Commit Graph

465 Commits

Author SHA1 Message Date
Jiri Pirko 35d4e17252 net: add netif_is_ovs_master helper with IFF_OPENVSWITCH private flag
Add this helper so code can easily figure out if netdev is openswitch.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 16:28:35 -07:00
Pravin B Shelar 6b001e682e openvswitch: Use Geneve device.
With help of tunnel metadata mode OVS can directly use
Geneve devices to implement Geneve tunnels.
This patch removes all of the OVS specific Geneve code
and make OVS use a Geneve net_device. Basic geneve vport
is still there to handle compatibility with current
userspace application.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 15:42:47 -07:00
Joe Stringer cae3a26275 openvswitch: Allow attaching helpers to ct action
Add support for using conntrack helpers to assist protocol detection.
The new OVS_CT_ATTR_HELPER attribute of the CT action specifies a helper
to be used for this connection. If no helper is specified, then helpers
will be automatically applied as per the sysctl configuration of
net.netfilter.nf_conntrack_helper.

The helper may be specified as part of the conntrack action, eg:
ct(helper=ftp). Initial packets for related connections should be
committed to allow later packets for the flow to be considered
established.

Example ovs-ofctl flows allowing FTP connections from ports 1->2:
in_port=1,tcp,action=ct(helper=ftp,commit),2
in_port=2,tcp,ct_state=-trk,action=ct(recirc)
in_port=2,tcp,ct_state=+trk-new+est,action=1
in_port=2,tcp,ct_state=+trk+rel,action=1

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 11:40:43 -07:00
Joe Stringer c2ac667358 openvswitch: Allow matching on conntrack label
Allow matching and setting the ct_label field. As with ct_mark, this is
populated by executing the CT action. The label field may be modified by
specifying a label and mask nested under the CT action. It is stored as
metadata attached to the connection. Label modification occurs after
lookup, and will only persist when the conntrack entry is committed by
providing the COMMIT flag to the CT action. Labels are currently fixed
to 128 bits in size.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 11:40:43 -07:00
Joe Stringer 182e3042e1 openvswitch: Allow matching on conntrack mark
Allow matching and setting the ct_mark field. As with ct_state and
ct_zone, these fields are populated when the CT action is executed. To
write to this field, a value and mask can be specified as a nested
attribute under the CT action. This data is stored with the conntrack
entry, and is executed after the lookup occurs for the CT action. The
conntrack entry itself must be committed using the COMMIT flag in the CT
action flags for this change to persist.

Signed-off-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 11:40:43 -07:00
Joe Stringer 7f8a436eaa openvswitch: Add conntrack action
Expose the kernel connection tracker via OVS. Userspace components can
make use of the CT action to populate the connection state (ct_state)
field for a flow. This state can be subsequently matched.

Exposed connection states are OVS_CS_F_*:
- NEW (0x01) - Beginning of a new connection.
- ESTABLISHED (0x02) - Part of an existing connection.
- RELATED (0x04) - Related to an established connection.
- INVALID (0x20) - Could not track the connection for this packet.
- REPLY_DIR (0x40) - This packet is in the reply direction for the flow.
- TRACKED (0x80) - This packet has been sent through conntrack.

When the CT action is executed by itself, it will send the packet
through the connection tracker and populate the ct_state field with one
or more of the connection state flags above. The CT action will always
set the TRACKED bit.

When the COMMIT flag is passed to the conntrack action, this specifies
that information about the connection should be stored. This allows
subsequent packets for the same (or related) connections to be
correlated with this connection. Sending subsequent packets for the
connection through conntrack allows the connection tracker to consider
the packets as ESTABLISHED, RELATED, and/or REPLY_DIR.

The CT action may optionally take a zone to track the flow within. This
allows connections with the same 5-tuple to be kept logically separate
from connections in other zones. If the zone is specified, then the
"ct_zone" match field will be subsequently populated with the zone id.

IP fragments are handled by transparently assembling them as part of the
CT action. The maximum received unit (MRU) size is tracked so that
refragmentation can occur during output.

IP frag handling contributed by Andy Zhou.

Based on original design by Justin Pettit.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Justin Pettit <jpettit@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 11:40:43 -07:00
Joe Stringer be26b9a88f openvswitch: Move MASKED* macros to datapath.h
This will allow the ovs-conntrack code to reuse these macros.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 11:40:42 -07:00
Joe Stringer 8e2fed1c0c openvswitch: Serialize acts with original netlink len
Previously, we used the kernel-internal netlink actions length to
calculate the size of messages to serialize back to userspace.
However,the sw_flow_actions may not be formatted exactly the same as the
actions on the wire, so store the original actions length when
de-serializing and re-use the original length when serializing.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 11:40:42 -07:00
Jiri Benc 61adedf3e3 route: move lwtunnel state to dst_entry
Currently, the lwtunnel state resides in per-protocol data. This is
a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa).
The xmit function of the tunnel does not know whether the packet has been
routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the
lwtstate data to dst_entry makes such inter-protocol tunneling possible.

As a bonus, this brings a nice diffstat.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:36 -07:00
Jiri Benc 7c383fb225 ip_tunnels: use tos and ttl fields also for IPv6
Rename the ipv4_tos and ipv4_ttl fields to just 'tos' and 'ttl', as they'll
be used with IPv6 tunnels, too.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:36 -07:00
Jiri Benc c1ea5d672a ip_tunnels: add IPv6 addresses to ip_tunnel_key
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the
newly introduced padding after the IPv4 addresses needs to be zeroed out.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 15:42:36 -07:00
Tom Herbert 4b048d6d9d net: Change pseudohdr argument of inet_proto_csum_replace* to be a bool
inet_proto_csum_replace4,2,16 take a pseudohdr argument which indicates
the checksum field carries a pseudo header. This argument should be a
boolean instead of an int.

Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17 21:33:06 -07:00
David S. Miller 182ad468e7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/cavium/Kconfig

The cavium conflict was overlapping dependency
changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 16:23:11 -07:00
Pravin B Shelar b2acd1dc39 openvswitch: Use regular GRE net_device instead of vport
Using GRE tunnel meta data collection feature, we can implement
OVS GRE vport. This patch removes all of the OVS
specific GRE code and make OVS use a ip_gre net_device.
Minimal GRE vport is kept to handle compatibility with
current userspace application.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 14:03:54 -07:00
Pravin B Shelar a9020fde67 openvswitch: Move tunnel destroy function to oppenvswitch module.
This function will be used in gre and geneve vport implementations.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10 14:03:54 -07:00
Wenyu Zhang e05176a328 openvswitch: Make 100 percents packets sampled when sampling rate is 1.
When sampling rate is 1, the sampling probability is UINT32_MAX. The packet
should be sampled even the prandom32() generate the number of UINT32_MAX.
And none packet need be sampled when the probability is 0.

Signed-off-by: Wenyu Zhang <wenyuz@vmware.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07 12:00:38 -07:00
Alexei Starovoitov da8b43c0e1 vxlan: combine VXLAN_FLOWBASED into VXLAN_COLLECT_METADATA
IFLA_VXLAN_FLOWBASED is useless without IFLA_VXLAN_COLLECT_METADATA,
so combine them into single IFLA_VXLAN_COLLECT_METADATA flag.
'flowbased' doesn't convey real meaning of the vxlan tunnel mode.
This mode can be used by routing, tc+bpf and ovs.
Only ovs is strictly flow based, so 'collect metadata' is a better
name for this tunnel mode.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07 11:46:34 -07:00
Glenn Griffin 3576fd794b openvswitch: Fix L4 checksum handling when dealing with IP fragments
openvswitch modifies the L4 checksum of a packet when modifying
the ip address. When an IP packet is fragmented only the first
fragment contains an L4 header and checksum. Prior to this change
openvswitch would modify all fragments, modifying application data
in non-first fragments, causing checksum failures in the
reassembled packet.

Signed-off-by: Glenn Griffin <ggriffin.kernel@gmail.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-03 14:03:08 -07:00
Thomas Graf dcc38c033b openvswitch: Re-add CONFIG_OPENVSWITCH_VXLAN
This readds the config option CONFIG_OPENVSWITCH_VXLAN to avoid a
hard dependency of OVS on VXLAN. It moves the VXLAN config compat
code to vport-vxlan.c and allows compliation as a module.

Fixes: 614732eaa1 ("openvswitch: Use regular VXLAN net_device device")
Fixes: 2661371ace ("openvswitch: fix compilation when vxlan is a module")
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29 23:03:10 -07:00
Thomas Graf 597798e438 openvswitch: Retrieve tunnel metadata when receiving from vport-netdev
Retrieve the tunnel metadata for packets received by a net_device and
provide it to ovs_vport_receive() for flow key extraction.

[This hunk was in the GRE patch in the initial series and missed the
 cut for the initial submission for merging.]

Fixes: 614732eaa1 ("openvswitch: Use regular VXLAN net_device device")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-26 21:19:11 -07:00
Nicolas Dichtel 2661371ace openvswitch: fix compilation when vxlan is a module
With CONFIG_VXLAN=m and CONFIG_OPENVSWITCH=y, there was the following
compilation error:
  LD      init/built-in.o
  net/built-in.o: In function `vxlan_tnl_create':
  .../net/openvswitch/vport-netdev.c:322: undefined reference to `vxlan_dev_create'
  make: *** [vmlinux] Error 1

CC: Thomas Graf <tgraf@suug.ch>
Fixes: 614732eaa1 ("openvswitch: Use regular VXLAN net_device device")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-26 20:56:55 -07:00
David S. Miller c5e40ee287 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/bridge/br_mdb.c

br_mdb.c conflict was a function call being removed to fix a bug in
'net' but whose signature was changed in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-23 00:41:16 -07:00
Chris J Arges bac541e463 openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes
Some architectures like POWER can have a NUMA node_possible_map that
contains sparse entries. This causes memory corruption with openvswitch
since it allocates flow_cache with a multiple of num_possible_nodes() and
assumes the node variable returned by for_each_node will index into
flow->stats[node].

Use nr_node_ids to allocate a maximal sparse array instead of
num_possible_nodes().

The crash was noticed after 3af229f2 was applied as it changed the
node_possible_map to match node_online_map on boot.
Fixes: 3af229f207

Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 22:26:03 -07:00
Thomas Graf 614732eaa1 openvswitch: Use regular VXLAN net_device device
This gets rid of all OVS specific VXLAN code in the receive and
transmit path by using a VXLAN net_device to represent the vport.
Only a small shim layer remains which takes care of handling the
VXLAN specific OVS Netlink configuration.

Unexports vxlan_sock_add(), vxlan_sock_release(), vxlan_xmit_skb()
since they are no longer needed.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 10:39:07 -07:00
Thomas Graf c9db965c52 openvswitch: Abstract vport name through ovs_vport_name()
This allows to get rid of the get_name() vport ops later on.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 10:39:07 -07:00
Thomas Graf be4ace6e6b openvswitch: Move dev pointer into vport itself
This is the first step in representing all OVS vports as regular
struct net_devices. Move the net_device pointer into the vport
structure itself to get rid of struct vport_netdev.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 10:39:07 -07:00
Thomas Graf 34ae932a40 openvswitch: Make tunnel set action attach a metadata dst
Utilize the new metadata dst to attach encapsulation instructions to
the skb. The existing egress_tun_info via the OVS_CB() is left in
place until all tunnel vports have been converted to the new method.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 10:39:06 -07:00
Thomas Graf 3093fbe7ff route: Per route IP tunnel metadata via lightweight tunnel
This introduces a new IP tunnel lightweight tunnel type which allows
to specify IP tunnel instructions per route. Only IPv4 is supported
at this point.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 10:39:06 -07:00
Thomas Graf 1d8fff9073 ip_tunnel: Make ovs_tunnel_info and ovs_key_ipv4_tunnel generic
Rename the tunnel metadata data structures currently internal to
OVS and make them generic for use by all IP tunnels.

Both structures are kernel internal and will stay that way. Their
members are exposed to user space through individual Netlink
attributes by OVS. It will therefore be possible to extend/modify
these structures without affecting user ABI.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 10:39:05 -07:00
David S. Miller 941742f497 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-06-08 20:06:56 -07:00
Jiri Benc 640b2b107c openvswitch: disable LRO
Currently, openvswitch tries to disable LRO from the user space. This does
not work correctly when the device added is a vlan interface, though.
Instead of dealing with possibly complex stacked cross name space relations
in the user space, do the same as bridging does and call dev_disable_lro in
the kernel.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03 19:39:35 -07:00
Neil McKee ccea74457b openvswitch: include datapath actions with sampled-packet upcall to userspace
If new optional attribute OVS_USERSPACE_ATTR_ACTIONS is added to an
OVS_ACTION_ATTR_USERSPACE action, then include the datapath actions
in the upcall.

This Directly associates the sampled packet with the path it takes
through the virtual switch. Path information currently includes mangling,
encapsulation and decapsulation actions for tunneling protocols GRE,
VXLAN, Geneve, MPLS and QinQ, but this extension requires no further
changes to accommodate datapath actions that may be added in the
future.

Adding path information enhances visibility into complex virtual
networks.

Signed-off-by: Neil McKee <neil.mckee@inmon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01 15:05:40 -07:00
John W. Linville 11e1fa46b4 geneve: Rename support library as geneve_core
net/ipv4/geneve.c -> net/ipv4/geneve_core.c

This name better reflects the purpose of the module.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 15:59:13 -04:00
John W. Linville 35d32e8fe4 geneve: move definition of geneve_hdr() to geneve.h
This is a static inline with identical definitions in multiple places...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 15:59:13 -04:00
Alexander Duyck 6713fc9b8f openvswitch: Use eth_proto_is_802_3
Replace "ntohs(proto) >= ETH_P_802_3_MIN" w/ eth_proto_is_802_3(proto).

Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05 19:24:42 -04:00
Linus Torvalds 6c373ca893 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...
2015-04-15 09:00:47 -07:00
David Rientjes 4167e9b2cf mm: remove GFP_THISNODE
NOTE: this is not about __GFP_THISNODE, this is only about GFP_THISNODE.

GFP_THISNODE is a secret combination of gfp bits that have different
behavior than expected.  It is a combination of __GFP_THISNODE,
__GFP_NORETRY, and __GFP_NOWARN and is special-cased in the page
allocator slowpath to fail without trying reclaim even though it may be
used in combination with __GFP_WAIT.

An example of the problem this creates: commit e97ca8e5b8 ("mm: fix
GFP_THISNODE callers and clarify") fixed up many users of GFP_THISNODE
that really just wanted __GFP_THISNODE.  The problem doesn't end there,
however, because even it was a no-op for alloc_misplaced_dst_page(),
which also sets __GFP_NORETRY and __GFP_NOWARN, and
migrate_misplaced_transhuge_page(), where __GFP_NORETRY and __GFP_NOWAIT
is set in GFP_TRANSHUGE.  Converting GFP_THISNODE to __GFP_THISNODE is a
no-op in these cases since the page allocator special-cases
__GFP_THISNODE && __GFP_NORETRY && __GFP_NOWARN.

It's time to just remove GFP_THISNODE entirely.  We leave __GFP_THISNODE
to restrict an allocation to a local node, but remove GFP_THISNODE and
its obscurity.  Instead, we require that a caller clear __GFP_WAIT if it
wants to avoid reclaim.

This allows the aforementioned functions to actually reclaim as they
should.  It also enables any future callers that want to do
__GFP_THISNODE but also __GFP_NORETRY && __GFP_NOWARN to reclaim.  The
rule is simple: if you don't want to reclaim, then don't set __GFP_WAIT.

Aside: ovs_flow_stats_update() really wants to avoid reclaim as well, so
it is unchanged.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: Jarno Rajahalme <jrajahalme@nicira.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:03 -07:00
David Miller 79b16aadea udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb().
That was we can make sure the output path of ipv4/ipv6 operate on
the UDP socket rather than whatever random thing happens to be in
skb->sk.

Based upon a patch by Jiri Pirko.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
2015-04-07 15:29:08 -04:00
David S. Miller 9f0d34bc34 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/asix_common.c
	drivers/net/usb/sr9800.c
	drivers/net/usb/usbnet.c
	include/linux/usb/usbnet.h
	net/ipv4/tcp_ipv4.c
	net/ipv6/tcp_ipv6.c

The TCP conflicts were overlapping changes.  In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.

With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 16:16:53 -04:00
Thomas Graf fa2d8ff4e3 openvswitch: Return vport module ref before destruction
Return module reference before invoking the respective vport
->destroy() function. This is needed as ovs_vport_del() is not
invoked inside an RCU read side critical section so the kfree
can occur immediately before returning to ovs_vport_del().

Returning the module reference before ->destroy() is safe because
the module unregistration is blocked on ovs_lock which we hold
while destroying the datapath.

Fixes: 62b9c8d037 ("ovs: Turn vports with dependencies into separate modules")
Reported-by: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 15:59:50 -04:00
Jiri Benc 67b61f6c13 netlink: implement nla_get_in_addr and nla_get_in6_addr
Those are counterparts to nla_put_in_addr and nla_put_in6_addr.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:58:35 -04:00
Jiri Benc 930345ea63 netlink: implement nla_put_in_addr and nla_put_in6_addr
IP addresses are often stored in netlink attributes. Add generic functions
to do that.

For nla_put_in_addr, it would be nicer to pass struct in_addr but this is
not used universally throughout the kernel, in way too many places __be32 is
used to store IPv4 address.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:58:35 -04:00
Eric W. Biederman 0c5c9fb551 net: Introduce possible_net_t
Having to say
> #ifdef CONFIG_NET_NS
> 	struct net *net;
> #endif

in structures is a little bit wordy and a little bit error prone.

Instead it is possible to say:
> typedef struct {
> #ifdef CONFIG_NET_NS
>       struct net *net;
> #endif
> } possible_net_t;

And then in a header say:

> 	possible_net_t net;

Which is cleaner and easier to use and easier to test, as the
possible_net_t is always there no matter what the compile options.

Further this allows read_pnet and write_pnet to be functions in all
cases which is better at catching typos.

This change adds possible_net_t, updates the definitions of read_pnet
and write_pnet, updates optional struct net * variables that
write_pnet uses on to have the type possible_net_t, and finally fixes
up the b0rked users of read_pnet and write_pnet.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 14:39:40 -04:00
Eric W. Biederman efd7ef1c19 net: Kill hold_net release_net
hold_net and release_net were an idea that turned out to be useless.
The code has been disabled since 2008.  Kill the code it is long past due.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-12 14:39:40 -04:00
Eric W. Biederman 7d5f41f276 mpls: Fix the openvswitch select of NET_MPLS_GSO
Fix the OPENVSWITCH Kconfig option and old Kconfigs by having
OPENVSWITCH select both NET_MPLS_GSO and MPLSO.

A Kbuild test robot reported that when NET_MPLS_GSO is selected by
OPENVSWITCH the generated .config is broken because MPLS is not
selected.

Cc: Simon Horman <horms@verge.net.au>
Fixes: cec9166ca4 mpls: Refactor how the mpls module is built
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08 19:30:06 -04:00
Joe Stringer f4f8e73850 openvswitch: Fix serialization of non-masked set actions.
Set actions consist of a regular OVS_KEY_ATTR_* attribute nested inside
of a OVS_ACTION_ATTR_SET action attribute. When converting masked actions
back to regular set actions, the inner attribute length was not changed,
ie, double the length being serialized. This patch fixes the bug.

Fixes: 83d2b9b ("net: openvswitch: Support masked set actions.")
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 14:38:57 -05:00
Pravin B Shelar 7b4577a9da openvswitch: Fix net exit.
Open vSwitch allows moving internal vport to different namespace
while still connected to the bridge. But when namespace deleted
OVS does not detach these vports, that results in dangling
pointer to netdevice which causes kernel panic as follows.
This issue is fixed by detaching all ovs ports from the deleted
namespace at net-exit.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa0aadaa5>] ovs_vport_locate+0x35/0x80 [openvswitch]
Oops: 0000 [#1] SMP
Call Trace:
 [<ffffffffa0aa6391>] lookup_vport+0x21/0xd0 [openvswitch]
 [<ffffffffa0aa65f9>] ovs_vport_cmd_get+0x59/0xf0 [openvswitch]
 [<ffffffff8167e07c>] genl_family_rcv_msg+0x1bc/0x3e0
 [<ffffffff8167e319>] genl_rcv_msg+0x79/0xc0
 [<ffffffff8167d919>] netlink_rcv_skb+0xb9/0xe0
 [<ffffffff8167deac>] genl_rcv+0x2c/0x40
 [<ffffffff8167cffd>] netlink_unicast+0x12d/0x1c0
 [<ffffffff8167d3da>] netlink_sendmsg+0x34a/0x6b0
 [<ffffffff8162e140>] sock_sendmsg+0xa0/0xe0
 [<ffffffff8162e5e8>] ___sys_sendmsg+0x408/0x420
 [<ffffffff8162f541>] __sys_sendmsg+0x51/0x90
 [<ffffffff8162f592>] SyS_sendmsg+0x12/0x20
 [<ffffffff81764ee9>] system_call_fastpath+0x12/0x17

Reported-by: Assaf Muller <amuller@redhat.com>
Fixes: 46df7b81454("openvswitch: Add support for network namespaces.")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 15:32:08 -05:00
Pravin B Shelar 26ad0b8358 openvswitch: Fix key serialization.
Fix typo where mask is used rather than key.

Fixes: 74ed7ab9264("openvswitch: Add support for unique flow IDs.")
Reported-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-14 20:20:40 -08:00
Geert Uytterhoeven 13101602c4 openvswitch: Add missing initialization in validate_and_copy_set_tun()
net/openvswitch/flow_netlink.c: In function ‘validate_and_copy_set_tun’:
net/openvswitch/flow_netlink.c:1749: warning: ‘err’ may be used uninitialized in this function

If ipv4_tun_from_nlattr() returns a different positive value than
OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS, err will be uninitialized, and
validate_and_copy_set_tun() may return an undefined value instead of a
zero success indicator. Initialize err to zero to fix this.

Fixes: 1dd144cf5b ("openvswitch: Support VXLAN Group Policy extension")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11 14:40:15 -08:00
Pravin B Shelar b35725a285 openvswitch: Reset key metadata for packet execution.
Userspace packet execute command pass down flow key for given
packet. But userspace can skip some parameter with zero value.
Therefore kernel needs to initialize key metadata to zero.

Fixes: 0714812134 ("openvswitch: Eliminate memset() from flow_extract.")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11 14:40:15 -08:00
Thomas Graf fd3137cd33 openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set
This avoids setting TUNNEL_VXLAN_OPT for VXLAN frames which don't
have any GBP metadata set. It is not invalid to set it but unnecessary.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09 14:25:52 -08:00
Pravin B Shelar ca539345f8 openvswitch: Initialize unmasked key and uid len
Flow alloc needs to initialize unmasked key pointer. Otherwise
it can crash kernel trying to free random unmasked-key pointer.

general protection fault: 0000 [#1] SMP
3.19.0-rc6-net-next+ #457
Hardware name: Supermicro X7DWU/X7DWU, BIOS  1.1 04/30/2008
RIP: 0010:[<ffffffff8111df0e>] [<ffffffff8111df0e>] kfree+0xac/0x196
Call Trace:
 [<ffffffffa060bd87>] flow_free+0x21/0x59 [openvswitch]
 [<ffffffffa060bde0>] ovs_flow_free+0x21/0x23 [openvswitch]
 [<ffffffffa0605b4a>] ovs_packet_cmd_execute+0x2f3/0x35f [openvswitch]
 [<ffffffffa0605995>] ? ovs_packet_cmd_execute+0x13e/0x35f [openvswitch]
 [<ffffffff811fe6fb>] ? nla_parse+0x4f/0xec
 [<ffffffff8139a2fc>] genl_family_rcv_msg+0x26d/0x2c9
 [<ffffffff8107620f>] ? __lock_acquire+0x90e/0x9aa
 [<ffffffff8139a3be>] genl_rcv_msg+0x66/0x89
 [<ffffffff8139a358>] ? genl_family_rcv_msg+0x2c9/0x2c9
 [<ffffffff81399591>] netlink_rcv_skb+0x3e/0x95
 [<ffffffff81399898>] ? genl_rcv+0x18/0x37
 [<ffffffff813998a7>] genl_rcv+0x27/0x37
 [<ffffffff81399033>] netlink_unicast+0x103/0x191
 [<ffffffff81399382>] netlink_sendmsg+0x2c1/0x310
 [<ffffffff811007ad>] ? might_fault+0x50/0xa0
 [<ffffffff8135c773>] do_sock_sendmsg+0x5f/0x7a
 [<ffffffff8135c799>] sock_sendmsg+0xb/0xd
 [<ffffffff8135cacf>] ___sys_sendmsg+0x1a3/0x218
 [<ffffffff8113e54b>] ? get_close_on_exec+0x86/0x86
 [<ffffffff8115a9d0>] ? fsnotify+0x32c/0x348
 [<ffffffff8115a720>] ? fsnotify+0x7c/0x348
 [<ffffffff8113e5f5>] ? __fget+0xaa/0xbf
 [<ffffffff8113e54b>] ? get_close_on_exec+0x86/0x86
 [<ffffffff8135cccd>] __sys_sendmsg+0x3d/0x5e
 [<ffffffff8135cd02>] SyS_sendmsg+0x14/0x16
 [<ffffffff81411852>] system_call_fastpath+0x12/0x17

Fixes: 74ed7ab9264("openvswitch: Add support for unique flow IDs.")
CC: Joe Stringer <joestringer@nicira.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08 00:51:14 -08:00
Jarno Rajahalme 83d2b9ba1a net: openvswitch: Support masked set actions.
OVS userspace already probes the openvswitch kernel module for
OVS_ACTION_ATTR_SET_MASKED support.  This patch adds the kernel module
implementation of masked set actions.

