz
 ltd2v7liFJ4CWOwpQPZu
 =j+Q1
 -----END PGP SIGNATURE-----

Merge tag 'ib-mfd-input-rtc-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge "Immutable branch between MFD, Input and RTC due for the v3.14
merge window" to have dm355evm_msp.h header moved into right place.
2017-09-21 16:41:15 -07:00
Dmitry Torokhov 95a0c7c2d6 Immutable branch between MFD and many other subsystems due for the v4.14 merge window
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZrVgvAAoJEFGvii+H/Hdhw9AP/04kewyz1WwobD+0SZsujELP
 768c92WNmMqux8OsRVUpjqcCsepi+W8ppM2tmV9jJ+rwb9SeT+cOxnaUPrlHMuK+
 zQyc4F4PRlyxfrFZ0tr/VrTHvhsmdmhEux34zMrdKggeShwHAkEQhNUFTEo3efKs
 J32H2BuDTcbnbiqz1Lg00NzIFOEhvpSsplgUQtz7NnG1y8T9U0kLupoXkNquIAj9
 SAP9LTNyUlPqlQ0Ku0S77Zr8R9K202T9xi1RGGoscYiM3421WJA/+4S9RTqfAVje
 atAOfS+nNnaxkeBYJT/wZ71zINdbhj0NKsGa/aah4hGIpbvuwouWPy+8PqyugKYy
 M6uBpjo1uk1gu+kYruzNXYmKLH+F8W8bTMNiovJ2bx4qP08FlB/4X+BCL9Hy00/Z
 btOz1cBTEjY2aUND84b2qZLkmGbH4VTGFS3TAr0TqsM2hQH8ThxP2f+tM7Hseupl
 SvaahUYXiqTNexErLQD/Oya6QKZgoJvUmboGGO65BQmdXeHXoA3hZBltp7+aEBb4
 IYG3eWwY5Shj3jpB16jDAioC43B4hHiLUWDGJtquFuscXJr5WkfeKMBg7PrY46Rh
 reHsYAMhLVmOUBe77NyAEyVjQcBtpHlpkETvsCjM3tP/GqWlHLR+1jhech3Ip3LA
 X7ODA7pC9iGSY2ePTiCj
 =nb+l
 -----END PGP SIGNATURE-----

Merge tag 'ib-mfd-many-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Merge "Immutable branch between MFD and many other subsystems due for
the v4.14 merge window" to get the TWL headers moved to the right place.
2017-09-21 16:38:09 -07:00
Dmitry Torokhov 6b4877c7bd Input: uinput - avoid crash when sending FF request to device going away
If FF request comes in while uinput device is going away,
uinput_request_send() will fail with -ENODEV, and uinput_request_submit()
will attempt to mark the slot as unused by calling uinput_request_done().
Unfortunately in this case we haven't initialized request->done completion
yet, and we get a crash:

