Width/height and 4CC formats are expressed using u32 types everywhere,
let's fix the v4l2_fill_pixfmt[_mp]() prototypes to do the same.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit b6c96e1568 inadvertently also dropped the 'msg->len > 1' test
from the preceding sanity check. This caused compliance test failures.
Fixes: b6c96e1568 ("media: cec: allow any initiator for Ping and Image/Text View On")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
if saa7164_proc_create() fails, saa7164_fini() will trigger a warning,
name 'saa7164'
WARNING: CPU: 1 PID: 6311 at fs/proc/generic.c:672 remove_proc_entry+0x1e8/0x3a0
? remove_proc_entry+0x1e8/0x3a0
? try_stop_module+0x7b/0x240
? proc_readdir+0x70/0x70
? rcu_read_lock_sched_held+0xd7/0x100
saa7164_fini+0x13/0x1f [saa7164]
__x64_sys_delete_module+0x30c/0x480
? __ia32_sys_delete_module+0x480/0x480
? __x64_sys_clock_gettime+0x11e/0x1c0
? __x64_sys_timer_create+0x1a0/0x1a0
? trace_hardirqs_off_caller+0x40/0x180
? do_syscall_64+0x18/0x450
do_syscall_64+0x9f/0x450
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix it by checking the return of proc_create_single() before
calling remove_proc_entry().
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 0444 instead of S_IRUGO]
[hverkuil-cisco@xs4all.nl: use pr_info instead of KERN_INFO]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
You can't memset the contents of a __user pointer. Instead, call copy_to_user to
copy links.reserved (which is zeroed) to the user memory.
This fixes this sparse warning:
SPARSE:drivers/media/mc/mc-device.c drivers/media/mc/mc-device.c:521:16: warning: incorrect type in argument 1 (different address spaces)
Fixes: f49308878d ("media: media_device_enum_links32: clean a reserved field")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The reserved field array for struct media_link_desc has length 2, not 4.
And the reserved field array of struct media_links_enum was never documented
at all.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The call to of_find_device_by_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:60:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function.
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:63:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function.
drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c:72:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 38, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/media/platform/mtk-vpu/mtk_vpu.c:477:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 464, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As we did a major change on this file, let's take the moment
to cleanup several coding style issues on it.
This patch was partially done with the help of two tools:
./scripts/checkpatch.pl --fix-inplace --strict
astyle --indent=tab=8 --style=linux
But manually adjusted in order to fit our style.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As this driver had a major change, let's take the opportunity
and do some coding style cleanup, in order to make it compliant
with Kernel's style.
This patch was partially done with the help of two tools:
./scripts/checkpatch.pl --fix-inplace --strict
astyle --indent=tab=8 --style=linux
But manually adjusted in order to fit our style.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This is a new file, so the best moment to make it to follow
Kernel coding style is now.
This patch was partially generated with:
./scripts/checkpatch.pl --fix-inplace --strict -f drivers/media/usb/dvb-usb/cxusb-analog.c
And manually checked and adjusted to avoid any warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sparse complains about two issues when building with i386
and COMPILE_TEST:
drivers/staging/media/allegro-dvt/allegro-core.c:1849:36: warning: constant 0xffffffff00000000UL is so big it is unsigned long long
drivers/staging/media/allegro-dvt/allegro-core.c:865:24: error: incompatible types in comparison expression (different type sizes)
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
nal-h264.h is a local header, not a global one. Use "" instead of <>.
Fixed this compile error:
CC drivers/staging/media/allegro-dvt/nal-h264.o
drivers/staging/media/allegro-dvt/nal-h264.c:24:10: fatal error: nal-h264.h: No such file or directory
#include <nal-h264.h>
^~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In vb2_vmalloc_get_userptr() the framevector is created with the
'write' argument set to false when vb2_create_framevec() is called
for OUTPUT buffers. So the pages are marked as read-only.
However, userspace will write to these buffers since it will fill
in the data to output. Since get_userptr is only called if the userptr
of the queued buffer has changed since the last time that same buffer
was queued, this will fail when the buffer contents is updated and the
buffer is queued again.
E.g., userspace fills buffer 1 with the output video and queues it.
The first time get_userptr is called and the pages are grabbed and
pinned in memory and marked read-only. The second time buffer 1 is
filled with different video data and queued again. Since the userptr
hasn't changed the get_userptr() callback isn't called again. Since
the pages were marked as read-only the new contents isn't updated.
Just always call vb2_create_framevec() with FOLL_WRITE to always
allow writing to the buffers.
