When downing and upping the ef100 filter table, we need to take a write
lock on efx->filter_sem, not just a read lock, because we may kfree()
the table pointers.
Without this, resets cause a WARN_ON from efx_rwsem_assert_write_locked().
Fixes: a9dc3d5612 ("sfc_ef100: RX filter table management and related gubbins")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Actually hook up the .rx_buf_hash_valid method in EF100's nic_type.
Fixes: 068885434c ("sfc: check hash is valid before using it")
Reported-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.
iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:
# ip link add link eth0 name macvlan0 type macvlan mode source
# ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
RTNETLINK answers: Cannot assign requested address
# ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
# ip -d link show macvlan0
5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ...
link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...
With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The refactoring and consolidation of <asm/pgalloc.h> caused regression
on parisc and ia64. The fix for parisc made it into v5.9-rc1 while the
fix ia64 got delayed a bit and here it is.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAl87qP8THHJwcHRAbGlu
dXguaWJtLmNvbQAKCRA5A4Ymyw79keEuB/4yCQjJbW+0y+DaivCjUtAPpBek+tpn
sYW5nWFiE4JlTfZf1ujQ4QpHHkL9y8OXo3zfE1G49lCT97j1GveMpEu68k31+YjO
uhLY9mv7kFlkuDTgrdkCKOJg+e8HmM6NRUEGJ+Vxoo03S9jpqWjckAURGaluEI/w
uoI8f64Apc6bjGiOygUIva73B2RGjWOnfoVecy0h7EMRrRHgQV/sJQWHRKVcHKok
3Mdnswzg07jmR55GTJtm0rO78h/+5B0FCgr1iOK9oo0tMkxSk3DS0Xy7eHhlPaX4
x1gqhi11XsqDowJfMr/WyfpjGFUp2/yeRoNux1L34zFdxxxKCNowvXk0
=h7gw
-----END PGP SIGNATURE-----
Merge tag 'fixes-2020-08-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull ia64 page table fix from Mike Rapoport:
"Fix regression in IA-64 caused by page table allocation refactoring
The refactoring and consolidation of <asm/pgalloc.h> caused regression
on parisc and ia64. The fix for parisc made it into v5.9-rc1 while the
fix ia64 got delayed a bit and here it is"
* tag 'fixes-2020-08-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch/ia64: Restore arch-specific pgd_offset_k implementation
Recently we found regression when running will_it_scale/page_fault3 test
on ARM64. Over 70% down for the multi processes cases and over 20% down
for the multi threads cases. It turns out the regression is caused by
commit 89b15332af ("mm: drop mmap_sem before calling
balance_dirty_pages() in write fault").
The test mmaps a memory size file then write to the mapping, this would
make all memory dirty and trigger dirty pages throttle, that upstream
commit would release mmap_sem then retry the page fault. The retried
page fault would see correct PTEs installed then just fall through to
spurious TLB flush. The regression is caused by the excessive spurious
TLB flush. It is fine on x86 since x86's spurious TLB flush is no-op.
We could just skip the spurious TLB flush to mitigate the regression.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Xu Yu <xuyu@linux.alibaba.com>
Debugged-by: Xu Yu <xuyu@linux.alibaba.com>
Tested-by: Xu Yu <xuyu@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ext4_generic_delete_entry function does not use the parameter
handle, so it can be removed.
Signed-off-by: Kyoungho Koo <rnrudgh@gmail.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200810080701.GA14160@koo-Z370-HD3
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
seq_puts is a lot cheaper than seq_printf, so use that to print
literal strings.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200810022158.9167-1-vulab@iscas.ac.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
It might be better to adjust the code in two places:
1. Determine whether grp is currupt or not should be placed first.
2. (cr<=2 && free <ac->ac_g_ex.fe_len)should may belong to the crx
strategy, and it may be more appropriate to put it in the
subsequent switch statement block. For cr1, cr2, the conditions
in switch potentially realize the above judgment. For cr0, we
should add (free <ac->ac_g_ex.fe_len) judgment, and then delete
(free / fragments) >= ac->ac_g_ex.fe_len), because cr0 returns
true by default.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/e20b2d8f-1154-adb7-3831-a9e11ba842e9@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
These comments do not seem to be related to ext4_mb_check_limits(),
it may be invalid.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c49faf0c-d5d5-9c51-6911-9e0ff57c6bfa@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On ppc64le we get the following warning:
In file included from btf_dump.c:16:0:
btf_dump.c: In function ‘btf_dump_emit_struct_def’:
../include/linux/kernel.h:20:17: error: comparison of distinct pointer types lacks a cast [-Werror]
(void) (&_max1 == &_max2); \
^
btf_dump.c:882:11: note: in expansion of macro ‘max’
m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
^~~
Fix by explicitly casting to __s64, which is a return type from
btf__resolve_size().
Fixes: 702eddc77a ("libbpf: Handle GCC built-in types for Arm NEON")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818164456.1181661-1-andriin@fb.com
IA32_MCG_STATUS.RIPV indicates whether the return RIP value pushed onto
the stack as part of machine check delivery is valid or not.
Various drivers copied a code fragment that uses the RIPV bit to
determine the severity of the error as either HW_EVENT_ERR_UNCORRECTED
or HW_EVENT_ERR_FATAL, but this check is reversed (marking errors where
RIPV is set as "FATAL").
Reverse the tests so that the error is marked fatal when RIPV is not set.
Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200707194324.14884-1-tony.luck@intel.com
I do not know when ConfigInfoView::createStandardContextMenu() is
called.
Because QTextEdit::createStandardContextMenu() is not virtual,
ConfigInfoView::createStandardContextMenu() cannot override it.
Even if right-click the ConfigInfoView window, the "Show Debug Info"
menu does not show up.
Build up the menu in the constructor, and invoke it from the
contextMenuEvent().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If you right-click in the ConfigList window, you will see the following
messages in the console:
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect: (sender name: 'config')
Right, there is no such slot in QAction. I think this is a typo of
setChecked.
Due to this bug, when you toggled the menu "Option->Show Name/Range/Data"
the state of the context menu was not previously updated. Fix this.
Fixes: d5d973c3f8 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use the proper form of the RESTRICT keyword.
Quote the comments properly too.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The '%' in filter/filter-out matches to any number of any characters,
including empty string.
So, '%config' matches to 'config', and '%install' to 'install'.
Drop the redundant patterns.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fix the following warning from sparse:
scripts/extract-cert.c:74:5: warning: symbol 'kbuild_verbose' was not declared. Should it be static?
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
For a power9 KVM guest with XIVE enabled, running a test loop
where we hotplug 384 vcpus and then unplug them, the following traces
can be seen (generally within a few loops) either from the unplugged
vcpu:
cpu 65 (hwid 65) Ready to die...
Querying DEAD? cpu 66 (66) shows 2
list_del corruption. next->prev should be c00a000002470208, but was c00a000002470048
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
Oops: Exception in kernel mode, sig: 5 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: fuse nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 ...
CPU: 66 PID: 0 Comm: swapper/66 Kdump: loaded Not tainted 4.18.0-221.el8.ppc64le #1
NIP: c0000000007ab50c LR: c0000000007ab508 CTR: 00000000000003ac
REGS: c0000009e5a17840 TRAP: 0700 Not tainted (4.18.0-221.el8.ppc64le)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000842 XER: 20040000
...
NIP __list_del_entry_valid+0xac/0x100
LR __list_del_entry_valid+0xa8/0x100
Call Trace:
__list_del_entry_valid+0xa8/0x100 (unreliable)
free_pcppages_bulk+0x1f8/0x940
free_unref_page+0xd0/0x100
xive_spapr_cleanup_queue+0x148/0x1b0
xive_teardown_cpu+0x1bc/0x240
pseries_mach_cpu_die+0x78/0x2f0
cpu_die+0x48/0x70
arch_cpu_idle_dead+0x20/0x40
do_idle+0x2f4/0x4c0
cpu_startup_entry+0x38/0x40
start_secondary+0x7bc/0x8f0
start_secondary_prolog+0x10/0x14
or on the worker thread handling the unplug:
pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a
Querying DEAD? cpu 314 (314) shows 2
BUG: Bad page state in process kworker/u768:3 pfn:95de1
cpu 314 (hwid 314) Ready to die...
page:c00a000002577840 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0
flags: 0x5ffffc00000000()
raw: 005ffffc00000000 5deadbeef0000100 5deadbeef0000200 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffff7f 0000000000000000
page dumped because: nonzero mapcount
Modules linked in: kvm xt_CHECKSUM ipt_MASQUERADE xt_conntrack ...
CPU: 0 PID: 548 Comm: kworker/u768:3 Kdump: loaded Not tainted 4.18.0-224.el8.bz1856588.ppc64le #1
Workqueue: pseries hotplug workque pseries_hp_work_fn
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
bad_page+0x12c/0x1b0
free_pcppages_bulk+0x5bc/0x940
page_alloc_cpu_dead+0x118/0x120
cpuhp_invoke_callback.constprop.5+0xb8/0x760
_cpu_down+0x188/0x340
cpu_down+0x5c/0xa0
cpu_subsys_offline+0x24/0x40
device_offline+0xf0/0x130
dlpar_offline_cpu+0x1c4/0x2a0
dlpar_cpu_remove+0xb8/0x190
dlpar_cpu_remove_by_index+0x12c/0x150
dlpar_cpu+0x94/0x800
pseries_hp_work_fn+0x128/0x1e0
process_one_work+0x304/0x5d0
worker_thread+0xcc/0x7a0
kthread+0x1ac/0x1c0
ret_from_kernel_thread+0x5c/0x80
The latter trace is due to the following sequence:
page_alloc_cpu_dead
drain_pages
drain_pages_zone
free_pcppages_bulk
where drain_pages() in this case is called under the assumption that
the unplugged cpu is no longer executing. To ensure that is the case,
and early call is made to __cpu_die()->pseries_cpu_die(), which runs a
loop that waits for the cpu to reach a halted state by polling its
status via query-cpu-stopped-state RTAS calls. It only polls for 25
iterations before giving up, however, and in the trace above this
results in the following being printed only .1 seconds after the
hotplug worker thread begins processing the unplug request:
pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a
Querying DEAD? cpu 314 (314) shows 2
At that point the worker thread assumes the unplugged CPU is in some
unknown/dead state and procedes with the cleanup, causing the race
with the XIVE cleanup code executed by the unplugged CPU.
Fix this by waiting indefinitely, but also making an effort to avoid
spurious lockup messages by allowing for rescheduling after polling
the CPU status and printing a warning if we wait for longer than 120s.
Fixes: eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[mpe: Trim oopses in change log slightly for readability]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200811161544.10513-1-mdroth@linux.vnet.ibm.com
On BOOK3S_32, when we have modules and strict kernel RWX, modules
are not in vmalloc space but in a dedicated segment that is
below PAGE_OFFSET.
So KASAN_SHADOW_START must take it into account.
MODULES_VADDR can't be used because it is not defined yet
in kasan.h
Fixes: 6ca055322d ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6eddca2d5611fd57312a88eae31278c87a8fc99d.1596641224.git.christophe.leroy@csgroup.eu
FCP T10-PI and NVMe features are independent of each other. This patch
allows both features to co-exist.
This reverts commit 5da05a26b8.
Link: https://lore.kernel.org/r/20200806111014.28434-12-njavali@marvell.com
Fixes: 5da05a26b8 ("scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FCoE adapter initialization failed for ISP8021 with the following patch
applied. In addition, reproduction of the issue the patch originally tried
to address has been unsuccessful.
This reverts commit 3cb182b3fa.
Link: https://lore.kernel.org/r/20200806111014.28434-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
OS boot during Boot from SAN was stuck at dracut emergency shell after
enabling NVMe driver parameter. For non-MQ support the driver was enabling
MQ. Add a check to confirm if FW supports MQ.
Link: https://lore.kernel.org/r/20200806111014.28434-9-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
qla_nvme_register_hba() puts out a warning when there are not enough queue
pairs available for FC-NVME. Just fail the NVME registration rather than a
WARNING + call Trace.
Link: https://lore.kernel.org/r/20200806111014.28434-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ql2xextended_error_logging can now be set to 1 to get the default mask
value, as opposed to at module load time only.