[   39.402036] BUG: spinlock bad magic on CPU#1, fftest/3108
[   39.402046]  lock: 0xffff88006a93bb00, .magic: 00000000, .owner: /39, .owner_cpu: 1217155072
[   39.402055] CPU: 1 PID: 3108 Comm: fftest Tainted: G        W 4.13.0+ #15
[   39.402059] Hardware name: LENOVO 20HQS0EG02/20HQS0EG02, BIOS N1MET37W (1.22 ) 07/04/2017
[   39.402064]  0000000000000086 f0fad82f3ceaa120 ffff88006a93b9a0 ffffffff9de941bb
[   39.402077]  ffff88026df8ae00 ffff88006a93bb00 ffff88006a93b9c0 ffffffff9dca62b7
[   39.402088]  ffff88006a93bb00 ffff88006a93baf8 ffff88006a93b9e0 ffffffff9dca62e7
[   39.402099] Call Trace:
[   39.402112]  [<ffffffff9de941bb>] dump_stack+0x4d/0x63
[   39.402123]  [<ffffffff9dca62b7>] spin_dump+0x97/0x9c
[   39.402130]  [<ffffffff9dca62e7>] spin_bug+0x2b/0x2d
[   39.402138]  [<ffffffff9dca6373>] do_raw_spin_lock+0x28/0xfd
[   39.402147]  [<ffffffff9e3055cd>] _raw_spin_lock_irqsave+0x19/0x1f
[   39.402154]  [<ffffffff9dca05b7>] complete+0x1d/0x48
[   39.402162]  [<ffffffffc04f30af>] 0xffffffffc04f30af
[   39.402167]  [<ffffffffc04f468c>] 0xffffffffc04f468c
[   39.402177]  [<ffffffff9dd59c16>] ? __slab_free+0x22f/0x359
[   39.402184]  [<ffffffff9dcc13e9>] ? tk_clock_read+0xc/0xe
[   39.402189]  [<ffffffffc04f471f>] 0xffffffffc04f471f
[   39.402195]  [<ffffffff9dc9ffe5>] ? __wake_up+0x44/0x4b
[   39.402200]  [<ffffffffc04f3240>] ? 0xffffffffc04f3240
[   39.402207]  [<ffffffff9e0f57f3>] erase_effect+0xa1/0xd2
[   39.402214]  [<ffffffff9e0f58c6>] input_ff_flush+0x43/0x5c
[   39.402219]  [<ffffffffc04f32ad>] 0xffffffffc04f32ad
[   39.402227]  [<ffffffff9e0f174f>] input_flush_device+0x3d/0x51
[   39.402234]  [<ffffffff9e0f69ae>] evdev_flush+0x49/0x5c
[   39.402243]  [<ffffffff9dd62d6e>] filp_close+0x3f/0x65
[   39.402253]  [<ffffffff9dd7dcf7>] put_files_struct+0x66/0xc1
[   39.402261]  [<ffffffff9dd7ddeb>] exit_files+0x47/0x4e
[   39.402270]  [<ffffffff9dc6b329>] do_exit+0x483/0x969
[   39.402278]  [<ffffffff9dc73211>] ? recalc_sigpending_tsk+0x3d/0x44
[   39.402285]  [<ffffffff9dc6c7a2>] do_group_exit+0x42/0xb0
[   39.402293]  [<ffffffff9dc767e1>] get_signal+0x58d/0x5bf
[   39.402300]  [<ffffffff9dc03701>] do_signal+0x37/0x53e
[   39.402307]  [<ffffffff9e0f8401>] ? evdev_ioctl_handler+0xac8/0xb04
[   39.402314]  [<ffffffff9e0f8464>] ? evdev_ioctl+0x10/0x12
[   39.402321]  [<ffffffff9dd74cfa>] ? do_vfs_ioctl+0x42e/0x501
[   39.402328]  [<ffffffff9dc0170e>] prepare_exit_to_usermode+0x66/0x90
[   39.402333]  [<ffffffff9dc0181b>] syscall_return_slowpath+0xe3/0xec
[   39.402339]  [<ffffffff9e305b7b>] int_ret_from_sys_call+0x25/0x8f

While we could solve this by simply initializing the completion earlier, we
are better off rearranging the code a bit so we avoid calling complete() on
requests that we did not send out. This patch consolidates marking request
slots as free in one place (in uinput_request_submit(), the same place
where we acquire them) and having everyone else simply signal completion
of the requests.

Fixes: 00ce756ce5 ("Input: uinput - mark failed submission requests as free")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21 16:31:23 -07:00
Dmitry Torokhov e8b95728f7 Input: uinput - avoid FF flush when destroying device
Normally, when input device supporting force feedback effects is being
destroyed, we try to "flush" currently playing effects, so that the
physical device does not continue vibrating (or executing other effects).
Unfortunately this does not work well for uinput as flushing of the effects
deadlocks with the destroy action:

- if device is being destroyed because the file descriptor is being closed,
  then there is noone to even service FF requests;

- if device is being destroyed because userspace sent UI_DEV_DESTROY,
  while theoretically it could be possible to service FF requests,
  userspace is unlikely to do so (they'd need to make sure FF handling
  happens on a separate thread) even if kernel solves the issue with FF
  ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex.

To avoid lockups like the one below, let's install a custom input device
flush handler, and avoid trying to flush force feedback effects when we
destroying the device, and instead rely on uinput to shut off the device
properly.

NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
...
 <<EOE>>  [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40
 [<ffffffff810e633d>] complete+0x1d/0x50
 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput]
 [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput]
 [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput]
 [<ffffffff815d91ad>] erase_effect+0xad/0xf0
 [<ffffffff815d929d>] flush_effects+0x4d/0x90
 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60
 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0
 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60
 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150
 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70
 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput]
 [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput]
 [<ffffffff811231ab>] ? do_futex+0x12b/0xad0
 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput]
 [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60
 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71

Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Reported-by: Clément VUCHENER <clement.vuchener@gmail.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21 16:31:22 -07:00
Arnd Bergmann 1dbc080c9e Input: adxl34x - do not treat FIFO_MODE() as boolean
FIFO_MODE() is a macro expression with a '<<' operator, which gcc points
out could be misread as a '<':

drivers/input/misc/adxl34x.c: In function 'adxl34x_probe':
drivers/input/misc/adxl34x.c:799:36: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context]

While utility of this warning is being disputed (Chief Penguin: "This
warning is clearly pure garbage.") FIFO_MODE() extracts range of values,
with 0 being FIFO_BYPASS, and not something that is logically boolean.

This converts the test to an explicit comparison with FIFO_BYPASS,
making it clearer to gcc and the reader what is intended.

Fixes: e27c729219 ("Input: add driver for ADXL345/346 Digital Accelerometers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-20 12:15:58 -07:00
Robert Jarzmik ae9d1b5fbd Input: wm97xx: add new AC97 bus support
This adds support for the new AC97 bus code, which discovers the devices
rather than uses platform data.

As part of this discovery, it enables a multi-function device wm97xx,
which supports touchscreen, battery, ADC and an audio codec. This patch
adds the code to bind the touchscreen "cell" as the touchscreen driver.

This was tested on the pxa architecture with a pxa270 + wm9713 + the
mioa701 touchscreen.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-19 17:07:28 +01:00
Robert Jarzmik c72f61e740 Input: wm97xx: split out touchscreen registering
wm97xx-core does several things in it initialization :
 - touchscreen input device setup
 - battery device creation

As the wm97xx is actually a multi-function device handling an audio
codec, a touchscreen, a gpio block and an ADC, reshape the probing to
isolate what is truly input/touchscreen specific from the remaining
part.

This is only code shuffling, there is no functional change.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-19 17:04:54 +01:00
Linus Torvalds c8503720fd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
 "A second round of updates for the input subsystem:

   - a new driver for PWM-controlled vibrators

   - ucb1400 touchscreen driver had completely busted suspend/resume
     handling

   - we now handle "home" button found on some devices with Goodix
     touchscreens

   - assorted other fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Gigabyte P57 to the keyboard reset table
  Input: xpad - validate USB endpoint type during probe
  Input: ucb1400_ts - fix suspend and resume handling
  Input: edt-ft5x06 - fix access to non-existing register
  Input: elantech - make arrays debounce_packet static, reduces object code size
  Input: surface3_spi - make const array header static, reduces object code size
  Input: goodix - add support for capacitive home button
  Input: add a driver for PWM controllable vibrators
  Input: adi - make array seq static, reduces object code size
2017-09-16 11:24:26 -07:00
Dmitry Torokhov bbc8608755 Merge branch 'next' into for-linus
Prepare second round of input updates for 4.14 merge window.
2017-09-15 09:52:21 -07:00
Kai-Heng Feng 697c5d8a36 Input: i8042 - add Gigabyte P57 to the keyboard reset table
Similar to other Gigabyte laptops, the touchpad on P57 requires a
keyboard reset to detect Elantech touchpad correctly.

BugLink: https://bugs.launchpad.net/bugs/1594214
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-15 09:51:22 -07:00
Christoph Hellwig 6faadbbb7f dmi: Mark all struct dmi_system_id instances const
... and __initconst if applicable.

Based on similar work for an older kernel in the Grsecurity patch.

[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-09-14 11:59:30 +02:00
Cameron Gutman 122d6a3473 Input: xpad - validate USB endpoint type during probe
We should only see devices with interrupt endpoints. Ignore any other
endpoints that we find, so we don't send try to send them interrupt URBs
and trigger a WARN down in the USB stack.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: <stable@vger.kernel.org> # c01b5e7464 Input: xpad - don't depend on endpoint order
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-12 11:45:59 -07:00
Dmitry Torokhov 39467fc105 Input: ucb1400_ts - fix suspend and resume handling
Instead of stopping the touchscreen we were starting it in suspend, and
disabling it in resume.

