This Kconfig option was removed during v4.19 development in commit
771c035372 ("deprecate the '__deprecated' attribute warnings entirely
and for good") so there's no point to keep it in defconfigs any longer.
FWIW defconfigs were patched with:
--------------------------->8----------------------
find . -name *_defconfig -exec sed -i '/CONFIG_ENABLE_WARN_DEPRECATED/d' {} \;
--------------------------->8----------------------
Link: http://lkml.kernel.org/r/20190128152434.41969-1-abrodkin@synopsys.com
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
computer vision. It also features advanced functionalities such as 360-degree,
real-time spherical stitching with multi cameras, image stabilization for
without mechanical gimbals, and rolling shutter correction. More detail is
below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips
made by Socionext and previously Matsushita/Panasonic based on their
own mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes
with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit.
For the moment, the TPU is not accessible in mainline Linux, so
we treat it as a generic Arm SoC.
More information is available at https://www.sophon.ai/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HQS8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP
optimized for computer vision. It also features advanced
functionalities such as 360-degree, real-time spherical stitching
with multi cameras, image stabilization for without mechanical
gimbals, and rolling shutter correction. More detail is below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips made
by Socionext and previously Matsushita/Panasonic based on their own
mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes with
dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit. For the moment, the
TPU is not accessible in mainline Linux, so we treat it as a generic
Arm SoC.
More information is available at
https://www.sophon.ai/"
* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
MAINTAINERS: Add entry for Bitmain SoC platform
arm64: dts: bitmain: Add Sophon Egde board support
arm64: dts: bitmain: Add BM1880 SoC support
arm64: Add ARCH_BITMAIN platform
dt-bindings: arm: Document Bitmain BM1880 SoC
We regenerated the defconfig files for samsung, shmobile, lpc18xx,
lpc32xx, omap2, and nhk8815.
Lots of additional drivers added on samsung and nhk8815,
as well as the new pl110 driver on all machines that have it.
The remaining changes are mostly to enable newly added drivers,
and in case of imx8mq together with the SoC getting merged.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=YWHu
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"We regenerated the defconfig files for samsung, shmobile, lpc18xx,
lpc32xx, omap2, and nhk8815.
Lots of additional drivers added on samsung and nhk8815, as well as
the new pl110 driver on all machines that have it.
The remaining changes are mostly to enable newly added drivers, and in
case of imx8mq together with the SoC getting merged"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: spear3xx_defconfig: Activate PL111 DRM driver
ARM: nhk8815_defconfig: Add new options
ARM: nhk8815_defconfig: Update defconfig
ARM: pxa: remove CONFIG_SND_PXA2XX_AC97 in pxa_defconfig
ARM: defconfig: integrator: Switch to DRM
arm64: defconfig: Add IMX2+ watchdog
arm64: defconfig: Enable PFUZE100 regulator
arm64: defconfig: enable NXP FlexSPI driver
arm64: defconfig: Add i.MX8MQ boot necessary configs
arm64: defconfig: add imx8qxp support
arm64: defconfig: add i.MX system controller RTC support
arm64: defconfig: Enable Tegra TCU
arm64: defconfig: Enable MAX8973 regulator
ARM: socfpga_defconfig: enable BLK_DEV_LOOP config option
ARM: defconfig: lpc32xx: enable DRM simple panel driver
ARM: defconfig: lpc32xx: enable fixed voltage regulator support
arm64: defconfig: Enable SUN6I Camera sensor interface
arm64: defconfig: Enable I2C_GPIO
ARM: omap2plus_defconfig: Update for moved options
ARM: omap2plus_defconfig: Update for dropped options
...
Add and enable the Milbeaut M10V architecture. These configs select those
of the clock, timer and serial driver for M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds the minimal defconfig for the Milbeaut M10V.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This disables the old FBDEV driver and enables the PL111
DRM driver on the SPEAr3xx.
There are some device trees in the kernel that switches
the DT node for the PL110 to "okay" but none of these
have any display defined, so we can safely switch to this
driver before we get any users starting to define
displays. Let them do it on top of the new driver
infrastructure instead.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the NHK8815 defconfig to reflect the recent
structural changes in Kconfigs all over the kernel:
- PREEMPT option was moved around
- MODULES options were moved around
- MTD_NAND options were moved around
- INPUT_MOUSEDEV doesn't have to be explicitly unselected
anymore (not on by default)
- DEBUG_GPIO should really not be in any default config
- MMC_BLOCK_BOUNCE is gone from Kconfig
- CRYPTO options were moved around
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CONFIG_SND_PXA2XX_AC97 driver is for the old AC97 bus implementation,
and conflicts with all the new-style AC97 drivers after the conversion,
so the drivers we want all get turned off.
Not disabling the symbol however does the right thing, and we get
the drivers that are selectively enabled here.
Fixes: 25540f68c8 ("ASoC: pxa: change ac97 dependencies")
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This switches the ARM Integrator to use the new PL11x DRM
driver. We need CMA enabled to get coherent allocations
at all times. The dumb VGA DAC bridge is needed for
the VGA output on the reference designs, and backlight
is needed when using an external display.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable more drivers in s5pv210 defconfig for Aries family of mobile
devices (e.g. Samsung Galaxy S).
-----BEGIN PGP SIGNATURE-----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=78iS
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.1
Enable more drivers in s5pv210 defconfig for Aries family of mobile
devices (e.g. Samsung Galaxy S).
* tag 'samsung-defconfig-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s5pv210_defconfig: Enable cpufreq
ARM: s5pv210_defconfig: Enable more drivers present on Samsung Aries
ARM: s5pv210_defconfig: Run make savedefconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
updates for 5.1, please pull the following:
- Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
devices
-----BEGIN PGP SIGNATURE-----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=uhZ9
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig file
updates for 5.1, please pull the following:
- Stefan enables the MMAL-based V4L2 camera driver for the Raspberry Pi
devices
* tag 'arm-soc/for-5.1/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable BCM2835 MMAL-based V4L2 camera driver
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
defconfig files:
* LPC18xx/LPC43xx and LPC32xx defconfig files got updates to match
savedefconfig,
* PL11x LCD controller driver on both LPC18xx/LPC43xx and LPC32xx
has been switched from fbdev to DRM one,
* drivers of GPIO controllers not found on LPC32xx boards are disabled,
* LPC32xx gets enabled additional sane debugging options: panic on oops,
sysrq, dynamic debug, timestamps in kernel log buffer and built GDB
scripts,
* LPC32xx gets enabled NFSv4 support,
* LPC32xx gets enabled a number of used drivers: DRM simple panel,
fixed voltage regulator and generic SRAM drivers,
* Option to have a serial console on HS UART on LPC32xx is enabled.
-----BEGIN PGP SIGNATURE-----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=nR4K
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-defconfig-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx into arm/defconfig
ARM: lpc32xx: defconfig updates for v5.1
Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx
defconfig files:
* LPC18xx/LPC43xx and LPC32xx defconfig files got updates to match
savedefconfig,
* PL11x LCD controller driver on both LPC18xx/LPC43xx and LPC32xx
has been switched from fbdev to DRM one,
* drivers of GPIO controllers not found on LPC32xx boards are disabled,
* LPC32xx gets enabled additional sane debugging options: panic on oops,
sysrq, dynamic debug, timestamps in kernel log buffer and built GDB
scripts,
* LPC32xx gets enabled NFSv4 support,
* LPC32xx gets enabled a number of used drivers: DRM simple panel,
fixed voltage regulator and generic SRAM drivers,
* Option to have a serial console on HS UART on LPC32xx is enabled.
* tag 'lpc32xx-defconfig-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: defconfig: lpc32xx: enable DRM simple panel driver
ARM: defconfig: lpc32xx: enable fixed voltage regulator support
ARM: defconfig: lpc32xx: disable superfluous GPIO controllers
ARM: defconfig: lpc32xx: enable generic SRAM driver
ARM: defconfig: lpc32xx: enable serial console on HS UART
ARM: defconfig: lpc32xx: enable panic on oops option
ARM: defconfig: lpc32xx: enable build options for basic debugging
ARM: defconfig: lpc32xx: enable NFSv4 support
ARM: defconfig: Switch LPC32xx to use PL11x DRM driver
ARM: defconfig: Update LPC32xx defconfig
ARM: defconfig: Switch LPC18xx to use PL11x DRM driver
ARM: defconfig: Update LPC18xx defconfig
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
-----BEGIN PGP SIGNATURE-----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=8/bA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig
Renesas ARM Based SoC Defconfig Updates for v5.1
shmobile and multi_v7 defconfig
* Enable support for recently upstreamed RZ/A2 (r7s9210) SoC
* Enable NXP pcf85363 RTC which is used on RZ/G1C (r8a77470) based iWave SBC
shmobile defconfig
* Refresh for changes present in v5.0-rc1
* tag 'renesas-arm-defconfig-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Enable support for RZ/A2
ARM: shmobile: defconfig: Refresh for v5.0-rc1
ARM: multi_v7_defconfig: Enable NXP pcf85363 rtc
ARM: shmobile: Enable NXP pcf85363 rtc in shmobile_defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop PROVE_LOCKING as it should not be enabled in the defconfig. It
causes quite a bit overhead as noted in the patch description.
Then let's update omap2plus_defconfig for dropped options and moved
options. That way makesavedefconfig can actually be used to generate
patches against omap2plus_defconfig.
-----BEGIN PGP SIGNATURE-----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=Cia+
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps
Drop PROVE_LOCKING as it should not be enabled in the defconfig. It
causes quite a bit overhead as noted in the patch description.
