mirror of https://gitee.com/openkylin/linux.git
1538 Commits
Author | SHA1 | Message | Date |
---|---|---|---|
Martin Schwidefsky | 0244ad004a |
Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
|
Linus Torvalds | 0e6a1fb116 |
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King: "Just two fixes here - one for the recent addition of Neon stuff which causes problems when this is built as a module. The other was one spotted by Olof with the fixed-HZ stuff. Last patch (which is at the very top) is not a fix per-se, but an almost-end-of-merge window sorting of the select symbols in arch/arm/Kconfig to keep them as akpm would like to reduce unnecessary conflicts. I've also taken the liberty this time to add a comment at the end to discourage the endless "add the next select to the bottom of a nicely sorted list" syndrome" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: sort arch/arm/Kconfig ARM: fix forced-HZ values ARM: 7835/2: fix modular build of xor_blocks() with NEON enabled |
|
Russell King | 171b3f0da7 |
ARM: sort arch/arm/Kconfig
Keep arch/arm/Kconfig select statements sorted alphabetically. I've added a comment at the bottom of the main bank for CONFIG_ARM to this effect so hopefully this will keep things more in order. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Russell King | 47d846827e |
ARM: fix forced-HZ values
Olof Johansson reports that the tests against HZ_FIXED seem non-functional. Fix this by using '0' as a sentinel for "not specified" and test against that instead. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Linus Torvalds | 6404141718 |
ARM: SoC late changes for v3.12
These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJSLkf1AAoJEFk3GJrT+8ZlF7oP/AyxrdRFyC1YmuOqzFH0/JTQ EVBmMBiH+f1IKBT6YRkWCzX4JI5oOi+2DhrM6d/UPfbpr6pwd8dptuPiyLuBBUEm byNbiJEYHidm23oFpKM+89tTHXbBrrz8XQN2xLwYhNr24QkVAsLTxyOjVA7KJM59 tk1tPQzO1ORyiFd485eQa3V4z98JgcE3QFNthbS7Y72wEXBzMZQDc9nFaoIJ5mHW nzJSZyV24ibeEJeM2nsc7a3OvCyUfAQaO5Cio2UvdkGzZcmtxjxc1LjHa4VjIL6h hwz+gqIOfl3hXotbjJxTp9+Ezt4TGU5bB3NUweE1btHE/KIEu0bx4hSsOz/kooA9 2JL8BCCTx+KiGiNHmNCcT679n9q11iOwqOWvxxhcJFkiV/6+mkjwTD9TNwR1q+RG +LtOZr9tMcu2v/DbAivDYKiROmNCZhxpn35DoUKpBy73SOvJOiTLtSYitVN/tyM3 nWLEP5aTf3NwrWr8nFFws6ycwhgTCX0ITbdFD/fMlLMamHYPkckJ/0NXXOxfGiLk kCMbdrCX4YTbCftmAQhrbdaPJVnE/SZI3CTJfutj8eX6NC2fm/U7Hcf5PI+W0Igd moN/PaUULpVZI5hUrADyU1HCQnA97pv0biYVwzW5pBIt2u9tzUritabuERxPt9fa SdHj0+u+xq9d3y35Oq46 =NIZZ -----END PGP SIGNATURE----- Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late before the merge window, or had dependencies on previous branches. Highlights: - ux500: misc. cleanup, fixup I2C devices - exynos: DT updates for RTC; PM updates - at91: DT updates for NAND; new platforms added to generic defconfig - sunxi: DT updates: cubieboard2, pinctrl driver, gated clocks - highbank: LPAE fixes, select necessary ARM errata - omap: PM fixes and improvements; OMAP5 mailbox support - omap: basic support for new DRA7xx SoCs" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: dts: vexpress: Add CCI node to TC2 device-tree ARM: EXYNOS: Skip C1 cpuidle state for exynos5440 ARM: EXYNOS: always enable PM domains support for EXYNOS4X12 ARM: highbank: clean-up some unused includes ARM: sun7i: Enable the A20 clocks in the DTSI ARM: sun6i: Enable clock support in the DTSI ARM: sun5i: dt: Use the A10s gates in the DTSI ARM: at91: at91_dt_defconfig: enable rm9200 support ARM: dts: add ADC device tree node for exynos5420/5250 ARM: dts: Add RTC DT node to Exynos5420 SoC ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC ARM: dts: Fix the RTC DT node name for Exynos5250 irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ... |
|
Linus Torvalds | b4b50fd78b |
ARM: SoC platform changes for 3.12
This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN R8heV6GX5OzlFLGX2tKK =fJ5x -----END PGP SIGNATURE----- Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ... |
|
Linus Torvalds | 8e73e367f7 |
ARM: SoC cleanups for 3.12
This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJSKg/NAAoJEIwa5zzehBx3vxIP/19ouV4WrzOeEMz2Id8bYT5/ Tu9HRm+PJJ2O+4P+DYlycRAEHsbuDbwgdcqToH3quca1YnIcoJgY0FA6D0ihQ5uE EvTgFIpkNMLnR43GYDOE3a/rR3hYPg5oQabKFn7ZGLG2ND3D3d2N05WT8XNbTYDk nvCXvyRRT1ynCEzbxRBiE8x62ao4bqa5dZ1zrHHIEoakqciXEng8IU0nxx7SUarv 61GBJHVoGFpwOWXdgt2uxyXFbn6nMrhf33ynB+RRAZhqlrC8FROj8Iz+3EoKSAHc fMJSw6jgdjMCfTDvi0j/eemoNC4fm0eP17Dz9WcwxtIrJPNFVrxZq+biDnpb49nM IHsbNrILosw9AbHr3C0kTU9tp+Jie2cE1RWHqTIN3S3zb4qN+fIJiU6o6LMhsNP5 +ZxL4M5IYmvZYbU3a+A00TPwVRqBbsZB+et9RtYZsdpepovDiN4XcixEoT7ffqrt VLjJyoX7Aqmds46lMdsdD3bpPkREmMdf8aMm5fvdIqwbJi1pFMMGMdTgN2WLG5aM r0bj/DizxL7Brs8RHwOScUgXteZs3gg87v5Ns/3zAyJZvE4norPAiT+EJeXylpRO LDqqaypFs75nU+mWLNo8Fzck4Xue55SBqx5Bo3aD/Smk8B6r4KMqnMKVsV5RFHAU XfWb49HulUwHHdn5DAPx =1vE4 -----END PGP SIGNATURE----- Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ... |
|
Linus Torvalds | 2e03285224 |
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King: "This set includes adding support for Neon acceleration of RAID6 XOR code from Ard Biesheuvel, cache flushing and barrier updates from Will Deacon, and a cleanup to the ARM debug code which reduces the amount of code by about 500 lines. A few other cleanups, such as constifying the machine descriptors which already shouldn't be written to, cleaning up the printing of the L2 cache size" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (55 commits) ARM: 7826/1: debug: support debug ll on hisilicon soc ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tables ARM: 7828/1: ARMv7-M: implement restart routine common to all v7-M machines ARM: 7827/1: highbank: fix debug uart virtual address for LPAE ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022 ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port ARM: debug: move SPEAr debug to generic PL01x code ARM: debug: move davinci debug to generic 8250 code ARM: debug: move keystone debug to generic 8250 code ARM: debug: remove DEBUG_ROCKCHIP_UART ARM: debug: provide generic option choices for 8250 and PL01x ports ARM: debug: move PL01X debug include into arch/arm/include/debug/ ARM: debug: provide PL01x debug uart phys/virt address configuration options ARM: debug: add support for word accesses to debug/8250.S ARM: debug: move 8250 debug include into arch/arm/include/debug/ ARM: debug: provide 8250 debug uart phys/virt address configuration options ARM: debug: provide 8250 debug uart register shift configuration option ARM: debug: provide 8250 debug uart flow control configuration option ... |