Fixes: c899afedf1 ("Input: ucb1400_ts - convert to threaded IRQ")
Reported-by: Anton Volkov <avolkov@ispras.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:56 -07:00
Luca Ceresoli 4701475282 Input: edt-ft5x06 - fix access to non-existing register
reg_addr->reg_report_rate is supposed to exist in M06, not M09.

The driver is written to skip avoids access to non-existing registers
when the register address is NO_REGISTER (0xff). But
reg_addr->reg_report_rate is initialized to 0x00 by devm_kzalloc() (in
edt_ft5x06_ts_probe()) and not changed thereafter. So the checks do
not work and an access to register 0x00 is done.

Fix by setting reg_addr->reg_report_rate to NO_REGISTER.

Also fix the only place where reg_report_rate is checked against zero
instead of NO_REGISTER.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:41 -07:00
Colin Ian King 4f1b461dd1 Input: elantech - make arrays debounce_packet static, reduces object code size
Don't populate the arrays debounce_packet on the stack, instead make
them static.  Makes the object code smaller by over 870 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  30553	   9152	      0	  39705	   9b19	drivers/input/mouse/elantech.o

After:
   text	   data	    bss	    dec	    hex	filename
  29521	   9312	      0	  38833	   97b1	drivers/input/mouse/elantech.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:40 -07:00
Colin Ian King 023c437a7a Input: surface3_spi - make const array header static, reduces object code size
Don't populate the const array header on the stack, instead make it
static.  Makes the object code smaller by over 180 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   6003	   1536	      0	   7539	   1d73	surface3_spi.o

After:
   text	   data	    bss	    dec	    hex	filename
   5726	   1632	      0	   7358	   1cbe	surface3_spi.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:39 -07:00
Sergei A. Trusov 4a54feea17 Input: goodix - add support for capacitive home button
On some x86 tablets with a Goodix touchscreen, the Windows logo on the
front is a capacitive home button. Touching this button results in a touch
with bit 4 of the first byte set, while only the lower 4 bits (0-3) are
used to indicate the number of touches.

Report a KEY_LEFTMETA press when this happens.

Note that the hardware might support more than one button, in which
case the "id" byte of coor_data would identify the button in question.
This is not implemented as we don't have access to hardware with
multiple buttons.

Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-11 14:23:15 -07:00
Linus Torvalds 968c61f7da - New Drivers
- RK805 Power Management IC (PMIC)
    - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
    - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs
 
  - New Device Support
    - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
    - Add support for X-Powers AXP806 to axp20x
    - Add support for X-Powers AXP813 to axp20x
    - Add support for Intel Sunrise Point LPSS to intel-lpss-pci
 
  - New Functionality
    - Amend API to provide register layout; atmel-smc
 
 - Fix-ups
    - DT re-work; omap, nokia
    - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
    - Fix chip ID formatting issue(s); rk808
    - Optionally register touchscreen devices; da9052-core
    - Documentation improvements; twl-core
    - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
    - Drop unnecessary static declaration; max8925-i2c
    - Kconfig changes (missing deps and remove module support)
    - Slim down oversized licence statement; hi6421-pmic-core
    - Use managed resources (devm_*); lp87565
    - Supply proper error checking/handling; t7l66xb
 
