firewire-net:
- set min/max_mtu
- remove fwnet_change_mtu
nes:
- set max_mtu
- clean up nes_netdev_change_mtu
xpnet:
- set min/max_mtu
- remove xpnet_dev_change_mtu
hippi:
- set min/max_mtu
- remove hippi_change_mtu
batman-adv:
- set max_mtu
- remove batadv_interface_change_mtu
- initialization is a little async, not 100% certain that max_mtu is set
in the optimal place, don't have hardware to test with
rionet:
- set min/max_mtu
- remove rionet_change_mtu
slip:
- set min/max_mtu
- streamline sl_change_mtu
um/net_kern:
- remove pointless ndo_change_mtu
hsi/clients/ssi_protocol:
- use core MTU range checking
- remove now redundant ssip_pn_set_mtu
ipoib:
- set a default max MTU value
- Note: ipoib's actual max MTU can vary, depending on if the device is in
connected mode or not, so we'll just set the max_mtu value to the max
possible, and let the ndo_change_mtu function continue to validate any new
MTU change requests with checks for CM or not. Note that ipoib has no
min_mtu set, and thus, the network core's mtu > 0 check is the only lower
bounds here.
mptlan:
- use net core MTU range checking
- remove now redundant mpt_lan_change_mtu
fddi:
- min_mtu = 21, max_mtu = 4470
- remove now redundant fddi_change_mtu (including export)
fjes:
- min_mtu = 8192, max_mtu = 65536
- The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to
get past the core net MTU range checks so fjes_change_mtu can validate a
new MTU against what it supports (see fjes_support_mtu in fjes_hw.c)
hsr:
- min_mtu = 0 (calls ether_setup, max_mtu is 1500)
f_phonet:
- min_mtu = 6, max_mtu = 65541
u_ether:
- min_mtu = 14, max_mtu = 15412
phonet/pep-gprs:
- min_mtu = 576, max_mtu = 65530
- remove redundant gprs_set_mtu
CC: netdev@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: Stefan Richter <stefanr@s5r6.in-berlin.de>
CC: Faisal Latif <faisal.latif@intel.com>
CC: linux-rdma@vger.kernel.org
CC: Cliff Whickman <cpw@sgi.com>
CC: Robin Holt <robinmholt@gmail.com>
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sathya Prakash <sathya.prakash@broadcom.com>
CC: Chaitra P B <chaitra.basappa@broadcom.com>
CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
CC: MPT-FusionLinux.pdl@broadcom.com
CC: Sebastian Reichel <sre@kernel.org>
CC: Felipe Balbi <balbi@kernel.org>
CC: Arvid Brodin <arvid.brodin@alten.se>
CC: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ssip_xmit should be called from process context,
since it calls hsi_async_write.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
To avoid setting irq_safe runtime pm flag in omap-ssi, multiple calls
will be moved to process context. This also affects ssi-protocol, so
use the safer spin_lock_bh instead of a simple spin_lock.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
This avoids calling ssi_waketest(), while a spinlock is
being hold, since ssi_waketest may sleep once irq_safe
runtime pm is disabled.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
When using the ssi-protocol driver with the Nokia N950, the
following error is thrown during modem powered up sequence.
[13852.274993] port0: SSI error: 0x01
[13852.279205] ssi-protocol ssi-protocol: RX error detected
[13852.284820] ssi-protocol ssi-protocol: Main state: 1
[13852.290069] ssi-protocol ssi-protocol: Recv state: 0
[13852.295288] ssi-protocol ssi-protocol: Send state: 0
[13852.300537] ssi-protocol ssi-protocol: CMT Offline
[13852.305603] ssi-protocol ssi-protocol: Wake test 1
[13852.310638] ssi-protocol ssi-protocol: Data RX id: 0
[13852.315887] ssi-protocol ssi-protocol: Data TX id: 0
[13856.001464] ssi-protocol ssi-protocol: Watchdog trigerred
[13856.007293] ssi-protocol ssi-protocol: Main state: 1
[13856.012542] ssi-protocol ssi-protocol: Recv state: 0
[13856.017761] ssi-protocol ssi-protocol: Send state: 0
[13856.023010] ssi-protocol ssi-protocol: CMT Offline
[13856.028045] ssi-protocol ssi-protocol: Wake test 0
[13856.033111] ssi-protocol ssi-protocol: Data RX id: 0
[13856.038330] ssi-protocol ssi-protocol: Data TX id: 0
This patch fixes the issue by using the handshake setup from
the Nokia N950 kernel. The new handshake sequence also works
with the N900, so there is no need to differentiate between
both modems.
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
* misc. fixes in SSI related drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jKr0
-----END PGP SIGNATURE-----
Merge tag 'hsi-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI changes from Sebastian Reichel:
"Misc fixes in SSI related drivers"
* tag 'hsi-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi: Fix return value check in ssi_debug_add_ctrl()
HSI: omap_ssi_port: Fix return value check in ssi_debug_add_port()
HSI: ssi_protocol: Fix sparse non static symbol warning
drivers/hsi/controllers/omap_ssi{,_port}.c: fix failure checks
Fixes the following sparse warning:
drivers/hsi/clients/ssi_protocol.c:904:6: warning:
symbol 'ssip_port_event' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This adds a driver for the SSI McSAAB protocol as used in
the Nokia N900.
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Jarod Wilson