|
Russell King | 141b97433d | Merge branches 'debug-choice', 'devel-stable' and 'misc' into for-linus | |
Linus Torvalds | 542a086ac7 |
Driver core patches for 3.12-rc1
Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.21 (GNU/Linux) iEYEABECAAYFAlIlIPcACgkQMUfUDdst+ynUMwCaAnITsxyDXYQ4DqEsz8EcOtMk 718AoLrgnUZs3B+70AT34DVktg4HSThk =USl9 -----END PGP SIGNATURE----- Merge tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ... |
|
Will Deacon | 84b6504f56 |
ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022
On Cortex-A15 CPUs up to and including r0p4, in certain rare sequences of code, the loop buffer may deliver incorrect instructions. This workaround disables the loop buffer to avoid the erratum. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Olof Johansson | d296ebe0e6 |
Add basic support for devices on dra7xx by adding the PRCM and hwmod
parts the same way as for other omaps. This is still needed in addition to device tree support for things like power management. Via Paul Walmsley <paul@pwsan.com>: This series adds basic TI DRA7xx PRCM and hwmod support. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/dra7xx_prcm_devel_v3.12/20130823050445/ Note that DRA7xx could not be tested locally, since I don't have a board. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJSGysnAAoJEBvUPslcq6VzP00QALzGla3/ZMwnE3RpIkU8f9Ju dQkgtV/71yM7RZE6AxW1BgrFV3EcIEn2aPTWTAPXih7mtQJ30BlshDPu0JKSPQp4 jkbr/T7euMkmJ2g3nACTPLvcjdEwsBQXYfDb+qRHX6HV80Yg0qdXtLhfn4lEGFPw A+MYlFGli3aQYlnRFIDtSSBecOfLPQ94VYZtk2modz1k6aXMD6qrORLuu4jvuICS bcRnJAgjxYez7vvnJ0h+1uQsgni4lUqrUzjuNqMEmZRFyIjilt2kP9gRpSdKLu2p nwPSOLVpMy6D/LWJrhhRRVkyoOwAQk6T0nfmKkk+IEZTbeu3AYfo8yX35/O8Ziw7 BA1P4G66A5Y2q/pWtfZB2XO1ifD5cmPHrI/Vzq3rVq6yEoWI3vCjiDnRYsxU2J6M lkXCQtXnCI/xdALSeDJ14m0d/IefANf0iS/DJp/+iHwGRgH1twas32Sk9V1ub4i6 Oh2XUIoydZpv6eeJzQSTBxNYSDO0alN7hHBQKkwqOpi7sSCLg4kZW8GgF2Vm5YC4 bQbH636o8Vd+E0yP2U0F9gZoNN7J1xFdzomU8sEyYLXBBXlzvIbrXH8t1qcK0Gg7 4xE3hfoLuieiaX4uvgeW3yEvGaFkuK8MmnMdKxzZnKGhEtBj33+gGLaLJohhg0st AO4khUsBuZNmqcnKOCui =c+8k -----END PGP SIGNATURE----- Merge tag 'omap-for-v3.12/dra7xx-prcm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/all From Tony Lindgren: Add basic support for devices on dra7xx by adding the PRCM and hwmod parts the same way as for other omaps. This is still needed in addition to device tree support for things like power management. Via Paul Walmsley <paul@pwsan.com>: This series adds basic TI DRA7xx PRCM and hwmod support. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/dra7xx_prcm_devel_v3.12/20130823050445/ Note that DRA7xx could not be tested locally, since I don't have a board. * tag 'omap-for-v3.12/dra7xx-prcm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: DRA7: Enable PM framework initializations ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data ARM: OMAP: DRA7: Reuse the omap44xx_restart and fix the device instance ARM: OMAP: DRA7: powerdomain: Handle missing vc/vp ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters ARM: OMAP: DRA7: CM: Add minimal regbit shifts ARM: OMAP: DRA7: CM: Add DRA7XX register defines ARM: OMAP: DRA7: PRM: Add DRA7XX register definitions ARM: DRA7: Add the build support in omap2plus ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5 ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs' ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512 ARM: DRA7: board-generic: Add basic DT support ARM: DRA7: Resue the clocksource, clockevent support ARM: DRA7: Reuse io tables and add a new .init_early ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra Signed-off-by: Olof Johansson <olof@lixom.net> |
|
Olof Johansson | 66fafb6fbf |
move irq driver out of mach-mmp to support multiplatform
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIbBAABAgAGBQJSGLR+AAoJELXbXY/c+iv2GUEP+OvNeUa/t/1/WSH7jbLNJmPt vWZreU7i+ASC7PVt+7f0KQnmHVQTsgMChbGIC+eAkGWt/H9xgA5NvGrfqSY4gGdD JK/4zM1wPvj5Xpx+mLi1NX8fEGVlfXEQedQPoqMP8pfAHjsQs/8MylrAW6/iogZ9 RtjRPH5vFdOjg12TzD2rnw4mdHaI4ULBaSvLgFhfqlKaPQdHwr/cuxsmmpTzXw1f b1/+n27EYmAvrjux8nSSgW3DrAIh9b0cbRCQZ4mFvtVsZIXAnXHfJ0ALNglxTS0O dPmZbL+tqHIhts690D72uupduzCtJwPUsj017KS0LZsaL5lyvnSn3d3C5rskyejx 3g53FgK8gzj8PWqy9UdhWdCf+qFAkU+g1J43fW7qfPIIIHHEjtfg65pNvpYnscri mOuxHbC6llVjt/UXS1PvcXAOcmcqbnzqsneLeHHRxv+qUXa/gNa/jemPxqSYMMG2 wOKCH3dv+LOlNINHTD9nwbEQJjXx3ceV0rViSJrX5cjbIs5JpWA/IPFicBzEfrxn fZ5sEW6AAqK25m6m097VZ1ezZmKUTyYhDGMncxKe6eF5bWFEaqM9AGQUtzeH1hiA ijBrHfEiL18DByZ4hTdlI8JIUXFWfWYVoGVjNp+pdntebzLfV55ZJifYBxtc8BYk xykbReN/uZeaPz+n0I8= =Vx7M -----END PGP SIGNATURE----- Merge tag 'mmp-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into late/all From Haojian Zhuang: Move irq driver out of mach-mmp to support multiplatform * tag 'mmp-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux: irqchip: mmp: avoid to include irqs head file ARM: mmp: avoid to include head file in mach-mmp irqchip: mmp: support irqchip irqchip: move mmp irq driver |
|
Russell King | cdf0bfb012 | Merge branch 'for-rmk/barriers' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable | |
Haojian Zhuang | 0f374561b5 |
irqchip: mmp: support irqchip
Support IRQCHIP & CONFIG_MULTI_IRQ_HANDLER in irq-mmp driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Reviewed-by: Daniel Drake <dsd@laptop.org> |
|
Geert Uytterhoeven | bf2206957c |
Kconfig: Remove hotplug enable hints in CONFIG_KEXEC help texts
commit
|
|
Kevin Hilman | bfa664f21b |
ARM: tegra: core SoC enhancements for 3.12
This branch includes a number of enhancements to core SoC support for Tegra devices. The major new features are: * Adds a new CPU-power-gated cpuidle state for Tegra114. * Adds initial system suspend support for Tegra114, initially supporting just CPU-power-gating during suspend. * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode both gates CPU power, and places the DRAM into self-refresh mode. * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved from arch/arm/mach-tegra/ to drivers/pci/host/. The PCIe driver work depends on the following tag from Thomas Petazzoni: git://git.infradead.org/linux-mvebu.git mis-3.12.2 ... which is merged into the middle of this pull request. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJSDlwwAAoJEMzrak5tbycxR68QAJZ/Izc9Izj0JH8hmCEvMNfi ub1DQfWAy3oXk0ttkk+BMvuyD8JTvBr8LSK8GqjZs//rFGlW81A4NHTvCwoKZjKe hgrRgI2B1wj3Um1sp8le9D0klKrTcfmpXrOxH8ALgz0BIpMge8AGZHkV0SrfQa1z bKiISFVAw12WJCVrQ2nbzpZGU51lbyJ/+RghttM1a8LuS2P03CZgt2kqiytk3UVK uiGEy3sCkjXLFO3EsUvM6ha623S6BumCAYjNfgDowTVKaoEe1r2TD4bFeU6lGcXJ mlVTv0Kywazf4Q2gKzkbDz8UQMArW4hok2iILHzz+sf/Rn0hie5XVqhFlbBlcae8 vyWsHmqvmE9BJAK2G2RLs9cJCTzEpEyAjUWfE3sIIa3ztSguT5+PHndDLR/d76aS j8L3FYReICZ1NuNw1JSQPFs9g2EWJbNRiy+8o9O2elsJMpLDBj/FcV6TVpudbBTI z7hvN+XSVYUaCVD4e8ma9YoC3VGseiAZvd+Y8hPd2MFBECVPNpy2bOacieU6Bgxh zjSBXZ/URxN3rTkv9+F3BLWAOfVmJYN0rKV9YfM/rqpWjc9iQx30m1fRZDnXWhvd ps8eFIYsKqc6v9AAugl/RexFy4Laav9eREjb0k2LA8ClLhK/qLLuiisVmKWS/grh lX9tzPEG2nZcjxSYaEjz =ve9i -----END PGP SIGNATURE----- Merge tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From: Stephen Warren: ARM: tegra: core SoC enhancements for 3.12 This branch includes a number of enhancements to core SoC support for Tegra devices. The major new features are: * Adds a new CPU-power-gated cpuidle state for Tegra114. * Adds initial system suspend support for Tegra114, initially supporting just CPU-power-gating during suspend. * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode both gates CPU power, and places the DRAM into self-refresh mode. * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved from arch/arm/mach-tegra/ to drivers/pci/host/. The PCIe driver work depends on the following tag from Thomas Petazzoni: git://git.infradead.org/linux-mvebu.git mis-3.12.2 ... which is merged into the middle of this pull request. * tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (33 commits) ARM: tegra: disable LP2 cpuidle state if PCIe is enabled MAINTAINERS: Add myself as Tegra PCIe maintainer PCI: tegra: set up PADS_REFCLK_CFG1 PCI: tegra: Add Tegra 30 PCIe support PCI: tegra: Move PCIe driver to drivers/pci/host PCI: msi: add default MSI operations for !HAVE_GENERIC_HARDIRQS platforms ARM: tegra: add LP1 suspend support for Tegra114 ARM: tegra: add LP1 suspend support for Tegra20 ARM: tegra: add LP1 suspend support for Tegra30 ARM: tegra: add common LP1 suspend support clk: tegra114: add LP1 suspend/resume support ARM: tegra: config the polarity of the request of sys clock ARM: tegra: add common resume handling code for LP1 resuming ARM: pci: add ->add_bus() and ->remove_bus() hooks to hw_pci of: pci: add registry of MSI chips PCI: Introduce new MSI chip infrastructure PCI: remove ARCH_SUPPORTS_MSI kconfig option PCI: use weak functions for MSI arch-specific functions ARM: tegra: unify Tegra's Kconfig a bit more ARM: tegra: remove the limitation that Tegra114 can't support suspend ... Signed-off-by: Kevin Hilman <khilman@linaro.org> |
|
Ezequiel Garcia | 19a0519d36 |
ARM: 7818/1: feroceon: Add suspend/resume operation
Add support for suspend/resume operations. The implemented procedures are identical to the ones for ARM926. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Thomas Gleixner | da0ec6f7c1 |
ARM: 7814/2: Allow forced irq threading
All timer interrupts and the perf interrupt are marked NO_THREAD, so its safe to allow forced interrupt threading. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Olof Johansson | 8b2496a228 |
Here is the Samsung PWM cleanup series for you. Particular patches of the
series involve following modifications: 1) fixing up few things in samsung_pwm_timer clocksource driver, 2) moving remaining Samsung platforms to the new clocksource driver, 3) removing old clocksource driver, 4) adding new multiplatform- and DT-aware PWM driver, 5) moving all Samsung platforms to use the new PWM driver, 6) removing old PWM driver, 7) removing all PWM-related code that is not used anymore. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.20 (GNU/Linux) iQIcBAABAgAGBQJSCT7XAAoJEIv3Hb8G/Xru/rcP/012END3oSxl+G1C0akZ+1Ko uZZXib9c1g7TzsE2lR1YRyZvKIylMEiETEupIf0gnliulSfQFKYN+0FMbqVfdYXZ fKYRA6rJV/b+lu6cY6E0Q12uXH1Cbrgk5Puqx09AXiR142E2DgCpt0A0aagYDff3 P5nNxs1TcBTWcRdFgE5YytkdNtd9W5V87FEzctj4ENByXtayadcFPLjucmgfyrPo m763wmkoo6drnOnmpg+38yRKPm725tVami2Z0XN6FeFC7BYXa6VfqBdSkuhx8KDQ BbO2BUQeaLhpNM1LICfhD0w9VTXhPBLP1GA3qnNa9JCw+vO6dQEPwzMG9+gSKdqa jeFM9Vz11bqWfo5scI/5/tUxx2WOSqG3mq3LfMFKjRW6UCrUkVBYvBQCKHK6BF22 Bnh5o5wpZDEHUJqjgdUeY+hjU6vhGTxa7VERZ1vBDn5h1EyLGq7YzLdEFdhaxRAk TShtoNXi7gD9JhoJkR5I4el5+I05sCdDS4NNNfoYTb2b/zxTpGzy+lZpBk3HuE+A fbe5zJVL4wsU88Li2vQ2oIUXOW2TIJDXAC1zV7N9GuIrDPxSPIoDcaFX68Ydfxy1 h7jzXCxTgJdVXQV4An8aviQ4CIOtKkiWFoFlArS2CrroHhHYwhQznlwHQ1R7YTI1 3ICxJdK4uPfQ1HQZQcxR =xmmW -----END PGP SIGNATURE----- Merge tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux into next/cleanup From Tomasz Figa: Here is the Samsung PWM cleanup series. Particular patches of the series involve following modifications: - fixing up few things in samsung_pwm_timer clocksource driver, - moving remaining Samsung platforms to the new clocksource driver, - removing old clocksource driver, - adding new multiplatform- and DT-aware PWM driver, - moving all Samsung platforms to use the new PWM driver, - removing old PWM driver, - removing all PWM-related code that is not used anymore. * tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux: (684 commits) ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver pwm: samsung: Rename to pwm-samsung-legacy ARM: SAMSUNG: Remove unused PWM timer IRQ chip code ARM: SAMSUNG: Remove old samsung-time driver ARM: SAMSUNG: Move all platforms to new clocksource driver ARM: SAMSUNG: Set PWM platform data ARM: SAMSUNG: Add new PWM platform device ARM: SAMSUNG: Unify base address definitions of timer block clocksource: samsung_pwm_timer: Handle suspend/resume correctly clocksource: samsung_pwm_timer: Do not use clocksource_mmio clocksource: samsung_pwm_timer: Cache clocksource register address clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit clocksource: samsung_pwm_timer: Do not request PWM mem region + v3.11-rc4 Conflicts: arch/arm/Kconfig.debug Signed-off-by: Olof Johansson <olof@lixom.net> |
|
Kevin Hilman | bee22087fa |
Merge branch 'msm/cleanup' into next/cleanup
From David Brown <davidb@codeaurora.org>: * msm/cleanup: ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ARM: msm: Move debug-macro.S to include/debug ARM: msm: Don't compile __msm_ioremap_caller() unless used ARM: msm: Remove unused and unmapped MSM_TLMM_BASE for 8x60 Signed-off-by: Kevin Hilman <khilman@linaro.org> |
|
R Sricharan | 6d0fc190c8 |
ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
DRA7xx has 8 GPIO banks so that there are 32x8 = 256 GPIOs. In order for the gpiolib to detect and initialize these and other TWL GPIOs, ARCH_NR_GPIO is set to 512 using the kconfig default for DRA7. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> |
|
Thomas Petazzoni | ebd97be635 |
PCI: remove ARCH_SUPPORTS_MSI kconfig option
Now that we have weak versions for each of the PCI MSI architecture functions, we can actually build the MSI support for all platforms, regardless of whether they provide or not architecture-specific versions of those functions. For this reason, the ARCH_SUPPORTS_MSI hidden kconfig boolean becomes useless, and this patch gets rid of it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> |
|
Stephen Boyd | c602520ff8 |
ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE
This allows us to remove the init_time callback in the DT machine descriptors, shrinking the code. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> |
|
Tomasz Figa | b0dd5a39a0 |
ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
As the need for an IRQ chip handling PWM timer interrupt chaining is gone now, this patch removes all the code made unnecessary. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> |
|
Tomasz Figa | 4280506ac9 |
ARM: SAMSUNG: Move all platforms to new clocksource driver
This patch moves all Samsung platforms using PWM clocksource from legacy samsung-time to new samsung-pwm-timer driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> |
|
Linus Torvalds | 6d039f8f03 |
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King: "I've thought long and hard about what to say for this pull request, and I really can't work out anything sane to say to summarise much of these commits. The problem is, for most of these are, yet again, lots of small bits scattered around the place without any real overall theme to them" Most notable is probably the kuser page helper improvements. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (22 commits) ARM: Add .text annotations where required after __CPUINIT removal ARM: 7803/1: Fix deadlock scenario with smp_send_stop() ARM: make vectors page inaccessible from userspace ARM: move signal handlers into a vdso-like page ARM: allow kuser helpers to be removed from the vector page ARM: update FIQ support for relocation of vectors ARM: use linker magic for vectors and vector stubs ARM: move vector stubs ARM: poison memory between kuser helpers ARM: poison the vectors page ARM: 7801/1: v6: prevent gcc 4.5 from reordering extended CP15 reads above is_smp() test ARM: 7800/1: ARMv7-M: Fix name of NVIC handler function ARM: Fix sorting of machine- initializers ARM: 7791/1: a.out: remove partial a.out support ARM: 7790/1: Fix deferred mm switch on VIVT processors ARM: 7789/1: Do not run dummy_flush_tlb_a15_erratum() on non-Cortex-A15 ARM: 7787/1: virt: ensure visibility of __boot_cpu_mode ARM: 7788/1: elf: fix lpae hwcap feature reporting in proc/cpuinfo ARM: 7786/1: hyp: fix macro parameterisation ARM: 7785/1: mm: restrict early_alloc to section-aligned memory ... |
|
Russell King | 24195cad3e | Merge branch 'security-fixes' into fixes | |
Russell King | 19accfd373 |
ARM: move vector stubs
Move the machine vector stubs into the page above the vector page, which we can prevent from being visible to userspace. Also move the reset stub, and place the swi vector at a location that the 'ldr' can get to it. This hides pointers into the kernel which could give valuable information to attackers, and reduces the number of exploitable instructions at a fixed address. Cc: <stable@vger.kernel.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Steven Capper | 4bfab2034b |
ARM: 7792/1: mm: Remove general hugetlb code from ARM
General forms of huge_pte_alloc, huge_pte_offset and follow_huge_pmd are now available in mm/hugetlb.c. This patch removes the ARM copies of these functions and activates the general ones by enabling: CONFIG_ARCH_WANT_GENERAL_HUGETLB Signed-off-by: Steve Capper <steve.capper@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Russell King | c9218b1639 |
ARM: Allow selection HZ values
Allow users to configure the Hz rate on implementations which do not have a fixed clock rate. Whenever HZ_FIXED is not set through one of its "default" settings, the user is allowed to select a tick rate from 100, 200, 250, 300, 500Hz and 1kHz. This is slightly more choice than with the generic HZ selection in kernel/Kconfig.hz (which only does 100, 250, 300Hz and 1kHz). The reason for including 200Hz is that a greater number of other platforms want that via the fixed rate, and 500Hz just seemed to be a better middle value than 300Hz (which is of course very close to 250.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Will Deacon | acfdd4b1f7 |
ARM: 7791/1: a.out: remove partial a.out support
a.out support on ARM requires that argc, argv and envp are passed in r0-r2 respectively, which requires hacking load_aout_binary to prevent argc being clobbered by the return code. Whilst mainline kernels do set the registers up in start_thread, the aout loader has never carried the hack in mainline. Initialising the registers in this way actually goes against the libc expectations for ELF binaries, where argc, argv and envp are passed on the stack, with r0 being used to hold a pointer to an exit function for cleaning up after the dynamic linker if required. If the pointer is NULL, then it is ignored. When execing an ELF binary, Linux currently zeroes r0, then sets it to argc and then finally clobbers it with the return value of the execve syscall, so we actually end up with: r0 = 0 stack[0] = argc r1 = stack[1] = argv r2 = stack[2] = envp libc treats r1 and r2 as undefined. The clobbering of r0 by sys_execve works for user-spawned threads, but when executing an ELF binary from a kernel thread (via call_usermodehelper), the execve is performed on the ret_from_fork path, which restores r0 from the saved pt_regs, resulting in argc being presented to the C library. This has horrible consequences when the application exits, since we have an exit function registered using argc, resulting in a jump to hyperspace. This patch solves the problem by removing the partial a.out support from arch/arm/ altogether. Cc: <stable@vger.kernel.org> Cc: Ashish Sangwan <ashishsangwan2@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Sachin Kamat | 53302bf60d |
ARM: EXYNOS: Update CONFIG_ARCH_NR_GPIO for Exynos
With the recent cleanup in Exynos platform code notably commits |
|
Olof Johansson | 47dcd3563e |
Now that we have a generic arch hook for broadcast we can remove the local
timer API entirely. Doing so will reduce code in ARM core, reduce the architecture dependencies of our timer drivers, and simplify the code because we no longer go through an architecture layer that is essentially a hotplug notifier. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQIcBAABCAAGBQJRydGwAAoJENidgRMleOc9tMMP/Awy0ETkLHQkXdFdRNLQH7Jd BpDagzBkpt/U/qsh2Dy5Yhz7Qf/HQg6CwJK/b1apHguSPzNcSov+YS7ArPV+kuDY 9OCF5wkVqPW7BPHlxJ+2QAjayIFUaBR+35kpiU+hv9Gkhs11oK90iAWxEIDUGzA6 5miuOVJeyDEwV8des3NYmVVOKziHLJjX3fjMVnc2gxE6PLmOEUQ9t42bVU1aCfub pRMUXNuG+aFk8lRExPfs4wWfEKCOHrgJPSE4OPFp3pDJeqhFi5tXTiPBQ22FpNf5 78fEDeguS0QS6f/3rGKSdGu/Yz5Lmcldv4tOkfzvNaZP7zhE18wKJu6bSCrZ/Onn MnhriYWZh+YgX1V8wTMFMPEV+OR+FJdN4C8PhvNWmMC1Xoq25HtrVQUP5aElgAJs mLcgTXxLYpvZH3jPxdtMR9IuDc+86qmFerGShWqp/1YaNHwpR8dNZxFyVNfw+FUL /GoAjk/6MsJlZUchiF7I8yp4jYyMcXcV8Bi4tgIAf5rJO9PZBpuxtyAL9uVHnL13 pwkctMnMQwoP6AE9uYfbdnHCKJxF1hny4tKI5sNxAmK8I6bBkfibIZ3sNRAbSrY7 56kV+tJrrgvgAUDkgdluyS9eFs26iHGPsHK4lmzJzFylWmvWFa8tWpP6G0kCa0wP A1XCqUOryLeL8enPV+z2 =wZbm -----END PGP SIGNATURE----- Merge tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup From Stephen Boyd: Now that we have a generic arch hook for broadcast we can remove the local timer API entirely. Doing so will reduce code in ARM core, reduce the architecture dependencies of our timer drivers, and simplify the code because we no longer go through an architecture layer that is essentially a hotplug notifier. * tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: smp: Remove local timer API clocksource: time-armada-370-xp: Divorce from local timer API clocksource: time-armada-370-xp: Fix sparse warning ARM: msm: Divorce msm_timer from local timer API ARM: PRIMA2: Divorce timer-marco from local timer API ARM: EXYNOS4: Divorce mct from local timer API ARM: OMAP2+: Divorce from local timer API ARM: smp_twd: Divorce smp_twd from local timer API ARM: smp: Remove duplicate dummy timer implementation Resolved a large number of conflicts due to __cpuinit cleanups, etc. Signed-off-by: Olof Johansson <olof@lixom.net> |
|
Russell King | b4f656eea6 |
Pull branch 'for-rmk' of git://git.linaro.org/people/ardbiesheuvel/linux-arm into devel-stable
Comments from Ard Biesheuvel: I have included two use cases that I have been using, XOR and RAID-6 checksumming. The former gets a 60% performance boost on the NEON, the latter over 400%. ARM: add support for kernel mode NEON Adds kernel_neon_begin/end (renamed from kernel_vfp_begin/end in the previous version to de-emphasize the VFP part as VFP code that needs software assistance is not supported currently.) Introduces <asm/neon.h> and the Kconfig symbol KERNEL_MODE_NEON. This has been aligned with Catalin for arm64, so any NEON code that does not use assembly but intrinsics or the GCC vectorizer (such as my examples) can potentially be shared between arm and arm64 archs. ARM: move VFP init to an earlier boot stage This is needed so the NEON is enabled when the XOR and RAID-6 algo boot time benchmarks are run. ARM: be strict about FP exceptions in kernel mode This adds a check to vfp_support_entry() to flag unsupported uses of the NEON/VFP in kernel mode. FP exceptions (bounces) are flagged as a bug, this is because of their potentially intermittent nature. Exceptions caused by the fact that kernel_neon_begin has not been called are just routed through the undef handler. ARM: crypto: add NEON accelerated XOR implementation This is the xor_blocks() implementation built with -ftree-vectorize, 60% faster than optimized ARM code. It calls in_interrupt() to check whether the NEON flavor can be used: this should really not be necessary, but due to xor_blocks'squite generic nature, there is no telling how exactly people may be using it in the real world. lib/raid6: add ARM-NEON accelerated syndrome calculation This is a port of the RAID-6 checksumming code in altivec.uc ported to use NEON intrinsics. It is about 4x faster than the sequential code. |
|
Linus Torvalds | bfd65dd9fe |
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King: "A few fixes for ARM, mostly just one liners with the exception of the missing section specification. We decided not to rely on .previous to fix this but to explicitly state the section we want the code to be in." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7778/1: smp_twd: twd_update_frequency need be run on all online CPUs ARM: 7782/1: Kconfig: Let ARM_ERRATA_364296 not depend on CONFIG_SMP ARM: mm: fix boot on SA1110 Assabet ARM: 7781/1: mmu: Add debug_ll_io_init() mappings to early mappings ARM: 7780/1: add missing linker section markup to head-common.S |
|
Fabio Estevam | fd83247842 |
ARM: 7782/1: Kconfig: Let ARM_ERRATA_364296 not depend on CONFIG_SMP
imx_v6_v7_defconfig handles both multi-core and single-core SoCs, and it has CONFIG_SMP=y selected by default. With such config we cannot select ARM_ERRATA_364296, as it depends on !SMP. Let ARM_ERRATA_364296 be undependent on CONFIG_SMP, so that we can select this erratum for the ARM1136 SoCs, even if CONFIG_SMP=y is enabled. Reviewed-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> |