Using USERPTR streaming with OUTPUT devices is almost never done. And
when it is done it is via v4l2-compliance and a driver like vim2m. But
since v4l2-compliance doesn't actually inspect the capture buffer and
compare it to the original output buffer, this issue was never noticed.
But the vicodec driver actually needs to parse the bitstream in the
OUTPUT buffers and any errors there will be immediately noticed. So
this time v4l2-compliance failed the USERPTR streaming test.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The allegro hardware encoder does not write SPS/PPS nal units into the
encoded video stream. Therefore, we need to write the units in software.
The implementation follows Rec. ITU-T H.264 (04/2017) to allow to
convert between a C struct and the RBSP representation of the SPS and
PPS nal units.
The allegro driver writes the nal units into the v4l2 capture buffer in
front of the actual video data which is written at an offset by the IP
core. The remaining gap is filled with a filler nal unit.
[hverkuil-cisco@xs4all.nl: added missing @dev description for nal_h264_read_sps()]
[mchehab+samsung@kernel.org: removed uneeded "-ccflags-y $(src)" from Makefile]
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add a V4L2 mem-to-mem driver for Allegro DVT video IP cores as found in
the EV family of the Xilinx ZynqMP SoC. The Zynq UltraScale+ Device
Technical Reference Manual uses the term VCU (Video Codec Unit) for the
encoder, decoder and system integration block.
This driver takes care of interacting with the MicroBlaze MCU that
controls the actual IP cores. The IP cores and MCU are integrated in the
FPGA. The xlnx_vcu driver is responsible for configuring the clocks and
providing information about the codec configuration.
The driver currently only supports the H.264 video encoder.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add vendor prefix for Allegro DVT, a provider of H.264/AVC, H.265/HEVC,
AVS2, VP9 and AV1 compliance test suites and H.264/AVC, H.265/HEVC, and
VP9 encoder, codec and decoder hardware (RTL) IPs.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add device-tree bindings for the Allegro DVT video IP core found on the
Xilinx ZynqMP EV family.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
last_buffer_dequeued was set to true in __fill_v4l2_buffer, but this
is called for qbuf as well. Move it to vb2_dqbuf.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Introduce some basic H264 decoding support in cedrus. So far, only the
baseline profile videos have been tested, and some more advanced features
used in higher profiles are not even implemented.
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The H264_SLICE_RAW format introduced before is meant for stateless
decoders that will need the H264 parsed slice data without the start code.
Let's document it.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The H264_SLICE_RAW format is meant to hold the parsed slice data without
the start code. This will be needed by stateless decoders.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Stateless video codecs will require both the H264 metadata and slices in
order to be able to decode frames.
This introduces the definitions for the structures used to pass the
metadata from the userspace to the kernel.
[hverkuil-cisco@xs4all.nl: add space after . in ".For"]
[hverkuil-cisco@xs4all.nl: sync v4l2_ctrl_h264_decode_params struct layout with header]
Co-developed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Some VPU variants may run at higher clock speeds. They actually need
extra speed to be capable of decoding more complex codecs like HEVC or
bigger image sizes (4K).
Expand variant structure with mod_rate information.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use v4l2_m2m2_buf_copy_metadata to let BIT encoder contexts copy buffer
field, timestamp, timestamp flags, and optionally timecode.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
coda_command_sync, coda_hw_reset, and __coda_start_decoding
all expect to be called under the coda_mutex device lock.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The MPEG-2 decoder firmware reports profile and level indication that
can be used to set V4L2 MPEG-2 profile and level controls
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add MPEG-2 CID definitions for profiles and levels defined in ITU-T Rec.
H.262.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The MPEG-4 decoder firmware reports profile and level indication values
that can be used to update V4L2 MPEG-4 profile and level controls.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds raw (unprocessed) BT.656 stream capturing support for the analog
part of Medion 95700.
It can be enabled by setting CXUSB_EXTENDEDMODE_CAPTURE_RAW flag in
parm.capture.extendedmode passed to VIDIOC_S_PARM.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch adds support for analog part of Medion 95700 in the cxusb
driver.
What works:
* Video capture at various sizes with sequential fields,
* Input switching (TV Tuner, Composite, S-Video),
* TV and radio tuning,
* Video standard switching and auto detection,
* Radio mode switching (stereo / mono),
* Unplugging while capturing,
* DVB / analog coexistence.
What does not work yet:
* Audio,
* VBI,
* Picture controls.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: remove left-over commented-out debug message]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch prepares cxusb driver for supporting the analog part of
Medion 95700 (previously only the digital - DVB - mode was supported).
Specifically, it adds support for:
* switching the device between analog and digital modes of operation,
* enforcing that only one mode is active at the same time due to hardware
limitations.