  - Bug Fixes
    - Fix counter duplication issue; da9052-core
    - Fix potential NULL deference issue; max8998
    - Leave SPI-NOR write-protection bit alone; lpc_ich
    - Ensure device is put into reset during suspend; intel-lpss
    - Correct register offset variable size; omap-usb-tll
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZsP0YAAoJEFGvii+H/HdhrJUP/RB6BTCDMf3WCi5e6PN8IFST
 JspCcf4bwKVc5lDvORQglVRfBhKY/uSr7F9xlfXtHx8V60ZNo1VOQcyJBTKIz+IJ
 +FQQgM3lEMKIn3QCcu9lKSRomJx55YDnF5SrZ8FzkC8pGLrCYEru5HfqFqOTfPqq
 OH2wZSqiX4H/jYdfVzp3bgqXkDff/nSEGTeFankFkv4wRvLGRxlpVuqkRJcvEJA3
 d8N9MoBBxkZAtAn2j1H5cHyPx5NrBEM2gkXpDfdd+kJNnFzjL72xsXd6rp+N6rcm
 d20eL+1fyJVyvGhGiDOhFwqRAZEqvjPSI4k5kQdRk8IdioGgbmaI74eUbv+rGAKp
 P9QdR7n1ctYyVgwnawIwKTPMzdZo5+9kdagCtu8IBVT02zQqVSDKZM7dAYo2rJuF
 yw24jONcwHFrKA25n1pLJmMbJGHq83kqqw3q5kl17nyArvOOcyspCTODIL9iskhZ
 L0IoIMwQYEj/pnI+iuXl9bJ30v2FIJxyCzUR2u7OJnrH7G27rsoOL0WDqxbp3Dp9
 7tD+6OzMiyIEDxtcd74kjg7g9p5HCmcY3FiDWirmQuZIR3abSET4ap+cTYPdFqVZ
 widS5Pi4PP40ZFN6+4lbBHLlh6MgpHpig9M03kFAr1SyZnH8nf4TnCsFV+wYPyTb
 LR3cKpFeTY8IyFWaLoSg
 =TKIm
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers
   - RK805 Power Management IC (PMIC)
   - ROHM BD9571MWV-M MFD Power Management IC (PMIC)
   - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs

  New Device Support:
   - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core
   - Add support for X-Powers AXP806 to axp20x
   - Add support for X-Powers AXP813 to axp20x
   - Add support for Intel Sunrise Point LPSS to intel-lpss-pci

  New Functionality:
   - Amend API to provide register layout; atmel-smc

  Fix-ups:
   - DT re-work; omap, nokia
   - Header file location change {I2C => MFD}; dm355evm_msp, tps65010
   - Fix chip ID formatting issue(s); rk808
   - Optionally register touchscreen devices; da9052-core
   - Documentation improvements; twl-core
   - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi
   - Drop unnecessary static declaration; max8925-i2c
   - Kconfig changes (missing deps and remove module support)
   - Slim down oversized licence statement; hi6421-pmic-core
   - Use managed resources (devm_*); lp87565
   - Supply proper error checking/handling; t7l66xb

  Bug Fixes:
   - Fix counter duplication issue; da9052-core
   - Fix potential NULL deference issue; max8998
   - Leave SPI-NOR write-protection bit alone; lpc_ich
   - Ensure device is put into reset during suspend; intel-lpss
   - Correct register offset variable size; omap-usb-tll"

* tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits)
  mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants
  mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT
  dt-bindings: mfd: Add bindings for ZII RAVE devices
  mfd: omap-usb-tll: Fix register offsets
  mfd: da9052: Constify spi_device_id
  mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend
  mfd: da9055: Constify i2c_device_id
  mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
  mfd: t7l66xb: Handle return value of clk_prepare_enable
  mfd: Add ROHM BD9571MWV-M PMIC DT bindings
  mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool
  mfd: lp87565: Convert to use devm_mfd_add_devices()
  mfd: Add support for TPS68470 device
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
  mfd: syscon: atmel-smc: Add helper to retrieve register layout
  mfd: axp20x: Use correct platform device ID for many PEK
  dt-bindings: mfd: axp20x: Introduce bindings for AXP813
  mfd: axp20x: Add support for AXP813 PMIC
  dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips
  mfd: Add ROHM BD9571MWV-M MFD PMIC driver
  ...
2017-09-07 13:51:13 -07:00
Linus Torvalds 9d71941d39 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:

