For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC
The early console driver uses BASE_BAUD and not using dtb.
The default of 50MHz is NOT good for NPS SoC.
Signed-off-by: Noam Camus <noamca@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Today we register to plat_smp_ops.clear() method which actually
is acking the IPI.
However this is already taking care by our irqchip driver specifically
by the irq_chip.irq_eoi() method.
This is perfect timing where it should be done and no special handling
is needed at plat_smp_ops.clear().
Signed-off-by: Noam Camus <noamca@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This has caused a bunch of build failures at a few sites, with GNU
2015.12 and older as the assembler seems to need -mlock to be able to
grok llock/scond instructions for ARC700 builds.
different places since the
older tools still seem to release
of tools which most people are using seem to trip with the -mlock flag
not being passed.
This reverts commit c300547588.
Returning -EINVAL from a bool-returning function
phm_check_smc_update_required_for_display_configuration has an unexpected
effect of returning true, which is probably not what was intended.
Replace -EINVAL by false.
The only place this function is called from is
psm_adjust_power_state_dynamic in
drivers/gpu/drm/amd/powerplay/eventmgr/psm.c:106:
if (!equal || phm_check_smc_update_required_for_display_configuration(hwmgr)) {
phm_apply_state_adjust_rules(hwmgr, requested, pcurrent);
phm_set_power_state(hwmgr, &pcurrent->hardware, &requested->hardware);
hwmgr->current_ps = requested;
}
It seems to expect a boolean value here.
This issue has been found using the following Coccinelle semantic patch
written by Peter Senna Tschudin:
<smpl>
@@
identifier f;
constant C;
typedef bool;
@@
bool f (...){
<+...
* return -C;
...+>
}
</smpl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent bugfix replaced an out-of-bounds access with direct
use of unintialized data:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function 'smu7_patch_limits_vddc':
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:11: note: 'vddc' was declared here
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddci' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:17: note: 'vddci' was declared here
uint32_t vddc, vddci;
This initializes the data as before using the correct type.
Fixes: 77f7f71f5b ("drm/amdgpu/powerplay/smu7: fix static checker warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turns out that the disable_dmar_iommu() code-path tried
to get the device_domain_lock recursivly, which will
dead-lock when this code runs on dmar removal. Fix both
code-paths that could lead to the dead-lock.
Fixes: 55d940430a ('iommu/vt-d: Get rid of domain->iommu_lock')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When we iterate a master's config entries, what we generally care
about is the entry's stream map index, rather than the entry index
itself, so it's nice to have the iterator automatically assign the
former from the latter. Unfortunately, booting with KASAN reveals
the oversight that using a simple comma operator results in the
entry index being dereferenced before being checked for validity,
so we always access one element past the end of the fwspec array.
Flip things around so that the check always happens before the index
may be dereferenced.
Fixes: adfec2e709 ("iommu/arm-smmu: Convert to iommu_fwspec")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We seem to have forgotten to check that iommu_fwspecs actually belong to
us before we go ahead and dereference their private data. Oops.
Fixes: 021bb8420d ("iommu/arm-smmu: Wire up generic configuration support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We now delay installing our per-bus iommu_ops until we know an SMMU has
successfully probed, as they don't serve much purpose beforehand, and
doing so also avoids fights between multiple IOMMU drivers in a single
kernel. However, the upshot of passing the return value of bus_set_iommu()
back from our probe function is that if there happens to be more than
one SMMUv3 device in a system, the second and subsequent probes will
wind up returning -EBUSY to the driver core and getting torn down again.
Avoid re-setting ops if ours are already installed, so that any genuine
failures stand out.
Fixes: 08d4ca2a67 ("iommu/arm-smmu: Support non-PCI devices with SMMUv3")
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 32-bit ARM DMA configuration code predates the IOMMU core's default
domain functionality, and instead relies on allocating its own domains
and attaching any devices using the generic IOMMU binding to them.
Unfortunately, it does this relatively early on in the creation of the
device, before we've seen our add_device callback, which leads us to
attempt to operate on a half-configured master.
To avoid a crash, check for this situation on attach, but refuse to
play, as there's nothing we can do. This at least allows VFIO to keep
working for people who update their 32-bit DTs to the generic binding,
albeit with a few (innocuous) warnings from the DMA layer on boot.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently the ALSA proc handler allows read or write even if the proc
file were write-only or read-only. It's mostly harmless, does thing
but allocating memory and ignores the input/output. But it doesn't
tell user about the invalid use, and it's confusing and inconsistent
in comparison with other proc files.