Then let's update omap2plus_defconfig for dropped options and moved
options. That way makesavedefconfig can actually be used to generate
patches against omap2plus_defconfig.
* tag 'omap-for-v5.1/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for moved options
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: remove PROVE_LOCKING from defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Phytec phyCORE-LPC3250 board is equipped with a Sharp LQ035Q7DB03
3.5" QVGA TFT panel, enable simple panel device driver to get it
supported in the kernel image by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Fixed voltage regulators are found on Phytec phyCORE-LPC3250 board,
enable the correspondent device driver by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
These options have just moved around, let's update with make
savedefconfig to make patching the file easier.
Signed-off-by: Tony Lindgren <tony@atomide.com>
PROVE_LOCKING enables LOCKDEP, which causes big overhead on cache and
bus transactions.
On some ARM big.LITTLE architecutres (Exynos 5433) the overhead is really big.
The overhead can be measures using hackbench which will speed up
by x3 times (11sec -> 3.4sec).
When you check transaction on cache or buses, the results are way higher
than normal for the same hackbench test:
L1d cache invalidations: 26mln vs 4mln
L2u cache invalidations: 42mln vs 12mln
bus cyc/access: 30cyc/access vs. 20cyc/access
context switch is x3 times cheaper
Enable this option only when you have some locking issue to investigate.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the base GCC plugin support symbol CONFIG_GCC_PLUGINS for
multi_v7_defconfig so that builds hosted on systems that have a
supported version of GCC along with the prerequisite headers will
allow GCC plugins to be used during the build. At the moment, this
will also enable the ARM per-task stack protector plugin, since
all its remaining Kconfig dependencies are fulfilled by default.
At the same time, enable the structleak plugin. This plugin ensures
that local struct type variables are fully initialized, preventing
inadvertent leaks of kernel state if such variables are shared with
userland. This is a reasonable transformation to apply by default,
since it does not adversely affect performance, and does not affect
GCC compiler diagnostics regarding the use of uninitialized local
variables.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This switches the ARMv7 defconfig away from the old
fbdev driver to the new DRM driver. All machines are
now supported by the new driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The defconfig for the AXM55xx includes the ARM CLCD
(PL11x) PrimeCell framebuffer driver, but the device tree
for this platform does not include this hardware, nor do I
find it likely that this chip has graphics.
Drop these config items.
Cc: John Logan <john.logan@intel.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The change disables a list of GPIO controllers, which to the best
knowledge are not found on any supported NXP LPC32xx powered board.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
NXP LPC32xx SoCs contain an IRAM area, which is supported by
the generic MMIO SRAM driver, enable the driver to be built
by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
It is possible to configure NXP LPC32xx powered boards to have
serial consoles on HS UARTs, enable this option by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
To make a default built kernel image more advanced include support
of sysrq, dynamic debug, GDB scripts and printed timestamps in
kernel log buffer by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
None of the LPC32xx device trees contains any display settings,
it just defines a device tree node for the CLCD (PL11x) left
as "disabled" on lpc3250-ea3250 and "okay" on lpc3250-phy3250
but no panels are attached on any device tree, so the driver
will simply bail out.
I conclude that the hardware is dormant on existing
systems, so we can without any problems switch the defconfig
over from the old ARMCLCD frame buffer driver to the new
PL11x DRM driver.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[vzapolskiy: deselected I2C as selected by DRM; fixed SoC name]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
This simply updates the LPC32xx defconfig against the current
Kconfig structure in the kernel so we can make changed to the
defconfig without disturbing noise.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
None of the LPC18xx device trees contains any display settings,
it just defines a device tree node for the CLCD (PL11x) set
as "disabled" and no panels are attached on any device tree.
This I conclude that the hardware is dormant on existing
systems, so we can without any problems switch the defconfig
over from the old ARMCLCD frame buffer driver to the new
PL11x DRM driver.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[vzapolskiy: deselected I2C build option as selected by DRM]
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Enable support for the RZ/A2 SoC, including pin control, now the DTS for
the Renesas RZ/A2M evaluation board is included.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Enable support for the RZ/A2 SoC, including pin control, now the DTS for
the Renesas RZ/A2M evaluation board is included.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This simply updates the LPC18xx defconfig against the current
Kconfig structure in the kernel so we can make changed to the
defconfig without disturbing noise.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Enable cpufreq drivers for all S5Pv210 devices.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable following drivers for Samsung Aries family of devices:
- I2C support (using s3c2410 driver)
- s5p-jpeg
- s5p-mfc
- Exynos DRM rotator
- PWM support
- PWM vibrator
- Fixed regulator
- Syscon poweroff
- Atmel maXTouch touchscreen
- Broadcom BCM4329 Bluetooth over UART0
- DMA devices (so we can use pl330 DMA driver)
Disable DEBUG_LL. It's currently set to UART1, but if we want to use it
on Aries, we would need to switch it to UART2, to get any logs.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Run savedefconfig to cleanup the config and prepare for enabling more
drivers for Samsung Aries based devices.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
These boards are now fully ported to device-tree, so the old implementation
can go away.