 - a new GPIO bit-banging driver implementing PS/2 protocol

 - a new power key driver for Rockchip RK805 PMIC

 - bunch of patches constifying various device ID structures

 - Elan I2C touchpad driver now supports devices with 2 buttons

 - other assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (76 commits)
  Input: byd - make array seq static, reduces object code size
  Input: xilinx_ps2 - fix multiline comment style
  Input: pxa27x_keypad - handle return value of clk_prepare_enable
  Input: tegra-kbc - handle return value of clk_prepare_enable
  Input: PS/2 gpio bit banging driver for serio bus
  Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver
  Input: ambakmi - constify amba_id
  Input: atmel_mxt_ts - add support for reset line
  Input: atmel_mxt_ts - use more managed resources
  Input: wacom_w8001 - constify serio_device_id
  Input: tsc40 - constify serio_device_id
  Input: touchwin - constify serio_device_id
  Input: touchright - constify serio_device_id
  Input: touchit213 - constify serio_device_id
  Input: penmount - constify serio_device_id
  Input: mtouch - constify serio_device_id
  Input: inexio - constify serio_device_id
  Input: hampshire - constify serio_device_id
  Input: gunze - constify serio_device_id
  Input: fujitsu_ts - constify serio_device_id
  ...
2017-09-07 13:39:21 -07:00
Linus Torvalds 44b1671fae Driver core update for 4.14-rc1
Here is the "big" driver core update for 4.14-rc1.
 
 It's really not all that big, the largest thing here being some firmware
 tests to help ensure that that crazy api is working properly.
 
 There's also a new uevent for when a driver is bound or unbound from a
 device, fixing a hole in the driver model that's been there since the
 very beginning.  Many thanks to Dmitry for being persistent and pointing
 out how wrong I was about this all along :)
 
 Patches for the new uevents are already in the systemd tree, if people
 want to play around with them.
 
 Otherwise just a number of other small api changes and updates here,
 nothing major.  All of these patches have been in linux-next for a
 while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa1/IQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn8jACfdQg+YXGxTExonxnyiWgoDMMSO2gAn1ETOaak
 itLO5ll4b6EQ0r3pU27d
 =pCYl
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here is the "big" driver core update for 4.14-rc1.

  It's really not all that big, the largest thing here being some
  firmware tests to help ensure that that crazy api is working properly.

  There's also a new uevent for when a driver is bound or unbound from a
  device, fixing a hole in the driver model that's been there since the
  very beginning. Many thanks to Dmitry for being persistent and
  pointing out how wrong I was about this all along :)

  Patches for the new uevents are already in the systemd tree, if people
  want to play around with them.

  Otherwise just a number of other small api changes and updates here,
  nothing major. All of these patches have been in linux-next for a
  while with no reported issues"

* tag 'driver-core-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
  driver core: bus: Fix a potential double free
  Do not disable driver and bus shutdown hook when class shutdown hook is set.
  base: topology: constify attribute_group structures.
  base: Convert to using %pOF instead of full_name
  kernfs: Clarify lockdep name for kn->count
  fbdev: uvesafb: remove DRIVER_ATTR() usage
  xen: xen-pciback: remove DRIVER_ATTR() usage
  driver core: Document struct device:dma_ops
  mod_devicetable: Remove excess description from structured comment
  test_firmware: add batched firmware tests
  firmware: enable a debug print for batched requests
  firmware: define pr_fmt
  firmware: send -EINTR on signal abort on fallback mechanism
  test_firmware: add test case for SIGCHLD on sync fallback
  initcall_debug: add deferred probe times
  Input: axp20x-pek - switch to using devm_device_add_group()
  Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01
  Input: gpio_keys - use devm_device_add_group() for attributes
  driver core: add devm_device_add_group() and friends
  driver core: add device_{add|remove}_group() helpers
  ...
2017-09-05 10:41:21 -07:00
Linus Torvalds f32c9e059e Merge branch 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
 "Major changes include:

   - Full support of the firmware Page Deallocation Table with
     MADV_HWPOISON and MADV_SOFT_OFFLINE. A kernel thread scans
     regularily for new bad memory pages.

   - Full support for self-extracting kernel.

   - Added UBSAN support.

   - Lots of section mismatch fixes across all parisc drivers.

   - Added examples for %pF and %pS usage in printk-formats.txt"

* 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits)
  printk-formats.txt: Add examples for %pF and %pS usage
  parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge
  parisc/core: Fix section mismatches
  parisc/ipmi_si_intf: Fix section mismatches on parisc platform
  parisc/input/hilkbd: Fix section mismatches
  parisc/net/lasi_82596: Fix section mismatches
  parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers
  parisc: Fix section mismatches in parisc core drivers
  parisc/parport_gsc: Fix section mismatches
  parisc/scsi/lasi700: Fix section mismatches
  parisc/scsi/zalon: Fix section mismatches
  parisc/8250_gsc: Fix section mismatches
  parisc/mux: Fix section mismatches
  parisc/sticore: Fix section mismatches
  parisc/harmony: Fix section mismatches
  parisc: Wire up support for self-extracting kernel
  parisc: Make existing core files reuseable for bootloader
  parisc: Add core code for self-extracting kernel
  parisc: Enable UBSAN support
  parisc/random: Add machine specific randomness
  ...
2017-09-05 09:37:11 -07:00
Lee Jones 3f979bf8f5 Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', 'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged 2017-09-05 08:45:36 +01:00
Sebastian Reichel 3e5b08518f Input: add a driver for PWM controllable vibrators
Provide a simple driver for PWM controllable vibrators.
It will be used by Motorola Droid 4.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-04 12:13:24 -07:00
Colin Ian King 1bf21b3373 Input: adi - make array seq static, reduces object code size
Don't populate the array seq on the stack, instead make it static.
Makes the object code smaller by over 170 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  13227	   3232	      0	  16459	   404b	drivers/input/joystick/adi.o

After:
   text	   data	    bss	    dec	    hex	filename
  12957	   3328	      0	  16285	   3f9d	drivers/input/joystick/adi.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-04 09:28:15 -07:00
Dmitry Torokhov a6cbfa1e6d Merge branch 'next' into for-linus
Prepare input updates for 4.14 merge window.
2017-09-04 09:22:54 -07:00
Wolfram Sang a205425658 mfd: twl: Move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-09-04 14:41:02 +01:00
Linus Torvalds 3e1d79c811 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Just a couple drivers fixes (Synaptics PS/2, Xpad)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - fix PowerA init quirk for some gamepad models
  Input: synaptics - fix device info appearing different on reconnect
2017-09-01 10:43:37 -07:00
Colin Ian King 08d6ac9ee5 Input: byd - make array seq static, reduces object code size
Don't populate the array seq on the stack, instead make it static.
Makes the object code smaller by over 1100 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   6152	   1216	     64	   7432	   1d08	drivers/input/mouse/byd.o

After:
   text	   data	    bss	    dec	    hex	filename
   4974	   1280	     64	   6318	   18ae	drivers/input/mouse/byd.o

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-31 18:09:48 -07:00
Michal Simek da1a42cd45 Input: xilinx_ps2 - fix multiline comment style
Fix multiline comments style not to be reported by checkpatch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-31 15:01:30 -07:00
Arvind Yadav 117b2dc58c Input: pxa27x_keypad - handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-31 11:57:35 -07:00
Arvind Yadav 8a7f102c4b Input: tegra-kbc - handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-31 11:57:27 -07:00
Cameron Gutman f5308d1b83 Input: xpad - fix PowerA init quirk for some gamepad models
The PowerA gamepad initialization quirk worked with the PowerA
wired gamepad I had around (0x24c6:0x543a), but a user reported [0]
that it didn't work for him, even though our gamepads shared the
same vendor and product IDs.

When I initially implemented the PowerA quirk, I wanted to avoid
actually triggering the rumble action during init. My tests showed
that my gamepad would work correctly even if it received a rumble
of 0 intensity, so that's what I went with.

Unfortunately, this apparently isn't true for all models (perhaps
a firmware difference?). This non-working gamepad seems to require
the real magic rumble packet that the Microsoft driver sends, which
actually vibrates the gamepad. To counteract this effect, I still
send the old zero-rumble PowerA quirk packet which cancels the
rumble effect before the motors can spin up enough to vibrate.

[0]: https://github.com/paroj/xpad/issues/48#issuecomment-313904867

Reported-by: Kyle Beauchamp <kyleabeauchamp@gmail.com>
Tested-by: Kyle Beauchamp <kyleabeauchamp@gmail.com>
Fixes: 81093c9848 ("Input: xpad - support some quirky Xbox One pads")
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-31 11:55:11 -07:00
Anthony Martin 3f9db52dc8 Input: synaptics - fix device info appearing different on reconnect
User-modified input settings no longer survive a suspend/resume cycle.
Starting with 4.12, the touchpad is reinitialized on every reconnect
because the hardware appears to be different. This can be reproduced
by running the following as root:

    echo -n reconnect >/sys/devices/platform/i8042/serio1/drvctl

A line like the following will show up in dmesg:

    [30378.295794] psmouse serio1: synaptics: hardware appears to be
                   different: id(149271-149271), model(114865-114865),
                   caps(d047b3-d047b1), ext(b40000-b40000).

Note the single bit difference in caps: bit 1 (SYN_CAP_MULTIFINGER).

This happens because we modify our stored copy of the device info
capabilities when we enable advanced gesture mode but this change is
not reflected in the actual hardware capabilities.

It worked in the past because synaptics_query_hardware used to modify
the stored synaptics_device_info struct instead of filling in a new
one, as it does now.

Fix it by no longer faking the SYN_CAP_MULTIFINGER bit when setting
advanced gesture mode. This necessitated a small refactoring.

Fixes: 6c53694fb2 ("Input: synaptics - split device info into a separate structure")
Signed-off-by: Anthony Martin <ality@pbrane.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-28 10:36:46 -07:00
Danilo Krummrich 9ee0a05588 Input: PS/2 gpio bit banging driver for serio bus
This driver provides PS/2 serio bus support by implementing bit banging
with the GPIO API. The GPIO pins, data and clock, can be configured with
a node in the device tree or by generic device properties (GDP).

Writing to a device is supported as well, though it is possible timings
can not be halt as they are tough and difficult to reach with bit banging.
Therefore it can be configured (also in DT and GDP) whether the serio
write function should be available for clients.

This driver is for development purposes and not recommended for productive
use. However, this driver can be useful e.g. when no USB port is available
or using old peripherals is desired as PS/2 controller chips getting rare.

This driver was tested on bcm2825 and on Kirin 960 and it worked well
together with the atkbd and psmouse driver.

Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-28 10:32:10 -07:00
Liang Yan 0ca0681002 Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver
Long pressed key could not show right in XEN vncviewer after tigervnc
client changed the way how to send repeat keys, from "Down Up Down Up
..." to "Down Down ... Up". This will report autorepeat to input by
checking if same key being pressed, and let handler process it finally.

Signed-off-by: Liang Yan <lyan@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-28 10:31:31 -07:00
Linus Torvalds bab9752480 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:

 - a tweak to the IBM Trackpoint driver that helps recognizing
   trackpoints on never Lenovo Carbons

 - a fix to the ALPS driver solving scroll issues on some Dells

 - yet another ACPI ID has been added to Elan I2C toucpad driver

 - quieted diagnostic message in soc_button_array driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad
  Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365
  Input: trackpoint - add new trackpoint firmware ID
  Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310
2017-08-26 12:48:29 -07:00
Arvind Yadav b54bf2fd15 Input: ambakmi - constify amba_id
amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-24 16:07:24 -07:00
Masaki Ota 4a646580f7 Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad
Fixed the issue that two finger scroll does not work correctly
on V8 protocol. The cause is that V8 protocol X-coordinate decode
is wrong at SS4 PLUS device. I added SS4 PLUS X decode definition.

Mote notes:
the problem manifests itself by the commit e7348396c6 ("Input: ALPS
- fix V8+ protocol handling (73 03 28)"), where a fix for the V8+
protocol was applied.  Although the culprit must have been present
beforehand, the two-finger scroll worked casually even with the
wrongly reported values by some reason.  It got broken by the commit
above just because it changed x_max value, and this made libinput
correctly figuring the MT events.  Since the X coord is reported as
falsely doubled, the events on the right-half side go outside the
boundary, thus they are no longer handled.  This resulted as a broken
two-finger scroll.

One finger event is decoded differently, and it didn't suffer from
this problem.  The problem was only about MT events. --tiwai

Fixes: e7348396c6 ("Input: ALPS - fix V8+ protocol handling (73 03 28)")
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Paul Donohue <linux-kernel@PaulSD.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-24 15:53:46 -07:00