Actual implementation of the analog mode will be provided by the next
commit.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
According to V4L2 API set_fmt subdev operation should not return an error
on out-of-range picture sizes, the values should be clamped instead to the
supported range.
The cx25840 datasheet says that the chip is capable of scaling down the
picture width and height, respectively, 16 and 8 times.
These values agree with what the old implementation enforced.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This commit adds pin to pad mapping and output format configuration support
in CX2584x-series chips to cx25840 driver.
This functionality is then used to allow disabling ivtv-specific hacks and
configuration values (called a "generic mode"), so cx25840 driver can be
used for other devices not needing them without risking compatibility
problems.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This commit implements g_std operation in cx25840 driver by returning the
last set video standard.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
cx25840 driver g_std operation queries the currently detected video signal,
however this is what querystd operation should do, so let's rename the
handler.
None of the existing cx25840 driver users ever called the g_std operation,
one of them calls querystd on each of its subdevs but then the result is
only used to implement VIDIOC_QUERYSTD (as it should).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
cx25840_load_fw() does the same thing as cx25840_reset(), only keeps
"is_initialized" flag so any further invocation of this function besides
the first one is a NOP.
Let's just call cx25840_reset() directly from cx25840_load_fw() instead of
open coding it there.
While we are at it, let's also improve comments about cx25840_load_fw()
so they are current and in the proper style (one of them even referred to a
non-existing cx25840 init operation).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
imx7_csi_enable() always return 0 and its return value is never checked,
so convert it to void.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Remove unneeded 'break' right after the 'return' statement as
pointed out by checkpatch.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In the case of devm_request_irq() failure, let's propagate the real error
code instead of a fake one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In the case of platform_get_irq() failure, let's propagate the real error
code instead of a fake one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use devm_platform_ioremap_resource() to simplify the code a bit.
While at it, propagate the real error value in case of
devm_platform_ioremap_resource() failure.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As per the i.MX7D Reference Manual only the MCLK is used for
the CSI block, so only handle this single clock.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The media device is already available via multiple methods, there is no
need to set driver data for v4l2_dev to the media device.
In imx_media_link_notify(), get media device from link->graph_obj.mdev.
In imx_media_capture_device_register(), get media device from
v4l2_dev->mdev.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Export find_pipeline_pad(), renaming to imx_media_pipeline_pad(), and
extend its functionality to allow searching for video devices in the
enabled pipeline in addition to sub-devices.
As part of this:
- Rename imx_media_find_mipi_csi2_channel() to
imx_media_pipeline_csi2_channel().
- Remove imx_media_find_upstream_pad(), it is redundant now.
- Rename imx_media_find_upstream_subdev() to imx_media_pipeline_subdev()
with an additional boolean argument for searching upstream or downstream.
- Add imx_media_pipeline_video_device() which is analogous to
imx_media_pipeline_subdev() but searches for video devices.
- Remove imxmd pointer arg from all of the functions above, it was
never used in those functions. With that change the i.MX5/6 CSI,
VDIC, and IC sub-devices no longer require the media_device.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Re-organize modules, and which objects are linked into those modules, so
that:
- imx6-media (renamed from imx-media) is the media driver module for
imx5/6 only, and has no symbol exports.
- imx6-media-csi (renamed from imx-media-csi) is the subdev driver
module for imx5/6 CSI. It is now linked direcly with imx-media-fim,
since only the imx5/6 CSI makes use of the frame interval monitor.
- imx-media-common now only contains common code between imx5/6 and imx7
media drivers. It contains imx-media-utils, imx-media-of,
imx-media-dev-common, and imx-media-capture. In order to acheive that,
some functions common to imx5/6 and imx7 have been moved out of
imx-media-dev.c and into imx-media-dev-common.c.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Don't propagate the source pad format to the connected capture device.
It's now the responsibility of userspace to call VIDIOC_S_FMT on the
capture device to ensure the capture format and compose rectangle
are compatible with the connected source. To check this, validate
the capture format with the source before streaming starts.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Revert this commit, as imx_media_capture_device_set_format() will be
removed. The arguments to mx_media_mbus_fmt_to_pix_fmt() and
imx_media_capture_device_set_format() in imx7_csi_set_fmt() are also
reverted.
This reverts commit 5964cbd869.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Move imx_media_add_video_device() into imx_media_capture_device_register().
Also the former has no error conditions to convert to void.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Allocate and free a DMA coherent buffer in imx_media_alloc/free_dma_buf()
from the given device. This allows DMA alloc and free using a device
that is backed by real hardware, which for the imx5/6/7 CSI is the CSI
unit, and for the internal IPU sub-devices, is the parent IPU.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon