Commit Graph

19 Commits

Author SHA1 Message Date
Manuel Schönlaub 44f83144ca [media] az6027: Added the PID for a new revision of the Elgato EyeTV Sat DVB-S Tuner
There is another clone of AZ6027. This patch adds the relevant PID.

Signed-off-by: Manuel Schönlaub <manuel.schoenlaub@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 15:49:35 -03:00
Alessandro Miceli 74a86272f0 [media] rtl28xxu: add [1b80:d3af] Sveon STV27
Added support for Sveon STV27 device (rtl2832u + FC0013 tuner)

Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13 20:25:47 -03:00
Alessandro Miceli f27f5b0ee4 [media] rtl28xxu: add [1b80:d39d] Sveon STV20
Added Sveon STV20 device based on Realtek RTL2832U and FC0012 tuner

Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13 20:25:31 -03:00
Till Dörges a24bc323eb [media] rtl28xxu: add ID [0ccd:00b4] TerraTec NOXON DAB Stick (rev 3)
I've got the following DAB USB stick that also works fine with the
DVB_USB_RTL28XXU driver after I added its USB ID:
	Bus 001 Device 009: ID 0ccd:00b4 TerraTec Electronic GmbH

[crope@iki.fi: apply patch partly manually]
Signed-off-by: Till Dörges <till@doerges.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24 10:32:11 -03:00
Robert Backhaus d22d32e117 [media] Add USB IDs for Winfast DTV Dongle Mini-D
GIT_AUTHOR_DATE=1386943312
    Add USB IDs for the WinFast DTV Dongle Mini.
    Device is tested and works fine under MythTV

    Signed-off-by: Robert Backhaus <robbak@robbak.com>

Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-19 09:26:15 -02:00
Malcolm Priestley 17f335c304 [media] it913x: Add support for Avermedia H335 id 0x0335
Trivial USB ID addition for Avermedia H335.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-18 10:27:53 -02:00
Roland Scheidegger 431cb35018 [media] az6007: support Technisat Cablestar Combo HDCI (minus remote)
This is similar to the Terratec H7. It works with the same az6007 firmware as
the former, however the drx-k firmware of the H7 will NOT work. Hence use
a different firmware name. The firmware does not need to exist as the one in
the eeprom is just fine as long as the h7 one doesn't get loaded, but maybe
some day someone wants to load it (the one from the h5 would work too).
Also since the config entry is now different anyway disable support for rc.
AFAIK the Technisat remote (TS35) is RC5 and the code (which a code comment
claims doesn't work anyway) only would handle NEC hence it's pointless creating
a device and polling it if we already know it can't work.
CI is untested.

Originally based on idea found on
http://www.linuxtv.org/wiki/index.php/TechniSat_CableStar_Combo_HD_CI claiming
only id needs to be added (but failed to mention it only worked because the
driver couldn't find the h7 drx-k firmware...).

Signed-off-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10 07:15:54 -02:00
Michael Krufky c859e6ef33 [media] dib0700: add support for PCTV 2002e & PCTV 2002e SE
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-22 07:48:11 -03:00
Alessandro Miceli c6be75264b [media] Add support for Crypto Redi PC50A device (rtl2832u + FC0012 tuner)
The device has been tested on a MIPSel box with kernel 3.1.1 and backported media_tree drivers
The kernel detects the device with the following output:
usbcore: registered new interface driver dvb_usb_rtl28xxu
usb 1-2: dvb_usb_v2: found a 'Crypto Redi PC50A' in warm state
usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Crypto Redi PC50A)
usb 1-2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
i2c i2c-4: fc0012: Fitipower FC0012 successfully identified
usb 1-2: dvb_usb_v2: 'Crypto Redi PC50A' successfully initialized and connected

[crope@iki.fi: fix trivial merge conflict]
Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-08 21:59:59 -03:00
Alessandro Miceli a7fab85111 [media] Add support for 'Digital Dual TV Receiver CTVDIGDUAL v2
Tested on a MIPSel box with 3.3.6 kernel
The kernel output when the device will be detected follows:
usbcore: registered new interface driver dvb_usb_it913x
it913x: Chip Version=01 Chip Type=9135
it913x: Remote propriety (raw) mode
it913x: Dual mode=3 Tuner Type=38
it913x: Chip Version=01 Chip Type=9135
usb 2-1: dvb_usb_v2: found a 'Digital Dual TV Receiver CTVDIGDUAL_V2' in cold state
usb 2-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9137-01.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Device
it913x: Chip Version=01 Chip Type=9135
it913x: Firmware Version 204147968
usb 2-1: dvb_usb_v2: found a 'Digital Dual TV Receiver CTVDIGDUAL_V2' in warm state
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Digital Dual TV Receiver CTVDIGDUAL_V2)
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 00
it913x-fe: Tuner LNA type :38
usb 2-1: DVB: registering adapter 1 frontend 0 (Digital Dual TV Receiver CTVDIGDUAL_V2_1)...
usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Digital Dual TV Receiver CTVDIGDUAL_V2)
it913x-fe: ADF table value      :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 00
it913x-fe: Tuner LNA type :38
usb 2-1: DVB: registering adapter 2 frontend 0 (Digital Dual TV Receiver CTVDIGDUAL_V2_2)...
usb 2-1: dvb_usb_v2: 'Digital Dual TV Receiver CTVDIGDUAL_V2' successfully initialized and connected
RC part not tested

Signed-off-by: Alessandro Miceli <angelofsky1980@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-08 20:19:46 -03:00
Olivier Grenie f45f513a93 [media] dib7090p: remove the support for the dib7090E
The intend of this patch is to remove the support for the dib7090E. The
DiB7090E-package has never left prototype state and never made it to
mass-prod-state.

Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@parrot.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-22 17:15:26 -03:00
Christoph Nuscheler ed72d37a33 [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff)
The "Technisat SkyStar USB plus" is a TT-connect S-2400 clone, which the
V4L-DVB drivers already support. However, some of these devices (like
mine) come with a different USB PID 0x3009 instead of 0x3006.

There have already been patches simply overwriting the USB PID in
dvb-usb-ids.h. Of course these patches were rejected because they would
have disabled the 0x3006 PID.

This new patch adds the 0x3009 PID to dvb-usb-ids.h, and adds references
to it within the ttusb2.c driver. PID 0x3006 devices will continue to work.

The only difference between the two hardware models seems to be the
EEPROM chip. In fact, Windows BDA driver names the 0x3009 device with a
"(8 kB EEPROM)" suffix. In spite of that, the 0x3009 device works
absolutely flawlessly using the existing ttusb2 driver.

Signed-off-by: Christoph Nuscheler <christoph.nuscheler@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-13 18:05:29 -02:00
Eddi De Pieri 10a5c9148e [media] it913x: add support for Avermedia A835B
Add support for Avermedia A835B and variants.

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Cc: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-27 19:13:30 -02:00
Antonio Ospite de8ed820fd [media] m920x: add support for the VP-7049 Twinhan DVB-T USB Stick
This device was originally made by Twinhan/Azurewave[1] and sometimes
named DTV-DVB UDTT7049, it could be also found in Italy under the name
of Digicom Digitune-S[2], or Think Xtra Hollywood DVB-T USB2.0[3].
Components:
  Usb bridge: ULi M9206
  Frontend: MT352CG
  Tuner: MT2060F
The firmware can be downloaded with:
$ ./Documentation/dvb/get_dvb_firmware vp7049
[1] http://www.azurewave.com/Support_Utility_Driver.asp
[2] http://www.digicom.it/digisit/driver_link.nsf/driverprodotto?openform&prodotto=DigiTuneS
[3] http://www.txitalia.it/prodotto.asp?prodotto=txhollywooddvttv

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-27 16:36:29 -02:00
Juergen Lock e9de051666 [media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2
This just adds the usbid to the rtl28xxu driver, that's all that's
needed to make the stick work for DVB.

Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-28 09:51:22 -02:00
Oliver Schinagl d67ceb3398 [media] Support for Asus MyCinema U3100Mini Plus
This is initial support for the Asus MyCinema U3100Mini Plus. The driver
in its current form gets detected and loads properly.
Scanning using dvbscan works without problems, Locking onto a channel
using tzap also works fine. Only playback using tzap -r + mplayer was
tested and was fully functional.
It uses the af9035 USB Bridge chip, with an af9033 demodulator. The tuner
used is the FCI FC2580.

Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27 15:14:17 -03:00
Antti Palosaari c2d246d1f0 [media] rtl28xxu: Dexatek DK DVB-T Dongle [1d19:1101]
It is RTL2832U + FC2580 reference design.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23 17:13:10 -03:00
Philipp Dreimann 6d60805fd2 [media] Add the usb id of the Trekstor DVB-T Stick Terres 2.0
It needs the e4000 tuner driver.

Signed-off-by: Philipp Dreimann <philipp@dreimann.net>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-18 12:54:57 -03:00
Mauro Carvalho Chehab 3d6c2bc08a [media] dvb: move the dvb core one level up
just like the V4L2 core, move the DVB core to drivers/media, as the
intention is to get rid of both "video" and "dvb" directories.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-13 23:08:14 -03:00