|
Kyungsik Lee | f9b493ac9b |
arm: add support for LZ4-compressed kernel
Integrates the LZ4 decompression code to the arm pre-boot code. Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Cc: Yann Collet <yann.collet.73@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
Ard Biesheuvel | 73c132c15d |
ARM: add support for kernel mode NEON
In order to safely support the use of NEON instructions in kernel mode, some precautions need to be taken: - the userland context that may be present in the registers (even if the NEON/VFP is currently disabled) must be stored under the correct task (which may not be 'current' in the UP case), - to avoid having to keep track of additional vfpstates for the kernel side, disallow the use of NEON in interrupt context and run with preemption disabled, - after use, re-enable preemption and re-enable the lazy restore machinery by disabling the NEON/VFP unit. This patch adds the functions kernel_neon_begin() and kernel_neon_end() which take care of the above. It also adds the Kconfig symbol KERNEL_MODE_NEON to enable it. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> |
|
Linus Torvalds | 21884a83b2 |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner: "The timer changes contain: - posix timer code consolidation and fixes for odd corner cases - sched_clock implementation moved from ARM to core code to avoid duplication by other architectures - alarm timer updates - clocksource and clockevents unregistration facilities - clocksource/events support for new hardware - precise nanoseconds RTC readout (Xen feature) - generic support for Xen suspend/resume oddities - the usual lot of fixes and cleanups all over the place The parts which touch other areas (ARM/XEN) have been coordinated with the relevant maintainers. Though this results in an handful of trivial to solve merge conflicts, which we preferred over nasty cross tree merge dependencies. The patches which have been committed in the last few days are bug fixes plus the posix timer lot. The latter was in akpms queue and next for quite some time; they just got forgotten and Frederic collected them last minute." * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) hrtimer: Remove unused variable hrtimers: Move SMP function call to thread context clocksource: Reselect clocksource when watchdog validated high-res capability posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting posix_timers: fix racy timer delta caching on task exit posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule() selftests: add basic posix timers selftests posix_cpu_timers: consolidate expired timers check posix_cpu_timers: consolidate timer list cleanups posix_cpu_timer: consolidate expiry time type tick: Sanitize broadcast control logic tick: Prevent uncontrolled switch to oneshot mode tick: Make oneshot broadcast robust vs. CPU offlining x86: xen: Sync the CMOS RTC as well as the Xen wallclock x86: xen: Sync the wallclock when the system time is set timekeeping: Indicate that clock was set in the pvclock gtod notifier timekeeping: Pass flags instead of multiple bools to timekeeping_update() xen: Remove clock_was_set() call in the resume path hrtimers: Support resuming with two or more CPUs online (but stopped) timer: Fix jiffies wrap behavior of round_jiffies_common() ... |
|
Thomas Gleixner | 2b0f89317e |
Merge branch 'timers/posix-cpu-timers-for-tglx' of
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core Frederic sayed: "Most of these patches have been hanging around for several month now, in -mmotm for a significant chunk. They already missed a few releases." Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
|
Linus Torvalds | fb2af0020a |
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King: "This contains the usual updates from other people (listed below) and the usual random muddle of miscellaneous ARM updates which cover some low priority bug fixes and performance improvements. I've started to put the pull request wording into the merge commits, which are: - NoMMU stuff: This includes the following series sent earlier to the list: - nommu-fixes - R7 Support - MPU support I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I were discussing today until we've reached a conclusion/that's had some more review. This is rebased (and re-tested) on your devel-stable branch because otherwise there were going to be conflicts with Uwe's V7M work now that you've merged that. I've included the fix for limiting MPU to CPU_V7. - Huge page support These changes bring both HugeTLB support and Transparent HugePage (THP) support to ARM. Only long descriptors (LPAE) are supported in this series. The code has been tested on an Arndale board (Exynos 5250). - LPAE updates Please pull these miscellaneous LPAE fixes I've been collecting for a while now for 3.11. They've been tested and reviewed by quite a few people, and most of the patches are pretty trivial. -- Will Deacon. - arch_timer cleanups Please pull these arch_timer cleanups I've been holding onto for a while. They're the same as my last posting, but have been rebased to v3.10-rc3. - mpidr linearisation (multiprocessor id register - identifies which CPU number we are in the system) This patch series that implements MPIDR linearization through a simple hashing algorithm and updates current cpu_{suspend}/{resume} code to use the newly created hash structures to retrieve context pointers. It represents a stepping stone for the implementation of power management code on forthcoming multi-cluster ARM systems. It has been tested on TC2 (dual cluster A15xA7 system), iMX6q, OMAP4 and Tegra, with processors hitting low-power states requiring warm-boot resume through the cpu_resume code path" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: 7775/1: mm: Remove do_sect_fault from LPAE code ARM: 7777/1: Avoid extra calls to the C compiler ARM: 7774/1: Fix dtb dependency to use order-only prerequisites ARM: 7770/1: remove residual ARMv2 support from decompressor ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator ARM: 7767/1: let the ASID allocator handle suspended animation ARM: 7766/1: versatile: don't mark pen as __INIT ARM: 7765/1: perf: Record the user-mode PC in the call chain. ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork ARM: kernel: implement stack pointer save array through MPIDR hashing ARM: kernel: build MPIDR hash function data structure ARM: mpu: Ensure that MPU depends on CPU_V7 ARM: mpu: protect the vectors page with an MPU region ARM: mpu: Allow enabling of the MPU via kconfig ARM: 7758/1: introduce config HAS_BANDGAP ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting ARM: 7751/1: zImage: don't overwrite ourself with a page table ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace ... |
|
Linus Torvalds | 42daabf62b |
ARM SoC late changes
These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM Conflicts: * In Kconfig.debug, various additions trivially conflict, the list should be kept in alphabetical order when resolving. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUdLnl2CrR//JCVInAQIrKhAAwvtsGNe6j9nDuLEitWtQAmhHYZQyUJ8k o9j/1j1CqhE8C0bLRud8D4m1GxfxbGeRm2d0HoNbxda3FmntUufqBDi6neMiQiLO VltC5rOYL8Mday0Asc3SBfjBj8SZC2bypicKy5zUfzsObCBt343g1WvYffMDNmwH FveOQK6q2BKmO67cazc9tk5xmxjVwP/LB8r5mQtiXmMguw0R+ZIDDIP6xaURFkxX SAElleD2wtvpVHP1d6AKHpXN99u3xV3uoJjKljECEXdBzW/ZX8m7FG2tKY5xy368 ta0Nhh2MSRnBhUYOH9uah4PQWYEsbZ+M/W+3J9tKRu6q9D/c/AAxILyXUY2tcHNC o1UwcUn1druirx3X1AW8HYAGNwW7BD3HANzIiUkQZG7ByfM4qCtUEo2SAFNIGBoR v1FMLhMPgMWotZnKrDQQd0anxkKIOFaSMRVgpQLW2jQt/B7sHLmEH2yDffkbSD76 PQDThnW/dfm9dgeK+X4fPrveIMKbjQlbFz0okN+LPsUf8e1045HBgCi2A0lTIGWM kVVgXHKKXi8G8HBa4VyDlORVHXk1bJEheF+zlDvdk4fHkcf+H/OfvFG2O9TdIdpb ITXRyyteaRM4YIZpnJbzeeZDZXT89c2ah7xq36iM+L1ScidyntPquViXeasSc8r6 pKu9ZDc0Mow= =cRu2 -----END PGP SIGNATURE----- Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ... |
|
Linus Torvalds | 0bf6a210a4 |
ARM SoC driver specific changes
These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11. Conflicts: * In cpu-db8500.c results from the removal of the u8500_of_init_devices function in combination with the split of u8500_auxdata_lookup. * In arch/arm/mach-omap2/devices.c, the includes got reshuffled. we need to keep linux/wl12xx.h and linux/platform_data/mailbox-omap.h. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUdLnomCrR//JCVInAQJI/A/9FydsQa9sdnzLFgcdX5BeRRwkXLfDifCM zDTfUBo+LriKOs7QHblmDg1MnY1UMB2IfrdHD0FsjK7WbZ/91EMAGDPYcI7Fu4+u pGStxwWi2v+oCT1jjeOkCPT7hdCqogsSpybYq8itSb+zdvdOi6U35dWEKz8xGqz4 vTL9gTZbJP0kowkjIcaryk7FIj7BTIvMCW8n55JZEkDe0BuSJGYn5c3Mntut12ZK 5xM2PeNe2sd3dIdA6XbM2ye/XmYa8xY8Qu4/ijxfH1gnJLvz9Unp96nRXpEbIeMb BH2Sro8dxsMCaweIQhSRKGnUWMYO/Rh7/+5EqzJ163Ezthx9nvHXJY2ndWuD7uM1 IcGrMxLtqP22TEMtZAVEATDp/5ymxEo5GM+eayUojQDn213wOJjRs5xz5IBsH4KM 8CM/gpadWmLjWku72yEV4lryLcdS0NVQzpTnEbILEGOU4u7qJtxRAp7x7tWBtFg8 4m/eWcSVk/U2SYbXmQHsfukuWgKY0cnZbctPcdnaqXwTP7toJEAK3gxoMtWh49Jq 2M2PVFyFejaaq5b/71wAJ7ePYw56H0N/F3RsGpPE55AY15++gSoQ+3t2Si68hDw8 NtyJMkQYpTvtqJbHXWpQQ3Zfs7pDBe01WDV7i+m4JTNggxUDaO/t1Fqp+fEksm4J r+luEf5Gcgk= =mJsI -----END PGP SIGNATURE----- Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ... |
|
Linus Torvalds | 3883cbb6c1 |
ARM SoC specific changes
These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added. Conflicts: * asm/glue-proc.h has one CPU type getting added that conflicts with another addition in 3.10-rc7 * Simple context changes in arch/arm/Makefile and arch/arm/Kconfig -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUdLnpmCrR//JCVInAQLoFRAAyatR+MhVFwc91cO7yDw/mz81RO1V9jEd QMufoWi0BRfBsubqxnGlb510EEMTz7gxdrlYPILYNr8TqR+lNGhjKt2FQAjN3q2O IBvu4x8C+xcxnMNbkCnTQRxP/ziK6yCI6e7enQhwuMuJwvsnJtGbsqKi5ODMw6x0 o5EQmIdj5NhhSJqJZPCmWsKbx100TH1UwaEnhNl0DSaFj51n3bVRrK6Nxce10GWZ HsS1/a63lq/YZLkwfUEvgin/PU9Jx5jMmqhlp3bZjG+f1ItdzJF+9IgS248vCIi2 ystzWCH88Kh69UFcYFfCjeZe8H45XcP+Zykd8WC0DvF/a7Hwk5KTKE/ciT6RPRxb rkWW5EwjqZL9w9cU3rUHWtSVenayQMMEmCfksadr1AExyCrhPqfs9RINyBs2lK5a q2bdSFbXZsNzSyL+3yQAfChvRo1/2FdlFVQy+oVUCActV7L77Y7y6jl+b2qzFsSu xMKwvC/1vDXTvOnGk6A/qJu7yrHpqJrvw1eI+wnMswNBl7lCTgyyHnr5y8S092jI KU4hmSxsYP+y13HmKy4ewPy9DYJYBTSdReKfEFo79Dx8eqySAWjHFL/OPRqhCUYS kBq0eZpVZO7tJnHRaRz8n93wIYzb1UOhhgVwxdjPZF9L4d/jzh1BCv0OBWv8IXCu uWLAi92lL24= =0r9S -----END PGP SIGNATURE----- Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ... |
|
Linus Torvalds | d2033f2c1d |
ARM SoC cleanups
This contains cleanups as preparation for other branches adding new features, we pulled 16 branches for 9 platforms into this one. Most notable here is the removal of support for ATAGS based OMAP4 systems. Since all OMAP4 machines are fully functional with DT based booting in 3.10, we can remove a lot of code here. Also noteworthy is Maxime Ripard's cleanup of the machine descriptors, which means we need no machine descriptors in a lot more cases and can boot additional machines by just having the respective device drivers enabled. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUdLnoGCrR//JCVInAQL5bw/+OZeE60sBJxgDAf9XEYls9t5cnLY963uE izgsyLKwwAi21Xbg/0vgGZLbpdfyd2IJa+bWXhxVTLFI43Hb0D2x1hYyMzy/fFWj gmqQ4dLYawYj+1sOirTPWDquR31mavofmMF2HVk23S6NWmNIjPk1+7Wgd46Y4vNX 7T6j4cg9HPrxQ37a6ucOuEX6+rqmFe2Q+v7qcsXkwxkVxgIC8V4MgHJmt8gGMRvB HHrY1kPBHlMJm07fLngilAfpa8G91fmgKxSfugeClyKotj7lHxno/lh/+oxMGvaJ J9memdfbYISLSvDLeH6Rib/zaC7VnSij9QtZmFtToiJ6qVVZiLFd2dpP+ccpaMGb YEvm58ayajAvb0wZMueoeKs9yW0UWCdXdkzKbhuWrwmPDjKSb9f9t1u3ons8vl+2 dOwlTex9/ijsxu1qTHMm4/EVg+NR/AwVVwiBRG9sYnfxSHkgXxPW5TF7T4d1H71v WZkXWsJKIUDQgk+2nnE4J9TvFlPyaV09yFYyiY/+DWAs9DUus8cf37nt2Wz6H1l6 THQcQDcZsPLZsSIEdzUrchdLKDZHzhkb3i8pae7TC6CySiOzj/yX2zbh9Ot538WG 2C7qzAVtyMVuAdFh0caIu0iVXqjsnJLAZGImLZQySR00aq34uXh7MsHepnhAI10q EQ1vILi4mU4= =XDJs -----END PGP SIGNATURE----- Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "This contains cleanups as preparation for other branches adding new features, we pulled 16 branches for 9 platforms into this one. Most notable here is the removal of support for ATAGS based OMAP4 systems. Since all OMAP4 machines are fully functional with DT based booting in 3.10, we can remove a lot of code here. Also noteworthy is Maxime Ripard's cleanup of the machine descriptors, which means we need no machine descriptors in a lot more cases and can boot additional machines by just having the respective device drivers enabled." * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) ARM: picoxcell: remove .nr_irqs reference ARM: s5p64x0: avoid build warning for uncompress.h ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header ARM: SAMSUNG: Remove legacy watchdog reset code ARM: SAMSUNG: Let platforms use the new watchdog reset driver ARM: SAMSUNG: Add watchdog reset driver ARM: SAMSUNG: Use local definitions of watchdog registers watchdog: s3c2410_wdt: Use local register definitions ARM: S5P64X0: Use common uncompress.h part for plat-samsung ARM: SAMSUNG: Consolidate uncompress subroutine ARM: at91: drop rm9200dk board support ARM: dts: msm: Fix merge resolution ARM: OMAP1: Remove dma.h ARM: OMAP1: Remove legacy irda.h and irda setup from board files ARM: OMAP1: Remove duplicated DMA channel definitions ARM: OMAP1: Remove McBSP DMA channel definitions ARM: OMAP2+: Remove dma.h ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions ARM: OMAP2+: Remove duplicated DMA channel definitions ARM: OMAP2+: Remove AES crypto device DMA channel definitions ... |
|
Linus Torvalds | fc76a258d4 |
Driver core patches for 3.11-rc1
Here's the big driver core merge for 3.11-rc1 Lots of little things, and larger firmware subsystem updates, all described in the shortlog. Nice thing here is that we finally get rid of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had been always on for a number of kernel releases, now it's just removed.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iEYEABECAAYFAlHRsGMACgkQMUfUDdst+ylIIACfW8lLxOPVK+iYG699TWEBAkp0 LFEAnjlpAMJ1JnoZCuWDZObNCev93zGB =020+ -----END PGP SIGNATURE----- Merge tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the big driver core merge for 3.11-rc1 Lots of little things, and larger firmware subsystem updates, all described in the shortlog. Nice thing here is that we finally get rid of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had been always on for a number of kernel releases, now it's just removed)" * tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) driver core: device.h: fix doc compilation warnings firmware loader: fix another compile warning with PM_SLEEP unset build some drivers only when compile-testing firmware loader: fix compile warning with PM_SLEEP set kobject: sanitize argument for format string sysfs_notify is only possible on file attributes firmware loader: simplify holding module for request_firmware firmware loader: don't export cache_firmware and uncache_firmware drivers/base: Use attribute groups to create sysfs memory files firmware loader: fix compile warning firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER Documentation: Updated broken link in HOWTO Finally eradicate CONFIG_HOTPLUG driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware Documentation: Tidy up some drivers/base/core.c kerneldoc content. platform_device: use a macro instead of platform_driver_register firmware: move EXPORT_SYMBOL annotations firmware: Avoid deadlock of usermodehelper lock at shutdown dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly ... |
|
Russell King | 3c0c01ab74 |
Merge branch 'devel-stable' into for-next
Conflicts: arch/arm/Makefile arch/arm/include/asm/glue-proc.h |
|
Russell King | cbd379b100 | Merge branches 'fixes', 'mcpm', 'misc' and 'mmci' into for-next | |
Olof Johansson | 8c3d913888 |
MSM clock updates for 3.11.
Per Stephen Boyd's coverletter: Resending to collect higher level maintainer acks per Olof's request. The plan is to push this patchset through MSM to the arm-soc tree. This patchset moves the existing MSM clock code and affected drivers to the common clock framework. A prerequisite of moving to the common clock framework is to use clk_prepare() and clk_enable() so the first few patches migrate drivers to that call (clk_prepare() is a no-op on MSM right now). It also removes some custom clock APIs that MSM provides and finally moves the proc_comm clock code to the common struct clk. This patch series will be used as the foundation of the MSM 8660/8960 clock code that I plan to send out after this series. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAABAgAGBQJRyK/7AAoJEOa6n1xeVN+Cu1UQALf7pzve7+JMbpHp9HtQPTCk GxGBBZ5ay0yWYYSSDRNqMbxNAHxhTuz26AW1CSSAHNpxotMB9t1y4AGkbSqxl3H8 gZZ+9PwSBGN6kABSjfrae1kPxnU6Mg/9J56E5iXFLst0qIvgDejUGG8BXLHDuzjM weQZJf6p6t9SZIHc/80RUsiVmRkqKM9Mp6NvyO4irQOKwfvQ76mjWNqiUrQS7wwA +glbwR3PMg31bvUXOcWuoBp3zbZYvN65bUSwZMIagynqYqU8g+bwDA2NQKjFzoXM ActLyurznSytcER+/+3JbRh32kMI1Bh/jnH2VbqS4TNQbtIuJd6VjYP4kE4HsRsZ MkK2pEUS4GuMEdLqeJW3d5ch+u45CQVdtDLuSUH0e9j3RqQNHmZWIvp3IhXouKG+ HMeeo2RQfdn3Y7A+TJ18llVUW/2BTBKjnr1MvR+9JoZmMpkV0tnVnD19MQcKvEXK dM7Qp7apAS5KpXPTsWvRXwT4uFHoGiRpyluI2UrqEjOVhYQW4DBzfJ/GQDJ80Wd8 HFH0ZPjvi2W3jLeFqOwGYzbcMgyGe4pvkkUm1yj/EV3j5GyFSCPxOhqn4t/fJegk Vg2AMDeSf+cb504pr8AkfYF0Z0RqGBTgyKOwslgGwaRCppOHW7DZL0R6M3/5a48H 9C4z3RJ4UcTt1a93ZaV3 =0OVE -----END PGP SIGNATURE----- Merge tag 'msm-clock-for-3.11b' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/late From David Brown: MSM clock updates for 3.11. Per Stephen Boyd's coverletter: Resending to collect higher level maintainer acks per Olof's request. The plan is to push this patchset through MSM to the arm-soc tree. This patchset moves the existing MSM clock code and affected drivers to the common clock framework. A prerequisite of moving to the common clock framework is to use clk_prepare() and clk_enable() so the first few patches migrate drivers to that call (clk_prepare() is a no-op on MSM right now). It also removes some custom clock APIs that MSM provides and finally moves the proc_comm clock code to the common struct clk. This patch series will be used as the foundation of the MSM 8660/8960 clock code that I plan to send out after this series. * tag 'msm-clock-for-3.11b' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare Acked-by: Chris Ball <cjb@laptop.org> # for msm_sdcc.c Signed-off-by: Olof Johansson <olof@lixom.net> |