The defconfig needs downstream quirks anyway, so we can just remove it from
mainline.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase
hardware support enable the driver in the multi_v7_defconfig
multiplatform configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The iWave RZ/G1C SBC supports RTC (NXP pcf85263). To increase hardware
support enable the driver in the shmobile_defconfig multiplatform
configuration.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a build
fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
GPU, 256MB RAM, Wifi). This includes some acked platform-specific
drivers (serial, etc). This also include DTs for two boards with this
SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwv4lAPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3JQsQAIcvwnI8rKPEskd20kNaj5bCUlG2hcIN/VoT
scq1iCXpICOF53jBQvDoe48n+Ji4mI2VD7AIZD8XVppR+aHgpy8fkjX+uz8Ap0dG
8B2y9vJ6nomrxKslnFEUk6LxpsaadpzTQDlcHAQvPdJxkvmMuA2b8LMGZhoAQ+dB
lCw/qbjmoMEAV+dKXqRu62wwjZ10j4B7ex1XB1gnfjJYy+Splnd5fkdFCvd3wk+7
BOH2iGROyLC0TC6ggqv45NNm6EykO9XqI5nq/3VHq9aBVJVWtFUQhDScjNf6qyYM
mvUg6ZxmiTyIjhN+erttFXtxSKCH0BIdlBLZzaQ9W2XbTKMgzUlgK5GjQGqKCG6A
QZHs9oe/TQuaHZ2ghMRbxcTWZC8Zdi1hYYa8fB7yNCZKnPNLRaA5P7O/3/s796B6
DXpIHlU4lpyRdg26Zxh+FXYIXLsUYk9WNcwhjFbUQ/WXP3L9qf7FUU1EeSQeGDHU
yRCE+kuKFs5FJnAZYXQ+0BCv0v8GFLMKTXDTbYtVFt0QDWVeeWwRt6gCOcHv1vBI
IbZ0QLn1fzW2efgsXXB9i9VXO5AiP3EMx2A9Lqvrv+ufRXzQlBPbYZhN/Lp+BuDC
moWdT5Cmye00uu35wY6H7Ycd+CO29dJ/B+hKbgqjyzFkZJiwWnPoeVQH2M1IkjOj
IydIEbEo
=qgZw
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
Enable the UniPhier MIO DMAC driver. This is used as the DMA engine
for accelerating the SD/eMMC controller drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Most changes here are to enable new drivers and platforms in the various
configs that affect them. Most of these have been covered and described
in the other branches, we mostly keep defconfig separate to avoid
conflicts between SoC/dt/driver updates that they otherwise would be
grouped with.
One thing worth mentioning here is that OMAP changes from using their
own UART driver, to 8250, for the multi_v7_defconfig shared config on
32-bit. This means that the console is now named ttyS* instead of ttyO*.
This change was already done for omap2_defconfig a while back, so most
users of these configs have either already updated, or can easily follow
the same patterns as they did at that time. This makes platform support
slightly easier for distros, since they no longer need to keep track of
a separate console prefix for these platforms.
-----BEGIN PGP SIGNATURE-----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=65qL
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Most changes here are to enable new drivers and platforms in the
various configs that affect them. Most of these have been covered and
described in the other branches, we mostly keep defconfig separate to
avoid conflicts between SoC/dt/driver updates that they otherwise
would be grouped with.
One thing worth mentioning here is that OMAP changes from using their
own UART driver, to 8250, for the multi_v7_defconfig shared config on
32-bit. This means that the console is now named ttyS* instead of
ttyO*. This change was already done for omap2_defconfig a while back,
so most users of these configs have either already updated, or can
easily follow the same patterns as they did at that time. This makes
platform support slightly easier for distros, since they no longer
need to keep track of a separate console prefix for these platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"
arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO
arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE
arm64: defconfig: Regenerate for v4.20
ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: multi_v7_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: exynos_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers
ARM: imx_v6_v7_defconfig: add imx7ulp support
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers
arm64: defconfig: Enable GCC and PINCTRL for MSM8998
arm64: defconfig: Enable core Qualcomm SDM845 options
ARM: defconfig: Enable the PL111 DRM driver on vexpress
ARM: defconfig: Update the vexpress defconfig
arm64: defconfig: Enable some qcom remoteproc configs
arm64: defconfig: Enable QCS404 configs
ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
ARM: imx_v6_v7_defconfig: Enable BT_BNEP
...
Use the new options for default audio support.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Alexey Brodkin