This patch adds some sanity checks and let the proc handler returning
an -EIO error when the invalid read/write is performed.
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALSA proc handler allows currently the write in the unlimited size
until kmalloc() fails. But basically the write is supposed to be only
for small inputs, mostly for one line inputs, and we don't have to
handle too large sizes at all. Since the kmalloc error results in the
kernel warning, it's better to limit the size beforehand.
This patch adds the limit of 16kB, which must be large enough for the
currently existing code.
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 345ddcc882 ("ftrace: Have set_ftrace_pid use the bitmap like
events do") added a couple of this_cpu_read calls to the ftrace code.
On x86 this is not a problem, since it has single instructions to read
percpu data. Other architectures which use the generic variant now
have additional preempt_disable and preempt_enable calls in the core
ftrace code. This may lead to recursive calls and in result to a dead
machine, e.g. if preemption and debugging options are enabled.
To fix this use the notrace variant of preempt_disable and
preempt_enable within the generic percpu code.
Reported-and-bisected-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Fixes: 345ddcc882 ("ftrace: Have set_ftrace_pid use the bitmap like events do")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix the following warn:
fs/nfs/nfs4session.c: In function ‘nfs4_slot_seqid_in_use’:
fs/nfs/nfs4session.c:203:54: warning: ‘cur_seq’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (nfs4_slot_get_seqid(tbl, slotid, &cur_seq) == 0 &&
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
cur_seq == seq_nr && test_bit(slotid, tbl->used_slots))
~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We used to check for a valid layout type id before verifying pNFS flags
as an indicator for if we are using pNFS. This changed in 3132e49ece
with the introduction of multiple layout types, since now we are passing
an array of ids instead of just one. Since then, users have been seeing
a KERN_ERR printk show up whenever mounting NFS v4 without pNFS. This
patch restores the original behavior of exiting set_pnfs_layoutdriver()
early if we aren't using pNFS.
Fixes 3132e49ece ("pnfs: track multiple layout types in fsinfo
structure")
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
cl_rpcclient starts as ERR_PTR(-EINVAL), and connections like that
are floating freely through the system. Most places check whether
pointer is valid before dereferencing it, but newly added code
in nfs_match_client does not.
Which causes crashes when more than one NFS mount point is present.
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We need to hold the rcu_read_lock() when calling rcu_dereference(),
otherwise we can't guarantee that the object being dereferenced still
exists.
Fixes: 39e5d2df ("SUNRPC search xprt switch for sockaddr")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The current code doesn't even compile as somehow the inline assembly
can't see the register names defined as ARC_RTC_*
I'm pretty sure It worked when I first got it merged, but the tools were
definitely different then.
So better to write this in "C" anyways.
CC: stable@vger.kernel.org #4.2+
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The original syscall only used to return errno to indicate if cmpxchg
succeeded. It was not returning the "previous" value which typical cmpxchg
callers are interested in to build their slowpaths or retry loops.
Given user preemption in syscall return path etc, it is not wise to
check this in userspace afterwards, but should be what kernel actually
observed in the syscall.
So change the syscall interface to always return the previous value and
additionally set Z flag to indicate whether operation succeeded or not
(just like ARM implementation when they used to have this syscall)
The flag approach avoids having to put_user errno which is nice given
the use case for this syscall cares mostly about the "previous" value.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
- Fix build failure on compilers without asm goto
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYH+anAAoJELescNyEwWM0fiQIALprhwbhNmqc5q6IVXYJuPw7
kPonaVa1MA6EGANkBwdxD4pbkK2fcsFYsUtiSewP71TwLrRhW/2gPJGUOv3sK6Bq
BXM10O9Meu4Toy45uPofKpRk4yNhJh4WBPPYedzlwitoBUaC4R4sclioqfIOJsvv
z3UI/EXsGpgEuEKQkNHZ5PGUzQ9eLwbhexMJROsdnqVektaDrCSkVtdQNxpMsmve
yy92epfnH9xlk79KrTF1a0lM/SwlQHscua9jsOO+C4Txu6z5s2ltHVtM95Rb5X3a
nmczpMAUesL8g89AdJYOrbSO+dGbCI7ZHhXmcTnWJdRp7g2Hyhei3jNUUwfDJUA=
=GgpB
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"It's been pretty quiet on the fixes side of things for us, but Artem
reported a build failure introduced during the merge window that
appears with older GCCs that do not support asm goto. The fix is
bigger than I'd like, but it's a mechnical move of some constants to
break an include dependency between atomic.h and jump_label.h when
!HAVE_JUMP_LABEL.