The existing set action sets many fields at once.  When only a subset
of the IP header fields, for example, should be modified, all the IP
fields need to be exact matched so that the other field values can be
copied to the set action.  A masked set action allows modification of
an arbitrary subset of the supported header bits without requiring the
rest to be matched.

Masked set action is now supported for all writeable key types, except
for the tunnel key.  The set tunnel action is an exception as any
input tunnel info is cleared before action processing starts, so there
is no tunnel info to mask.

The kernel module converts all (non-tunnel) set actions to masked set
actions.  This makes action processing more uniform, and results in
less branching and duplicating the action processing code.  When
returning actions to userspace, the fully masked set actions are
converted back to normal set actions.  We use a kernel internal action
code to be able to tell the userspace provided and converted masked
set actions apart.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-07 22:40:17 -08:00
Jesse Gross b8693877ae openvswitch: Add support for checksums on UDP tunnels.
Currently, it isn't possible to request checksums on the outer UDP
header of tunnels - the TUNNEL_CSUM flag is ignored. This adds
support for requesting that UDP checksums be computed on transmit
and properly reported if they are present on receive.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28 23:04:15 -08:00
Joe Stringer 74ed7ab926 openvswitch: Add support for unique flow IDs.
Previously, flows were manipulated by userspace specifying a full,
unmasked flow key. This adds significant burden onto flow
serialization/deserialization, particularly when dumping flows.

This patch adds an alternative way to refer to flows using a
variable-length "unique flow identifier" (UFID). At flow setup time,
userspace may specify a UFID for a flow, which is stored with the flow
and inserted into a separate table for lookup, in addition to the
standard flow table. Flows created using a UFID must be fetched or
deleted using the UFID.

All flow dump operations may now be made more terse with OVS_UFID_F_*
flags. For example, the OVS_UFID_F_OMIT_KEY flag allows responses to
omit the flow key from a datapath operation if the flow has a
corresponding UFID. This significantly reduces the time spent assembling
and transacting netlink messages. With all OVS_UFID_F_OMIT_* flags
enabled, the datapath only returns the UFID and statistics for each flow
during flow dump, increasing ovs-vswitchd revalidator performance by 40%
or more.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 15:45:50 -08:00
Joe Stringer 272c2cf841 openvswitch: Use sw_flow_key_range for key ranges.
These minor tidyups make a future patch a little tidier.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 15:45:50 -08:00
Joe Stringer d29ab6f8a9 openvswitch: Refactor ovs_flow_tbl_insert().
Rework so that ovs_flow_tbl_insert() calls flow_{key,mask}_insert().
This tidies up a future patch.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 15:45:49 -08:00
Joe Stringer 5b4237bbc9 openvswitch: Refactor ovs_nla_fill_match().
Refactor the ovs_nla_fill_match() function into separate netlink
serialization functions ovs_nla_put_{unmasked_key,mask}(). Modify
ovs_nla_put_flow() to handle attribute nesting and expose the 'is_mask'
parameter - all callers need to nest the flow, and callers have better
knowledge about whether it is serializing a mask or not.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26 15:45:49 -08:00
Tom Herbert af33c1adae vxlan: Eliminate dependency on UDP socket in transmit path
In the vxlan transmit path there is no need to reference the socket
for a tunnel which is needed for the receive side. We do, however,
need the vxlan_dev flags. This patch eliminate references
to the socket in the transmit path, and changes VXLAN_F_UNSHAREABLE
to be VXLAN_F_RCV_FLAGS. This mask is used to store the flags
applicable to receive (GBP, CSUM6_RX, and REMCSUM_RX) in the
vxlan_sock flags.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24 23:15:40 -08:00
Johannes Berg 053c095a82 netlink: make nlmsg_end() and genlmsg_end() void
Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.

This makes the very common pattern of

  if (genlmsg_end(...) < 0) { ... }

be a whole bunch of dead code. Many places also simply do

  return nlmsg_end(...);

and the caller is expected to deal with it.

This also commonly (at least for me) causes errors, because it is very
common to write

  if (my_function(...))
    /* error condition */

and if my_function() does "return nlmsg_end()" this is of course wrong.

Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.

Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did

-	return nlmsg_end(...);
+	nlmsg_end(...);
+	return 0;

I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.

One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18 01:03:45 -05:00
Thomas Graf 1dd144cf5b openvswitch: Support VXLAN Group Policy extension
Introduces support for the group policy extension to the VXLAN virtual
port. The extension is disabled by default and only enabled if the user
has provided the respective configuration.

  ovs-vsctl add-port br0 vxlan0 -- \
     set Interface vxlan0 type=vxlan options:exts=gbp

The configuration interface to enable the extension is based on a new
attribute OVS_VXLAN_EXT_GBP nested inside OVS_TUNNEL_ATTR_EXTENSION
which can carry additional extensions as needed in the future.

The group policy metadata is stored as binary blob (struct ovs_vxlan_opts)
internally just like Geneve options but transported as nested Netlink
attributes to user space.

Renames the existing TUNNEL_OPTIONS_PRESENT to TUNNEL_GENEVE_OPT with the
binary value kept intact, a new flag TUNNEL_VXLAN_OPT is introduced.

The attributes OVS_TUNNEL_KEY_ATTR_VXLAN_OPTS and existing
OVS_TUNNEL_KEY_ATTR_GENEVE_OPTS are implemented mutually exclusive.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 01:11:41 -05:00
Thomas Graf 81bfe3c3cf openvswitch: Allow for any level of nesting in flow attributes
nlattr_set() is currently hardcoded to two levels of nesting. This change
introduces struct ovs_len_tbl to define minimal length requirements plus
next level nesting tables to traverse the key attributes to arbitrary depth.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 01:11:41 -05:00
Thomas Graf d91641d9b5 openvswitch: Rename GENEVE_TUN_OPTS() to TUN_METADATA_OPTS()
Also factors out Geneve validation code into a new separate function
validate_and_copy_geneve_opts().

A subsequent patch will introduce VXLAN options. Rename the existing
GENEVE_TUN_OPTS() to reflect its extended purpose of carrying generic
tunnel metadata options.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 01:11:41 -05:00
Thomas Graf 3511494ce2 vxlan: Group Policy extension
Implements supports for the Group Policy VXLAN extension [0] to provide
a lightweight and simple security label mechanism across network peers
based on VXLAN. The security context and associated metadata is mapped
to/from skb->mark. This allows further mapping to a SELinux context
using SECMARK, to implement ACLs directly with nftables, iptables, OVS,
tc, etc.

The group membership is defined by the lower 16 bits of skb->mark, the
upper 16 bits are used for flags.

SELinux allows to manage label to secure local resources. However,
distributed applications require ACLs to implemented across hosts. This
is typically achieved by matching on L2-L4 fields to identify the
original sending host and process on the receiver. On top of that,
netlabel and specifically CIPSO [1] allow to map security contexts to
universal labels.  However, netlabel and CIPSO are relatively complex.
This patch provides a lightweight alternative for overlay network
environments with a trusted underlay. No additional control protocol
is required.

           Host 1:                       Host 2:

      Group A        Group B        Group B     Group A
      +-----+   +-------------+    +-------+   +-----+
      | lxc |   | SELinux CTX |    | httpd |   | VM  |
      +--+--+   +--+----------+    +---+---+   +--+--+
	  \---+---/                     \----+---/
	      |                              |
	  +---+---+                      +---+---+
	  | vxlan |                      | vxlan |
	  +---+---+                      +---+---+
	      +------------------------------+

Backwards compatibility:
A VXLAN-GBP socket can receive standard VXLAN frames and will assign
the default group 0x0000 to such frames. A Linux VXLAN socket will
drop VXLAN-GBP  frames. The extension is therefore disabled by default
and needs to be specifically enabled:

   ip link add [...] type vxlan [...] gbp

In a mixed environment with VXLAN and VXLAN-GBP sockets, the GBP socket
must run on a separate port number.

Examples:
 iptables:
  host1# iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200
  host2# iptables -I INPUT -m mark --mark 0x200 -j DROP

 OVS:
  # ovs-ofctl add-flow br0 'in_port=1,actions=load:0x200->NXM_NX_TUN_GBP_ID[],NORMAL'
  # ovs-ofctl add-flow br0 'in_port=2,tun_gbp_id=0x200,actions=drop'

[0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy
[1] http://lwn.net/Articles/204905/

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 01:11:41 -05:00
David S. Miller 3f3558bb51 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/xen-netfront.c

Minor overlapping changes in xen-netfront.c, mostly to do
with some buffer management changes alongside the split
of stats into TX and RX.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 00:53:17 -05:00
Thomas Graf 1ba398041f openvswitch: packet messages need their own probe attribtue
User space is currently sending a OVS_FLOW_ATTR_PROBE for both flow
and packet messages. This leads to an out-of-bounds access in
ovs_packet_cmd_execute() because OVS_FLOW_ATTR_PROBE >
OVS_PACKET_ATTR_MAX.

Introduce a new OVS_PACKET_ATTR_PROBE with the same numeric value
as OVS_FLOW_ATTR_PROBE to grow the range of accepted packet attributes
while maintaining to be binary compatible with existing OVS binaries.

Fixes: 05da589 ("openvswitch: Add support for OVS_FLOW_ATTR_PROBE.")
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Tracked-down-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Reviewed-by: Jesse Gross <jesse@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14 16:49:44 -05:00
Fan Du 3f4c1d87af openvswitch: Introduce ovs_tunnel_route_lookup
Introduce ovs_tunnel_route_lookup to consolidate route lookup
shared by vxlan, gre, and geneve ports.

Signed-off-by: Fan Du <fan.du@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14 16:32:06 -05:00
Jiri Pirko df8a39defa net: rename vlan_tx_* helpers since "tx" is misleading there
The same macros are used for rx as well. So rename it.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 17:51:08 -05:00
Syam Sidhardhan a440edf1fc openvswitch: Remove unnecessary version.h inclusion
version.h inclusion is not necessary as detected by versioncheck.

Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 14:31:41 -05:00
Ben Pfaff 24cc59d1eb openvswitch: Consistently include VLAN header in flow and port stats.
Until now, when VLAN acceleration was in use, the bytes of the VLAN header
were not included in port or flow byte counters.  They were however
included when VLAN acceleration was not used.  This commit corrects the
inconsistency, by always including the VLAN header in byte counters.

Previous discussion at
http://openvswitch.org/pipermail/dev/2014-December/049521.html

Reported-by: Motonori Shindo <mshindo@vmware.com>
Signed-off-by: Ben Pfaff <blp@nicira.com>
Reviewed-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 16:14:20 -05:00
Johannes Berg f8403a2e47 genetlink: pass only network namespace to genl_has_listeners()
There's no point to force the caller to know about the internal
genl_sock to use inside struct net, just have them pass the network
namespace. This doesn't really change code generation since it's
an inline, but makes the caller less magic - there's never any
reason to pass another socket.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-27 02:20:23 -05:00
Wu Fengguang 4aa6118811 openvswitch: fix odd_ptr_err.cocci warnings
net/openvswitch/vport-gre.c:188:5-11: inconsistent IS_ERR and PTR_ERR, PTR_ERR on line 189

 PTR_ERR should access the value just tested by IS_ERR

Semantic patch information:
 There can be false positives in the patch case, where it is the call
 IS_ERR that is wrong.

Generated by: scripts/coccinelle/tests/odd_ptr_err.cocci

CC: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-24 15:18:09 -05:00
Pravin B Shelar 997e068ebc openvswitch: Fix vport_send double free
Today vport-send has complex error handling because it involves
freeing skb and updating stats depending on return value from
vport send implementation.
This can be simplified by delegating responsibility of freeing
skb to the vport implementation for all cases. So that
vport-send needs just update stats.

Fixes: 91b7514cdf ("openvswitch: Unify vport error stats
handling")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23 23:57:31 -05:00
Pravin B Shelar cbe7e76d94 openvswitch: Fix GSO with multiple MPLS label.
MPLS GSO needs to know inner most protocol to process GSO packets.

Fixes: 25cd9ba0ab ("openvswitch: Add basic MPLS support to
kernel").

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23 23:57:31 -05:00
Pravin B Shelar ec449f40bb openvswitch: Fix MPLS action validation.
Linux stack does not implement GSO for packet with multiple
encapsulations.  Therefore there was check in MPLS action
validation to detect such case, But this check introduced
bug which deleted one or more actions from actions list.
Following patch removes this check to fix the validation.

Fixes: 25cd9ba0ab ("openvswitch: Add basic MPLS support to
kernel").

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reported-by: Srinivas Neginhal <sneginha@vmware.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23 23:57:31 -05:00
David S. Miller 22f10923dd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/amd/xgbe/xgbe-desc.c
	drivers/net/ethernet/renesas/sh_eth.c

Overlapping changes in both conflict cases.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10 15:48:20 -05:00
Daniel Borkmann 87545899b5 net: replace remaining users of arch_fast_hash with jhash
This patch effectively reverts commit 500f808726 ("net: ovs: use CRC32
accelerated flow hash if available"), and other remaining arch_fast_hash()
users such as from nfsd via commit 6282cd5655 ("NFSD: Don't hand out
delegations for 30 seconds after recalling them.") where it has been used
as a hash function for bloom filtering.

While we think that these users are actually not much of concern, it has
been requested to remove the arch_fast_hash() library bits that arose
from [1] entirely as per recent discussion [2]. The main argument is that
using it as a hash may introduce bias due to its linearity (see avalanche
criterion) and thus makes it less clear (though we tried to document that)
when this security/performance trade-off is actually acceptable for a
general purpose library function.

Lets therefore avoid any further confusion on this matter and remove it to
prevent any future accidental misuse of it. For the time being, this is
going to make hashing of flow keys a bit more expensive in the ovs case,
but future work could reevaluate a different hashing discipline.

  [1] https://patchwork.ozlabs.org/patch/299369/
  [2] https://patchwork.ozlabs.org/patch/418756/

Cc: Neil Brown <neilb@suse.de>
Cc: Francesco Fusco <fusco@ntop.org>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10 15:17:45 -05:00
Jiri Benc d2b2a13245 openvswitch: set correct protocol on route lookup
Respect what the caller passed to ovs_tunnel_get_egress_info.

Fixes: 8f0aad6f35 ("openvswitch: Extend packet attribute for egress tunnel info")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09 16:01:21 -05:00
Pravin B Shelar f2a01517f2 openvswitch: Fix flow mask validation.
Following patch fixes typo in the flow validation. This prevented
installation of ARP and IPv6 flows.

Fixes: 19e7a3df72 ("openvswitch: Fix NDP flow mask validation")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Reviewed-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-05 21:42:16 -08:00
David S. Miller 1459143386 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ieee802154/fakehard.c

A bug fix went into 'net' for ieee802154/fakehard.c, which is removed
in 'net-next'.

Add build fix into the merge from Stephen Rothwell in openvswitch, the
logging macros take a new initial 'log' argument, a new call was added
in 'net' so when we merge that in here we have to explicitly add the
new 'log' arg to it else the build fails.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 22:28:24 -05:00
Jiri Pirko 93515d53b1 net: move vlan pop/push functions into common code
So it can be used from out of openvswitch code.
Did couple of cosmetic changes on the way, namely variable naming and
adding support for 8021AD proto.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 14:20:18 -05:00
Jiri Pirko e21951212f net: move make_writable helper into common code
note that skb_make_writable already exists in net/netfilter/core.c
but does something slightly different.

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 14:20:17 -05:00
Jiri Pirko 5968250c86 vlan: introduce *vlan_hwaccel_push_inside helpers
Use them to push skb->vlan_tci into the payload and avoid code
duplication.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 14:20:17 -05:00
Jiri Pirko 62749e2cb3 vlan: rename __vlan_put_tag to vlan_insert_tag_set_proto
Name fits better. Plus there's going to be introduced
__vlan_insert_tag later on.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 14:20:17 -05:00
Jiri Pirko 1abcd82c20 openvswitch: actions: use skb_postpull_rcsum when possible
Replace duplicated code by calling skb_postpull_rcsum

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21 14:20:16 -05:00
Joe Stringer d3052bb5d3 openvswitch: Don't validate IPv6 label masks.
When userspace doesn't provide a mask, OVS datapath generates a fully
unwildcarded mask for the flow by copying the flow and setting all bits
in all fields. For IPv6 label, this creates a mask that matches on the
upper 12 bits, causing the following error:

openvswitch: netlink: Invalid IPv6 flow label value (value=ffffffff, max=fffff)

This patch ignores the label validation check for masks, avoiding this
error.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20 22:56:13 -05:00
Fabian Frederick f35423c137 openvswitch: use PTR_ERR_OR_ZERO
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16 14:41:39 -05:00
Jarno Rajahalme fecaef85f7 openvswitch: Validate IPv6 flow key and mask values.
Reject flow label key and mask values with invalid bits set.
Introduced by commit 3fdbd1ce11 ("openvswitch: add ipv6 'set'
action").

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-14 15:13:26 -08:00
Pravin B Shelar 8ec609d8b5 openvswitch: Convert dp rcu read operation to locked operations
dp read operations depends on ovs_dp_cmd_fill_info(). This API
needs to looup vport to find dp name, but vport lookup can
fail. Therefore to keep vport reference alive we need to
take ovs lock.

Introduced by commit 6093ae9aba ("openvswitch: Minimize
dp and vport critical sections").

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
2014-11-14 15:13:26 -08:00
Daniele Di Proietto 19e7a3df72 openvswitch: Fix NDP flow mask validation
match_validate() enforce that a mask matching on NDP attributes has also an
exact match on ICMPv6 type.
The ICMPv6 type, which is 8-bit wide, is stored in the 'tp.src' field of
'struct sw_flow_key', which is 16-bit wide.
Therefore, an exact match on ICMPv6 type should only check the first 8 bits.

This commit fixes a bug that prevented flows with an exact match on NDP field
from being installed
Introduced by commit 03f0d916aa ("openvswitch: Mega flow implementation").

Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-14 15:13:26 -08:00
Jesse Gross 856447d020 openvswitch: Fix checksum calculation when modifying ICMPv6 packets.
The checksum of ICMPv6 packets uses the IP pseudoheader as part of
the calculation, unlike ICMP in IPv4. This was not implemented,
which means that modifying the IP addresses of an ICMPv6 packet
would cause the checksum to no longer be correct as the psuedoheader
did not match.
Introduced by commit 3fdbd1ce11 ("openvswitch: add ipv6 'set' action").

Reported-by: Neal Shrader <icosahedral@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-14 15:13:26 -08:00
Pravin B Shelar ab64f16ff2 openvswitch: Fix memory leak.
Need to free memory in case of sample action error.

Introduced by commit 651887b0c2 ("openvswitch: Sample
action without side effects").

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-14 15:13:26 -08:00
Pravin B Shelar 8cd4313aa7 openvswitch: Fix build failure.
Add dependency on INET to fix following build error. I have also
fixed MPLS dependency.

ERROR: "ip_route_output_flow" [net/openvswitch/openvswitch.ko]
undefined!
make[1]: *** [__modpost] Error 1

Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14 01:24:27 -05:00
Jarno Rajahalme 05da5898a9 openvswitch: Add support for OVS_FLOW_ATTR_PROBE.
This new flag is useful for suppressing error logging while probing
for datapath features using flow commands.  For backwards
compatibility reasons the commands are executed normally, but error
logging is suppressed.

Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-09 18:58:44 -08:00
Thomas Graf 12eb18f711 openvswitch: Constify various function arguments
Help produce better optimized code.

Signed-off-by: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-09 18:58:44 -08:00
Pravin B Shelar e8eedb85bd openvswitch: Remove redundant key ref from upcall_info.
struct dp_upcall_info has pointer to pkt_key which is already
available in OVS_CB.  This also simplifies upcall handling
for gso packet.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
2014-11-09 18:58:44 -08:00
Pravin B Shelar fff06c36a2 openvswitch: Optimize recirc action.
OVS need to flow key for flow lookup in recic action. OVS
does key extract in recic action. Most of cases we could
use OVS_CB packet key directly and can avoid packet flow key
extract. SET action we can update flow-key along with packet
to keep it consistent. But there are some action like MPLS
pop which forces OVS to do flow-extract. In such cases we
can mark flow key as invalid so that subsequent recirc
action can do full flow extract.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
2014-11-09 18:58:44 -08:00
Wenyu Zhang 8f0aad6f35 openvswitch: Extend packet attribute for egress tunnel info
OVS vswitch has extended IPFIX exporter to export tunnel headers
to improve network visibility.
To export this information userspace needs to know egress tunnel
for given packet. By extending packet attributes datapath can
export egress tunnel info for given packet. So that userspace
can ask for egress tunnel info in userspace action. This
information is used to build IPFIX data for given flow.

Signed-off-by: Wenyu Zhang <wenyuz@vmware.com>
Acked-by: Romain Lenglet <rlenglet@vmware.com>
Acked-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-09 18:58:44 -08:00
Pravin B Shelar 9ba559d9ca openvswitch: Export symbols as GPL symbols.
vport can be compiled as modules, therefore openvswitch needs
to export few symbols. Export them as GPL symbols.

CC: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-09 18:58:44 -08:00
Pravin B Shelar a85311bf1f openvswitch: Avoid NULL mask check while building mask
OVS does mask validation even if it does not need to convert
netlink mask attributes to mask structure.  ovs_nla_get_match()
caller can pass NULL mask structure pointer if the caller does
not need mask.  Therefore NULL check is required in SW_FLOW_KEY*
macros.  Following patch does not convert mask netlink attributes
if mask pointer is NULL, so we do not need these checks in
SW_FLOW_KEY* macro.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Daniele Di Proietto <ddiproietto@vmware.com>
Acked-by: Andy Zhou <azhou@nicira.com>
2014-11-05 23:52:35 -08:00
Pravin B Shelar 2fdb957d63 openvswitch: Refactor action alloc and copy api.
There are two separate API to allocate and copy actions list. Anytime
OVS needs to copy action list, it needs to call both functions.
Following patch moves action allocation to copy function to avoid
code duplication.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
2014-11-05 23:52:35 -08:00
Joe Stringer 41af73e9c1 openvswitch: Move key_attr_size() to flow_netlink.h.
flow-netlink has netlink related code.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:35 -08:00
Lorand Jakab d98612b8c1 openvswitch: Remove flow member from struct ovs_skb_cb
The 'flow' memeber was chosen for removal because it's only used
in ovs_execute_actions() we can pass it as argument to this
function.

Signed-off-by: Lorand Jakab <lojakab@cisco.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:35 -08:00
Chunhe Li e1f9c356d2 openvswitch: Drop packets when interdev is not up
If the internal device is not up, it should drop received
packets. Sometimes it receive the broadcast or multicast
packets, and the ip protocol stack will casue more cpu
usage wasted.

Signed-off-by: Chunhe Li <lichunhe@huawei.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:35 -08:00
Andy Zhou cc3a5ae6f2 openvswitch: Refactor get_dp() function into multiple access APIs.
Avoid recursive read_rcu_lock() by using the lighter weight
get_dp_rcu() API. Add proper locking assertions to get_dp().

Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:34 -08:00
Joe Stringer ca7105f278 openvswitch: Refactor ovs_flow_cmd_fill_info().
Split up ovs_flow_cmd_fill_info() to make it easier to cache parts of a
dump reply. This will be used to streamline flow_dump in a future patch.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:34 -08:00
Andy Zhou 738967b8bf openvswitch: refactor do_output() to move NULL check out of fast path
skb_clone() NULL check is implemented in do_output(), as past of the
common (fast) path. Refactoring so that NULL check is done in the
slow path, immediately after skb_clone() is called.

Besides optimization, this change also improves code readability by
making the skb_clone() NULL check consistent within OVS datapath
module.

Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:34 -08:00
Jesse Gross 426cda5cc1 openvswitch: Additional logging for -EINVAL on flow setups.
There are many possible ways that a flow can be invalid so we've
added logging for most of them. This adds logs for the remaining
possible cases so there isn't any ambiguity while debugging.

CC: Federico Iezzi <fiezzi@enter.it>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:34 -08:00
Joe Stringer 1b760fb9a8 openvswitch: Remove redundant tcp_flags code.
These two cases used to be treated differently for IPv4/IPv6,
but they are now identical.

Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:34 -08:00
Pravin B Shelar 9b996e544a openvswitch: Move table destroy to dp-rcu callback.
Ths simplifies flow-table-destroy API. No need to pass explicit
parameter about context.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
2014-11-05 23:52:34 -08:00
Simon Horman 25cd9ba0ab openvswitch: Add basic MPLS support to kernel
Allow datapath to recognize and extract MPLS labels into flow keys
and execute actions which push, pop, and set labels on packets.

Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer.

Cc: Ravi K <rkerur@gmail.com>
Cc: Leo Alterman <lalterman@nicira.com>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05 23:52:33 -08:00
David S. Miller 2c6c49ded7 openvswitch: Export lockdep_ovsl_is_held to modules.
ERROR: "lockdep_ovsl_is_held" [net/openvswitch/vport-gre.ko] undefined!

Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28 17:27:23 -04:00
Simon Horman 941d8ebcf7 datapath: Rename last_action() as nla_is_last() and move to netlink.h
The original motivation for this change was to allow the helper to be used
in files other than actions.c as part of work on an odp select group
action.

It was as pointed out by Thomas Graf that this helper would be best off
living in netlink.h. Furthermore, I think that the generic nature of this
helper means it is best off in netlink.h regardless of if it is used more
than one .c file or not. Thus, I would like it considered independent of
the work on an odp select group action.

Cc: Thomas Graf <tgraf@suug.ch>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: Andy Zhou <azhou@nicira.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28 17:07:29 -04:00
Thomas Graf 62b9c8d037 ovs: Turn vports with dependencies into separate modules
The internal and netdev vport remain part of openvswitch.ko. Encap
vports including vxlan, gre, and geneve can be built as separate
modules and are loaded on demand. Modules can be unloaded after use.
Datapath ports keep a reference to the vport module during their
lifetime.

Allows to remove the error prone maintenance of the global list
vport_ops_list.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28 14:43:18 -04:00
Florian Westphal 330966e501 net: make skb_gso_segment error handling more robust
skb_gso_segment has three possible return values:
1. a pointer to the first segmented skb
2. an errno value (IS_ERR())
3. NULL.  This can happen when GSO is used for header verification.

However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL
and would oops when NULL is returned.

Note that these call sites should never actually see such a NULL return
value; all callers mask out the GSO bits in the feature argument.

However, there have been issues with some protocol handlers erronously not
respecting the specified feature mask in some cases.

It is preferable to get 'have to turn off hw offloading, else slow' reports
rather than 'kernel crashes'.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20 12:38:13 -04:00
Pravin B Shelar 25ef1328a0 openvswitch: Set flow-key members.
This patch adds missing memset which are required to initialize
flow key member. For example for IP flow we need to initialize
ip.frag for all cases.

Found by inspection.

This bug is introduced by commit 0714812134
("openvswitch: Eliminate memset() from flow_extract").

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17 23:54:02 -04:00
Pravin B Shelar f47de068f6 openvswitch: Create right mask with disabled megaflows
If megaflows are disabled, the userspace does not send the netlink attribute
OVS_FLOW_ATTR_MASK, and the kernel must create an exact match mask.

sw_flow_mask_set() sets every bytes (in 'range') of the mask to 0xff, even the
bytes that represent padding for struct sw_flow, or the bytes that represent
fields that may not be set during ovs_flow_extract().
This is a problem, because when we extract a flow from a packet,
we do not memset() anymore the struct sw_flow to 0.

This commit gets rid of sw_flow_mask_set() and introduces mask_set_nlattr(),
which operates on the netlink attributes rather than on the mask key. Using
this approach we are sure that only the bytes that the user provided in the
flow are matched.

Also, if the parse_flow_mask_nlattrs() for the mask ENCAP attribute fails, we
now return with an error.

This bug is introduced by commit 0714812134
("openvswitch: Eliminate memset() from flow_extract").

Reported-by: Alex Wang <alexw@nicira.com>
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17 16:49:34 -04:00
Li RongQing 389f48947a openvswitch: fix a use after free
pskb_may_pull() called by arphdr_ok can change skb->data, so put the arp
setting after arphdr_ok to avoid the use the freed memory

Fixes: 0714812134 ("openvswitch: Eliminate memset() from flow_extract.")
Cc: Jesse Gross <jesse@nicira.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-17 16:21:53 -04:00
Fabian Frederick 4e8febd0a7 openvswitch: use vport instead of p
All functions used struct vport *vport except
ovs_vport_find_upcall_portid.

This fixes 1 kerneldoc warning

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15 23:25:33 -04:00
Fabian Frederick 7e78cc46b7 openvswitch: kerneldoc warning fix
s/sock/gs

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-15 23:25:33 -04:00
Andy Zhou 0a5d1c55fa openvswitch: fix a sparse warning
Fix a sparse warning introduced by commit:
f579668406 (openvswitch: Add support for
Geneve tunneling.) caught by kbuild test robot:

reproduce:
  # apt-get install sparse
  #   git checkout f579668406
  #     make ARCH=x86_64 allmodconfig
  #       make C=1 CF=-D__CHECK_ENDIAN__
  #
  #
  #       sparse warnings: (new ones prefixed by >>)
  #
  #       >> net/openvswitch/vport-geneve.c:109:15: sparse: incorrect type in assignment (different base types)
  #          net/openvswitch/vport-geneve.c:109:15:    expected restricted __be16 [usertype] sport
  #             net/openvswitch/vport-geneve.c:109:15:    got int
  #             >> net/openvswitch/vport-geneve.c:110:56: sparse: incorrect type in argument 3 (different base types)
  #                net/openvswitch/vport-geneve.c:110:56:    expected unsigned short [unsigned] [usertype] value
  #                   net/openvswitch/vport-geneve.c:110:56:    got restricted __be16 [usertype] sport

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07 00:10:48 -04:00
Jesse Gross f579668406 openvswitch: Add support for Geneve tunneling.
The Openvswitch implementation is completely agnostic to the options
that are in use and can handle newly defined options without
further work. It does this by simply matching on a byte array
of options and allowing userspace to setup flows on this array.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Singed-off-by: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 00:32:21 -04:00
Jesse Gross 6b205b2ca1 openvswitch: Factor out allocation and verification of actions.
As the size of the flow key grows, it can put some pressure on the
stack. This is particularly true in ovs_flow_cmd_set(), which needs several
copies of the key on the stack. One of those uses is logically separate,
so this factors it out to reduce stack pressure and improve readibility.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 00:32:20 -04:00
Jesse Gross f0b128c1e2 openvswitch: Wrap struct ovs_key_ipv4_tunnel in a new structure.
Currently, the flow information that is matched for tunnels and
the tunnel data passed around with packets is the same. However,
as additional information is added this is not necessarily desirable,
as in the case of pointers.

This adds a new structure for tunnel metadata which currently contains
only the existing struct. This change is purely internal to the kernel
since the current OVS_KEY_ATTR_IPV4_TUNNEL is simply a compressed version
of OVS_KEY_ATTR_TUNNEL that is translated at flow setup.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 00:32:20 -04:00
Jesse Gross 67fa034194 openvswitch: Add support for matching on OAM packets.
Some tunnel formats have mechanisms for indicating that packets are
OAM frames that should be handled specially (either as high priority or
not forwarded beyond an endpoint). This provides support for allowing
those types of packets to be matched.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 00:32:20 -04:00
Jesse Gross 0714812134 openvswitch: Eliminate memset() from flow_extract.
As new protocols are added, the size of the flow key tends to
increase although few protocols care about all of the fields. In
order to optimize this for hashing and matching, OVS uses a variable
length portion of the key. However, when fields are extracted from
the packet we must still zero out the entire key.

This is no longer necessary now that OVS implements masking. Any
fields (or holes in the structure) which are not part of a given
protocol will be by definition not part of the mask and zeroed out
during lookup. Furthermore, since masking already uses variable
length keys this zeroing operation automatically benefits as well.

In principle, the only thing that needs to be done at this point
is remove the memset() at the beginning of flow. However, some
fields assume that they are initialized to zero, which now must be
done explicitly. In addition, in the event of an error we must also
zero out corresponding fields to signal that there is no valid data
present. These increase the total amount of code but very little of
it is executed in non-error situations.

Removing the memset() reduces the profile of ovs_flow_extract()
from 0.64% to 0.56% when tested with large packets on a 10G link.

Suggested-by: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 00:32:20 -04:00
Wang Sheng-Hui 8280bf00fd net/openvswitch: remove dup comment in vport.h
Remove the duplicated comment
"/* The following definitions are for users of the vport subsytem: */"
in vport.h

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 16:42:33 -04:00
David S. Miller 1f6d80358d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/mips/net/bpf_jit.c
	drivers/net/can/flexcan.c

Both the flexcan and MIPS bpf_jit conflicts were cases of simple
overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23 12:09:27 -04:00
Samuel Gauthier 9b67aa4a82 openvswitch: restore OVS_FLOW_CMD_NEW notifications
Since commit fb5d1e9e12 ("openvswitch: Build flow cmd netlink reply only if needed."),
the new flows are not notified to the listeners of OVS_FLOW_MCGROUP.

This commit fixes the problem by using the genl function, ie
genl_has_listerners() instead of netlink_has_listeners().

Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19 17:28:26 -04:00
Andy Zhou 971427f353 openvswitch: Add recirc and hash action.
Recirc action allows a packet to reenter openvswitch processing.
currently openvswitch lookup flow for packet received and execute
set of actions on that packet, with help of recirc action we can
process/modify the packet and recirculate it back in openvswitch
for another pass.

OVS hash action calculates 5-tupple hash and set hash in flow-key
hash. This can be used along with recirculation for distributing
packets among different ports for bond devices.
For example:
OVS bonding can use following actions:
Match on: bond flow; Action: hash, recirc(id)
Match on: recirc-id == id and hash lower bits == a;
          Action: output port_bond_a

Signed-off-by: Andy Zhou <azhou@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-09-15 23:28:14 -07:00
Andy Zhou 32ae87ff79 openvswitch: simplify sample action implementation
The current sample() function implementation is more complicated
than necessary in handling single user space action optimization
and skb reference counting. There is no functional changes.

Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-09-15 23:28:14 -07:00
Pravin B Shelar 8c8b1b83fc openvswitch: Use tun_key only for egress tunnel path.
Currently tun_key is used for passing tunnel information
on ingress and egress path, this cause confusion.  Following
patch removes its use on ingress path make it egress only parameter.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
2014-09-15 23:28:13 -07:00
Pravin B Shelar 83c8df26a3 openvswitch: refactor ovs flow extract API.
OVS flow extract is called on packet receive or packet
execute code path.  Following patch defines separate API
for extracting flow-key in packet execute code path.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
2014-09-15 23:28:13 -07:00
Pravin B Shelar 2ff3e4e486 openvswitch: Remove pkt_key from OVS_CB
OVS keeps pointer to packet key in skb->cb, but the packet key is
store on stack. This could make code bit tricky. So it is better to
get rid of the pointer.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-09-15 23:28:13 -07:00
Li RongQing e403aded79 openvswitch: change the data type of error status to atomic_long_t
Change the date type of error status from u64 to atomic_long_t, and use atomic
operation, then remove the lock which is used to protect the error status.

The operation of atomic maybe faster than spin lock.

Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09 11:48:07 -07:00
David S. Miller eb84d6b604 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2014-09-07 21:41:53 -07:00
Li RongQing c5eba0b6f8 openvswitch: distinguish between the dropped and consumed skb
distinguish between the dropped and consumed skb, not assume the skb
is consumed always

Cc: Thomas Graf <tgraf@noironetworks.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-03 20:50:51 -07:00
Li RongQing 4ee45ea05c openvswitch: fix a memory leak
The user_skb maybe be leaked if the operation on it failed and codes
skipped into the label "out:" without calling genlmsg_unicast.

Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02 14:01:21 -07:00
David S. Miller f9474ddfaa Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pulling to get some TIPC fixes that a net-next series depends
upon.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-23 11:12:08 -07:00
Andreea-Cristina Bernat 8c6b00c816 net/openvswitch/flow.c: Replace rcu_dereference() with rcu_access_pointer()
The "rcu_dereference()" call is used directly in a condition.
Since its return value is never dereferenced it is recommended to use
"rcu_access_pointer()" instead of "rcu_dereference()".
Therefore, this patch makes the replacement.

The following Coccinelle semantic patch was used:
@@
@@

(
 if(
 (<+...
- rcu_dereference
+ rcu_access_pointer
  (...)
  ...+>)) {...}
|
 while(
 (<+...
- rcu_dereference
+ rcu_access_pointer
  (...)
  ...+>)) {...}
)

Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 12:23:10 -07:00
Jiri Benc 2ba5af42a7 openvswitch: fix panic with multiple vlan headers
When there are multiple vlan headers present in a received frame, the first
one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the
skb beyond the VLAN TPID may be still non-linear, including the inner TCI
and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it
does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is
executed, __pop_vlan_tci pulls the next vlan header into vlan_tci.

This leads to two things:

1. Part of the resulting ethernet header is in the non-linear part of the
   skb. When eth_type_trans is called later as the result of
   OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci
   is in fact accessing random data when it reads past the TPID.

2. network_header points into the ethernet header instead of behind it.
   mac_len is set to a wrong value (10), too.

Reported-by: Yulong Pei <ypei@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 11:24:04 -07:00
Christoph Jaeger 3791b3f6fb openvswitch: Fix memory leak in ovs_vport_alloc() error path
ovs_vport_alloc() bails out without freeing the memory 'vport' points to.

Picked up by Coverity - CID 1230503.

Fixes: 5cd667b0a4 ("openvswitch: Allow each vport to have an array of 'port_id's.")
Signed-off-by: Christoph Jaeger <cj@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-13 20:04:46 -07:00
Jean Sacren 2072ec846a openvswitch: fix duplicate #include headers
The #include headers net/genetlink.h and linux/genetlink.h both were
included twice, so delete each of the duplicate.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: dev@openvswitch.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-07 16:02:57 -07:00
Thomas Graf 80019d310f net: Remove unlikely() for WARN_ON() conditions
No need for the unlikely(), WARN_ON() and BUG_ON() internally use
unlikely() on the condition.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30 17:41:47 -07:00
Himangi Saraogi d0e992aa02 openvswitch: Use IS_ERR_OR_NULL
This patch introduces the use of the macro IS_ERR_OR_NULL in place of
tests for NULL and IS_ERR.

The following Coccinelle semantic patch was used for making the change:

@@
expression e;
@@

- e == NULL || IS_ERR(e)
+ IS_ERR_OR_NULL(e)
 || ...

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-29 15:31:56 -07:00
Andy Zhou d9e0ecb814 openvswitch: Add skb_clone NULL check for the sampling action.
Fix a bug where skb_clone() NULL check is missing in sample action
implementation.

Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-07-24 09:37:22 -07:00
Simon Horman 651887b0c2 openvswitch: Sample action without side effects
The sample action is rather generic, allowing arbitrary actions to be
executed based on a probability. However its use, within the Open
vSwitch
code-base is limited: only a single user-space action is ever nested.

A consequence of the current implementation of sample actions is that
depending on weather the sample action executed (due to its probability)
any side-effects of nested actions may or may not be present before
executing subsequent actions.  This has the potential to complicate
verification of valid actions by the (kernel) datapath. And indeed
adding support for push and pop MPLS actions inside sample actions
is one case where such case.

In order to allow all supported actions to be continue to be nested
inside sample actions without the potential need for complex
verification code this patch changes the implementation of the sample
action in the kernel datapath so that sample actions are more like
a function call and any side effects of nested actions are not
present when executing subsequent actions.

With the above in mind the motivation for this change is twofold:

* To contain side-effects the sample action in the hope of making it
  easier to deal with in the future and;
* To avoid some rather complex verification code introduced in the MPLS
  datapath patch.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-07-24 09:37:21 -07:00
Andy Zhou f53e38317d openvswitch: Avoid memory corruption in queue_userspace_packet()
In queue_userspace_packet(), the ovs_nla_put_flow return value is
not checked. This is fine as long as key_attr_size() returns the
correct value. In case it does not, the current code may corrupt buffer
memory. Add a run time assertion catch this case to avoid silent
failure.

Reported-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-07-24 09:37:20 -07:00
Pravin B Shelar f6eec614d2 openvswitch: Enable tunnel GSO for OVS bridge.
Following patch enables all available tunnel GSO features for OVS
bridge device so that ovs can use hardware offloads available to
underling device.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
2014-07-24 01:15:04 -07:00
Alex Wang 5cd667b0a4 openvswitch: Allow each vport to have an array of 'port_id's.
In order to allow handlers directly read upcalls from datapath,
we need to support per-handler netlink socket for each vport in
datapath.  This commit makes this happen.  Also, it is guaranteed
to be backward compatible with previous branch.

Signed-off-by: Alex Wang <alexw@nicira.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-07-24 01:15:04 -07:00