Link: https://lore.kernel.org/r/20200806111014.28434-7-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Multipath errors were seen during failback due to login timeout. The
remote device sent LOGO, the local host tore down the session and did
relogin. The RSCN arrived indicates remote device is going through failover
after which the relogin is in a 20s timeout phase. At this point the
driver is stuck in the relogin process. Add a fix to delete the session as
part of abort/flush the login.
Link: https://lore.kernel.org/r/20200806111014.28434-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On Zone Disable, certain switches would ignore all commands. This causes
timeout for both switch scan command and abort of that command. On
detection of this condition, all sessions will be shutdown.
Link: https://lore.kernel.org/r/20200806111014.28434-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
John Garry reported 'sdebug_q_cmd_complete: scp is NULL' failures that were
mainly seen on aarch64 machines (e.g. RPi 4 with four A72 CPUs). The
problem was tracked down to a missing critical section on a "short circuit"
path. Namely, the time to process the current command so far has already
exceeded the requested command duration (i.e. the number of nanoseconds in
the ndelay parameter).
The random=1 parameter setting was pivotal in finding this error. The
failure scenario involved first taking that "short circuit" path (due to a
very short command duration) and then taking the more likely
hrtimer_start() path (due to a longer command duration). With random=1 each
command's duration is taken from the uniformly distributed [0..ndelay)
interval. The fio utility also helped by reliably generating the error
scenario at about once per minute on a RPi 4 (64 bit OS).
Link: https://lore.kernel.org/r/20200813155738.109298-1-dgilbert@interlog.com
Reported-by: John Garry <john.garry@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Before v4.15 commit 75492a5156 ("s390/scsi: Convert timers to use
timer_setup()"), we intentionally only passed zfcp_adapter as context
argument to zfcp_fsf_request_timeout_handler(). Since we only trigger
adapter recovery, it was unnecessary to sync against races between timeout
and (late) completion. Likewise, we only passed zfcp_erp_action as context
argument to zfcp_erp_timeout_handler(). Since we only wakeup an ERP action,
it was unnecessary to sync against races between timeout and (late)
completion.
Meanwhile the timeout handlers get timer_list as context argument and do a
timer-specific container-of to zfcp_fsf_req which can have been freed.
Fix it by making sure that any request timeout handlers, that might just
have started before del_timer(), are completed by using del_timer_sync()
instead. This ensures the request free happens afterwards.
Space time diagram of potential use-after-free:
Basic idea is to have 2 or more pending requests whose timeouts run out at
almost the same time.
req 1 timeout ERP thread req 2 timeout
---------------- ---------------- ---------------------------------------
zfcp_fsf_request_timeout_handler
fsf_req = from_timer(fsf_req, t, timer)
adapter = fsf_req->adapter
zfcp_qdio_siosl(adapter)
zfcp_erp_adapter_reopen(adapter,...)
zfcp_erp_strategy
...
zfcp_fsf_req_dismiss_all
list_for_each_entry_safe
zfcp_fsf_req_complete 1
del_timer 1
zfcp_fsf_req_free 1
zfcp_fsf_req_complete 2
zfcp_fsf_request_timeout_handler
del_timer 2
fsf_req = from_timer(fsf_req, t, timer)
zfcp_fsf_req_free 2
adapter = fsf_req->adapter
^^^^^^^ already freed
Link: https://lore.kernel.org/r/20200813152856.50088-1-maier@linux.ibm.com
Fixes: 75492a5156 ("s390/scsi: Convert timers to use timer_setup()")
Cc: <stable@vger.kernel.org> #4.15+
Suggested-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the bit corresponding to a task in the Doorbell register has been
cleared, no need to poll the status of the task on the device side and to
send an Abort Task TM. Instead, let it directly goto cleanup.
In addition, to keep original debug output, move the goto below the debug
print.
Link: https://lore.kernel.org/r/20200811141859.27399-3-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If somehow no interrupt notification is raised for a completed request and
its doorbell bit is cleared by host, UFS driver needs to cleanup its
outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally
in the following scenario:
After ufshcd_abort() returns, this request will be requeued by SCSI layer
with its outstanding bit set. Any future completed request will trigger
ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At
this time the "abnormal outstanding bit" will be detected and the "requeued
request" will be chosen to execute request post-processing flow. This is
wrong because this request is still "alive".
Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For shared interrupts, the interrupt status might be zero, so check that
first.
Link: https://lore.kernel.org/r/20200811133936.19171-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The interrupt might be shared, in which case it is not an error for the
interrupt handler to be called when the interrupt status is zero, so don't
print the message unless there was enabled interrupt status.
Link: https://lore.kernel.org/r/20200811133936.19171-1-adrian.hunter@intel.com
Fixes: 9333d77573 ("scsi: ufs: Fix irq return code")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Intel EHL UFS host controller advertises auto-hibernate capability but it
does not work correctly. Add a quirk for that.
[mkp: checkpatch fix]
Link: https://lore.kernel.org/r/20200810141024.28859-1-adrian.hunter@intel.com
Fixes: 8c09d75276 ("scsi: ufshdc-pci: Add Intel PCI IDs for EHL")
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix incorrect calculation of "ms" based waiting time in function
ufs_mtk_setup_clocks().
Link: https://lore.kernel.org/r/20200809055702.20140-1-stanley.chu@mediatek.com
Fixes: 9006e3986f ("scsi: ufs-mediatek: Do not gate clocks if auto-hibern8 is not entered yet")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.
Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.
Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ixgbe_fcoe_ddp_setup() can be called from the main I/O path and is called
with a spin_lock held, so we have to use GFP_ATOMIC allocation instead of
GFP_KERNEL.
Link: https://lore.kernel.org/r/1596831813-9839-1-git-send-email-michael.christie@oracle.com
cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix to return error code PTR_ERR() from the error handling case instead of
0.
Link: https://lore.kernel.org/r/20200806070135.67797-1-jingxiangfeng@huawei.com
Fixes: 22617e2163 ("scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=OLbG
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull mailmap update from Kees Cook:
"This was originally part of my pstore tree, but when I realized that
mailmap needed re-alphabetizing, I decided to wait until -rc1 to send
this, as I saw a lot of mailmap additions pending in -next for the
merge window.
It's a programmatic reordering and the addition of a pstore
contributor's preferred email address"
* tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mailmap: Add WeiXiong Liao
mailmap: Restore dictionary sorting
Pull networking fixes from David Miller:
"Another batch of fixes:
1) Remove nft_compat counter flush optimization, it generates warnings
from the refcount infrastructure. From Florian Westphal.
2) Fix BPF to search for build id more robustly, from Jiri Olsa.
3) Handle bogus getopt lengths in ebtables, from Florian Westphal.
4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and
Oleksij Rempel.
5) Reset iter properly on mptcp sendmsg() error, from Florian
Westphal.
6) Show a saner speed in bonding broadcast mode, from Jarod Wilson.
7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones.
8) Fix double unregister in bonding during namespace tear down, from
Cong Wang.
9) Disable RP filter during icmp_redirect selftest, from David Ahern"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
otx2_common: Use devm_kcalloc() in otx2_config_npa()
net: qrtr: fix usage of idr in port assignment to socket
selftests: disable rp_filter for icmp_redirect.sh
Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
phylink: <linux/phylink.h>: fix function prototype kernel-doc warning
mptcp: sendmsg: reset iter on error redux
net: devlink: Remove overzealous WARN_ON with snapshots
tipc: not enable tipc when ipv6 works as a module
tipc: fix uninit skb->data in tipc_nl_compat_dumpit()
net: Fix potential wrong skb->protocol in skb_vlan_untag()
net: xdp: pull ethernet header off packet after computing skb->protocol
ipvlan: fix device features
bonding: fix a potential double-unregister
can: j1939: add rxtimer for multipacket broadcast session
can: j1939: abort multipacket broadcast session when timeout occurs
can: j1939: cancel rxtimer on multipacket broadcast session complete
can: j1939: fix support for multipacket broadcast message
net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs'
net: fddi: skfp: cfm: Remove set but unused variable 'oldstate'
net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs'
...
Edward Cree