Summary:
- Fix build failure on compilers without asm goto"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix circular include of asm/lse.h through linux/jump_label.h
Pull HID fixes from Jiri Kosina:
- modprobe-after-rmmod load failure bugfix for intel-ish, from Even Xu
- IRQ probing bugfix for intel-ish, from Srinivas Pandruvada
- attribute parsing fix in hid-sensor, from Ooi, Joyce
- other small misc fixes / quirky device additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: sensor: fix attributes in HID sensor interface
HID: intel-ish-hid: request_irq failure
HID: intel-ish-hid: Fix driver reinit failure
HID: intel-ish-hid: Move DMA disable code to new function
HID: intel-ish-hid: consolidate ish wake up operation
HID: usbhid: add ATEN CS962 to list of quirky devices
HID: intel-ish-hid: Fix !CONFIG_PM build warning
HID: sensor-hub: Fix packing of result buffer for feature report
Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)
v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.
v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: Luis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d53 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 767a222e47)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Norbert Preining <preining@logic.at>
Tested-by: Norbert Preining <preining@logic.at>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe7f ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a83a ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 0ef723cbce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.
v2: Move drm_device to drm_i915_private conversion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
(cherry picked from commit 9c75402418)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."
Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.
v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com
(cherry picked from commit b30ce9e055)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Petry Latvala <petri.latvala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com
(cherry picked from commit b64b540931)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.
I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.
v2: Include a commit message, include a debug message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
(cherry picked from commit e4ab73a132)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We recently refactored the Orangefs debugfs code.
The refactor seemed to trigger dan.carpenter@oracle.com's
static tester to find a possible double-free in the code.
While designing the fix we saw a condition under which the
buffer being freed could also be overflowed.
We also realized how to rebuild the related debugfs file's
"contents" (a string) without deleting and re-creating the file.
This fix should eliminate the possible double-free, the
potential overflow and improve code readability.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
An interrupt may occur right after devm_request_irq() is called and
prior to the spinlock initialization, leading to a kernel oops,
as the interrupt handler uses the spinlock.
In order to prevent this problem, move the spinlock initialization
prior to requesting the interrupts.
Fixes: e4243f13d1 (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In the eMMC 4.51 version of the spec, an EXT_CSD field called
GENERIC_CMD6_TIME[248] was added. This allows cards to specify the maximum
time it may need to move out from its busy state, when a CMD6 command has
been sent.
In cases when the card is compliant to versions < 4.51 of the eMMC spec,
obviously the core needs to use a fall-back value for this timeout, which
currently is set to 10 minutes. This value is completely in the wrong range
and importantly in some cases it causes a card initialization to take more
than 10 minute to complete.
Earlier this scenario was avoided as the mmc core used CMD13 to poll the
card, to find out when it stopped signaling busy. Commit 08573eaf1a
("mmc: mmc: do not use CMD13 to get status after speed mode switch")
changed this behavior.
Instead of reverting that commit, which would cause other issues, let's
instead start by picking a simple solution for the problem, by using a
500ms default generic CMD6 timeout.
The reason for using exactly 500ms, comes from observations that shows it's
quite common for cards to specify 250ms. 500ms is two times that value so
likely it should be enough for most cards.
Cc: <stable@vger.kernel.org> # v4.8+
Fixes: 08573eaf1a ("mmc: mmc: do not use CMD13 to get status after speed
mode switch")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
mmc_test_check_result_async() requires that struct mmc_async_req is
contained within struct mmc_test_async_req. Fix the "Commands during
non-blocking write" tests so that is the case.
Fixes: 4bbb9aac9a ("mmc: mmc_test: Add tests for sending commands during transfer")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To prevent subsequent commands failing, ensure the cmd and data circuits
are reset after a tuning timeout.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In the busy response case (i.e. !host->data), an unexpected data interrupt
would result in clearing the data command as though it had completed but
without informing the upper layers and thus resulting in a hang. Fix by
only clearing the data command for data interrupts that are expected.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
CMD line reset during an ongoing data transfer can cause the data transfer
to hang. Fix by delaying the reset until the data transfer is finished.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of
the managed version of kzalloc). Serio struct should never by managed
because it is refcounted. Doing so will lead to a double free oops on module
remove.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Fixes: e534f3e942 ("staging:nvec: Introduce the use of the managed version of kzalloc")
Cc: stable <stable@vger.kernel.org> # 3.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 36b30d6138.
This is necessary to detect paz00 (ac100) touchpad properly as one
speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't
work as the touchpad is detected as an ImPS/2 mouse instead.
Commit ec6184b1c7 changed the way
auto-detection is performed on ports marked as pass through and made the
issue apparent.
A pass through port is an additional PS/2 port used to connect a slave
device to a master device that is using PS/2 to communicate with the
host (so slave's PS/2 communication is tunneled over master's PS/2
link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a
setup (PS/2 PASS-THROUGH OPTION section).
Since paz00's embedded controller is not connected to a PS/2 port
itself, the PS/2 interface it exposes is not a pass-through one.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Fixes: 36b30d6138 ("staging: nvec: ps2: change serio type to passthrough")
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This command was sent behind serio's back and the answer to it was
confusing atkbd probe function which lead to the elantech touchpad
getting detected as a keyboard.
To prevent this from happening just let every party do its part of the
job.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Acked-by: Marc Dietrich <marvin24@gmx.de>
Cc: stable <stable@vger.kernel.org> # 3.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the device reference taken by of_find_device_by_node()
before returning from arche_platform_change_state().
Note that this code is expected to be removed, but let's fix up the leak
nonetheless.
Fixes: 886aba558b ("greybus: arche-platform: Export fn to allow...")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`ni_tio_clock_period_ps()` used to return the clock period in
picoseconds, and had a `BUG()` call for invalid cases. It was changed
to pass the clock period back via a pointer parameter and return an
error for the invalid cases. Unfortunately the code to handle
user-specified clock sources with user-specified clock period is still
returning the clock period the old way, which can lead to the caller not
getting the clock period, or seeing an unexpected error. Fix it by
passing the clock period via the pointer parameter and returning `0`.
Fixes: b42ca86ad6 ("staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a pin depending on bit 6 in SCU90 is requested for GPIO, the export
will succeed but changes to the GPIO's value will not be accepted by the
hardware. This is because the pinmux driver has misconfigured the SCU by
writing 1 to the reserved bit.
The description of SCU90[6] from the datasheet is 'Reserved, must keep
at value ”0”'. The fix is to switch pinmux from the bit-flipping macro
to explicitly configuring the .enable and .disable values to zero.
The patch has been tested on an AST2500 EVB.
Fixes: 56e57cb6c0 (pinctrl: Add pinctrl-aspeed-g5 driver)
Reported-by: Uma Yadlapati <yadlapat@us.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Early commit 30ca5cb63c ("staging: sm750fb: change definition of
PANEL_PLANE_TL fields") and 27b047bbe1 ("staging: sm750fb: change
definition of PANEL_PLANE_BR fields") modify the register bit fields
definitions. But the modifications are wrong, because the bit mask of
"bit field 10:0" is not 0xeff, but 0x7ff. The wrong definition bugs
makes display very strange.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: stable <stable@vger.kernel.org> # 4.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
variable struct usb_cdc_parsed_header h may be used
uninitialized in acm_probe.
In kernel 4.8.
/* handle quirks deadly to normal probing*/
if (quirks == NO_UNION_NORMAL)
...
goto skip_normal_probe;
}
we bypass call to
cdc_parse_cdc_header(&h, intf, buffer, buflen);
but later use h in
if (h.usb_cdc_country_functional_desc) { /* export the country data */
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Reported-by: Victor Sologoubov <victor0@rambler.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Never seen XHCI auto handoff working on TI and RENESAS cards.
Eventually, we force handoff. This code forces the handoff
unconditionally. It saves 5 seconds boot time for each card.
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This suppresses printing the error message "failed to get phy" in the
kernel log when the error is -EPROBE_DEFER. This prevents usless noise
in the kernel log.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
phy fixes:
*) Add a empty function for phy_reset when CONFIG_GENERIC_PHY is not set
*) change the phy lookup table for da8xx-usb to match it with the name
present in the board configuraion file (used for non-dt boot)
*) Fix incorrect programming sequence in w.r.t deassert of phy_rst
in phy-rockchip-pcie
*) Fix to avoid NULL pointer dereferencing error in sun4i phy
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=uTAz
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 4.9 -rc
phy fixes:
*) Add a empty function for phy_reset when CONFIG_GENERIC_PHY is not set
*) change the phy lookup table for da8xx-usb to match it with the name
present in the board configuraion file (used for non-dt boot)
*) Fix incorrect programming sequence in w.r.t deassert of phy_rst
in phy-rockchip-pcie
*) Fix to avoid NULL pointer dereferencing error in sun4i phy
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Noam Camus